Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs

Transcription

1 Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs Marketing Name / Model [List multiple models if applicable.] HP EliteBook 8760w Mobile Workstation Name / Model #2 Name / Model #3 Name / Model #4 Name / Model #5 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). 1.0 Items Requiring Selective Treatment 1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable. Quantity of items Item Description Notes included in product Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) Batteries Mercury-containing components Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm With a surface greater than 10 sq cm 3 All types including standard alkaline and lithium coin or button style batteries For example, mercury in lamps, display backlights, scanner lamps, switches, batteries Includes background illuminated displays with gas discharge lamps Cathode Ray Tubes (CRT) 0 Capacitors / condensers (Containing PCB/PCT) 0 Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height External electrical cables and cords 0 Gas Discharge Lamps 0 Plastics containing Brominated Flame Retardants weighing > 25 grams (not including PCBs or PCAs already listed as a separate item above) Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent chambers, and service stations. Components and waste containing asbestos 0 EL-MF Page 1 Template Revision B PSG instructions for this template are available at EL-MF

2 Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Description #1 Description #2 Description #3 Description #4 Description #5 0 0 Tool Size (if applicable) Cross head of screwdriver TORX T8 (2.31mm) 3.0 Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: 1. Follow steps described in Disassembly instruction (file attached) 2. If parts can be removed without using a tool, remove it first. 3. Use correct screwdriver and torque value before unlock the screw Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations). EL-MF Page 2 Template Revision B PSG instructions for this template are available at EL-MF877-01

3 Document No. : SOP Aerosmith FA DIS ASS Y Station : 1(1/1) Name : Disassemble battery and cover 1. Pull safe lock to left end, take out battery (figure1) 2. Pull cover s safe lock to right end (figure 2), disassemble cover (figure3). Safe lock to right end until see red mark Disassemble cover Figure 3

4 Document No. : SOP Aerosmith FA DIS ASS Y Station : 2(1/1) Name : Loosen BTCB screw 1. Loosen BTCB screw * 8 (figure 1). Electric plum blossom screw driver (#1) 1

5 Document No. : SOP Aerosmith FA DIS ASS Y Station : 3(1/1) Name : Disassemble Bluetooth 1. Disassemble Bluetooth (figure1). 2. Disassemble Bluetooth Cable (figure 2).

6 Document No. : SOP Aerosmith FA DIS ASS Y Station : 4(1/1) Name : Disassemble ODD and loosen screw 1. Loosen BTCB Set screw * 4 (Figure1). 2. Disassemble ODD. Electric cross screw driver(#0) 1

7 Document No. : SOP Aerosmith FA DIS ASS Y Station : 5(1/1) Name : Loosen BTCB screw 1. Loosen BTCB screw* 6 (figure1). Electric plum blossom screw driver 1

8 Document No. : SOP Aerosmith FA DIS ASS Y Station : 6(1/1) Name : Disassemble Smart Card Holder 1. Disassemble FFC (figure 1), Loosen smart card holder screw * 2 (figure 2). 2. Pull up the smart card holder in parallel, then take out the round hole in the lower side (figure 3). 3. Loosen screw *1, separate smart card holder and smart card (figure 4) Pull up the smart card holder in parallel take out the round hole in the lower side Figure 3 Figure 4 Electric cross screw driver(#1) 1

9 Document No. : SOP Aerosmith FA DIS ASS Y Station : 7(1/1) Name : Disassemble HDD-1 1. Loosen HDD-1 screw * 3 (figure 1, figure 2) 2. Disassemble HDD-1 (figure2) HDD-1 HDD-1 HDD-2 Electric cross screw driver 1

10 Document No. : SOP Aerosmith FA DIS ASS Y Station : 8(1/1) Name : Disassemble HDD Put HDD-1 in support fixture, loosen screw * 4 Electric cross screw driver 1 Support fixture 1

11 Document No. : SOP Aerosmith FA DIS ASS Y Station : 9(1/1) Name : Disassemble HDD-2 1. Loosen HDD-2 screw * 3 (figure 1, figure 2) 2. Disassemble HDD-2 (figure2) HDD-1 HDD-2 Electric cross screw driver 1

12 Document No. : SOP Aerosmith FA DIS ASS Y Station : 10(1/1) Name : Disassemble HDD Put HDD-2 in support fixture, loosen screw * 4 Electric cross screw driver 1 Support fixture

13 Document No. : SOP Aerosmith FA DIS ASS Y Station : 11(1/1) Name : Disassemble DDR 1. Disassemble all DDR (, )

14 Document No. : SOP Aerosmith FA DIS ASS Y Station : 12(1/1) Name : Disassemble FFC and Keyboard 1. Disassemble K/B Stick-point FFC, do not pull touch Pad FFC while operation (figure 1) 2. For backlight K/B, Disassemble K/B light sensor FFC 3. Disassemble K/B FFC (figure 2)

15 Document No. : SOP Aerosmith FA DIS ASS Y Station : 13(1/1) Name : Disassemble FFC 1. Disassemble Touch pad FFC, finger/p FFC (figure 1) 2. Disassemble Power Button FFC (figure 2) 3. Disassemble SW/B FFC (figure 3) Touch pad FFC Figure 3

16 Document No. : SOP Aerosmith FA DIS ASS Y Station : 14(1/1) Name : Disassemble TPCB 1. Disassemble TPCB,as figure 1, figure

17 Document No. : SOP Aerosmith FA DIS ASS Y Station : 15(1/1) Name : Disassemble Finger/B 1. Disassemble TPCB, disassemble Finger Print/B, disassemble tape (figure 1).

18 Document No. : SOP Aerosmith FA DIS ASS Y Station : 16(1/1) Name : Disassemble CRT/B 1. Loosen screw*1, disassemble CRT/B (figure 1) figure 二 Electric cross screw driver 1

19 Document No. : SOP Aerosmith FA DIS ASS Y Station : 17(1/1) Name : Disassemble WLAN cable 1. Disassemble WLAN cable form WLAN (figure 1) 2. Loosen screw * 2, disassemble WLAN module (figure 2) Electric cross screw driver 1

20 Document No. : SOP Aerosmith FA DIS ASS Y Station : 18(1/1) Name : Disassemble WWAN cable 1. Disassemble WWAN cable form WWAN (figure 1) 2. Loosen screw *2, disassemble WWAN module (figure1) Electric cross screw driver 1

21 Document No. : SOP Aerosmith FA DIS ASS Y Station : 19(1/1) Name : Disassemble cable 1. Disassemble cable from left to right (, figure 2)

22 Document No. : SOP Aerosmith FA DIS ASS Y Station : 20(1/1) Name : Disassemble Antenna Camera CNTR 1. Disassemble Camera cable (figure 1, figure 2) 2. Disassemble Antenna from white hook (figure 3) 3. Disassemble Antenna tape, disassemble Cable. 4. Disassemble LCM Cable (figure 4) Figure 3 Figure 4

23 Document No. : SOP Aerosmith FA DIS ASS Y Station : 21(1/1) Name : Disassemble Hinge cover 1. Put machine in support fixture (figure1) 2. Loosen screw * 4 () 3. Disassemble hinge cover. 4. Loosen screw *4 (figure 3, figure4) Electric plum blossom screw driver (#1) 1 Support fixture 1 Figure 3 Figure 4

24 Document No. : SOP Aerosmith FA DIS ASS Y Station : 22(1/1) Name : Disassemble LCM 1. Loosen LCM screw * 2 (figure 1/figure 2) 2. Disassemble LCM. Electric plum blossom screw driver 1

25 Document No. : SOP Aerosmith FA DIS ASS Y Station : 23(1/1) Name : Disassemble DDR 1. Disassemble all DDR

26 Document No. : SOP Aerosmith FA DIS ASS Y Station : 24(1/1) Name : Disassemble USB 3.0/B Loosen USB 3.0/B &Audio/B screw * 6 (figure1/figure2) 2. Disassemble USB 3.0/B. 2 Electric cross screw driver 1

27 Document No. : SOP Aerosmith FA DIS ASS Y Station : 25(1/1) Name : Disassemble speaker and Audio/B Speak er 1. Loosen Speaker screw * 2 (figure 1). 2. Disassemble speaker and Audio/B. 3. Separate speaker and Audio/B (figure 2). Electric cross screw driver 1

28 Document No. : SOP Aerosmith FA DIS ASS Y Station : 26(1/1) Name : Disassemble Modem 1. Loosen screw * 2 (figure 1) 2. Disassemble Modem,separate Modem and RJ11Cable (figure 2) 3. Disassemble RJ11 Cable (figure 3, figure 4) Figure 3 Figure 4 Electric cross screw driver 1

29 Document No. : SOP Aerosmith FA DIS ASS Y Station : 27(1/1) Name : Disassemble RJ11 1. Disassemble cable (figure 1). 2. Loosen screw *1, disassemble RJ11 or Dummy cable (figure 2) Electric cross screw driver 1

30 Document No. : SOP Aerosmith FA DIS ASS Y Station : 28(1/1) Name : Disassemble VGA/B Thermal 1. Loosen VGA/B Thermal screw * 6 (figure 1) 2. Disassemble FAN Cable (figure 2) 3. Disassemble VGA Thermal Electric cross screw driver 1

31 Document No. : SOP Aerosmith FA DIS ASS Y Station : 29(1/1) Name : Disassemble Fan 1. Loosen screw(6052a ) * 3, Disassemble FAN; 2. Disassemble Fan (6033B ) and Thermal (figure1) Electric cross screw driver 1 Support fixture 1

32 Document No. : SOP Aerosmith FA DIS ASS Y Station : 30(1/1) Name : Disassemble VGA/B figure1 1. Loosen screw * 2 (figure 3) 2. Disassemble VGA/B (figure 1) figure2 Electric cross screw driver 1

33 Document No. : SOP Aerosmith FA DIS ASS Y Station : 31(1/1) Name : Disassemble CPU Thermal 1. Loosen thermal screw* 4 (figure 1) 2. disassemble Thermal (figure 2 or figure 3) 35W 45W/55W Figure 3 Electric cross screw driver 1

34 Document No. : SOP Aerosmith FA DIS ASS Y Station : 32(1/1) Name : Disassemble CPU 1. Loosen CPU SOCKET by using one-line screw Unlock driver (figure 1, figure 2) 2. Disassemble CPU by using suction pen. Lock One-line screw driver 1 Suction pen 1

35 Document No. : SOP Aerosmith FA DIS ASS Y Station : 33(1/1) Name : Disassemble NUT 1. Disassemble Nut * 2 (figure 1,figure 2) Hexagon screw driver 1

36 Document No. : SOP Aerosmith FA DIS ASS Y Station : 34(1/1) Name : Disassemble DC & RJ45 cable DC Cable Loosen screw * 3 (figure 1, figure 2) 2. Remove DC Cable, RJ45 Cable CNTR from M/B (figure 3) 3. Disassemble DC Cable, RJ45 cable (figure 1,2) 4. Reverse machine, Disassemble sub-battery (figure 4) 3 RJ 45 Cable Figure 3 Figure 4 Electric cross screw driver 1

37 Document No. : SOP Aerosmith FA DIS ASS Y Station : 35(1/1) Name : Disassemble MB 1. Loosen screw * 4 (figure1) 2. Disassemble bluetooth cable (figure2) 3. Disassemble Main board 1 3 Figure 3 4 Bluetooth CNTR Electric cross screw driver 1