Quad, Wide-Bandwidth SPDT Video Analog Switch

Size: px
Start display at page:

Download "Quad, Wide-Bandwidth SPDT Video Analog Switch"

Transcription

1 GERAL DESCRIPTION The is a Quad, bidirectional, single-pole/doublethrow (SPDT) CMOS Video analog switches (Mux/DeMux) designed to operate at a single +5V supply. This 2-channel multiplexer/demultiplexer is recommended for both RGB and composite video switching applications. The Video Switch can be driven from a current output RAMDAC or voltage output composite video source. Wide bandwidth (500MHz), low On-Resistance (6Ω), and low crosstalk make it suitable for high-frequency and other applications. Also this device has exceptionally high current capability which is far greater than most analog switches offered today. Quad, Wide-Bandwidth SPDT Video Analog Switch FEATURES Wide Bandwidth: 500 MHz Low On-Resistance: 6Ω(TYP) Low Crosstalk: 10MHz(TYP) Single Power Operation: +5V Fast Switching Time Rail-to-Rail Operation Typical Power Consumption (0.1 µw) TTL/CMOS Compatible Micro size Package SO-16 TSSOP-16 QSOP-16 The offers a high-performance, low-cost solution to switch between video sources. It is specified 40 C to +85 C temperature range. The has lead (Pb) free SOIC-16, TSSOP-16 and QSOP-16 packages. P CONFIGURATIONS(TOP VIEW) APPLICATIONS Personal Video Recorders Terrestrial Set-Top Boxes Hard Disk Recorders DVD Players Game Consoles Digital VCRs Desktop Video Editors Audio and Video Switching S 1 A S 2 A D A S 1 B S 2 B V+ S 1 D S 2 D D D S 1 C D B 7 10 S 2 C GND 8 9 D C QSOP-16/SO-16/TSSOP-16 Shengbang Microelectronics Co, Ltd Tel: 86/451/ Rev. A

2 ORDERG FORMATION ORDERG NUMBER P- PACKAGE SPECIFIED TEMPERATURE RANGE PACKAGE MARKG PACKAGE OPTION -YS/TR SO C to +85 C -YS Tape and Reel, YTS/TR TSSOP C to +85 C -YTS Tape and Reel, YQS/TR QSOP C to +85 C -YQS Tape and Reel, 3000 ABSOLUTE MAXIMUM RATGS Supply Voltage to Ground Potential ( Inputs & V + only ) V to +6V Supply Voltage to Ground Potential ( Ouputs & D only ) V to +6V DC Input Voltage V to +6V DC Output Current mA Operating Temperature Range C to +85 C Junction Temperature C Storage Temperature C to +150 C Package Thermal TA = 25 SO-16, θja /W TSSOP-16, θja /W QSOP-16, θja /W Lead Temperature ( soldering, 10s ) C ESD Susceptibility HBM V MM V Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. BLOCK DIAGRAM(positive logic) P DESCRIPTION D A D B D C D D S 1 A S 2 A S 1B S 2B S 1C S 2C S 1 D S 2 D NAME S1A, S1B, S1C, S1D S2A, S2B, S2C, S2D DA, DB, DC, DD FUNCTION Analog video I/O Select input Switch-enable input Analog video I/O DECODER/DRIVERS GND Ground 15 1 V+ Power supply FUNCTION TABLE ON Switch 0 0 S1A, S1B, S1C, S1D 0 1 S2A, S2B, S2C, S2D 1 X Disabled Notes: S1 is normally connected when is ʺ0ʺ. 2

3 ELECTRICAL CHARACTERISTICS (Over the Operating Range, V + = +5 V ± 10%, T A = - 40 C to +85 C.) PARAMETER SYMBOL CONDITIONS M TYP(1) MAX UNITS DC CHARACTERISTICS Analog Signal Range VANALOG V On-Resistance RON V+ = 4.5V, VI = 1.0V, RL = 75Ω, ION = 13mA 6 9 Ω V+ = 4.5V, VI = 2.0V, RL = 75Ω, ION = 26mA 7 10 Ω Input High Voltage VIH Guaranteed Logic HIGH Level 2.0 V Input Low Voltage VIL Guaranteed Logic LOW Level V Input High Current IIH V+ = 5.5V, V = V+ ±1 µa Input Low Current IIL V+ = 5.5V, V = GND ±1 µa Analog Output Leakage Current IO 0 S1, S2, or D V+, Switch OFF ±1 µa Short Circuit Current IOS 230 ma Clamp Diode Voltage VIK VCC = 4.5V, I = -18mA V Input Hysteresis at Control Pins VH 200 mv DYNAMIC CHARACTERISTICS Turn-On Time TON RL = 70Ω, CL = 20pF( Figure 1) ns Turn-Off Time TOFF RL = 70Ω, CL = 20pF( Figure 1) 4 7 ns Off Isolation OIRR RL = 150Ω, f = 10MHz( Figure 5) -55 db Channel-to-Channel Crosstalk XTALK R = 10Ω, RL = 150Ω, f = 10MHz( Figure 4) -60 db Bandwidth 3 db BW RL = 150Ω( Figure 3) 500 MHz Input/Enable Capacitance C V = 0V, f = 1MHz 5 pf Switch OFF Capacitance COFF V = 0V, f = 1MHz 5 pf Switch ON Capacitance CON V = 0V, f = 1MHz 8 pf Differential Gain DG RL = 150Ω, f = 3.58MHz( Figure 2) 0.51 % Differential Phase DP RL = 150Ω, f = 3.58MHz( Figure 2) 0.01 POWER REQUIREMTS Quiescent Power Supply Current ICC V+ = +5.5V, = GND or 5V µa Supply Current per TTL HIGH ICC V+ = +5.5V, = 3.4V 300 ua Supply Current per Input per MHz ICCD V+ = +5.5V,, S1, S2 and D Pins Open = GND Control Input Toggling 50% Duty Cycle 0.1 ma/ MHz Specifications subject to change without notice. Notes: 1. Typical values are at VCC = 5.0V, TA = 25 C ambient and maximum loading. 3

4 PARAMETER DEFITIONS PARAMETER RON IO V VI V C COFF CON VIH VIL IIH (IIL) IOS TON TOFF BW XTALK DG DP OIRR DESCRIPTION Resistance between source and drain with switch in the ON state Output leakage current measured at S1, S2, and D with the switch OFF Digital voltage at the pin that selects between S1 and S2 analog inputs Voltage applied to the D or S1, S2 pins when D or S1, S2 is the switch input A voltage that ABLES the chip Capacitance at the digital inputs Capacitance at analog I/O (S1, S2, D) with switch OFF Capacitance at analog I/O (S1, S2, D) with switch ON Minimum input voltage for logic HIGH Minimum input voltage for logic LOW Input current of the digital input Minimum short circuit current for S1, S2 and D Propagation delay measured between 50% of the digital input to 90% of the analog output when switch is turned ON. The peak analog voltage is 0.714V Propagation delay measured between 50% of the digital input to 90% of the analog output when switch is turned OFF. The peak analog voltage is 0.714V response of the switch in the ON state measured at 3dB down Is an unwanted signal coupled from channel to channel. Measured in db. XTALK = 20 LOG VOUT/V. This is non-adjacent crosstalk Magnitude variation between analog input and output pins when the switch is ON and the dc offset of composite-video signal varies at the analog input pin. In the NTSC standard, the frequency of the video signal is 3.58 MHz, and dc offset is from 0 to V. Phase variation between analog input and output pins when the switch is ON and the dc offset of composite-video signal varies at the analog input pin. In the NTSC standard, the frequency of the video signal is 3.58 MHz, and dc offset is from 0 to V. Off isolation is the resistance (measured in db) between the input and output with the switch off (NO) CAUTION This integrated circuit can be damaged by ESD if you don t pay attention to ESD protection. Shengbang Micro-electronics recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. 4

5 TYPICAL PERFORMANCE CHARACTERISTICS On Response(dB) On Response vs.frequency V + = +5V T A = +25 Power Supply Current(µA) Power Supply Current vs.enable Voltage V + = +5V T A = Frequency(MHz) Enable Voltage(V) Crosstalk vs.frequency Off Isolation vs.frequency V + = +5V T A = V + = +5V T A = Crosstalk(dB) Off Isolation(dB) Frequency(MHz) Frequency(MHz) 5

6 TEST CIRCUITS V CC Input Generator V G1 50Ω V 50Ω S 1 DUT V S1 D V O S 2 C L (1) R L V S2 Test VCC RL CL VS1 VS2 TON TOFF 5V±0.5V GND 3V 5V±0.5V V GND 5V±0.5V GND 3V 5V±0.5V V GND Output Control (V ) 50% 50% 3V 0V Analog Ouput Waveform (V O ) t ON 90% 90% t OFF V OH 0V VOLTAGE WAVEFORMS T ON AND T OFF TIMES NOTES: 1. CL includes probe and jig capacitance. 2. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 Ω, tr 2.5 ns, tf 2.5 ns. 3. The outputs are measured one at a time, with one transition per measurement. Figure 1. Test Circuit for Voltage Waveform and Switch Time 6

7 TEST CIRCUITS(continued) EXT TRIGGER P2 R L = 150Ω S 1A Sawtooth Waveform Generator VBIAS BIAS Network Analyzer (HP8753ES) V CC DUT P1 D A V V Figure 2. Test Circuit for Differential Gain/Phase Measurement Differential gain and phase are measured at the output of the ON channel. For example, when V = 0, V = 0, and DA is the input, the output is measured at S1A. HP8753ES Setup Average = 20 RBW = 300 Hz ST = s P1 = 7 dbm CW frequency = 3.58 MHz Sawtooth Waveform Generator Setup VBIAS = 0 to 1 V Frequency = Hz 7

8 TEST CIRCUITS(continued) EXT TRIGGER P2 RL = 150Ω S1A VBIAS BIAS Network Analyzer (HP8753ES) VCC DUT P1 DA V V Figure3. Test Circuit for Frequency Response (BW) Frequency response is measured at the output of the ON channel. For example, when V = 0, V = 0, and DA is the input, the output is measured at S1A. All unused analog I/O ports are left open. HP8753ES Setup Average = 4 RBW = 3 Hz VBIAS = 0.35 V ST = 2 s P1 = 0 dbm 8

9 TEST CIRCUITS(continued) EXT TRIGGER V BIAS BIAS Network Analyzer (HP8753ES) P1 P2 V CC D A S 1 A R L = 150Ω 50Ω(1) V V DUT R = 10Ω D B S 1 B R L = 150Ω NOTES: (1) A 50Ω termination resistor is needed for the network analyzer. Figure 4. Test Circuit for Crosstalk (XTALK) Crosstalk is measured at the output of the nonadjacent ON channel. For example, when V = 0, V = 0, and DA is the input, the output is measured at S1B. All unused analog input (D) ports and output (S) ports are connected to GND through 10Ω and 50Ω pulldown resistors, respectively. HP8753ES Setup Average = 4 RBW = 3 khz VBIAS = 0.35 V ST = 2 s P1 = 0 dbm 9

10 TEST CIRCUITS(continued) V BIAS EXT TRIGGER BIAS P2 Network Analyzer (HP8753ES) R L = 150Ω V CC S 1 A DUT S 2 A R L = 150Ω 50Ω(1) P1 D A V V NOTES: (1) A 50Ω termination resistor is needed for the network analyzer. Figure 5. Test Circuit for Off Isolation (OIRR) Off isolation is measured at the output of the OFF channel. For example, when V = VCC, V = 0, and DA is the input, the output is measured at S1A. All unused analog input (D) ports are left open, and output (S) ports are connected to GND through 50Ω pulldown resistors. HP8753ES Setup Average = 4 RBW = 3 khz VBIAS = 0.35 V ST = 2 s P1 = 0 dbm 10

11 PACKAGE OUTLE DIMSIONS SO-16 E1 E A2 D e A1 A L C θ Symbol Dimensions In Millimeters Dimensions In Inches Min Max Min Max A A A b c D E E e (BSC) (BSC) L θ b 11

12 PACKAGE OUTLE DIMSIONS TSSOP-16 b A E1 P #1 IDT. E D e L C A2 A H θ A Symbol Dimensions In Millimeters Dimensions In Inches Min Max Min Max D E b c E A A A e 0.65 (BSC) (BSC) L H 0.25(TYP) 0.01(TYP) θ A1 12

13 PACKAGE OUTLE DIMSIONS QSOP-16 D P NO 1 A e E1 E A2 7 o 7 o±3 o L (0.010) A1 b ZD α DETAIL-A h x 45 o GAUGE PLANE DETAIL A Dimensions Symbol In Millimeters Min Max A A A b C D E E e BSC h L α 0 8 ZD REF C 13

SGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch

SGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch GERAL DESCRIPTION The SGM330A is a quad, bidirectional, single-pole/doublethrow (SPDT) CMOS video analog switch (Mux/DeMux) designed to operate at a single +5V supply. This 2-channel multiplexer/demultiplexer

More information

SGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch

SGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch GERAL DESCRIPTION The SGM330A is a quad, bidirectional, single-pole/ double-throw (SPDT) CMOS video analog switch (Mux/DeMux) designed to operate at a single +5V supply. This 2-channel multiplexer/demultiplexer

More information

SGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch

SGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch GENERAL DESCRIPTION The SGM330A is a quad, bidirectional, single-pole/ double-throw (SPDT) CMOS video analog switch (Mux/ DeMux) designed to operate from a single 2.7V to 5.5V power supply. This 2-channel

More information

PI5V330A. Low On-Resistance Wideband/Video Quad 2-Channel Mux/DeMux. Features: Description. Pin Diagram. Block Diagram. Pin Description.

PI5V330A. Low On-Resistance Wideband/Video Quad 2-Channel Mux/DeMux. Features: Description. Pin Diagram. Block Diagram. Pin Description. Features: High-performance solution to switch between video sources Wide bandwidth: >360 MHz Low On-Resistance: 3Ω Low crosstalk at 0 MHz: 58dB Ultra-low quiescent power (0.µA typical) Single supply operation:

More information

PI5V330S. Low On-Resistance Wideband/Video Quad 2-Channel Mux/DeMux. Features. Description. Block Diagram. Pin Configuration.

PI5V330S. Low On-Resistance Wideband/Video Quad 2-Channel Mux/DeMux. Features. Description. Block Diagram. Pin Configuration. Features High-performance solution to switch between video sources Wide bandwidth: 570 MHz (typical) Low On-Resistance: 5Ω (typical) Low crosstalk at 10 MHz: 80dB Ultra-low quiescent power (0.1µA typical)

More information

SGM MHz, Low Voltage SPDT Analog Switch in 6-pin SC70

SGM MHz, Low Voltage SPDT Analog Switch in 6-pin SC70 GENERAL DESCRIPTION The SGM3167 is a single, bidirectional, single-pole/ double-throw (SPDT) CMOS analog switches designed to operate from a single 1.8V to 5.5V supply. It features high-bandwidth (600MHz)

More information

SGM3003 Ultra Low ON-Resistance, Low Voltage, SPDT Analog Switch

SGM3003 Ultra Low ON-Resistance, Low Voltage, SPDT Analog Switch GENERAL DESCRIPTION The SGM3003 is a single, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single +1.8V to +5.5V supply. Targeted

More information

FEATURES GENERAL DESCRIPTION PIN CONFIGURATIONS(TOP VIEW) APPLICATIONS SGM4157YD6 FUNCTION TABLE PIN DESCRIPTION 6 IN GND 5 V+ COM DFN-6 REV.

FEATURES GENERAL DESCRIPTION PIN CONFIGURATIONS(TOP VIEW) APPLICATIONS SGM4157YD6 FUNCTION TABLE PIN DESCRIPTION 6 IN GND 5 V+ COM DFN-6 REV. SPDT 1Ω Analog Switch GENERAL DESCRIPTION The is a single Low ON-Resistance(1Ω), fast single-pole double-throw (SPDT) CMOS switch. It is designed for low operating voltage, high current switching of speaker

More information

SGM Ω Ultra Low ON-Resistance, Dual, SPDT Analog Switch

SGM Ω Ultra Low ON-Resistance, Dual, SPDT Analog Switch GENERAL DESCRIPTION The SGM2267 is a dual single-pole/double-throw (SPDT) analog switch that is designed to operate from a single +1.8V to +4.2V power supply. Targeted applications include battery powered

More information

Low Voltage, 400 MHz, Quad 2:1 Mux with 3 ns Switching Time ADG774A

Low Voltage, 400 MHz, Quad 2:1 Mux with 3 ns Switching Time ADG774A Data Sheet FEATURES Bandwidth: >4 MHz Low insertion loss and on resistance: 2.2 Ω typical On resistance flatness:.3 Ω typical Single 3 V/5 V supply operation Very low distortion:

More information

Low Voltage, 300 MHz Quad 2:1 Mux Analog HDTV Audio/Video Switch ADG794

Low Voltage, 300 MHz Quad 2:1 Mux Analog HDTV Audio/Video Switch ADG794 Low Voltage, 300 MHz Quad 2: Mux Analog HDTV Audio/Video Switch FEATURES Bandwidth: 300 MHz Low insertion loss and on resistance: 5 Ω typical On-resistance flatness: 0.7 Ω typical Single 3.3 V/5 V supply

More information

CMOS 3 V/5 V, Wide Bandwidth Quad 2:1 Mux ADG774

CMOS 3 V/5 V, Wide Bandwidth Quad 2:1 Mux ADG774 a FEATURES Low Insertion Loss and On Resistance: 2.2 Typical On Resistance Flatness.5 Typical Automotive Temperature Range 4 C to +125 C 3 db Bandwidth = 24 MHz Single 3 V/5 upply Operation Rail-to-Rail

More information

4Ω, High Speed, Low Voltage Dual, DPDT Analog Switch

4Ω, High Speed, Low Voltage Dual, DPDT Analog Switch GENERAL DESCRIPTION The is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power supply.

More information

SGM48754 Quad SPST CMOS Analog Switch

SGM48754 Quad SPST CMOS Analog Switch GENERAL DESCRIPTION The is a CMOS analog switch configured as quad SPST. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail analog signals. The off-leakage

More information

PI5A391 PI5A393A. Precision Wide Bandwidth Quad Analog Switches. Description. Features

PI5A391 PI5A393A. Precision Wide Bandwidth Quad Analog Switches. Description. Features 2345678923456789234567892234567892345678923456789223456789234567892345678922345678923456789234567892234567892 Features Single-Supply Operation (+2V to +6V) Rail-to-Rail Analog Signal Range Low On-Resistance

More information

BCT4222B 350MHz DPDT Analog Switch

BCT4222B 350MHz DPDT Analog Switch BCT4222B 350MHz DPDT Analog Switch Features VCC Operating Range: 1.65V to V Rail-to-Rail Signal Range ON-Resistance Matching: 0.04 Ω (TYP) ON-Resistance Flatness: 0.08Ω (TYP) High Off Isolation: 58dB at

More information

Low Voltage, 400 MHz, Quad 2:1 Mux with 3 ns Switching Time ADG774A

Low Voltage, 400 MHz, Quad 2:1 Mux with 3 ns Switching Time ADG774A Low Voltage, 4 MHz, Quad 2:1 Mux with 3 ns Switching Time FEATURES Bandwidth: >4 MHz Low insertion loss and on resistance: 2.2 Ω typical On resistance flatness:.3 Ω typical Single 3 V/5 V supply operation

More information

Low On-Resistance Wideband/Video Quad 2-Channel Mux/DeMux

Low On-Resistance Wideband/Video Quad 2-Channel Mux/DeMux DESCRIPTION The is a true bidirectional Quad 2-channel multiplexer/ de-multiplexer utilizing CMOS Technology. It is recommended for both RGB and composite video switching applications. The video switch

More information

SGM3717 4Ω, 400MHz Bandwidth, Dual, SPDT Negative Signal Handling Analog Switch

SGM3717 4Ω, 400MHz Bandwidth, Dual, SPDT Negative Signal Handling Analog Switch Preliminary datasheet SGM3717 GENERAL DESCRIPTION The SGM3717 is a dual, bidirectional, single-pole/ double-throw (SPDT) CMOS analog switch designed to operate from a single +2.5V to +5.0V supply. It features

More information

BCT MHz DPDT Analog Switch for USB2.0 Hi-Speed

BCT MHz DPDT Analog Switch for USB2.0 Hi-Speed BCT4227 700MHz DPDT Analog Switch for USB2.0 Hi-Speed Features VCC Operating Range: 1.65V to V Rail-to-Rail Signal Range ON-Resistance Matching: 0.05 Ω (TYP) ON-Resistance Flatness: 0.08Ω (TYP) High Off

More information

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch GENERAL DESCRIPTION The SGM4462 is a dual, high-speed, low-voltage, double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single 1.8V to 5.5V power supply. It features high-bandwidth

More information

SGM4684 Chip Scale Packaging, Low-Voltage 0.4Ω, Dual, SPDT Analog Switch

SGM4684 Chip Scale Packaging, Low-Voltage 0.4Ω, Dual, SPDT Analog Switch GENERAL DESCRIPTION The SGM4684 is a dual, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single 1.8V to 5.5V power supply.

More information

WAS4799Q WAS4799Q. Order information. Low On Resistance, Quad SPDT Analog Switch. Http//:

WAS4799Q WAS4799Q. Order information. Low On Resistance, Quad SPDT Analog Switch. Http//: WAS4799Q Low On Resistance, Quad SPDT Analog Switch Descriptions The WAS4799Q is a high performance, quad, Single Pole Double Throw (SPDT) analog switch that features ultra-low Ron of 0.5 Ω (typical) at

More information

SGM Ω, Low Voltage Quad, SPDT Analog Switch

SGM Ω, Low Voltage Quad, SPDT Analog Switch GENERAL DESCRIPTION The SGM3699 is a quad, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch that is designed to operate from a single 1.8V to 4.35V power

More information

UNISONIC TECHNOLOGIES CO., LTD US5V330 Preliminary CMOS IC

UNISONIC TECHNOLOGIES CO., LTD US5V330 Preliminary CMOS IC UNISONIC TECHNOLOGIES CO., LTD US5V330 Preliminary CMOS IC WIDEBAND/VIDEO QUAD 2-CHANNEL MUX/DEMUX WITH LOW ON-RESISTANCE DESCRIPTION The UTC s US5V330 video switch is a 4bit 2-channel multiplexer/demultiplexer

More information

0.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854

0.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854 .5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854 FEATURES.8 Ω typical on resistance Less than 1 Ω maximum on resistance at 85 C 1.8 V to 5.5 V single supply High current carrying capability:

More information

SGM9203 Triple, 6th-Order, Video Filter Driver for SD/PS/HD (1080i)/HD (1080p)

SGM9203 Triple, 6th-Order, Video Filter Driver for SD/PS/HD (1080i)/HD (1080p) SGM923 for SD/PS/HD (18i)/HD (18p) PRODUCT DESCRIPTION The SGM923 is a comprehensive filtering solution designed to give designers the flexibility to easily filter and drive various video signals, including

More information

WAS4899Q WAS4899Q. Descriptions. Features. Order information. Applications. Low On Resistance, Quad SPDT Analog Switch. Http//:

WAS4899Q WAS4899Q. Descriptions. Features. Order information. Applications. Low On Resistance, Quad SPDT Analog Switch. Http//: WAS4899Q Low On Resistance, Quad SPDT Analog Switch Http//:www.willsemi.com Descriptions The WAS4899Q is a high performance, quad, Single Pole Double Throw (SPDT) analog switch that features ultra-low

More information

ADG1606/ADG Ω RON, 16-Channel, Differential 8-Channel, ±5 V,+12 V,+5 V, and +3.3 V Multiplexers FEATURES FUNCTIONAL BLOCK DIAGRAMS

ADG1606/ADG Ω RON, 16-Channel, Differential 8-Channel, ±5 V,+12 V,+5 V, and +3.3 V Multiplexers FEATURES FUNCTIONAL BLOCK DIAGRAMS 4.5 Ω RON, 6-Channel, Differential 8-Channel, ±5 V,+2 V,+5 V, and +3.3 V Multiplexers ADG66/ADG67 FEATURES 4.5 Ω typical on resistance. Ω on resistance flatness ±3.3 V to ±8 V dual supply operation 3.3

More information

WAS4723Q WAS4723Q. Order information 1 2 VCC NO1. Low On Resistance, Dual SPDT Analog Switch. Http//: QFN L

WAS4723Q WAS4723Q. Order information 1 2 VCC NO1. Low On Resistance, Dual SPDT Analog Switch. Http//:  QFN L WAS4723Q Low On Resistance, Dual SPDT Analog Switch Http//:www.willsemi.com Descriptions The WAS4723Q is a high performance, dual Single Pole Double Throw (SPDT) analog switch that features ultra-low Ron

More information

PI3VeDP212 2-lane DisplayPort Switch/Mux for DP Driven Panels with Triple Control Pins

PI3VeDP212 2-lane DisplayPort Switch/Mux for DP Driven Panels with Triple Control Pins Features 2 Differential Channel, 2:1 mux/demux that will support 2.7Gbps or 1.62Gbps DP signals 1-differential channel is used for AUX signaling Insertion Loss for high speed channels @ 2.7 Gbps: -1.5dB

More information

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch GENERAL DESCRIPTION The SGM44599 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power

More information

1 pc Charge Injection, 100 pa Leakage, CMOS, ±5 V/+5 V/+3 V Dual SPDT Switch ADG636

1 pc Charge Injection, 100 pa Leakage, CMOS, ±5 V/+5 V/+3 V Dual SPDT Switch ADG636 pc Charge Injection, pa Leakage, CMOS, ±5 V/+5 V/+3 V Dual SPDT Switch ADG636 FEATURES pc charge injection ±2.7 V to ±5.5 V dual supply +2.7 V to +5.5 V single supply Automotive temperature range: 4 C

More information

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch GENERAL DESCRIPTION The SGM4461 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power

More information

SGM mW Differential Input, Stereo Audio Power Amplifier

SGM mW Differential Input, Stereo Audio Power Amplifier SGM482 2mW Differential Input, GENERAL DESCRIPTION The SGM482 is a stereo audio power amplifier with differential inputs. Operating on a single 5V power supply, it delivers 2mW of continuous RMS power

More information

SGM Ω, 300MHz, Low-Power Full-Speed USB (12Mbps) Switch

SGM Ω, 300MHz, Low-Power Full-Speed USB (12Mbps) Switch GENERAL ESCRIPTION The SGM2258 is a high-performance, dual, single-pole/ double-throw (SPT) CMOS analog switch designed for switching USB 1.1 signals. High bandwidth and low on-resistance make this switch

More information

PI3V514. Low On-Resistance, 3.3V High-Bandwidth 5-port, 4:1 Mux/DeMux VideoSwitch. Description. Features. Pin Configuration.

PI3V514. Low On-Resistance, 3.3V High-Bandwidth 5-port, 4:1 Mux/DeMux VideoSwitch. Description. Features. Pin Configuration. Features Near-Zero propagation delay 5Ω switches connect inputs to outputs High signal passing bandwidth (400 MHz) Beyond Rail-to-Rail switching 5V I/O tolerant with 3.3V supply 2.5V and 3.3V supply voltage

More information

IDT74FCT257AT/CT/DT FAST CMOS QUAD 2-INPUT MULTIPLEXER

IDT74FCT257AT/CT/DT FAST CMOS QUAD 2-INPUT MULTIPLEXER FAST CMOS QUAD 2-INPUT MULTIPLEXER IDT74FCT257AT/CT/DT FEATURES: A, C, and D grades Low input and output leakage 1µA (max.) CMOS power levels True TTL input and output compatibility: VOH = 3. (typ.) VOL

More information

Dual, 3 V, CMOS, LVDS High Speed Differential Driver ADN4663

Dual, 3 V, CMOS, LVDS High Speed Differential Driver ADN4663 Dual, 3 V, CMOS, LVDS High Speed Differential Driver ADN4663 FEATURES ±15 kv ESD protection on output pins 600 Mbps (300 MHz) switching rates Flow-through pinout simplifies PCB layout 300 ps typical differential

More information

WAS4732D WAS4732D. Descriptions. Features. Order information. Applications. MIC/GND Cross-point Switch for EU/US Headphone Compatible Application

WAS4732D WAS4732D. Descriptions. Features. Order information. Applications. MIC/GND Cross-point Switch for EU/US Headphone Compatible Application / Cross-point Switch for EU/US Headphone Compatible Application http://www.sh-willsemi.com Descriptions The is a 2x2 cross-point switch that is used to interchange the Ground and connections on a headphone

More information

PI3HDMI412-B. 4-Differential Channel, 2:1 Mux/DeMux, DVI/HDMI Compliant Signal Switch based on TMDS Signaling Standard

PI3HDMI412-B. 4-Differential Channel, 2:1 Mux/DeMux, DVI/HDMI Compliant Signal Switch based on TMDS Signaling Standard Compliant Signal Switch based on TMDS Signaling Standard Features 3.3V 4-Differential Channel 2:1 Mux/DeMux DVI, HDMI, 1.2 +1.2 signal compatible Data Rate: 1.65Gbps Supports both AC coupled and DC coupled

More information

1.5 Ω On Resistance, ±15 V/12 V/±5 V, icmos, Dual SPDT Switch ADG1436

1.5 Ω On Resistance, ±15 V/12 V/±5 V, icmos, Dual SPDT Switch ADG1436 Data Sheet.5 Ω On Resistance, ±5 V/2 V/±5 V, icmos, Dual SPDT Switch ADG436 FEATURES.5 Ω on resistance.3 Ω on-resistance flatness. Ω on-resistance match between channels Continuous current per channel

More information

PI2PCIE2422. PCI Express Gen II Compliant, 8-Differential Channel Switch with 8:4 Mux/DeMux Option. Features. Description. Truth Table.

PI2PCIE2422. PCI Express Gen II Compliant, 8-Differential Channel Switch with 8:4 Mux/DeMux Option. Features. Description. Truth Table. Features 8 Differential Channel SPST switch with Mux/DeMux option PCI Express Gen II performance Low Bit-to-Bit Skew: 10ps (between +/- signals) Low Crosstalk: -15dB @ 3.0 GHz Low Off Isolation: -26db

More information

IDT74FCT540AT/CT FAST CMOS OCTAL BUFFER/LINE DRIVER DESCRIPTION: FUNCTIONAL BLOCK DIAGRAM FEATURES:

IDT74FCT540AT/CT FAST CMOS OCTAL BUFFER/LINE DRIVER DESCRIPTION: FUNCTIONAL BLOCK DIAGRAM FEATURES: FAST CMOS OCTAL BUFFER/LINE DRIVER IDT74FCT540AT/CT FEATURES: Low input and output leakage 1µ A (max.) CMOS power levels True TTL input and output compatibility VOH = 3. (typ.) VOL = 0. (typ.) Meets or

More information

CMOS, ±5 V/+5 V, 4 Ω, Single SPDT Switches ADG619/ADG620

CMOS, ±5 V/+5 V, 4 Ω, Single SPDT Switches ADG619/ADG620 CMOS, ± V/+ V, 4 Ω, Single SPDT Switches ADG619/ADG62 FEATURES 6. Ω (maximum) on resistance.8 Ω (maximum) on-resistance flatness 2.7 V to. V single supply ±2.7 V to ±. V dual supply Rail-to-rail operation

More information

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power

More information

PI2PCIE V, PCI Express Gen2 Compliant, 4-Differential Channel, 2:1 Mux/DeMux Switch

PI2PCIE V, PCI Express Gen2 Compliant, 4-Differential Channel, 2:1 Mux/DeMux Switch Features 4 Differential Channel, 2:1 Mux/DeMux PCI Express, Gen 2 Performance, 5.0Gbps Low Bit-to-Bit Skew, 7ps max (between '+' and '-' bits) Low Crosstalk: -23dB@3 GHz Low Off Isolation: -23dB@3 GHz

More information

PI5L

PI5L Wide Bandwidth Low Voltage LanSwitch Quad 2:1 Mux/Demux Features Replaces mechanical relays High-performance, low-cost solution for switching between different LAN signals Ultra-low quiescent power (0.1

More information

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power

More information

UNISONIC TECHNOLOGIES CO., LTD

UNISONIC TECHNOLOGIES CO., LTD U74CBT3257 4-BIT 1-OF-2 FET MULTIPLEXER/ DEMULTIPLEXER UNISONIC TECHNOLOGIES CO., LTD CMOS IC DESCRIPTION The U74CBT3257 is a 4-bit 1-of-2 high-speed TTL-compatible FET multiplexer/demultiplexer. The low

More information

SGM7222 High Speed USB 2.0 (480Mbps) DPDT Analog Switch

SGM7222 High Speed USB 2.0 (480Mbps) DPDT Analog Switch GENERAL DESCRIPTION The SGM7222 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply. SGM7222 is designed for the switching of

More information

SGM9119 Triple, 5th Order, Standard Definition Video Filter Driver

SGM9119 Triple, 5th Order, Standard Definition Video Filter Driver PRODUCT DESCRIPTION The SGM9119 is a low-voltage, triple video amplifier with integrated reconstruction filter and input clamps. Specially suited for standard definition video signals, this device is ideal

More information

SGM ns, Low-Power, 3V/5V, Rail-to-Rail Input Single-Supply Comparator

SGM ns, Low-Power, 3V/5V, Rail-to-Rail Input Single-Supply Comparator 150ns, Low-Power, 3V/5V, Rail-to-Rail GENERAL DESCRIPTION The is a single high-speed comparator optimized for systems powered from a 3V or 5V supply. The device features high-speed response, low-power

More information

1 Ω Typical On Resistance, ±5 V, +12 V, +5 V, and +3.3 V Dual SPDT Switches ADG1636

1 Ω Typical On Resistance, ±5 V, +12 V, +5 V, and +3.3 V Dual SPDT Switches ADG1636 FEATURES Ω typical on resistance.2 Ω on resistance flatness ±3.3 V to ±8 V dual supply operation 3.3 V to 6 V single supply operation No VL supply required 3 V logic-compatible inputs Rail-to-rail operation

More information

High Speed, 3.3 V/5 V Quad 2:1 Mux/Demux (4-Bit, 1 of 2) Bus Switch ADG3257

High Speed, 3.3 V/5 V Quad 2:1 Mux/Demux (4-Bit, 1 of 2) Bus Switch ADG3257 High Speed, 3.3 V/5 V Quad 2:1 Mux/Demux (4-Bit, 1 of 2) Bus Switch ADG3257 FEATURES 100 ps propagation delay through the switch 2 Ω switches connect inputs to outputs Data rates up to 933 Mbps Single

More information

SGM9111 8MHz Rail-to-Rail Composite Video Driver with 6dB Gain

SGM9111 8MHz Rail-to-Rail Composite Video Driver with 6dB Gain SGM9111 8MHz Rail-to-Rail Composite GENERAL DESCRIPTION The SGM9111 is a single rail-to-rail -pole output reconstruction filter with a -3dB bandwidth of 8MHz and 3V/µs slew rate. Operating from single

More information

FAST CMOS 1-TO-10 CLOCK DRIVER

FAST CMOS 1-TO-10 CLOCK DRIVER Integrated Device Technology, Inc. FAST CMOS 1-TO-10 CLOCK DRIVER IDT54/74FCT807BT/CT FEATURES: 0.5 MICRON CMOS Technology Guaranteed low skew < 250ps (max.) Very low duty cycle distortion < 350ps (max.)

More information

SGM W Fully Differential Audio Power Amplifier with Selectable Shutdown

SGM W Fully Differential Audio Power Amplifier with Selectable Shutdown GENERAL DESCRIPTION The SGM4996 is a fully differential audio power amplifier that is designed for portable communication device applications and demanding applications in mobile phones. It is capable

More information

FAST CMOS 8-BIT IDENTITY COMPARATOR

FAST CMOS 8-BIT IDENTITY COMPARATOR FAST CMOS 8-BIT IDENTITY COMPARATOR IDT74FCT521AT/CT FEATURES: A and C grades Low input and output leakage 1µA (max.) CMOS power levels True TTL input and output compatibility: VOH = 3. (typ.) VOL = 0.

More information

QUICKSWITCH PRODUCTS HIGH-PERFORMANCE CMOS TWO CHANNEL 4PST SWITCH

QUICKSWITCH PRODUCTS HIGH-PERFORMANCE CMOS TWO CHANNEL 4PST SWITCH QUICKSWITCH PRODUCTS HIGH-PERFORMANCE CMOS TWO CHANNEL PST SWITCH IDTQSA5 FEATURES: Low ON resistance: rds(on) = 5Ω Wide bandwidth:.3ghz (-3dB point) : db at 5KHz, -7dB at 5MHz, -5dB at 3MHz Off-isolation:

More information

WAS4729QB QB* WAS4729QB. Descriptions. Features. Applications. Order information

WAS4729QB QB* WAS4729QB. Descriptions. Features. Applications. Order information WAS4729QB Low On Resistance (0.75Ω) Dual SPDT Analog Switch with Negative Swing Audio Capability Http//:www.sh-willsemi.com Descriptions The WAS4729QB is a high performance, dual Single Pole Double Throw

More information

SGM9119 Triple, 5th Order, Standard Definition Video Filter Driver

SGM9119 Triple, 5th Order, Standard Definition Video Filter Driver PRODUCT DESCRIPTION The SGM9119 is a low-voltage, triple video amplifier with integrated reconstruction filter and input clamps. Specially suited for standard definition video signals, this device is ideal

More information

PI3L V Quad, 2:1 Mux/DeMux Fast Ethernet LAN Switch w/ Single Enable. Description. Features. Applications. Pin Configuration.

PI3L V Quad, 2:1 Mux/DeMux Fast Ethernet LAN Switch w/ Single Enable. Description. Features. Applications. Pin Configuration. Features R ON is 4Ω typical Low crosstalk: 27dB @ 250 MHz Near-Zero propagation delay: 250ps Switching speed: 9ns Channel On capacitance: 9pF (typical) Operating Range: +3.0V to +3.6V >2kV ESD protection

More information

Description D2+A D2-A D3+A D3-A D0+B D0-B D1+B D1-B D2+B D2-B D3+B D3-B AUX+ A AUX- A HPD A CAB_DETA/LEDA AUX+ B AUX- B HPD B CAB_DETB/LEDB

Description D2+A D2-A D3+A D3-A D0+B D0-B D1+B D1-B D2+B D2-B D3+B D3-B AUX+ A AUX- A HPD A CAB_DETA/LEDA AUX+ B AUX- B HPD B CAB_DETB/LEDB High Bandwidth 6-differential Channel, 1:2 Demux Features 4 Differential Channel, 1:2 DeMux that will support 2.7Gbps DP rev 1.1a signals 1-channel 1:2 demux for DP_HPD signal 1-differential channel 1:2

More information

0.4 Ω CMOS, Dual DPDT Switch in WLCSP/LFCSP/TSSOP ADG888

0.4 Ω CMOS, Dual DPDT Switch in WLCSP/LFCSP/TSSOP ADG888 FEATURES.8 V to 5.5 V operation Ultralow on resistance.4 Ω typical.6 Ω maximum at 5 V supply Excellent audio performance, ultralow distortion.7 Ω typical.4 Ω maximum RON flatness High current carrying

More information

FSAV430 Low Voltage 1.1GHz, 4-Channel, 2:1 Video Switch

FSAV430 Low Voltage 1.1GHz, 4-Channel, 2:1 Video Switch FSAV430 Low Voltage 1.1GHz, 4-Channel, 2:1 Video Switch Features -40dB Off Isolation at 30MHz -60dB Non-Adjacent Channel Crosstalk at 30MHz 3dB Bandwidth: 1.1GHz On Resistance: 4.5 (Typical) Low Power

More information

0.35 Ω CMOS 1.65 V to 3.6 V Single SPDT Switch/2:1 MUX ADG839

0.35 Ω CMOS 1.65 V to 3.6 V Single SPDT Switch/2:1 MUX ADG839 .35 Ω CMOS 1.65 V to 3.6 V Single SPT Switch/2:1 MUX AG839 FEATURES 1.65 V to 3.6 V operation Ultralow on resistance:.35 Ω typical.5 Ω max at 2.7 V supply Excellent audio performance, ultralow distortion:.55

More information

3.3V CMOS 1-TO-10 CLOCK DRIVER

3.3V CMOS 1-TO-10 CLOCK DRIVER 3. CMOS 1-TO-10 CLOCK DRIVER 3. CMOS 1-TO-10 CLOCK DRIVER IDT74/A FEATURES: 0.5 MICRON CMOS Technology Guaranteed low skew < 350ps (max.) Very low duty cycle distortion < 350ps (max.) High speed: propagation

More information

PI2DBS GHz, Differential Broadband Signal Switch, 2-Differential Channel, 2:1 Mux/DeMux Switch

PI2DBS GHz, Differential Broadband Signal Switch, 2-Differential Channel, 2:1 Mux/DeMux Switch Features SAS, SATA2, XAUI Switch 2 Differential Channel, 2:1 Mux/DeMux Bandwidth of 2.0 GHz (3dB) Low Bit-to-Bit Skew :

More information

Description IA 3 IA 2 IA 1 GND. Truth Table (1) H X X Hi-Z Disable S 0-1. L L L I0 S1-0 = 0 L L H I1 S1-0 = 1 Y A to Y B

Description IA 3 IA 2 IA 1 GND. Truth Table (1) H X X Hi-Z Disable S 0-1. L L L I0 S1-0 = 0 L L H I1 S1-0 = 1 Y A to Y B Features Near-Zero propagation delay 5Ω switches connect inputs to outputs High signal passing bandwidth (300MHz) Beyond Rail-to-Rail switching 5V I/O tolerant with 3.3V supply 2.5V and 3.3V supply voltage

More information

SGM Ω, 300MHz, Low-Power Full-Speed USB (12Mbps) Switch

SGM Ω, 300MHz, Low-Power Full-Speed USB (12Mbps) Switch GENERAL ESCRIPTION The SGM2258 is a high-performance, dual, single-pole/ double-throw (SPT) CMOS analog switch designed for switching USB 1.1 signals. High bandwidth and low on-resistance make this switch

More information

SGM721 SGM722 SGM723 SGM µA, 10MHz, Rail-to-Rail I/O CMOS Operational Amplifier FEATURES PRODUCT DESCRIPTION. PIN CONFIGURATIONS (Top View)

SGM721 SGM722 SGM723 SGM µA, 10MHz, Rail-to-Rail I/O CMOS Operational Amplifier FEATURES PRODUCT DESCRIPTION. PIN CONFIGURATIONS (Top View) SGM7 SGM7 SGM73 SGM74 PRODUCT DESCRIPTION The SGM7 (single), SGM7 (dual), SGM73 (single with shutdown) and SGM74 (quad) are low noise, low voltage, and low power operational amplifiers, that can be designed

More information

High Speed, Low Voltage, Dual, DPDT Analog Switch

High Speed, Low Voltage, Dual, DPDT Analog Switch High Speed, Low Voltage, Dual, DPDT Analog Switch General Description UM QFN16 3.0 3.0 UMA QFN16 2.6 1.8 The UM/A is a high speed, dual, dual-pole/double-throw (DPDT) analog switch operates from a single

More information

SGM706 Low-Cost, Microprocessor Supervisory Circuit

SGM706 Low-Cost, Microprocessor Supervisory Circuit GENERAL DESCRIPTION The microprocessor supervisory circuit reduces the complexity and number of components required to monitor power-supply and monitor microprocessor activity. It significantly improves

More information

PI3VDP Lane DisplayPort Rev 1.2 Compliant Switch. Description. Features. Application. Block Diagram

PI3VDP Lane DisplayPort Rev 1.2 Compliant Switch. Description. Features. Application. Block Diagram Features ÎÎ2-lane, 1:2 mux/demux that will support RBR, HBR1, or HBR2 ÎÎ1-channel 1:2 mux/demux for DP_HPD signal ÎÎ1-differential channel 1:2 mux/demux for DP_Aux signal with support up to 720Mbps ÎÎInsertion

More information

PI3USB10LP-A. USB 2.0 High-Speed (480 Mbps) Signal Switch Targeted for Battery Powered Applications. Description. Features.

PI3USB10LP-A. USB 2.0 High-Speed (480 Mbps) Signal Switch Targeted for Battery Powered Applications. Description. Features. Features USB 2.0 compliant (high speed and full speed) R ON is 5.5Ω typical @ V CC = 3.0V Low bit-to-bit skew Low Crosstalk: 40dB @ 500 Mbps Off Isolation: 35dB @ 500 Mbps Near-Zero propagation delay:

More information

FAST CMOS 16-BIT BIDIRECTIONAL 3.3V TO 5V TRANSLATOR

FAST CMOS 16-BIT BIDIRECTIONAL 3.3V TO 5V TRANSLATOR FAST CMOS 16-BIT BIDIRECTIONAL 3. TO 5V TRANSLATOR FAST CMOS 16-BIT BIDIRECTIONAL 3. TO 5V TRANSLATOR IDT74FCT164245T FEATURES: 0.5 MICRON CMOS Technology Bidirectional interface between 3. and 5V buses

More information

SGM9111 8MHz Rail-to-Rail Composite Video Driver with 6dB Gain

SGM9111 8MHz Rail-to-Rail Composite Video Driver with 6dB Gain PRODUCT DESCRIPTION The SGM9111 is single rail-to-rail 5-pole output reconstruction filter with a -3dB bandwidth of 8MHz and a slew rate of 3.8V/µs. Operating from single supplies ranging from 3.V to 5.5V

More information

PI3V312. Low On-Resistance, 3.3V High-Bandwidth 4-Port, 2:1 Mux/DeMux VideoSwitch. Features. Description. Block Diagram. Pin Configuration S 1 Y A 4

PI3V312. Low On-Resistance, 3.3V High-Bandwidth 4-Port, 2:1 Mux/DeMux VideoSwitch. Features. Description. Block Diagram. Pin Configuration S 1 Y A 4 Features Near-Zero propagation delay 5Ω switches connect inputs to outputs High signal passing bandwidth (500MHz) Beyond Rail-to-Rail switching 5V I/O tolerant with 3.3V supply 1.8V, 2.5V and 3.3V supply

More information

SGM Watt Audio Power Amplifier GENERAL DESCRIPTION FEATURES. PIN CONFIGURATIONS (Top View) APPLICATIONS

SGM Watt Audio Power Amplifier GENERAL DESCRIPTION FEATURES. PIN CONFIGURATIONS (Top View) APPLICATIONS . Watt Audio Power Amplifier GENERAL DESCRIPTION The is a.-w, fully integrated, audio power amplifier. It is designed to maximize audio performance in portable applications such as mobile phone. The portable

More information

3 V, LVDS, Quad, CMOS Differential Line Driver ADN4665

3 V, LVDS, Quad, CMOS Differential Line Driver ADN4665 3 V, LVDS, Quad, CMOS Differential Line Driver ADN4665 FEATURES ±15 kv ESD protection on output pins 400 Mbps (200 MHz) switching rates 100 ps typical differential skew 400 ps maximum differential skew

More information

USB2.0 Hi-Speed and Audio Switches with Negative Signal Capability

USB2.0 Hi-Speed and Audio Switches with Negative Signal Capability BCT4153 with Negative Signal Capability GENERAL DESCRIPTION The BCT4153 is a double-pole double-throw (DPDT) analog switch with multiplexes USB2.0 and negative signal audio analog signals. One Channel

More information

SGM706 Low-Cost, Microprocessor Supervisory Circuit

SGM706 Low-Cost, Microprocessor Supervisory Circuit GENERAL DESCRIPTION The microprocessor supervisory circuit reduces the complexity and number of components required to monitor power-supply and monitor microprocessor activity. It significantly improves

More information

3 V/5 V CMOS 0.5 Ω SPDT/2:1 Mux in SC70 ADG849

3 V/5 V CMOS 0.5 Ω SPDT/2:1 Mux in SC70 ADG849 3 V/5 V CMOS.5 Ω SPT/2: Mux in SC7 AG849 FEATURES Ultralow on-resistance:.5 Ω typical.8 Ω maximum at 5 V supply Excellent audio performance, ultralow distortion:.3 Ω typical.24 Ω maximum RON flatness High

More information

Quad SPDT ±15 V/+12 V Switches ADG1334

Quad SPDT ±15 V/+12 V Switches ADG1334 Quad SPT ±15 V/+12 witches AG1334 FEATURES 33 V supply range 13 Ω on resistance Fully specified at ±15 V/+12 V 3 V logic compatible inputs Rail-to-rail operation Break-before-make switching action 2-lead

More information

SGM MHz, Triple, 6dB Video Driver

SGM MHz, Triple, 6dB Video Driver PRODUCT DESCRIPTION The SGM9117 includes triple high-speed video buffers with G = +2 in one package. Every video buffer has -db full signal bandwidth in excess of 2MHz, along with slew rates in excess

More information

BCT4221 High-Speed & Low-Ron DPDT Analog Switch

BCT4221 High-Speed & Low-Ron DPDT Analog Switch BCT4221 High-Speed & Low-Ron DPDT Analog Switch General Description The BCT4221 double-pole double-throw (DPDT) analog switch multiplexes Hi-speed (480MHz) USB and audio analog signals. One Channel has

More information

MAX V Capable, Low-R ON, Beyond-the-Rails DPDT Analog Switch

MAX V Capable, Low-R ON, Beyond-the-Rails DPDT Analog Switch Click here for production status of specific part numbers. MAX2327 12V Capable, Low-R ON, General Description The MAX2327 ultra-small, low-on-resistance (R ON ) double-pole/double-throw (DPDT) analog switches

More information

SGM9119 Triple, 5th-Order, Standard Definition Video Filter Driver

SGM9119 Triple, 5th-Order, Standard Definition Video Filter Driver PRODUCT DESCRIPTION The SGM9119 is a low voltage, triple video amplifier with integrated reconstruction filters and input clamps. Specially suited for standard definition video signals, this device is

More information

description/ordering information

description/ordering information Wide Bandwidth (BW = 300 MHz Min) Low Differential Crosstalk (X TALK = 60 db Typ) Low Power Consumption (I CC = 3 A Max) Bidirectional Data Flow, With Near-Zero Propagation Delay Low ON-State Resistance

More information

LC 2 MOS 5 Ω RON SPST Switches ADG451/ADG452/ADG453

LC 2 MOS 5 Ω RON SPST Switches ADG451/ADG452/ADG453 LC 2 MOS 5 Ω RON SPST Switches ADG45/ADG452/ADG453 FEATURES Low on resistance (4 Ω) On resistance flatness (0.2 Ω) 44 V supply maximum ratings ±5 V analog signal range Fully specified at ±5 V, 2 V, ±5

More information

0.5 Ω CMOS 1.65 V to 3.6 V Dual SPDT/2:1 Mux in Mini LFCSP Package ADG824

0.5 Ω CMOS 1.65 V to 3.6 V Dual SPDT/2:1 Mux in Mini LFCSP Package ADG824 ata Sheet.5 Ω CMOS.65 V to 3.6 V ual SPT/2: Mux in Mini LFCSP Package FEATURES.5 Ω typical on resistance.85 Ω maximum on resistance at 85 C.65 V to 3.6 V operation High current carrying capability: 3 ma

More information

FSAV430 Low Voltage Ultra Low Power High Bandwidth (1.1GHz) Quad SPDT Video Switch

FSAV430 Low Voltage Ultra Low Power High Bandwidth (1.1GHz) Quad SPDT Video Switch 查询 供应商 捷多邦, 专业 PCB 打样工厂,24 小时加急出货 December 2004 Revised December 2004 Low Voltage Ultra Low Power High Bandwidth (1.1GHz) Quad SPDT Video Switch General Description is a high performance Quad SPDT (2-to-1

More information

SGM ns, Low-Power, 3V/5V, Rail-to-Rail Input Single-Supply Comparator

SGM ns, Low-Power, 3V/5V, Rail-to-Rail Input Single-Supply Comparator 45ns, Low-Power, 3V/5V, Rail-to-Rail GENERAL DESCRIPTION The is a single high-speed comparator optimized for systems powered from a 3V or 5V supply. The device features high-speed response, low-power consumption,

More information

SGM4809 Dual 158mW Headphone Amplifier with Active Low Shutdown Mode

SGM4809 Dual 158mW Headphone Amplifier with Active Low Shutdown Mode Dual 58mW Headphone Amplifier GENERAL DESCRIPTION The SGM4809 is a dual audio power amplifier capable of delivering 58mW per channel of continuous average power with less than 0.% distortion(thd N)when

More information

Single, 3 V, CMOS, LVDS Differential Line Receiver ADN4662

Single, 3 V, CMOS, LVDS Differential Line Receiver ADN4662 Data Sheet FEATURES ±15 kv ESD protection on input pins 400 Mbps (200 MHz) switching rates Flow-through pinout simplifies PCB layout 2.5 ns maximum propagation delay 3.3 V power supply High impedance outputs

More information

0.5 Ω CMOS 1.65 V to 3.6 V Dual SPDT/2:1 MUX ADG836L

0.5 Ω CMOS 1.65 V to 3.6 V Dual SPDT/2:1 MUX ADG836L .5 Ω CMOS 1.65 V to 3.6 V ual SPT/2:1 MUX AG836L FEATURES.5 Ω typical on resistance.8 Ω maximum on resistance at 125 C 1.65 V to 3.6 V operation Automotive temperature range: 4 C to +125 C Guaranteed leakage

More information

Low Cost 6-Channel HD/SD Video Filter ADA4420-6

Low Cost 6-Channel HD/SD Video Filter ADA4420-6 Low Cost 6-Channel HD/SD Video Filter FEATURES Sixth-order filters Transparent input sync tip clamp 1 db bandwidth of 26 MHz typical for HD HD rejection @ 75 MHz: 48 db typical NTSC differential gain:.19%

More information

SGM9154 Single Channel, Video Filter Driver for HD (1080p)

SGM9154 Single Channel, Video Filter Driver for HD (1080p) PRODUCT DESCRIPTION The SGM9154 video filter is intended to replace passive LC filters and drivers with an integrated device. The 6th-order channel offers High Definition (HDp) filter. The SGM9154 may

More information