Differential Input / Output Impedance Match SM X 5 mm Nominal Footprint Lid Symbolization (YY=year, WW=week, S=shift) 15 pf

Size: px
Start display at page:

Download "Differential Input / Output Impedance Match SM X 5 mm Nominal Footprint Lid Symbolization (YY=year, WW=week, S=shift) 15 pf"

Transcription

1 SF1189B-1 Designed for WLAN IF Applications Low Insertion Loss 5.0 x 5.0 x 1.7 mm Suface-Mount Case Single Ended or Differential Input and Output Differential Output Complies with Directive 2002/95/EC (RoHS) Pb MHz SAW Filter Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +10 dbm Max. DC voltage between any 2 terminals 0 VDC Storage Temperature Range -40 to +85 C Suitable for lead-free soldering - Max Soldering Profile 260 C for 30 s SM Electrical Characteristics Characteristic Sym Notes Min Typ Max Units Nominal Center Frequency f C MHz Passband Insertion Loss at fc IL db 3 db Passband BW 3 1, MHz Amplitude Ripple over fc ±9.0 MHz db P-P Group Delay Variation over fc ±9.0 GDV ns P-P Rejection fc -60 to fc -40 MHz 1, 2, fc -40 to fc -22 MHz fc -22 to fc -16 MHz fc +16 to fc +22 MHz fc +22 to fc +40 MHz fc +40 to fc +60 MHz db Operating Temperature Range T A C Differential Input / Output Impedance Match External L-C Case Style SM X 5 mm Nominal Footprint Lid Symbolization (YY=year, WW=week, S=shift) 457, YYWWS Electrical Connections Connection Terminals nh 22 pf pin 3 pin 7 4:1 Port 1 Single Ended Input 3 Port 2 Differential Output 6,7 15 pf SAW Filter TOP VIEW 33 nh 50 Ground All others All Others pin 6 22 pf Notes: figure 1 RF IC 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." 5. The design, manufacturing process, and specifications of this filter are subject to change. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 7. US and international patents may apply. 8. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. 9. Copyright 1999, RF Monolithics Inc. 10. Electrostatic Sensitive Device. Observe precautions for handling. RF Monolithics, Inc. Phone: (972) Fax: (972) info@rfm.com Page 1 of 5

2 Frequency Characteristics (For Single in, Balance out Type): Note: Insertion loss of balun transformers is around -0.7dB Fig-1 S21 Response RF Monolithics, Inc. Phone: (972) Fax: (972) Page 2 of 5

3 Fig-2 Group Delay RF Monolithics, Inc. Phone: (972) Fax: (972) Page 3 of 5

4 100 REF. "B" REF MHz SAW Filter Tape and Reel Specifications Inches B Nominal Size millimeters Quantity Per Reel See Detail "A" COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao Bo Ko Pitch W 5.3 mm 5.3 mm 2.0 mm 8.0 mm 12.0 mm PIN #1 USER DIRECTION OF FEED RF Monolithics, Inc. Phone: (972) Fax: (972) info@rfm.com Page 4 of 5

5 SM Case 8-Terminal Ceramic Surface-Mount Case 5.0 X 5.0 mm Nominal Footprint Case Dimensions Dimension mm Inches Min Nom Max Min Nom Max A B C D E F G Electrical Connections Solder Pad Termination Materials Au plating uinches ( um) over uinches ( um) Ni. Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phosphorus) uinches Thick Body Pb Free Al 2 O 3 Ceramic Connection Terminals Port 1 Input 3 Port 2 Differential Output 6,7 Ground All others Single Ended Operation Return is ground Differential Operation Return is hot Dot indicates Pin 1 TOP VIEW BOTTOM VIEW B C E D 7 1 A G F RF Monolithics, Inc. Phone: (972) Fax: (972) info@rfm.com Page 5 of 5

Preliminary. Electrical Characteristics Characteristic Sym Notes Min Typ Max Units

Preliminary. Electrical Characteristics Characteristic Sym Notes Min Typ Max Units Preliminary SF1202D CDM 450 F-and RF SW Filter 3.8 x 3.8 x 1.4 mm Surface-mount Package Complies with Directive 2002/95/EC (RoHS) bsolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband

More information

1640 MHz MHz Temperature Coefficient -30 ppm/ C Operating Temperature T A C

1640 MHz MHz Temperature Coefficient -30 ppm/ C Operating Temperature T A C SF1186B-2 Designed for Front End GPS Applications Low Insertion Loss 3.0 x 3.0 x 1.3 mm Surface-Mount Case No Matching Circuit Required Complies with Directive 2002/95/EC (RoHS) Maximum Ratings at +25

More information

Pin Configuration. Surface Mount 7.00 x 5.50 x 1.24 mm

Pin Configuration. Surface Mount 7.00 x 5.50 x 1.24 mm Features For WiBro and WiMAX applications Usable bandwidth 10 MHz High attenuation operation 200 Ω Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pbfree Pb 6 MHz SAW Filter Package

More information

SAW Bandpass Filter F2G12

SAW Bandpass Filter F2G12 SAW Bandpass Filter FG Features WCDMA applications Usable bandwidth of 60 MHz No impedance matching require for operation at 50 Ω Ceramic Surface Mounted Device Package (.0 mm *.0 mm ) Singleended Operation

More information

SAW Bandpass Filter F4521

SAW Bandpass Filter F4521 Features RF bandpass filter for CDMA0 CBand Tx. Part Usable bandwidth MHz (0 MHz ~ MHz) High attenuation No matching 0Ω singleended operation Ceramic Surface Mounted Device Package (.8 mm.8 mm ) RoHS compliant

More information

Pin Configuration. Surface Mount 1.40 x 1.20 x 0.46 mm

Pin Configuration. Surface Mount 1.40 x 1.20 x 0.46 mm Features For Satellite Radio Applications Usable Bandwidth 5 MHz Low Loss Good Selectivity Ceramic Chip Scale Package (CSP) Singleended Input,, 100Ω or 200Ω Hermetic RoHS compliant (2002/95/EC), Pbfree

More information

Pin Configuration. Surface Mount 9.00 x 7.01 x 1.50 mm SMP-35B

Pin Configuration. Surface Mount 9.00 x 7.01 x 1.50 mm SMP-35B Features For broadband applications Typical 3 bandwidth of 65 High attenuation Singleended operation Ceramic Surface Mount Package (SMP) Replaces Sawtek P/N 851948 (BW 3=64 ) Hermetic RoHS compliant (2002/95/EC),

More information

Pin Configuration. Surface Mount x 6.50 x 1.75 mm SMP-75B

Pin Configuration. Surface Mount x 6.50 x 1.75 mm SMP-75B Features For broadband applications Typical 3 bandwidth of 4.9 MHz High attenuation Singleended operation Ceramic Surface Mount Package (SMP) Replaces Sawtek P/N 851551 (BW 3=4.5 MHz) Hermetic RoHS compliant

More information

Model BD3238N5050AHF. Ultra Low Profile 0404 Balun

Model BD3238N5050AHF. Ultra Low Profile 0404 Balun Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and

More information

Model B0922N7575AHF Rev B. Ultra Low Profile 0404 Balun

Model B0922N7575AHF Rev B. Ultra Low Profile 0404 Balun Model B9N7575AHF Ultra Low Profile 44 Balun 75Ω to 75Ω Balanced Description The B9N7575AHF is a low profile, low impedance mm square subminiature wideband unbalanced to balanced transformer designed for

More information

Model BD1631J50100AHF

Model BD1631J50100AHF Model BD1631J51AHF Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1631J51AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output

More information

Return loss (db) Insertion loss (db) .56±.06 TBD. GND / DC Feed 1 + RF GND 2. Unbalanced Port Balanced Port Balanced Port.

Return loss (db) Insertion loss (db) .56±.06 TBD. GND / DC Feed 1 + RF GND 2. Unbalanced Port Balanced Port Balanced Port. Model BD6N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD6N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output

More information

Pin Configuration. Surface Mount 9.10 x 4.80 x 1.24 mm SMP-35C

Pin Configuration. Surface Mount 9.10 x 4.80 x 1.24 mm SMP-35C Features For multiple applications Usable bandwidth 10 MHz Low loss High attenuation Balanced operation Ceramic Surface Mount Package (SMP) Hermetic RoHS compliant (2002/95/EC), Pbfree Pb Package Surface

More information

MHz SAW Filter

MHz SAW Filter Applications General Purpose For IF applications Product Features Typical 3 db bandwidth of 18.5 MHz Low loss High Attenuation Single-ended operation Ceramic Surface Mount Package (SMP) Small Size Dimensions:

More information

GHz BAW Filter

GHz BAW Filter Applications WiFi/ ISM notch filter to enable coexistence between WiMAX/LTE/TD-LTE & WiFi/BT/ISM radios Applicable passbands: 2.6 GHz WiMAX/LTE, 2.3 GHz WiMAX/LTE, LTE Bands 7 & 38, TD-LTE Band 40, WCS,

More information

MHz SAW Filter

MHz SAW Filter Applications Wireless Infrastructure AMPS, CDMA and TDMA General Purpose RF Filter 4G, MultiStandard Band 1 Uplink Repeaters Product Features SMP12, 3.00 x 3.00 x 1.22 mm Functional Block Diagram 60 MHz

More information

Detailed Electrical Specifications: Specifications subject to change without notice. Broadband Narrowband 25 C

Detailed Electrical Specifications: Specifications subject to change without notice. Broadband Narrowband 25 C fee Ultra Low Profile 85 Balun 75Ω to 75Ω Balanced Description The B225J7575AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on

More information

Vectron International Filter specification TFS1590 1/5

Vectron International Filter specification TFS1590 1/5 Vectron International Filter specification TFS1590 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:

More information

VI TELEFILTER Filter specification TFS 248F 1/5

VI TELEFILTER Filter specification TFS 248F 1/5 VI TELEFILTER Filter specification TFS 248F 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 200 Ω Characteristics Remark: The reference

More information

Vectron International Filter specification TFS140AV 1/5

Vectron International Filter specification TFS140AV 1/5 Vectron International Filter specification TFS140AV 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 50 Ω -78 pf Output: 95 Ω -52 pf Characteristics

More information

Top View (Near-side) Side View Bottom View (Far-side) ± ±.08. 4x.28. Orientation Marker Balanced port 1.

Top View (Near-side) Side View Bottom View (Far-side) ± ±.08. 4x.28. Orientation Marker Balanced port 1. Model BD2FAHF Ultra Low Profile 168 Balun Ω to Ω Balanced Description The BD2FAHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion

More information

Vectron International Filter specification TFS 243E 1/5

Vectron International Filter specification TFS 243E 1/5 Vectron International Filter specification TFS 243E /5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 350 Ω -3.8 pf Output: 350 Ω -3.8 pf Characteristics

More information

Vectron International Filter specification TFS1575AG 1/5

Vectron International Filter specification TFS1575AG 1/5 Vectron International Filter specification TFS1575AG 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark:

More information

MHz SAW Filter

MHz SAW Filter Applications General Purpose For IF applications Product Features Typical 1 db Bandwidth of 1.2 MHz Low loss High attenuation Single-ended operation Ceramic Surface Mount Package (SMP) Small Size Dimensions:

More information

Model BD1722J50100A00

Model BD1722J50100A00 Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1722J51A is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on next generation

More information

VI TELEFILTER Filter specification TFS 130C 1/5

VI TELEFILTER Filter specification TFS 130C 1/5 VI TELEFILTER Filter specification TFS 130C 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 130 Ω -11.6 pf Output: 86 Ω -11.8 pf Characteristics

More information

Model BD2425N50200AHF. Ultra Low Profile 0404 Balun 50Ω to 200Ω Balanced

Model BD2425N50200AHF. Ultra Low Profile 0404 Balun 50Ω to 200Ω Balanced Model BD45N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD45N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output

More information

MHz SAW Filter

MHz SAW Filter Applications Wireless Infrastructure AMPS, CDMA and TDMA General Purpose RF Filter 4G, MultiStandard UMTS Bands 1 and 10 Downlink Repeaters Product Features SMP12, 3.00 x 3.00 x 1.22 mm Functional Block

More information

Vectron International Filter specification TFS 400P 1/5

Vectron International Filter specification TFS 400P 1/5 Vectron International Filter specification TFS 400P /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 280 Ω -6, pf Output: 440 Ω -5,2 pf Characteristics

More information

Top View (Near-side) Side View Bottom View (Far-side) .89±.08. 4x.280. Orientation Marker Orientation Marker.

Top View (Near-side) Side View Bottom View (Far-side) .89±.08. 4x.280. Orientation Marker Orientation Marker. Model B2F2AHF Ultra Low Profile 168 Balun Ω to 2Ω Balanced Description The B2F2AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion

More information

Model BD4859L50100A00 Rev A

Model BD4859L50100A00 Rev A Model BD4859L51A Ultra Small Low Profile 63 Balun 5Ω to 1Ω Balanced Description The BD4859L51A is an ultra-small low profile balanced to unbalanced transformer designed for differential inputs and output

More information

Model PD0409J7575S2HF

Model PD0409J7575S2HF Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is

More information

MHz SAW Filter

MHz SAW Filter Applications Smart metering Remote meter reading wireless modules Licensed band wireless General purpose wireless Product Features Usable bandwidth 15 MHz Low loss Dimensions: 3.80 x 3.80 x 1.27 mm Singleended

More information

Vectron International Filter specification TFS 1227A 1/5

Vectron International Filter specification TFS 1227A 1/5 Vectron International Filter specification TFS 1227A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω 0 pf Output: 50 Ω 0 pf Characteristics

More information

Model PD3150J5050S2HF

Model PD3150J5050S2HF Model PD315J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD315J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD315J55S2HF

More information

Vectron International Filter specification TFS180L 1/5

Vectron International Filter specification TFS180L 1/5 Vectron International Filter specification TFS180L 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 205.51 Ω -23.24 pf Output: 141.63 Ω - 31.49

More information

Model PD0409J5050S2HF

Model PD0409J5050S2HF Model PD49JSHF Ultra Low Profile 8 Power Divider Ω to Ω Description The PD49JSHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49JSHF is ideal for

More information

Vectron International Filter specification TFS /5

Vectron International Filter specification TFS /5 Vectron International Filter specification TFS 2096 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 200 Ω -0.38 pf Output: 75 Ω Characteristics

More information

MHz SAW Filter

MHz SAW Filter Applications Base Station Infrastructure LTE Macrocells General Purpose Wireless Product Features SMP28B 7.1 x 5.51 x 1.63 mm Functional Block Diagram Usable bandwidth of 6 MHz Balanced operation High

More information

Model C1517J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler

Model C1517J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler Model C57J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C57J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. The

More information

Model PD2328J5050S2HF

Model PD2328J5050S2HF Model PD2328J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD2328J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD2328J55S2HF

More information

Data Sheet. ACFF-1024 ISM Bandpass Filter ( MHz) Description. Features. Specifications. Functional Block Diagram.

Data Sheet. ACFF-1024 ISM Bandpass Filter ( MHz) Description. Features. Specifications. Functional Block Diagram. ACFF-124 ISM Bandpass Filter (241 2482 MHz) Data Sheet Description The Avago ACFF-124 is a miniaturized Bandpass Filter designed for use in the 2.4 GHz Industrial, Scientific and Medical (ISM) band. The

More information

MHz BAW Filter

MHz BAW Filter Applications Satellite Radio antenna modules Satellite Radio devices Suitable for Automotive applications Compliant to the AECQ0 Grade 2 reliability standard CSP 1713, 1.7 X 1.3 X 6 mm Product Features

More information

Vectron International Filter specification TFS 125P 1/5

Vectron International Filter specification TFS 125P 1/5 Vectron International Filter specification TFS 125P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 115 Ω -21 pf Output: 110 Ω -35 pf Characteristics

More information

Model C0810J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler

Model C0810J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler Model C81J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C81J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. It

More information

Vectron International Filter specification TFS1255A 1/5

Vectron International Filter specification TFS1255A 1/5 Vectron International Filter specification TFS1255A 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: m Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The

More information

GHz WLAN/BT LTE Co-Existence Filter

GHz WLAN/BT LTE Co-Existence Filter Applications WiFi bandpass filter that enables the coexistence of 4G (WiMAX/LTE/TD-LTE) & WiFi signals Handsets Portable Hotspots Mobile Routers Smart Meters High-power WLAN Access Points Applicable reject

More information

Vectron International Filter specification TFS 522 1/5

Vectron International Filter specification TFS 522 1/5 Vectron International Filter specification TFS 522 1/5 Measurement condition Ambient temperature (T 0): 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:

More information

Data Sheet. ACMD-7409 Miniature PCS Band Duplexer. Features. Description. Specifications. Applications. Functional Block Diagram

Data Sheet. ACMD-7409 Miniature PCS Band Duplexer. Features. Description. Specifications. Applications. Functional Block Diagram ACMD-749 Miniature PCS Band Duplexer Data Sheet Description The Avago ACMD-749 is a miniature duplexer designed for US PCS handsets. The ACMD-749 is designed with Avago Technologies Film Bulk Acoustic

More information

Model C2327J5003AHF Rev D

Model C2327J5003AHF Rev D Model C2327J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C2327J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package.

More information

Data Sheet. ACMD-6103 Band 3 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram

Data Sheet. ACMD-6103 Band 3 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram ACMD-613 Band 3 Duplexer Data Sheet Description The Avago Technologies ACMD-613 is a highly miniaturized duplexer designed for use in LTE Band 3 (171 1785 MHz UL, 185 188 MHz DL) handsets and mobile data

More information

TELEFILTER Filter Specification TFS 141 C 1/5

TELEFILTER Filter Specification TFS 141 C 1/5 TELEFILTER Filter Specification TFS 4 C /5 Measurement condition Ambient Temperature: 23 C Input Power Level: 0 dbm Terminating Impedance at fc*: input:,25 kω // -9,4 pf output:,36 kω // -9,9 pf Characteristics

More information

TQQ MHz LTE Band 7 Uplink BAW Filter

TQQ MHz LTE Band 7 Uplink BAW Filter Applications LTE Band 7 Uplink Infrastructure Base Station General Purpose Wireless 6 Pin 3x3 mm leadless SMT Package Product Features 70 MHz Bandwidth High Attenuation Low Loss 50 Ohm Input/Output Impedance

More information

Vectron International Filter specification TFS 868P 1/5

Vectron International Filter specification TFS 868P 1/5 Vectron International Filter specification TFS 868P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 80 Ω -1.7 pf Output: 80 Ω -1.7 pf Characteristics

More information

Data Sheet. ACMD-7612 Miniature UMTS Band I Duplexer. Features. Description. Specifications. Applications. Functional Block Diagram

Data Sheet. ACMD-7612 Miniature UMTS Band I Duplexer. Features. Description. Specifications. Applications. Functional Block Diagram ACMD-7612 Miniature UMTS Band I Duplexer Data Sheet Description The Avago ACMD-7612 is a miniature duplexer designed for use in UMTS Band I handsets. Maximum Insertion Loss in the channel is only 1.5 db,

More information

Vectron International Filter specification TFS 1575AA 1/5

Vectron International Filter specification TFS 1575AA 1/5 Vectron International Filter specification TFS 1575AA 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:

More information

VI TELEFILTER Preliminary specification TFS 1575N 1/5

VI TELEFILTER Preliminary specification TFS 1575N 1/5 VI TELEFILTER Preliminary specification TFS 1575N 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The

More information

Tfs248e.doc version VI TELEFILTER Filter specification TFS 248 E 1/5. D a t a typ. Value Limit

Tfs248e.doc version VI TELEFILTER Filter specification TFS 248 E 1/5. D a t a typ. Value Limit Filter specification TFS 248 E 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances at f c *) Input: 560 Ω -5.9pF Characteristics Output: 500 Ω -6.3 pf Remark:

More information

Vectron International Filter specification TFS455D 1/5

Vectron International Filter specification TFS455D 1/5 Vectron International Filter specification TFS455D 1/5 Measurement condition Ambient temperature To: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The

More information

VI TELEFILTER Filter specification TFS 70Z 1/5

VI TELEFILTER Filter specification TFS 70Z 1/5 VI TELEFILTER Filter specification TFS 70Z /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 850 Ω -4,5 pf Output: 490 Ω -4, pf Characteristics

More information

Vectron International Filter specification TFS /5

Vectron International Filter specification TFS /5 Vectron International Filter specification TFS 2653 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 27,66 Ω -0,01 pf Output: 27,66 Ω -0,01 pf

More information

Vectron International Filter specification TFS 867A 1/5

Vectron International Filter specification TFS 867A 1/5 Vectron International Filter specification TFS 867A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:

More information

VI TELEFILTER Filter specification TFS 915D 1/5

VI TELEFILTER Filter specification TFS 915D 1/5 Filter specification TFS 915D 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The maximum attenuation

More information

/881.5 MHz SAW Duplexer

/881.5 MHz SAW Duplexer Applications General purpose wireless Femtocells Repeaters Data cards and dongles Product Features Usable bandwidth 25 MHz No matching required for operation at Ω Excellent rejection for Bluetooth and

More information

Vectron International Filter specification TFS 600 1/5

Vectron International Filter specification TFS 600 1/5 Vectron International Filter specification TFS 600 /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 270 Ω -0,8 pf Output: 285 Ω -0,8 pf Characteristics

More information

Vectron International Filter specification TFS 737 1/5

Vectron International Filter specification TFS 737 1/5 Vectron International Filter specification TFS 737 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The

More information

Vectron International Filter specification TFS /5

Vectron International Filter specification TFS /5 Vectron International Filter specification TFS 2533 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: * Input: 27,22 Ω -,32 pf Output: 27,22 Ω -,32 pf Source:

More information

Vectron International Filter specification TFS 281 1/5

Vectron International Filter specification TFS 281 1/5 Vectron International Filter specification TFS 281 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 183 Ω -12.5 pf Output: 172 Ω -12.6 pf Characteristics

More information

Vectron International Filter specification TFS 1632A 1/5

Vectron International Filter specification TFS 1632A 1/5 Vectron International Filter specification TFS 1632A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 183 Ω -0,42 pf Output: 45 Ω -0,47 pf Characteristics

More information

SAW BANDPASS FILTER. ACT PART NO.: ACTF9201_2535MHz_DCC6C

SAW BANDPASS FILTER. ACT PART NO.: ACTF9201_2535MHz_DCC6C SAW BANDPASS FILTER ACT PART NO.: ACTF9201_2535MHz_DCC6C Product Type: SAW Filter Part NO.: Customer: Customer Part NO.: ACTF9201_2535MHz_DCC6C Issued Date: PREPARED BY CHECKED BY APPROVED BY Features

More information

Data Sheet. ACMD-7402 Miniature PCS Band Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram

Data Sheet. ACMD-7402 Miniature PCS Band Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram ACMD-742 Miniature PCS Band Duplexer Data Sheet Description The Avago ACMD-742 is a miniature duplexer designed for US PCS handsets. The ACMD-742 is designed with Avago Technologies Film Bulk Acoustic

More information

Data Sheet. ACMD-6125 Band 25 Duplexer. Description. Features. Specifications, 10 C to +85 C. Applications. Functional Block Diagram

Data Sheet. ACMD-6125 Band 25 Duplexer. Description. Features. Specifications, 10 C to +85 C. Applications. Functional Block Diagram ACMD-6125 Band 25 Duplexer Data Sheet Description The Avago ACMD-6125 is a highly miniaturized duplexer designed for use in Band 25 (185.25 1914.75 MHz UL, 193.25 1994.75 MHz DL) handsets and mobile data

More information

SKY LF: 2.2 to 2.8 GHz Two-Way, 0 Degrees Power Divider

SKY LF: 2.2 to 2.8 GHz Two-Way, 0 Degrees Power Divider DATA SHEET SKY1646-381LF: 2.2 to 2.8 GHz Two-Way, Degrees Power Divider Applications TD-LTE systems Satellite communications 2.4 GHz ISM band PORT1 Features Low insertion loss:.3 db @ 2.5 GHz High isolation:

More information

Vectron International Filter specification TFS /5

Vectron International Filter specification TFS /5 Vectron International Filter specification TFS 1960 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:

More information

Vectron International Filter specification TFS1220 1/5

Vectron International Filter specification TFS1220 1/5 Vectron International Filter specification TFS1220 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 146 Ω -0.9 pf Output: 146 Ω -0.9 pf Characteristics

More information

VI TELEFILTER Filter specification TFS /5

VI TELEFILTER Filter specification TFS /5 VI TELEFILTER Filter specification TFS 1227 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The maximum

More information

Data Sheet. ACMD-6103 Band 3 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram

Data Sheet. ACMD-6103 Band 3 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram ACMD-613 Band 3 Duplexer Data Sheet Description The Avago Technologies ACMD-613 is a highly miniaturized duplexer designed for use in LTE Band 3 (171 1785 MHz UL, 185 188 MHz DL) handsets and mobile data

More information

Vectron International Filter specification TFS /5

Vectron International Filter specification TFS /5 Vectron International Filter specification TFS 1795 1/5 Measurement condition Ambient temperature: 2 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The maximum

More information

SKY LF: 20 MHz-5 GHz, 7 W SPDT Switch

SKY LF: 20 MHz-5 GHz, 7 W SPDT Switch DATA SHEET SKY13299-321LF: 2 MHz-5 GHz, 7 W SPDT Switch Applications RFC WiMAX and WLAN systems Features VCTL1 J1 VCTL2 J2 Positive voltage operation: /3 to /5 V Low insertion loss:.5 typical @ 3.5 GHz

More information

Vectron International Filter specification TFS /5

Vectron International Filter specification TFS /5 Vectron International Filter specification TFS 1575 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The

More information

TQQ MHz LTE Band 7 Uplink BAW Filter

TQQ MHz LTE Band 7 Uplink BAW Filter Applications LTE Band 7 Uplink Infrastructure Base Station General Purpose Wireless 6 Pin 3 x 3 mm leadless SMT Package Product Features Functional Block Diagram 70 MHz Bandwidth High Attenuation Low Loss

More information

TQQ MHz LTE Band 3 Uplink BAW Filter

TQQ MHz LTE Band 3 Uplink BAW Filter Applications LTE Band 3 Uplink Infrastructure Base Station General Purpose Wireless 6 Pin 3 x 3 mm leadless SMT Package Product Features Functional Block Diagram 75 MHz Bandwidth High Attenuation Low Loss

More information

VI TELEFILTER Filter specification TFS /5

VI TELEFILTER Filter specification TFS /5 VI TELEFILTER Filter specification TFS 2100 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark: The maximum

More information

Data Sheet. ACMD-6307 LTE Band 7 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram

Data Sheet. ACMD-6307 LTE Band 7 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram ACMD-637 LTE Band 7 Duplexer Data Sheet Description The Avago ACMD-637 is a highly miniaturized duplexer designed for use in LTE Band 7 (25 257 MHz UL, 262 269 MHz DL) handsets and mobile data terminals.

More information

VI TELEFILTER Filter specification TFS 230 1/5

VI TELEFILTER Filter specification TFS 230 1/5 VI TELEFILTER Filter specification TFS 230 1/5 Measurement Condition Ambient Temperature: 23 C Input Power Level: 0 dbm Terminating impedances *: for input: 1,95 kω // -5,0 pf for output: 1,67 kω // -5,3

More information

TQQ7399 DC 2700 MHz Through Line

TQQ7399 DC 2700 MHz Through Line Applications General Purpose Wireless RF Bypass Paths Microwave Radio Test & Measurement Scientific Instruments Product Features 6 Pin 3 x 3 mm leadless SMT Package Functional Block Diagram DC 2700 MHz

More information

QPQ1237TR7. LTE B3/B7 BAW Diplexer (75MHz/70MHz) Product Overview. Key Features. Functional Block Diagram. Applications.

QPQ1237TR7. LTE B3/B7 BAW Diplexer (75MHz/70MHz) Product Overview. Key Features. Functional Block Diagram. Applications. LTE B3/B7 BAW Diplexer (75MHz/7MHz) Product Overview The is a high performance Bulk Acoustic Wave (BAW) Duplexer designed for Band 3 uplink and Band 7 uplink applications. The provides low insertion loss

More information

Vectron International Filter specification TFS /5

Vectron International Filter specification TFS /5 Vectron International Filter specification TFS 1226 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 338 Ω -1.6 pf Output: 338 Ω -1.6 pf Characteristics

More information

VI TELEFILTER Filter Specification TFS 70U - 1/5

VI TELEFILTER Filter Specification TFS 70U - 1/5 Filter Specification TFS 70U - 1/5 1. Measurement condition : Ambient temperature T A: 23 C. Input power level: 0 dbm. Terminating impedances in f c : for input: 50 Ω 0 pf. for output: 50 Ω 0 pf. 2. Characteristics

More information

Vectron International Filter specification TFS 500 1/5

Vectron International Filter specification TFS 500 1/5 Vectron International Filter specification TFS 500 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 415 Ω -1 pf Output: 415 Ω -1 pf External

More information

Model DC4859J5005AHF. Ultra Low Profile db Directional Coupler

Model DC4859J5005AHF. Ultra Low Profile db Directional Coupler Model DC4859J55AHF Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Features: 47-59 MHz Mean Coupling 5dB Ultra Low Insertion

More information

Vectron International Filter specification TFS 942G 1/5

Vectron International Filter specification TFS 942G 1/5 Vectron International Filter specification TFS 942G 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The

More information

Model 2425B50-50C Rev. A

Model 2425B50-50C Rev. A rit Model 2425B50-50C Xinger Balun 50Ω to 100Ω Balanced Description The 2425B50-50C is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations

More information

Insertion loss (db) Return Loss (db) 4x x x Orientation Marker Denotes Pin Location

Insertion loss (db) Return Loss (db) 4x x x Orientation Marker Denotes Pin Location Model DC1722J55AHF Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Description The DC1722J55AHF is a low cost, low profile

More information

Vectron International Diplexer specification TDX1227 1/7

Vectron International Diplexer specification TDX1227 1/7 Vectron International Diplexer specification TDX1227 1/7 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: 50 Ohm (all ports) Characteristics D a t a L

More information

GHz WLAN/BT LTE Co-Existence Filter

GHz WLAN/BT LTE Co-Existence Filter Applications WiFi bandpass filter that enables the coexistence of 3G/4G/LTE/TDLTE & WiFi signals Highpower WLAN Access Points and Small Cells Bandedge filtering of WiFi signal emissions Smart Meters and

More information

SKY LF: GHz GaAs SPDT Switch

SKY LF: GHz GaAs SPDT Switch DATA SHEET SKY13321-36LF:.1-3. GHz GaAs SPDT Switch Applications Higher power applications with excellent linearity performance RFC WiMAX systems J2 J1 Features Positive voltage control ( to 1.8 V) High

More information

A 2.4 GHz WLAN/BTLTE Co-Existence Filter

A 2.4 GHz WLAN/BTLTE Co-Existence Filter Applications Automotive Telematics and Infotainment 2.4 GHz ISM Applications & Smart Energy WiFi bandpass filter that enables the coexistence of 3G/4G/LTE/TD-LTE & WiFi signals WLAN systems (Higher power

More information

GHz WLAN/BT LTE Co-Existence Filter

GHz WLAN/BT LTE Co-Existence Filter Applications WiFi bandpass filter that enables the coexistence of 4G (WiMAX/LTE/TDLTE) & WiFi signals Handsets Portable Hotspots Mobile Routers Smart Meters Highpower WLAN Access Points Applicable reject

More information

SKY LF: 0.35 to 4.0 GHz Two-Bit Digital Attenuator

SKY LF: 0.35 to 4.0 GHz Two-Bit Digital Attenuator DATA SHEET SKY12355-337LF: 0.35 to 4.0 GHz Two-Bit Digital Attenuator Applications Cellular infrastructure Wireless receivers RF1 Features Positive voltage operation with integrated decoder CTL1 6 Broadband

More information