Rotary encoders. absolute / optical. Bright ideas in the measurement of rotation: robust, precise, versatile.
|
|
|
- Diana Anthony
- 5 years ago
- Views:
Transcription
1 Rotary encoders absolute / optical right ideas in the measurement of rotation: robust, precise, versatile.
2 Absolute encoder WK02/1 Hollow shaft WK02/1 - robust single-turn angle encoder with through hollow shaft and 1 bit (8192 steps) resolution per revolution. Sens of rotaion Design-dependent: address-setting, reset, status-ld ø40 ±0.1 ±0.1 M5x10 deep H7 ø45 ø20 19 max. 86 ø92.5 ø ø40f7 ca. 68 OUT 6 Z8 N ø40 Shaft H2 Clamping ring 91± Form A Metal pin ø6 h Features: 10 ø up to 8192 steps/revolution parallel PP (push pull), serial RS485 interfaces SS interface, nter-s with K NCOM profile Profibus, class 1 encoder profile ray or binary output code programmable, easy installation thanks to hollow shaft 20 SW18 Connecion type 1 Form F Spring buckle Form Plastic shield for compensation of manufacturing tolerances ø Assembled 112 SW0 ø US-OUT Connecion type 6 US-N
3 Technical alteration reserved 04/2002 Feature Order text Technical data Additional information nterface/protocol P1 parallel PP, short-circuit proof, max. 20 bit e.g. 12 bit single-/8 bit multi-turn S6/04 A RS422/SS 100 khz 1 MHz clock speed, dependent on cable length nterbus-s with NCOM profile K P Pofibus class 1 encoder profile Connection type 1 parallel SS 6 parallel nter-s, Profibus C [m] from 0. to 10.0 in 0.1 steps OK without cable D Steps/revolution 8192 max. 1 bit 4096, 2048, 1024, 512, 60, 256, 720 Output code binary code ray code Sense of rotation (ascending) counter-clockwise clockwise F Type of protection 54 P54 according to DN VD P65 according to DN VD 0470 H Torque support A A type type F spring buckle O without torque support Shaft diameter [mm] 16 hollow shaft hollow shaft 20 Mechanical data Shaft load max. 120 N radial, 400 N axial Operating speed max. 000 (P54) max (P65) Shaft inertia moment 1 x 10-4 kgm 2 Angular acceleration 2 x 10 5 rad/s 2 Starting torque approx. 5 Ncm (P54) at 20 C approx. 15 Ncm (P65) at 20 C Weight approx. 1.2 kg Temperature range working temperature 0 C +50 C storage temperature -20 C +85 C Air humidity condensation not permissible Shaft burnished steel 2-fold ball-bearing Service life of bearing min. 400 x 10 6 revolutions 10 9 at 20 N shaft load Shock resistance 0 g (1 ms) according to DN-C Vibration resistance [g] 10 (5 150 Hz), 20 ( Hz) according to DN C lectrical data SS Parallel nterbus-s Profibus Operating voltage 24 V DC ±20% 24 V DC ±20% Output driver RS 485 push-pull Power consumption < 1. W < 1.5 W <.5 W <.0 W Permitted load/channel (max.) 1 MHz ± 0 ma SS clock speed min./max. 100 khz/500 khz it change rate 00 khz Signal level high typ..8 V U V (0 ma) Signal level low typ. 1. V (20 ma) < 0.7 V (0 ma) Ramp-up time t r Ramp-down time t f Short-circuit proof outputs yes, only 1 channel ** yes Polarity protection on U yes yes Other data Scanning opto-electronical Accuracy ± 1 LS Housing and flange aluminium Test mark C * without cable, ** short circuit toward OV permissible at U = 24 V DC ±20%. Your order data: WK02/1 M1 H2 A C D F H
4 Absolute encoder WK50/1 Hollow shaft WK50/1 - robust multi-turn angle encoder with through hollow shaft. Absolute 1 bit encoding (8192 steps) per revolution and 4096 revolutions. Sens of rotaion Design-dependent: address-setting, reset, status-ld ø40 ±0.1 ±0.1 M5x10 deep H7 ø45 ø20 19 max. 86 ø92.5 ø ø40f7 ca. 68 OUT 6 Z8 N ø40 Shaft H2 Clamping ring 91± Form A Metal pin ø6 h Features: 10 ø up to 8192 steps/revolution and 4096 revolutions parallel PP (push pull) interface, max. 20 bit serial RS485 interface SS interface, nter-s with K NCOM profile Profibus, class 1 encoder profile ray or binary output codes programmable, easy installation thanks to hollow shaft 20 SW18 Connecion type 1 Form F Spring buckle Form Plastic shield for compensation of manufacturing tolerances ø Assembled 112 SW0 ø US-OUT Connecion type 6 US-N
5 Technical alteration reserved 04/2002 Feature Order text Technical data Additional information nterface/protocol P1 parallel PP, short-circuit proof, max. 20 it e.g. 12 bit single-/8 bit multi-turn S6/04 A RS422/SS 100 khz 1 MHz clock speed, dependent on cable length nterbus-s with NCOM profile K P Pofibus class 1 encoder profile Connection type 1 parallel SS 6 parallel nter-s, Profibus C [m] , 12.0, 15.0 from 0.5 to 10.0 in 0.1 steps OK without cable Steps/revolution 8192 max. 1 bit 4096, 2048, 1024, 512, 256 D Number of revolutions 4096 max. 12 bit 1024, 256 Output code binary code ray code F Sense of rotation (ascending) counter-clockwise clockwise H Type of protection 54 P54 according to DN VD P65 according to DN VD 0470 Torque support A A type type F spring buckle O without K Shaft diameter [mm] 16 hollow shaft hollow shaft 20 Mechanical Data Shaft load max N radial, 400 N axial Operating speed max. 000 (P54) max (P65) Shaft moment of inertia 1 x 10-4 kgm 2 Angular acceleration 2 x 10 5 rad/s 2 Starting torque approx. 5 Ncm (P54) at 20 C approx. 15 Ncm (P65) bei 20 C Weight approx. 1.2 kg Temperature range working temperature 0 C +50 C storage temperature -20 C +85 C Air humidity condensation not permissible Shaft burnished steel 2-fold ball-bearing Service life of bearing min. 400 x 10 6 revolutions 10 9 at 20 N shaft load Shock resistance 0 g (1 ms) according to DN-C Vibration resistance [g] 10 (5 150 Hz), 20( Hz) according to DN C lectrical data SS Parallel nterbus-s Profibus Operating voltage 24 V DC ±20% 24 V DC ±20% Output driver RS 485 push-pull Power consumption < 1. W < 1.5 W <.5 W <.0 W Permitted load/channel (max.) ± 0 ma SS clock speed min./max. 100 khz/500 khz it change rate 00 khz Signal level high typ..8 V U V (0 ma) Signal level low typ. 1. V (20 ma) < 0.7 V (0 ma) Ramp-up time t r Ramp-down time t f Short-circuit proof outputs yes, only 1 channel ** yes Polarity protection on U yes yes Other data Scanning opto-electronical, magnetic Accuracy ± 1 LS Housing and flange aluminium Test mark C * 80 C for 1 type of connection, 70 C for 14-bit version, ** short circuit toward OV permissible at U = 24 V DC ±20%. Your order data: WK50/1 M1 H2 A C D F H K
6 SKO mbh Dr.-ng.. Wandres Address Weihermattenweg 2 D uchenbach Telephone (+49) / 94-0 Telefax (+49) / info@siko.de nternet Technical alteration reserved art. no /200
Technical data. General specifications. Linearity error ± 0.1 Electrical specifications Operating voltage U B
Model Number SYNCHRON SERIELLES INTERFACE Features Very small housing Up to 32 Bit multiturn SSI interface Free of wear magnetic sampling High resolution and accuracy Description The ENA36IL series are
Encoder - Absolut 2RMHF-SSI
Absolute Encoder: Ø24 mm Hollow Shaft: Ø3 mm to ¼ Inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction IP-Rating: IP64 or IP67 Mechanical
Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT
Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available
DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach
NEW DRS: Incremental encoders, number of lines and zero pulse width freely programmable DRS: s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing
Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT
Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available
Absolute encoders - SSI Shaft with clamping or synchro flange Optical multiturn encoders 14 bit ST / 12 bit MT
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Suitable for high positive,
Rotary Measuring Technology
SSI or parallel interface Highest shock resistance on the market ( 2500 m/s2, 6 ms acc. to DIN IEC 68-2-27) Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 66 Various options (e.g. LATCH,
Technical data. General specifications V DC Power consumption P 0. 1 W Time delay before availability t v
Model Number SYNCHRON SERIELLES INTERFACE Features Very small housing Up to 32 Bit multiturn SSI interface Free of wear magnetic sampling High resolution and accuracy Description The ENA36IL series are
Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 700 a at 40 C Mission Time (T M ) L 10
Model Number SYNCHRON SERIELLES INTERFACE Features Solid shaft SSI interface Up to Bit multiturn Free of wear magnetic sampling High resolution and accuracy Additionally push buttons for preset function
Rotary Measuring Technology
Our ATEX encoders now also carry approval for Dust Flameproof-enclosure type of construction with approval for Zone 1 and 21 ExII2GEExdIICT6 and ExII2DIP6xT85 C Shaft ø 12 mm One type for every situation:
ABSOLUTE ROTARY ENCODER MULTI-TURN BIT PARALLEL
Main Features - Compact and heavy-duty industrial model - Interface: Bit-parallel, push pull ΠShort circuit proof - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096
Absolute Encoders Multiturn
Absolute Encoders Multiturn Functional Safety, optical The absolute multiturn encoders Sendix 5863 SIL and 5883 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN
Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT
Features High resolution encoder multiturn / SSI Optical sensing method Resolution: singleturn 18 bit, multiturn 12 bit Electronic setting of zero point Counting direction input Available with additional
DG 60 L Incremental Encoder
Incremental Encoder Features Incremental encoder with 60 mm outer diameter ugged die-cast aluminum housing Quadrature output with reference marker, complementary output signals Protection to IP 67 Square
Absolute Encoders Singleturn
The absolute singleturn encoders Sendix 5853 SIL and 5873 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN EN ISO 6800-5- or PLe to DIN EN ISO 3849. The extra
RoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
Absolute Encoders - Singleturn
The Sendix 5853 and Sendix 5873 singleturn encoders with SSI or BiSS interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional
Incremental encoders Blind or through hollow shaft ø12 mm pulses per revolution
Blind or through hollow shaft ø mm...5 pulses per revolution Features Encoder with blind or through hollow shaft ø mm Optical sensing method Max. 5 pulses per revolution Small profile depth Versatile mounting
ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions
Phone: Fax: Web: -
ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to
XXXX e. X d.. X X X a
The Heavy Duty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
Absolute Encoders Multiturn
The Sendix F36 multiturn with the patented Intelligent Scan Technology is an optical multiturn encoder in miniature format, without gears and with 00% insensitivity to magnetic fields. With a size of just
Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 700 a at 40 C Mission Time (T M ) L 10
Model Number SYNCHRON SERIELLES INTERFACE Features Recessed hollow shaft SSI interface Up to Bit multiturn Free of wear magnetic sampling High resolution and accuracy Additionally push buttons for preset
Absolute encoders - SSI
with through hollow shaft Features Encoder multiturn / SSI Optical sensing method Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics
Technical data. General specifications. Measurement range min max. 360
Model Number Features Very small housing High climatic resistance 12 Bit singleturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling
Rotary Measurement Technology Incremental Encoders
-20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS 422) - Housing: 58 mm - Shaft: 6 or 10 mm - Hollow shaft 12 mm - Blind hollow shaft 15 mm - Max. 65,56 steps
Absolute Encoders - Singleturn
The Sendix 5 and Sendix 7 singleturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional SinCos
Standard Sendix 5000 / 5020 (shaft / hollow shaft) Push-Pull / RS422 / Open collector. Robust performance. Many variants
ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to
Magnetic absolute single-turn encoder BMSH MAGRES parallel
Magnetic absolute single-turn encoder BMSH MAGRES parallel features robust single-turn encoder up to 9 bit parallel interface miniature housing zero-point programmable general data voltage supply 5 VDC
Rotary Position Technology Incremental Encoders
-40 to 80 C Temperature Shock/vibration resistant Short-circuit protected Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
ABSOLUTE ROTARY ENCODER DEVICE NET
Main Features - Compact and heavy-duty industrial model - Certified: By ODVA - Interface: Device Net - Housing: 58 mm - Full or hollow shaft: 6 or 0 mm / 5 mm - Max. 6556 steps per revolution (6 Bit) -
Magnetic absolute multi-turn hollow shaft encoder BMMH MAGRES SSI
Magnetic absolute multi-turn hollow shaft encoder BMMH MAGRES SSI features robust multi-turn encoder up to - 2 bit single-turn resolution - 3 bit multi-turn resolution miniature housing zero point programmable
XXXX e. X d.. X X X a
The Heavy uty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
Technical data. General specifications V DC No-load supply current I 0. typ. 50 ma Power consumption P 0
Model Number SYNCHRON SERIELLES INTERFACE Cable pull rotary encoder with SSI interface Features Solid yet lightweight plastic construction Compact, slim design (the shaft of the mounted rotary encoder
Express Delivery. Axial. Connection
HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Shaft from Ø 6 to 12 mm Protection class IP67 according to DIN
ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous -serial (RS 422) - Housing: 58 mm - Shaft: 6 or 10 mm - Hollow shaft 12 mm - Blind hollow shaft 15 mm - Max. 65,56 steps
Multiturn absolute encoder
SYNCHRON SERIELLES INTERFACE Multiturn absolute encoder Model Number Features Industrial standard housing Ø58 mm 30 Bit multiturn Data transfer up to 2 MBaud Optically isolated RS 422 interface Recessed
Online data sheet DFS60A-TEPZ00S09 DFS60 INCREMENTAL ENCODERS
Online data sheet DFS60A-TEPZ00S09 DFS60 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Features Special device Specialty Ordering information Other models and accessories
Incremental encoders 6
Incremental encoders ELECTRONIC GmbH Incremental encoders 6 6.1 Explanatory notes...6-3 6.2 Functional description...6-4 6.3 Applications...6-5 6.4 Assembly examples...6-6 6.5 Alternative designs...6-8
Multiturn absolute encoder
SYNCHRON SERIELLES INTERFACE Multiturn absolute encoder Release date: 2016-07-12 16:14 Date of issue: 2016-07-12 t4917_eng.xml Model Number Features Industrial standard housing Ø58 mm 0 Bit multiturn Data
Rotary Measurement Technology Absolute Encoders, Multiturn
Mechanical drive Safety-LockTM High rotational speed -40 to 90 C IP Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
ABSOLUTE ROTARY ENCODER SSI PROGRAMMABLE
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions
Incremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution
Features Robust, compact housing Two bearings with large distance, one at each end High shaft load up to 450 N Shock resistant up to 250 g Shaft insulation up to 2.8 kv Highest operating speed 10000 rpm
IXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6.
IXARC Incremental Encoder UCD-IPT00-08192-M100-PRD Interface Interface Programmable Incremental Programming Functions PPR (1-16384), Output, Counting Direction Configuration Tool UBIFAST Configuration
Incremental Encoder Model: FOI58
Incremental Encoder Model: FI58 Document no. FI 188 BE Date: 1.01.201 Robust mechanical construction, high vibration and shock resistance 1 to 16,8 pulses/ revolution perating temperature - 0 C to + 85
Online data sheet DFS60B-S4PA00S74 DFS60 INCREMENTAL ENCODERS
Online data sheet DFS60B-S4PA00S74 DFS60 A B C D E F Illustration may differ Ordering information Type Part no. DFS60B-S4PA00S74 1081183 Other models and accessories www.sick.com/dfs60 H I J K L M N O
Product Information. ERN 1085 Incremental Rotary Encoder with Z1 Track
Product Information ERN 1085 Incremental Rotary Encoder with Z1 Track 02/2018 ERN 1085 Rotary encoder with mounted stator coupling Compact dimensions Blind hollow shaft 6 mm Z1 track for sine commutation
Magnetic absolute rotary encoder GEL 235 Singleturn, Multiturn up to 28 bits (SSI)
Magnetic absolute rotary encoder GEL 25 Singleturn, Multiturn up to 28 bits (SSI) Technical information version 09.06 Unique Nonius-evaluation Measuring principle: magnetic, high resolution Evaluation:
Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85
![Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85](/thumbs/80/82459193.jpg "Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85")
Parallel Singleturn bsolute Value Encoder Features 13-bit Singleturn High code change frequency Inputs for: - Selection of counting direction - Buffer memory (LTCH) - Multiplex operation (TRISTTE) Short-circuit
Incremental hollow shaft encoder BRIH EcoMag
Incremental hollow shaft encoder BRIH EcoMag features miniaturized hollow shaft encoder with wide pulse range radial cable connection or connector end shaft mounting up to mm general data voltage supply
RotoLine Rotary Encoders. Magnetic rotary encoders Optical rotary encoders Geared potentiometers. Platzhalter Titel. Siehe Umschlagdatei RotoLine
03 2009 1 RotoLine Rotary Encoders 2 Magnetic rotary encoders Optical rotary encoders Geared potentiometers Platzhalter Titel Siehe Umschlagdatei RotoLine 2 SIKO Precision in Motion Success is the result
Incremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size ø58 mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536,
Incremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536, programmable
Incremental Encoder for special applications
Model Number Features Up to 50,000 ppr Extended temperature range Industrial standard housing Ø58 mm Servo or clamping flange 10 V... 30 V with short-circuit proof push-pull output Description High performance
Heavy Duty Push-pull / RS422 / speed switch. RoHS 2/22. Magnetic field proof. XXXX e
Sendix H00 (shaft) The Sendix encoder H00 is an extremely rugged available in 3 versions: encoder with or without speed switch and double encoder. Thanks to the special HD-Safety-Lock construction it is
FVS58 singleturn absolute encoder. FVS58. Technical Product description data Incremental encoders special designs. Technical data
absolute encoder Industrial standard housing Ø58 mm 1 Bit singleturn Output code: Gray and binary Short-circuit proof push-pull output Inputs for selection of counting direction, LATCH and PRESET Code
Features & Benefits 360, 512, 720, 1000, 1024, 1440, 1800, 2000, 2048, 2880, 3000, 3600, 4000, 4096, 5000, 5120, 6000, 7200, 8000, 8192, 9000, 10000
CP-800/900 Series Size-25 Housed Rotary Optical Encoders Solid or hollow shaft, incremental, sine/cosine, or absolute format Allied Motion s CP800/900 series are size-25 (2.5 in. (63.5mm)) rotary optical
Product Information. EQN 1337 F Absolute Rotary Encoder with Tapered Shaft for Fanuc Controls with i Interface
Product Information EQN 1337 F Absolute Rotary Encoder with Tapered Shaft for Fanuc Controls with i Interface 11/2017 EQN 1337 F Rotary encoders for absolute position values Installation diameter 65 mm
Product Information. RCN 2000 RCN 5000 RCN 8000 Absolute Angle Encoders for Safety-Related Applications
Product Information RCN 2000 RCN 5000 RCN 8000 Absolute Angle Encoders for Safety-Related Applications September 2013 RCN 2000 series Absolute angle encoders for safety-related applications Safe absolute
Multiturn absolute encoder
0102 Model Number SYNCHRON SERIELLES INTERFACE Features Up to 30 Bit multiturn ATEX approval IECEx approval Flameproof enclosure Removable connection cap Galvanically isolated RS 22 interface Description
Incremental encoders Blind hollow shaft or cone shaft pulses per revolution
Features TTL output driver for cable length up to 550 m Very high resistance to shock and vibrations Hybrid bearing for extended service life Shaft insulation up to.8 kv Large terminal box, turn by 80
Technical data. Functional safety related parameters MTTF d Mission Time (T M ) max. 140 ma Power consumption P 0. Voltage drop
Release date: 2014-04-14 15: Date of issue: 2016-05-0 t102_eng.xml Model Number Features Industrial standard housing Ø58 mm 1 Bit singleturn Output code: gray and binary Short-circuit proof push-pull output
DGS 60, DGS 65 and DGS 66: Incremental Encoders for rough environmental conditions
, 5 and : s for rough environmental conditions elect your individual encoder - Possible product variants: and mm solid shafts with servo flange or face mount flange, through or blind hollow shafts with
Measuring systems. 7/2 Overview. 7/3 Built-on optoelectronic rotary encoders 7/3 Introduction
Siemens AG 2010 Measuring systems /2 Overview /3 Built-on optoelectronic rotary encoders /3 Introduction /4 Incremental encoders /4 sin/cos 1 V pp /4 RS 422 (TTL) /4 HTL /4 RS 422 (TTL) double-track /
Series BC 58. Absolute Rotary Encoder Series BC 58
Mechanical specifications Shaft diameter Shaft load 6 mm (synchro flange) 10 mm (clamping flange) 10/12 mm (blind hollow shaft) Series BC 58 E Absolute single- and multiturn rotary-encoder with solid shaft
ABSOLUTE ROTARY ENCODER DEVICE NET
Main Features - Compact and heavy-duty industrial model - Interface: CAN according to Device Net - Housing: 8 mm - Shaft: 6 or 0 mm - Resolution: Max. 2 Bit =,,2 steps over,096 revolutions - Code: Binary
Absolute multi-turn hollow shaft encoder BOMH Dignalizer SSI
features high resolution multi-turn encoder up to - 8 bit single-turn - 8 bit multi-turn interface programmable permanent self-test reference point programmable general data voltage supply 5 VDC (05C)
LENORD. +BAUER... automates motion. GEL 2351 with current or voltage interface. Technical information Version General. Features.
GEL 2351 with current or voltage interface LENORD +BAUER... automates motion. Technical information Version 201-11 General Single turn absolute rotary encoder with a resolution of 16 bits Magneto-resistive
ABSOLUTE ROTARY ENCODER CAN-BUS
Main Features - Compact and heavy-duty industrial model - Interface: CAN according to CAL - Housing: 8 mm - Shaft: 6 or 0 mm - Resolution: Max. 2 Bit =,,2 steps over,096 revolutions - Code: Binary - EMC:
ENCODER. SSI Multiturn. Series , Key-Features: Content:
ENCOER SSI Multiturn Series 8.5863, 8.5883 Content: Order Code Shaft... Order Code Hollow Shaft...3 Order Code Blind Hollow Shaft...3 Connection...4 Technical rawing...5 Technical ata...8 Key-Features:
Online data sheet AFS60E-S1AA AFS/AFM60 SSI ABSOLUTE ENCODERS
Online data sheet FS0E-S0009 FS/FM0 SSI SOLUTE ENCODERS FS0E-S0009 FS/FM0 SSI SOLUTE ENCODERS C D E F Ordering information Type Part no. FS0E-S0009 0 Other models and accessories www.sick.com/fs_fm0_ssi
Material: Weight: Shaft Loads:
Absolute Encoder Type SCA36NA-SSI Absolute Encoder - Ø 36 mm Shaft - Ø 6 mm Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction Enclosure Rating
DATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER SSI
Robust rotary sensor based on reliable magnetic technology. Stainless steel housing capable to withstand extreme environmental conditions. Ideal suited for outdoor applications. Sturdy ball bearings for
Online data sheet AFS60B-S4PA AFS/AFM60 SSI ABSOLUTE ENCODERS
Online data sheet FS60-S4P032768 FS/FM60 SSI FS60-S4P032768 FS/FM60 SSI C D E F Ordering information Type Part no. FS60-S4P032768 1037483 Other models and accessories www.sick.com/fs_fm60_ssi Illustration
Absolute encoders - analog Blind hollow shaft ø12 mm Magnetic single- or multiturn encoders 12 bit ST / 16 bit MT
Blind hollow shaft ø mm Magnetic single- or multiturn encoders bit ST / bit MT BMSH 8, BMMH 8 analog - MAGRES Features Encoder single- or multiturn / analog Magnetic sensing Resolution: singleturn bit,
Absolute encoders multiturn
The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature format, without gear and without battery. With a size of just 6 x 5 mm it offers a blind hollow shaft of
Product Overview. Rotary Encoders with Optimized Scanning
Product Overview Rotary Encoders with Optimized Scanning November 2006 Rotary encoders for electrical drives are subject to high requirements: they are expected to function reliably and provide dependable
Encoders. Series 21 Hollow-Shaft Rotary Optical Encoders Digital incremental or sine/cosine and absolute format. Features & Benefits.
Digital incremental or sine/cosine and absolute format Allied Motion s Series 21 are cost effective, hollow shaft optical encoders that are easy to mount and provide high data rate capabilities. These
Online data sheet AFS60A-BJPA AFS/AFM60 SSI ABSOLUTE ENCODERS
Online data sheet FS0-JP FS/FM0 SSI FS0-JP FS/FM0 SSI C D E F H I J K L M N O P Q R S T Ordering information Type Part no. FS0-JP 09 Other models and accessories www.sick.com/fs_fm0_ssi Illustration may
Rotary Position Technology
Magnetic Rings LM-2 / RMT-2 High rotational speed IP High IP Shock/vibration resistant Reverse polarity protection Robust Increased ability to withstand vibrations and rough installation: Eliminates machine
DS-70. Absolute position, rotary Electric Encoder
DS-70 Data Sheet, V 2.0,Nov. 2012 DS-70 Absolute position, rotary Electric Encoder The DS-70 is a member of the DS series of Electric Encoders, based on Netzer Precision proprietary technology. These encoders
ECN/EQN/ERN 400 Series
ECN/EQN/ERN 400 Series Rotary encoders with mounted stator coupling Blind hollow shaft or hollow through shaft Blind hollow shaft Hollow through shaft Connector coding A = axial, R = radial Flange socket
Absolute Rotary Encoder EXAG Explosion Proof. Canopen
Main Features - Approval: II 2 G/D EEx d II C T6 - Heavy-duty industrial model - Interface: CAN - Protocol: - Max. 65536 steps per revolution (16 Bit) - Max. 16384 revolutions (14 Bit) - Code: Binary Programmable
MODEL S15 Incremental Optical Rotary Encoder
MODEL S15 Incremental Optical Rotary Encoder Up to 200 KHz frequency response all channels Small compact size: 1.51 diameter 1.00 dia. Bolt circle mount Resolutions up to 12,500 cycles / revolution ( 50,000
Oil & Gas / Heavy Industry Type 2REX-A-NA-SSI
Oil & Gas / Heavy Industry Type 2REX-A-NA-SSI EN 60079 Electrical Specifications Encoder Type: Singleturn Resolution: Number of Revolutions: Supply Voltage: Typical Current Consumption: Accuracy: ± 0,35ᴼ
Online data sheet. ACM60B-S1KE13x06 ACM60 ABSOLUTE ENCODERS
Online data sheet ACM60B-S1KE1x06 ACM60 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Performance Number of steps per revolution Number of revolutions Ordering information
Online data sheet AFS60E-S4AC AFS/AFM60 SSI ABSOLUTE ENCODERS
Online data sheet FS60E-S4000256 FS/FM60 SSI FS60E-S4000256 FS/FM60 SSI D E F Ordering information Type Part no. FS60E-S4000256 1052119 Other models and accessories www.sick.com/fs_fm60_ssi Illustration
LENORD. +BAUER... automates motion. GEL 2037 with heavy duty flange or tooth wheel adapter. Technical information Version General.
GEL 2037 with heavy duty flange or tooth wheel adapter LENORD +BAUER... automates motion. Technical information Version 2014-07 General Multiturn absolute rotary encoders with a resolution of up to 25
Online data sheet. DFS60S-S1OC01024 DFS60S Pro SAFETY ENCODERS
Online data sheet DFS60S-S1O01024 DFS60S Pro D E F Illustration may differ Ordering information Type Part no. DFS60S-S1O01024 1069517 Other models and accessories www.sick.com/dfs60s_pro H I J K L M N
Online data sheet ACM36-L1K0-K01 ACS/ACM36 ABSOLUTE ENCODERS
Online data sheet ACM36-L1K0-K01 ACS/ACM36 ACM36-L1K0-K01 ACS/ACM36 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Performance Number of steps per revolution Number
Online data sheet AFM60B-S4PC AFS/AFM60 SSI ABSOLUTE ENCODERS
Online data sheet FM60-S4PC032768 FS/FM60 SSI C D E F H I J K L M N O P Q R S T Ordering information Type Part no. FM60-S4PC032768 1037504 Other models and accessories www.sick.com/fs_fm60_ssi Illustration
Absolute Rotary Encoder EXAG Explosion Proof. Device Net
Main Features - Approval: II 2 G/D EEx d II C T6 - Heavy-duty industrial model - Interface: - Max. 65536 steps per revolution (16 Bit) - Max. 16384 revolutions (14 Bit) - Code: Binary Programmable Parameters
Positioning drives DC motor, brushless Absolute multiturn position detection, Profibus-DP
Features Positioning drive with worm gear bevel geared shaft Profibus-DP Brushless DC motor Absolute multiturn position detection Nominal power output 80 W inputs programmable Separate communication and
LENORD. +BAUER... automates motion. Magnetic absolute rotary encoder GEL 2037 with heavy duty flange or tooth wheel adapter
Magnetic absolute rotary encoder GEL 2037 with heavy duty flange or tooth wheel adapter LENORD +BAUER... automates motion. Technical information Version 01.12 General Multiturn absolute rotary encoders
Product Information. ECN 413 ECN 425 ERN 421 ERN 487 Rotary Encoders for Drive Control in Elevators
Product Information ECN 413 ECN 425 ERN 421 ERN 487 Rotary Encoders for Drive Control in Elevators October 2007 ECN/ERN 400 Series Rotary Encoders with Integral Bearings for Elevator Technology Simple
MIG Encoders BEGE MIG NOVA+ Your drive, our (trans)mission. BEGE Power Transmission
MIG Encoders BEGE MIG NOVA+ BEGE Power Transmission Anton Philipsweg 30 2171 KX Sassenheim The Netherlands T: +31 252-220 220 E: bege@bege.nl W: www.bege.nl Your drive, our (trans)mission Mounting a conventional
NOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional
DS-58[20] Absolute position, rotary Electric Encoder
![DS-58[20] Absolute position, rotary Electric Encoder](/thumbs/80/80584881.jpg "DS-58[20] Absolute position, rotary Electric Encoder")
DS-58[20] Data Sheet, V 2.0b,June. 2013 DS-58[20] Absolute position, rotary Electric Encoder The DS-58[20] is a member of the DS series of Electric Encoders, based on Netzer Precision proprietary technology.
ABSOLUTE MAGNETIC ROTARY ENCODER ANALOG
High-resolution absolute encoder based on magnetic technology. Singleturn sensing based on 360 Hall effect technology. Multiturn sensing based on magnetic pulse counter. No batteries used. Main Features