TECHNICAL RIDER PA SYSTEM

Transcription

1 Hutsol Aleksandr Phone: (Viber/WhatsApp) Soundengineer Oleg Davidov Phone: +380 (66) Lighting engineer/designer TECHNICAL RIDER Dear event managers! All technical issues must be clarified with sound engineer not later than 3 days before the show. Technical rider must be agreed necessarily with letter approval of all items in the list to . Negotiations are mandatory. Dear technical crew!!! Please read tech rider carefully. All the details below are very important and are necessary to carry out!!! PA SYSTEM Preferred PA Systems are: D&B Audiotechnik, Meyer Sound, L Acoustics. Capacity of PA should be according to the sizes of the venue. Pre discussion of configuration and power rating of the system is necessary and very important for each venue. For large venues (stadiums etc.) is necessary to provide delay towers, side fills to achieve flat and same (as main) SPL & frequency response in every place (point) inside the venue. During sound check & the show qualified system engineers must be at FOH position. InFills (Front Fills) are really necessary for each venue! PA System must be configured with separate Subwoofer Buss & Main (L+R) Buss. FOH CONSOLE Preferred consoles are: Avid Venue Profile (Waves Plugins are required, not less than 3 DSP cards!) or Yamaha CL5. Using and offering any other consoles is strictly prohibited. PA System processing control must be placed at FOH mixing position. Talkback & Light bulb on the console are necessary. With CL5 you should provide WIFI access point and ipad for remote control. The mixing console should be placed in the center of the venue with same distance from left and right speakers. All other placing options like under the stairs (balcony), under the stage or on it s side are strictly prohibited. Near the FOH console must be some place for MacBook Pro (13 ) and mini jack cable connected to console (for PA test). For Profile & CL5 we ve got ready shows and presets. If several bands perform on one stage during the show, it s necessary to provide separate (individual) console for LOBODA band only!

2 WIRELESS SYSTEMS 3 х Shure UR (2 back Vocs girls,1 voc Loboda Spare); 4 х In-Ear Systems. Preferred wireless systems are: Shure PSM1000/900, Sennheiser G3. With outboard directional antennas, boosters & splitters. All In-Ear systems must be the same brand and model. We bring our own wireless system Shure AXT (Voc Lead Loboda) H MHz, and In-Ear system Shure PSM1000 (INEAR LEAD VOC) L MHz. It s necessary to provide some place for all this wireless devices (mounted in case 2U 19 ). Very important to place it on the stage, not behind screen or in some other room! All wireless systems must be placed near the stage box! Local sound engineers must have a list of radio frequencies which are already used, to prevent any interferences. Local sound crew or event managers must certify bands of frequency range for our wireless systems. 10 x AA Batteries DURACELL Industrial (ONLY!) DRUMS TAMA Starclassic or DW Collector's ONLY Maple KICK DRUM 20 х 18 (HEAD Evans GMAD Clean); SNARE DRUM 14 х 6 (HEAD Evans Onyx); KICK PEDAL (DW5000/9000) TOM 10 /8 (HEAD Evans G2 Clear); TOM 12 /9 (HEAD Evans G2 Clear); FLOOR TOM 14 /14 (HEAD Evans G2 Clear); FLOOR TOM 16 /16 (HEAD Evans G2 Clear); CYMBAL STANDS 6 PCS; CYMBAL SET - Crash 16, Crash 18, Ride 20, Hi-hat 14, Splash 8'' (Zildjian A, K custom); HI-HAT STAND; SNARE STAND; DRUM THRONE; DRUM KEY; 3 x Di-Boxes for Bass Drum Trigger and SPDSX!!! Drums should be placed on riser podium with size 3x3 meters with carpet. All drum heads must be new! Drum set must be isolated with plexi glass drum shield, height (not less than) 2 meters. Drum shield must be clean and without any damages or scratches. If several bands perform on one stage during the show, it s necessary to provide separate (individual) drum set for LOBODA band only!

3 GUITAR GEAR BASS GEAR 1 x GUITAR AMP - Mesa Boogie Rectifier ONLY; 1 x GUITAR CABINET 4X12 - Mesa Boogie ONLY; 1 x Footswitch; 1 x GUITAR STAND; 4 x Jack>Jack (6.3 ) cable; 2 x Sennheiser MD421. Guitar Cabinet should be turned away from audience to the back of the stage. 1 x Ampeg SVT 2 or 4; 1 x Cabinet 8x10 ; 1 x Di-Box; 1 x Shure Beta 52; 1 x GUITAR STAND; 1 x Jack>Jack (6.3 ) cable; 2 x 9v DURACELL Batteries; 1 x Shure sm58 (inside Kick Drum). Connects to bass pedal board for side chain control, thru YOUR XLR to JACK (6.3 ) ADAPTER! KEYBOARD GEAR 2 х KEY STANDS (X-type); 6 х Di-Box PlayBack connection; 2 х Di-Box Keyboard; 6 x Jack>Jack (6.3 ) cables (Short cables, length less 1.2 meters); 1 x Mini Jack (3.5 )>2 Jacks (6.3 ) 8 Di-Boxes must be labeled accordingly to input list (see below). This Di-Boxes must be used by LOBODA band only! MIC/DI LIST 14 x Di-Box - All the same brand and model; 2 x AKG C414EB - Over Heads; 1 x Shure SM81 - Hi Hat; 1 x Shure SM58 - Kick Drum to Bass Pedalboard (Side Chain); 1 x Shure SM81 - Ride; 2 x Shure SM57 or Audix i5 Snare Top, Snare Bottom; 2 x Sennheiser MD421 - Guitar Lead; 4 x Shure Beta98AD/C - Toms; 1 x Audix D6 - Kick Drum; 1 x Shure Beta91 - Kick Drum; 1 x Shure Beta52 - Bass combo; 2 x Shotgun condenser mics - Ambience (L & R); 2 x HeadSets for Back Vocalists, black color, without body packs and receivers (HEADSETS ONLY!).

4 AUX/MATRIX SENDS AUX 1 LINE LEAD VOC 4 x FLOOR WEDGES; AUX 2 IN-EAR GUITAR (YOUR IN-EAR SYSTEM); AUX 3 IN-EAR KEY (YOUR IN-EAR SYSTEM); AUX 4 IN-EAR BASS (YOUR IN-EAR SYSTEM); AUX 5,6 STEREO IN-EAR DRUMS (YOUR IN-EAR SYSTEM); AUX 7,8 STEREO IN-EAR LEAD VOX XLR MALE CABLE (OUR IN-EAR SYSTEM); AUX 9 DRUM FILL (18 SUB + 15 TOP). MTX 1,2 MAIN L & R; MTX 3 FRON FILLS; MTX 4 SUBWOOFERS; STANDS For drum set, guitar and bass cabs 3 x GUITAR STANDS; 2 x KEYBOARD STANDS (X-type); 2 x AMBIENCE MIC STANDS; 4 x MIC STAND FOR OUR WIRELESS ANTENNAS; 3 x STRAIGHT MIC STANDS (ROUND BASE) K&M SOFT TOUCH (LIKE ON PICTURE BELOW!)

5 INPUT LIST FOH, MON FOH Channel name Mic / DI DCA/VCA 1 Bass Drum out Mic Audix D6 1 2 Bass Drum in Mic Beta Bass Drum Trigger Di 1 4 Snare top Mic Sm57/i5 1 5 Snare bottom Mic Sm57/i5 1 6 HI Hat Mic Sm Tom 10 Mic E Tom 12 Mic E Floor Tom 14 Mic E Floor Tom 16 Mic E Ride Mic Sm Over Head L Mic C Over Head R Mic C Drum SPDSX L Di 1 15 Drum SPDSX R Di 1 16 Bass DI 2 17 Bass MIC Shure Beta Guitar Lead L Mic MD Guitar Lead R Preamp #18 Preamp # Key L DI 4 21 Key R DI 4 22 Play Back L DI 5 23 Play Back R DI 5 24 Back L DI 5 25 Back R DI 5 26 Click DI 5 27 Voc Lead DI DI 7 28 Voc Lead Split 7 29 Voc Lead LOBODA Mic Radio (свой) 7 32 Ambience L Mic 33 Ambience R Mic 34 Back 1 Mic Radio 6 35 Back 2 Mic Radio 6 36 Voc Lead Loboda Spare Mic Radio 7

6 STAGE PLAN GUIT Key

7 LIGHT For the qualitative performance of the Artist, the following lighting equipment is necessary: Beam moving head ( W) (Clay Paky Sharpy или Mythos, Martin Rush MH3 beam) 32pcs. Led moving head with zoom (5-15W) - (Clay Paky B-EYE K10 или K20, JB lighting A8 или A12) 28pcs. Spot moving head with ZOOM and IRIS ( W) (Clay Paky QWO800 или HPE 1500) 14pcs. Strobe with light mode ( W) (Clay Paky Stormy CC, Martin Atomic 3000) 14pcs. Blinder 4x line (4x650W) (DTS, Eurolite) 16pcs. RGB(W) LedBar ( W) (Clay Paky Show-Batten 100) 8pcs. Followspot ( W) 2pcs. Hazer - DF50, Tour Hazer2 - Or any European or American brand, a supply of liquid for 8 hours of continuous operation 3шт. Do not use FOGmashine with liquid based on glycerin! Light Console - MAlighting GrandMA2 full size or light+fader wing. This list of equipment is the minimum necessary and is designed for a stage with dimensions of 14x10m., LED screen 6x4m. The address of the devices is determined by the light equipment distributor, the operation mode of the devices is 16bit, without shapers. The list of addresses, types and operating modes of devices must be provided at the beginning of the check. All lighting equipment must be installed, connected and tested at least three hours before the start of the check sound. Fixtures must have the same luminous flux. It is not permissible to use lamps that have worked their life. On the court during the preparation and the whole performance of the Artist, there must be a technician capable of promptly eliminating any malfunctioning of the lighting equipment. Operators of light guns are also needed. Radio communication with gun operators is mandatory (with a HandsFree headset). The heights of the contr-trusses and the screen are set proportionally to the height of the suspension of the farm of the first plan and the height of the "totems". The height of the hangers, the size of the trusses and the screen, the arrangement of the floor equipment can vary depending on the size of the particular scene. If you have any questions, contact the light designer at any time of the day regardless of the time zone! Workers of all technical services should be sober not only during the sound-check, but also during performance of the Artist!

8 Light Plot :

9 This picture needs to be printed and written on it fixture patching in the format - universe.address ( )

10 VIDEO: Each show requires LED Screen and local tech crew, who will play all video content. Screen size according to the stage length and height. It must fully fill back wall of the stage. Organizer assumes full responsibility for safety and reliability of suspension system of the LED screen and other suspended structures. In cases, when reliability of constructions is quested, by safety services or technical crew of the band, the artist reserves the right to cancel the show, without returning the fee. CONTENT/VIDEO CLIPS: The video is distributed from our media server. You need an HDMI cable near the light console. The server connects via Ethernet cable to MAlighting GrandMA2 either directly or via Ethernet Switch (in case the distributor uses ArtNet network), for SMPTE synchronization. In case the processor or video console is on the stage or behind the scenes, the HDMI line is laid using a conversion system via optics or Ethernet. SPECIAL EFFECTS AND ADDITIONAL EQUIPMENT: Two cannons with a silver metaphane for the last song of Pora Remix are required. It is allowed to use only CO2 guns - a big machine Big Blaster, the duration of operation is 30 sec. The amount of metaphane is calculated by 0.5kg per shot, the number of shots is 3 from each side. There must be techniques for launching and controlling guns, synchronization of the launch must be specified by the technicians themselves. Before the beginning of the concert, the launching moment and the number of shots separately negotiated with the administrator of the team. If the platform allows, you need to install 4 vertical flamethrowers, and 4 CO2 guns, evenly along the avant-stage. Before the beginning of the concert, the moments of the launch and the number of shots separately negotiated with the administrator of the team. It s necessary to provide 7 STAGE FANS (on the floor of the stage) located like on stage plan. Power supply: It is necessary to provide the electic power supply of all equipment which will be used during the performance. The power supply must be 3 phased with grounding, SOUND POWER INPUT MUST BE SEPARATE from which THE LIGHT is used! Note: All equipment must be installed, connected and checked before the band starts the tuning. All equipment and cables must be located in such a way for providing maximum of free space and not to affect the work of the staff and band on the stage. For the beginning of the sound-check, the system should be ready and adapted to sounding stage acoustic conditions of technical service of Your sound rental company. Technical workers and service staff should be on their work places during sound-check and whole performance. Please accord all the questions and issues with concert director and sound engineer of the band:

11 Hutsol Aleksandr Phone: (Viber/WhatsApp) Soundengineer Oleg Davidov Phone: +380 (66) Lighting engineer/designer

12 The main items in tech rider, requires a written response to the of band sound engineer. Fill form below: 1 Main PA system: TOP (line array): Amount - Subs: Amount - Fills: Amount - 2 itors system: Wedge: Amount - Drum fill TOP/SUB: Amount - In-ear system: 3 Mixing console: 4 Microphone list:.. 5 Guitar/bass amp s and cab s: GTR BASS GTR 6 Drum Kit: Stands Amount Mic stands for Loboda and Back vocalists: 8 Video LED screen: Size -. 9 Lighting List: Spot amount -. Wash amount -.. Beam amount -.. Par amount -. Strob amount -..