PO54G374A, PO74G374A
|
|
- Annice Floyd
- 6 years ago
- Views:
Transcription
1 OCTAL EDGETRIGGERED DTYPE FLIPFLOP WITH 3STATE OUTPUTS FEATURES:. Patented technology. Specified From 40 C to 85 C, 40 C to 25 C, and 55 C to 25 C. Operating frequency is faster than 600MHz. VCC Operates from.65v to 3.6V. Propagation delay < 2.4 max with 5pf load. Low input capacitance: 4pf typical. LatchUp Performance Exceeds 250 ma Per JESD 7. ESD Protection Exceeds JESD VHumanBodyModel (A4A). 200VMachineModel (A5A). Available in 20pin TSSOP package. Available in 20pin Ceramic Dual Flatpack. Available in 20pin Leadless Ceramic Chip Carrier DESCRIPTION: Potato Semiconductor s PO74G374A is designed for world top performance using submicron CMOS technology to achieve higher than 600MHz TTL /CMOS output frequency with less than 2.4 propagation delay. This dual Octal edge triggered Dtype flipflops are designed for.65v to 3.6V VCC operation. Inputs can be driven from either 3.3V or 5V devices. This feature allows the use of these devices as tralators in a mixed 3.3V/5V system environment. Pin Configuration OE Q 2D 2Q 3Q 3D 4D 4Q GND V CC 8Q 8D 7D 7Q 6Q 6D 5D 5Q CLK 2D 2Q 3Q 3D 4D Q OE 5Q 5D 8Q Q GND CLK V CC 8D 7D 7Q 6Q 6D Pin Description Logic Block Diagram INPUTS OE CLK D OUTPUT Q OE L H H L L L CLK 3 C 2 Q L H or L X Q 0 H X X Z To Seven Other Channels 0/0/0
2 OCTAL EDGETRIGGERED DTYPE FLIPFLOP WITH 3STATE OUTPUTS Maximum Ratings Description Max Unit Storage Temperature 65 to 50 C Operation Temperature 55 to 25 C Operation Voltage 0.5 to +4.6 V Input Voltage 0.5 to +5.5 V Voltage 0.5 to Vcc+0.5 V Note: stresses greater than listed under Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditio above those indicated in the operational sectio of this specification is not implied. Exposure to absolute maximum rating conditio for extended periods may affect reliability specification is not implied. DC Electrical Characteristics Symbol Description Test Conditio Min Typ Max Unit VOH High voltage Vcc=3V Vin=VIH or VIL, IOH= 2mA V VOL Low voltage Vcc=3V Vin=VIH or VIL, IOH=2mA V VIH Input High voltage Guaranteed Logic HIGH Level (Input Pin) V VIL Input Low voltage Guaranteed Logic LOW Level (Input Pin) V IIH Input High current Vcc = 3.6V and Vin = 5.5V 5 ua IIL Input Low current Vcc = 3.6V and Vin = 0V 5 ua VIK Clamp diode voltage Vcc = Min. And IIN = 8mA V. For conditio shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at Vcc = 3.3V, 25 C ambient. 3. This parameter is guaranteed but not tested. 4. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. 5. VoH = Vcc 0.6V at rated current 2 0/0/0
3 OCTAL EDGETRIGGERED DTYPE FLIPFLOP WITH 3STATE OUTPUTS Power Supply Characteristics Symbol Description Test Conditio () Min Typ Max Unit IccQ Quiescent Power Supply Current Vcc=Max, Vin=Vcc or GND ua. For conditio shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at Vcc = 3.3V, 25 C ambient. 3. This parameter is guaranteed but not tested. 4. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. Capacitance Parameters () Description Test Conditio Typ Unit Cin Input Capacitance Vin = 0V 4 pf Cout Capacitance Vout = 0V 6 pf This parameter is determined by device characterization but not production tested. Switching Characteristics Symbol tsu th tplh tpzh or tpzl Enable Time CL = 5pF tphz or tplz Description Setup time before CLK Hold time, data after CLK Disable Time Test Conditio () CL = 5pF Max Propagation Delay CLK to Q CL = 5pF 2.4 tphl Propagation Delay CLK to Q CL = 5pF 2.4 tr/tf Rise/Fall Time 0.8V 2.0V 0.8 fmax Min Unit Input Frequency CL=2pF 5pF 600 MHz. See test circuits and waveforms. 2. tplh, tphl, tsu, and th are production tested. All other parameters guaranteed but not production tested. 3. Airflow of m/s is recommended for frequencies above 500MHz 3 0/0/0
4 OCTAL EDGETRIGGERED DTYPE FLIPFLOP WITH 3STATE OUTPUTS Test Waveforms t w Timing Input Input PULSE DURATION Data Input t su t h SETUP AND HOLD TIMES Input Control t PLH t PHL V OH V OL Waveform S at VLOAD (see Note B) t PZL t PLZ V OL + V V LOAD /2 V OL t PHL t PLH PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS V OH V OL Waveform 2 S at GND (see Note B) t PZH t PHZ V OH V ENABLE AND DISABLE TIMES LOW AND HIGHLEVEL ENABLING V OH Test Circuit Vcc Pulse Generator D.U.T 50Ohm 50pF to 2pF 4 0/0/0
5 OCTAL EDGETRIGGERED DTYPE FLIPFLOP WITH 3STATE OUTPUTS Packaging Mechanical Drawing: 20 pin TSSOP Max SEATING PLANE BSC DENOTES DIMENSIONS IN MILLIMETERS Packaging Mechanical Drawing: 20pin Leadless Ceramic Chip Carrier 5 0/0/0
6 OCTAL EDGETRIGGERED DTYPE FLIPFLOP WITH 3STATE OUTPUTS Packaging Mechanical Drawing: 20pin Ceramic Dual Flatpack (0,5) 0.00 (0,25) (2,03) (,63) (0,5) 0.00 (0,25) (,40) (,4) (,4) (0,89) (0,7) (0,54) (,27) (,4) (0,89) (9,09) (8,69) (9,09) (7,80) Denotes dimeio in inches Denotes dimeio in millimenters IC Ordering Information PO54G374ALU for Tube 20pin Leadless Pbfree & Green POTATO54G374AL 55 C to 25 C Ceramic Chip Carrier 20pin Ceramic PO54G374AFU for Tube Pbfree & Green POTATO54G374AF 55 C to 25 C Dual Flatpack IC Package Information PACKAGE CODE Ordering Code PO74G374ATU for Tube PO74G374ATR for Tape & Reel PACKAGE TYPE TAPE WIDTH (mm) TAPE PITCH (mm) L LCCC 20 N/A N/A N/A 20pin TSSOP 20pin TSSOP PIN LOCATION Package Pbfree & Green Pbfree & Green TAPE TRAILER LENGTH TopMarking POTATO74G374AT POTATO74G374AT QTY PER REEL TAPE LEADER LENGTH 40 C to 85 C 40 C to 85 C T TSSOP Top Left Corner 39 (2 ) (20 ) 74 N/A N/A N/A 55 F CFP 20 N/A N/A N/A N/A N/A N/A 85 T A QTY PER TUBE 6 0/0/0
PO54G14A, PO74G14A. Pin Configuration. 54, 74 Series Noise Cancellation GHz Logic FEATURES: DESCRIPTION: V CC 6A 6Y 5A 5Y 4A 4Y 1A 1Y 2A 2Y 3A 3Y GND
FEATURES:. Patented technology. Operating frequency up to 1.125GHz with 2pf load. Operating frequency up to 680MHz with 5pf load. Operating frequency up to 300MHz with 15pf load. Operating frequency up
More informationPO54G00A, PO74G00A. Pin Configuration. Pin Description. Logic Block Diagram. 54, 74 Series Noise Cancellation GHz Logic FEATURES: DESCRIPTION: V CC 1B
FEATURES:. Patented technology. Specified From 40 C to 85 C, 40 C to 125 C, and 55 C to 125 C. Operating frequency up to 1.125GHz with 2pf load. Operating frequency up to 750MHz with 5pf load. Operating
More informationPO74G16240A. Pin Configuration. Logic Block Diagram. Truth Table. 74 Series Noise Cancellation GHz Logic DESCRIPTION: FEATURES:
FEATURES:. Patented technology. Operating frequency up to.25ghz with 2pf load. Operating frequency up to 700MHz with 5pf load. Operating frequency up to 300MHz with 5pf load. Operating frequency up to
More informationPO74G139A. Pin Configuration. Logic Block Diagram. Pin Description. 74 Series Noise Cancellation GHz Logic FEATURES: DESCRIPTION:
FEATURES:. Patented technology. Operating frequency up to 1.125GHz with 2pf load. Operating frequency up to 800MHz with 5pf load. Operating frequency up to 350MHz with 15pf load. VCC Operates from 1.65V
More informationPO74G2308A FEATURES: DESCRIPTION: Description. 700MHz TTL/CMOS Potato Chip. BUF_IN OUTPUT 1 to OUTPUT 8. Outputs. 1.2V - 3.6V 1:8 CMOS Clock Driver
FEATURES:. Patented technology. Operating frequency up to 700MHz with 2pf load. Operating frequency up to 550MHz with 5pf load. Operating frequency up to 350MHz with 15pf load. Operating frequency up to
More information500MHz TTL/CMOS Potato Chip
FEATURES:. Patent pending technology. Max input frequency > 1GHz. Operating frequency up to 500MHz with 2pf load. Operating frequency up to 450MHz with 5pf load. Operating frequency up to 300MHz with 15pf
More informationPO74G553A. Pin Configuration. Logic Block Diagram. Pin Description. 800MHz Noise Cancellation TTL/CMOS Potato Chip
FEATURES:. Patented technology. Operating frequency up to 800Mz with 2pf load. Operating frequency up to 600Mz with 5pf load. Operating frequency up to 300Mz with 15pf load. Operating frequency up to 150Mz
More informationPO3B402A. High Bandwidth Potato Chip OE1 Y1+ Y1- GND SEL3 SEL1 D3- D3+ OE2 Y2+ Y2- Y3+ M3- M3+ OE3 SEL2 OE3 Y3+ Y3- SEL3 OE4 Y4+ Y4- SEL4
FEATURES: Patented technology High signal -3db passing bandwidth at GHz Near-Zero propagation delay CC =.65 to 3.6 Ultra-Low Quiescent Power: 0.µA typical Ideally suited for low power applications Industrial
More informationPO3B10A. Truth Table. High Bandwidth Potato Chip. 2-Channel, 2:1 Mux/DeMux Switch w/ Single Enable GND V DD GND SEL
PO3B0A www.potatosemi.com FEATURES: Patented technology High signal -3db passing bandwidth at 3.5Gbps or.75ghz Near-Zero propagation delay CC =.65 to 3.6 Ultra-Low Quiescent Power: 0.µA typical Ideally
More informationPI3CH360. Low Voltage, High-Bandwidth, 3-Channel 2:1 Mux/DeMux, NanoSwitch. Features. Description. Block Diagram. Pin Configuration.
Low Voltage, High-Bandwidth, 3-Channel 2:1 Features Near-Zero propagation delay 5Ω switches connect inputs to outputs High signal passing bandwidth (500 MHz) Beyond Rail-to-Rail switching 5V I/O tolerant
More informationPI3C V/3.3V, High Bandwidth, Hot Insertion 10-Bit, 2-Port, Bus Switch
2.5V/3., High Bandwidth, Hot Insertion Features Near-Zero propagation delay 5-ohm switches connect inputs to outputs High Bandwidth (>400 MHz) Permits Hot Insertion. Rail-to-Rail, 3. or 2.5V ing 5V I/O
More information3.3V CMOS 16-BIT REGISTER (3-STATE)
3. CMOS 16-BIT REGISTER (3-STATE) 3. CMOS 16-BIT REGISTER (3-STATE) IDT74FCT163374A/C FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; >
More informationPI5C3384 PI5C3384C. 10-Bit, 2-Port Bus Switch
PI5C3384 PI5C3384C 0-Bit, 2-Port Bus Switch Features: Near-Zero propagation delay 5Ω switches connect inputs to outputs Direct bus connection when switches are ON Ultra-low quiescent power (0.2μA typical)
More informationSN54LS373, SN54LS374, SN54S373, SN54S374, SN74LS373, SN74LS374, SN74S373, SN74S374 OCTAL D-TYPE TRANSPARENT LATCHES AND EDGE-TRIGGERED FLIP-FLOPS
Choice of Eight Latches or Eight D-Type Flip-Flops in a Single Package 3-State Bus-Driving Outputs Full Parallel Access for Loading Buffered Control Inputs Clock-Enable Input Has Hysteresis to Improve
More informationIDT74FCT540AT/CT FAST CMOS OCTAL BUFFER/LINE DRIVER DESCRIPTION: FUNCTIONAL BLOCK DIAGRAM FEATURES:
FAST CMOS OCTAL BUFFER/LINE DRIVER IDT74FCT540AT/CT FEATURES: Low input and output leakage 1µ A (max.) CMOS power levels True TTL input and output compatibility VOH = 3. (typ.) VOL = 0. (typ.) Meets or
More informationIDT74FCT257AT/CT/DT FAST CMOS QUAD 2-INPUT MULTIPLEXER
FAST CMOS QUAD 2-INPUT MULTIPLEXER IDT74FCT257AT/CT/DT FEATURES: A, C, and D grades Low input and output leakage 1µA (max.) CMOS power levels True TTL input and output compatibility: VOH = 3. (typ.) VOL
More informationFAST CMOS 16-BIT REGISTER (3-STATE)
FAST CMOS 16-BIT REGISTER (3-STATE) IDT74FCT16374AT/CT/ET FEATURES: 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tsk(o) (Output Skew) < 250ps Low input and
More informationFAST CMOS OCTAL BUFFER/LINE DRIVER
Integrated Device Technology, Inc. FAST CMOS OCTAL BUFFER/LINE DRIVER IDT4/4FCT240/A/C IDT4/4FCT241/A/C IDT4/4FCT244/A/C IDT4/4FCT40/A/C IDT4/4FCT41/A/C FEATURES: IDT4/4FCT240/241/244/40/41 equivalent
More informationHIGH-PERFORMANCE CMOS BUS TRANSCEIVERS
Integrated Device Technology, Inc. HIGH-PERFORMAE CMOS BUS TRANSCEIVERS IDT54/74FCT86A/B IDT54/74FCT863A/B FEATURES: Equivalent to AMD s Am2986-64 bipolar registers in pinout/function, speed and output
More information3.3V CMOS 20-BIT BUFFER
3. CMOS 20-BIT BUFFER 3. CMOS 20-BIT BUFFER IDT74FCT163827A/C FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model
More informationPI3USB10LP-A. USB 2.0 High-Speed (480 Mbps) Signal Switch Targeted for Battery Powered Applications. Description. Features.
Features USB 2.0 compliant (high speed and full speed) R ON is 5.5Ω typical @ V CC = 3.0V Low bit-to-bit skew Low Crosstalk: 40dB @ 500 Mbps Off Isolation: 35dB @ 500 Mbps Near-Zero propagation delay:
More informationFAST CMOS 8-BIT IDENTITY COMPARATOR
FAST CMOS 8-BIT IDENTITY COMPARATOR IDT74FCT521AT/CT FEATURES: A and C grades Low input and output leakage 1µA (max.) CMOS power levels True TTL input and output compatibility: VOH = 3. (typ.) VOL = 0.
More informationPI3V312. Low On-Resistance, 3.3V High-Bandwidth 4-Port, 2:1 Mux/DeMux VideoSwitch. Features. Description. Block Diagram. Pin Configuration S 1 Y A 4
Features Near-Zero propagation delay 5Ω switches connect inputs to outputs High signal passing bandwidth (500MHz) Beyond Rail-to-Rail switching 5V I/O tolerant with 3.3V supply 1.8V, 2.5V and 3.3V supply
More informationFAST CMOS 16-BIT BIDIRECTIONAL 3.3V TO 5V TRANSLATOR
FAST CMOS 16-BIT BIDIRECTIONAL 3. TO 5V TRANSLATOR FAST CMOS 16-BIT BIDIRECTIONAL 3. TO 5V TRANSLATOR IDT74FCT164245T FEATURES: 0.5 MICRON CMOS Technology Bidirectional interface between 3. and 5V buses
More informationFAST CMOS OCTAL LATCHED TRANSCEIVER
FAST CMOS OCTAL LATCHED TRANSCEIVER IDT74FCT543AT/CT FEATURES: A and C grades Low input and output leakage 1µA (max.) CMOS power levels True TTL input and output compatibility: VOH = 3. (typ.) VOL = 0.
More information3.3V CMOS 16-BIT BIDIRECTIONAL TRANSCEIVER
3. CMOS 16-BIT BIDIRECTIONAL TRANSCEIVER 3. CMOS 16-BIT BIDIRECTIONAL TRANSCEIVER IDT74FCT163245A/C FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883,
More informationIDT74FCT163373A/C 3.3V CMOS 16-BIT TRANSPARENT LATCH
3. CMOS 16-BIT TRANSPARENT LATCH 3. CMOS 16-BIT TRANSPARENT LATCH IDT74FCT163373A/C FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20
More informationPI3C V/3.3V, High Bandwidth, Hot Insertion 8-Bit, 2-Port, Bus Switch. Description. Features. Pin Configuration. Block Diagram.
Features Near-Zero propagation delay 5-ohm switches connect inputs to outputs High Bandwidth Operation (>400 MHz) Permits Hot Insertion 5V I/O Tolerant Rail-to-Rail 3.3V or 2.5V Switching 2.5V Supply Voltage
More informationIDT54/74FCT16374AT/CT/ET
FAST CMOS 16-BIT REGISTER (3-STATE) IDT54/74FCT16374AT/CT/ET FEATURES: 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tsk(o) (Output Skew) < 250ps Low input
More informationIDT74FCT2374AT/CT FAST CMOS OCTAL D REGISTER (3-STATE)
IT74FCT2374AT/CT FAST CMOS OCTAL REGISTER (3-STATE) FAST CMOS OCTAL REGISTER (3-STATE) INUSTRIAL TEMPERATURE RANGE IT74FCT2374AT/CT FEATURES: A and C grades Low input and output leakage 1µA (max.) CMOS
More information3.3V CMOS 16-BIT EDGE TRIGGERED D-TYPE FLIP- FLOP WITH 3-STATE OUTPUTS, 5 VOLT TOLERANT I/O, BUS-HOLD
3.3V CMOS 16-BIT EDGE TRIGGERED D-TYPE FLIP- FLOP WITH 3-STATE OUTPUTS, 5 T TOLERANT I/O, BUS-HOLD IDT74LVCH162374A FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015;
More informationPI5C16861 PI5C (25Ω) 20-Bit, 2-Port Bus Switch
PI5C8 PI5C28 (25Ω) Features Near-Zero propagation delay 5Ω or 25Ω switches connect inputs to outputs Direct bus connection when switches are ON 32X384 function with flow through pinout make board layout
More informationPI3VeDP212 2-lane DisplayPort Switch/Mux for DP Driven Panels with Triple Control Pins
Features 2 Differential Channel, 2:1 mux/demux that will support 2.7Gbps or 1.62Gbps DP signals 1-differential channel is used for AUX signaling Insertion Loss for high speed channels @ 2.7 Gbps: -1.5dB
More informationIDT74ALVC V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS IDT74ALVC16245 FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine
More information3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS, 5 VOLT TOLERANT I/O
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS, 5 T TOLERANT I/O IDT74LVC16245A FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C
More informationFAST CMOS OCTAL BIDIRECTIONAL TRANSCEIVER
IDT74FCT2245T/CT FST CMOS OCTL BIDIRECTIONL TRNSCEIVER FST CMOS OCTL BIDIRECTIONL TRNSCEIVER INDUSTRIL TEMPERTURE RNGE IDT74FCT2245T/CT FETURES: and C grades Low input and output leakage 1μ (max.) CMOS
More informationORDERING INFORMATION PACKAGE
Operates From.65 V to 3.6 V Inputs Accept Voltages to 5.5 V Max t pd of 4.8 ns at 3.3 V Typical V OLP (Output Ground Bounce) 2
More informationPI3L V Quad, 2:1 Mux/DeMux Fast Ethernet LAN Switch w/ Single Enable. Description. Features. Applications. Pin Configuration.
Features R ON is 4Ω typical Low crosstalk: 27dB @ 250 MHz Near-Zero propagation delay: 250ps Switching speed: 9ns Channel On capacitance: 9pF (typical) Operating Range: +3.0V to +3.6V >2kV ESD protection
More information3.3V CMOS 16-BIT TRANS- PARENT D-TYPE LATCH WITH 3-STATE OUTPUTS AND BUS-HOLD
3.3V CMOS 16-BIT TRANS- PARENT D-TYPE LATCH WITH 3-STATE OUTPUTS AND BUS-HOLD IDT74ALVCH162373 FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method
More informationIDT54/74FCT16240AT/CT/ET
FAST CMOS 16-BIT BUFFER/LINE DRIVER IDT54/74FCT16240AT/CT/ET FEATURES: 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tsk(o) (Output Skew) < 250ps Low input
More information3.3V CMOS 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS AND 5 VOLT TOLERANT I/O
3.3V CMOS 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS AND 5 T TOLERANT I/O IDT74LVC16373A FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine
More informationSN5414, SN54LS14, SN7414, SN74LS14 HEX SCHMITT-TRIGGER INVERTERS
Operation From Very Slow Edges Improved Line-Receiving Characteristics High Noise Immunity SN5414, SN54LS14, SN5414, SN54LS14...J OR W PACKAGE SN7414... D, N, OR NS PACKAGE SN74LS14... D, DB, OR N PACKAGE
More informationPI5C3384 PI5C3384C PI5C32384 (25Ω)
PI5C3384 PI5C3384C PI5C32384 (25Ω) 0-Bit, 2-Port Bus Switch Features: Near-Zero propagation delay Low noise, 25Ω version (PI5C32384) 5Ω switches connect inputs to outputs (PI5C3384) Direct bus connection
More informationFAST CMOS 16-BIT REGISTER (3-STATE)
FAST CMOS 16-BIT REGISTER (3-STATE) IDT54/74FCT16374T/AT/CT/ET IDT54/74FCT162374T/AT/CT/ET Integrated Device Technology, Inc. FEATURES: Common features: 0.5 MICRON CMOS Technology High-speed, low-power
More information3.3V CMOS IDT74LVCH16244A 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS, 5 VOLT TOLERANT I/O AND BUS-HOLD FEATURES: DESCRIPTION: DRIVE FEATURES:
3.3V CMOS IDT74LVCH16244A 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS, 5 T TOLERANT I/O AND BUS-HOLD FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine
More informationPI2PCIE V, PCI Express Gen2 Compliant, 4-Differential Channel, 2:1 Mux/DeMux Switch
Features 4 Differential Channel, 2:1 Mux/DeMux PCI Express, Gen 2 Performance, 5.0Gbps Low Bit-to-Bit Skew, 7ps max (between '+' and '-' bits) Low Crosstalk: -23dB@3 GHz Low Off Isolation: -23dB@3 GHz
More informationPI3V514. Low On-Resistance, 3.3V High-Bandwidth 5-port, 4:1 Mux/DeMux VideoSwitch. Description. Features. Pin Configuration.
Features Near-Zero propagation delay 5Ω switches connect inputs to outputs High signal passing bandwidth (400 MHz) Beyond Rail-to-Rail switching 5V I/O tolerant with 3.3V supply 2.5V and 3.3V supply voltage
More information3.3V CMOS 16-BIT 2DIR 1OE 36
3.3V CMOS 16-BIT IDT74LVCHR162245A BUS TRANSCEIVER WITH 3 STATE OUTPUTS, 5 T TOLERANT I/O, BUS-HOLD FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine
More informationFAST CMOS 20-BIT BUFFERS
FAST CMOS 20-BIT BUFFERS IDT54/74FCT16827AT/BT/CT/ET IDT54/74FCT162827AT/BT/CT/ET Integrated Device Technology, Inc. FEATURES: Common features: 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement
More informationMC3486 QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUTS
Meets or Exceeds the Requirements of ANSI Standards EIA/TIA-422-B and EIA/TIA-423-B and ITU Recommendations V.10 and V.11 3-State, TTL-Compatible s Fast Transition Times Operates From Single 5-V Supply
More informationSN54LS373, SN54LS374, SN54S373, SN54S374, SN74LS373, SN74LS374, SN74S373, SN74S374 OCTAL D-TYPE TRANSPARENT LATCHES AND EDGE-TRIGGERED FLIP-FLOPS
SN54LS373, SN54LS374, SN54S373, SN54S374, Choice of Eight Latches or Eight D-Type Flip-Flops in a Single Package 3-State Bus-Driving s Full Parallel Access for Loading Buffered Control s Clock-Enable Has
More informationCD74HCT4514, CD74HCT LINE TO 16-LINE DECODERS/DEMULTIPLEXERS WITH INPUT LATCHES
4.5-V to 5.5-V V CC Operation Fanout (Over Temperature Range) Standard s... 0 LSTTL Loads Bus-Driver s... 5 LSTTL Loads Wide Operating Temperature Range of 55 C to 25 C Balanced Propagation Delays and
More informationSN54ALS273, SN74ALS273 OCTAL D-TYPE FLIP-FLOPS WITH CLEAR SDAS218A APRIL 1982 REVISED DECEMBER 1994
WITH CLEA SDAS2A APIL 2 EVISED DECEMBE 4 Contain Eight Flip-Flops With Single-ail Outputs Buffered Clock and Direct-Clear Inputs Individual Data Input to Each Flip-Flop Applications Include: Buffer/Storage
More information3.3V CMOS 16-BIT DESCRIPTION: 2DIR 1OE 36
3.3V CMOS 16-BIT IDT74LVCH16245A BUS TRANSCEIVER WITH 3-STATE OUTPUTS, 5 T TOLERANT I/O AND BUS-HOLD FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine
More informationSN54LS245, SN74LS245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
3-State s Drive Bus Lines Directly PNP s Reduce dc Loading on Bus Lines Hysteresis at Bus s Improves Noise Margins Typical Propagation Delay Times Port to Port, 8 ns TYPE IOL (SINK CURRENT) IOH (SOURCE
More informationDescription D2+A D2-A D3+A D3-A D0+B D0-B D1+B D1-B D2+B D2-B D3+B D3-B AUX+ A AUX- A HPD A CAB_DETA/LEDA AUX+ B AUX- B HPD B CAB_DETB/LEDB
High Bandwidth 6-differential Channel, 1:2 Demux Features 4 Differential Channel, 1:2 DeMux that will support 2.7Gbps DP rev 1.1a signals 1-channel 1:2 demux for DP_HPD signal 1-differential channel 1:2
More informationSN54AS825A, SN74AS825A 8-BIT BUS-INTERFACE FLIP-FLOPS WITH 3-STATE OUTPUTS SDAS020B JUNE 1984 REVISED AUGUST 1995
Functionally Equivalent to AMD s AM2982 Improved I OH Specificatio Multiple Output Enables Allow Multiuser Control of the Interface Outputs Have Undershoot-Protection Circuitry Power-Up High-Impedance
More informationFAST CMOS BUFFER/CLOCK DRIVER
FAST CMOS BUFFER/CLOCK DRIVER IDT49FCT80BT/CT FEATURES: 0. MICRON CMOS Technology Guaranteed low skew < 00ps (max.) Very low duty cycle distortion < 600ps (max.) Low CMOS power levels TTL compatible inputs
More informationIDT54/74FCT162244T/AT/CT/ET
FAST CMOS 16-BIT BUFFER/LINE DRIVER IDT54/74FCT162244T/AT/CT/ET FEATURES: 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tsk(o) (Output Skew) < 250ps Low input
More informationHigh Speed, 3.3 V/5 V Quad 2:1 Mux/Demux (4-Bit, 1 of 2) Bus Switch ADG3257
High Speed, 3.3 V/5 V Quad 2:1 Mux/Demux (4-Bit, 1 of 2) Bus Switch ADG3257 FEATURES 100 ps propagation delay through the switch 2 Ω switches connect inputs to outputs Data rates up to 933 Mbps Single
More information74LVT245BB. Pin Assignments. Description NEW PRODUCT. Applications. Features 3.3 V OCTAL BUS TRANSCEIVER WITH 3 STATE OUTPUTS 74LVT245BB
3.3 V OCTAL BUS TRANSCEIVER WITH 3 STATE OUTPUTS Description Pin Assignments The is an octal transceiver designed for asynchronous communication between data buses. The device transmits data from the A
More informationCDC337 CLOCK DRIVER WITH 3-STATE OUTPUTS
Low Output Skew, Low Pulse Skew for Clock-Distribution and Clock-Generation Applications TTL-Compatible Inputs and CMOS-Compatible Outputs Distributes One Clock Input to Eight Outputs Four Same-Frequency
More information3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 5 VOLT TOLERANT I/O AND BUS-HOLD
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 5 T TOLERANT I/O AND BUS-HOLD IDT74LVCH162245A FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C =
More information74AC374 74ACT374 Octal D-Type Flip-Flop with 3-STATE Outputs
74AC374 74ACT374 Octal D-Type Flip-Flop with 3-STATE Outputs General Description The AC/ACT374 is a high-speed, low-power octal D-type flip-flop featuring separate D-type inputs for each flip-flop and
More information74AC574 74ACT574 Octal D-Type Flip-Flop with 3-STATE Outputs
Octal D-Type Flip-Flop with 3-STATE Outputs General Description The AC/ACT574 is a high-speed, low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The
More informationPI5C3253. Dual 4:1 Mux/DeMux Bus Switch
Features Near-Zero propagation delay 5Ω switches connect inputs to outputs Direct bus connection when switches are ON ESD Protection up to 2kV HBM Ultra Low Quiescent Power (0.2μA typical) Ideally suited
More informationFAST CMOS BUFFER CLOCK/DRIVER
FAST CMOS BUFFER CLOCK/DRIVER IDT49FCT806BT/CT FEATURES: 0. MICRON CMOS Technology Guaranteed low skew < 00ps (max.) Very low duty cycle distortion < 600ps (max.) Low CMOS power levels TTL compatible inputs
More informationPI2PCIE2422. PCI Express Gen II Compliant, 8-Differential Channel Switch with 8:4 Mux/DeMux Option. Features. Description. Truth Table.
Features 8 Differential Channel SPST switch with Mux/DeMux option PCI Express Gen II performance Low Bit-to-Bit Skew: 10ps (between +/- signals) Low Crosstalk: -15dB @ 3.0 GHz Low Off Isolation: -26db
More informationPI3CH360 3-Channel 2:1 Mux/DeMux, Enable Low 1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug
1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug Features Near-Zero propagation delay 5-ohm switches connect inputs to outputs High signal passing bandwidth (500 MHz) Beyond Rail-to-Rail switching - 0 to 5V switching
More informationdescription V CC 2CLR 2D 2CLK 2PRE 2Q 2Q 1CLR 1D 1CLK 1PRE 1Q 1Q GND 2CLR 1CLR 1CLK NC 1PRE NC 1Q 2CLK 2PRE GND
Package Optio Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs TYPE TYPICAL MAXIMUM CLOCK FREUEY (CL = 0 pf) (MHz) TYPICAL POWER
More information1 OE 1D 2D 2Q 3Q 3D 4D 4Q GND 10
OCTAL D-TYPE FLIP-FLOP WITH 3 STATE OUTPUTS Description The provides eight edge-triggered D-type flip-flops featuring 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance
More informationFXL4T245 Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs
Low Voltage Dual Supply 4-Bit Signal Tralator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs General Description The FXL4T245 is a configurable dual-voltage-supply tralator designed
More informationSN54ALS74A, SN54AS74A, SN74ALS74A, SN74AS74A DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH CLEAR AND PRESET
Package Optio Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs TYPE TYPICAL MAXIMUM CLOCK FREUEY (CL = 0 pf) (MHz) TYPICAL POWER
More informationDescription IA 3 IA 2 IA 1 GND. Truth Table (1) H X X Hi-Z Disable S 0-1. L L L I0 S1-0 = 0 L L H I1 S1-0 = 1 Y A to Y B
Features Near-Zero propagation delay 5Ω switches connect inputs to outputs High signal passing bandwidth (300MHz) Beyond Rail-to-Rail switching 5V I/O tolerant with 3.3V supply 2.5V and 3.3V supply voltage
More information74AC821 74ACT Bit D-Type Flip-Flop with 3-STATE Outputs
74AC821 74ACT821 10-Bit D-Type Flip-Flop with 3-STATE Outputs General Description The AC/ACT821 is a 10-bit D-type flip-flop with 3-STATE outputs arranged in a broadside pinout. Ordering Code: Features
More informationSN54HCT373, SN74HCT373 OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS
Inputs Are TTL-Voltage Compatible Eight High-Current Latches in a Single Package High-Current -State True s Can Drive up to LSTTL Loads Full Parallel Access for Loading Package Optio Include Plastic Small-Outline
More informationPI5C Bit, 2-Port Bus Switch. Features. Description. Pin Configuration. Block Diagram. Pin Description. Truth Table (1) Pin Name Description
Features ÎÎNear-Zero propagation delay ÎÎ5-ohm switches connect inputs to outputs ÎÎDirect bus connection when switches are on ÎÎUltra Low Quiescent Power (0.2μA typical) Ideally suited for notebook applications
More information74AC574 74ACT574 Octal D-Type Flip-Flop with 3-STATE Outputs
Octal D-Type Flip-Flop with 3-STATE Outputs General Description The AC/ACT574 is a high-speed, low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The
More informationSN54LS06, SN74LS06, SN74LS16 HEX INVERTER BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS
Convert TTL Voltage Levels to MOS Levels High Sink-Current Capability Clamping Diodes Simplify System Design Open-Collector Driver for Indicator Lamps and Relays s Fully Compatible With Most TTL Circuits
More informationPI74LPT V, 16-Bit Buffer/Line Driver. Features. Description. Block Diagram
Features Compatible with LCX and LVT families of products Supports 5V Tolerant Mixed Signal Mode Operation Input can be 3V or 5V Output can be 3V or connected to 5V bus Advanced Low Power CMOS Operation
More informationPI3VDP Lane DisplayPort Rev 1.2 Compliant Switch. Description. Features. Application. Block Diagram
Features ÎÎ2-lane, 1:2 mux/demux that will support RBR, HBR1, or HBR2 ÎÎ1-channel 1:2 mux/demux for DP_HPD signal ÎÎ1-differential channel 1:2 mux/demux for DP_Aux signal with support up to 720Mbps ÎÎInsertion
More informationUNISONIC TECHNOLOGIES CO., LTD U74HCT245
UNISONIC TECHNOLOGIES CO., LTD U74HCT245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS DIP-20 DESCRIPTION The U74HCT245 is designed for the asynchronous communication between data buses. While the direction-control(dir)
More informationSN54ALS688, SN74ALS688 8-BIT IDENTITY COMPARATORS
Compare Two -Bit Words Totem-Pole Outputs () ALS Are Identical to ALS2 Package Options Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J)
More informationPI3HDMI412-B. 4-Differential Channel, 2:1 Mux/DeMux, DVI/HDMI Compliant Signal Switch based on TMDS Signaling Standard
Compliant Signal Switch based on TMDS Signaling Standard Features 3.3V 4-Differential Channel 2:1 Mux/DeMux DVI, HDMI, 1.2 +1.2 signal compatible Data Rate: 1.65Gbps Supports both AC coupled and DC coupled
More informationSN54ALS873B, SN54AS873A, SN74ALS873B, SN74AS873A DUAL 4-BIT D-TYPE LATCHES WITH 3-STATE OUTPUTS SDAS036D APRIL 1982 REVISED AUGUST 1995
3-State Buffer-Type Outputs Drive Bus Lines Directly Bus-Structured Pinout Package Optio Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Plastic (NT) and Ceramic (JT) DIPs
More informationSN54LS07, SN74LS07, SN74LS17 HEX BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS
Convert TTL Voltage Levels to MOS Levels High Sink-Current Capability Clamping Diodes Simplify System Design Open-Collector Driver for Indicator Lamps and Relays description These hex buffers/drivers feature
More informationSN54ALS00A, SN54AS00, SN74ALS00A, SN74AS00 QUADRUPLE 2-INPUT POSITIVE-NAND GATES
Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description These devices contain four independent 2-input positive-nand
More informationAM26LS31 QUADRUPLE DIFFERENTIAL LINE DRIVER
AM6LS SLLSG JANUARY 979 REVISED FEBRUARY Meets or Exceeds the Requirements of ANSI TIA/EIA--B and ITU Recommendation V. Operates From a Single -V Supply TTL Compatible Complementary Outputs High Output
More informationSN54ALS873B, SN54AS873A, SN74ALS873B, SN74AS873A DUAL 4-BIT D-TYPE LATCHES WITH 3-STATE OUTPUTS SDAS036D APRIL 1982 REVISED AUGUST 1995
3-State Buffer-Type Outputs Drive Bus Lines Directly Bus-Structured Pinout Package Optio Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK), and Plastic (NT) and Ceramic (JT) DIPs
More informationBIDIRECTIONAL TRANSCEIVER
IDT/FCTT/T/CT FST CMOS OCTL BIDIRECTIONL TRNSCEIVER FST CMOS OCTL BIDIRECTIONL TRNSCEIVER MILITRY ND INDUSTRIL TEMPERTURE RNGES IDT/FCTT/T/CT FETURES: Std.,, and C grades Low input and output leakage µ
More informationFST3253 Dual 4:1 Multiplexer/Demultiplexer Bus Switch
Dual 4:1 Multiplexer/Demultiplexer Bus Switch General Description The Fairchild Switch FST3253 is a dual 4:1 high-speed CMOS TTL-compatible multiplexer/demultiplexer bus switch. The low on resistance of
More informationPI3C3126. Description. Features. 14-Pin Configuration. Applications. Block Diagram. 16-Pin Configuration. Truth Table (1) Pin Description.
2./3.3, High Bandwidth, Hot Insertion,4-Bit, 2-Port Bus Switch with Individual Enables Features Near-Zero propagation delay -ohm switches connect inputs to outputs High Bandwidth (>400 MHz) 2./3.3 Supply
More information3.3V CMOS 1-TO-10 CLOCK DRIVER
3. CMOS 1-TO-10 CLOCK DRIVER 3. CMOS 1-TO-10 CLOCK DRIVER IDT74/A FEATURES: 0.5 MICRON CMOS Technology Guaranteed low skew < 350ps (max.) Very low duty cycle distortion < 350ps (max.) High speed: propagation
More informationPI3CH200 2-Bit Bus Switch, Enable Low 1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug
2-Bit Bus Switch, Enable Low 1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug Features Near-Zero propagation delay 5-ohm switches connect inputs to outputs High signal passing bandwidth (500 MHz) Beyond Rail-to-Rail
More informationPI5C3253. Dual 4:1 Mux/DeMux Bus Switch
Features Near-Zero propagation delay 5Ω switches connect inputs to outputs Direct bus connection when switches are ON Ultra Low Quiescent Power (0.2µA typical) Ideally suited for notebook applications
More information74AC573 74ACT573 Octal Latch with 3-STATE Outputs
74AC573 74ACT573 Octal Latch with 3-STATE Outputs General Description The 74AC573 and 74ACT573 are high-speed octal latches with buffered common Latch Enable (LE) and buffered common Output Enable (OE)
More informationPI3CH Bit Bus Switch, Enable Low 1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug
1.8V/2.5V/3.3V, High-Bandwidth, Hot Plug Features Description Near-Zero propagation delay 5-ohm switches connect inputs to outputs High signal passing bandwidth (500 MHz) Beyond Rail-to-Rail switching
More informationICS Low Skew PCI / PCI-X Buffer. General Description. Block Diagram. Pin Configuration. Pin Descriptions OE CLK0
Low Skew PCI / PCI-X Buffer General Description The ICS9112-27 is a high performance, low skew, low jitter PCI / PCI-X clock driver. It is designed to distribute high speed signals in PCI / PCI-X applications
More informationP54FCT373/74fct373 OCTAL TRANSPARENT LATCH WITH 3-STATE OUTPUTS FEATURES DESCRIPTION. Function, Pinout and Drive Compatible with the FCT and F Logic
P54FCT373/74fct373 OCTAL TRANSPARENT LATCH WITH 3-STATE OUTPUTS FEATURES Function, Pinout and Drive Compatible with the FCT and F Logic FCT-A speed at 5.6ns max (MIL) Output levels compatible with TTL
More informationSN54ALS08, SN54AS08, SN74ALS08, SN74AS08 QUADRUPLE 2-INPUT POSITIVE-AND GATES
SNALS0, SNAS0, SN7ALS0, SN7AS0 Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 00-mil DIPs description These devices contain
More information