New 1. Temperature unit P J K R. N Indicator. X 12-24VDC VAC 50/60Hz. Indicator Alarm/Sub output. I Indicator
|
|
- Julianna Lambert
- 5 years ago
- Views:
Transcription
1 T3 / T4 Series Features Various size as DIN specifications (W H24, W72 H36, W96 H, W H, W H96, W72 H72, W96 H96mm) Please read Safety Considerations in operation manual before using. Ordering Information T 3 S I N 4 N P 4 C N New 1 Temperature unit Temperature range 3 N C New type to 99.9, -99 to 199, to to to 2 4 to 4 5 to 5 8 to 8 to 999 C to 12 F 6 to 16 Input type 3 Control output P J K R N DPt1Ω J(IC) K(C) R(PR) Indicator larm/sub output Power supply Control method X 12-24VDC VC 5/6Hz N Indicator I Indicator Item Digit Size N DIN W H24mm Y DIN W72 H36mm W DIN W96 Hmm S DIN W Hmm (8-pin plug type) 2 H DIN W H96mm M DIN W72 H72mm L DIN W96 H96mm (3-digit) (4-digit) T Temperature Controller 1: Name plate and connections are different from previous T3/T4 Series. 2: Sockets (PG-8, PS-8(N)) are sold separately. H-116
2 3: Input type and temperature range by Series Input type Thermocouples K(C) J(IC) Specifications to 2 2 to 4 4 to 8 8 to 999 to 12 C to 2 2 to 4 4 to 5 5 R(PR) 6 to 16 F DPt 1Ω to to to 199 to to 2 2 Series Model to 4 4 Please contact us for temperature unit model. T3NI T4YI, T4WI Series T3NI T4YI T4WI T3SI T3HI T4MI T4LI Power supply 12-24VDCᜡ 1-24VCᜠ 5/6Hz llowable voltage range 9 to 11% of rated voltage Power consumption Max. 1W Max. 3V Display method 7-segment (red) LED method Character size (W H) mm mm mm 6. 1.mm mm Input type DPt1Ω (allowable line resistance max. 5Ω per a wire) T3SI T3HI T4MI, T4LI K(C), J(IC) K(C), J(IC), R(PR) Display t room temperature (23ºC ± 5ºC): (PV ±.5% or ±1ºC, select the higher one)±1-digit accuracy 1 Out of room temperature range: (PV±.5% or ±2ºC, select the higher one)±1-digit Sampling period Dielectric strength Vibration Insulation resistance Noise immunity Environment Weight 2 mbient temp. mbient humi. 1ms 1,VC 5/6Hz for 1 min (between input terminal and power terminal) 2,VC 5/6Hz for 1 min (between input terminal and power terminal).75mm amplitude at frequency of 1 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours Over 1MΩ (at 5VDC megger) Square-wave noise by noise simulator (pulse width 1 μs ) ±5V R-phase and S-phase -1 to 5, storage: -2 to 6 Square-wave noise by noise simulator (pulse width 1 μs ) ±2kV R-phase and S-phase 35 to 85% RH, storage: 35 to 85% RH pprox. g (approx. 25g) pprox. 181g pprox. 231g pprox. 12g pprox. 23g pprox. 22g pprox. 274g (approx. 123g) (approx. 14g) (approx. 8g) (approx. 7g) (approx. 7g) (approx. 185g) 1: In case of the T3NI, T3SI Series and the decimal point display models t room temperature (23ºC±5ºC): (PV ±.5% or ±2, select the higher one)±1-digit Out of room temperature range: (PV ±.5% or ±3, select the higher one)±1-digit 2: The weight includes packaging. The weight in parenthesis is for unit only. Environment resistance is rated at no freezing or condensation. () Photoelectric () Fiber Optic (C) Door/rea (D) Proximity (E) Pressure (F) Rotary Encoders (G) Connectors/ Connector Cables/ Sensor Distribution oxes/sockets (H) Temperature (I) SSRs / Power (J) Counters (K) Timers (L) Panel (M) Tacho / Speed / Pulse (N) Display Units (O) Sensor (P) Switching Mode Power Supplies (Q) Stepper Motors & Drivers & (R) Graphic/ Logic Panels (S) Field Network Devices (T) Software H-117
3 T3 / T4 Series Connections Use teminals of size specified below. <Round> a b <Forked> a Min. 3.5mm Min. 3.5mm b Max. 7.2mm Max. 7.2mm a b T3NI T4YI VDC 1W 1-24VC 5/6Hz 3V T4WI 1-24VC 5/6Hz 3V T3SI T4MI 1-24VC 5/6Hz 3V 1-24VC 5/6Hz 3V T3HI, T4LI 1-24VC 5/6Hz 3V H-118
4 Dimensions T3NI () Photoelectric () Fiber Optic (C) Door/rea T4YI (D) Proximity (E) Pressure 36 3 (F) Rotary Encoders (G) Connectors/ Connector Cables/ Sensor Distribution oxes/sockets T4WI (H) Temperature (I) SSRs / Power 45 (J) Counters (K) Timers T3SI (L) Panel (M) Tacho / Speed / Pulse 45 (N) Display Units (O) Sensor T3HI 83 7 (P) Switching Mode Power Supplies (Q) Stepper Motors & Drivers & (R) Graphic/ Logic Panels 96 (S) Field Network Devices (T) Software H-119
5 T3 / T4 Series T4MI T4LI racket T3NI Series T4YI Series T4WI Series T3SI Series T3HI/T4MI/T4LI Series H-12
6 Terminal cover (sold separately) RM-COVER (72 72mm) 7 3 RL-COVER (96 96mm) RH-COVER ( 96mm) () Photoelectric () Fiber Optic (C) Door/rea (D) Proximity (E) Pressure (F) Rotary Encoders Panel cut-out (G) Connectors/ Connector Cables/ Sensor Distribution oxes/sockets (H) Temperature D Series Size C D T3NI Min. 55 Min (I) SSRs / Power T4YI Min. 91 Min C T4WI Min. 116 Min T3SI Min. 65 Min (J) Counters T3HI Min. 65 Min T4MI Min. 9 Min T4LI Min. 115 Min (K) Timers Display When Power Is ON When power is supplied, whole display parts turn ON for 1 sec. It displays model type (digits, size, alarm/sub output and control output, sensor, temp. range, unit). fterward, it returns to RUN mode. Whole parts turn ON Error Display Display Description Troubleshooting OPEN HHHH LLLL Displays digits, size, alarm/sub output When input sensor break/sensor is not connected, it displays [OPEN]. In case of normal operation, it displays the present input temperature. Flashes when a temperature sensor is broken or not connected. Flashes when the measured input value is higher than the temperature range of the sensor. Flashes when the measured input value is lower than the temperature range of the sensor. Displays control output, sensor, temp. range, unit When input sensor break/sensor is not connected RUN mode Normal operation Check the status of the temperature sensor. When the sensor is connected correctly, it is clear. When the measured temperature is within the temperature range of the sensor, it is clear. (L) Panel (M) Tacho / Speed / Pulse (N) Display Units (O) Sensor (P) Switching Mode Power Supplies (Q) Stepper Motors & Drivers & (R) Graphic/ Logic Panels (S) Field Network Devices (T) Software H-121
TA Series. Analog And Non-Indicating Type, PID Control, Set Temperature By Dial. Features. Ordering Information TA S B 4 R P 4 C
T Series nalog nd Non-Indicating Type, PID Control, Set y Dial Features Improved control performance with built-in microcomputer dopting new uto-tuning PID control algorithm : Selectable ON/OFF, PID control
More informationTA Series. Analog And Non-Indicating Type, PID Control, Set Temperature By Dial. Features. Ordering Information TA S B 4 R P 4 C
nalog nd Non-Indicating Type, PID Control, Set Temperature y Dial Features Improved control performance with built-in microcomputer dopting new uto-tuning PID control algorithm : Selectable ON/OFF, PID
More informationNo mark VAC 50/60Hz, VDC 1 12VDC 2 24VAC 50/60Hz, 24VDC. selectable by output operation mode
TN Series DN W48 H48mm, Universal Voltage Multi-unction Timer eatures Realization of wide range of power supply :100-40V 50/0Hz, 4-40VD universal, 4V 50/0Hz, 4VD universal, 1VD Various output operation
More informationNo mark Time-limit SPDT (1c) A Time-limit DPDT (2c) B Time-limit SPDT (1c), Instantaneous SPDT (1c) S DIN W48 H48mm.
Series Digital LCD Timer DIN W48 H48mm Features Power supply : 4-4VAC 5/6Hz, 4-4VDC universal Easy to switch Up/Down mode programmable output modes and timing ranges () Selectable function by front digital
More informationTA Series. Analog Setting Non-Indicating type, PID Control. Analog and non-indicating type, PID control, set temperature by dial.
nalog and non-indicating type, PID control, set temperature by dial Features Improved control performance with built-in microcomputer dopting new uto-tuning PID control algorithm : Selectable ON/OFF, PID
More informationT3S/ T3H/ T4M/ T4L. Digital switch setting type. Features. Ordering information T 3 S B 4 R P 4 C
/ T3/ / T4 Digital switch setting type Features Various size by DIN specification (W48 48, W48 96, W7 7, W96 96mm) ccuracy: F.S. ±.5%(Except ) Free : Series Ordering information T 3 S 4 R 4 Unit range
More informationMulti Function Timer with Free power, Compact size W38 H42mm
Multi Function with Free power, ompact size W8 H4mm Features Wide power supply range : 100-40VA 50/0Hz, 4-40VD (universal), 4VA 50/0Hz / 4VD (universal), 1VD Various output operations( operation modes)
More informationИ М. 2 24VAC 50/60Hz, 24-48VDC VAC 50/60Hz
8 Pin Plug Type DIN W48 H48mm 8 Pin Plug Features Upgraded counting speed: 1cps / 3cps / kcps / 5kcps Selectable voltage input (PNP) method or no-voltage input () method Decimal point setting (fixed decimal
More informationOpaque materials of Min. Ø60mm. Hysteresis - Max. 10% at rated setting distance
Small and light, common type Features Easy to mount at a narrow space with small size and light weight. Convenient to adjust the sensitivity by external sensitivity adjustment control.(diffuse reflective
More informationNo-mark 12-24VDC X 1. Multi-input mode. DIN W72 H36mm DIN W96 H48mm (5digit) D Display Unit
5Y/5W Series Panel Mounting Type, 5 igit isplay Unit Upgraded isplay Unit from Y, W Features Various input specifications : Stic Parallel input, ynamic Parallel input, /5 bit serial input, 6//5 bit serial
More informationDIN W48 H24mm, W72 H36mm Loop powered digital scaling meter [M4NS/M4YS Series]
DIN W48 H24mm, W72 H36mm Loop powered digital scaling [M4NS/M4YS Series] M 4 N S N A supply Measuring function Measuring input range A N S DC4-20mA Loop powered type Scaling N DIN W48 H24mm Y DIN W72 H36mm
More informationM4Y/M4W/M5W/M4M Series
MY/MW/MW/MM Series DN W Hmm, W9 Hmm, W Hmm Digital panel for measuring ampere Features Max. display: 9999(MW), 999(Others) Auto zero function or hold function(except for MW) RMS/AVG value selection function(ac
More informationController Integrated 2-Phase Closed-Loop Stepper Motor Driver
Controller Integrated -Phase Closed-Loop Stepper Motor Driver Features Motor driver and controller integral type Competitive price compared to the servo motor and closed-loop function and fast response
More informationNo mark Time-limit contact 1c Time-limit contact 2c,Time-limit contact A 1c+Instantaneous contact 1c(selectable) DIN W48 H48mm (4digit)
DIN W48 H48mm Digital backlight LCD timer Features Upgraded Features Mounting space saving with compact design : downsized by approx. % in depth compared to existing ls (length of panel on the back side
More informationCommunication Ethernet communication (TCP/IP) 8 8mm 16 16mm 25 25mm W. White R. Red G. Green. Blue M G V. Effective focal length
VG Series Features Light integrated vision sensor Minimized image distortion with global shutter method Proprietary technology to block optical interference to improve optical performance (patent) Stronger
More informationDiameter ø50mm Shaft type Absolute Multi-turn Rotary Encoder
Dia ø50mm Shaft type Absolute Multi-turn otary Encoder Features Compact size of dia ø50mm Parallel data / SSI data transmission type Total 23bit resolution(8388608 divisions) of 10bit single-turn(1024
More informationIndicator (4digit) (5digit) 8-pin plug counter
8 Pin Plug type DIN W8 H8mm 8 Pin plug counter Features Upgraded counting speed : 1cps / cps / 2kcps / 5kcps Decimal point setting(fixed decimal point of display) Wide range of power : 1-2VAC 5/6Hz 12-2VAC
More informationSelect G3PA SSRs and G32A Cartridges to be Discontinued; Replace with G3PA-X or G3PJ Relays, G32A-A-X Cartridges
NO: RL-159 PRODUCT: G3PA SSRs, G32A Cartridges DATE: January 2017 TYPE: Partial Discontinuation Notice Select G3PA SSRs and G32A Cartridges to be Discontinued; Replace with G3PA-X or G3PJ Relays, G32A-A-X
More informationTimers GE1A. GE1A Series ON Delay Timers Single Function
Key features: DPDT or SPDT + instantaneous SPDT 8-pin, octal base 8 time ranges Repeat error ±0.2% maximum Large, clear knob for easy setting Instant monitoring of operational status by LED indicators
More informationHPJSeries HPJ. Ultraminiature Photoelectric Sensors with Self-contained Amplifier
Ultraminiature Photoelectric Sensors with Self-contained Amplifier HPJSeries HPJ Fingertip-size, Provided with a various slit attachments. (six types) Fingertip-size 22 x 11 x 8mm (thru scan model) 30
More informationModel Display digit Size Output Power supply 24VAC 50/60Hz, 24-48VDC 9999 (4-digit) 1-stage setting
FXY Series DIN W7 6mm Of er/timer With Idicatio Oly Features ig speed: cps/cps/kcps/kcps Selectable voltage iput (PNP) method or o-voltage iput (NPN) method Iput mode: Up, Dow, Dow Dot for Decimal Poit
More informationPhase losedloop Stepper Motor Model Power supply llowable voltage range is S Vᜡ is M is L 0 to 0% of the rated voltage is S is M is L is 0S is 0M is 0
is Series Phase losedloop Stepper Motor Features Realized the closed loop with competitive price compared to the servo motor system and rapid response which is advantageous for the short distance continuous
More informationLinear Sliders -Trac-SGT-F
Linear Sliders Model Designations SGT - F 9 N E C Linear Series Linear Slider Slider model Code Specification F F-type iron core Magnet height Voltage Code VC D VC Length of coil assembly Code Encoder
More informationHigh Speed Response Type With Built-in Output Protection Circuit
High Speed Response Type With Builtin Output Protection Circuit Features Reverse power polarity and overcurrent High speed response: Max. ms ight /Dark mode selectable by control wire Builtin the sensitivity
More informationRemote Sensor Amplifier Terminal
9 Remote Sensor Amplifier Terminal Plug-in Sensor Amplifiers with Direct CompoBus/S Terminal Connections 1 SRT1 models support only high-speed communications systems 1 4-point terminals expand to 8 points
More informationHigh Speed Response Type With Built-in Output Protection Circuit
Amplifier Builtin Type By Side High Speed Response Type With Builtin Output Protection Circuit Features Reverse power polarity and overcurrent High speed response: Max. ms ight /Dark mode selectable by
More informationNPN PNP NPN PNP NPN PNP
Cam Positioner Low-Cost, High-Performance Electronic Cam Switch for Use with OMRON E6F Rotary Encoder Control outputs can be programmed to turn ON/OFF in 1 units of rotary encoder shaft rotation Handles
More informationSigma linear axis System configuration
Ver. CHRGE SERVOPCK POWER CHRGE LETL-@-F@ Sigma linear axis Linear servo axis ready to use Highly enclosed construction avoids falling parts into the magnets and bearings area Plug and drive, shorten start-up
More informationAnalog Timer TTL Series
Analog r TTL Series Part Number Description TTL - ❶ ❷ ❸ ❶ Pin Type 8 : 8Pin Socket and Panel mounted ❷ Timing Mode A : A, A1, F1, I B : A, A1, B, F ❸ Supply Voltage 110/220VAC 24VDC 110VDC General Specification
More information20 AMP POWER RELAY HG RELAYS. a HG HG HG Unit weight. Ex. HG 2 AC 240 V
20 AMP POWER RELAY HG RELAYS a 3 1.4 5 RoHS Directive compatibility information http://www.nais-e.com/ a.0 50.0 1.99 8.0 2. FEATURES Large capacity 20 A 250 V AC resistive and 1.5 kw 3 phase 220 V AC motor
More information4-axis board type. Programmable motion controller. 1 to 4Mpps (depends on CPU data setup time)
4-axis Motion Controller 4-axis Board Type Programmable Motion Controller Features Available to control 4-axis independent AC servo motor and stepper motor PC-PCI card Auto home search and synchronous
More informationHG RELAYS 20 AMP POWER RELAY FEATURES SPECIFICATIONS
20 AMP POWER RELAY RELAYS a 3 1.4 5 a.0 50.0 1.99 8.0 2. FEATURES Large capacity 20 A V AC resistive and 1.5 kw 3 phase 220 V AC motor loads High contact reliability after long use Usable with direct soldering,
More informationDC1010/DC1020/DC1030/DC1040
05/0 0-10-10-0-EN Page 1 of DC1010/DC1020/DC100/DC1040 DIGITAL CONTROLLERS Specification Overview The DC1000 Series are microprocessorbased controllers designed with a high degree of functionality and
More informationTRD-J Series Incremental Encoders
Series Encoders eatures ong-lasting disign of mm shaft in ø5mm body. urable metal slit plate. Protection degree IP5 (dust proof) or IP65 (dust and splash proof). Wide voltage ranging from 4.75 to 3 VC.
More informationUltraminiature Photoelectric Switches with Self-contained Amplifier
Ultraminiature Photoelectric Switches with Self-contained Amplifier HPJ Series Fingertip-size, Provided with a various slit attachments. (six types) Fingertip-size 22 x 11 x 8 mm (thru scan model) 30 x
More informationFuzzy Temperature Controllers E5AF
Fuzzy Temperature Controllers 1/4 DIN Controller Combines Fuzzy and PID Control For Fast Response to Process Disturbances Advanced PID control provides optimal response during start-up and steadystate
More informationRatchet Relay. Ordering Information. Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation. G4Q-jjjj
Ratchet Relay Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation Each contact in the double-pole contact mechanism performs alternate make-brake operation at each pulse input
More information4-Axis board type. Programmable motion controller. Max. ±0.5LSB(Within all interpolation range) Max. ±1 LSB(Within all interpolation range)
4-Axis board type programmable motion Features Available to control 4-Axis independent AC servo and stepper PC-PCI card Auto home search and synchronous operation Interpolation on circular/linear, bit
More informationCylindrical type proximity sensor
Cylindrical type Cylindrical type proximity Features Improved the noise resistance with dedicated IC Built-in reverse polarity protection circuit (DC 3-wire type) Built-in surge protection circuit Built-in
More informationAPPENDIX APPENDIX A 1
A 1 SPECIFICATIONS Ratings Supply voltage 100 to 240 VAC, 50/60 Hz 24 VAC, 50/60 Hz/24 VDC Operating voltage range 85 to 110% of rated supply voltage Power consumption 7VA 4VA/2.5W Sensor input Thermocouple
More informationJRQ2 ENCODER POSITION TRANSMITTER MODEL. Plug-in Signal Conditioners M-UNIT. (field-programmable; built-in excitation)
Plug-in Signal Conditioners M-UNIT ENCODER POSITI TRANSMITTER (field-programmable; built-in excitation) MODEL JRQ MODEL & SUFFIX CODE SELECTI JRQ MODEL SELECTI Open collector Voltage pulse RS- line driver
More informationDC1010/DC1020/DC1030/DC1040/Compact type DIGITAL CONTROLLERS Specification
01 May 20 30-10-10--EN Page 1 of DC1010/DC1020/DC1030/DC1040/Compact type DIGITAL CONTROLLERS Specification Overview The DC1000 Series are microprocessorbased controllers designed with a high degree of
More informationTechnical data. General specifications. Measurement range min max. 360
Model Number Features Very small housing High climatic resistance 12 Bit singleturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling
More informationSpecification. Scanning Laser Range Finder UTM-30LX/LN C /6. Date: Symbol Amendment Details Amendment Date Amended by Number
Date: 2008.04.16 Scanning Laser Range Finder UTM-30LX/LN Specification Symbol Amendment Details Amendment Date Amended by Number Approved by Checked by Drawn by Designed by MORI KAMITANI HINO Drawing.
More informationRemote Sensor Amplifier Terminal
9 Remote Sensor Amplifier Terminal Plug-in Sensor Amplifiers with Direct CompoBus/S Terminal Connections 1 SRT1 models support only high-speed communications systems 1 4-point terminals expand to 8 points
More informationBASIC FEATURES C %RH. Shimaden, Temperature and Humidity Control Specialists. CP3701: Thermocouple Temperature Converter
Shimaden, Temperature and Humidity Control Specialists C %RH CP3701: Thermocouple Temperature Converter CP3702: R.T.D. Temperature Converter CP3703: mv DC-DC Converter CP3704: V/mA DC-DC-Converter CP3705:
More informationCount/Time Totalizers
/Time Totalizers Compact or Time Totalizers with Easy-to-Read and NEMA 4 Protection High-visibility, 8.5 mm negative transmissive LCD. NEMA 4 when used in conjunction with Y92S-32 rubber gasket supplied
More informationHigh Reliability Of Fiber Optic Amplifier For Convenient Mounting
Amplifier Reliability Of Amplifier For Convenient Mounting Features speed response: Max. 0.5ms Auto (Button setting)/remote synchronization input, mutual interference protection, selfdiagnosis Reverse
More informationMODEL: W2TS. Mini-MW Series
Space-saving Dual Output Signal Conditioners Mini-MW Series THERMOCOUPLE TRANSMITTER Functions & Features Accepts direct input from a thermocouple and provides a standard process signal 5-segment linearization
More informationMICRO-CONTROLLER X (48mm 48mm)
PX series Digital temperature Controller DT SHEET Socket Type With front dimensions of 8 8mm, this socket type temperature controller enables OnOff control, PID control or 8step ramp/soak function, using
More informationDigital Temperature Controller
www.hynux.com Digital Temperature Controller Economical price Convenient functions High speed sampling High accuracy temperature controlling AX2 AX3 AX4 AX7 AX9 Actualized the highly accurate temperature
More informationGeneral-Purpose Photoelectric Sensors with Self-Contained Amplifier
General-Purpose Photoelectric Sensors with Self-Contained Amplifier HP Series The convenience of industry standards, plus reliability. Effective light axis alignment 50% power savings Prevention of accidental
More informationSafety Precautions. Copyright / Trademarks
Safety Precautions Observe the following notices to ensure personal safety or to prevent accidents. To ensure that you use this product correctly, read this User s Manual thoroughly before use. Make sure
More informationSpecification. Scanning Laser Range Finder C /6. Date:
Date: 2012.11.27 Scanning Laser Range Finder UTM-30LX/LN Specification 2 Correction of Repeated Accuracy Representation 3 2012.11.27 Kamon RS-0155 1 LED Display in Specificaions added 3 2012.10.23 Kamon
More informationNew Servo Concept: Junma
New Servo Concept: Junma Junma uses the world s premier servo technology to provide unmatched performance with a quick and efficient setup. This totally new plug and play design concept requires no parameter
More informationProcess displays For standard signals, temperature, resistance measurement
Features Inputs: Voltage ±10 V, ±200 V / Current ±20 ma / thermocouples J,K,T,N,Pt100,Pt1000 / resistance measurement / potentiometer Display range can be linearised Two limits output Min, Max functions
More informationMINIATURE POWER RELAY IN DS RELAY SERIES FEATURES resistance ORDERING INFORMATION. Ex. DSP 1 L DC12V R
MINIATURE POWER RELAY IN DS RELAY SERIES DSP- RELAYS DSPa DSP SPECIFICATIONS.. DSPa Coil (polarized) (at C F) Minimum mw power coil latching mw mw power coil latching mw.... Contact Arrangement a ab a
More informationDIGEM f 96 x 48 EK. Applications. Description
3-349-002-03 1/7.98 Front panel dimensions: 96 x 48 mm LED display: red or green, 14 mm high Max. display range: 19 999 to + 32 765 Modular connectors for flexible use Simple adjustments at front panel
More informationELECTRONIC COUNTER (with pre-scaling function) UL File No.: E C-UL File No.: E122222
EECTRIC (with pre-scaling function) C-S Counters C-S -digit type -digit type pin type type U File No.: E C-U File No.: E Features. Bright and Easy-to-Read Display A brand new bright -color backlight CD
More informationAcceleration sensors With relay output for limit monitoring Analog / CANopen
Features Acceleration sensor / analog / CANopen Up to two relay outputs for limit monitoring 3 axes detection, MEMS based Measuring range ±2 g Connection: connector M12, 12-pin Offshore capability (plastic
More informationSpecification. Scanning Laser Range Sensor C /7. Date: Symbol Amendment Details Amendment Date Amended by Number
Date: 2008.04.09 Scanning Laser Range Sensor UTM-30LX Specification Symbol Amendment Details Amendment Date Amended by Number Approved by Checked by Drawn by Designed by MORI KAMITANI HINO Drawing. UTM-30LX
More informationTemperature Transmitters - Head Mounted
XTH Features - Non-programmable Models Sensor Types: Models for thermocouple Types J, K, or T Models for RTD Type Pt100 3-wire Select from a variety of pre-configured measuring ranges Internal cold junction
More information12 V DC ±10 % 150 ma max. 130 ma max. 120 ma max.
96 PHOTO PHOTO ON/OFF Input SERI Related Information General terms and conditions... F-3 General precautions... P.9 MEASURE panasonic.net/id/pidsx/global Multi-functional D rail mounting slim sensor controller
More informationScanning Laser Range Finder
Date: 2011.11.25 Scanning Laser Range Finder UTM-30LX-EW Specification Symbol Amendment Details Amendment Date Amended by Number Approved by Checked by Drawn by Designed by MORI KAMITANI TAGAMI HINO Drawing.
More informationMODEL: M2VF MODEL: M2VF [1][2] [3][4]
Super-mini Signal Conditioners Mini-M Series SIGNAL TRANSMITTER (high speed response) Functions & Features Converts DC input from a sensor into a standard process signal Isolation between input and output
More informationVM-701B VIBRATION / DISPLACEMENT MONITOR MODULE Page 1 of 7
Page 1 of 7 No entry if additional Model Code / Additional Spec. Code ( spec. code is not specified. ) VM-701B /PM /AL Phase Marker Function Analysis Function 0 Without 0 Without With Y With 1 (When /ALY
More informationApplications: WEIGHT: grams (typical)
RADIATION TOLERANT VDC A POWER MOSFET OPTOCOUPLER Mii Features: This Design Tested to krad (Si) Total Dose Hermetically Sealed in Surface Mount Package Low On-resistance A Continuous Output Current Performance
More informationTwo outputs: contact and non-contact
SRIS Sensor Controller Multi-functional slim sensor controller DI rail mounting Two outputs: contact and non-contact Connects two sensors -C7W Mountable on 3 mm.378 in DI rail by one-push. It reduces mounting
More informationIncremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution
Features Robust, compact housing Two bearings with large distance, one at each end High shaft load up to 450 N Shock resistant up to 250 g Shaft insulation up to 2.8 kv Highest operating speed 10000 rpm
More informationIncremental encoders Blind or through hollow shaft ø12 mm pulses per revolution
Blind or through hollow shaft ø mm...5 pulses per revolution Features Encoder with blind or through hollow shaft ø mm Optical sensing method Max. 5 pulses per revolution Small profile depth Versatile mounting
More informationAnalogue temperature controllers
Analogue temperature controllers CT8A Input by J-K thermo-couple or by thermo-resistance Pt 00 (-wire) regulation modes : ON/OFF or proportional derivative selected by wiring Relay output Specifications
More informationTemperature Transmitters - DIN Rail Mounted
XTD Features - Non-programmable Models Sensor Types: Models for thermocouple Types J, K, or T Models for RTD Type Pt100 3-wire Select from a variety of pre-configured measuring ranges Internal cold junction
More informationSolid-State Digital Counter H7AN
Solid-State Digital Counter Preset and Totalizing Counters with Up to 8-Digit LED Displays Draw-out construction allows setting, servicing without disconnecting wiring Choose from selectable UP/DOWN or
More informationUSA series. Capable of long-distance measurement Built-in teaching function for simple operation and highlyaccurate
series Ultrasonic displacement sensors (3m Type) Capable of long-distance measurement Built-in teaching function for simple operation and highlyaccurate measurement Integrated temperature sensor for stable
More informationMODEL: KS. Plug-in Signal Conditioners K-UNIT
Plug-in Signal Conditioners K-UNIT DC ALARM Functions & Features Providing relay contact closures at preset DC input levels Dual (Hi/Lo) trip Multi-turn screwdriver setpoint adjustments Monitor jacks provided
More informationBulletin 700-HX Multifunction Digital Timing Relay
Bulletin 700-HX Multifunction Digital Timing Relay Model Operating Mode Timing Range Socket Type Contact Output No. of Pins Input Voltage Cat. No. Cat. No. 700 HX A mode: Signal ON-Delay 1 A-1 mode: Signal
More informationTechnical data. General specifications. Linearity error ± 0.1 Electrical specifications Operating voltage U B
Model Number SYNCHRON SERIELLES INTERFACE Features Very small housing Up to 32 Bit multiturn SSI interface Free of wear magnetic sampling High resolution and accuracy Description The ENA36IL series are
More informationPID CONTROLLERS LT SERIES
PID CONTROLLERS LT SERIES The Axis family of microprocessor based controllerscombine a high degree of functionality and reliability at a very low price, in 4 different formats : 1/16 DIN, 1/8 DIN, 1/ 4
More informationMODEL: DA3. Plug-in Signal Conditioners M-UNIT
Plug-in Signal Conditioners M-UNIT D/A CONVERTER (16-bit resolution) Functions & Features Converts parallel digital signal into a DC output BCD, binary, offset binary, two's complement, reflected binary
More informationDistributed by: www.jameco.com -8-83-22 The content and copyrights of the attached material are the property of its owner. VDE TV-, AMP ( Form A) Power Relay HE RELAYS.299 3.8.9 RoHS Directive compatibility
More informationFuzzy Temperature Controllers E5EF
Fuzzy Temperature lers EEF / DIN lers Combine Fuzzy and PID For Fast Response to Process Disturbances dvanced PID control for optimal response during startup and steadystate operation Fuzzy and PID control
More informationREX-F400 REX-F700 REX-F900
REX-F REX-F REX-F General The F series controller provides precise control with high accuracy of.% full scale and short sampling time of. second. ewly developed and unique logic, rilliant PID control and
More information10A to 40A hockey puck type FEATURES
(1A, A, A type) (3A, 4A type) 1A to 4A hockey puck type RELAYS FEATURES 1. Two types of terminal shape: Plugin terminal and Screw terminal (3 A, 4 A is screw terminal types only). Flat type of SSR possible
More informationMODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
MODEL: MMNV Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels
More informationRelay output SSR drive output Current output(dc4-20ma) Power supply TZ4SP/TZN4S. 1 Event 1 output TZ4ST
TZN/TZ Series Dual PID auto tuning control Features Dual PID auto tuning function: igh-speed response of PID control to reach to the desired value fast, low-speed of response of PID control to minimize
More informationContents H3CR. DIN 48 x 48-mm Multifunctional Timer Series. Broad Line-up of H3CR Series H3CR-A. Solid-state Timer. Common to ALL Timers
Solid-state Timer H3CR DIN 48 x 48-mm Multifunctional Timer Series Conforms to EN61812-1 and EN60664-1 (VDE0110) 4 kv/2 for Low Voltage, and EMC Directives. Approved by UL and CSA. Lloyds/NK approvals.
More informationMP5S/MP5Y/MP5W Series. Pulse Meter
S/Y/W Series Pulse Meter igh Performance, Digital Panel Meter Features 3 types of operation mode are added. (total 6 types of operation mode) Frequency/Revolutions/Speed, Passing speed, Cycle, Passing
More informationFC Series Signal Conditioners
FC Series Signal Conditioners FC-33 DC Selectable Signal Conditioner with 3-way isolation Field configurable input and output ranges of 0-5V, 0-10 V, 0-20 ma and 4-20 ma with 1500 VDC isolation between
More informationRelays & Sockets RY/RM RY/RM Series Miniature Relays. Part Number Selection
RY/RM Series Miniature Relays Key features: RY (A), RY (A), RM (A) General purpose miniature relays A or A contact capacity Wide variety of terminal styles and coil voltages meet a wide range of applications
More informationWHEN A PLC IS TOO MUCH, AND SPACE FOR
WHEN A PLC IS TOO MUCH, AND SPACE FOR A RELAY SEQUENCE CIRCUIT IS TOO LITTLE Pattern Selector 59 2.33 66 2.6 70 2.75 No programming required Select from among 15 preset patterns Wiring far simpler than
More informationTSC. Transtech Signal Conditioners. Galvanic Isolation as Standard Full Input Range Field Adjustable 0.1% Accuracy Dual Rail Mounting.
TSC Transtech Signal Conditioners Industrial AUSTRALIAN DESIGNED AND MANUFACTURED Process Galvanic Isolation as Standard Full Input Range Field Adjustable 0.1% Accuracy Dual Rail Mounting Mining Dec 2005
More informationMultiturn absolute encoder
SYNCHRON SERIELLES INTERFACE Multiturn absolute encoder Model Number Features Industrial standard housing Ø58 mm 30 Bit multiturn Data transfer up to 2 MBaud Optically isolated RS 422 interface Recessed
More informationSolid-state Timer H3CR. DIN 48 x 48-mm Multifunctional Timer Series. Broad Line-up of H3CR Series H3CR-A
Solid-state Timer H3CR DIN 48 x 48-mm Multifunctional Timer Series Conforms to EN61812-1 and EN60664-1 (VDE0110) 4 kv/2. Conforms to EMC standards (EN50081-2 and EN50082-2). Approved by UL and CSA. Lloyds/NK
More informationMODEL: M1EXT. with Display M1E Series
2 Channel Super-mini Signal Conditioners with Display M1E Series THERMOCOUPLE TRANSMITTER (2 channels, PC programmable) Functions & Features Accepts direct input from a thermocouple and provides a linearized
More informationKCM-50/51 Series. Consolidated Counter (Maintenance Counter) Features KCM-50 Series. KCM-51 Series. Electronic Counter / Controller.
/ Controller -0/1 Series Features Consolidated (Maintenance ) - The -0 series consolidates nine counters into one unit and the -1 series consolidates eight counters (timers) into one unit. - These counters
More informationCompoBus/D-type Digital Controller
CompoBus/D-type Digital Controller Digital Controller for the CompoBus/D and Conforming the DeviceNet Conforms the DeviceNet and connects a Programmable Controller without any programming. High performance
More informationTimers. GT3A Series Analog Timers. GT3A-1 GT3A-2 GT3A-3 GT3A-4,-5,-6 Operation Multi-mode Multi-mode with inputs (11 pins) Time Range
GT3A Key features: 4 selectable operation modes on each model External start, reset, and gate inputs Panel mount or socket mount Large variety of timing functions and output status indicating LEDs UL,
More informationRM36. Rotation sensors RM36 Absolute rotary encoder
Rotation sensors RM36 Absolute rotary encoder RM36 Description The RM36 is a high-speed magnetic rotary encoder designed for use in harsh industrial environments. The non-contact two-part design removes
More informationMODEL: M2SES SEN TRONIC AG [3] OUTPUT
Super-mini Signal Conditioners Mini-M Series HIGH/LOW SELECTOR Functions & Features Monitors two DC input signals and transmits an output signal proportional to the higher or lower input CE marking UL
More informationMODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels CE marking
More information