SN75476 THRU SN75478 DUAL PERIPHERAL DRIVERS
|
|
- Tyler Cobb
- 5 years ago
- Views:
Transcription
1 N7476 TRU N7478 DUA PERIPERA DRIVER R02A DECEMBER 976 REVIED NOVEMBER 99 Characterized for Use to 00 ma No Output atch-up at V (After Conducting 00 ma) igh-voltage Outputs (00 V Typ) Output Clamp Diodes for Transient uppression (00 ma, 70 V) TT- or MO-Compatible Diode-Clamped Inputs pnp Transistor Inputs Reduce Input Current tandard upply Voltage uitable for ammer-driver Applications Plastic DIP (P) With Copper-ead Frame Provides Cooler Operation and Improved Reliability description The N7476 through N7478 are dual peripheral drivers designed for use in systems that require high current, high voltage, and fast switching times. The N7476, N7477, and N7478 provide AND, NAND, and OR drivers respectively. These devices have diode-clamped inputs as well as high-current, high-voltage clamp diodes on the outputs for inductive transient protection. The N7476, N7477, and N7478 drivers are characterized for operation from 0 C to 70 C. schematics of inputs and outputs A Y GND D OR P PACKAGE (TOP VIEW) Function Tables N7476 (each AND driver) INPUT A X X V CC 2A 2Y OUTPUT Y N7477 (each NAND driver) INPUT A X X INPUT A X N7478 (each OR driver) X OUTPUT Y OUTPUT Y VCC EQUIVAENT OF EAC INPUT TYPICA OF A OUTPUT Output = high level, = low level X = irrelevant Input GND PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright 99, Texas Instruments Incorporated POT OFFICE BOX 60 DAA, TEXA 726 POT OFFICE BOX 44 OUTON, TEXA
2 N7476 TRU N7478 DUA PERIPERA DRIVER R02A DECEMBER 976 REVIED NOVEMBER 99 logic symbols logic diagrams (positive logic) A 2A 2 7 N7476 & 6 Y 2Y A 2A 2 7 N Y 2Y 4 GND Positive ogic: Y = A or A+ A 2A 2 7 N7477 & 6 Y 2Y A 2A 2 7 N Y 2Y 4 GND Positive ogic: Y = A or A+ A 2A 2 7 N Y 2Y A 2A 2 7 N Y 2Y 4 GND These symbols are in accordance with ANI/IEEE td and IEC publication Positive ogic: Y = A+ or A 2 POT OFFICE BOX 60 DAA, TEXA 726 POT OFFICE BOX 44 OUTON, TEXA
3 N7476 TRU N7478 DUA PERIPERA DRIVER R02A DECEMBER 976 REVIED NOVEMBER 99 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) NOTE: upply voltage, V CC (see Note ) V Input voltage, V I V Continuous output current (see Note 2) ma Peak output current: t w 0 ms, duty cycle 0% ma t w 0 ns, duty cycle 0.002% A Output clamp current, I OK ma Continuous total power dissipation ee Dissipation Rating Table Operating free-air temperature range, T A C to 70 C torage temperature range, T stg C to 0 C ead temperature,6 mm (/6 inch) from case for 0 seconds C. Voltage values are with respect to network GND. 2. Both halves of this dual circuit may conduct rated current simultaneously; however, power dissipation averaged over a short time interval must fall within the continuous power dissipation ratings. PACKAGE recommended operating conditions DIIPATION RATING TABE TA A 2 C DERATING FACTOR TA A = 70 C POWER RATING ABOVE TA = 2 C POWER RATING D 72 mw.8 mw/ C 464 mw P 000 mw 8.0 mw/ C 640 mw MIN NOM MAX UNIT upply voltage, VCC 4.. V igh-level input voltage, VI 2 V ow-level input voltage, VI 0.8 V Operating free-air temperature, TA 0 70 C POT OFFICE BOX 60 DAA, TEXA 726 POT OFFICE BOX 44 OUTON, TEXA
4 N7476 TRU N7478 DUA PERIPERA DRIVER R02A DECEMBER 976 REVIED NOVEMBER 99 electrical characteristics over recommended operating free-air temperature range PARAMETER TET CONDITION MIN TYP MAX UNIT VIK Input clamp voltage II = 2 ma 0.9. V VO ow-level output voltage IO = 00 ma VCC = 4. V, VI = 2 V, IO = 7 ma V VI = 0.8 V IO = 00 ma VO(BR) Output breakdown voltage VCC = 4. V, IO = 00 µa V VR(K) Output clamp reverse voltage VCC = 4. V, IR = 00 µa V VF(K) Output clamp forward voltage VCC = 4. V, IF = 00 ma V VCC = 4. V, VI = 2 V, IO igh-level output current VI = 0.8 V, VO = 70 V 00 µa II igh-level input current VCC =. V, VI =. V µa II ow-level input current A input input VCC =V. V, VI = 0.8 V N7476 VI = V 0 7 ICC upply current, outputs high N7477 VCC =. V VI = ma N7478 VI = V 0 7 N7476 VI = ICC upply current, outputs low N7477 VCC =. V VI = V 4 7 ma All typical values are at VCC = V, TA = 2 C. switching characteristics, V CC = V, T A = 2 C N7478 VI = PARAMETER TET CONDITION MIN TYP MAX UNIT tp Propagation delay time, low-to-high-level output ns tp Propagation delay time, high-to-low-level output C = pf, R = 00 Ω,, ns tt Transition time, low-to-high-level output ee Figure 0 2 ns tt Transition time, high-to-low-level output 90 2 ns V = V, VO igh-level output voltage after switching ee Figure 2 IO O 00 ma, µa V 8 mv 4 POT OFFICE BOX 60 DAA, TEXA 726 POT OFFICE BOX 44 OUTON, TEXA
5 N7476 TRU N7478 DUA PERIPERA DRIVER PARAMETER MEAUREMENT INFORMATION R02A DECEMBER 976 REVIED NOVEMBER 99 Input 2.4 V VCC 0 V N7476 N7477 R = 00 Ω Pulse Generator (see Note A) A/ /A Circuit Under Test Output C = pf (see Note B) N V TET CIRCUIT Open N7446 N7448 N7447 Input Input Output 2.7 V. V ns 0.7 V ns 2.7 V 2.7 V. V. V 0.7 V 0.7 V tp µs 0.7 V tp 0% 0% 0% 0% 0 ns 90% 90% tt 2.7 V. V 0 ns V tt 0 V V 0 V VO VO VOTAGE WAVEFORM NOTE: A. The pulse generator has the following characteristics: PRR = 00 kz, ZO = 0 Ω. B. C includes probe and jig capacitance. Figure. Test Circuit and Voltage Waveforms, witching Characteristics POT OFFICE BOX 60 DAA, TEXA 726 POT OFFICE BOX 44 OUTON, TEXA
6 N7476 TRU N7478 DUA PERIPERA DRIVER R02A DECEMBER 976 REVIED NOVEMBER 99 PARAMETER MEAUREMENT INFORMATION V = V Input 2.4 V V N7476 N m 80 Ω Pulse Generator (see Note A) A Circuit Under Test Output C = pf (see Note B) N7478 GND 0.4 V TET CIRCUIT N7476 N7478 N7477 Input Input 90%. V ns 0% ns 40 µs 0% 90%. V 90% 90%. V. V 0% 0% 0 ns 0 ns V 0 V V 0 V VO Output VO VOTAGE WAVEFORM NOTE: A. The pulse generator has the following characteristics: PRR = 2. kz, ZO = 0 Ω. B. C includes probe and jig capacitance. Figure 2. atch-up Test Circuit and Voltage Waveforms 6 POT OFFICE BOX 60 DAA, TEXA 726 POT OFFICE BOX 44 OUTON, TEXA
7 PACKAGE OPTION ADDENDUM 24-Aug-208 PACKAGING INFORMATION Orderable Device tatus () Package Type Package Drawing Pins Package Qty Eco Plan N7477D ACTIVE OIC D 8 7 Green (Ro & no b/br) N7477DE4 ACTIVE OIC D 8 7 Green (Ro & no b/br) N7477DG4 ACTIVE OIC D 8 7 Green (Ro & no b/br) N7477DR ACTIVE OIC D Green (Ro & no b/br) N7477DRE4 ACTIVE OIC D Green (Ro & no b/br) N7477P ACTIVE PDIP P 8 0 Green (Ro & no b/br) N7477PE4 ACTIVE PDIP P 8 0 Green (Ro & no b/br) N7478P ACTIVE PDIP P 8 0 Green (Ro & no b/br) (2) ead/ball Finish (6) M Peak Temp () Op Temp ( C) Device Marking (4/) CU NIPDAU evel--260c-unim 0 to CU NIPDAU evel--260c-unim 0 to CU NIPDAU evel--260c-unim 0 to CU NIPDAU evel--260c-unim 0 to CU NIPDAU evel--260c-unim 0 to CU NIPDAU N / A for Pkg Type 0 to 70 N7477P CU NIPDAU N / A for Pkg Type 0 to 70 N7477P CU NIPDAU N / A for Pkg Type 0 to 70 N7478P amples () The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. IFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. amples may or may not be available. OBOETE: TI has discontinued the production of the device. (2) Ro: TI defines "Ro" to mean semiconductor products that are compliant with the current EU Ro requirements for all 0 Ro substances, including the requirement that Ro substance do not exceed 0.% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "Ro" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". Ro Exempt: TI defines "Ro Exempt" to mean products that contain lead but are compliant with EU Ro pursuant to a specific EU Ro exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet J709B low halogen requirements of <=000ppm threshold. Antimony trioxide based flame retardants must also meet the <=000ppm threshold requirement. () M, Peak Temp. - The Moisture ensitivity evel rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. Addendum-Page
8 PACKAGE OPTION ADDENDUM 24-Aug-208 () Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) ead/ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. ead/ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CA numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2
9 PACKAGE MATERIA INFORMATION 6-ep-208 TAPE AND REE INFORMATION *All dimensions are nominal Device Package Type Package Drawing Pins PQ Reel Diameter (mm) Reel Width W (mm) A0 (mm) B0 (mm) K0 (mm) P (mm) W (mm) Pin Quadrant N7477DR OIC D Q Pack Materials-Page
10 PACKAGE MATERIA INFORMATION 6-ep-208 *All dimensions are nominal Device Package Type Package Drawing Pins PQ ength (mm) Width (mm) eight (mm) N7477DR OIC D Pack Materials-Page 2
11
12
13
14 IMPORTANT NOTICE AND DICAIMER TI PROVIDE TECNICA AND REIABIITY DATA (INCUDING DATAEET), DEIGN REOURCE (INCUDING REFERENCE DEIGN), APPICATION OR OTER DEIGN ADVICE, WEB TOO, AFETY INFORMATION, AND OTER REOURCE A I AND WIT A FAUT, AND DICAIM A WARRANTIE, EXPRE AND IMPIED, INCUDING WITOUT IMITATION ANY IMPIED WARRANTIE OF MERCANTABIITY, FITNE FOR A PARTICUAR PURPOE OR NON-INFRINGEMENT OF TIRD PARTY INTEECTUA PROPERTY RIGT. These resources are intended for skilled developers designing with TI products. You are solely responsible for () selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and () ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI s products are provided subject to TI s Terms of ale ( or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI s provision of these resources does not expand or otherwise alter TI s applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 60, Dallas, Texas 726 Copyright 208, Texas Instruments Incorporated
SN75476 THRU SN75478 DUAL PERIPHERAL DRIVERS
N TRU N8 DUA PERIPERA DRIVER R0 DECEMBER 9 REVIED NOVEMBER 99 Characterized for Use to 00 ma No atch-up at V (After Conducting 00 ma) igh-voltage s (0 Typ) Clamp Diodes for Transient uppression (00 ma,
More informationSN75446, SN75447 DUAL PERIPHERAL DRIVERS
, DUA PERIPERA DRIVER R00A DECEMBER 98 REVIED NOVEMBER 99 Very ow Power Requirements Very ow Input Current Characterized for Use to 0 ma No atch-up at (After Conducting 00 ma) igh-voltage s ( Min) Clamp
More informationData sheet acquired from Harris Semiconductor SCHS038C Revised October 2003
Data sheet acquired from Harris Semiconductor SCHS038C Revised October 2003 The CD4035B types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line plastic packages
More informationRelated Synchronous MOSFET Drivers DEVICE NAME ADDITIONAL FEATURES INPUTS TPS2830. Noninverted TPS2831. Inverted TPS2834. Noninverted TPS2835
Floating Bootstrap or Ground-Reference High-Side Driver Adaptive Dead-Time Control 50-ns Max Rise/Fall Times and 00-ns Max Propagation Delay 3.3-nF Load Ideal for High-Current Single or Multiphase Power
More informationdescription/ordering information
Qualified for Automotive Applications ESD Protection Exceeds 1500 V Per MI-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pf, R = 0) Wide Operating Voltage Range of 2 V to 6 V Outputs
More informationSN5406, SN5416, SN7406, SN7416 HEX INVERTER BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS SDLS031A DECEMBER 1983 REVISED DECEMBER 2001
SN5406, SN5416, SN7406, SN7416 HEX INVERTER BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS SDLS031A DECEMBER 1983 REVISED DECEMBER 2001 Convert TTL Voltage Levels to MOS Levels High Sink-Current
More informationSN54BCT652, SN74BCT652 OCTAL BUS TRANSCEIVERS AND REGISTERS WITH 3-STATE OUTPUTS
SN54BCT65, SN74BCT65 OCTA BUS TRANSCEIVERS AND REGISTERS WITH -STATE OUTPUTS SCBS08A AUGUST 989 REVISED NOVEMBER 99 State-of-the-Art BiCMOS Design Significantly Reduces I CCZ ESD Protection Exceeds 000
More informationSN54ALS32, SN54AS32, SN74ALS32, SN74AS32 QUADRUPLE 2-INPUT POSITIVE-OR GATES
SN54ALS32, SN54AS32, SN74ALS32, SN74AS32 QUADRUPLE 2-INPUT POSITIVE-OR GATES SDAS113B APRIL 1982 REVISED DECEMBER 1994 Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers
More informationSN75471 THRU SN75473 DUAL PERIPHERAL DRIVERS
SN747 THRU SN747 DUAL PERIPHERAL DRIVERS SLRS024 DECEMBER 976 REVISED MAY 990 PERIPHERAL DRIVERS FOR HIGH-VOLTAGE HIGH-CURRENT DRIVER APPLICATIONS Characterized for Use to 00 ma High-Voltage Outputs No
More informationSN75158 DUAL DIFFERENTIAL LINE DRIVER
SN7558 DUAL DIFFERENTIAL LINE DRIVER Meets or Exceeds the Requirements of ANSI EIA/TIA-422-B and ITU Recommendation V. Single 5-V Supply Balanced-Line Operation TTL Compatible High Output Impedance in
More informationSN75157 DUAL DIFFERENTIAL LINE RECEIVER
SN75157 DUAL DIFFERENTIAL LINE RECEIVER Meets or Exceeds the Requirements of ANSI Standards EIA/TIA-422-B and EIA/TIA-423-B and ITU Recommendation V.1 and V.11 Operates From Single 5-V Power Supply Wide
More informationdescription/ordering information
SCLS087E DECEMBER 1982 REVISED AUGUST 2003 Wide Operating Voltage Range of 2 V to 6 V Outputs Can Drive Up To 10 LSTTL Loads Low Power Consumption, 20-µA Max I CC Typical t pd = 11 ns ±4-mA Output Drive
More informationua9637ac DUAL DIFFERENTIAL LINE RECEIVER
ua9637ac DUAL DIFFERENTIAL LINE RECEIVER Meets or Exceeds the Requirements of ANSI Standards EIA/TIA-422-B and EIA/TIA-423-B and ITU Recommendations V.10 and V.11 Operates From Single 5-V Power Supply
More informationORDERING INFORMATION. TOP-SIDE MARKING PDIP N Tube SN74S1051N SN74S1051N
Designed to Reduce Reflection Noise Repetitive Peak Forward Current to 200 ma 12-Bit Array Structure Suited for Bus-Oriented Systems description/ordering information This Schottky barrier diode bus-termination
More informationSN75207B DUAL SENSE AMPLIFIER FOR MOS MEMORIES OR DUAL HIGH-SENSITIVITY LINE RECEIVERS
Plug-In Replacement for SN75107A and SN75107B With Improved Characteristics ± 10-mV Input Sensitivity TTL-Compatible Circuitry Standard Supply Voltages... ±5 V Differential Input Common-Mode Voltage Range
More informationua9636ac DUAL LINE DRIVER WITH ADJUSTABLE SLEW RATE
SLLSB OCTOBER 9 REVISED MAY 995 Meets or Exceeds the Requirements of ANSI Standards EIA/TIA-3-B and -3-E and ITU Recommendations V. and V. Output Slew Rate Control Output Short-Circuit-Current Limiting
More informationAVAILABLE OPTIONS PACKAGE SMALL OUTLINE (D) The D package is available taped and reeled. Add the suffix R to the device type (i.e., LT1030CDR).
LT1030C QUADRUPLE LOW-POWER LINE DRIVER Low Supply Voltage... ±5 V to ±15 V Supply Current...500 µa Typical Zero Supply Current When Shut Down Outputs Can Be Driven ±30 V Output Open When Off (3-State)
More informationMC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A QUADRUPLE LINE RECEIVERS
MC489, MC489A, SN5589, SN5589A, SN7589, SN7589A QUADRUPLE LINE RECEIVERS SLLS095D SEPTEMBER 973 REVISED OCTOBER 998 Input Resistance...3 kω to 7 kω Input Signal Range...±30 V Operate From Single 5-V Supply
More informationdescription SH/LD CLK CLK INH D C E F B A SER Q H GND SH/LD CLK V CC D C E F G H B A GND SER CLK INH
Complementary Outputs Direct Overriding oad (Data) Inputs Gated Clock Inputs Parallel-to-erial Data Conversion Package Options Include Plastic mall-outline (D) Packages, Ceramic Chip Carriers (FK), and
More informationLM2900, LM3900 QUADRUPLE NORTON OPERATIONAL AMPLIFIERS
LM29, LM39 QUADRUPLE NORTON OPERATIONAL AMPLIFIERS SLOS59 JULY 1979 REVISED SEPTEMBER 199 Wide Range of Supply Voltages, Single or Dual Supplies Wide Bandwidth Large Output Voltage Swing Output Short-Circuit
More informationSN75150 DUAL LINE DRIVER
SN75150 DUAL LINE DRIVER Meets or Exceeds the Requirement of TIA/EIA-232-F and ITU Recommendation V.28 Withstands Sustained Output Short Circuit to Any Low-Impedance Voltage Between 25 V and 25 V 2-µs
More informationORDERING INFORMATION. QFN RGY Tape and reel SN74CBT3257RGYR CU257. SOIC D Tape and reel SN74CBT3257DR
SN74CBT3257 4-BIT 1-OF-2 FET MULTIPLEXER/DEMULTIPLEXER SCDS017M MAY 1995 REVISED JANUARY 2004 5-Ω Switch Connection Between Two Ports TTL-Compatible Input Levels D, DB, DBQ, OR PW PACKAGE (TOP VIEW) RGY
More informationSN74LVC138A-Q1 3-LINE TO 8-LINE DECODER/DEMULTIPLEXER SCAS708B SEPTEMBER 2003 REVISED FEBRUARY 2008
1 1FEATURES Qualified for Automotive Applications ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pf, R = 0) Operates From 2 V to 3.6 V Inputs Accept
More informationVOLTAGE PROTECTION FOR 2-, 3-, OR 4-CELL Lion BATTERIES (2 nd PROTECTION)
Not Recommended for New Designs: bq900, bq900a, bq90 FEATURES FUNCTION -, -, or -Cell Secondary Protection Each cell in a multiple cell pack is compared to an Low Power Consumption I CC < µa internal reference
More informationdescription TPS3836, TPS3838 DBV PACKAGE (TOP VIEW) V DD GND RESET TPS3837 DBV PACKAGE (TOP VIEW)
М TPS3836E18-Q1 / J25-Q1 / H30-Q1 / L30-Q1 / K33-Q1 Qualified for Automotive Applications Customer-Specific Configuration Control Can Be Supported Along With Major-Change Approval ESD Protection Exceeds
More informationORDERING INFORMATION PACKAGE
5-Ω Switch Connection Between Two Ports TTL-Compatible Input Levels Designed to Be Used in Level-Shifting Applications description/ordering information The SN74CBTD3861 provides ten bits of high-speed
More informationdescription/ordering information
AC Types Feature 1.5-V to 5.5-V Operation and Balanced Noise Immunity at 30% of the Supply Speed of Bipolar F, AS, and S, With Significantly Reduced Power Consumption Balanced Propagation Delays ±24-mA
More informationPACKAGE OPTION ADDENDUM www.ti.com 17-Mar-2017 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish (6) MSL Peak Temp (3) Op Temp
More information5-V/3.3-V CMOS Outputs 5-V/3.3-V Input Down to 2.5-V Output Level I off Supports Partial-Power-Down Mode Shift With 2.5-V V CC
SN74CB3T3257 4-BIT 1-OF-2 FET MULTIPLEXER/DEMULTIPLEXER 2.5-V/3.3-V LOW-VOLTAGE BUS SWITCH WITH 5-V-TOLERANT LEVEL SHIFTER FEATURES Low Power Consumption (I CC = 20 µa Max) Output Voltage Translation Tracks
More informationdescription logic diagram (positive logic) logic symbol
SDAS074B APRIL 1982 REVISED JANUARY 1995 AS1004A Offer High Capacitive-Drive Capability Driver Version of ALS04B and AS04 Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers
More informationSN5406, SN5416, SN7406, SN7416 HEX INVERTER BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS
Convert TTL Voltage Levels to MOS Levels High Sink-Current Capability Input Clamping Diodes Simplify System Design Open-Collector Drivers for Indicator Lamps and Relays Inputs Fully Compatible With Most
More informationCD4066B CMOS QUAD BILATERAL SWITCH
15-V Digital or ±7.5-V Peak-to-Peak Switching 125-Ω Typical On-State Resistance for 15-V Operation Switch On-State Resistance Matched to Within 5 Ω Over 15-V Signal-Input Range On-State Resistance Flat
More informationSN54ACT16240, 74ACT BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
Members of the Texas Instruments Widebus Family Inputs Are TTL-Voltage Compatible 3-State Outputs Drive Bus Lines or Buffer Memory Address Registers Flow-Through Architecture Optimizes PCB Layout Distributed
More informationORDERING INFORMATION. SOIC DW Tape and reel SN74CBT3384ADWR
SN74CBT3384A 10-BIT FET BUS SWITCH SCDS004L NOVEMBER 1992 REVISED JANUARY 2004 5-Ω Switch Connection Between Two Ports TTL-Compatible Input Levels description/ordering information The SN74CBT3384A provides
More informationSN55451B, SN55452B, SN55453B, SN55454B SN75451B, SN75452B, SN75453B, SN75454B DUAL PERIPHERAL DRIVERS
PERIPHERAL DRIVERS FOR HIGH-CURRENT SWITCHING AT VERY HIGH SPEEDS Characterized for Use to 00 ma High-Voltage Outputs No Output Latch-Up at 0 V (After Conducting 00 ma) High-Speed Switching Circuit Flexibility
More informationSN75124 TRIPLE LINE RECEIVER
SN75124 TRIPLE LINE RECEIER Meets or Exceeds the Requirements of IBM System 360 Input/Output Interface Specification Operates From Single 5- Supply TTL Compatible Built-In Input Threshold Hysteresis High
More informationSINGLE INVERTER GATE Check for Samples: SN74LVC1G04
1 SN74LVC1G04 www.ti.com SCES214Z APRIL 1999 REVISED NOVEMBER 2012 SINGLE INVERTER GATE Check for Samples: SN74LVC1G04 1FEATURES 2 Available in the Texas Instruments NanoFree I off Supports Live Insertion,
More informationSN54ALS139, SN74ALS139 DUAL 2-LINE TO 4-LINE DECODERS/DEMULTIPLEXERS
SN54ALS9, SN74ALS9 DUAL 2-LINE TO 4-LINE DECODERS/DEMULTIPLEXERS Designed Specifically for High-Speed Memory Decoders and Data Transmission Systems Incorporate Two Enable Inputs to Simplify Cascading and/or
More informationCD54HCT258, CD74HCT258 QUADRUPLE 2-LINE TO 1-LINE SELECTORS/MULTIPLEXERS WITH 3-STATE OUTPUTS
4.5-V to 5.5-V V CC Operation Wide Operating Temperature Range of 55 C to 125 C Balanced Propagation Delays and Transition Times Standard Outputs Drive Up To 10 LS-TTL Loads Significant Power Reduction
More information74ACT11245 OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS
74ACT11245 OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS SCAS031C JULY 1987 REVISED APRIL 1996 3-State Outputs Drive Bus Lines Directly Inputs Are TTL-Voltage Compatible Flow-Through Architecture Optimizes
More informationSN74CBT3861DWR 10-BIT FET BUS SWITCH. description. logic diagram (positive logic)
SN74CBT3861 10-BIT FET BUS SWITCH SCDS061D APRIL 1998 REVISED OCTOBER 2000 5-Ω Switch Connection Between Two Ports TTL-Compatible Input Levels Latch-Up Performance Exceeds 250 ma Per JESD 17 description
More information1 to 4 Configurable Clock Buffer for 3D Displays
1 S3 GND S4 4 5 6 CLKIN 3 CLKOUT3 S1 2 Top View CLKOUT4 S2 1 7 8 9 OE 12 11 10 CLKOUT1 VDD CLKOUT2 CDC1104 SCAS921 SEPTEMBER 2011 1 to 4 Configurable Clock Buffer for 3D Displays Check for Samples: CDC1104
More informationCD74AC251, CD74ACT251
Data sheet acquired from Harris Semiconductor SCHS246 August 1998 CD74AC251, CD74ACT251 8-Input Multiplexer, Three-State Features Buffered Inputs Typical Propagation Delay - 6ns at V CC = 5V, T A = 25
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 500-mA Rated Collector Current (Single Output) High-Voltage Outputs...50
More informationDUAL RS-232 DRIVER/RECEIVER WITH IEC PROTECTION
1 TRS232E www.ti.com... SLLS791C JUNE 2007 REVISED SEPTEMBER 2008 DUAL RS-232 DRIVER/RECEIVER WITH IEC61000-4-2 PROTECTION 1FEATURES 2 Meets or Exceeds TIA/RS-232-F and ITU Recommendation V.28 Operates
More informationThe ULN2003AI has a 2.7-kΩ series base resistor for each Darlington pair for operation directly with TTL or 5-V CMOS devices. ORDERING INFORMATION
查询 ULN23AI 供应商 www.ti.com FEATURES 5-mA-Rated Collector Current (Single Output) High-Voltage Outputs... 5 V Output Clamp Diodes Inputs Compatible With Various Types of Logic Relay-Driver Applications DESCRIPTION/ORDERING
More informationMC3486 QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUTS
Meets or Exceeds the Requirements of ANSI Standards EIA/TIA-422-B and EIA/TIA-423-B and ITU Recommendations V.10 and V.11 3-State, TTL-Compatible s Fast Transition Times Operates From Single 5-V Supply
More informationSN54ABT125, SN74ABT125 QUADRUPLE BUS BUFFER GATES WITH 3-STATE OUTPUTS
Typical V OLP (Output Ground Bounce)
More informationNOT RECOMMENDED FOR NEW DESIGNS USE CDCVF2510A AS A REPLACEMENT
CDCVF2510 3.3-V PHASE-LOCK LOOP CLOCK DRIVER FEATURES Designed to Meet and Exceed PC133 SDRAM Registered DIMM Specification Rev. 1.1 Spread Spectrum Clock Compatible Operating Frequency 50 MHz to 175 MHz
More informationSN75158 DUAL DIFFERENTIAL LINE DRIVER
SN78 Meets or Exceeds the Requirements of ANSI EIA/TIA--B and ITU Recommendation V. Single -V Supply Balanced-Line Operation TTL Compatible High Output Impedance in Power-Off Condition High-Current Active-Pullup
More informationORDERING INFORMATION T A PACKAGE ORDERABLE PART NUMBER. SOIC D Tape and reel SN74CBTD3306DR 40 C to85 C
5-Ω Switch Connection Between Two Ports TTL-Compatible Input Levels Designed to Be Used in Level-Shifting Applications description/ordering information The SN74CBTD3306 features two independent line switches.
More informationdescription/ordering information
µ SLVS060K JUNE 1976 REVISED APRIL 2005 3-Terminal Regulators Output Current Up To 500 ma No External Components High Power-Dissipation Capability Internal Short-Circuit Current Limiting Output Transistor
More informationLP324, LP2902 ULTRA-LOW-POWER QUADRUPLE OPERATIONAL AMPLIFIERS
www.ti.com FEATURES Low Supply Current... 85 µa Typ Low Offset Voltage... 2 mv Typ Low Input Bias Current... 2 na Typ Input Common Mode to GND Wide Supply Voltage... 3 V < V CC < 32 V Pin Compatible With
More informationdescription logic diagram (positive logic) logic symbol
SDAS074B APRIL 1982 REVISED JANUARY 1995 AS1004A Offer High Capacitive-Drive Capability Driver Version of ALS04B and AS04 Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers
More informationAVAILABLE OPTIONS PACKAGE VIOmax SMALL OUTLINE. PLASTIC DIP at 25 C (D) (P) 0 C to 70 C 5 mv LM306D LM306P
SLCS8A OCTOBER 979 REVISED OCTOBER 99 Fast Response Times Improved Gain and Accuracy Fanout to Series 5/7 TTL Loads Strobe Capability Short-Circuit and Surge Protection Designed to Be Interchangeable With
More informationTPIC6259 POWER LOGIC 8-BIT ADDRESSABLE LATCH
POWER OIC 8-BIT ARESSABE ATC ow r S(on).... Ω Typical Avalanche Energy...75 mj Eight Power MOS Transistor Outputs of 5-mA Continuous Current.5-A Pulsed Current Per Output Output Clamp Voltage at Four istinct
More informationSN55451B, SN55452B, SN55453B, SN55454B SN75451B, SN75452B, SN75453B, SN75454B DUAL PERIPHERAL DRIVERS
PERIPHERAL DRIVERS FOR HIGH-CURRENT SWITCHING AT VERY HIGH SPEEDS Characterized for Use to 00 ma High-Voltage Outputs No Output Latch-Up at 0 V (After Conducting 00 ma) High-Speed Switching Circuit Flexibility
More informationCD54/74AC283, CD54/74ACT283
Data sheet acquired from Harris Semiconductor SCHS251D August 1998 - Revised May 2000 Features Buffered Inputs Exceeds 2kV ESD Protection MIL-STD-883, Method 3015 SCR-Latchup-Resistant CMOS Process and
More informationSN75150 DUAL LINE DRIVER
Meets or Exceeds the Requirement of ANSI EIA/TIA-232-E and ITU Recommendation V.28 Withstands Sustained Output Short Circuit to Any Low-Impedance Voltage Between 25 V and 25 V 2-µs Max Transition Time
More informationdescription/ordering information
Wide Operating Voltage Range of 2 V to 6 V Outputs Can Drive Up To 10 LSTTL Loads Low Power Consumption, 80-µA Max I CC Typical t pd = 16 ns ±4-mA Output Drive at 5 V Low Input Current of 1 µa Max Encode
More informationSN55182, SN75182 DUAL DIFFERENTIAL LINE RECEIVERS
SN55182, SN75182 DUAL DIFFERENTIAL LINE RECEIVERS Single 5-V Supply Differential Line Operation Dual Channels TTL Compatibility ±15-V Common-Mode Input Voltage Range ±15-V Differential Input Voltage Range
More informationTLC548C, TLC548I, TLC549C, TLC549I 8-BIT ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL CONTROL
Microprocessor Peripheral or Standalone Operation 8-Bit Resolution A/D Converter Differential Reference Input Voltages Conversion Time...17 µs Max Total Access and Conversion Cycles Per Second TLC548...up
More information74ACT11244 OCTAL BUFFER/LINE DRIVER WITH 3-STATE OUTPUTS
3-State Outputs Drive Bus Lines or Buffer Memory Address Registers Inputs Are TTL-Voltage Compatible Flow-Through Architecture Optimizes PCB Layout Center-Pin V CC and GND Configurations to Minimize High-Speed
More informationSN55113, SN75113 DUAL DIFFERENTIAL LINE DRIVERS
SN, SN7 Choice of Open-Collector, Open-Emitter, or -State s High-Impedance State for Party-Line Applications Single-Ended or Differential AND/NAND s Single -V Supply Dual Channel Operation Compatible With
More informationSN54HC165, SN74HC165 8-BIT PARALLEL-LOAD SHIFT REGISTERS
N5465, N465 8-BIT PAAE-OAD IFT EGITE 16C DECEMBE 1982 EVIED MAY 199 Complementary Outputs Direct Overriding oad (Data) Inputs Gated Clock Inputs Parallel-to-erial Data Conversion Package Options Include
More informationdescription/ordering information
Qualified for Automotive Applications Operates With 3-V to 5.5-V V CC Supply Operates Up To 1 Mbit/s Low Standby Current...1 µa Typical External Capacitors...4 0.1 µf Accepts 5-V Logic Input With 3.3-V
More informationSingle 3-Input Positive-XOR Gate Check for Samples: SN74LVC1G386
1 SN74LVC1G386 SCES439E APRIL 2003 REVISED DECEMBER 2013 Single 3-Input Positive-XOR Gate Check for Samples: SN74LVC1G386 1FEATURES DESCRIPTION 2 Available in the Texas Instruments The SN74LVC1G386 device
More informationL293D QUADRUPLE HALF-H DRIVER
00-m Current Capability Per Driver Pulsed Current.- Per Driver Clamp Diodes for Inductive Transient Suppression Wide Supply Voltage Range 4.5 V to V Separate -ogic Supply Thermal Shutdown Internal ESD
More informationdescription/ordering information
SLVS053D FEBRUARY 1988 REVISED NOVEMBER 2003 Complete PWM Power-Control Function Totem-Pole Outputs for 200-mA Sink or Source Current Output Control Selects Parallel or Push-Pull Operation Internal Circuitry
More informationCD74HC4051-Q1 ANALOG MULTIPLEXER/DEMULTIPLEXER
CD74HC4051-Q1 ANALOG MULTIPLEXER/DEMULTIPLEXER Qualified for Automotive Applications Wide Analog Input Voltage Range of ±5 V Max Low ON Resistance 70 Ω Typical (V CC V EE = 4.5 V) 40 Ω Typical (V CC V
More informationSN54CBT16244, SN74CBT BIT FET BUS SWITCHES
SN54CBT16244, SN74CBT16244 16-BIT FET BUS SWITCHES SCDS031I MAY 1996 REVISED OCTOBER 2000 Members of Texas Instruments Widebus Family Standard 16244-Type Pinout 5-Ω Switch Connection Between Two Ports
More informationSN54ALS138A, SN54AS138, SN74ALS138A, SN74AS138 3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS
SN54ALS138A, SN54AS138, SN74ALS138A, SN74AS138 3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS Designed Specifically for High-Speed Memory Decoders and Data Transmission Systems Incorporate Three Enable Inputs
More informationMC3487 QUADRUPLE DIFFERENTIAL LINE DRIVER
Meets or Exceeds Requirements of ANSI EIA/TIA-422-B and ITU Recommendation V. -State, TTL-Compatible s Fast Transition Times High-Impedance Inputs Single -V Supply Power-Up and Power-Down Protection Designed
More informationdescription/ordering information
SCAS528D AUGUST 1995 REVISED OCTOBER 2003 2-V to 6-V V CC Operation Inputs Accept Voltages to 6 V Max t pd of 7.5 ns at 5 V SN54AC32...J OR W PACKAGE SN74AC32... D, DB, N, NS, OR PW PACKAGE (TOP VIEW)
More informationSN75176A DIFFERENTIAL BUS TRANSCEIVER
SN7576A Bidirectional Transceiver Meets or Exceeds the Requirements of ANSI Standards EIA/TIA-4-B and ITU Recommendation V. Designed for Multipoint Transmission on Long Bus Lines in Noisy Environments
More informationSN54ALS1035, SN74ALS1035 HEX NONINVERTING BUFFERS WITH OPEN-COLLECTOR OUTPUTS
Noninverting Buffers With Open-Collector Outputs description These devices contain six independent noninverting buffers. They perform the Boolean function Y = A. The open-collector outputs require pullup
More informationSN54AHCT132, SN74AHCT132 QUADRUPLE POSITIVE-NAND GATES WITH SCHMITT-TRIGGER INPUTS
Inputs Are TTL-Voltage Compatible Operation From Very Slow Input Transitions Temperature-Compensated Threshold Levels High Noise Immunity Same Pinouts as AHCT00 Latch-Up Performance Exceeds 250 ma Per
More informationSN54ACT00, SN74ACT00 QUADRUPLE 2-INPUT POSITIVE-NAND GATES
SCAS AUGUST 99 REVISED MAY 99 Inputs Are TTL-Voltage Compatible EPIC (Enhanced-Performance Implanted CMOS) -µm Process Package Options Include Plastic Small-Outline (D), Shrink Small-Outline (DB), Thin
More informationSN5407, SN5417, SN7407, SN7417 HEX BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS
Converts TTL Voltage Levels to MOS Levels High Sink-Current Capability Clamping Diodes Simplify System Design Open-Collector Driver for Indicator Lamps and Relays s Fully Compatible With Most TTL Circuits
More informationdescription/ordering information
3-Terminal Regulators Output Current Up To 100 ma No External Components Required Internal Thermal-Overload Protection Internal Short-Circuit Current Limiting Direct Replacement for Industry-Standard MC79L00
More informationSN5407, SN5417, SN7407, SN7417 HEX BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS SDLS032A DECEMBER 1983 REVISED NOVEMBER 1997
Converts TTL Voltage Levels to MOS Levels High Sink-Current Capability Clamping Diodes Simplify System Design Open-Collector Driver for Indicator Lamps and Relays s Fully Compatible With Most TTL Circuits
More informationTPS TPS3803G15 TPS3805H33 VOLTAGE DETECTOR APPLICATIONS FEATURES DESCRIPTION
VOLTAGE DETECTOR TPS8 1 TPS8G15 TPS85H SLVS92A JULY 21 REVISED JUNE 27 FEATURES Single Voltage Detector (TPS8): Adjustable/1.5 V Dual Voltage Detector (TPS85): Adjustable/. V High ±1.5% Threshold Voltage
More informationSN54ALS05A, SN74ALS05A HEX INVERTERS WITH OPEN-COLLECTOR OUTPUTS
SN54ALS05A, SN74ALS05A HEX INVERTERS WITH OPEN-COLLECTOR OUTPUTS SDAS190A APRIL 1982 REVISED DECEMBER 1994 Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard
More informationHIGH-VOLTAGE HIGH-CURRENT DARLINGTON TRANSISTOR ARRAYS
SLRS3D DECEMBER 976 REVISED NOVEMBER 4 HIGH-VOLTAGE HIGH-CURRENT DARLINGTON TRANSISTOR ARRAYS 5-mA Rated Collector Current (Single Output) High-Voltage Outputs... V Output Clamp Diodes Inputs Compatible
More informationSN74CB3T3253 DUAL 1-OF-4 FET MULTIPLEXER/DEMULTIPLEXER 2.5-V/3.3-V LOW-VOLTAGE BUS SWITCH WITH 5-V TOLERANT LEVEL SHIFTER
SN74CB3T3253 DUAL 1-OF-4 FET MULTIPLEXER/DEMULTIPLEXER 2.5-V/3.3-V LOW-VOLTAGE BUS SWITCH WITH 5-V TOLERANT LEVEL SHIFTER FEATURES Low Power Consumption (I CC = 20 µa Max) Output Voltage Translation Tracks
More informationSN54AC04, SN74AC04 HEX INVERTERS
SN54AC04, SN74AC04 HEX INVERTERS 2-V to 6-V V CC Operation Inputs Accept Voltages to 6 V Max t pd of 7 ns at 5 V SN54AC04...J OR W PACKAGE SN74AC04...D, DB, N, NS, OR PW PACKAGE (TOP VIEW) 1A 1Y 2A 2Y
More informationSN74LV04A-Q1 HEX INVERTER
SN74LV04A-Q1 HEX INVERTER Qualified for Automotive Applications ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pf, R = 0) 2-V to 5.5-V Operation
More informationAM26C31-EP QUADRUPLE DIFFERENTIAL LINE DRIVER
1 1FEATURES Controlled Baseline One Assembly One Test Site One Fabrication Site Extended Temperature Performance of 55 C to 125 C Enhanced Diminishing Manufacturing Sources (DMS) Support Enhanced Product-Change
More informationMC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS
MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS101C FEBRUARY 1979 REVISED FEBRUARY 2002 Wide Range of Supply Voltages, Single Supply...3 V to 36 V or Dual Supplies Class AB Output Stage
More informationORDERING INFORMATION ORDERABLE PART NUMBER SN74CBTS3306PWR
5-Ω Switch Connection Between Two Ports TTL-Compatible Input Levels description/ordering information The SN74CBTS3306 features independent line switches with Schottky diodes on the I/Os to clamp undershoot.
More informationAM26LS31 QUADRUPLE DIFFERENTIAL LINE DRIVER
AM6LS SLLSG JANUARY 979 REVISED FEBRUARY Meets or Exceeds the Requirements of ANSI TIA/EIA--B and ITU Recommendation V. Operates From a Single -V Supply TTL Compatible Complementary Outputs High Output
More informationCD54HC139, CD74HC139, CD54HCT139, CD74HCT139
Data sheet acquired from Harris Semiconductor SCHS148D September 1997 - Revised October 2003 CD54HC139, CD74HC139, CD54HCT139, CD74HCT139 High-Speed CMOS Logic Dual 2- to 4-Line Decoder/Demultiplexer [
More information2 C Accurate Digital Temperature Sensor with SPI Interface
TMP125 2 C Accurate Digital Temperature Sensor with SPI Interface FEATURES DIGITAL OUTPUT: SPI-Compatible Interface RELUTION: 10-Bit, 0.25 C ACCURACY: ±2.0 C (max) from 25 C to +85 C ±2.5 C (max) from
More informationCD74HC4017-Q1 HIGH-SPEED CMOS LOGIC DECADE COUNTER/DIVIDER WITH 10 DECODED OUTPUTS
Qualified for Automotive Applications Fully Static Operation Buffered Inputs Common Reset Positive Edge Clocking Typical f MAX = 60 MHz at = 5 V, = 5 pf, T A = 25 C Fanout (Over Temperature Range) Standard
More informationMC3486 QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUTS
Meets or Exceeds the Requirements of ANSI Standards EIA/TIA-422-B and EIA/TIA-423-B and ITU Recommendations V.10 and V.11 3-State, TTL-Compatible s Fast Transition Times Operates From Single 5-V Supply
More informationdescription block diagram
Fast Transient Response 10-mA to 3-A Load Current Short Circuit Protection Maximum Dropout of 450-mV at 3-A Load Current Separate Bias and VIN Pins Available in Adjustable or Fixed-Output Voltages 5-Pin
More informationTIB82S105BC FIELD-PROGRAMMABLE LOGIC SEQUENCER WITH 3-STATE OUTPUTS OR PRESET
50-MHz Clock Rate Power-On Preset of All Flip-Flops -Bit Internal State Register With -Bit Output Register Power Dissipation... 00 mw Typical Programmable Asynchronous Preset or Output Control Functionally
More informationdescription/ordering information
5-Ω Switch Connection Between Two Ports TTL-Compatible Input Levels SN54CBTD3384...JT OR W PACKAGE SN74CBTD3384... DB, DBQ, DGV, DW, OR PW PACKAGE (TOP VIEW) 1OE 1B1 1A1 1A2 1B2 1B3 1A3 1A4 1B4 1B5 1A5
More informationCD54HC4049, CD74HC4049, CD54HC4050, CD74HC4050
CD54HC4049, CD74HC4049, CD54HC4050, CD74HC4050 Data sheet acquired from Harris Semiconductor SCHS205I February 1998 - Revised February 2005 High-Speed CMOS Logic Hex Buffers, Inverting and Non-Inverting
More informationdescription/ordering information
Controlled Baseline One Assembly/Test Site, One Fabrication Site Extended Temperature Performance of 40 C to 25 C Enhanced Diminishing Manufacturing Sources (DMS) Support Enhanced Product-Change Notification
More information