No-mark 12-24VDC X 1. Multi-input mode. DIN W72 H36mm DIN W96 H48mm (5digit) D Display Unit

Size: px

Start display at page:

Download "No-mark 12-24VDC X 1. Multi-input mode. DIN W72 H36mm DIN W96 H48mm (5digit) D Display Unit"

Ethelbert Ward
5 years ago
Views:

5Y/5W Series Panel Mounting Type, 5 igit isplay Unit Upgraded isplay Unit from Y, W Features Various input specifications : Stic Parallel input, ynamic Parallel input, /5 bit serial input, 6//5 bit

1 5Y/5W Series Panel Mounting Type, 5 igit isplay Unit Upgraded isplay Unit from Y, W Features Various input specifications : Stic Parallel input, ynamic Parallel input, /5 bit serial input, 6//5 bit serial input method ecimal point, "-" minus sign display selection function : isplay type by serial input isplay type by external P terminal and MINUS terminal Positive/Negative logic input selection function isplay digit selection function : digit(-9999 to 9999), 5digit( to 99999) Zero blanking function selection function Selecble reversion function of latch signal Please read aution for your safety in operation manual before using. Ordering information 5 W M X () Photo electric () Fiber optic () oor/rea () Proximity (E) Pressure (F) Rory encoder (G) onnector/ Socket (H) Temp. Power supply Input Size igit Item : Power is only for 5W and it is option. No-mark -V X M Y W /V 5/6Hz Multi-input mode IN W7 H6mm IN W96 H8mm (5digit) isplay Unit (I) SSR/ Power (J) ounter (K) Timer (L) Panel Specifications Model 5Y-M 5W-M 5W-MX Power supply -V /V 5/6Hz llowable volge range 9 to % of rated volge urrent consumption Max..W Max. V haracter size W7 Hmm isplay method 7Segment LE display (red) isplay digit Selecble digit(or ½ digit including symbol bit), 5digit Max. LOK Hz to 5kHz Input logic Selecble positive(pnp) or negative(npn) Input method Stic parallel, ynamic parallel, /5 it serial, Serial(6//5 it) Input level High : 5-V, Low : -.V Insulation resisnce MΩ(at 5V megger) ielectric strength V 5/6Hz for minute Noise strength ±kv the square wave noise(pulse width : μs )by the noise simulator Vibration Mechanical.75mm amplitude at frequency of to 55Hz(for min.) in each of X, Y, Z directions for hour Malfunction.5mm amplitude at frequency of to 55Hz(for min.) in each of X, Y, Z directions for minutes Shock Mechanical m/s² (approx. G) in each of X, Y, Z directions for times Malfunction m/s² (approx. G) in each of X, Y, Z directions for times Environ mbient temperature - to 5, storage : -5 to 65 -ment mbient humidity 5 to 85%RH, storage : 5 to 85%RH Unit weight pprox. 75g pprox. 65g pprox. 67g The max. LOK is when the duty ratio is :. Environment resisnce is rated at no freezing or condensation. (M) Tacho/ Speed/ Pulse (N) isplay unit (O) Sensor (P) Switching mode power supply (Q) Stepper motor& river&ontroller (R) Graphic/ Logic panel (S) Field neork device (T) Sofare (U) Other N-5

2 5Y/5W Series imensions 5Y-M Panel cut-out (unit: mm) Min. 9 6 Min Hirose connector 5W-M/5W-MX Panel cut-out Min. 8 5 Min Hirose connector pin header model : HIF-6P-.5S Hirose connector socket is not included with this unit. onct hirose connector vendors for socket and cable. [Socket : HIF-6-.5R] " " mark indicates pin No. of hirose connector. When it is power option, it is the terminal block for power. Hirose connector onnections Stic parallel input Minus 5 P ynamic parallel input P Minus OT INPUT 6 -V 8 N +5V V N +5V P P /5it serial input Serial input Minus 5 P OT 5 Minus 5 P T N INPUT 6 -V 8 N +5V P 6 8 LOK 6 6 -V 8 N +5V P LOK Power terminal for power option of 5W series V V V SOURE bove terminal connection diagrams's number set by pin no. of hirose connector. Please note that " " mark indicates pin no. of hirose connector. In case of Stic parallel input, 5digit cannot be used because of external terminal To display 5 digit in ynamic parallel, /5 bit serial, serial input, display range is to and it cannot display minus sign. Therefore, the applied signal to the external minus sign input terminal(pin no.) is ignored. Regardless of input logic, connect external P terminal(pin no.7, 8, 9) or external minus sign input terminal(pin no.) to +5V(pin no.) and it displays decimal point and minus sign. N-6

3 Panel Mounting Type, 5 igit isplay Unit Input circuit Positive logic(pnp) input PNP : Input NPN : SIGNL ISPLY SIGNL k k k k Input level High: 5-V Low: -.V Negative logic(npn) input Input ISPLY 5V k k k k () Photo electric () Fiber optic () oor/rea () Proximity (E) Pressure Input timing Parallel input Positive logic(pnp) input Pw Input da t t t Pw=t+t+t Input da Pw : Min..ms t : Min..5ms a latch t : Min..ms a move t : Min..5ms a latch Negative logic(npn) input t Pw t t (F) Rory encoder (G) onnector/ Socket (H) Temp. (I) SSR/ Power (J) ounter (K) Timer (L) Panel Serial input Positive logic(pnp) input: LOK max. 5kHz (M) Tacho/ Speed/ Pulse (N) isplay unit LOK.ms N- N- N : Min..5ms : Min..ms : Min..m (O) Sensor (P) Switching mode power supply T N- N- N (Q) Stepper motor& river&ontroller Negative logic(npn) input: LOK max. 5kHz (R) Graphic/ Logic panel (S) Field neork device LOK.ms N- N- N : Min..5ms : Min..ms : Min..ms (T) Sofare (U) Other T N- N- N N-7

4 5Y/5W Series Input da chart isplay Negative(NPN) input Positive(PNP) input H H H H L L L L L H L H H H L H L L L H H L H H L L H L L H L L H H L H H L L H H H L H L L L H L H 5 L H L H L H L H L H 6 H L L H L L H H L H 7 L L L H L H H H L H 8 H H H L L L L L H H 9 L H H L L H L L H H HOL X X X X H X X X X L Input level : High 5-V, Low -.V "X": Either high or low level can be input. How to select decimal point OT and minus sign input is not serial input [SW = ] Terminal 7- : 8- : 9- : - : OPEN : 888*8 88*88 8* OT and minus sign input is serial input [SW = ] When it is ynamic parallel input and /5 bit input, it connects with no.5 pin. (Refer to time chart for digit) When it is serial input, bit of serial da should have OT and minus sign and the T is input. (Refer to time chart for digit) N-8

5 Panel Mounting Type, 5 igit isplay Unit Inner selection switch SW6 Positive logic Negative logic Input mode SW SW SW SW 5Y-M SW to SW5 EPG 5 SW SW SW SW Stic parallel input ynamic parallel input Zero blanking function Using zero blanking function SW Non-using zero blanking function Zero blanking function It is to remove ""indication which is no meaning. EX)When indication value is "" in digit LE Zero blanking function is applied : Zero blanking function is not applied : SW6 Positive logic Negative logic Minus signal/ot(ecimal point) input terminal Using OT terminal(pin no. 5) SW Using external P(pin no. 7, 8, 9, ) terminal and minus(pin no. ) terminal Factory default /5 it serial input Serial input 5W-M SW to SW5 EPG 5 isplay digit SW5 In case of Stic parallel input, 5digit cannot be used because of external terminal. Input logic SW6 If changing inner selecting switch when power is, it does not operate as a changed mode. If the mode is changed when power is, please turn and then turn the power. Latch input signal SW7 PNP PNP output and latch signal of low speed serial output, which are optional of utonics pulse (MP5Y/W Series) and panel (MTY/W Series) is output to positive logic (NPN). If connecting 5Y/W, use it after setting SW6 to NPN and soldering () the semi-conct (SW7) of inner P solder plate. Selection switch Factory default Selection switch Factory default SW SW5 SW SW6 Negative logic SW SW7 SW NPN NPN PNP NPN 5digit ( to 99999) digit (-9999 to 9999) Positive(PNP) input Negative(NPN) input Reverse latch signal to set logic in SW6 orrespond latch signal to set logic in SW6 Input logic Input mode Zero lanking MINUS/OT input terminal isplay digit () Photo electric () Fiber optic () oor/rea () Proximity (E) Pressure (F) Rory encoder (G) onnector/ Socket (H) Temp. (I) SSR/ Power (J) ounter (K) Timer (L) Panel (M) Tacho/ Speed/ Pulse (N) isplay unit (O) Sensor (P) Switching mode power supply (Q) Stepper motor& river&ontroller (R) Graphic/ Logic panel (S) Field neork device (T) Sofare (U) Other N-9

6 5Y/5W Series N- Time chart(digit) ynamic parallel input Inner selection switch : SW, SW, SW, SW, SW5 t t t Pw Pw = Min..ms t = Min..5ms Latch t = Min..ms input SIG. t = Min..5ms /5 it serial input Inner selection switch : SW, SW, SW, SW, SW5 LOK OT ISPLY -. 8 Serial input it T input: Negative logic(npn) Srt Input chart OT OT OT OT OT LOK T ISPLY Minus sign -. is indicated The waveform is for negative logic input(npn). In case of positive logic(pnp), it will be reversed. When OT signal da(6th) is input on position, minus sign is indicated. 6it T input: Negative logic(npn) Srt Input chart LOK T ISPLY OT ISPLY -. 8 input SIG The waveform is for negative logic input(npn). In case of positive logic(pnp), it will be reversed. If dot da is inputted on position, it displayed "-" signal. (Inner selection switch SW ) oncerning decimal point and "-" signal, it can be displayed using outer P and minus terminal not a serial input. (Inner selection switch SW ) The left application of display indicates non-using zero blank function. If using zero blank function, the "" on position is not displayed.(inner selection switch SW ) = Min..5ms = Min..ms = Min..ms The waveform is for negative logic input(npn). In case of positive logic(pnp), it will be reversed. T is fixed when LOK is changed from high to low and held when is changed from high to low. T hold term is before next is changed from high to low. The waveform is for negative logic input(npn). In case of positive logic(pnp), it will be reversed. For digit, external input terminal is not available. If OT da is inputted on position, it displays "-" signal. (Inner selection switch SW ) oncerning decimal point and "-" signal, it can be displayed using outer P and minus terminal not a serial input. (Inner selection switch SW ) Latch input should be later than input, otherwise, it will display the previous da. The left application of display indicates non-using zero black function. If using zero blank function, the "" on position is not displayed. (Inner selection switch SW ) : Min..5ms : Min..ms : Min..ms

7 Panel Mounting Type, 5 igit isplay Unit Time chart(5digit) ynamic parallel input Inner selection switch : SW, SW, SW, SW, SW5. OT LOK OT 5it T input: Negative logic(npn) Srt Input chart OT OT OT OT OT OT LOK T ISPLY 8. : Min..5ms it T input: Negative logic(npn) : Min..ms : Min..ms Srt Input chart LOK T ISPLY t t t Serial input 8 Pw ISPLY. 8 ISPLY. 8 Latch input SIG. input SIG. Pw = t+t+t Pw = Min..ms t = Min..5ms t = Min..ms t = Min..5ms /5 it serial input Inner selection switch : SW, SW, SW, SW, SW5. The waveform is for negative logic input(npn). In case of positive logic(pnp), it will be reversed. It is impossible to display the "-" at 5digit line. input should be later than input, otherwise, it will display the previous T. The left application of display indicates non-using zero blank function, If using zero blank function, the "" on position is not displayed. (Inner selection switch SW ) The waveform is for negative logic input(npn). In case of positive logic(pnp), it will be reversed. It is impossible to display the "-" at 5digit line. The left application of display indicates non-using zero blank function, the "" on position is not displayed. (Inner selection switch SW ) = Min..5ms = Min..ms = Min..ms. () Photo electric () Fiber optic () oor/rea () Proximity (E) Pressure (F) Rory encoder (G) onnector/ Socket (H) Temp. (I) SSR/ Power (J) ounter (K) Timer (L) Panel (M) Tacho/ Speed/ Pulse (N) isplay unit (O) Sensor (P) Switching mode power supply (Q) Stepper motor& river&ontroller (R) Graphic/ Logic panel (S) Field neork device (T) Sofare (U) Other The waveform is for negative logic input(npn). In case of positive logic(pnp), it will be reversed. Minus sign cannot be indicated in 5digit type. [The input of OT signal on position and MINUS terminal(pin No. ) is ignored.] T is fixed when LOK is changed from high to low and held when is changed from high to low. T hold term is before next is changed from high to low. N-

8 5Y/5W Series Proper usage Storage void direct ray of light when keeping this unit long time, and keep it under -5 to 65, 5 to 85%RH of relative humidity. Noise In case of the product(5w-mx) using power, inflow of noise through a power line is a major circuit built-in small product. Therefore, use an absorbing circuit such as outer line filter and varistor when abnormal volge occurs in the same line by power relay, magnet S/W, using a highfrequency machine, high volge of spark of lightning stroke. ase dechment 5Y-M Push the terminal block to front part The method by line filter Mount it on the display unit as near as possible Widen the both inside of lock devices with a driver, and push the terminal block to the direction of front part. /V isplay unit 5W-M / 5W-MX Line filter Earth ground The method by varistor and ZNR /V isplay unit Input signal line should be short as much as possible. If the line is too long, it is easy to affect noise. If the time of input signal is overlapped, it may occur faint light. Oil, soot or dust must not be flown into the product. decimal point and minus sign can be displayed with the outer P terminal and the minus terminal when signal level is "High".(High level : 5V-V) ecause hirose connector has both power line (- V) and da signal line, please connect the lines after checking the connection figure. Push the lock part on the side to the direction, and then push the terminal block to the direction to dech the case. e careful in order not to be wounded. Turn the power before deching the case. N-

Multi Function Timer with Free power, Compact size W38 H42mm

Multi Function Timer with Free power, Compact size W38 H42mm Multi Function with Free power, ompact size W8 H4mm Features Wide power supply range : 100-40VA 50/0Hz, 4-40VD (universal), 4VA 50/0Hz / 4VD (universal), 1VD Various output operations( operation modes)