Samtec MODS-LJ Series (LIFEJACK ) Category 5/5e Qualification
|
|
|
- Colin Theodore Cameron
- 5 years ago
- Views:
Transcription
1 Samtec MODS-LJ Series (LIFEJACK ) Category 5/5e Qualification J. Ferry, C. Arroyo Copyright 2008 Samtec, Inc Page 1
2 Summary LIFEJACK met or exceeded TIA/EIA-568-B Category 5e requirements for Insertion Loss (IL), Near-End Crosstalk (NEXT), and Far- End Crosstalk (FEXT) when the proper capacitive compensation scheme was implemented. LIFEJACK also met TIA/EIA-568-A Category 5 requirements for Return Loss (RL). Copyright 2008 Samtec, Inc Page 2
3 Results Summary NEXT IL Pair Combination TST-35 TIA/EIA-568-B.2 (MIN) Pair TST-35 TIA/EIA-568-B.2 (MAX) 1-2, , , , , , FEXT RL Pair Combination TST-35 TIA/EIA-568-B.2 (MIN) Pair TST-35 TIA/EIA-568-A (MIN) 1-2, , , , , , Copyright 2008 Samtec, Inc Page 3
4 Product Overview Outer shell Inner body Contact frame Copyright 2008 Samtec, Inc Page 4
5 Replaceable contacts The design utilizes contacts loaded into a removable frame which interface with surface pads on the pcb. The main advantage of LIFEJACK over other designs is the easily removable and replaceable contact frame by way of the Samtec extraction tool. Copyright 2008 Samtec, Inc Page 5
6 Crosstalk Compensation Scheme The fundamental idea behind crosstalk compensation is to introduce a capacitive coupling effect between the differential pairs to enhance the crosstalk rejection performance. The technique used on pcb TST-35 is controlled routing and spacing of the pcb traces to create the capacitive coupling effect. Compensation scheme Copyright 2008 Samtec, Inc Page 6
7 Test Fixture Overview - Reference Test Plug The reference test plug was created with a Tyco Electronics 8-position modular jack (p/n ) and 3 unshielded twisted-pair (UTP) wire which is Category 5e verified. The results in Table 1 show that the reference test plug met or exceeded the TIA/EIA-568-B.2 requirements. NEXT Pair Combination Test Plug TIA/EIA-568-B.2 (MIN) 1-2, , , , , , Table 1 Copyright 2008 Samtec, Inc Page 7
8 Test Fixture Overview - RL & NEXT Configuration Copyright 2008 Samtec, Inc Page 8
9 Test Fixture Overview - Insertion Loss Set-up P2 Balun Network Analyzer Same pair twisted-pair leads Test plug Lifejack Test PCB TST-35 P1 Balun Copyright 2008 Samtec, Inc Page 9
10 Insertion Loss Plot Insertion Loss - LIFEJACK & pcb TST (db) E+0 10E+6 20E+6 30E+6 40E+6 50E+6 60E+6 70E+6 80E+6 90E+6 100E+6 (Hz) pair 1-2 pair 3-6 pair 4-5 pair 7-8 LIMIT Copyright 2008 Samtec, Inc Page 10
11 Test Fixture Overview - NEXT Set-up P2 Balun Network Analyzer Different pairs twisted-pair leads Test plug Lifejack Test PCB TST-35 P1 100Ω termination resistors Balun Copyright 2008 Samtec, Inc Page 11
12 NEXT Plot Near-End Crosstalk - LIFEJACK & pcb TST (db) E+0 10E+6 20E+6 30E+6 40E+6 50E+6 60E+6 70E+6 80E+6 90E+6 100E+6 (Hz) pairs 1-2,3-6 pairs 3-6,4-5 LIMIT Copyright 2008 Samtec, Inc Page 12
13 Test Fixture Overview - FEXT Set-up P2 Balun Network Analyzer Different pairs twisted-pair leads Test plug Lifejack Test PCB TST-35 P1 Balun 100Ω termination resistors Copyright 2008 Samtec, Inc Page 13
14 FEXT Plot Far-End Crosstalk - LIFEJACK & pcb TST (db) E+0 10E+6 20E+6 30E+6 40E+6 50E+6 60E+6 70E+6 80E+6 90E+6 100E+6 (Hz) pairs 1-2,3-6 pairs 3-6,4-5 LIMIT Copyright 2008 Samtec, Inc Page 14
15 Test Fixture Overview - Return Loss Set-up P2 Balun Network Analyzer Different pairs twisted-pair leads Test plug Lifejack Test PCB TST-35 P1 100Ω termination resistors Balun Copyright 2008 Samtec, Inc Page 15
16 Return Loss Plot Return Loss - LIFEJACK & pcb TST (db) E+0 10E+6 20E+6 30E+6 40E+6 50E+6 60E+6 70E+6 80E+6 90E+6 100E+6 (Hz) pair 1-2 pair 3-6 pair 4-5 pair 7-8 Copyright 2008 Samtec, Inc Page 16
17 Test Equipment, Software, and Reference Standards Agilent Technologies, ENA Series Network Analyzer, E5071C, 9KHz 4.5GHz BH Electronics, High Frequency Network Test Baluns, , 1-350MHz BH Electronics, Precision Termination Resistors, , 100Ω +/- 1%, 1-650MHz Copyright 2008 Samtec, Inc Page 17
18 Test Equipment, Software, and Reference Standards Agilent Technologies, IntuiLink Software, version 3.0 Microsoft Excel ANSI/TIA/EIA-568-B Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components ANSI/TIA/EIA-568-A Copyright 2008 Samtec, Inc Page 18
RF Characterization Report
SMA-J-P-H-ST-MT1 Mated with: RF316-01SP1-01BJ1-0305 Description: 50-Ω SMA Board Mount Jack, Mixed Technology Samtec, Inc. 2005 All Rights Reserved Table of Contents Introduction...1 Product Description...1
PDI TEST REPORT. No.0437
ABN 21 002 065 769 PDI TEST REPORT No.0437 COMPREHENSIVE Cat 6 TRANSMISSION TESTING ON 4 Pair 5m RJ45 Patch Cord With COBLE (COB) Cat 6 RJ45 Plug for Australian Communications Laboratories Pty Ltd DATE:
High Speed Characterization Report
PCRF-064-1000-SMA-P-1 Mated with: PCIE-XXX-02-X-D-TH and SMA-J-P-X-ST-TH1 Description: Cable Assembly, Low Loss Microwave Coax, PCI Express Breakout Samtec, Inc. 2005 All Rights Reserved Table of Contents
High Speed Competitive Comparison Report. Samtec MMCX-J-P-H-ST-TH1 Mated With MMCX-P-P-H-ST-TH1 Competitor A (Mated Set) Competitor B (Mated Set)
High Speed Competitive Comparison Report Samtec MMCX-J-P-H-ST-TH1 Mated With MMCX-P-P-H-ST-TH1 Competitor A (Mated Set) Competitor B (Mated Set) REVISION DATE: January 6, 2005 TABLE OF CONTENTS Introduction...
High Speed Characterization Report
TCDL2-10-T-05.00-DP and TCDL2-10-T-10.00-DP Mated with: TMMH-110-04-X-DV and CLT-110-02-X-D Description: 2-mm Pitch Micro Flex Data Link Samtec, Inc. 2005 All Rights Reserved Table of Contents Introduction...1
High Data Rate Characterization Report
High Data Rate Characterization Report VPSTP-016-1000-01 Mated with: VRDPC-50-01-M-RA and VRDPC-50-01-M-RA Description: Plug Shielded Twisted Pair Cable Assembly, 0.8mm Pitch Samtec, Inc. 2005 All Rights
High Data Rate Characterization Report
High Data Rate Characterization Report EQRF-020-1000-T-L-SMA-P-1 Mated with: QSE-xxx-01-x-D-A and SMA-J-P-x-ST-TH1 Description: Cable Assembly, High Speed Coax, 0.8 mm Pitch Samtec, Inc. 2005 All Rights
High Data Rate Characterization Report
High Data Rate Characterization Report ERDP-013-39.37-TTR-STL-1-D Mated with: ERF8-013-05.0-S-DV-DL-L and ERM8-013-05.0-S-DV-DS-L Description: Edge Rate Twin-Ax Cable Assembly, 0.8mm Pitch Samtec, Inc.
TEST REPORT. DANAK Reg. no. 19. Electrical performance testing of: Connecting Hardware according to IEC
Page 1 of 12 2 Appendices TEST REPORT DANAK Reg. no. 19 DELTA Danish Electronics, Light & Acoustics Venlighedsvej 4 DK-2970 Hørsholm Denmark Tel. (+45) 45 86 77 22 Fax (+45) 45 86 58 98 www.delta.dk Electrical
High Speed Characterization Report
High Speed Characterization Report MMCX-P-P-H-ST-TH1 mated with MMCX-J-P-H-ST-TH1 MMCX-P-P-H-ST-MT1 mated with MMCX-J-P-H-ST-MT1 MMCX-P-P-H-ST-SM1 mated with MMCX-J-P-H-ST-SM1 MMCX-P-P-H-ST-EM1 mated with
SPICE Model Validation Report
HFEM-SE High Speed Flex Data Link Mated with: QTE-xxx-01-x-D-A QSE-xxx-01-x-D-A Description: Flex Data Link, High Speed, 0.8mm Pitch New Albany IN 47151-1147 USA SIG@samtec.com Report Revision: 9/13/2007
Independent Testing - For End User Confidence
Independent Testing - For End User Confidence ELECTRICAL TRANSMISSION PERFORMANCE TESTING OF SCREENED CATEGORY 6 ISO/IEC, EN & TIA/EIA CONNECTING HARDWARE ACCORDING TO REQUIREMENTS OF 2ND EDITION ISO/IEC
RF Characterization Report
RF178 Series Cable Assemblies RF178-2SJ1-2SJ1-35 RF178-2RP1-2RP1-35 RF178-2SP1-2SP1-36 RF178-3RP1-3RP1-36 RF178-S7RP4-S7RP4-35 RF178-S7SP4-S7SP4-35 Description: RF Cable Assembly, 5 Ohm, RG178 Cable Samtec
DELTA Test Report. Certification testing of generic cabling products: Unscreened channel, Class E, 4 connector model. Performed for Sterling
DELTA Test Report TEST Reg. no. 19 Certification testing of generic cabling products: Unscreened channel, Class E, 4 connector model Performed for Sterling DANAK-19/16909 Project no.: T213173-01 Page 1
Qualification testing of 100 ohm shielded channel, Class EA. Performed for Tyco Electronics Raychem N.V.
We help ideas meet the real world DELTA Test Report DANAK TEST Reg. no. 19 Qualification testing of 100 ohm shielded channel, Class EA Performed for Tyco Electronics Raychem N.V. DANAK-19J1636 Project
ST-CCTV-VBAC16 16-Channel Active UTP Video Receiver
INSTALLATION MANUAL ST-CCTV-VBAC16 16-Channel Active UTP Video Receiver Copyright North American Cable Equipment, Inc. 1 PACKAGE CONTENTS This package contains: One ST-CCTV-VBAC16 16-channel active UTP
RF Characterization Report
RF36 Series Cable Assemblies RF36-SJ-SJ-3 RF36-RP-RP-36 RF36-SP-SP-36 RF36-3SP-3SP-36 RF36-3RP-3RP-36 RF36-5SP-5SP-35 RF36-5BJ-5BJ-3 RF36-6BJ-6BJ-35 RF36-7SP-7SP-33 RF36-7RP-7RP-37 RF36-7BJ-7BJ-36 RF36-S7RP4-S7RP4-35
ECE 528 Understanding Power Quality
ECE 528 Understanding Power Quality http://www.ece.uidaho.edu/ee/power/ece528/ Paul Ortmann portmann@uidaho.edu 208-733-7972 (voice) Lecture 41 1 Today Wiring for communications Decibels Coupling Avoiding
ST-CCTV-VBAC8 8-Channel Active UTP Video Receiver
INSTALLATION MANUAL 8-Channel Active UTP Video Receiver Copyright North American Cable Equipment, Inc. 1 PACKAGE CONTENTS This package contains: One 8-channel active UTP video receiver One AC power cord
High Speed Characterization Report
FTSH-115-03-L-DV-A Mated With CLP-115-02-L-D-A Description: Parallel Board-to-Board, 0.050 [1.27mm] Pitch, 5.13mm (0.202 ) Stack Height Samtec, Inc. 2005 All Rights Reserved Table of Contents Connector
High Speed Characterization Report
QTH-030-01-L-D-A Mates with QSH-030-01-L-D-A Description: High Speed Ground Plane Header Board-to-Board, 0.5mm (.0197 ) Pitch, 5mm (.1969 ) Stack Height Samtec, Inc. 2005 All Rights Reserved Table of Contents
High Speed Characterization Report
HDLSP-035-2.00 Mated with: HDI6-035-01-RA-TR/HDC-035-01 Description: High Density/High Speed IO Cable Assembly Samtec, Inc. 2005 All Rights Reserved Table of Contents Introduction...1 Product Description...1
High Speed Characterization Report
SSW-1XX-22-X-D-VS Mates with TSM-1XX-1-X-DV-X Description: Surface Mount Terminal Strip,.1 [2.54mm] Pitch, 13.59mm (.535 ) Stack Height Samtec, Inc. 25 All Rights Reserved Table of Contents Connector Overview...
High Data Rate Characterization Report
High Data Rate Characterization Report EQCD-020-39.37-STR-TTL-1 EQCD-020-39.37-STR-TEU-2 Mated with: QTE-020-01-X-D-A and QSE-020-01-X-D-A Description: 0.8mm High-Speed Coax Cable Assembly Samtec, Inc.
Cable Analysis. Extracting Information from Measured Data. The Performance Leader in Hand-Held Network Tools. Fanny Mlinarsky.
Cable Analysis Extracting Information from Measured Data Fanny Mlinarsky 2-Nov-98 The Performance Leader in Hand-Held Network Tools Introduction Every cable tells a story. Cable certification measurements
High Speed Characterization Report
TMMH-115-05-L-DV-A Mated With CLT-115-02-L-D-A Description: Micro Surface Mount, Board-to Board, 2.0mm (.0787 ) Pitch, 4.77mm (0.188 ) Stack Height Samtec, Inc. 2005 All Rights Reserved Table of Contents
High Speed Characterization Report
High Speed Characterization Report HDR-108449-01-HHSC HDR-108449-02-HHSC HDR-108449-03-HHSC HDR-108449-04-HHSC FILE: HDR108449-01-04-HHSC.pdf DATE: 03-29-04 Table of Contents Introduction. 1 Product Description.
Voltage Variable Equalizer
Surface Mount Voltage Variable Equalizer 5Ω 95 to 2 MHz The Big Deal Adjustable attenuation slope Supply voltage from + to + IP3 +55 dbm typical Minimal deviation from linear loss, ±.5dB CASE STYLE: HE1354
High Speed Characterization Report
MEC1-150-02-L-D-RA1 Description: Mini Edge-Card Socket Right Angle Surface Mount, 1.0mm (.03937 ) Pitch Samtec, Inc. 2005 All Rights Reserved Table of Contents Connector Overview... 1 Connector System
Shielding Effectiveness Report
VRDPC-050-01-S-D-RA Mates with VPDP/VPLSP/VPSTP Description: Data Rate I/O Cable Assemblies Samtec, Inc. 2005 All Rights Reserved Table of Contents Product Overview... 1 Shielded Room Noise Floor Verification...
High Speed Characterization Report
QTE-020-02-L-D-A Mated With QSE-020-01-L-D-A Description: Parallel Board-to-Board, 0.8mm Pitch, 8mm (0.315 ) Stack Height Samtec, Inc. 2005 All Rights Reserved Table of Contents Connector Overview... 1
150Hz to 1MHz magnetic field coupling to a typical shielded cable above a ground plane configuration
150Hz to 1MHz magnetic field coupling to a typical shielded cable above a ground plane configuration D. A. Weston Lowfreqcablecoupling.doc 7-9-2005 The data and information contained within this report
1) The addition of TCL and ELTCTL requirements to Category 6
Subject 444 TO: SUBJECT: 455 East Trimble Road San Jose, CA 95131 July 28, 2008 Subscribers to UL s Listing and Verification Services for Communications Cable (DUZX) Revised Test and Follow-Up Service
NETWORK CONNECTIVITY SYSTEMS
NETWORK CONNECTIVITY SYSTEMS Installation Cable KS-STP Category 7 Installation Cable Certificates 10GBaseT FTP Category 6 Installation Cable UTP Category 6 Installation Cable UTP Category 5E Installation
Video Mono Audio Baluns
FEBRUARY 1998 IC443A Video Mono Audio Baluns Video Mono Audio Balun AUDIO 1 PAIR 1 (4 & 5) VIDEO 1 PAIR 4 (7 & 8) AUDIO 2 PAIR 2 (3 & 6) VIDEO 2 PAIR 3 (1 & 2) CUSTOMER SUPPORT INFORMATION Order toll-free
LVDS Flow Through Evaluation Boards. LVDS47/48EVK Revision 1.0
LVDS Flow Through Evaluation Boards LVDS47/48EVK Revision 1.0 January 2000 6.0.0 LVDS Flow Through Evaluation Boards 6.1.0 The Flow Through LVDS Evaluation Board The Flow Through LVDS Evaluation Board
Application Note 5044
HBCU-5710R 1000BASE-T Small Form Pluggable Low Voltage (3.3V) Electrical Transceiver over Category 5 Unshielded Twisted Pair Cable Characterization Report Application Note 5044 Summary The Physical Medium
High Speed Characterization Report. Contact Plating Effects on Signal Integrity Gold on Post / Gold on Tail vs. Gold on Post / Matte Tin on Tail
Contact Plating Effects on Signal Integrity Gold on Post / Gold on Tail vs. Gold on Post / Matte Tin on Tail QTE-028-01-L-D-DP-A Mated With QSE-028-01-L-D-DP-A Description: Parallel Board-to-Board, Q Pair,
Video Stereo Audio Baluns
FEBRUARY 1998 IC441A Video Stereo Audio Baluns Video Stereo Audio Balun VIDEO PAIR 4 (7 & 8) AUDIO(L) PAIR 2 (3 & 6) AUDIO(R) PAIR 3 (1 & 2) CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S. 24
COPPER + LWL RAW CABLES
COPPER + LWL RAW Twisted Pair Cables... 112 TV/SAT Cables... 116 Fiber Optic Raw Cables... 120 DIGITUS CAT 7 twisted pair installation cable 4x2xAWG23 S-FTP CAT 7 1000 MHz LSZH installation cable For installation
Chapter 12: Transmission Lines. EET-223: RF Communication Circuits Walter Lara
Chapter 12: Transmission Lines EET-223: RF Communication Circuits Walter Lara Introduction A transmission line can be defined as the conductive connections between system elements that carry signal power.
AMP NETCONNECT Category 6 System
AMP NETCONNECT Category 6 System 2 How Did We Get Here? Basic Cabling Structure Component Specifications Link/Channel Specifications Additional Structure Options EIA/TIA TSB36 EIA/TIA 568 TIA/EIA TSB40
Model 600 Switching Matrix Series Transparent Switching Matrix Modules for High-Bandwidth DSL Test Automation
Model 600 Switching Matrix Series Transparent Switching Matrix Modules for High-Bandwidth DSL Test Automation High performance transparent switching solutions designed to automate testing of VDSL2 Vectoring
PRODUCT SPECIFICATION
ipass TM 0.8 mm PITCH I/O CONNECTOR REVISION: ECR/ECN INFORMATION: EC No: UCP200-137 DATE: 200 / 02 / 08 TITLE: 1 of 14 TABLE OF CONTENTS 1.0 SCOPE 3 2.0 PRODUCT DESCRIPTION 3 2.1 PRODUCT NAME AND SERIES
Agilent PN 4395-1 Agilent 4395A Network/Spectrum/ Impedance Analyzer Silicon Investigations Repair Information - Contact Us 920-955-3693 www.siliconinvestigations.com ADSL Copper Loop Measurements Product
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Exceeds Category 5 performance
High Speed Characterization Report
PCRF-064-XXXX-EC-SMA-P-1 Mated with: PCIE-XXX-02-X-D-TH Description: PCI Express Cable Assembly, Low Loss Microwave Cable Samtec, Inc. 2005 All Rights Reserved Table of Contents Cable Assembly Overview...
Cabling Ad Hoc Cat 5e Measurements
Cabling Ad Hoc Cat 5e Measurements Larry Cohen Solarflare Communications 1 Overview Cabling Ad Hoc Test Plan Measurement One Cat 5e horizontal cable sample, four test channel configurations characterized
CAT. 5e U/UTP 4x2x24AWG/1 CCA DOUBLE SHEATH
CAT. 5e U/UTP 4x2x24AWG/1 CCA DOUBLE SHEATH FIGURE CONSTRUCTION Inner conductor CCA Φ 0.50±0.01mm Insulation Solid HDPE Φ 0.90±0.05mm Color 1 Blue & White/ Blue 2 Orange & White/ Orange 3 Green & White/
How the Braid Impedance of Instrumentation Cables Impact PI and SI Measurements
How the Braid Impedance of Instrumentation Cables Impact PI and SI Measurements Istvan Novak (*), Jim Nadolny (*), Gary Biddle (*), Ethan Koether (**), Brandon Wong (*) (*) Samtec, (**) Oracle This session
High Speed Characterization Report
ECDP-16-XX-L1-L2-2-2 Mated with: HSEC8-125-XX-XX-DV-X-XX Description: High-Speed 85Ω Differential Edge Card Cable Assembly, 30 AWG ACCELERATE TM Twinax Cable Samtec, Inc. 2005 All Rights Reserved Table
EQCD High Speed Characterization Summary
EQCD High Speed Characterization Summary PRODUCT DESCRIPTION: A length of coaxial ribbon cable is terminated to a transition PCB break-out region onto which respective connectors are soldered. Three such
The Impact of Metal Trays on Unshielded Data Cables
The Impact of Metal Trays on Unshielded Data Cables Andreas Barchanski Less Weight 10 Gbit/s Cable in a Metallic Pipe 1 Gbit/s achievable? 100 m reference length unpractical Model Curves Cable Layout
Physical Test Setup for Impulse Noise Testing
Physical Test Setup for Impulse Noise Testing Larry Cohen Overview Purpose: Use measurement results for the EM coupling (Campbell) clamp to determine a stable physical test setup for impulse noise testing.
SpaceWire Physical Layer Issues
SpaceWire Physical Layer Issues Shaune Allen September 10, 2004 ITAR SENSITIVE These items are licensed by the United States for ultimate destination European Space Agency (and related entities e.g. contractors
Actual Cable Data update
Actual Cable Data update Insertion loss, return loss, charcteristic impedance at worst case condition, propagation delay Coupling attenuation at different ageing conditions Screening attenuation at different
VVM measurement with E5061B for replacing 8508A vector voltmeter. May 2013 Agilent Technologies
VVM measurement with E5061B for replacing 8508A vector voltmeter May 2013 Agilent Technologies Overview of VVM measurement with E5061B Application discussed here Measuring the phase difference (& magnitude
Using Category 5e, 6 & 6a for Audio Applications
SBE Ennes Lecture Series 2011 Using Category 5e, 6 & 6a for Audio Applications Steve Lampen Multimedia Technology Manager Product Line Manager - Entertainment Belden 2011, Belden All rights reserved. How
High Speed Characterization Report
ESCA-XX-XX-XX.XX-1-3 Mated with: SEAF8-XX-05.0-X-XX-2-K SEAM8-XX-S02.0-X-XX-2-K Description: 0.80 mm SEARAY High-Speed/High-Density Array Cable Assembly, 34 AWG Samtec, Inc. 2005 All Rights Reserved Table
Copper Lines and High Speed
Copper Lines and High Speed Application Note 52 Line quality is no coincidence Testing transmission lines for ADSL Test Solutions with the PSM-137 Selective Level Test Set Contents Testing transmission
MICTOR. High-Speed Stacking Connector
MICTOR High-Speed Stacking Connector Electrical Performance Report for the 0.260" (6.6-mm) Stack Height Connector.......... Connector With Typical Footprint................... Connector in a System Report
Validation Report Comparison of Eye Patterns Generated By Synopsys HSPICE and the Agilent PLTS
Comparison of Eye Patterns Generated By Synopsys HSPICE and the Agilent PLTS Using: Final Inch Test/Eval Kit, Differential Pair - No Grounds Configuration, QTE-DP/QSE-DP, 5mm Stack Height (P/N FIK-QxE-04-01)
The Practical Limitations of S Parameter Measurements and the Impact on Time- Domain Simulations of High Speed Interconnects
The Practical Limitations of S Parameter Measurements and the Impact on Time- Domain Simulations of High Speed Interconnects Dennis Poulin Anritsu Company Slide 1 Outline PSU Signal Integrity Symposium
Keysight MOI for USB Type-C Connectors & Cable Assemblies Compliance Tests (Type-C to Legacy Cable Assemblies)
Revision 01.01 Jan-21, 2016 Universal Serial Bus Type-C TM Specification Revision 1.1 Keysight Method of Implementation (MOI) for USB Type-C TM Connectors and Cables Assemblies Compliance Tests Using Keysight
VHDM & VHDM-L Series. High Speed. Electrical Characterization
VHDM & VHDM-L Series High Speed Electrical Characterization HDM, VHDM & VHDM-HSD are trademarks or registered trademarks of Teradyne, Inc. Date: 2/14/2003 SCOPE 1. The scope of this document is to define
1 of 6 03/12/2012 14:56 2012-12-03 HAMEG > Products > Accessories > Probes http://www.hameg.com/186.0.html P R O B E S H Z 5 6-2 * AC/ DC Current Clamps This AC/DC Current Probe is used to measure currents
Rail-to-Rail, High Output Current Amplifier AD8397
Rail-to-Rail, High Output Current Amplifier FEATURES Dual operational amplifier Voltage feedback Wide supply range from 3 V to 24 V Rail-to-rail output Output swing to within.5 V of supply rails High linear
USB 3.1 Cable-Connector Assembly Compliance Tests. Test Solution Overview Using the Keysight E5071C ENA Option TDR. Last Update 2015/02/06
USB 3.1 Cable-Connector Assembly s Test Solution Overview Using the Keysight E5071C ENA Option TDR Last Update 015/0/06 Purpose This slide will show how to make measurements of USB 3.1 cable & connector
Keysight MOI for USB Type-C Connectors & Cable Assemblies Compliance Tests (Type-C to Legacy Cable Assemblies)
Revision 01.00 Nov-24, 2015 Universal Serial Bus Type-C TM Specification Revision 1.1 Keysight Method of Implementation (MOI) for USB Type-C TM Connectors and Cables Assemblies Compliance Tests Using Keysight
Agilent AN Balanced Circuit Measurement with an Impedance Analyzer/LCR Meter/Network Analyzer Application Note
Agilent AN 346-2 Balanced Circuit Measurement with an Impedance Analyzer/LCR Meter/Network Analyzer Application Note Introduction How a balanced circuit differs from an unbalanced circuit A balanced circuit
Bill Ham Martin Ogbuokiri. This clause specifies the electrical performance requirements for shielded and unshielded cables.
098-219r2 Prepared by: Ed Armstrong Zane Daggett Bill Ham Martin Ogbuokiri Date: 07-24-98 Revised: 09-29-98 Revised again: 10-14-98 Revised again: 12-2-98 Revised again: 01-18-99 1. REQUIREMENTS FOR SPI-3
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61935-1 Edition 3.0 2009-07 Specification for the testing of balanced and coaxial information technology cabling Part 1: Installed balanced cabling as specified in ISO/IEC 11801
Level III measurement accuracy of field testers for Twisted Pair Copper Cabling Explained in Technical Detail
Level III measurement accuracy of field testers for Twisted Pair Copper Cabling Explained in Technical Detail 1 Outline Henriecus Koeman Fluke Networks July 9, 2001 This rather technical discussion contains
T est POST OFFICE BOX 1927 CUPERTINO, CA TEL E P H ONE (408) FAX (408) ARIES ELECTRONICS
G iga T est L abs POST OFFICE BOX 1927 CUPERTINO, CA 95015 TEL E P H ONE (408) 524-2700 FAX (408) 524-2777 ARIES ELECTRONICS BGA SOCKET (0.80MM TEST CENTER PROBE CONTACT) Final Report Electrical Characterization
New Product Bulletin. Belden Digital Audio Cable. Belden Brilliance AES/EBU
New Product Bulletin NP 267 Belden Digital Audio Cable Belden Brilliance AES/EBU Digital Audio Cable, Part No. 1353A, is a robust single-pair Cat 5e patch cord that utilizes Belden s exclusive Bonded-Pair
EFFECT OF SHIELDING ON CABLE RF INGRESS MEASUREMENTS LARRY COHEN
EFFECT OF SHIELDING ON CABLE RF INGRESS MEASUREMENTS LARRY COHEN OVERVIEW Purpose: Examine the common-mode and differential RF ingress levels of 4-pair UTP, F/UTP, and F/FTP cables at an (RJ45) MDI port
Communications Integrators, Inc. June S. Wilson Street, Suite 105 Tempe, Arizona Toll Free (800) Web Site
Communications Integrators, Inc. June 2008 2625 S. Wilson Street, Suite 105 Tempe, Arizona 85282 Toll Free (800) 679-9711 Web Site www.ciinet.com Product Guide Specification Specifier Notes: This product
High Speed Characterization Report
ERCD_020_XX_TTR_TED_1_D Mated with: ERF8-020-05.0-S-DV-L Description: 0.8mm Edge Rate High Speed Coax Cable Assembly Samtec, Inc. 2005 All Rights Reserved Table of Contents Cable Assembly Overview... 1
Intelix DIGI-VGASD Installation Manual
Intelix DIGI-VGASD Installation Manual Introduction The Intelix DIGI-VGASD active balun set transmits VGA video, stereo audio, and IR or RS232 up to 350 feet over a single twisted pair cable. The balun
Application Note 5525
Using the Wafer Scale Packaged Detector in 2 to 6 GHz Applications Application Note 5525 Introduction The is a broadband directional coupler with integrated temperature compensated detector designed for
University of New Hampshire InterOperability Laboratory Gigabit Ethernet Consortium
University of New Hampshire InterOperability Laboratory Gigabit Ethernet Consortium As of June 18 th, 2003 the Gigabit Ethernet Consortium Clause 40 Physical Medium Attachment Conformance Test Suite Version
DATA TRANSMISSION. ermtiong. ermtiong
DATA TRANSMISSION Analog Transmission Analog signal transmitted without regard to content May be analog or digital data Attenuated over distance Use amplifiers to boost signal Also amplifies noise DATA
Cable Testing TELECOMMUNICATIONS AND NETWORKING
Cable Testing TELECOMMUNICATIONS AND NETWORKING Analog Signals 2 Digital Signals Square waves, like sine waves, are periodic. However, square wave graphs do not continuously vary with time. The wave holds
Agilent Accessories Selection Guide For Impedance Measurements. December 2008
Agilent Accessories Selection Guide For Impedance Measurements December 2008 Table of Contents Introduction 1 1. What are Agilent Accessories? 1 2. Types of Accessories 1 3. The Benefits of Agilent Accessories
High Speed Characterization Report
HLCD-20-XX-TD-BD-2 Mated with: LSHM-120-XX.X-X-DV-A Description: 0.50 mm Razor Beam High Speed Hermaphroditic Coax Cable Assembly Samtec, Inc. 2005 All Rights Reserved Table of Contents Cable Assembly
LVDS Owner s Manual. A General Design Guide for National s Low Voltage Differential Signaling (LVDS) Products. Moving Info with LVDS
LVDS Owner s Manual A General Design Guide for National s Low Voltage Differential Signaling (LVDS) Products Moving Info with LVDS Revision 2.0 January 2000 LVDS Evaluation Boards Chapter 6 6.0.0 LVDS
Op-Amp Simulation Part II
Op-Amp Simulation Part II EE/CS 5720/6720 This assignment continues the simulation and characterization of a simple operational amplifier. Turn in a copy of this assignment with answers in the appropriate
High Speed Characterization Report
PCIEC-XXX-XXXX-EC-EM-P Mated with: PCIE-XXX-02-X-D-TH Description: 1.00 mm PCI Express Internal Cable Assembly, 30 AWG Twinax Ribbon Cable Samtec, Inc. 2005 All Rights Reserved Table of Contents Cable
Shielding Effectiveness Report HQDP
HQDP Mates with QSH-DP, QTH-DP Description: 0.50mm 100Ω Differential 30 AWG Twinax Cable Assembly Samtec, Inc. 2005 All Rights Reserved Table of Contents Product Overview... 1 Test Overview... 1 Shielded
1000BASE-T Copper SFP Transceiver
1000BASE-T Copper SFP Transceiver Features: Operating data rate up to 1.25 Gbps Compact RJ-45 connector assembly Single 3.3V power supply and Low power dissipation Hot Pluggable 1000 BASE-T operation in
The number of layers The number and types of planes (power and/or ground) The ordering or sequence of the layers The spacing between the layers
PCB Layer Stackup PCB layer stackup (the ordering of the layers and the layer spacing) is an important factor in determining the EMC performance of a product. The following four factors are important with
How to anticipate Signal Integrity Issues: Improve my Channel Simulation by using Electromagnetic based model
How to anticipate Signal Integrity Issues: Improve my Channel Simulation by using Electromagnetic based model HSD Strategic Intent Provide the industry s premier HSD EDA software. Integration of premier
1000BASE-T1 EMC Test Specification for Common Mode Chokes
IEEE 1000BASE-T1 EMC Test Specification for Common Mode Chokes Version 1.0 Author & Company Dr. Bernd Körber, FTZ Zwickau Title 1000BASE-T1 EMC Test Specification for Common Mode Chokes Version 1.0 Date
PowerAmp Design. PowerAmp Design PAD541 COMPACT POWER OP AMP
PowerAmp Design COMPACT POWER OP AMP Rev E KEY FEATURES LOW COST HIGH VOLTAGE 00 VOLTS HIGH OUTPUT CURRENT 5 AMPS 50 WATT DISSIPATION CAPABILITY 00 WATT OUTPUT CAPABILITY 0.63 HEIGHT SIP DESIGN APPLICATIONS
DDR4 memory interface: Solving PCB design challenges
DDR4 memory interface: Solving PCB design challenges Chang Fei Yee - July 23, 2014 Introduction DDR SDRAM technology has reached its 4th generation. The DDR4 SDRAM interface achieves a maximum data rate
Demo Board LMH7220 High Speed LVDS Comparator
Demo Board LMH7220 High Speed LVDS Comparator General Description This board is designed to demonstrate the LMH7220 high speed comparator with LVDS output. The board consists of two parts; one part acts
Active CCTV Receiver Balun Installation Guide
Active CCTV Receiver Balun 500015 Installation Guide P/N: 94-000304-C SE-000266-C Copyright Notice: Copyright 2009 MuxLab Inc. All rights reserved. Printed in Canada. No part of this publication may be
CAT 5e UTP Cable: NETSET BOX [305m], indoor
![CAT 5e UTP Cable: NETSET BOX [305m], indoor](/thumbs/80/82244626.jpg "CAT 5e UTP Cable: NETSET BOX [305m], indoor")
Code: E08_05 CAT 5e UTP Cable: NETSET BOX [05m], indoor NETSET BOX UTP 5e Ethernet cable far exceeds the requirements for Category 5e twisted pair cables. View of the cable box - inside 05m of the cable.
Differential Input / Output Impedance Match SM X 5 mm Nominal Footprint Lid Symbolization (YY=year, WW=week, S=shift) 15 pf
SF1189B-1 Designed for WLAN IF Applications Low Insertion Loss 5.0 x 5.0 x 1.7 mm Suface-Mount Case Single Ended or Differential Input and Output Differential Output Complies with Directive 2002/95/EC
High Speed Digital Systems Require Advanced Probing Techniques for Logic Analyzer Debug
JEDEX 2003 Memory Futures (Track 2) High Speed Digital Systems Require Advanced Probing Techniques for Logic Analyzer Debug Brock J. LaMeres Agilent Technologies Abstract Digital systems are turning out