PO74G2308A FEATURES: DESCRIPTION: Description. 700MHz TTL/CMOS Potato Chip. BUF_IN OUTPUT 1 to OUTPUT 8. Outputs. 1.2V - 3.6V 1:8 CMOS Clock Driver
|
|
|
- Bruce Jones
- 5 years ago
- Views:
Transcription
1 FEATURES:. Patented technology. Operating frequency up to 700MHz with 2pf load. Operating frequency up to 550MHz with 5pf load. Operating frequency up to 350MHz with 15pf load. Operating frequency up to 100MHz with 50pf load. Very low output pin to pin skew < 100ps. Very low pulse skew < 200ps. VCC = 1.2V to 3.6V. Propagation delay < 1.9ns max with 15pf load. Low input capacitance: 3pf typical. 1:8 fanout. Available in 16pin 150mil wide SOIC package. Available in 16pin 173mil wide TSSOP package Pin Configuration DESCRIPTION: Potato Semiconductor s is designed for world top performance using submicron CMOS technology to achieve 700MHz output frequency with less than 100ps output pin to pin skew. is a 1.2V to 3.6V CMOS 1 input to 8 Output Buffered Driver to achieve 700MHz output frequency. Typical applications are clock and signal distribution. s can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as translators in a mixed 3.3V/5V system environment. Logic Block Diagram BUF_IN OUTPUT1 OUTPUT2 V DD GND OUTPUT3 OUTPUT4 V DD NC OUTPUT8 OUTPUT7 V DD GND OUTPUT6 OUTPUT5 GND BUF_IN OUTPUT1 OUTPUT2 OUTPUT3 OUTPUT4 OUTPUT5 OUTPUT6 OUTPUT7 OUTPUT8 Pin Description Pin Name BUF_IN OUTPUT 1 to OUTPUT 8 Description Outputs 1 01/01/10
2 Maximum Ratings Description Max Unit Storage Temperature -65 to 150 C Operation Temperature -40 to 85 C Operation Voltage -0.5 to +4.6 V Voltage -0.5 to +5.5 V Output Voltage -0.5 to Vcc+0.5 V Note: stresses greater than listed under Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability specification is not implied. DC Electrical Characteristics Symbol Description Test Conditions Min Typ Max Unit VOH Output High voltage Vcc=3V Vin=VIH or VIL, IOH= -12mA V VOL Output Low voltage Vcc=3V Vin=VIH or VIL, IOH=12mA V VIH High voltage Guaranteed Logic HIGH Level ( Pin) V VIL Low voltage Guaranteed Logic LOW Level ( Pin) V IIH High current Vcc = 3.6V and Vin = 5.5V ua IIL Low current Vcc = 3.6V and Vin = 0V ua VIK Clamp diode voltage Vcc = Min. And IIN = -18mA V 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at Vcc = 3.3V, 25 C ambient. 3. This parameter is guaranteed but not tested. 4. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. 5. VoH = Vcc 0.6V at rated current 2 01/01/10
3 Power Supply Characteristics Symbol Description Test Conditions (1) Min Typ Max Unit IccQ Quiescent Power Supply Current Vcc=Max, Vin=Vcc or GND ua 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at Vcc = 3.3V, 25 C ambient. 3. This parameter is guaranteed but not tested. 4. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. Capacitance Parameters (1) Description Test Conditions Typ Max Unit Cin Capacitance Vin = 0V 3 4 pf Cout Output Capacitance Vout = 0V - 6 pf 1 This parameter is determined by device characterization but not production tested. Switching Characteristics Symbol Description Test Conditions (1) tplh Propagation Delay Buf_in to Output1 to Output9 CL = 15pF 1.9 ns tphl Propagation Delay Buf_in to Output1 to Output9 CL = 15pF 1.9 ns tr/tf Rise/Fall Time 0.8V 2.0V 0.8 ns tsk(p) Pulse Skew (Same Package) CL = 15pF, 125MHz 200 ps tsk(o) Output Pin to Pin Skew (Same Package) CL = 15pF, 125MHz 100 ps tsk(pp) Output Skew (Different Package) CL = 15pF, 125MHz 400 ps Max CL = 50pF 100 MHz CL =15pF 350 MHz CL = 5pF 550 MHz CL = 2pF 700 MHz 1. See test circuits and waveforms. 2. tplh, tphl, tsk(p), and tsk(o) are production tested. All other parameters guaranteed but not production tested. 3. Airflow of 1m/s is recommended for frequencies above 133MHz Unit 3 01/01/10
4 Test Waveforms Test Circuit 50Ohm 4 01/01/10
5 Packaging Mechanical Drawing: 16 pin SOIC BSC DENOTES DIMENSIONS IN MILLIMETERS Packaging Mechanical Drawing: 16 pin TSSOP DENOTES DIMENSIONS IN MILLIMETERS 5 01/01/10
6 Packaging Mechanical Drawing: 16 pin QSOP DENOTES DIMENSIONS IN MILLIMETERS IC Ordering Information Ordering Code Package Top-Marking T A PO49FCT2308ASU for Tube 16-pin 150mil SOIC PO49FCT2308AS PO49FCT2308ASR for Tape & Reel 16-pin 150mil SOIC PO49FCT2308AS PO49FCT2308ATU for Tube 16-pin 173mil TSSOP PO49FCT2308AT PO49FCT2308ATR for Tape & Reel 16-pin 173mil TSSOP PO49FCT2308AT PO49FCT2308AQU for Tube 16-pin 150mil QSOP PO49FCT2308AQ PO49FCT2308AQR for Tape & Reel 16-pin 150mil QSOP PO49FCT2308AQ IC Package Information PACKAGE CODE PACKAGE TYPE TAPE WIDTH (mm) TAPE PITCH (mm) TAPE & REEL PIN 1 LOCATION TAPE TRAILER LENGTH QTY PER TAPE TAPE LEADER LENGTH QTY PER TUBE S 16pin 150mil SOIC 12 8 Top Left Corner 39 (12 ) (20 ) 48 T 16pin 173mil TSSOP 12 8 Top Left Corner 39 (12 ) (20 ) 96 Q 16pin 150mil QSOP 12 8 Top Left Corner 39 (12 ) (20 ) /01/10
PO74G139A. Pin Configuration. Logic Block Diagram. Pin Description. 74 Series Noise Cancellation GHz Logic FEATURES: DESCRIPTION:
FEATURES:. Patented technology. Operating frequency up to 1.125GHz with 2pf load. Operating frequency up to 800MHz with 5pf load. Operating frequency up to 350MHz with 15pf load. VCC Operates from 1.65V
500MHz TTL/CMOS Potato Chip
FEATURES:. Patent pending technology. Max input frequency > 1GHz. Operating frequency up to 500MHz with 2pf load. Operating frequency up to 450MHz with 5pf load. Operating frequency up to 300MHz with 15pf
PO74G16240A. Pin Configuration. Logic Block Diagram. Truth Table. 74 Series Noise Cancellation GHz Logic DESCRIPTION: FEATURES:
FEATURES:. Patented technology. Operating frequency up to.25ghz with 2pf load. Operating frequency up to 700MHz with 5pf load. Operating frequency up to 300MHz with 5pf load. Operating frequency up to
PO54G14A, PO74G14A. Pin Configuration. 54, 74 Series Noise Cancellation GHz Logic FEATURES: DESCRIPTION: V CC 6A 6Y 5A 5Y 4A 4Y 1A 1Y 2A 2Y 3A 3Y GND
FEATURES:. Patented technology. Operating frequency up to 1.125GHz with 2pf load. Operating frequency up to 680MHz with 5pf load. Operating frequency up to 300MHz with 15pf load. Operating frequency up
PO54G00A, PO74G00A. Pin Configuration. Pin Description. Logic Block Diagram. 54, 74 Series Noise Cancellation GHz Logic FEATURES: DESCRIPTION: V CC 1B
FEATURES:. Patented technology. Specified From 40 C to 85 C, 40 C to 125 C, and 55 C to 125 C. Operating frequency up to 1.125GHz with 2pf load. Operating frequency up to 750MHz with 5pf load. Operating
PO74G553A. Pin Configuration. Logic Block Diagram. Pin Description. 800MHz Noise Cancellation TTL/CMOS Potato Chip
FEATURES:. Patented technology. Operating frequency up to 800Mz with 2pf load. Operating frequency up to 600Mz with 5pf load. Operating frequency up to 300Mz with 15pf load. Operating frequency up to 150Mz
PO54G374A, PO74G374A
OCTAL EDGETRIGGERED DTYPE FLIPFLOP WITH 3STATE OUTPUTS FEATURES:. Patented technology. Specified From 40 C to 85 C, 40 C to 25 C, and 55 C to 25 C. Operating frequency is faster than 600MHz. VCC Operates
FAST CMOS BUFFER/CLOCK DRIVER
FAST CMOS BUFFER/CLOCK DRIVER IDT49FCT80BT/CT FEATURES: 0. MICRON CMOS Technology Guaranteed low skew < 00ps (max.) Very low duty cycle distortion < 600ps (max.) Low CMOS power levels TTL compatible inputs
3.3V CMOS 1-TO-10 CLOCK DRIVER
3. CMOS 1-TO-10 CLOCK DRIVER 3. CMOS 1-TO-10 CLOCK DRIVER IDT74/A FEATURES: 0.5 MICRON CMOS Technology Guaranteed low skew < 350ps (max.) Very low duty cycle distortion < 350ps (max.) High speed: propagation
3.3V CMOS 20-BIT BUFFER
3. CMOS 20-BIT BUFFER 3. CMOS 20-BIT BUFFER IDT74FCT163827A/C FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model
3.3V CMOS 16-BIT REGISTER (3-STATE)
3. CMOS 16-BIT REGISTER (3-STATE) 3. CMOS 16-BIT REGISTER (3-STATE) IDT74FCT163374A/C FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; >
FAST CMOS 8-BIT IDENTITY COMPARATOR
FAST CMOS 8-BIT IDENTITY COMPARATOR IDT74FCT521AT/CT FEATURES: A and C grades Low input and output leakage 1µA (max.) CMOS power levels True TTL input and output compatibility: VOH = 3. (typ.) VOL = 0.
IDT74FCT257AT/CT/DT FAST CMOS QUAD 2-INPUT MULTIPLEXER
FAST CMOS QUAD 2-INPUT MULTIPLEXER IDT74FCT257AT/CT/DT FEATURES: A, C, and D grades Low input and output leakage 1µA (max.) CMOS power levels True TTL input and output compatibility: VOH = 3. (typ.) VOL
IDT74FCT540AT/CT FAST CMOS OCTAL BUFFER/LINE DRIVER DESCRIPTION: FUNCTIONAL BLOCK DIAGRAM FEATURES:
FAST CMOS OCTAL BUFFER/LINE DRIVER IDT74FCT540AT/CT FEATURES: Low input and output leakage 1µ A (max.) CMOS power levels True TTL input and output compatibility VOH = 3. (typ.) VOL = 0. (typ.) Meets or
IDT74FCT163373A/C 3.3V CMOS 16-BIT TRANSPARENT LATCH
3. CMOS 16-BIT TRANSPARENT LATCH 3. CMOS 16-BIT TRANSPARENT LATCH IDT74FCT163373A/C FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20
PI3CH360. Low Voltage, High-Bandwidth, 3-Channel 2:1 Mux/DeMux, NanoSwitch. Features. Description. Block Diagram. Pin Configuration.
Low Voltage, High-Bandwidth, 3-Channel 2:1 Features Near-Zero propagation delay 5Ω switches connect inputs to outputs High signal passing bandwidth (500 MHz) Beyond Rail-to-Rail switching 5V I/O tolerant
FAST CMOS 16-BIT REGISTER (3-STATE)
FAST CMOS 16-BIT REGISTER (3-STATE) IDT74FCT16374AT/CT/ET FEATURES: 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tsk(o) (Output Skew) < 250ps Low input and
3.3V CMOS IDT74LVCH16244A 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS, 5 VOLT TOLERANT I/O AND BUS-HOLD FEATURES: DESCRIPTION: DRIVE FEATURES:
3.3V CMOS IDT74LVCH16244A 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS, 5 T TOLERANT I/O AND BUS-HOLD FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine
PI6CL V/1.5V, 200MHz, 1:4 Networking Clock Buffer. Features. Description. Pin Description
Features High-speed, low-noise, non-inverting 1:4 buffer Maximum Frequency up to 200 MHz Low output skew < 100ps Low propagation delay < 3.5ns Optimized duty cycle 3.3 tolerent input 1.2 or 1.5 supply
FAST CMOS 16-BIT BIDIRECTIONAL 3.3V TO 5V TRANSLATOR
FAST CMOS 16-BIT BIDIRECTIONAL 3. TO 5V TRANSLATOR FAST CMOS 16-BIT BIDIRECTIONAL 3. TO 5V TRANSLATOR IDT74FCT164245T FEATURES: 0.5 MICRON CMOS Technology Bidirectional interface between 3. and 5V buses
FAST CMOS OCTAL LATCHED TRANSCEIVER
FAST CMOS OCTAL LATCHED TRANSCEIVER IDT74FCT543AT/CT FEATURES: A and C grades Low input and output leakage 1µA (max.) CMOS power levels True TTL input and output compatibility: VOH = 3. (typ.) VOL = 0.
IDT54/74FCT16240AT/CT/ET
FAST CMOS 16-BIT BUFFER/LINE DRIVER IDT54/74FCT16240AT/CT/ET FEATURES: 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tsk(o) (Output Skew) < 250ps Low input
3.3V CMOS 16-BIT BIDIRECTIONAL TRANSCEIVER
3. CMOS 16-BIT BIDIRECTIONAL TRANSCEIVER 3. CMOS 16-BIT BIDIRECTIONAL TRANSCEIVER IDT74FCT163245A/C FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883,
3.3V CMOS 16-BIT EDGE TRIGGERED D-TYPE FLIP- FLOP WITH 3-STATE OUTPUTS, 5 VOLT TOLERANT I/O, BUS-HOLD
3.3V CMOS 16-BIT EDGE TRIGGERED D-TYPE FLIP- FLOP WITH 3-STATE OUTPUTS, 5 T TOLERANT I/O, BUS-HOLD IDT74LVCH162374A FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015;
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS, 5 VOLT TOLERANT I/O
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS, 5 T TOLERANT I/O IDT74LVC16245A FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C
IDT54/74FCT16374AT/CT/ET
FAST CMOS 16-BIT REGISTER (3-STATE) IDT54/74FCT16374AT/CT/ET FEATURES: 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tsk(o) (Output Skew) < 250ps Low input
IDT54/74FCT162244T/AT/CT/ET
FAST CMOS 16-BIT BUFFER/LINE DRIVER IDT54/74FCT162244T/AT/CT/ET FEATURES: 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tsk(o) (Output Skew) < 250ps Low input
FAST CMOS 1-TO-10 CLOCK DRIVER
Integrated Device Technology, Inc. FAST CMOS 1-TO-10 CLOCK DRIVER IDT54/74FCT807BT/CT FEATURES: 0.5 MICRON CMOS Technology Guaranteed low skew < 250ps (max.) Very low duty cycle distortion < 350ps (max.)
ICS Low Skew PCI / PCI-X Buffer. General Description. Block Diagram. Pin Configuration. Pin Descriptions OE CLK0
Low Skew PCI / PCI-X Buffer General Description The ICS9112-27 is a high performance, low skew, low jitter PCI / PCI-X clock driver. It is designed to distribute high speed signals in PCI / PCI-X applications
FAST CMOS 20-BIT BUFFERS
FAST CMOS 20-BIT BUFFERS IDT54/74FCT16827AT/BT/CT/ET IDT54/74FCT162827AT/BT/CT/ET Integrated Device Technology, Inc. FEATURES: Common features: 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement
3.3V CMOS 16-BIT 2DIR 1OE 36
3.3V CMOS 16-BIT IDT74LVCHR162245A BUS TRANSCEIVER WITH 3 STATE OUTPUTS, 5 T TOLERANT I/O, BUS-HOLD FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine
IDT74ALVC V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS IDT74ALVC16245 FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine
3.3V CMOS 16-BIT TRANS- PARENT D-TYPE LATCH WITH 3-STATE OUTPUTS AND BUS-HOLD
3.3V CMOS 16-BIT TRANS- PARENT D-TYPE LATCH WITH 3-STATE OUTPUTS AND BUS-HOLD IDT74ALVCH162373 FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method
PO3B10A. Truth Table. High Bandwidth Potato Chip. 2-Channel, 2:1 Mux/DeMux Switch w/ Single Enable GND V DD GND SEL
PO3B0A www.potatosemi.com FEATURES: Patented technology High signal -3db passing bandwidth at 3.5Gbps or.75ghz Near-Zero propagation delay CC =.65 to 3.6 Ultra-Low Quiescent Power: 0.µA typical Ideally
FAST CMOS BUFFER CLOCK/DRIVER
FAST CMOS BUFFER CLOCK/DRIVER IDT49FCT806BT/CT FEATURES: 0. MICRON CMOS Technology Guaranteed low skew < 00ps (max.) Very low duty cycle distortion < 600ps (max.) Low CMOS power levels TTL compatible inputs
3.3V CMOS 16-BIT DESCRIPTION: 2DIR 1OE 36
3.3V CMOS 16-BIT IDT74LVCH16245A BUS TRANSCEIVER WITH 3-STATE OUTPUTS, 5 T TOLERANT I/O AND BUS-HOLD FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine
3.3V CMOS 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS AND 5 VOLT TOLERANT I/O
3.3V CMOS 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS AND 5 T TOLERANT I/O IDT74LVC16373A FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH 8-BIT BUS SWITCH
FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs Pin compatible with the 74F245, 74FCT245, and 74FCT245T Low power CMOS proprietary technology
PI3C V/3.3V, High Bandwidth, Hot Insertion 8-Bit, 2-Port, Bus Switch. Description. Features. Pin Configuration. Block Diagram.
Features Near-Zero propagation delay 5-ohm switches connect inputs to outputs High Bandwidth Operation (>400 MHz) Permits Hot Insertion 5V I/O Tolerant Rail-to-Rail 3.3V or 2.5V Switching 2.5V Supply Voltage
PO3B402A. High Bandwidth Potato Chip OE1 Y1+ Y1- GND SEL3 SEL1 D3- D3+ OE2 Y2+ Y2- Y3+ M3- M3+ OE3 SEL2 OE3 Y3+ Y3- SEL3 OE4 Y4+ Y4- SEL4
FEATURES: Patented technology High signal -3db passing bandwidth at GHz Near-Zero propagation delay CC =.65 to 3.6 Ultra-Low Quiescent Power: 0.µA typical Ideally suited for low power applications Industrial
IDT74FCT2374AT/CT FAST CMOS OCTAL D REGISTER (3-STATE)
IT74FCT2374AT/CT FAST CMOS OCTAL REGISTER (3-STATE) FAST CMOS OCTAL REGISTER (3-STATE) INUSTRIAL TEMPERATURE RANGE IT74FCT2374AT/CT FEATURES: A and C grades Low input and output leakage 1µA (max.) CMOS
FAST CMOS 16-BIT REGISTER (3-STATE)
FAST CMOS 16-BIT REGISTER (3-STATE) IDT54/74FCT16374T/AT/CT/ET IDT54/74FCT162374T/AT/CT/ET Integrated Device Technology, Inc. FEATURES: Common features: 0.5 MICRON CMOS Technology High-speed, low-power
PI3V312. Low On-Resistance, 3.3V High-Bandwidth 4-Port, 2:1 Mux/DeMux VideoSwitch. Features. Description. Block Diagram. Pin Configuration S 1 Y A 4
Features Near-Zero propagation delay 5Ω switches connect inputs to outputs High signal passing bandwidth (500MHz) Beyond Rail-to-Rail switching 5V I/O tolerant with 3.3V supply 1.8V, 2.5V and 3.3V supply
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 5 VOLT TOLERANT I/O AND BUS-HOLD
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 5 T TOLERANT I/O AND BUS-HOLD IDT74LVCH162245A FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C =
PI5C3384 PI5C3384C. 10-Bit, 2-Port Bus Switch
PI5C3384 PI5C3384C 0-Bit, 2-Port Bus Switch Features: Near-Zero propagation delay 5Ω switches connect inputs to outputs Direct bus connection when switches are ON Ultra-low quiescent power (0.2μA typical)
FAST CMOS OCTAL BIDIRECTIONAL TRANSCEIVER
IDT74FCT2245T/CT FST CMOS OCTL BIDIRECTIONL TRNSCEIVER FST CMOS OCTL BIDIRECTIONL TRNSCEIVER INDUSTRIL TEMPERTURE RNGE IDT74FCT2245T/CT FETURES: and C grades Low input and output leakage 1μ (max.) CMOS
3.3V ZERO DELAY CLOCK BUFFER, SPREAD SPECTRUM COMPATIBLE
3.3V ZERO DELAY CLOCK BUFFER, SPREAD SPECTRUM COMPATIBLE IDT23S05 FEATURES: Phase-Lock Loop Clock Distribution 10MHz to 133MHz operating frequency Distributes one clock input to one bank of five outputs
HIGH-PERFORMANCE CMOS BUS TRANSCEIVERS
Integrated Device Technology, Inc. HIGH-PERFORMAE CMOS BUS TRANSCEIVERS IDT54/74FCT86A/B IDT54/74FCT863A/B FEATURES: Equivalent to AMD s Am2986-64 bipolar registers in pinout/function, speed and output
3.3V ZERO DELAY CLOCK MULTIPLIER
3.3V ZERO DELAY CLOCK MULTIPLIER IDT2308 FEATURES: Phase-Lock Loop Clock Distribution for Applications ranging from 10MHz to 1 operating frequency Distributes one clock input to two banks of four outputs
PI5C3384 PI5C3384C PI5C32384 (25Ω)
PI5C3384 PI5C3384C PI5C32384 (25Ω) 0-Bit, 2-Port Bus Switch Features: Near-Zero propagation delay Low noise, 25Ω version (PI5C32384) 5Ω switches connect inputs to outputs (PI5C3384) Direct bus connection
DIFFERENTIAL ECL-to-TTL TRANSLATOR
DIFFERENTIAL ECL-to-TTL TRANSLATOR FEATURES DESCRIPTION 2.6ns typical propagation delay Differential ECL inputs 24mA TTL outputs Flow-through pinouts Available in 8-pin SOIC package The is a differential
SN75158 DUAL DIFFERENTIAL LINE DRIVER
SN78 Meets or Exceeds the Requirements of ANSI EIA/TIA--B and ITU Recommendation V. Single -V Supply Balanced-Line Operation TTL Compatible High Output Impedance in Power-Off Condition High-Current Active-Pullup
CMOS 16-BIT 3.3V TO 5V LEVEL SHIFTING TRANSCEIVER WITH 3-STATE OUTPUTS 2DIR 48 1OE. 3.3V Port. 5V Port
FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C = 200pF, R = 0) VCCA = 2.7V to 3.6V VCCB = 5V ± 0.5V CMOS power
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH 16:8 MULTIPLEXER
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH 16:8 MULTIPLEXER IDTQS32390 FEATURES: Enhanced N channel FET with no inherent diode to Vcc 16:8 multiplexer function with zero delay 5Ω bidirectional switches
ICS DIMM Buffer. Integrated Circuit Systems, Inc. General Description. Block Diagram. Pin Configuration
Integrated Circuit Systems, Inc. ICS9179-12 3 DIMM Buffer General Description The ICS9179-12 is a buffer intended for reduced pin count 2 - chip Intel BX chipset designs An I 2 C interface is included,
PI3L V Quad, 2:1 Mux/DeMux Fast Ethernet LAN Switch w/ Single Enable. Description. Features. Applications. Pin Configuration.
Features R ON is 4Ω typical Low crosstalk: 27dB @ 250 MHz Near-Zero propagation delay: 250ps Switching speed: 9ns Channel On capacitance: 9pF (typical) Operating Range: +3.0V to +3.6V >2kV ESD protection
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH DUAL 4:1 MUX/DEMUX
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH DUAL :1 MUX/DEMUX IDTQS353 FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs Pin compatible
PI5C3253. Dual 4:1 Mux/DeMux Bus Switch
Features Near-Zero propagation delay 5Ω switches connect inputs to outputs Direct bus connection when switches are ON Ultra Low Quiescent Power (0.2µA typical) Ideally suited for notebook applications
PI3C3126. Description. Features. 14-Pin Configuration. Applications. Block Diagram. 16-Pin Configuration. Truth Table (1) Pin Description.
2./3.3, High Bandwidth, Hot Insertion,4-Bit, 2-Port Bus Switch with Individual Enables Features Near-Zero propagation delay -ohm switches connect inputs to outputs High Bandwidth (>400 MHz) 2./3.3 Supply
PI5C16861 PI5C (25Ω) 20-Bit, 2-Port Bus Switch
PI5C8 PI5C28 (25Ω) Features Near-Zero propagation delay 5Ω or 25Ω switches connect inputs to outputs Direct bus connection when switches are ON 32X384 function with flow through pinout make board layout
3.3V ZERO DELAY CLOCK MULTIPLIER
3.3V ZERO DELAY CLOCK MULTIPLIER FEATURES: Phase-Lock Loop Clock Distribution for Applications ranging from 10MHz to 1 operating frequency Distributes one clock input to two banks of four outputs Separate
PI3C V/3.3V, High Bandwidth, Hot Insertion 10-Bit, 2-Port, Bus Switch
2.5V/3., High Bandwidth, Hot Insertion Features Near-Zero propagation delay 5-ohm switches connect inputs to outputs High Bandwidth (>400 MHz) Permits Hot Insertion. Rail-to-Rail, 3. or 2.5V ing 5V I/O
5V/3.3V TTL-TO-DIFFERENTIAL PECL TRANSLATOR
5V/3.3V TTL-TO-DIFFERENTIAL PECL TRANSLATOR FEATURES 3.3V and 5V power supply options 300ps typical propagation delay Low power Differential PECL output PNP TTL input for minimal loading Flow-through pinouts
CDC337 CLOCK DRIVER WITH 3-STATE OUTPUTS
Low Output Skew, Low Pulse Skew for Clock-Distribution and Clock-Generation Applications TTL-Compatible Inputs and CMOS-Compatible Outputs Distributes One Clock Input to Eight Outputs Four Same-Frequency
PI3CH360 3-Channel 2:1 Mux/DeMux, Enable Low 1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug
1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug Features Near-Zero propagation delay 5-ohm switches connect inputs to outputs High signal passing bandwidth (500 MHz) Beyond Rail-to-Rail switching - 0 to 5V switching
AM26LS31 QUADRUPLE DIFFERENTIAL LINE DRIVER
AM6LS SLLSG JANUARY 979 REVISED FEBRUARY Meets or Exceeds the Requirements of ANSI TIA/EIA--B and ITU Recommendation V. Operates From a Single -V Supply TTL Compatible Complementary Outputs High Output
SN54LS07, SN74LS07, SN74LS17 HEX BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS
Convert TTL Voltage Levels to MOS Levels High Sink-Current Capability Clamping Diodes Simplify System Design Open-Collector Driver for Indicator Lamps and Relays description These hex buffers/drivers feature
BIDIRECTIONAL TRANSCEIVER
IDT/FCTT/T/CT FST CMOS OCTL BIDIRECTIONL TRNSCEIVER FST CMOS OCTL BIDIRECTIONL TRNSCEIVER MILITRY ND INDUSTRIL TEMPERTURE RNGES IDT/FCTT/T/CT FETURES: Std.,, and C grades Low input and output leakage µ
PI3V514. Low On-Resistance, 3.3V High-Bandwidth 5-port, 4:1 Mux/DeMux VideoSwitch. Description. Features. Pin Configuration.
Features Near-Zero propagation delay 5Ω switches connect inputs to outputs High signal passing bandwidth (400 MHz) Beyond Rail-to-Rail switching 5V I/O tolerant with 3.3V supply 2.5V and 3.3V supply voltage
ICS2304NZ-1 LOW SKEW PCI/PCI-X BUFFER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS2304NZ-1 Description The ICS2304NZ-1 is a high-performance, low skew, low jitter PCI/PCI-X clock driver. It is designed to distribute high-speed signals in PCI/PCI-X applications operating
ICS2510C. 3.3V Phase-Lock Loop Clock Driver. Integrated Circuit Systems, Inc. General Description. Pin Configuration.
Integrated Circuit Systems, Inc. ICS250C 3.3V Phase-Lock Loop Clock Driver General Description The ICS250C is a high performance, low skew, low jitter clock driver. It uses a phase lock loop (PLL) technology
PI5C3253. Dual 4:1 Mux/DeMux Bus Switch
Features Near-Zero propagation delay 5Ω switches connect inputs to outputs Direct bus connection when switches are ON ESD Protection up to 2kV HBM Ultra Low Quiescent Power (0.2μA typical) Ideally suited
SN5414, SN54LS14, SN7414, SN74LS14 HEX SCHMITT-TRIGGER INVERTERS
Operation From Very Slow Edges Improved Line-Receiving Characteristics High Noise Immunity SN5414, SN54LS14, SN5414, SN54LS14...J OR W PACKAGE SN7414... D, N, OR NS PACKAGE SN74LS14... D, DB, OR N PACKAGE
Description IA 3 IA 2 IA 1 GND. Truth Table (1) H X X Hi-Z Disable S 0-1. L L L I0 S1-0 = 0 L L H I1 S1-0 = 1 Y A to Y B
Features Near-Zero propagation delay 5Ω switches connect inputs to outputs High signal passing bandwidth (300MHz) Beyond Rail-to-Rail switching 5V I/O tolerant with 3.3V supply 2.5V and 3.3V supply voltage
FAST CMOS OCTAL BUFFER/LINE DRIVER
Integrated Device Technology, Inc. FAST CMOS OCTAL BUFFER/LINE DRIVER IDT4/4FCT240/A/C IDT4/4FCT241/A/C IDT4/4FCT244/A/C IDT4/4FCT40/A/C IDT4/4FCT41/A/C FEATURES: IDT4/4FCT240/241/244/40/41 equivalent
3.3V ZERO DELAY CLOCK BUFFER
3.3V ZERO DELAY CLOCK BUFFER IDT2309 FEATURES: Phase-Lock Loop Clock Distribution 10MHz to 1 operating frequency Distributes one clock input to one bank of five and one bankd of four outputs Separate output
PI74LPT244. Fast CMOS 3.3V 8-Bit Buffer/Line Driver. Features. Description. Block Diagram. Pin Configuration
Fast CMOS 3.3V 8-Bit Buffer/Line Driver Features Compatible with LCX and LVT families of products Supports 5V Tolerant Mixed Signal Mode Operation Input can be 3V or 5V Output can be 3V or connected to
PI3B V, Synchronous 16-Bit to 32-Bit FET Mux/DeMux NanoSwitch. Description. Features. Pin Configuration. Block Diagram.
PI363 3.3, Synchronous 6-it to 3-it FET Mux/DeMux NanoSwitch Features Near-Zero propagation delay. Ω Switches Connect etween Two Ports Packaging: - -pin 40mil Wide Thin Plastic TSSOP (A) - -pin 300mil
MC3487 QUADRUPLE DIFFERENTIAL LINE DRIVER
Meets or Exceeds Requirements of ANSI EIA/TIA-422-B and ITU Recommendation V. -State, TTL-Compatible s Fast Transition Times High-Impedance Inputs Single -V Supply Power-Up and Power-Down Protection Designed
PL V-3.3V Low-Skew 1-4 Differential PECL Fanout Buffer
-48 FEATURES Four differential 2.5V/3.3V LVPECL output pairs. Output Frequency: 1GHz. Two selectable differential input pairs. Translates any standard single-ended or differential input format to LVPECL
LOW-VOLTAGE QUADRUPLE BUS SWITCH 11 4B
LOW-VOLTAGE QUADRUPLE BUS ITCH IDT7CBTLV6 FEATURES: Pin-out compatible with standard '6 Logic products Ω A/B bi-directional switch Isolation under power-off conditions Over-voltage tolerant Latch-up performance
54ACT11020, 74ACT11020 DUAL 4-INPUT POSITIVE-NAND GATES
Inputs Are TTL-Voltage Compatible Flow-Through Architecture to Optimize PCB Layout Center-Pin V CC and GND Configurations to Minimize High-Speed Switching Noise EPIC (Enhanced-Performance Implanted CMOS)
SN65LVDM31 HIGH-SPEED DIFFERENTIAL LINE DRIVER
HIH-SPEED DIFFERENTIAL LINE DRIVER Designed for Signaling Rates Up to 5 Mbps Low-Voltage Differential Signaling With Typical Output Voltage of 7 mv and a -Ω Load Propagation Delay Time of. ns, Typical
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at ore.hu.
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at www.hest ore.hu. Convert TTL Voltage Levels to MOS Levels High Sink-Current Capability Clamping
PI74LPT V, 16-Bit Buffer/Line Driver. Features. Description. Block Diagram
Features Compatible with LCX and LVT families of products Supports 5V Tolerant Mixed Signal Mode Operation Input can be 3V or 5V Output can be 3V or connected to 5V bus Advanced Low Power CMOS Operation
SN54LS06, SN74LS06, SN74LS16 HEX INVERTER BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS
Convert TTL Voltage Levels to MOS Levels High Sink-Current Capability Clamping Diodes Simplify System Design Open-Collector Driver for Indicator Lamps and Relays s Fully Compatible With Most TTL Circuits
Presettable Counter High-Speed Silicon-Gate CMOS
TECHNICAL DATA IN74AC161 Presettable Counter High-Speed Silicon-Gate CMOS The IN74AC161 is identical in pinout to the LS/ALS161, HC/HCT161. The device inputs are compatible with standard CMOS outputs;
ICS Glitch-Free Clock Multiplexer
Description The ICS580-01 is a clock multiplexer (mux) designed to switch between 2 clock sources with no glitches or short pulses. The operation of the mux is controlled by an input pin but the part can
PI3DBS V High Speed 2 : 4 Differential Mux/Demux
3.3V High Speed 2 : 4 Differential Mux/Demux Features ÎÎ2:4 Differential Multiplexer/Demultiplexer ÎÎBidirectional Operation ÎÎCan be used in à à Single :4 Configuration à à Dual :2 Configuration à à Fan
PI2PCIE V, PCI Express Gen2 Compliant, 4-Differential Channel, 2:1 Mux/DeMux Switch
Features 4 Differential Channel, 2:1 Mux/DeMux PCI Express, Gen 2 Performance, 5.0Gbps Low Bit-to-Bit Skew, 7ps max (between '+' and '-' bits) Low Crosstalk: -23dB@3 GHz Low Off Isolation: -23dB@3 GHz
PI6C B. 3.3V Low Jitter 1-to-4 Crystal/LVCMOS to LVPECL Fanout Buffer. Description. Features. Block Diagram. Pin Diagram
Features Maximum output frequency: 500MHz 4 pair of differential LPECL outputs Selectable and crystal inputs accepts LCMOS, LTTL input level Ultra low additive phase jitter: < 0.05 ps (typ) (differential
PI5C Bit, 2-Port Bus Switch. Features. Description. Pin Configuration. Block Diagram. Pin Description. Truth Table (1) Pin Name Description
Features ÎÎNear-Zero propagation delay ÎÎ5-ohm switches connect inputs to outputs ÎÎDirect bus connection when switches are on ÎÎUltra Low Quiescent Power (0.2μA typical) Ideally suited for notebook applications
CDC LINE TO 10-LINE CLOCK DRIVER WITH 3-STATE OUTPUTS SCAS442B FEBRUARY 1994 REVISED NOVEMBER 1995
Low Skew, Low Pulse Skew for Clock-Distribution and Clock-Generation pplications Operates at 3.3-V LVTTL-Compatible Inputs and s Supports Mixed-Mode Signal Operation (-V Input and Voltages With 3.3-V )
Description D2+A D2-A D3+A D3-A D0+B D0-B D1+B D1-B D2+B D2-B D3+B D3-B AUX+ A AUX- A HPD A CAB_DETA/LEDA AUX+ B AUX- B HPD B CAB_DETB/LEDB
High Bandwidth 6-differential Channel, 1:2 Demux Features 4 Differential Channel, 1:2 DeMux that will support 2.7Gbps DP rev 1.1a signals 1-channel 1:2 demux for DP_HPD signal 1-differential channel 1:2
LOW POWER SCHOTTKY. GUARANTEED OPERATING RANGES ORDERING INFORMATION
The SN74LS298 is a Quad 2-Port Register. It is the logical equivalent of a quad 2-input multiplexer followed by a quad 4-bit edge-triggered register. A Common Select input selects between two 4-bit input
Dual, 3 V, CMOS, LVDS High Speed Differential Driver ADN4663
Dual, 3 V, CMOS, LVDS High Speed Differential Driver ADN4663 FEATURES ±15 kv ESD protection on output pins 600 Mbps (300 MHz) switching rates Flow-through pinout simplifies PCB layout 300 ps typical differential
MC3486 QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUTS
Meets or Exceeds the Requirements of ANSI Standards EIA/TIA-422-B and EIA/TIA-423-B and ITU Recommendations V.10 and V.11 3-State, TTL-Compatible s Fast Transition Times Operates From Single 5-V Supply
SN54LS245, SN74LS245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
3-State s Drive Bus Lines Directly PNP s Reduce dc Loading on Bus Lines Hysteresis at Bus s Improves Noise Margins Typical Propagation Delay Times Port to Port, 8 ns TYPE IOL (SINK CURRENT) IOH (SOURCE
MOS INTEGRATED CIRCUIT
DATA SHEET MOS INTEGRATED CIRCUIT µpd6345 8 BIT SERIAL IN/PARALLEL OUT DRIVER The µpd6345 is a monolithic Bi-CMOS integrated Circuit designed to drive LED, Solenoid and Relay. This device consists of an
SN54LS373, SN54LS374, SN54S373, SN54S374, SN74LS373, SN74LS374, SN74S373, SN74S374 OCTAL D-TYPE TRANSPARENT LATCHES AND EDGE-TRIGGERED FLIP-FLOPS
SN54LS373, SN54LS374, SN54S373, SN54S374, Choice of Eight Latches or Eight D-Type Flip-Flops in a Single Package 3-State Bus-Driving s Full Parallel Access for Loading Buffered Control s Clock-Enable Has