2-jaw non-selfcentering angular pneumatic sprue gripper series PB. Pinza pneumatica per materozze, angolare non autocentrante a due griffe serie PB
|
|
|
- Berenice Wade
- 6 years ago
- Views:
Transcription
1 PB Pinza pneumatica per materozze, angolare non autocentrante a due griffe serie PB Grasso alimentare FDA-H1. (*) 2-jaw non-selfcentering angular pneumatic sprue gripper series PB FDA-H1 food-grade grease (*) Il sensore SS3N203-G è incluso The sensor SS3N203-G is included (*) NEW NEW (*) (*) (*) (*) HNBR HNBR PB-0008 PB-0009 PB-0013 PB-0014 PB-001 PB-0017 PB-0140 PB-010 PB-0160 PB-0170 PB-01 PB-0181 PB-0182 PB-0187 Fluido Medium Pressione di esercizio Pressure range Temperatura di esercizio Temperature range Corsa (±2 ) Stroke Aria compressa filtrata, lubrificata / non lubrificata Filtered, lubricated / non lubricated compressed air 2. 8 bar 60 C. 2x10 2x10 2x1 2x1 2x16 2x1 2x1 2x1 2x1 2x1 2x1 2x1 2x1 2x1 Coppia di serraggio per griffa in chiusura a 6 bar Closing gripping torque at 6 bar each jaw 60 Coppia per griffa in apertura (a 6 bar) Opening gripping torque (at 6 bar) each jaw 2 2 (2 ) Frequenza max funzionamento continuativo Maximum working frequency Consumo d aria per ciclo Cycle air consumption Tempo di chiusura senza carico Closing time without load Peso Weight 3 Hz cm 3 cm 3 cm 3 cm 3 cm 3 cm 3 cm 3 cm 3 cm 3 cm 3 cm 3 cm 3 cm 3 cm s 1 g 2 g g 0 g 0 g 4 g 7 g 7 g 7 g 0 g 60 g 7 g 7 g 7 g 18 Pinze non autocentranti per materozze / Non-selfcentering sprue grippers
2 PB-0008 Alesaggio: 8mm. PB-0008 Piston bore: 8mm. Ø Pinze non autocentranti per materozze / Non-selfcentering sprue grippers 19
3 PB-0009 Alesaggio: 8mm. Sensore sulla griffa. PB-0009 Piston bore: 8mm. Sensor on the jaw. SS3N203-G R R max. 21 Ø. 10 = = 12. R Pinze non autocentranti per materozze / Non-selfcentering sprue grippers
4 PB-0013 Sensore sulla griffa. PB-0013 Sensor on the jaw. (N 2) Ø4.3mm Ø.mm Sensore serie SS SS series sensor SS3N203-G Tastatore in acciaio Steel probe Pinze non autocentranti per materozze / Non-selfcentering sprue grippers 161
5 PB-0014 PB-0014 (N 2) Ø4.3mm Ø.mm 162 Pinze non autocentranti per materozze / Non-selfcentering sprue grippers
6 PB-001 A doppio effetto con molla in apertura. PB-001 Double-acting with opening spring. (N 2) Ø4.3mm Pinze non autocentranti per materozze / Non-selfcentering sprue grippers 163
7 PB-0017 Griffe personalizzabili. PB-0017 Custom jaws. Ø.mm (N 2) Ø4.3mm 164 Pinze non autocentranti per materozze / Non-selfcentering sprue grippers
8 PB-0140 Griffe in acciaio. PB-0140 Steel jaws. (N 2) Ø4.3mm Ø.mm Griffe in acciaio con zigrinatura spinata (90 ) Steel jaws with diamond knurl (90 ) Pinze non autocentranti per materozze / Non-selfcentering sprue grippers 16
9 PB-010 Griffe oscillanti per materozze coniche. PB-010 Swiveling jaws for conical sprues. (N 2) Ø4.3mm Ø.mm 166 Pinze non autocentranti per materozze / Non-selfcentering sprue grippers
10 PB-0160 Griffe in acciaio. PB-0160 Steel jaws. Ø 30 Ø Ø Ø.mm R Ø (N 2) Ø4.3mm 29 Griffe in acciaio Steel jaws Pinze non autocentranti per materozze / Non-selfcentering sprue grippers 167
11 PB-0170 Pastiglia in gomma (HNBR) per contatto morbido. PB-0170 Rubber (HNBR) pads for a soft contact R Ø (N 2) Ø4.3mm Ø.mm 2.3 HNBR Pinze non autocentranti per materozze / Non-selfcentering sprue grippers
12 PB-01 Sensore sulla griffa. Tastatore in acciaio. PB-01 Sensor on the jaw. Steel probe. R0. 21 = = 16 = = 4 29 Ø Ø30 1 = = (N 2) Ø Sensore serie SS SS series sensor SS3N203-G 23 Tastatore in acciaio Steel probe Pinze non autocentranti per materozze / Non-selfcentering sprue grippers 169
13 PB-0181 Sensore sulla griffa. Griffa e tastatore in acciaio. PB-0181 Sensor on the jaw. Steel jaw and probe. R0. 21 = = 16 = = 4 29 Ø Ø30 1 = = (N 2) Ø4.3 Sensore serie SS SS series sensor SS3N203-G Griffa in acciaio Steel jaw Tastatore in acciaio Steel probe Pinze non autocentranti per materozze / Non-selfcentering sprue grippers
14 PB-0182 Sensore sulla griffa. Griffa e tastatore in acciaio. PB-0182 Sensor on the jaw. Steel jaw and probe. R0. C L 21 C L Ø (N 2) Ø Sensore serie SS SS series sensor SS3N203-G C L 1 Ø30 Tastatore in acciaio Steel probe 23 Ø4 1.8 Griffa in acciaio Steel jaw Pinze non autocentranti per materozze / Non-selfcentering sprue grippers
15 PB PB-0187 Pastiglia in gomma (HNBR) per contatto morbido. Sensore sulla griffa. PB-0187 Rubber (HNBR) pads for a soft contact. Sensor on the jaw. C L 21 C L 16 R Ø. Ø R Ø Sensore serie SS SS series sensor SS3N203-G C L HNBR Pinze non autocentranti per materozze / Non-selfcentering sprue grippers
16 Adattatore per pinze PB Adapter fitting for PB grippers G1/8 ch 13mm Peso Weight AF10G18M 18 g R12 CL 14 Esempi di utilizzo / Application examples RG N01-01 O-Ring AF10G18M PB Pinze non autocentranti per materozze / Non-selfcentering sprue grippers 173
2-jaw parallel self-centering pneumatic gripper (series PE)
PE -jaw parallel self-centering pneumatic gripper (series PE) Double acting (single acting upon request for PE-5... and PE-5...). High efficiency and reliability due to the lack of driving parts. Wide
2-jaw self centering rocking pneumatic gripper (series GW)
2-jaw self centering rocking pneumatic gripper (series ) Double acting. Long life and reliability, maintenance free. Various options for fastening. Optional proximity magnetic sensors. Spring closed (-NC)
CYLINDERS ISO STAINLESS STEEL VERINS ISO INOX CILINDRI ISO INOX
The cylinders of the MX series are made of stainless steel. They are ideal for the food industry and are available with three different bores: --. The cape heads are fixed to the tube through a process
2-jaw parallel self-centering pneumatic gripper (series GM)
GM -jaw parallel self-centering pneumatic gripper (series GM) Double acting. The rugged construction lends itself to heavy duty applications for a trouble free long life without maintenance. Wide choice
L40. Pneumatic linear slide L40
L40 Pneumatic linear slide High stiffness and deflection resistance. Up to 30kg on the carrier. Guidance with recirculating ball-bearings. Exclusive belt drive system. Hydraulic shock-absorbers on the
SGP-S - Compact Parallel Gripper
11: Double acting Patented backlash adjusting system. High performance in a compact size. The rugged construction lends itself to heavy-duty applications for a trouble-free long life without maintenance.
Price $ $ $ Filtered compressed air, lubricated or non-lubricated
2-JAW SELF-CENTERING RADIAL PNEUMATIC GRIPPER (SERIES PS-P) Double-acting radial motion. The gripping force is constant through the entire stroke (from 0 to 90, both opening and closing). Lightweight:
2-JAW SELF-CENTERING RADIAL PNEUMATIC GRIPPER (SERIES PS)
PS 2-JAW SELF-CENTERING RADIAL PNEUMATIC GRIPPER (SERIES PS) Double-acting radial motion. The gripping force is constant throughout the entire stroke (from 0 to 90, both opening and closing). Lightweight:
Gripper pneumatici B32 Pneumatic grippers B32
Caratteristiche principali: - Corpo in acciaio - Irreversibilità della posizione di bloccaggio - Bracci in acciaio tipo A e B - 4 tipologie di attacchi - Cilindro pneumatico alesaggio 32 mm - 2 fori di
2-JAW SELF-CENTERING PARALLEL PNEUMATIC GRIPPER (SERIES S)
2-JAW ELF-CENTERING PARALLEL PNEUMATIC GRIPPER (ERIE ) Hanover IF Design Award Winner. Modular with Gimapick ystem. Double-acting (single-acting on request). Bottom porting is available. High gripping
Angular Grippers- Cam Driven Series
RA SERIES Angular Grippers- Cam Driven Series. General Purpose: This style gripper is widely used in the industry and is a rugged design that supplies very high grip force for its size. Cost Effective:
WM en. Zero point clamping system SPEEDY airtec 1
SPEEDY airtec 1 GO! Maximum productivity Using the zero point clamping system SPEEDY classic you will increase your productivity to a maximum. Adjustment and checking processes are no longer necessary
DM series M12 cylindrical photoelectric sensors
series M cylindrical photoelectric sensors warranty features warranty Models diffuse reflection, polarized and throughbeam Local and remote in function Lighton / Darkon selectable outputs IP67 protection
PROFILE SYSTEM by. l architettura e il design hanno sempre bisogno di nuove risposte, PROFIL SYSTEM è una di queste.
PROFILE SYSTEM l architettura e il design hanno sempre bisogno di nuove risposte, PROFIL SYSTEM è una di queste. Architecture and design always need news answers. The PROFIL SYSTEM is one of them 36 NUOVI
DUGARD EAGLE 200HT / 200MC
DUGARD EAGLE 00HT / 00MC Slant Bed, High Precision CNC Lathes EAGLE 00HT 5 Slant Bed Heavy duty cast construction allowing optimum chip clearance Rigid, High Precision Spindle Unit Model Eagle 00HT The
Straghtening rods / Aste raddrizzanti
Straghtening rods / Straightening staffs with aluminium or plastic frames con coperture in alluminio o in plastica 187 Straghtening rods Straghtening rods / POSITIONING AND OPERATION / POSIZIONAMENTO E
Parallel Grippers 1.1. For more information call us at: DESTACO or Fax: Visit us on the Internet at:
Parallel Grippers PARALLEL GRIPPERS 1.1 PARALLEL GRIPPERS 1.2 Parallel Motion Gripper DPP Precision Series Precision parallel gripper featuring our DIRECTCONNECT mounting pattern Dual-V precision roller
Chuck adapters Top jaws T-nuts Grippers Gripping force meter Grease Accessories
Chuck adapters Top jaws T-nuts Grippers Gripping force meter Grease Accessories Chuck adapters DIN 55026/ISO-A 702/1 Mounting adapters on short taper spindle noses direct and indirect mounting reduction
Regular Jaw Grippers PGS10 Series
For LTG1010 backward compatibility see PGS11 on page 7. All PGS11 configuration data is the same as PGS10 Jaw Angle (Diagram A) Sensor Type (Diagram B) PGS10R XX XXX XXX X Port Orientation (Diagram D)
DM series M12 cylindrical photoelectric sensors
series photoelectric sensors warranty features warranty Models diffuse reflection, polarized and throughbeam Local and remote in function Lighton / Darkon selectable outputs IP67 protection degree Multifunction
SCS Directory Registro SCS
page/pagina 1 of/di 10 Edition: SCS 115/F METRON Measurement SA Head of laboratory : Angelo Capone Calibration Laboratory Deputy : Alessandro Capone Via Luserte Sud 7 Responsible for QA : Angelo Capone
MATEC 30 HV 3000 / NC
Description of the machine MATEC 30 HV 3000 / NC 1. Company 1.1. General company details Name of the company KISTNER GmbH & Co.KG Adress Industriestraße 7-9 95349 Thurnau Phone +49 9228 987-0 E-Mail info@maschinen-kistner.de
DURA-GRIP PH-SERIES. Parallel Grippers PH-30 / PH-40 PH-50 / PH-60 PH-70
PHSERIES PH Series of Part Placement Devices is designed to provide a low cost gripping unit for use on transfer mechanisms. These air operated units grip parts internally or externally offering the designer
Parallel Grippers- Low Profile Series
RPL SERIES 1.9 Parallel Grippers- Low Profile Series Precision applications: Preloaded Dual-V roller bearings eliminate side play for excellent part position repeatability. Repeatable grip force: Low friction
Appendix for QTD1864 Installation of Analog Position Sensor ML312345
PHDinEurope GmbH 2015 Appendix for QTD1864 Read the instructions before beginning any work! PHDinEurope GmbH Zum Carl-Alexander-Park 6 52499 Baesweiler, GERMANY Telephone: +49 (0) 2401 619 77 0 Fax: +49
SPIDA SAW OPERATIONS MANUAL
SPIDA SAW OPERATIONS MANUAL CM SERIAL NUMBER. OCTOBER 2000 CONTENTS Page description 1.) Contents 2.) Safety First 3.) CM Overview 4.) CM Specifications 5.) CM Installation 6.) CM Operation Setting the
Parallel Grippers- DPG DIRECTCONNECT Modular Series
1.84 Parallel Grippers- DPG DIRECTCONNECT Modular Series Mounting Information: Grippers can be mounted & operated in any orientation G Technical Specifications: Pneumatic Specifications Imperial Metric
STANDARD "T" HANDLE CLAMPS
STANDARD "T" HANDLE CLAMPS Standard "T" Handles 401 1" 405 2" 410 3" 420 6" 430 9" 440 12" Multi-purpose clamps combine the best features of ordinary "C" and parallel clamps. Free-floating jaws adjust
RPE Parallel Gripper- Electric Gripper Series
1.14 RPE Parallel Gripper- Electric Gripper Series Failsafe Operation: Spring closed feature allows for full grip force during power off conditions. Electrically Actuated: Requires simple 24VDC pulsed
Type A - Clamping force axially applied to the clamping edge. Extending and simultaneous lowering/clamping
Wedge clamp, double-acting, type A for dies with straight clamping edge Type A - Clamping force axially applied to the clamping edge Application: safe clamping of dies with straight clamping edge for clamping
Overview Grinding Applications
GRINDING 14E Overview Grinding Applications SRG Workpieces High precision grinding Steady Rests Grinding diameter Ø 20-85 mm Camshafts Crankshafts Shafts Chapter 1 Fine adjustment of the grinding center
Multi-axis milling/turning system IMTA 320 T2 320 T3. Interaction Milling Turning Application
Multi-axis milling/turning system IMTA 320 T2 320 T3 Interaction Milling Turning Application T e c h n i c a l D a t a s h e e t The consistent 75 step bed design allows the near rectangular arrangement
Tubi, raccordi e utensili Pipes, connectors and tools
Tubi, raccordi e utensili Pipes, connectors and tools Nastro isolante adesivo Adhesive insulating tape Nastro adesivo in Alluminio Aluminium adhesive tape NFA 12 p NFG 12 p NAL30 5 p NAR50 8 p Dimensioni
Pantastar. What makes the Pantastar different? One machine for top and crease. Finishing systems. Save 50% floor space
Finishing systems What makes the Pantastar different? One machine for top and crease. Save 50% floor space A 30 pieces/hr with one single unskilled operator A Pantastar Pantastar A full-feature topper
Climax Globe Valve Grinding Machines for conical seats
Climax Globe Valve Grinding Machines for conical seats Model Numbers:VM2050C, VM2100C, VM2150C Valve Seat Diameter Range: 0.4-6.0 (10mm-150mm) On Site grinding of globe valves with conical seats Easy to
IST-KIT-UR-G Page 1 of 9 KIT-UR-G REVISIONS
IST-KIT-UR-G Page 1 of 9 MOUNTING INSTRUCTIONS AND OPERATING MANUAL KIT-UR-G REVISIONS DATE REVISION MAIN CHANGES 2017/10/17 Edition A First release 2017/11/23 Edition B Replaced jaws screws (old VITE-016,
DUGARD. DUGARD Machine. Dugard 100 / 100P Slant Bed, High Precision CNC Lathes. Machine Tools That Create Solutions Since 1939.
DUGARD Machine Tools That Create Solutions Since 1939 / 100P Slant Bed, High Precision CNC Lathes DUGARD Machine Tools www.dugard.com sales@dugard.com 01273 73226 30m/min Rapids, X & Z Axes Linear Guideways
FNL-220Y / 220SY / 200LS Series CNC Turning-Milling Machines Linear Way
RICH WELL 206.0 Dimensions R450 E FNL-220Y / 220SY / 200LS Series CNC Turning-Milling Machines Linear Way 20 C D Chip conveyor 092 H G B 46 575 A F Unit:mm A B C D E F G H FNL220LSY/FNL220LY 952 2946 2700
Efficient workholding. Collet Chucks Mandrels Collets
TM Efficient workholding ollet hucks Mandrels ollets Index ollet huck Index of Klamp Products ollet hucks Q & Series Page 3 Quick hange ollet hucks QRL Series Page 4-7 Short Series ollet hucks RS Series
IPS ROCK BITS CATALOG
IPS ROCK BITS CATALOG 2016-2017 Bearing series Content Features of Bearing Series Baleros series X - (Sellado journal, ¾ a 17 ½ ) Baleros series M - (Sellado journal:motor de Fondo, ¾ a 15 ½ ) Baleros
Meccanismi per porte pieghevoli. Equipments for folding doors
Serie 3100 Serie 2500 Meccanismi per porte pieghevoli Equipments for folding doors Serie 3100 Serie 2500 serie 2500 SERIE 2500 Meccanismo per porta pieghevole a 2 pannelli, e apertura con maniglia tradizionale.
Air-supply elements. Air-supply elements MGE Flanged plate (p. 5-3) M12-1/4" (p. 5-4) Longitudinal end connector (p.
Air-supply elements MGE 13.0 5-1 Air-supply elements 1 2 3 4 5 6 7 8 Flanged plate (p. 5-3) Connection piece (p. 5-4) Connection screw fitting -1/4" (p. 5-4) Longitudinal end connector (p. 5-5) 9 11 12
Tightening automation. Only excellent solutions. : New automatic screw feeding system
Tightening automation. Only excellent solutions. : New automatic screw feeding system CA A air screwdriver with forward bit stroke CA T air screwdriver with telescopic device New automatic screw feeding
Perfect sawing. The complete FEIN program for sawing: Jigsaws P Hacksaws P With the FEIN sabre saw through thick and thin with ease.
FEIN Sawing 222 Perfect sawing. FEIN Jigsaws are characterised by their high performance under tough operating conditions. They saw vertically and horizontally in metal, wood and plastics (including fibreglass).
Air-supply elements. 5-2 MGE 13.1 Air-supply elements. 45x90. 45x90 (p. 2 41) Rexroth strut profiles can be used as compressed-air
5-2 MGE 13.1 Air-supply elements (p. 2 41) Air-supply elements Rexroth strut profiles can be used as compressed-air 19584 L L 2N L 3NVS (p. 2 40) 009732 L 7,9 cm 2 leads and reservoirs. The hollow chambers
TWIN ROD CYLINDERS 6 CONTENTS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG TWIN ROD CYLINDERS6 CONTENTS TWIN ROD CYLINDERS 6 Features 745 Specifications/Order Codes 747 Inner Construction and Major Parts 748 Dimensions
Product Information. Deburring spindle FDB-AC
Product Information FDB-AC FDB-AC Compliant. Reliable. Flexible. FDB-AC deburring spindle Flexible deburring spindle for use in robotic applications Field of application Standard solution for flexible
Jaw chuck B-Top3 STANDARD CHUCKS. 215 Variant. Jaw chuck B-Top3. Technical data. Size. B-Top3
STANDARD CHUCKS. Technical data A AJ DH AI AT AW T BQ AS Size 215 ariant B-Top3 Concentricity [mm] Max. clamping force [kn] Max. axial drawtube force [kn] RPM n max. [1/min.] Stroke per jaw [mm] Ø Capacity
OIL AND GAS. Clamping technology for crude oil and natural gas industries
OIL AND GAS Clamping technology for crude oil and natural gas industries CRUDE OIL AND NATURAL GAS - THE ENERGY OF TODAY RÖHM is the specialist for clamping technology with a wide product range, unrivaled
OPERATIONAL AND MAINTENANCE MANUAL. Drilling machine ProDrill 20 INSTRUCTION MANUAL FOR USE AND MAINTENANCE
MOD 14-02 OPERATIONAL AND MAINTENANCE MANUAL Rev. 0 Data 01/02/2012 Drilling machine ProDrill 20 INSTRUCTION MANUAL FOR USE AND MAINTENANCE TABLE OF CONTENTS TECHNICAL SPECIFICATIONS 2 USE 4 MAINTENANCE
MATEC 30 HV KISTNER GmbH & Co. KG. Industriestraße 7-9 D Thurnau Tel. (+49)
MATEC 30 HV 2000 KISTNER GmbH & Co. KG Industriestraße 7-9 D-95349 Thurnau Tel. (+49) 9228 987-0 info@maschinen-kistner.de www.maschinen-kistner.de MACHINE INFO Manufacturer Type Year of manufacture Control
DUGARD. DUGARD Machine. Dugard 300 Slant Bed High Precision CNC Lathe. Machine Tools That Create Solutions Since Tools
DUGARD Machine Tools That Create Solutions Since 1939 Dugard 300 Slant Bed High Precision CNC Lathe DUGARD Machine Tools www.dugard.com sales@dugard.com 01273 732286 Outstanding features that guarantee
Speed sensor DSA series 12
Speed sensor DSA series 12 RE 95133 Edition: 01.2015 Replaces: 07.2014 Hall-effect sensor for contactless speed measuring For installation in axial piston units Two versions With two frequency signals
FBL-250Y/320Y/SY Series. CNC Turning-Milling Machines Linear/Box Way
FNLY/2Y/SY Series FBLY/2Y/SY Series CNC TurningMilling Machines Linear/Box Way Multifunctional Turning and Milling Excellence FNLY/2Y/SY Linear Way Series FBLY/2Y/SY Box Way Series CNC TurningMilling Machines
WORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
MECHANIC VISES VERSATILE, RUGGED AND BUILT WITH YOU IN MIND A B
wiltontool.com Wilton is committed to being a supplier you can depend on for the epitome of quality, innovation and service. This isn t just a statement to make us sound good it s a reality that has been
DUGARD. Machine Tools Since Dugard 300 Slant Bed High Precision CNC Lathe.
DUGARD Machine Tools Since 1939 Dugard 300 Slant Bed High Precision CNC Lathe www.dugard.com Dugard 300 Series Outstanding features that guarantee faster, more accurate turning and lower production costs
CUSTOM STRIPMASTER AND CUSTOM STRIPMASTER LITE WIRE STRIPPERS
CUSTOM STRIPMASTER AND CUSTOM STRIPMASTER LITE WIRE STRIPPERS UNIQUE BLADE DESIGN ONE-STEP SPRING ACTION STURDY METAL FRAME IDEALIND.COM CUSTOM STRIPMASTER WIRE STRIPPERS The Custom Stripmaster Wire Stripper
.. 8. 2. 9. 22. 0.. 2.. 2. 2.... 28. 29.... 8. 9. PBL Universal Ball-Lock Power Castings or forgings can be.d. or I.D. clamped Grips on taper up to 0 Jaws pivot up to to grip on uneven surfaces Ideal for
COMPACT CLAMPS FOR WORKHOLDING APPLICATIONS
COMPACT CLAMPS FOR WORKHOLDING APPLICATIONS Ideal for robotic and end effector applications ORDERING DATA: GRM1 FLANGE JAW STYLE F INDEX: Ordering Data Page 2 Benefits Page 3 Dimensions Page 4 Jaw Rotation
Hydraulic Clamping Systems
Hydraulic Clamping Systems Hydraulic Swivel clamps, double action Operating pressure max. 250 bar Hydraulic swivel clamps are particularly designed for applications which require high clamping forces and
5-Axis Machine Tools from SMW-AUTOBLOK
-Axis Machine Tools from SMW-AUTOBLOK -Axis Machine Tools ensures the following advantages: Ideal suitable for OP 10 use Jaws with SinterGrip clamping inserts for clamping of workpieces with lowest depth
n e m Apertura professionale verso l'alto per vetri piani lineari Sistema 082 Professional lift up opening for flat linear glasses System 082
Apertura professionale verso l'alto per vetri piani lineari Sistema 082 Professional lift up opening for flat linear glasses System 082 n e m N 0 E A R srls 12.2018 082/01 n e m N 0 E A R srls 800 (Max)
DATA SHEET DEA GLOBAL EXTRA
DATA SHEET DEA GLOBAL extra Specifications Specifications according to ISO 10360-2 and ISO 10360-4 Standard DEA GLOBAL extra, TESASTAR-m Models Strokes Extended Temperature Range 15 30 C TESASTAR-m/TESASTAR-p,
TCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES
TCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES BASIC PARAMETERS 3-guideways bed Max. torque on spindle Nm Max. weight of workpiece between centre 30 tonnes Turning length 3,000
Parallel Long Stroke Gripper RGP
Original: 27.03.2014 Assembly- and Operating Instructions: Parallel Long Stroke Gripper RGP Description Page Description of the parallel gripper 2 Safety information and guidelines for use 4 Mounting,
All dimensions shown as in [mm]
![All dimensions shown as in [mm]](/thumbs/87/95827464.jpg "All dimensions shown as in [mm]")
Page 1 of 19 Tensile / Pull Wedge grips All dimensions shown as in [mm] Heavy-duty grips designed for a range of tensile testing requirements up to 2,000 lbf [10 kn]. Self-tightening stainless steel serrated
Tightening automation. Only excellent solutions. Multispindle tightening units
Tightening automation. Only excellent solutions. Multispindle tightening units Fiam multispindle tightening units: all needs will be satisfied Tightening simultaneously and accurately more screws, bolts,
KDL 30M HORIZONTAL TURNING CENTER
HORIZONTAL TURNING CENTER with LIVE TOOLING KEY FEATURES 12 Chuck BOX Ways Turret Style Tooling Slant Bed Construction Live Tooling Maximum Swing 610mm (24.02 ) Maximum Cutting Diameter 420mm (16.54 )
5-Axis Machine Tools from SMW-AUTOBLOK
5-Axis Machine Tools from SMW-AUTOBLOK 5-Axis Machine Tools ensures the following advantages: Ideal suitable for OP 10 use ST5-2G also suitable for OP 20 use Jaws with SinterGrip clamping inserts for clamping
HORIZONTAL BORING GRUNDOMAT PNEUMATIC PIERCING TOOL DO IT RIGHT THE FIRST TIME
GRUNDOMAT PNEUMATIC PIERCING TOOL HORIZONTAL BORING DO IT RIGHT THE FIRST TIME Superior accuracy puts the Grundomat piercing tool in a class by itself. The Grundomat performs accurate horizontal bores
PARALLEL PNEUMATIC GRIPPERS MINIATURE SERIES
PRE PEUI GRIPPERS IIURE SERIES DESIGED FOR IFOD OUIG RP Series Small Part Handling RP-1 Precision Gripping Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning ccuracy
DUGARD. DUGARD Machine. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. Machine Tools That Create Solutions Since 1939.
DUGARD Machine ools hat Create Solutions Since 1939 Dugard 00H / 00MC Slant Bed, High recision CNC Lathes DUGARD Machine ools www.dugard.com sales@dugard.com 0173 73 DUGARD 00H/00MC CNC Lathes Hydraulic
Automatic Capacitor Testing System Model AE 1000RD
TESTING & SORTING Automatic Capacitor Testing System Model AE 1000RD Features Designed to perform DC short clearing by applying upto 5000V DC gradually under different stations, followed by measuring the
CATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS
CATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS FERM PROFESSIONAL TOUGH TOOLS FOR THE PROFESSIONAL FERM, founded in 1965, is one of the leading European power tool brands. Our headquarters is based in
ortodonzia orthodontics
pinze pliers ZLH001 # U - Universal cm. 15 Per fili fino a 0,036 (0,91 mm) For wires up to 0.036 (0.91 mm) ZLH201 # U3 - Universal cm. 16 Per fili fino a 0,036 (0,91 mm) For wires up to 0.036 (0.91 mm)
RPP/ RPP-A. Assembly- and Operating Instructions: Original: Description
Original: 27.03.2014 Assembly- and Operating Instructions:, pneumatically actuated RPP/ RPP-A Description Page Comparison: RPP/ RPP-A 2 Overview: RPP/ RPP-A 4 Safety Precautions and Guidelines for Use
Rotary actuators Rotary wing drives Series RAK. Brochure
rochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:
Models 14CFS91-38NL 14CFS93-38NL 14CSL CNL92-51
Grinders and Burs Drills 300/440/660W Models 14CFS91-38NL 14CFS93-38NL 14CSL97-51 14CNL91-51 14CNL92-51 = ready for oilless use Series Model-no. Free Power Air Noise Air Recommended Standard accessories
Bernoulli grippers OGGB
Key features General Purpose Benefits Applications The Bernoulli gripper OGGB is ideally suited to transporting thin, extremely delicate and brittle workpieces. Minimised workpiece contact, gentle workpiece
BIG BORE 2G chucks BB-N-EXL2G BB-AZ2G BB-FZA2G BB-EXL-SC2G
Clamping of pipe with IG ORE 2G chucks -Z2G -FZ2G -EXL-C2G IG ORE elf centering Extra long jaw stroke Jaw jogging IG ORE -Z2G elf centering or compensating Extra long jaw stroke afety features: : Pressure
DUGARD. DUGARD Machine. DUGARD CNC Lathes. Dugard 220LY / 220LSY CNC Turning and Milling Centres. Expertise with Imagination.
DUGARD Expertise with Imagination DUGARD CNC Lathes Dugard 220LY / 220LSY CNC Turning and Milling Centres Multi-axis lathes with linear ways and sub-spindle option DUGARD Machine Tools www.dugard.com sales@dugard.com
FCL-140/A FCL-200/S/HT/MC FCL-300/P/MC. Linear Way Series CNC Lathes
FCL0/A FCL0/S/HT/MC FCL0/P/MC Linear Way Series CNC Lathes Linear Way Series CNC Lathes FCL0/A FCL0/S/HT/MC FCL0/P/MC Contents 0 Controller 03 FCL0/A Series Construction & Spindle Torque 0 FCL0 System
NEW RÖHM VICE NOVELTIES. RKE-M and RZM (size 92)
NEW RÖHM VICE NOVELTIES RKE-M and RZM (size 92) NC-COMPACT-VICE RKE-M MANUALLY OPERATED APPLICATION Particularly suitable for use on machining centers and palletisers. TYPE Clamping system mechanical without
RZP / RZP-A. Assembly- and Operating Instructions: Original: Description
Original: 27.03.2014 ssembly- and Operating Instructions:, pneumatically actuated RZP / RZP- Description Page Comparison: RZP/ RZP- 2 Overview: RZP/ RZP- 4 Safety Precautions and Guidelines for Use 6 Description
Design and Analysis of Self Centering Steady Rest for Supercut-6 CNC Turning Machine Using CAD & FEA
Design and Analysis of Self Centering Steady Rest for Supercut-6 CNC Turning Machine Using CAD & FEA 1 Satish G. Bahaley, 2 Rajendra L. Bharambe Prof. Ram Meghe Institute of Technology & Research, Badnera,
EMCal ALICE modules stacking / assembly
EMCal ALICE modules stacking / assembly User s Manual / Tutorial Manoel Dialinas updated 15.02.2009 The EMCal module Put assembly fixture dust clean, and all surfaces degreased. 1. Check guide rods system
Precision Chucks for Improved Accuracy and Increased Productivity
Precision Workholding Technology Precision Chucks for Improved Accuracy and Increased Productivity Precision Air Chucks (Self Contained Design) MicroCentric Precision Air Chucks feature a patented open
CATALOGUE CLASSIC Series THE POWER OF EXPERIENCE
CATALOGUE CLASSIC Series THE POWER OF EXPERIENCE ESD safe All JBC products comply with EC regulations, and the ESD recommendations. 2 More than 80 years of experience have placed JBC at the technological
Sistema di connessione LED Chip Array / LED Chip array connection system
Sistema di connessione LED Chip Array / LED Chip array connection system Cod. 034170 CONNETTORE LED BRIDGELUX ES ARRAY 25,8X22,8MM BIANCO Dimensioni chip array Chip array dimension Materiale corpo Body
linear/swivel clamp CLR Operating instructions e [ ]
![linear/swivel clamp CLR Operating instructions e [ ]](/thumbs/76/73629285.jpg "linear/swivel clamp CLR Operating instructions e [ ]")
linear/swivel clamp CLR en Operating instructions 8072624 2017-05e [8072626] Translation of the original instructions CLR-EN Identification of hazards and instructions on how to prevent them: Danger Immediate
95/96 LAVAGGI PER PARRUCCHIERI WASHES FOR HAIRDRESSERS
95/9 LAVAGGI PER PARRUCCHIERI WASHES FOR HAIRDRESSERS Lavaggio ADONE ad posto con lavandino PRINCE Washing ADONE place with PRINCE basin 950 95 0 Lavaggio ADONE a posti con lavandini PRINCE Washing ADONE
Technical Manual ETP-TECHNO. Content
Technical Manual ETP-TECHNO Content Technical parts description...2 Mounting/dismantling tips...3 Design examples/tips...5 Technical data...8 Machining in the flange...9 FAQ...10 Spare parts...11 1 Technical
Diva Air Vetro. Sliding system for glass doors with amortised stopper Scorrevoli per porte in vetro con fermo ammortizzato
Diva Air Vetro Sliding system for glass doors with amortised stopper Scorrevoli per porte in vetro con fermo ammortizzato Diva Air Vetro Sliding system for glass doors with amortised stopper Sistema scorrevole
utensilimanuali01 9HAMMERS AND CHISELS handtoolscatalogue01 MARTELLI E SCALPELLI
MARTELLI E SCALPELLI 9HAMMERS AND CHISELS utensilimanuali01 handtoolscatalogue01 Martelli e scalpelli Hammers and chisels 5082 Martello per meccanici 5082 Hammer for mechanics Martello per meccanici, modello
GILDEMEISTER AS16 - AS20 - GS20 - GM20
CAMME STANDARD PER SLITTE RADIALI STANDARD CAMS FOR CROSS SLIDES CAMME STANDARD PER SLITTE ASSIALI STANDARD CAMS FOR AXIAL SLIDES POS. 1 08.29.105 08.29.106 08.29.107 08.29.111 08.29.117 16.29.301 POS.
Serie FQ / FQ Series
Sensori fotoelettrici M18 serie FQ con corpo corto M18 photoelectric sensors FQ Series with short body Modelli a diffusione diretta a corta e lunga distanza, polarizzati e a barriera / diffuse models with
HD HD HD HD HD
HD2205.2 - HD2206.2 - HD2256.2 - HD2259.2 - HD22569.2 Introduction The instrument series HD2205.2, HD2206.2, HD2256.2, HD2259.2, and HD2569.2 is made up of bench top instruments for electrochemical measures:
The DeltaGrip System. Safety and Operating Instructions. Trigger. Air Supply Connection. Handle Assembly. Air Line Assembly.
The DeltaGrip System Safety and Operating Instructions Trigger Air Supply Connection Handle Assembly Air Line Assembly Punch Die Pneumatic Diaphragm Assembly Shackle, Pin & Jam Nut Jaw Frame Shoulder Screw
N Connector Installation Kits
N Connector Installation s ONE KIT PROVIDES EVERYTHING FOR LMR-400 N CONNECTOR INSTALLATION Refill part numbers in table below Each kit contains: Assembly Instructions Professional Grade Crimp Tool and