Flow Measurement SITRANS F US Clamp-on

Transcription

1 Overview SITS FUH1010 clamp-on non-intrusive ultrasonic flowmeter is ideal for applications carrying crude oil, refined petroleum or liquefied gas. SITS FUH1010 has three application areas: Interface detectors, precision volume or standard volume flowmeters. Benefits For all SITS FUH1010 products Easy installation; no need to cut pipe or stop flow Minimal maintenance; external sensors do not require periodic cleaning o moving parts to foul or wear o pressure drop or energy loss Wide turn-down ratio, 0:1 Choice of single, dual, or optional, three or four path versions. - Single path version reduces initial investment - Two or optional three and four path versions provide higher accuracy, especially where limited straight run or poor flow profile exists WideBeam technology - Helps provide improved accuracy over a wide range of liquid conditions and flow rates - ccommodates pipelines transporting multiple liquid products ZeroMatic ath automatically corrects for zero drift without stopping flow Interface detection Outputs liquid density and I as a direct replacement for intrusive densitometers Exceptional repeatability is maintained, independent of changes in temperature, pressure or viscosity o need for straight run recision volume Moderate cost recise measurement is maintained with automatic "eynolds umber" compensation for temperature and viscosity changes. Standard volume (High end system) Exceptional repeatability is maintained, independent of changes in temperature, density or viscosity Batch interface and product quality diagnostics provided Density and I outputs provided Scraper ( pig ) detection provided pplication Interface detection recise identification of interfaces on multi-liquid pipelines roduct identification Density indication recision volume pplications with multiple liquids having a wide viscosity range utomatic gross volume compensation due to viscosity changes Standard volume (High end system) Standard (net) volume flow measurement Suitable for use in leak detection systems Mass flow output measurement Interface detection "ig" detection Chemical and petrochemical processing Design SITS FUH1010 is available in two enclosures: I65 (EM 4X) wall mount enclosure constructed of fiberglass reinforced polyester with stainless steel hardware and polyester keypad - Single path - Dual path - Optional four path I66 (EM 7) wall mount explosionproof enclosure constructed of cast aluminum, stainless steel hardware, with glass window - Single path - Dual path - Four path (optional) There are 2 types of mounting assemblies - luminum mounting frames (default) - Stainless steel High precision mount (optional) Function I65 (EM 4X) and I66 (EM 7) flowmeters have integral button keypads and large (128 x 240 pixel) graphic displays visible up to 12 m (40 ft) away Current, voltage, status alarm, frequency outputs and communications HT, BCnet MST/BCnet I, Modbus TU & TC/I, Ethernet I, Johnson 2, VT100 S 22 (see specification section for details) nalog inputs (see specification section for details) ZeroMatic ath automatically corrects for zero drift Bidirectional flow operation 1 MByte data logger with both site and data logger storage English, Spanish, German, Italian and French language options /81

2 Technical specifications Specifications for interface detectors ccuracy ccuracy 0.05 of I o. epeatability 0.01 of I o. Specifications for volumetric and mass flowmeters Input Flow range 12 m/s ( 40 ft/s), bidirectional Flow sensitivity m/s (0.001 ft/s), flow rate independent ccuracy Typical accuracy 0.5 to 1 % of flow Calibratable accuracy 0.15 % 0. % of flow, depending on version Batch repeatability 0.05 % of flow, maximum Specifications for all SITS FUH1010 products Input ipe size 6.4 mm m ( ) nalog inputs Current: 4 x m Output Standard outputs Current: 20 m (1 k at 0 VDC) Voltage: 10 V DC (5 k minimum) ulse ate: 5 khz, Digital uad. VT100 S 22 Extended outputs HT, BCnet MST/BCnet I, Modbus TU & TC/I, Ethernet I, Johnson 2 4 x m Form C relays Digital pulse Status/larm I/O rogrammable relays Totalizer clear switch input (not for I65 (EM 4X) enclosure) 1) Totalizer hold switch input ccuracy Zero Drift m/s (0.001 ft/s), with ZeroMatic ath active (not provided for interface detector) 5 Hz Data refresh rate ated operation conditions Degree of protection Wall mount I65 (EM 4X) Wall mount explosionproof I66 (EM 7) Liquid temperature Standard C ( F) Optional C ( F) mbient temperature C ( F) Design Dimensions see "System info and selection guide" Weight ower supply I65 (EM 4X) wall mount and I66 (EM 7) wall mount explosionproof Indication and operation Data logger memory Display I65 (EM 4X) and I66 (EM 7) Enclosures Keypad I65 (EM 4X) and I66 (EM 7) Enclosures Language options see diagrams V C, Hz, 0 V or V DC, 12 W 1 MByte 128 x 240 pixel LCD with backlight keypad buttons with tactile feedback English, Spanish, German, Italian, French 1) Totalizer switch inputs are not provided for the interface detector. /82

3 Certificates and approvals I65 (EM 4X) wall mount enclosure FM and CS CE C-TICK TEX I66 (EM 7) wall mount explosionproof enclosure ratings FM and CS CE TEX Transmitter -I Class I, Div 2 S Class II, Div 2 Sensor I.S. Class I, II, Div 1 EMC Directive 2014/0/EU TEX Directive 2014/4/EU Transmitter: Ex II (1) G [Ex ia] IIC EX II (1) G Ex nc [ia] IIC T5 Sensors: Ex II 1 G Ex ia IIC T5 Transmitter X Class I, Div 1 D-I Class II, Div 1 -I Class I, Div 2 S Class II, Div 2 Sensor I.S. Class I, II, Div 1 EMC Directive 2014/0/EU TEX Directive 2014/4/EU Transmitter: Ex II (1) G [Ex ia] IIC Ex II (1) G Ex nc [ia] IIC T5 Ex II 2 (1) G Ex d [ia IIC] IIB + H2 T5 Sensors: Ex II 1 G Ex ia IIC T5 /8

4 Standard MLFB for quick delivery on Selection and Ordering data rticle o. Order code 7 M E K K Click on the rticle o. for the online configuration in the I Life Cycle ortal. Design I65 (EM 4X) wall mount 0 umber of ultrasonic paths/meter type Dual path Standard Volume 4 Flowmeter functions and I/O configurations includes graphic or digital display, I66 (BB6665 (EM 4X)) and I66 (EM 7) wall mount explosionproof units: Standard I/O - Graphic display - 2 x V - 2 x m (active) - 2 x khz pulse outputs (TTL) - 4 x form C relays - 4 x logic inputs (totalizer control, TTL) - 4 x m analog input - 1 x t100 TD input per channel Meter power options V C Communication options VT100 S 22 0 TD temperature sensor (includes mounting hardware for pipes above 1.5 /8 mm OD) o TDs 0 1 x standard clamp-on TD 1 2 x standard clamp-on TD 2 1 x submersible clamp-on TD 2 x submersible clamp-on 4 TD otes: 1. Temperature input is required for SITS FUH1010 systems 2. Only the Interface detector set up as a dual channel can use 2 TD s Sensor for channel 1 (includes pipe mounting kit and spacer bar for indicated max. outer diam. listed) C2H (high precision) 1) 600 mm (24") D1H (high precision) 1) D4H (high precision) 1) D1H (high precision) 1) High Temperature to 104 C/220 F Z 1 Sensor for channel 2 (includes pipe mounting kit and spacer bar for indicated max. OD listed) See "Sensor selection charts" for specifications. C2H (high precision) 1) 600 mm (24") D1H (high precision) 1) D4H (high precision) 1) D1H (high precision) 1) High Temperature to 104 C/220 F Z 1 pprovals FM/CS/CE (default) 1 TEX, CE, C-TICK 2 Standard MLFB product offering represents 4 to 6 weeks delivery time 1) Made with stainless steel constuction. For sensor and TD cables for quick delivery see tables at end of section. /84

5 Selection and Ordering data rticle o. Ord. code I65 (EM 4X) wall mount I66 (EM 7) wall mount explosionproof 7ME600-7ME60- Click on the rticle o. for the online configuration in the I Life Cycle ortal. umber of ultrasonic paths/meter type Single path (precision volume) 0 Single path (interface detector) 1 Dual channel/dual path (interface detector) 2 Dual path (precision volume) Dual path (standard volume/mass) 4 Special: Four path (standard volume/mass) 9 H 1 only Flowmeter functions and I/O configurations Includes graphic or digital display I65 (EM 4X) wall mount and I66 (EM 7 wall mount explosionsproof) units Standard I/O - Graphic display - 2 x V - 2 x m (active) - 2 x khz pulse outputs (TTL) - 4 x form C relays - 4 x logic inputs (totalizer control, TTL) - 4 x m analog input - 1 x t100 TD input per channel (Dual channel/path) - 1 x t100 TD input (Multi channel/path) Extended I/O C - Graphic display - 2 x V - 2 x m (active) - 2 x m (passive) - 2 x khz pulse outputs (TTL or OC) - 4 x form C relays - 4 x logic inputs (totalizer control, TTL) - 4 x m analog input - 1 x t100 TD input per channel (Dual channel/path) - 1 x t100 TD input (Multi channel/path) Meter power options V C V DC B Communication options VT100 S 22 0 HT, BCnet MST/BCnet I, Modbus TU 2 & TC/I, Ethernet I, Johnson 2, VT100 S 22 Selection and Ordering data rticle o. Ord. code I65 (EM 4X) wall mount 7ME600- I66 (EM 7) wall mount explosionproof 7ME60- TD temperature sensor (includes mounting hardware for pipes above 1.5 OD) o TDs (ote: temperature input is required 0 for SITS FUH systems) 1 x Standard clamp-on TD 1 2 x Standard clamp-on TD 2) 2 1 x Submersible clamp-on TD 2 x Submersible clamp-on TD 2) 4 Sensor for channel/path 1 (includes standard pipe mounting kit and spacer bar for indicated max. outer diameter listed) See "Sensor selection charts" for specifications. (-40 F to +248 F), nominal 21 C (70 F): 2H (high precision) Trackmount and straps H 75 mm ( ) H (high precision) Trackmount and straps J 75 mm ( ) B1H (high precision) Trackmount and straps K B2H (high precision) Trackmount and straps L BH (high precision) Trackmount and straps T C1H (high precision) C2H (high precision) D1H (high precision) D2H (high precision) DH (high precision) D4H (high precision) M U /85

6 Selection and Ordering data rticle o. Ord. code I65 (EM 4X) wall mount 7ME600- I66 (EM 7) wall mount explosionproof 7ME60- Sensor for channel/path 1 (continued) (-40 F to +248 F), nominal 65 C (150 F): B1H (high temperature range H) Z 1 K B2H (high temperature range H) Z 1 L BH (high temperature range H) Z 1 T C1H (high temperature range H) Z 1 M C2H (high temperature range H) Z 1 D1H (high temperature range H) 1) Z 1 D2H (high temperature range H) 1) Z 1 DH (high temperature range H) 1) Z 1 U D4H (high temperature range H) 1) Z 1 Sensor for channel/path 2 (includes pipe mounting kit and spacer bar for indicated max. outer diameter listed) See "Sensor selection charts" for specifications. (-40 F to +248 F), nominal 21 C (70 F): 2H (high precision) Trackmount and straps H 75 mm ( ) H (high precision) Trackmount and straps J 75 mm ( ) B1H (high precision) Trackmount and straps K B2H (high precision) Trackmount and straps L BH (high precision) Trackmount and straps T C1H (high precision) M C2H (high precision) D1H (high precision) D2H (high precision) DH (high precision) D4H (high precision) U Selection and Ordering data rticle o. Ord. code I65 (EM 4X) wall mount I66 (EM 7) wall mount explosionproof 7ME600-7ME60- (-40 F to +248 F), nominal 65 C (150 F): B1H (high temperature range H) Z 1 K B2H (high temperature range H) Z 1 L BH (high temperature range H) Z 1 T C1H (high temperature range H) Z 1 M C2H (high temperature range H) Z 1 D1H (high temperature range H) 1) Z 1 D2H (high temperature range H) 1) Z 1 DH (high temperature range H) 1) Z 1 U D4H (high temperature range H) 1) Z 1 pprovals FM/CS/CE/C-TICK (default), also for non 1 hazardous area TEX 2 1) Supplied spacer bar supports pipes up to 750 mm (0 inch). For pipes larger than 750 mm (0 inch) purchase also, spare part 7ME960-0MS40 (1012B-4). 2) Dual channel interface detector only Made with stainless steel construction. Selection and Ordering data Further designs lease add "-Z" to rticle o. and specify Order code(s). Cable assembly for sensors (add for # of paths) See "Sensor cable selection chart" Cable assembly for TDs (add for # of TDs) See "TD cable selection chart" Cable termination kit (for one cable pair) Termination for standard, plenum and armored sensor cable Termination for submersible cable TD cable termination kit for standard TD TD cable termination kit for submersible TD Cable gland kit Tag name plate Stainless steel tags with.2 mm (0.1 inch) characters (68 characters max.) Order code K.... T01 T11 T21 T1 T51 Y19 /86

7 Selection and Ordering data rticle o. Operating Instructions for SITS FUH1010 English EM 4X & EM 7 wall mount 5E Standard Volume German EM 4X & EM 7 wall mount 5E Standard Volume English EM 4X & EM 7 CO:1010VFM- wall mount explosionproof recision Volume English EM 4X & EM 7 5E wall mount explosionproof Interface Detector ll literature is available to download for free, in a range of languages, at MLFB example pplication example clamp-on meter is required for a 12 carbon steel hydrocarbon line flowing multiple products, with a wall thickness of 12.7 mm (0.5 ). Meter electronics are to be located in a Class I Div 2 area only 60 ft from the pipeline. 12 V DC power is available at the site. Dual path operation is desired for improved accuracy and redundant measurement. ulse output will be primary flow data source. MLFB rticle o.: 7ME600-CB00-1-Z K0 + K0 + 0 Selection and Ordering data rticle o. Ord. code SITS FUH1010 meter 7 M E family I65 (EM 4X) enclosure 0 Dual path precision volume Custody Transfer option with C digital pulse V DC power option B VT100 S 22 0 TD required for viscosity comp Sensor code for path 1 Sensor code for path 2 FM approval required 1 0 m (100 ft) sensor cable for path 1 K 0 0 m (100 ft) sensor cable for path 2 K 0 0 m (100 ft) cable for TD 0 High precision sensor selection chart I68 1) Made with stainless steel construction. Sensor Cable Selection Chart Sensor cable codes for length and type options 1) Standard MLFB for quick delivery TD Cable Selection Chart TD cable codes for length and type 1) Standard MLFB for quick delivery Based on pipe wall thickness (steel pipes only) Sensor Order ipe wall (mm) ipe wall (inch) ipe wall Code min. max. min. max. 1H G H H H J B1H K B2H L C1H 1) M C2H 1) D1H 1) D2H 1) D4H 1) BH 1) T DH 1) U Cable length m (ft) Standard (VC jacket) C ( F) Submersible (polyethylene jacket) C ( F) lenum ated (teflon jacket) C ( F) rmored Order code 6 (20) K01 1) K11 K21 K1 15 (50) K02 K12 1) K22 K2 1) 0 (100) K0 1) K1 1) K2 K 46 (150) K04 1) K14 K24 K4 61 (200) K05 K15 K25 K5 91 (00) K06 K16 K26 K6 Cable length m (ft) Standard (teflon wrapped) C ( F) Order code 6 (20) 01 1) (50) 02 1) 12 0 (100) 0 1) 1 46 (150) (200) (00) C ( F) Submersible (extruded jacket) C ( F) /87