Lasers should be fiber coupled using - Single mode fiber with angled FC connector Solid state 532 nm,/514 nm, 633, 785nm, 20 mw

Transcription

1

2 Monochromator Aberration-corrected, Raman imaging with error-correction based on closed feedback loop of scanner. 3D imaging and depth profile based on confocal configuration with Raman Depth resolution better than 750 nm High throughput spectrometer with focal length 300 mm or more Fiber coupled to microscope. Spectrometer with >60% 532nm.Spectral resolution: Better than 0.5 cm-1 / pixel for VIS-NIR Lasers. Spatial Resolution: Diffraction limited spatial resolution 250 nm or better with 532nm laser. Scan to scan repeatability should be better than 0.05cm-1. Raman Spectral range: 80 cm cm-1. Suitable filters for 532 nm and 785 nm to suppress Rayleigh background. Motorized Grating Stage with minimal of three gratings gr/mm,1800 gr/mm & 2400 gr/mm Detector Detector Optional Detectors Laser Laser Number of mountable Microscope Sample observation LED Confocal optical Objective lens Sample stage Imaging measurement QRI high speed Computer Software Standard program Imaging program Correction program Additional attachments SNOM Attachments AFM Attachment Tip Enhanced Raman Spectroscopy: (TERS) Raman imaging System Heating,Cooling Stage Air-cooled Peltier CCD detector (Max. -60 C), 1650 x 200 pixel, 16 μm x 16 μm, Visible to NIR Visible high-sensitivity type, NIR high-sensitivity type, High-resolution type, InGaAs, EMCCD etc. Lasers should be fiber coupled using - Single mode fiber with angled FC connector Solid state 532 nm,/514 nm, 633, 785nm, 20 mw 3 lasers High resolution CMOS camera (3 million pixel) White LED Source True Confocal 5, 10x, 20, 50x, objectives (Long working distance type, UV type, NIR type) Automatic XYZ stage with auto-focus function Automatic stage imaging with auto focus, XYZ 0.1 μm step, 3D imaging High speed data acquisition, High speed imaging measurement 2.5GHz, 8 GB RAM, 1000 GB HD, DVD RW or better,8gb RAM, 1000GB HD,DVD RW or better, Keyboard and mouse, Windows 7 64bit, 27 monitor, (2560*1440) Microscope spectra measurement, Validation, Spectra analysis, Micro imaging analysis, Wave number correction, Sensitivity correction, Fluorescence correction Sample search function, Multiple focus function, Focused view, 3-D structure observation, Peak calculation, PCA imaging, Refractive index correction Standard, Auto-fluorescence correction, Sensitivity correction, Wave number correction AFM,SNOM ( Scanning Near-field Optical Microscopy), TERS Cantilever based SNOM, SNOM in both transmission and collection geometries should be possible. Optional Reflection Mode SNOM, Resolution ~ 60 nm. Single photon counting photo multiplier tube, Quantum efficiency 450nm, dark count rate < 200cps as detector. Suitable cantilevers 10 Nos with aperture < 90 nm should be supplied with the system Piezo-driven scanner with 100 µm x 100 µm x 20 µm scan range, Scan hardware linearized with closed-loop feedback, Dynamic position correction, software corrects position of beam spot on sample from capacitive feedback from the piezo-stage. Position accuracy <1 nm in x and y direction, <0.2 nm in the z direction. System should be able to do TERS studies. Extension for Raman and AFM at the same position (TERS-ready) Raman imaging with error-correction based on closed feedback loop of scanner. 3D imaging and depth profile based on confocal configuration with Raman Depth resolution better than 750 nm From -196 degc to 600 deg C Others

3 Documentation To be provided with the bid quotation, ISO9001 quality certification, CE marking confirmation, Installation documentation, To be provided with the system Operation and maintenance Manuals on CD, and OEM manuals. Supplier Supplier must confirm that they have installed atleast 10 systems in India, 15 Worldwide. Also, they have to supply and install the whole system by 6 week from the date of purchase order.any additional advanced features of the equipment and accessories can be quoted with full details and specifications as optional. Installation and training on site for 2 users Required. UPS and Anti Vibration table should be quoted. All essential and recommended spares should be informed and should be quoted. Parts should be available for Next 5 years Necessary pre-installation advice including power requirement should be enclosed along with the offer. Preferable Principal company Service facility in India. Warranty one year with two year Extended Warranty should be quoted. System should be field upgradable with Profilometry, Highly precise time-resolved measurement of fluorescence and luminescence Warranty At least 3 years warranty must be provided; also software up gradation procedure should be continued. Also vendor should comply for 5 years service. Anti-vibration table (air source for anti-vibration table: nitrogen gas or air source, secondary pressure MPa) active range ~ Hz, >1000Hz passive Approximate budget 1.75 cr inr ( inr inr for heating and cooling stage) GENERAL TERMS & CONDITIONS PLEASE SPECIFICALLY INDICATE THE FOLLOWING POINTS IN YOUR QUOTATIONS AND COMPLY THE TERMS AS MENTIONED HERE UNDER:- (1) TENDERS ARE INVITED COMPLYING THE REQUIREMENT FOR TENDERAS DETAILED IN THE TENDER SPECIFICATION TO BE SUBMITTED IN THE COMPANY S/FIRM S (2) LETTER HEAD NEATLY PRINTED/TYPED DULY SIGNED BY AUTHORIZED PERSON WITH THE SEAL OF THE BIDDERS.ALL ENVELOPS CONTAINING THE TENDER SHOULD BE PROPERLY SEALED.SEPARATE SEALED ENVELOPES SHOULD BE USED FOR TECHNICAL AND PRICE BID AND INDICATIONTO THE IREFFECT MAY PLEASE BE SUPERSCRIBED ON THE ENVELOP. (3) TECHNICAL CATALOGUE/LEAFLET SHOULD BE ENCLOSED WITHOUT FAIL.. (4) PLEASE CONFIRM WHETHER YOU ARE AUTHORISED TO QUOTEON BE HALF OF YOUR PRINCIPAL SAND IF SO,PLEASE ENCLOSE A COPY OF SUCH AUTHORISATION WITH YOUR QUOTATION. (5) PRICEBIDS:PRICES ARE TO BE QUOTED FOR DOOR DELIVERY AT IIT KHARAGPUR, CLEARLY SHOWING THE GST RATE. ALL PRICES SHOULD BE QUOTED ONLY IN INDIAN RUPEES. (6) PERIOD OF VALIDITY: BIDS SHALL REMAIN VALID FOR ACCEPTANCE FOR A PERIOD OF 120 DAYS FROM THE DATE OF OPENING. (7) SCOPE OF SUPPLY:SHOULD INCLUDE

4 FREEINSTALLATIONANDCOMMISSIONING (8) PAYMENTTERMS A) 90% PAYMENT SHALL BE RELEASED AFTER RECEIPT OF GOODS IN GOOD ORDER AND CONDITION AND SUCCESSFUL INSTALLATION, THEREAFTER CERTICATE FROM THE CONCERNED HEAD OF THE DEPARTMENT AND BALANCE 10% PAYMENT SHALL BE RELEASED AFTHER SUBMISSION OF PERFORMANCE BANK GUARANTEE (PBG) AMOUNTING TO 10% OF THE PURCHASE ORDER VALUE. THE PBG WILL BE DRAWN FROM ANY NATIONAL/COMMERCIAL BANK VALID FOR THE WARRANTY PERIOD PLUS SIXTY DAYS.. B) ENSUREMENTIONING (i) (ii) BANKDETAILS OF THEBENEFICIARY AND PAN NUMBER FULLNAMEANDADDRESS OF THEBENEFICIARY ON WHOM ORDERHAS TO BE PLACED (9) WHETHER ANY EXPORT LICENCE IS REQUIRED FROM YOUR GOVERNMENT, IF SO, PLEASE CONFIRM WITH DETAILS. (10) COUNTRY OF ORIGIN OF THE GOODS IS TO BE MENTIONED. (11) THE EXERCISE DUTY EXEMPTION (10/97)/CUSTOM DUTY EXEMPTION (51/96) CERTIFICATE WILL BE PROVIDED BY THE INSTITUTE ON REQUEST BY THE VENDOR. (12) LIQUIDATEDDAMAGES:THESTORESSHOULDBEDELIVERED/DISPATCHEDTODESTINATIONANDREAD YFOROPERATIONNOTLATERTHANTHEDELIVERYDATESPECIFIED.IFTHESUPPLIERFAILSTODELIVERANY ORALLTHESTORESORPERFORMTHESERVICEBYTHESPECIFIEDDATE,LIQUIDATEDDAMAGESAT1%PERM ONTHORPARTTHEREOFINRESPECTOFTHEVALUEOFSTORESWILLBEDEDUCTEDFROMTHECONTRACTP RICESUBJECTTOAMAXIMUMOF5%.ALTERNATIVELY,THEORDERWILLBECANCELLEDANDTHEUNDELIVER EDSTORESPURCHASEDFROMELSEWHEREATTHERISKANDEXPENSEOFSUPPLIER. (13) PATENTRIGHTS:THESUPPLIERSHALLINDEMNIFYTHEPURCHASEAGAINSTALLTHIRDPARTYCLAIMSOFI NFRINGEMENTOFPATENT,TRADEMARKORINDUSTRIALDESIGNRIGHTSARISINGFROMUSEOFTHEGOODS ORANYPARTTHEREOFIN INDIA. (14) ONLY THOSE BIDDERS WHOSE BIDS HAVE BEEN TECHNICALLY FOUND ACCEPTABLE WILL BE INVITED FOR PARTICIPATION IN THE PRICEBID. (15) THOSE BIDDERS WHO DO NOT RECEIVE ANY COMMUNICATION FOR PARTICIPATION IN PRICEBID OPENING MEETING MAY PRESUME THAT THEIR BID HAS NOT BE ENACCEPTED BY THE INSTITUTE. (16) CONDITIONALOFFER WILL NOT BE ACCEPTED. (17) LATETENDERSI.E.TENDERRECEIVEDAFTERTHEDUEDATEANDTIMEOFSUBMISSIONASMENTIONEDABOV ESHALLNOTBEACCEPTED. (18) BIDDERS TO ENCLOSE THE FOLLOWING DOCUMENTS:- A) CURRENT INCOME TAX AND SALESTAXCLEARANCECERTIFICATES AND PAN NO. B) BANKER SSOLVENCY CERTIFICATE C) SUMMARY OF AUDITEDSTATEMENT OF ACCOUNTS FOR THE LASTTHREEYEARS D) CUSTOMERSATISFACTIONCERTIFICATE FROM ONESUCHORGANIZATIONIS TO BEATTACHED

5 WITH THE TECHNICAL BID. E) NAME AND ADDRESS OF MINIMUMTHREECLIENTS TO WHOM SUCH EQUIPMENTHAVE BEEN SUPPLIED IN THELAST THREE YEARSSHOULD BE MENTIONED. (19) WARRANTY / GUARANTEE: THIS COMPREHENSIVE ONSITE WARRANTY / GUARANTEE SHALL REMAIN VALID FOR 60 MONTHS AFTER THE GOODS (OR ANY PORTION THEREOF AS THE CASE MAY BE) HAVE BEEN DELIVERED AND COMMISSIONED TOTHE FINAL DESTINATION INDICATED IN THE CONTRACT. (20) THE INSTITUTE DOES NOT BIND ITSELF TO OFFER ANY EXPLANATION TO THOSE BIDDERS WHOSE TECHNICAL BID HAS NOT BEEN FOUND ACCEPTABLE BY THE EVALUATION COMMITTEE OF THE INSTITUTE. (21) ALL TENDERS(UNLESS OTHERWISE SPECIFIED) ARE TO BE SUBMITTED /HANDED OVERTO THE HEAD, DEPARTMENT OF ELECTRONICS AND ELECTRICAL COMMUNICATION ENGINEERING, INDIAN INSTITUTE OF TECHNOLOGY, KHARAGPUR IMPORTANT (a) IIT Kharagpur authority may acceptor reject any or all the bids in part or in full without assigning any reason and does not bind itself to accept the lowest bid. The Institute at its discretion may change the quantity / upgrade the criteria/ drop any item or part thereof at any time before placing the Purchase Order. (b) Promptly make arrangements for repair and /or replacement of any damaged item(s) irrespective of settlement of claim. (c) In case of any dispute, the decision of the Institute authority shall be final and binding on the bidders. (d) For any query pertaining to this bid document correspondence may be addressed to Prof. T.K.Bhattacharya Dept. of E&ECE, IIT Kharagpur. 1) Please Note that the Institute remains closed during Saturdays & Sundays and all specified Institute holidays. 2) Fax, Tender will not be accepted. 3) The General Terms and Conditions as stated above relate to supply of stores /equipment /assets etc.and for specific service other terms and conditions of the Institute will apply.

6 ANNEXURE VI FORMAT FOR PRICE BID Format to be filled up by the Agency TenderNo. Dated 1. Name of Tender: 2. Name of Firm/Bidder:. 3. Address: 4. Phone/ Fax/ Mobile/ SL.NO. (a) Description (b) Unit Basic Price (inrs.) (c ) GST (in Rs.) (d) Total(All Inclusive)(inRs.) (e=c+d) 1. Brand: Model : Signature of the bidder with seal

7