E2F. Cylindrical Proximity Sensor in Plastic Housing. Applications. Ordering Information. Sensors. Accessories (Order Separately)

Transcription

1 Cylindrical Proximity Sensor in Plastic Housing High quality full body plastic housing for high water proof requirements Polyarylate housing for light chemical resistance Applications Detection of bottle caps Warm water cleaning High humidity environment Ordering Information Sensors Shielded Model Sensing distance Output specifications M8 M12 M18 M30 1.mm 2mm mm 10mm. A different frequency type is available. (-@@; e.g.-e1). A short-circuit protection type is available. (-@Y@-3; e.g. -Y1-3) Power supply voltage: 100 to 120 VAC Accessories (Order Separately) NO Model Operating status DC 3-wire NPN -1RE1-1RE2 AC 2-wire Models -1RY1-1RY2 DC 3-wire NPN -2E1-2E2 AC 2-wire Models -2Y1-2Y2 DC 3-wire NPN -E1 -E2 AC 2-wire Models -Y1 -Y2 DC 3-wire NPN -10E1-10E2 AC 2-wire Models -10Y1-10Y2 NC D-29

2 Rating/performance Item Model Sensing distance 1. mm ±10% 2 mm ±10% mm ±10% 10 mm ±10% Setting distance 0 to 1.2 mm 0 to 1.6 mm 0 to mm 0 to 8 mm Differential distance Standard sensing object Response frequency Power supply(operating voltage range) 10% max. Ferrous metal (Sensitivity lowers with non-ferrous metals) Iron, mm Iron, mm Iron, mm Iron, mm E models: 2 khz, Y models: 2 Hz E models: 1. khz, Y models: 2 Hz E models: 12 to 2 VDC (10 to 30 VDC), ripple (p-p): 10% max. Y models: 2 to 20 VAC (20 to 26 VAC) Current consumption E models: 17 ma max. Leakage current Y models: 1.7 ma at 200 VAC Control output lamp Switching capacity Residual voltage Operating status (with sensing object approaching) E models: 200 ma max. Y models: to 100 ma E models: 600 Hz, Y models: 2 Hz E models: 00 Hz, Y models: 2 Hz E models: 200 ma max. Y models: to 300 ma E models: 2 V max. (load current: 200 ma with cable length: 2 m) Y models: Refer to the Specifications E models: (red LED) Y models: Operation indicator (red LED) E1, Y1 models: E2, Y2 models: NC Protective circuits E models: Reverse connection protection, load short-circuit protection, surge absorber Y models: ne Ambient temperature Operating/Storage: -2 C to 70 C (with no icing or condensation) Ambient humidity Operating/Storage: 3% to 9%RH Temperature influence A maximum fluctuation of ±10% max. of sensing distance at 23 C in temperature range of -2 C and 70 C Voltage influence E models: ±2.% max. of sensing distance within a range of ±1% of rated power supply voltage Y models: ±1% max. of sensing distance within a range of ±10% of rated power supply voltage Insulation resistance 0 MΩ min. (at 00 VDC) between current carry parts and case Dielectric strength E models: 1,000 VAC, 0/60 Hz for 1 min between current carry parts and case Vibration resistance 10 to Hz, 1.-mm double amplitude for 2 hours each in, Y, and Z directions Shock resistance Destruction: 1,000 m/s 2 for 10 times each in, Y, and Z directions Protective structure IEC IP67 Connection method Pre-wired models (standard length: 2 m) Weight (Packed state) Approx.0g Approx. 0 g Approx. 130 g Approx. 170 g Case Sensing Polyarylate Material surface Clamping nut Polyallylate resin Accessories Instruction manual. The response frequencies are average values measured on condition that the distance between each sensing object is twice as large as the size of the sensing object and the sensing distance set is half of the maximum sensing distance. D-30 Inductive Sensors

3 Characteristic data (typical) Sensing Distance vs. Sensing Object Sensing distance (mm) Mild s Stainl (SUS Sensing distance (mm) Brass Alum Side length of sensin -@@ Side length of sensin -10@@ Sensing distance (mm) 7 6 Sensing distance (mm) Mild steel Stainless steel (SUS30) Brass Aluminum Side length of sensi Output Circuit Diagram Side length of sensing object d (mm) Output Operating status Model Timing chart Output circuit DC 3- wire NO NC -1RE1-2E1 -E1-10E1-1RE2-2E2 -E2-10E2 (between brown Operates and black leads) Reset Output voltage H (between black and blue leads) L (between brown Operates and black leads) Reset Output voltage H (between black and blue leads) L Main circuit 100W.7kW 2.2W Brown Black Output Blue. 200 ma max. (source current). When connecting to the transistor circuit. Tr +V 0V AC 2- wire Models NO NC -1RY1-2Y1 -Y1-10Y1-1RY2-2Y2 -Y2-10Y2 Operates Reset Operates Reset Main circuit Brown Blue D-31

4 Precautions Correct Use Design Effects of Surrounding Metal Provide a minimum distance as shown in the table below between the Sensor and the surrounding metal. l d dia. D m n m l Effects of Surrounding Metal(Unit: mm) Model Item l d D m n -1R@@ @@ @@ @@ 30 0 Mounting Do not apply excessive torque when tightening any nuts. Model Tensile strength (torque) -1R@@ -2@@ 0.78 N m -@@ -10@@ 2 N m Maintenance and Inspection Do not use the AC 2-wire models (sensing surface is broken), where directly exposed to water. There is fear of an electric shock. Mutual Interference When installing two or more Sensors face-to-face or side-byside, ensure that the minimum distances given in the following table are maintained. A B Mutual Interference (Unit: mm) Model Item A B -1R@@ @@ 30 (20) 20(12) -@@ 0 (30) 3 (18) -10@@ 100(0) 70(3) Figures in parentheses are for an used in combination with an (i.e., -@@@) that is operating at a different frequency. D- Inductive Sensors

5 Dimensions (Unit: mm) DC 3-wire Models AC 2-wire Models 30 1 dia dia M8 x 1 Two, washers Vinyl-insulated round cord, 3. dia., 3 cores (0.12 dia. x 13); Standard length: 2m M8 x 1 Two, washers Vinyl-insulated round cord, 3. dia., 3 cores (0.12 dia. x 13); Standard length: 2m -2E@ -2Y@ M12 x 1 0. dia. x 3 cores; Standard length: 2m M12 x 1 0. dia. x 2 cores; Standard length: 2m -E@ -Y@ M30 x dia. x 2 cores; Standard length: 2m M18 x 1 0. dia. x 2 cores; Standard length: 2m D-33

6 M30 x dia. x 3 cores; Standard length: 2m M30 x dia. x 2 cores; Standard length: 2m Mounting Hole Dimension Model -1R@@ -2@@ -@@ -10@@ F (mm) 8.-mm dia mm dia mm dia mm dia. +0 F ALL DIMENSIS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by To convert grams into ounces, multiply by Cat.. D07E-EN-01 In the interest of product improvement, specifications are subject to change without notice. D-3 Inductive Sensors