QUICKSWITCH PRODUCTS HIGH-PERFORMANCE CMOS TWO CHANNEL 4PST SWITCH
|
|
|
- Bethanie McDowell
- 6 years ago
- Views:
Transcription
1 QUICKSWITCH PRODUCTS HIGH-PERFORMANCE CMOS TWO CHANNEL PST SWITCH IDTQSA5 FEATURES: Low ON resistance: rds(on) = 5Ω Wide bandwidth:.3ghz (-3dB point) : db at 5KHz, -7dB at 5MHz, -5dB at 3MHz Off-isolation: -9dB at 5KHz, -db at 5MHz, -55dB at 3MHz Single supply Bidirectional signal flow TTL-compatible control inputs Ultra-low quiescent current: 3μA Switch turn on time of.5ns Available in QSOP package APPLICATIONS: High-speed video signal switching/routing HDTV-quality video signal routing Audio signal switching/routing Data acquisition ATE systems Telecomm routing Token Ring transceivers High-speed networking DESCRIPTION: The QSA5 is a high-performance CMOS two-channel PST switch with 3-state outputs. The low ON resistance of the QSA5 allows inputs to be connected to outputs with low insertion loss and high bandwidth. The QSA5, with.3ghz bandwidth, is ideal for high-performance video signal switching, audio signal switching, and telecomm routing applications. Low power dissipation makes this device ideal for battery operated and remote instrumentation applications. The QSA5 is offered in the QSOP package which has several advantages over conventional packages such as PDIP and SOIC, including: Reduced signal delays due to denser component packaging on circuit boards Reduced system noise due to less pin inductance The QSA5 is characterized for operation at - C to +85 C. FUNCTIONAL BLOCK DIAGRAM A A A3 A C C3 C B B B3 B D D D3 D CONTROL LOGIC The IDT logo is a registered trademark of Integrated Device Technology, Inc. APRIL c Integrated Device Technology, Inc. DSC-5555/3
2 PIN CONFIGURATION ABSOLUTE MAXIMUM RATINGS () Symbol Description Max Unit VTERM () Supply Voltage to Ground.5 to +7 V A D A VCC B VTERM (3) DC Switch Voltage VS to +7 V Analog Input Voltage to +7 V VTERM (3) DC Input Voltage VIN to +7 V VAC AC Input Voltage (pulse width ns) 3 V IOUT DC Output Current ma PMAX Maximum Power Dissipation.7 W D3 A3 D A D C B3 C3 B C B TSTG Storage Temperature 5 to +5 C. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.. VCC terminals. 3. All terminals except VCC. QSOP TOP VIEW PIN DESCRIPTION Pin Names I/O Description Ax, Bx I/O Ports A, B Cx, Dx I/O Ports C, D - I Enable FUNCTION TABLE () Ax, Cx I/Os Bx, Dx I/Os H H Disconnected Disconnected L H Ax = Cx Disconnected H L Disconnected Bx = Dx L L Ax = Cx Bx = Dx. H = HIGH Voltage Level L = LOW Voltage Level
3 DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE Following Conditions Apply Unless Otherwise Specified: Industrial: TA = C to +85 C, VCC = ± 5% Symbol Parameter Test Conditions Min. Typ. () Max. Unit Analog Switch VIN Analog Signal Range () - V rds(on) Drain-source ON resistance (,3) = Min., VIN = V, ION = 3mA 5 7 Ω = Min., VIN =.V, ION = 5mA 3 7 IC(OFF) Channel Off Leakage Current Ax, Bx = or V, Cx, Dx = V or, E = na IC(ON) Channel On Leakage Current Ax = Bx = Cx = Dx = V na (each channel is turned on sequentially) Digital Control VIH Input HIGH Voltage Guaranteed Logic HIGH for Control Pins V VIL Input LOW Voltage Guaranteed Logic LOW for Control Pins.8 V Dynamic Characteristics ton(e) Enable Turn-On Time RL = KΩ, CL = pf.5.5 ns E to Ax, Bx, Cx, or Dx (See Switching Time) toff(e) Enable Turn-Off Time RL = KΩ, CL = pf.5 ns E to Ax, Bx, Cx, or Dx (See Switching Time) tpd Group Delay (,a) RL = KΩ, CL = pf 5 ps f3db -3dB Bandwidth VIN = to V, Vp-p, RL = 75Ω.3 GHz Off-isolation VIN = to V, Vp-p, RL = 75Ω, f = 5.5MHz - db XTALK VIN = Vp-p, RL = 75Ω, f = 5.5MHz -7 db C(OFF) Mux Off Capacitance E =, VIN = = V 5 pf C(ON) Mux On Capacitance E = V, VIN = = V pf QCI Charge Injection CL = pf.5 pc. Typical values are at VCC = 5.V, TA = 5 C.. Max value is guaranteed but not production tested. 3. Measured by voltage drop between A and C pins or B and D pins at indicated current through the switch. ON resistance is determined by the lower of the voltages on the two (A, C, or B, D) pins.. The bus switch contributes no group delay other than the RC delay of the ON resistance of the switch and load capacitance. Group delay of the bus switch, when used in a system, is determined by the driving circuit on the driving side of the switch and its interaction with the load on the driven side. POWER SUPPLY CHARACTERISTICS Symbol Parameter Test Conditions Max. Unit ICC Supply Current VCC = Max., VIN = or VCC 3 μa 3
4 TYPICAL CHARACTERISTICS 8 5 VCC = R L = 75Ω 5 VCC = RL = 75Ω 9 3 Off-isolation Off-isolation 3 K K K M M M G G M M 3M M 5M M 7M Off-isolation and vs. Frequency. = log VO/VS. Off-isolation = log VO/VS. = log VO/VS. Off-isolation = log VO/VS Off-isolation and vs. Frequency VCC = R L = 75Ω 8 Off-isolation VCC = R L = 75Ω K K. = log VO/VS. Off-isolation = log VO/VS 3K K 5K K Off-isolation and vs. Frequency 7K K K K M M M G G. Insertion Loss = log VO/VS Insertion Loss vs. Frequency
5 TYPICAL CHARACTERISTICS (CONTINUED) 8 3 M VCC = RL = 75Ω 5M M 7M 8M 9M G r DS (On) - Drain Source On-resistance(Ω ) 8 VCC =.7. Insertion Loss = log VO/VS Insertion Loss vs. Frequency VIN (Volts) RON LINK On-Resistance vs. VIN TEST CIRCUITS A-A3 -C3 CONTROL INPUT 3.V. V VIN QSA5 A OUTPUT toff(e).3v 5Ω C CONTROL INPUT ton(e) 3.V. V 5Ω 5 pf OUTPUT.3V Switching Time 5
6 TEST CIRCUITS (CONTINUED) VS A QSA5 C RL 75Ω VS A B QSA5 RL 75Ω Insertion Loss. Insertion Loss = log VO/VS. All unused pins are grounded.. = log VO/VS. All unused pins are grounded. VS A RL 75Ω QSA5 Off-Isolation. Off-isolation = log VO/VS
7 ORDERING INFORMATION QS XXXXX XX Device Type Package X Blank 8 Tube or Tray Tape and Reel QG Quarter Size Outline Package - QSOP Green A5 High Performance CMOS Two Channel PST Switch DATASHEET DOCUMENT HISTORY /3/ Pg. 7 Updated the Ordering Information by removing non green package version and Adding Tape and Reel information. CORPORATE HEADQUARTERS for SALES: for Tech Support: Silver Creek Valley Road or logichelp@idt.com San Jose, CA 9538 fax:
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH 16:8 MULTIPLEXER
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH 16:8 MULTIPLEXER IDTQS32390 FEATURES: Enhanced N channel FET with no inherent diode to Vcc 16:8 multiplexer function with zero delay 5Ω bidirectional switches
QUICKSWITCH PRODUCTS HIGH-SPEED 32-BIT BUS EXCHANGE SWITCH IN MILLIPAQ
QUICKSWITCH PRODUCTS HIGH-SPEED 3-BIT BUS EXCHANGE SWITCH IN MILLIPAQ IDTQS3X33 FEATURES: 5Ω switches connect inputs to outputs Zero propagation delay Direct bus connect Live insertion capability Low power
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH 8-BIT BUS SWITCH
FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs Pin compatible with the 74F245, 74FCT245, and 74FCT245T Low power CMOS proprietary technology
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH DUAL 4:1 MUX/DEMUX
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH DUAL :1 MUX/DEMUX IDTQS353 FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs Pin compatible
FAST CMOS 8-BIT IDENTITY COMPARATOR
FAST CMOS 8-BIT IDENTITY COMPARATOR IDT74FCT521AT/CT FEATURES: A and C grades Low input and output leakage 1µA (max.) CMOS power levels True TTL input and output compatibility: VOH = 3. (typ.) VOL = 0.
FAST CMOS OCTAL LATCHED TRANSCEIVER
FAST CMOS OCTAL LATCHED TRANSCEIVER IDT74FCT543AT/CT FEATURES: A and C grades Low input and output leakage 1µA (max.) CMOS power levels True TTL input and output compatibility: VOH = 3. (typ.) VOL = 0.
FAST CMOS 16-BIT BIDIRECTIONAL 3.3V TO 5V TRANSLATOR
FAST CMOS 16-BIT BIDIRECTIONAL 3. TO 5V TRANSLATOR FAST CMOS 16-BIT BIDIRECTIONAL 3. TO 5V TRANSLATOR IDT74FCT164245T FEATURES: 0.5 MICRON CMOS Technology Bidirectional interface between 3. and 5V buses
IDT74FCT257AT/CT/DT FAST CMOS QUAD 2-INPUT MULTIPLEXER
FAST CMOS QUAD 2-INPUT MULTIPLEXER IDT74FCT257AT/CT/DT FEATURES: A, C, and D grades Low input and output leakage 1µA (max.) CMOS power levels True TTL input and output compatibility: VOH = 3. (typ.) VOL
LOW-VOLTAGE QUADRUPLE BUS SWITCH 11 4B
LOW-VOLTAGE QUADRUPLE BUS ITCH IDT7CBTLV6 FEATURES: Pin-out compatible with standard '6 Logic products Ω A/B bi-directional switch Isolation under power-off conditions Over-voltage tolerant Latch-up performance
QUICKSWITCH BASICS AND APPLICATIONS
QUICKSWITCH GENERAL INFORMATION QUICKSWITCH BASICS AND APPLICATIONS INTRODUCTION The QuickSwitch family of FET switches was pioneered in 1990 to offer designers products for high-speed bus connection and
LOW-VOLTAGE 16-BIT BUS SWITCH
LOW-VOLTAGE 16-BIT BUS ITCH IDT74CBTLV1645 FEATURES: 5Ω A/B bi-directional switch Isolation Under Power-Off Conditions Over-voltage tolerant Latch-up performance exceeds 100mA =.3V - 3.6V, normal range
CMOS Static RAM 1 Meg (128K x 8-Bit) IDT71024S
CMOS Static RAM 1 Meg (128K x 8-Bit) IDT71024S Features 128K x 8 advanced high-speed CMOS static RAM Commercial (0 C to +70 C), Industrial ( 40 C to +85 C) Equal access and cycle times Commercial and Industrial:
3.3V CMOS 1-TO-10 CLOCK DRIVER
3. CMOS 1-TO-10 CLOCK DRIVER 3. CMOS 1-TO-10 CLOCK DRIVER IDT74/A FEATURES: 0.5 MICRON CMOS Technology Guaranteed low skew < 350ps (max.) Very low duty cycle distortion < 350ps (max.) High speed: propagation
3.3V ZERO DELAY CLOCK BUFFER, SPREAD SPECTRUM COMPATIBLE
3.3V ZERO DELAY CLOCK BUFFER, SPREAD SPECTRUM COMPATIBLE IDT23S05 FEATURES: Phase-Lock Loop Clock Distribution 10MHz to 133MHz operating frequency Distributes one clock input to one bank of five outputs
FAST CMOS OCTAL BIDIRECTIONAL TRANSCEIVER
IDT74FCT2245T/CT FST CMOS OCTL BIDIRECTIONL TRNSCEIVER FST CMOS OCTL BIDIRECTIONL TRNSCEIVER INDUSTRIL TEMPERTURE RNGE IDT74FCT2245T/CT FETURES: and C grades Low input and output leakage 1μ (max.) CMOS
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS, 5 VOLT TOLERANT I/O
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS, 5 T TOLERANT I/O IDT74LVC16245A FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C
3.3V CMOS 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS AND 5 VOLT TOLERANT I/O
3.3V CMOS 16-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS AND 5 T TOLERANT I/O IDT74LVC16373A FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine
3.3V CMOS 16-BIT 2DIR 1OE 36
3.3V CMOS 16-BIT IDT74LVCHR162245A BUS TRANSCEIVER WITH 3 STATE OUTPUTS, 5 T TOLERANT I/O, BUS-HOLD FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine
3.3V CMOS 20-BIT BUFFER
3. CMOS 20-BIT BUFFER 3. CMOS 20-BIT BUFFER IDT74FCT163827A/C FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model
FAST CMOS 16-BIT REGISTER (3-STATE)
FAST CMOS 16-BIT REGISTER (3-STATE) IDT74FCT16374AT/CT/ET FEATURES: 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tsk(o) (Output Skew) < 250ps Low input and
3.3V CMOS 16-BIT DESCRIPTION: 2DIR 1OE 36
3.3V CMOS 16-BIT IDT74LVCH16245A BUS TRANSCEIVER WITH 3-STATE OUTPUTS, 5 T TOLERANT I/O AND BUS-HOLD FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine
3.3V CMOS 16-BIT REGISTER (3-STATE)
3. CMOS 16-BIT REGISTER (3-STATE) 3. CMOS 16-BIT REGISTER (3-STATE) IDT74FCT163374A/C FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; >
IDT74FCT540AT/CT FAST CMOS OCTAL BUFFER/LINE DRIVER DESCRIPTION: FUNCTIONAL BLOCK DIAGRAM FEATURES:
FAST CMOS OCTAL BUFFER/LINE DRIVER IDT74FCT540AT/CT FEATURES: Low input and output leakage 1µ A (max.) CMOS power levels True TTL input and output compatibility VOH = 3. (typ.) VOL = 0. (typ.) Meets or
BCT MHz DPDT Analog Switch for USB2.0 Hi-Speed
BCT4227 700MHz DPDT Analog Switch for USB2.0 Hi-Speed Features VCC Operating Range: 1.65V to V Rail-to-Rail Signal Range ON-Resistance Matching: 0.05 Ω (TYP) ON-Resistance Flatness: 0.08Ω (TYP) High Off
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 5 VOLT TOLERANT I/O AND BUS-HOLD
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 5 T TOLERANT I/O AND BUS-HOLD IDT74LVCH162245A FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C =
IDT54/74FCT162244T/AT/CT/ET
FAST CMOS 16-BIT BUFFER/LINE DRIVER IDT54/74FCT162244T/AT/CT/ET FEATURES: 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tsk(o) (Output Skew) < 250ps Low input
FAST CMOS BUFFER/CLOCK DRIVER
FAST CMOS BUFFER/CLOCK DRIVER IDT49FCT80BT/CT FEATURES: 0. MICRON CMOS Technology Guaranteed low skew < 00ps (max.) Very low duty cycle distortion < 600ps (max.) Low CMOS power levels TTL compatible inputs
IDT74FCT2374AT/CT FAST CMOS OCTAL D REGISTER (3-STATE)
IT74FCT2374AT/CT FAST CMOS OCTAL REGISTER (3-STATE) FAST CMOS OCTAL REGISTER (3-STATE) INUSTRIAL TEMPERATURE RANGE IT74FCT2374AT/CT FEATURES: A and C grades Low input and output leakage 1µA (max.) CMOS
3.3V CMOS IDT74LVCH16244A 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS, 5 VOLT TOLERANT I/O AND BUS-HOLD FEATURES: DESCRIPTION: DRIVE FEATURES:
3.3V CMOS IDT74LVCH16244A 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS, 5 T TOLERANT I/O AND BUS-HOLD FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine
IDT74ALVC V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS
3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS IDT74ALVC16245 FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine
IDT54/74FCT16374AT/CT/ET
FAST CMOS 16-BIT REGISTER (3-STATE) IDT54/74FCT16374AT/CT/ET FEATURES: 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tsk(o) (Output Skew) < 250ps Low input
IDT74FCT163373A/C 3.3V CMOS 16-BIT TRANSPARENT LATCH
3. CMOS 16-BIT TRANSPARENT LATCH 3. CMOS 16-BIT TRANSPARENT LATCH IDT74FCT163373A/C FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20
3.3V CMOS 16-BIT EDGE TRIGGERED D-TYPE FLIP- FLOP WITH 3-STATE OUTPUTS, 5 VOLT TOLERANT I/O, BUS-HOLD
3.3V CMOS 16-BIT EDGE TRIGGERED D-TYPE FLIP- FLOP WITH 3-STATE OUTPUTS, 5 T TOLERANT I/O, BUS-HOLD IDT74LVCH162374A FEATURES: Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015;
PI5A391 PI5A393A. Precision Wide Bandwidth Quad Analog Switches. Description. Features
2345678923456789234567892234567892345678923456789223456789234567892345678922345678923456789234567892234567892 Features Single-Supply Operation (+2V to +6V) Rail-to-Rail Analog Signal Range Low On-Resistance
3.3V CMOS 16-BIT TRANS- PARENT D-TYPE LATCH WITH 3-STATE OUTPUTS AND BUS-HOLD
3.3V CMOS 16-BIT TRANS- PARENT D-TYPE LATCH WITH 3-STATE OUTPUTS AND BUS-HOLD IDT74ALVCH162373 FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method
IDT CMOS Static RAM 1 Meg (256K x 4-Bit)
CMOS Static RAM 1 Meg (256K x 4-Bit) IDT71028 Features 256K x 4 advanced high-speed CMOS static RAM Equal access and cycle times Commercial and Industrial: 12/15/20ns One Chip Select plus one Output Enable
3.3V ZERO DELAY CLOCK BUFFER
3.3V ZERO DELAY CLOCK BUFFER IDT2309 FEATURES: Phase-Lock Loop Clock Distribution 10MHz to 1 operating frequency Distributes one clock input to one bank of five and one bankd of four outputs Separate output
3.3V CMOS 16-BIT BIDIRECTIONAL TRANSCEIVER
3. CMOS 16-BIT BIDIRECTIONAL TRANSCEIVER 3. CMOS 16-BIT BIDIRECTIONAL TRANSCEIVER IDT74FCT163245A/C FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883,
CMOS 16-BIT 3.3V TO 5V LEVEL SHIFTING TRANSCEIVER WITH 3-STATE OUTPUTS 2DIR 48 1OE. 3.3V Port. 5V Port
FEATURES: 0.5 MICRON CMOS Technology Typical tsk(o) (Output Skew) < 250ps ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C = 200pF, R = 0) VCCA = 2.7V to 3.6V VCCB = 5V ± 0.5V CMOS power
3.3V ZERO DELAY CLOCK MULTIPLIER
3.3V ZERO DELAY CLOCK MULTIPLIER FEATURES: Phase-Lock Loop Clock Distribution for Applications ranging from 10MHz to 1 operating frequency Distributes one clock input to two banks of four outputs Separate
3.3V CMOS Static RAM 1 Meg (64K x 16-Bit) Description OBSOLESCENCE ORDER 71V016SA. Row / Column Decoders. Sense Amps and Write Drivers
3.3V CMOS Static RAM 1 Meg (4K x 1-Bit) IDT71V1 Features 4K x 1 advanced high-speed CMOS Static RAM Commercial ( to +7 C) and Industrial ( 4 C to +5 C) Equal access and cycle times Commercial and Industrial:
WAS4799Q WAS4799Q. Order information. Low On Resistance, Quad SPDT Analog Switch. Http//:
WAS4799Q Low On Resistance, Quad SPDT Analog Switch Descriptions The WAS4799Q is a high performance, quad, Single Pole Double Throw (SPDT) analog switch that features ultra-low Ron of 0.5 Ω (typical) at
BCT4222B 350MHz DPDT Analog Switch
BCT4222B 350MHz DPDT Analog Switch Features VCC Operating Range: 1.65V to V Rail-to-Rail Signal Range ON-Resistance Matching: 0.04 Ω (TYP) ON-Resistance Flatness: 0.08Ω (TYP) High Off Isolation: 58dB at
Quad, Wide-Bandwidth SPDT Video Analog Switch
GERAL DESCRIPTION The is a Quad, bidirectional, single-pole/doublethrow (SPDT) CMOS Video analog switches (Mux/DeMux) designed to operate at a single +5V supply. This 2-channel multiplexer/demultiplexer
FAST CMOS BUFFER CLOCK/DRIVER
FAST CMOS BUFFER CLOCK/DRIVER IDT49FCT806BT/CT FEATURES: 0. MICRON CMOS Technology Guaranteed low skew < 00ps (max.) Very low duty cycle distortion < 600ps (max.) Low CMOS power levels TTL compatible inputs
High Speed, 3.3 V/5 V Quad 2:1 Mux/Demux (4-Bit, 1 of 2) Bus Switch ADG3257
High Speed, 3.3 V/5 V Quad 2:1 Mux/Demux (4-Bit, 1 of 2) Bus Switch ADG3257 FEATURES 100 ps propagation delay through the switch 2 Ω switches connect inputs to outputs Data rates up to 933 Mbps Single
Features. Applications
DATASHEET IDTHS221P10 Description The IDTHS221P10 is a high-performance hybrid switch device, combined with hybrid low distortion audio and USB 2.0 high speed data (480 Mbps) signal switches, and analog
3.3V ZERO DELAY CLOCK MULTIPLIER
3.3V ZERO DELAY CLOCK MULTIPLIER IDT2308 FEATURES: Phase-Lock Loop Clock Distribution for Applications ranging from 10MHz to 1 operating frequency Distributes one clock input to two banks of four outputs
BIDIRECTIONAL TRANSCEIVER
IDT/FCTT/T/CT FST CMOS OCTL BIDIRECTIONL TRNSCEIVER FST CMOS OCTL BIDIRECTIONL TRNSCEIVER MILITRY ND INDUSTRIL TEMPERTURE RNGES IDT/FCTT/T/CT FETURES: Std.,, and C grades Low input and output leakage µ
1 pc Charge Injection, 100 pa Leakage, CMOS, ±5 V/+5 V/+3 V Dual SPDT Switch ADG636
pc Charge Injection, pa Leakage, CMOS, ±5 V/+5 V/+3 V Dual SPDT Switch ADG636 FEATURES pc charge injection ±2.7 V to ±5.5 V dual supply +2.7 V to +5.5 V single supply Automotive temperature range: 4 C
IDT71V424S/YS/VS IDT71V424L/YL/VL
.V CMOS Static RAM Meg (K x -Bit) IDT1V2S/YS/VS IDT1V2L/YL/VL Features K x advanced high-speed CMOS Static RAM JEDEC Center Power / GND pinout for reduced noise Equal access and cycle times Commercial
BCT4221 High-Speed & Low-Ron DPDT Analog Switch
BCT4221 High-Speed & Low-Ron DPDT Analog Switch General Description The BCT4221 double-pole double-throw (DPDT) analog switch multiplexes Hi-speed (480MHz) USB and audio analog signals. One Channel has
FAST CMOS 1-TO-10 CLOCK DRIVER
Integrated Device Technology, Inc. FAST CMOS 1-TO-10 CLOCK DRIVER IDT54/74FCT807BT/CT FEATURES: 0.5 MICRON CMOS Technology Guaranteed low skew < 250ps (max.) Very low duty cycle distortion < 350ps (max.)
PI3C V/3.3V, High Bandwidth, Hot Insertion 10-Bit, 2-Port, Bus Switch
2.5V/3., High Bandwidth, Hot Insertion Features Near-Zero propagation delay 5-ohm switches connect inputs to outputs High Bandwidth (>400 MHz) Permits Hot Insertion. Rail-to-Rail, 3. or 2.5V ing 5V I/O
2.5 V/3.3 V, 2:1 Multiplexer/ Demultiplexer Bus Switch ADG3248
2. V/3.3 V, 2:1 Multiplexer/ Demultiplexer Bus Switch FEATURES 22 ps propagation delay through the switch 4. Ω switch connection between ports Data rate 1.244 Gbps 2. V/3.3 V supply operation Level translation
HIGH-PERFORMANCE CMOS BUS TRANSCEIVERS
Integrated Device Technology, Inc. HIGH-PERFORMAE CMOS BUS TRANSCEIVERS IDT54/74FCT86A/B IDT54/74FCT863A/B FEATURES: Equivalent to AMD s Am2986-64 bipolar registers in pinout/function, speed and output
Quad SPDT ±15 V/+12 V Switches ADG1334
Quad SPT ±15 V/+12 witches AG1334 FEATURES 33 V supply range 13 Ω on resistance Fully specified at ±15 V/+12 V 3 V logic compatible inputs Rail-to-rail operation Break-before-make switching action 2-lead
0.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854
.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854 FEATURES.8 Ω typical on resistance Less than 1 Ω maximum on resistance at 85 C 1.8 V to 5.5 V single supply High current carrying capability:
TIME SLOT INTERCHANGE DIGITAL SWITCH 256 x 256
TIME SLOT INTERCHANGE DIGITAL SWITCH IDT728980 FEATURES: channel non-blocking switch Serial Telecom Bus Compatible (ST-BUS ) 8 RX inputs 32 channels at 64 Kbit/s per serial line 8 TX output 32 channels
1.3 Ω CMOS, 1.8 V to 5.5 V Single SPDT Switch/2:1 MUX in SOT-66 Package ADG859
1.3 Ω CMOS, 1.8 V to 5.5 ingle SPT Switch/2:1 MUX in SOT-66 Package AG859 FEATURES 1.8 V to 5.5 V single supply Tiny 1.65 mm 1.65 mm package Low on resistance: 1.3 Ω at 5 V supply High current-carrying
Low Voltage, 400 MHz, Quad 2:1 Mux with 3 ns Switching Time ADG774A
Low Voltage, 4 MHz, Quad 2:1 Mux with 3 ns Switching Time FEATURES Bandwidth: >4 MHz Low insertion loss and on resistance: 2.2 Ω typical On resistance flatness:.3 Ω typical Single 3 V/5 V supply operation
CMOS STATIC RAM 1 MEG (128K x 8-BIT)
CMOS STATIC RAM 1 MEG (12K x -BIT) IDT71024 Integrated Device Technology, Inc. FEATURES: 12K x advanced high-speed CMOS static RAM Commercial (0 to 70 C), Industrial (-40 to 5 C) and Military (-55 to 125
ADG1606/ADG Ω RON, 16-Channel, Differential 8-Channel, ±5 V,+12 V,+5 V, and +3.3 V Multiplexers FEATURES FUNCTIONAL BLOCK DIAGRAMS
4.5 Ω RON, 6-Channel, Differential 8-Channel, ±5 V,+2 V,+5 V, and +3.3 V Multiplexers ADG66/ADG67 FEATURES 4.5 Ω typical on resistance. Ω on resistance flatness ±3.3 V to ±8 V dual supply operation 3.3
IDT54/74FCT16240AT/CT/ET
FAST CMOS 16-BIT BUFFER/LINE DRIVER IDT54/74FCT16240AT/CT/ET FEATURES: 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement for ABT functions Typical tsk(o) (Output Skew) < 250ps Low input
MAX V Capable, Low-R ON, Beyond-the-Rails DPDT Analog Switch
Click here for production status of specific part numbers. MAX2327 12V Capable, Low-R ON, General Description The MAX2327 ultra-small, low-on-resistance (R ON ) double-pole/double-throw (DPDT) analog switches
3 V/5 V CMOS 0.5 Ω SPDT/2:1 Mux in SC70 ADG849
3 V/5 V CMOS.5 Ω SPT/2: Mux in SC7 AG849 FEATURES Ultralow on-resistance:.5 Ω typical.8 Ω maximum at 5 V supply Excellent audio performance, ultralow distortion:.3 Ω typical.24 Ω maximum RON flatness High
0.35 Ω CMOS 1.65 V to 3.6 V Single SPDT Switch/2:1 MUX ADG839
.35 Ω CMOS 1.65 V to 3.6 V Single SPT Switch/2:1 MUX AG839 FEATURES 1.65 V to 3.6 V operation Ultralow on resistance:.35 Ω typical.5 Ω max at 2.7 V supply Excellent audio performance, ultralow distortion:.55
PI3C V/3.3V, High Bandwidth, Hot Insertion 8-Bit, 2-Port, Bus Switch. Description. Features. Pin Configuration. Block Diagram.
Features Near-Zero propagation delay 5-ohm switches connect inputs to outputs High Bandwidth Operation (>400 MHz) Permits Hot Insertion 5V I/O Tolerant Rail-to-Rail 3.3V or 2.5V Switching 2.5V Supply Voltage
CMOS 3 V/5 V, Wide Bandwidth Quad 2:1 Mux ADG774
a FEATURES Low Insertion Loss and On Resistance: 2.2 Typical On Resistance Flatness.5 Typical Automotive Temperature Range 4 C to +125 C 3 db Bandwidth = 24 MHz Single 3 V/5 upply Operation Rail-to-Rail
Ultra-Small, Low-RON, Beyond-the-Rails DPDT Analog Switches
EVALUATION KIT AVAILABLE MAX14689 General Description The MAX14689 ultra-small, low-on-resistance (R ON ) double-pole/double-throw (DPDT) analog switches feature Beyond-the-Rails capability that allows
CMOS 1.8 V to 5.5 V, 2.5 Ω 2:1 Mux/SPDT Switch in SOT-23 ADG719-EP
CMOS 1.8 V to 5.5 V, 2.5 Ω 2:1 Mux/SPT Switch in SOT-23 AG719-EP FEATURES 1.8 V to 5.5 V single supply 4 Ω (max) on resistance.75 Ω (typ) on resistance flatness 3 db bandwidth > 2 MHz Rail-to-rail operation
PI5A23159 Low Voltage Dual SPDT 0.8Ω Analog Switch
Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 0.8 at 3.0V Wide Range: 1.65V to 5.5V Rail-to-Rail Signal Range Control Overvoltage Tolerance: 5.5V(Min) Fast Transition Speed:
PI5V330A. Low On-Resistance Wideband/Video Quad 2-Channel Mux/DeMux. Features: Description. Pin Diagram. Block Diagram. Pin Description.
Features: High-performance solution to switch between video sources Wide bandwidth: >360 MHz Low On-Resistance: 3Ω Low crosstalk at 0 MHz: 58dB Ultra-low quiescent power (0.µA typical) Single supply operation:
BCT4699ETE. Applications. Ordering Information. December, 2013, REV1.1
BCT4699 General Description The BCT4699 is configured as a quad-spdt switch with two common control inputs. Each digital input controls two pairs of SPDT switches. The switches are fully bi-directional,
3.3V CMOS Static RAM 4 Meg (256K x 16-Bit)
3.3V CMOS Static RAM Meg (2K x 1-Bit) IDT71V1S IDT71V1L Features 2K x 1 advanced high-speed CMOS Static RAM JEDEC Center Power / GND pinout for reduced noise. Equal access and cycle times Commercial and
0.5 Ω CMOS 1.65 V to 3.6 V Dual SPDT/2:1 MUX ADG836L
.5 Ω CMOS 1.65 V to 3.6 V ual SPT/2:1 MUX AG836L FEATURES.5 Ω typical on resistance.8 Ω maximum on resistance at 125 C 1.65 V to 3.6 V operation Automotive temperature range: 4 C to +125 C Guaranteed leakage
PI5V330S. Low On-Resistance Wideband/Video Quad 2-Channel Mux/DeMux. Features. Description. Block Diagram. Pin Configuration.
Features High-performance solution to switch between video sources Wide bandwidth: 570 MHz (typical) Low On-Resistance: 5Ω (typical) Low crosstalk at 10 MHz: 80dB Ultra-low quiescent power (0.1µA typical)
Low Capacitance, Low Charge Injection, ±15 V/+12 V icmos Dual SPST Switches ADG1221/ADG1222/ADG1223
Data Sheet Low Capacitance, Low Charge Injection, ±15 V/+12 V icmos Dual SPST Switches ADG1221/ADG1222/ADG1223 FEATURES
IDT71V016SA/HSA. 3.3V CMOS Static RAM 1 Meg (64K x 16-Bit)
.V CMOS Static RAM 1 Meg (4K x 1-Bit) IDT71V1SA/HSA Features 4K x 1 advanced high-speed CMOS Static RAM Equal access and cycle times Commercial: 1//1/2 Industrial: /1/2 One Chip Select plus one Output
PI3C3126. Description. Features. 14-Pin Configuration. Applications. Block Diagram. 16-Pin Configuration. Truth Table (1) Pin Description.
2./3.3, High Bandwidth, Hot Insertion,4-Bit, 2-Port Bus Switch with Individual Enables Features Near-Zero propagation delay -ohm switches connect inputs to outputs High Bandwidth (>400 MHz) 2./3.3 Supply
1.5 Ω On Resistance, ±15 V/12 V/±5 V, icmos, Dual SPDT Switch ADG1436
Data Sheet.5 Ω On Resistance, ±5 V/2 V/±5 V, icmos, Dual SPDT Switch ADG436 FEATURES.5 Ω on resistance.3 Ω on-resistance flatness. Ω on-resistance match between channels Continuous current per channel
LC 2 MOS 5 Ω RON SPST Switches ADG451/ADG452/ADG453
LC 2 MOS 5 Ω RON SPST Switches ADG45/ADG452/ADG453 FEATURES Low on resistance (4 Ω) On resistance flatness (0.2 Ω) 44 V supply maximum ratings ±5 V analog signal range Fully specified at ±5 V, 2 V, ±5
CMOS, 1.8 V to 5.5 V/±2.5 V, 3 Ω Low Voltage 4-/8-Channel Multiplexers ADG708/ADG709
CMOS,.8 V to 5.5 V/±2.5 V, 3 Ω Low Voltage 4-/8-Channel Multiplexers AG78/AG79 FEATURES.8 V to 5.5 V single supply ±2.5 V dual supply 3 Ω on resistance.75 Ω on resistance flatness pa leakage currents 4
Low Voltage, 300 MHz Quad 2:1 Mux Analog HDTV Audio/Video Switch ADG794
Low Voltage, 300 MHz Quad 2: Mux Analog HDTV Audio/Video Switch FEATURES Bandwidth: 300 MHz Low insertion loss and on resistance: 5 Ω typical On-resistance flatness: 0.7 Ω typical Single 3.3 V/5 V supply
FSAV430 Low Voltage 1.1GHz, 4-Channel, 2:1 Video Switch
FSAV430 Low Voltage 1.1GHz, 4-Channel, 2:1 Video Switch Features -40dB Off Isolation at 30MHz -60dB Non-Adjacent Channel Crosstalk at 30MHz 3dB Bandwidth: 1.1GHz On Resistance: 4.5 (Typical) Low Power
CMOS StaticRAM 16K (4K x 4-BIT) CACHE-TAG RAM
Integrated Device Technology, Inc. CMOS StaticRAM 16K (4K x 4-BIT) CACHE-TAG RAM IDT6178S FEATURES: High-speed Address to Valid time Military: 12/15/20/25ns Commercial: 10/12/15/20/25ns (max.) High-speed
Features. Applications
PRELIMINARY DATASHEET IDTHS421V16 Description The IDTHS421V16 is a bi-directional, low power, Quad single-pole, double-throw (SPDT) hybrid switch targeted at dual SIM card multiplexing. It is optimized
FAST CMOS 16-BIT REGISTER (3-STATE)
FAST CMOS 16-BIT REGISTER (3-STATE) IDT54/74FCT16374T/AT/CT/ET IDT54/74FCT162374T/AT/CT/ET Integrated Device Technology, Inc. FEATURES: Common features: 0.5 MICRON CMOS Technology High-speed, low-power
SGM4684 Chip Scale Packaging, Low-Voltage 0.4Ω, Dual, SPDT Analog Switch
GENERAL DESCRIPTION The SGM4684 is a dual, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single 1.8V to 5.5V power supply.
0.5 Ω CMOS 1.65 V to 3.6 V Dual SPDT/2:1 Mux in Mini LFCSP Package ADG824
ata Sheet.5 Ω CMOS.65 V to 3.6 V ual SPT/2: Mux in Mini LFCSP Package FEATURES.5 Ω typical on resistance.85 Ω maximum on resistance at 85 C.65 V to 3.6 V operation High current carrying capability: 3 ma
FST Bit Low Power Bus Switch
FST3384 10-Bit Low Power Bus Switch General Description The Fairchild Switch FST3384 provides 10 bits of highspeed CMOS TTL-compatible bus switches. The low on resistance of the switch allows inputs to
CMOS, ±5 V/+5 V, 4 Ω, Single SPDT Switches ADG619/ADG620
CMOS, ± V/+ V, 4 Ω, Single SPDT Switches ADG619/ADG62 FEATURES 6. Ω (maximum) on resistance.8 Ω (maximum) on-resistance flatness 2.7 V to. V single supply ±2.7 V to ±. V dual supply Rail-to-rail operation
1 Ω Typical On Resistance, ±5 V, +12 V, +5 V, and +3.3 V Dual SPDT Switches ADG1636
FEATURES Ω typical on resistance.2 Ω on resistance flatness ±3.3 V to ±8 V dual supply operation 3.3 V to 6 V single supply operation No VL supply required 3 V logic-compatible inputs Rail-to-rail operation
PI5A4684. Chip Scale Packaging, Dual SPDT Analog Switch. Features. Description. Pin Configuration/ Block Diagram (top view) CSP.
Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 0.5Ω. Wide Range: 1.65V to 5.5V Rail-to-Rail Signal Range Control Input Overvoltage Tolerance: 5.5V min. High Off Isolation:
Low Capacitance, Low Charge Injection, ±15 V/+12 V icmos SPST in SOT-23 ADG1201/ADG1202
Low Capacitance, Low Charge Injection, ±15 V/+12 V icmo PT in OT-23 AG121/AG122 FEATURE 2.4 pf off capacitance
SGM48754 Quad SPST CMOS Analog Switch
GENERAL DESCRIPTION The is a CMOS analog switch configured as quad SPST. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail analog signals. The off-leakage
Description. Features. Application. Pin Assignment. Pin Description. Logic Function Table PI5A3158B
Low oltage Dual SPDT Analog Switch 2:1 Mux/Demux Bus Switch Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 8Ω at 3.0 Wide Range: 1.65 to 5.5 Rail-to-Rail Signal Range Control
FAST CMOS 20-BIT BUFFERS
FAST CMOS 20-BIT BUFFERS IDT54/74FCT16827AT/BT/CT/ET IDT54/74FCT162827AT/BT/CT/ET Integrated Device Technology, Inc. FEATURES: Common features: 0.5 MICRON CMOS Technology High-speed, low-power CMOS replacement
0.8Ω, Low-Voltage, 4-Channel Analog Multiplexer
General Description The is a low on-resistance, low-voltage, 4-channel CMOS analog multiplexer that operates from a single 1.6V to 3.6V supply. This device has fast switching speeds (t ON = 25ns, t OFF