KCM-50/51 Series. Consolidated Counter (Maintenance Counter) Features KCM-50 Series. KCM-51 Series. Electronic Counter / Controller.

Size: px

Start display at page:

Download "KCM-50/51 Series. Consolidated Counter (Maintenance Counter) Features KCM-50 Series. KCM-51 Series. Electronic Counter / Controller."

Tracy Hines
5 years ago
Views:

/ Controller -0/1 Series Features Consolidated (Maintenance ) - The -0 series consolidates nine counters into one unit and the -1 series consolidates eight counters (timers) into one unit.

- Tool management: Replacement prediction / warning - Whetstone f polishing: Maintenance prediction - Quantity management: Total counter / Preset counter - Time management: Integrating timer Features

1 / Controller -0/1 Series Features Consolidated (Maintenance ) - The -0 series consolidates nine counters into one unit and the -1 series consolidates eight counters (timers) into one unit. - These counters notify the maintenance period of several tools, as needed f tool replacement with machining centers and NC machine tools. - Tool management: Replacement prediction / warning - Whetstone f polishing: Maintenance prediction - Quantity management: Total counter / Preset counter - Time management: Integrating timer Features -0 Series The counter features counting inputs, a preset function and independent prediction output (count up output), and outputs when either one of the counters reaches the equipment stop set value. -1 Series The counter features counting inputs, a preset function and independent prediction output (count up output), and outputs when either one of the counters (Timers) reaches the equipment stop set value. Open collect output: -0 (Japanese surface sheet) -0-1 (English surface sheet) Open collect output: -1 (Japanese surface sheet) -1-1 (English surface sheet) Voltage output: -0P (Japanese surface sheet) -0P-1 (English surface sheet) - Nine -digit preset counters (timers) are consolidated into one unit. - Battery-less The set value / discrete value are memized by a maintenance-free EEPROM. - Individual prediction (preset) outputs f circuits - Indications of the previous prediction (green) - prediction (ange) - facility stop (red) are distinguished by col. A previous prediction display function that notifies that the value is close to the prediction set value is built-in. - stop output An over-value is set f the prediction set value of each counter, and when any one of the counters reaches the over-value, the equipment stop is output (red display). - preset counters can be used as a total counter Each counter can independently preset value s(prediction setting) and individually count the inputs and outputs against the preset value (ange display). - Oilproof front operation panel - Miniature (DIN x mm) The overall depth is mm, so the control panel is thin. - Eight -digit preset counters (timers) are consolidated into one unit. - Battery-less The set value / discrete value are memized by a maintenance-free EEPROM. - Individual prediction (preset) outputs f circuits - Each counter (timer) displays a different col when the set value is reached. Setting 1 (green) - Setting (ange) - Setting (red) - output When any one of the counters (timers) reaches the value of setting 1 setting, the output is produced. - preset counters can be used as a total counter a integrating timer. The counter / timer functions can be mixed in use. - Any counter / timer can be reset by external signal. - Oilproof front operation panel - Miniature (DIN x mm) The overall depth is mm, so the control panel is thin. GENERAL CATALOG 01 Latest catalog (free) is available online. Visit our website

2 / Controller Application -0 Series Tool Maintenance of Multiple Spindle Machine Tools 1 Processing Count 1-0/1 Series Features -1 Series Tool Maintenance of Multiple Spindle Machine Tools 1 Processing Count Timekeeping 1 Facility Output Lamp / Buzzer /Facility, etc. Output 1 Output Output Output Lamp / Buzzer /Facility, etc. Setting Output 1 Setting Output Output Setting Note 1) s to perfm similar operation. ) The equipment stop output and the equipment stop display turn on when any one of the counters, 1 to, reaches the equipment stop set value. Note 1) s / Timers to perfm similar operation. ) The output turns on when any one of the counters (timers), 1 to, reaches the value of setting 1 (setting ). Basic Operation -0-0 Series Time Chart Current Values (Count Values) Current Values (Count Values) Set Value Set Value Set Value Set Value Previous Previous Set Value Set Value No.1-1 Series Time Chart Current Values (Count Values/Timing Value) Setting 1 Setting Setting 1 /Timer No.1-1 Green Orange Count 1 Green Orange Red Count 1 Green Orange Red Previous /Alarm Previous /Alarm Display Display Display Display Output Output H (OFF) H (OFF) Facility Output Facility Output L (ON) L (ON) (External Key ) (External Key ) Setting 1/Setting Display Setting Output Output (External Key ) Green Orange Green Orange Red Count/Timer 1 H (OFF) L (ON) The specifications and prices described in this catalog were valid when the catalog was issued. F the latest infmation, contact our sales persons see our website. GENERAL CATALOG 01

3 / Controller -0/1 Series Each Part Name and Function Panel Explanation -0 Series key - s the displayed current value. - When several counters are counting up and the reset operation is perfmed, the counter display switches to the next counter. Mode display - Either previous prediction, prediction, equipment stop is displayed in the setting mode. When all the lights are turned off, the device is the operation run mode. No. display - Displays the selected counter No. - Ever y time the counter counts up (prediction set value), the counter No. switches to the No. of the counter that overflowed. No. Previous Setting No. Mode Selection Selection Current Value Set Value Set Setting key No. selection key - Switches the display between the current value and the set value of the counter. - s that are not used in the run mode are not displayed. longer, the counter No. automatically changes. Count-up display (GreenOrangeRed) - Green: Shows that the value reached the previous prediction set value. - Orange: Shows that the value reached the prediction set value. - Red: Shows that the value reached the equipment stop set value. stop display (Red) - Shows that one of the counters reached the equipment stop set value. Current value display - Displays the current value of the counter by counter No. Zeros of high-der digits are out in the run mode. Set value display - Displays the set value of the counter (prediction, previous prediction, and equipment stop) by counter No. Zeros of high-der digits are out in the run mode. Setting mode selection key - Switches between the run mode and the setting mode. If there is no key entry f 1 minute longer, the mode automatically switches to the run mode. Key (Digit selection key) - Selects the digit f inputting the set value. - The selected digit flickers. + Key (Numeric value changing key) - Changes the numeric value of the digit selected by the key. Set key - Enters the set value in memy in the setting mode. When the set value is entered, the set value display flickers three times, indicating the input. GENERAL CATALOG 01 Latest catalog (free) is available online. Visit our website

4 / Controller -0/1 Series Each Part Name and Function Panel Explanation -1 Series key - s the displayed current value. - When several counters are counting up and the reset operation is perfmed, the counter display switches to the next counter. Mode display - Either setting 1, setting, setting is displayed in the setting mode. When all the lights are turned off, the device is the operation run mode. display - Displays the selected counter / timer No. - Every time the counter / timer counts up (setting ), the counter / timer No. switches to the No. of the counter that overflowed. Setting 1 [Green] Selection Setting 1 Setting Setting Mode Setting [Orange] Setting [Red] Current Value Setting key selection key - Switches the display between the current value and the set value of the counter. - s/timers that are not used in the run mode are not displayed. longer, the counter No. automatically changes. Mode key - Switches between the run mode and the setting mode. - If there is no key entry f 1 minute longer, the mode automatically switches to the run mode. Red h Orange min Set Value Set Green s Count-up display (GreenOrangeRed) - GreenShows that the value reached the Setting 1. - OrangeShows that the value reached the Setting. - RedShows that the value reached the Setting. Timing unit display - Displays the timing unit by col during timer operation. - Green: The time unit is in seconds. - Orange: The time unit is in minutes. - Red: The time unit is in hours. Current value display - Displays the current value of the counter/ timer by Zeros of high-der digits are out in the run mode. Set value display - Displays the set value of the counter/ timer (Setting 1, setting, and setting ) by Zeros of high-der digits are out in the run mode. Key (Digit selection key) - Selects the digit f inputting the set value. - The selected digit flickers. + Key (Numeric value changing key) - Changes the numeric value of the digit selected by the key. Set key - Enters the set value in memy in the setting mode. When the set value is entered, the set value display flickers three times, indicating the input. The specifications and prices described in this catalog were valid when the catalog was issued. F the latest infmation, contact our sales persons see our website. GENERAL CATALOG 01

5 / Controller Count-up Display Display Count 1 + V -0/1 Series 1 V DC±10% Output1 Count-up Current DisplayValue Display Display + V Count 1 No. + V Supply Display 1 Set Value Display Output Output1 No. Display digits Set -stage Value Display Counting Speed Switching Preset V DC±10% No. Selection Count-up Display Display + V Supply Count 1 digits + -stage V Supply 0 CPU V Nmal 1 + Counting Speed Switching Preset No. Selection Current Value Display Output1 V DC±10% No. Display Set Value Display + 0 *1 V V DC±1% V DC±10% V DC±10% * Count-up Display Display + V Count 1 + V Supply digits -stage *1 V DC±1% 1 Counting Speed Switching Preset V DC±10% No. Selection IN Count-up Current DisplayValue Display Output1 * Display + V Count 1 No. + RUN V Output Supply Display 1 Set Value Display + V DC±10% Output1 No. Display digits Set -stage Value Display *1 V DC±1% Counting Speed Switching V DC±10% Preset * Count-up No. Selection Display Display + V Count 1 + V Supply digits -stage 1 Counting Speed Switching Preset Output1 No. Selection No. Display Set Value Display digits -stage Counting Speed Switching Preset No. Selection *1 Negative Logic * Positive Logic Inpu Connection Block Diagram -0-0P Function Supply + V V DC±10% *1 Negative Logic * Positive Logic Inpu -0 *1 Negative Logic -0P * Positive Logic Inpu *1 + V DC±1% V DC±1% Terminal Number /Output Description of Functions Specifications * Count/Time-up Display Timer Display + V C/T The 1 current value of the relevant counter is added (+1) + V regardless Supply of the,,, 1, 1, 1, 1, Count input *1 + V DC±1% Counting speed 0/00-0 operation mode / 1setting mode. The current value changes by HL and Output 0, 1 1 to Hz voltage V DC±1% * LH (positive logic). Count/Time-up Current Display Value Display Setting Output 1 Timer Display + V ON: 0 to V C/T 1 + V Supply OFF: 1 V higher Counting speed OFF: 0 Hz Switched by the ON edge 1 Display 1 Set Value Display Output resistance:. kω switching input ON : 00 Hz of the power supply Setting Output 1-0P voltage selection C/T input No. 1 No. Selection B0 Display digits Set -stage Value Display On delay: 0 ms (Negative logic) The counter No. changes by the counter selection input HL and LH selection input Off delay: 0 ms ON: 0 to V (positive B1 logic). In the Preset operation mode, unused counters are not selected. OFF: is open B (timer) (Positive logic) BA Supply Selection The B0current value of the digits counter -stage designated by the counter No. is reset. If ON: 1 to. V On delay: s the B1counter No. selection Preset input and the input reset input are simultaneously *1 Negative OFF: Logic 0 to V Off delay: B (timer) V 0.1 DC±1% s input f approx. seconds, all counters are reset. * Positive Logic resistance: Inpu. kω BA -1 1,,,,, 10, 1, 1, The prediction output is output if the individual output of counters Nos. 1 to + *1 Negative Logic 1 output 1 to reaches the prediction set value. /Output response time V DC±1% * Positive Logic Inpu 0 ms (0 Hz) 10 ms (00 Hz) stop output The equipment stop set value is output if one of the counters Nos. 1 to reaches the equipment stop set value P -0P RUN output -0-0 No. display V V. kω ON when the CPU nmally operates / OFF when the CPU does not operate nmally. The counter No. selected with the counter No. selection key by the external counter No. selection input is displayed. Every time the counter counts up, the counted counter No. switches to the counted up No. (ranked by priity). Priity: stop > > Previous prediction V Output Output V Output Output Up to V DC/0.1 Output A Response time ON: After the power is supplied 1. s less OFF: *1 Negative After an Logic abnmality is detected 10 ms less * Positive Logic Inpu Notes 1) and V are connected inside the counter. ) and are connected inside the counter. Notes 1) and V are connected inside the counter. ) and are connected inside the counter.. kω Up to V DC/0.1 A -0 V Output V -0P V V -0P. kω. kω KOYO ELECTRONICS. INDUSTRIES kω CO., LTD. GENERAL CATALOG 01 V Output V Notes 1) and Output Note) V are connected and inside V are the connected counter. inside the counter. ) and are connected inside the counter. Output V Output Up to V DC/0.1 OUT A Output Latest catalog Output (free) is available online. Note) and V are connected inside the counter. Visit our website

6 No. Selection *1 Negative Logic / Controller * Positive Logic Inpu -0/1 Series Connection Block Diagram -1 *1 + V DC±1% * C/T 1 Selection B0 B1 B BA Count/Time-up Display 1 Display Set Value Display digits -stage Preset (timer) Timer Display + V Supply V DC±1% + V Output Setting Output 1 + V DC±1% *1 Negative Logic * Positive Logic Inpu P Function 1,, Terminal Number /Output Description of Functions Specifications,,, 1, 1, 1, 1, 0 1 V. kω 1,,,,, 10, 1, 1 C/T input 1 to V selection input 1 to All selection input. kω output The counting (timing) of the relevant counter (timer) is perfmed regardless of the operation mode / setting mode. - When the -0/1 is used as a counter: The current value changes when "OFF""ON". - When the -0/1 is used as a timer: Timing range voltage The timing starts when "OFF""ON". Hour 1 to, h (Negative logic) The timing continues while "ON". Minute 1 to, m ON: 0 to V The timing stops when "OFF""ON". Second 1 to, s Output Notes 1) and V are connected inside the counter. OFF: is open Output ) and are connected inside the (Positive counter. logic) The counter / timer RUN you Output want to reset is designated by three inputs (B0, B1, and B). Up to V DC/0.1 A When you want to designate all counters / timers at the time of a reset input, this input should be ON. The current value of the selected counter / timer No. becomes 0 (zero). 11 RUN output This is output if one of the counters / timers Nos. 1 to reaches the setting Output 1 (setting ) value. ON when the CPU nmally operates / OFF when the CPU does not operate nmally. Counting speed 0 Hz/00 Hz Minimum pulse width 1. ms/1 ms On delay: 0ms Off delay: 0ms V Setting Output This is output if the individual V output of counters / Note) timers IN Nos. 1 and to V are connected inside the counter. output 1 to reaches the setting OUT value. /Output response time 0 ms (0 Hz timer) 10 ms (00 Hz) ON: 1 to. V OFF: 0 to V resistance:. kω Response time ON: After the power is supplied 1. s less OFF: After an abnmality is detected 10 ms less / Timer No. display function The counter No. selected with the counter / timer No. selection key by the external selection input is displayed Default setting: If the "mode" Vkey and the Output "+" key are simultaneously pressed, the default setting mode starts Notes to initialize 1) the Common following data. 0 V: Positive Logic Setting Output (1) Selection of the counter and timer, () Setting of the counting speed and timing unit, () Prohibition/Permit selection V: of Negative the reset key, Logic and () Selection of the set value concerning the Output, output (Setting 1 setting ) Open Collect ) Output Common -1: 0 V and Internally Sht circuited. kω -1. kω V Output Notes 1) Common 0 V: Positive Logic Setting Output V: Negative Logic Output, Open Collect ) Output Common -1: 0 V and Internally Sht circuited The specifications and prices described in this catalog were valid when the catalog was issued. F the latest infmation, contact our sales persons see our website. GENERAL CATALOG 01

7 / Controller -0/1 Series General Specifications/Dimensions General Specifications (Commonly Used in -0/1 Series) Items Supply Voltage Consumption Use Ambient Temperature Stage Temperature Use / Stage Ambient Humidity Insulation Resistance Dielectric Voltage Noise Resistance Vibration Resistance Impact Resistance Case Exteri Weight Price P -0P Model Number (Accessies) Mounting bracket Specifications -0 series: V DC10% (1. to. V) -1 series: V DC1% (0. to. V) W -10 to + C -0 to +0 C (No freezing) to % RH (No condensation) 100 MΩ higher00 V DC (Between power supply terminal and input-output terminal) 00 V AC0/0 Hz 1 min (Between live parts and externally-exposed non-charged metal part) Between power supply terminals: 1 kv (Pulse width 1 μs, start-up 1 ns) Between input terminals: 00 V (Pulse width 1 μs, start-up 1 ns) Malfunction vibration: Displacement amplitude 0. mm 10 to Hz, axial directions Endurance vibration: Displacement amplitude 0. mm 10 to Hz, axial directions m/s, axial directions Munsell N- (dark gray) ABS material 0 g Price Open Open Terminal Assignment -0 Series Output Count RUN Operational Output Speed Count +V 0V OUT IN -1 Series No. 1 1 Output 1 Setting 1/ Setting Output C/T RUN N.C BA B0 Setting Output C/T Selection +V 0V OUT B1 B IN Dimensions (Unit: mm) Thickness of Mounting Plate 1 to Mounting Bracket Current Value No. Set Value Setting No. Mode Display Selection Set Square Hole GENERAL CATALOG 01 Latest catalog (free) is available online. Visit our website

No mark Time-limit SPDT (1c) A Time-limit DPDT (2c) B Time-limit SPDT (1c), Instantaneous SPDT (1c) S DIN W48 H48mm.

No mark Time-limit SPDT (1c) A Time-limit DPDT (2c) B Time-limit SPDT (1c), Instantaneous SPDT (1c) S DIN W48 H48mm. Series Digital LCD Timer DIN W48 H48mm Features Power supply : 4-4VAC 5/6Hz, 4-4VDC universal Easy to switch Up/Down mode programmable output modes and timing ranges () Selectable function by front digital