Magnetic sensor MSK320 Incremental, digital interface, resolution 12.5 μm, scaling factor 64 1

Transcription

1 Incremental, digital interface, resolution 12.5 μm, scaling factor 64 1 Profile Max. resolution 12.5 μm max. resolution with MR320 or MR320 (250 poles) Repeat accuracy ±0.04 mm Repeat accuracy of ±1 increment Works with M320/1 magnetic tape, MRI01 or MR320 magnetic ring, MR320 magnetic tape ring Reading distance 2 mm Max pulses/revolution in combination with MR320 or MR320 (250 poles) Optionally with reference point R or flexible reference marks FR travel direction signal before design type of connection type of connection 6X (6,8core) (4core) ~61 type of connection 8X design ZM elongated hole (3x): (enlarged illustration) 3.3 9pin SU 9.5 active measurement area (6,8core) (4core) ~31 active measurement area M8x0.5 design F travel direction signal before arrow 3.5 SW11 5 MagLine 5.2 MagLine asic

2 Incremental, digital interface, resolution 12.5 μm, scaling factor 64 2 Mechanical data Feature Technical data dditional information Housing red plastic design steel F design zinc diecast ZM design Sensor/band reading distance mm O, I reference signals mm R reference signal mm FR reference signal Sensor/ring reading distance mm O, I reference signals mm R reference signal able sheath PUR suitable for dragchain use 4wire ø mm; 5, 6, 8wire ø5 0.4 mm able bending radius 5x cable diameter static 7.5x cable diameter dynamic Service life of cable >5 million cycles under the following test conditions: travel range 4.5 m travel speed 3 m/s acceleration 5 m/s 2 ambient temperature 20 ±5 lectrical data Feature Technical data dditional information Operating voltage 24 V ±20 % reverse polarity protected 5 V ±5 % no reverse polarity protection urrent consumption <20 m at 24 V, unloaded <75 m loaded Output circuit PP, L (RS422), TTL PP only at 24 V Output signals, /,, /, I, /I, R, /R, FR, /FR quadrature signal Output signal level high >U 2.5 V PP >2.5 V L >2.4 V TTL Output signal level low <0.8 V PP <0.5 V L <0.4 V TTL Jitter <15 % 0.5 mm reading distance Pulse width of reference signal 1 increment(s) Realtime requirement speedproportional signal output Type of connection open cable end plug connector 7/8pole Sub 9pole Signal pattern / The logical condition of signals and is not defined in reference to the index signal I or the reference signal R. It can deviate from the signal form. / I, R /I, /R I, R 90 1 increments System data Feature Technical data dditional information Resolution 0.04, 0.05, 0.08, 0.1, 0.16, 0.2, 0.8 mm Scaling factor 1, 4, 5, 8, 10, 16, 20, 64 System accuracy ±( x L) mm, L in m at T U = 20 ±0.1 at T U = 20 Repeat accuracy ±1 increment(s) Measuring range ircumferential speed 25 m/s 3.2 m/s referencing speed Travel speed 25 m/s 3.2 m/s referencing speed 5 MagLine 5.2 MagLine asic

3 Incremental, digital interface, resolution 12.5 μm, scaling factor 64 3 mbient conditions Feature Technical data dditional information mbient temperature Storage temperature Relative humidity 100 % condensation admissible M N interference resistance / immission N emitted interference / emission Protection category IP67 N Shock resistance 500 m/s 2, 11 ms N Vibration resistance 100 m/s 2, Hz N Pin assignment Not inverted without reference signal Signal 1 6X 8X GN black 1 1 +U brown 2 2 red 3 3 orange 4 4 nc 5 5 nc 6 6 nc 7 7 nc 8 Inverted with reference signal Signal 1 6X 8X red 1 1 orange 2 2 I blue 3 3 +U brown 4 4 GN black 5 5 / yellow 6 6 / green 7 7 I/ violet 8 8 Inverted without reference signal Signal 1 6X 8X red 1 1 orange 2 2 nc 3 3 +U brown 4 4 GN black 5 5 / yellow 6 6 / green 7 7 nc 8 5 MagLine 5.2 MagLine asic

4 Incremental, digital interface, resolution 12.5 μm, scaling factor 64 4 Hint for mounting For systems with reference points on the magnetic tape please take care that sensor and strip are correctly aligned (see picture). Reference signal O, I R FR, Sensor/tape 2 mm 1.5 mm mm reading distance, Lateral offset ±2 mm ±0.5 mm ±0.5 mm, lignment error ±3 ±3 ±3, Longitudinal ±1 ±1 ±1 inclination, Lateral inclination ±3 ±3 ±3 symbolic sensor representation symbolic sensor representation 5 MagLine 5.2 MagLine asic

5 Incremental, digital interface, resolution 12.5 μm, scaling factor 64 5 Order Ordering information One or more system components are required: Magnetic band M320/1 Magnetic ring MR320 Magnetic band ring MR320 Magnetic ring MRI Ordering table Feature Ordering data Specification dditional information Operating voltage 4 24 V ±20 % reverse polarity protected 5 5 V ±5 % esign rectangular ZM metal housing without status Ls not for operating voltage 4 and output circuit L F round only with NI output signal, O reference signal and scaling factor 8 Type of connection 1 open cable end 6X bullet connector without mating connector 8X SU 9pole without mating connector extension cables on request able length L m, in steps of 1 m others on request Output circuit PP pushpull only operating voltage 4 L Lineriver TTL only with noninverted output signal, 5 m cable length F Output signal NI not inverted I inverted only with or ZM design and I or R reference signal G Reference signal O without I periodic index only with or ZM design, index signal every 3.2 mm R fixed reference only with or ZM design, not with scaling factor 1 FR flexible reference only for ZM design and M320/1 magnetic tape Linear resolution/ radial scaling factor Order key H /64, 0.04/20, 0.05/16, 0.08/10, 0.1/8, 0.16/5, 0.2/4, 0.8/1 others on request MSK320 F G H Scope of delivery: MSK320, Mounting instructions, Fastening set ccessories: Installation aid Z Flexible reference mark Order key subject to technical alteration 2018/02/20 16:45 5 MagLine 5.2 MagLine asic