Product End-of-Life Disassembly Instructions
|
|
|
- Edwin Brown
- 5 years ago
- Views:
Transcription
1 Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs Marketing Name / Model [List multiple models if applicable.] HP ProBook x360 G Education Edition Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE)..0 Items Requiring Selective Treatment. Items listed below are classified as requiring selective treatment..2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable. Quantity Item Description Notes of items included in product Printed Circuit Boards (PCB) or Printed Circuit With a surface greater than 0 sq cm Assemblies (PCA) Batteries All types including standard alkaline and lithium 2 coin or button style batteries Mercury-containing components For example, mercury in lamps, display backlights, scanner lamps, switches, batteries 0 Liquid Crystal Displays (LCD) with a surface greater than 00 sq cm Includes background illuminated displays with gas discharge lamps Cathode Ray Tubes (CRT) 0 Capacitors / condensers (Containing PCB/PCT) 0 Electrolytic Capacitors / Condensers measuring 0 greater than 2.5 cm in diameter or height External electrical cables and cords 0 Gas Discharge Lamps 0 Plastics containing Brominated Flame Retardants 0 weighing > 25 grams (not including PCBs or PCAs already listed as a separate item above) Components and parts containing toner and ink, Include the cartridges, print heads, tubes, vent 0 including liquids, semi-liquids (gel/paste) and toner chambers, and service stations. Components and waste containing asbestos 0 Components, parts and materials containing refractory ceramic fibers 0 EL-MF Page Template Revision B PSG instructions for this template are available at EL-MF877-0
2 Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Screwdriver # Screwdriver#2 Fixture #3 Fixture #4 0 Tool Size (if applicable) Electric torx screw driver(t8) Electric cross screw driver # Support Fixture solder Fixture Description #5 3.0 Product Disassembly Process 3. List the basic steps that should typically be followed to remove components and materials requiring selective treatment:. Follow steps described in Disassembly instruction (file attached) 2. If parts can be removed without using a tool, remove it first 3. Use correct screwdriver and torque value before unlock the screw Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations). EL-MF Page 2 Template Revision B PSG instructions for this template are available at EL-MF877-0
3 MANUFACTURING PROCESS INSTRUCTIONS MECHANICAL ASSEMBLY MODEL : Autobot
4 Document No. Autobot FA DIS ASS Y SOP Station : (/) Name : Loosen BTCB screw s. Loosen BTCB screw (6052B038680)*6. and Set screw *2 () Holding fixture list (holding fixture standard) Electric torx screw driver(t8) Electric torx screw driver(#) Qty Holding fixture list (holding fixture standard) Qty
5 Document No. Autobot FA DIS ASS Y SOP Station : 2(/) Name : Disassemble BTCB & TPCB. Disassemble BTCB & TPCB Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
6 Document No. Autobot FA DIS ASS Y SOP Station : 3(/) Name : Disassemble FFC.Use Support Fixture, Disassemble FFC() Support Fixture KB FFC Click pad FFC 2 nd CCD FFC Fig.2 Holding fixture list (holding fixture standard) Support Fixture Qty Holding fixture list (holding fixture standard) Qty
7 Document No. Autobot FA DIS ASS Y SOP Station : 4(/) Name : Disassemble CCD Bracket FOR non 2 nd CCD & 2 nd CCD model. Disassemble CCD Bracket(6053B39070),screw M2*2(6052B05630)*2. Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty Electric cross screw driver #
8 Document No. Autobot FA DIS ASS Y SOP Station : 5(/) Name : Disassemble 2nd CCD FOR 2 nd CCD. Disassemble CCD(6054B86340) screw M.6*2(6052B020440)*. Disassemble 2nd Webcam/B screw M2*2.3(6052B027640)* () 2. Disassemble 2nd Webcam FPC,CCD/B CNTR Disassemble Gasket(6054B00990)*(Fig.2) 靠左靠下貼附固定 Fig.2 Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty Electric cross screw driver #
9 Document No. Autobot FA DIS ASS Y SOP Station : 6(/) Name : Disassemble T/P Bracket. Disassemble TP Mylar(6054B86270) () 2. Disassemble TP Bracket(6053B39050) screw M2*2.3 (6052B027640) * 5 (Fig.2) Fig.2 Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty Electric cross screw driver #
10 Document No. Autobot FA DIS ASS Y SOP Station : 7(/) Name : Disassemble TP BRKT\TP Module. Disassemble screw M.6*2 (6052B020440) * 2 () 2.. Disassemble T/P FFC (6035B0620) 2 Disassemble Gasket (6054B0050) * 2, Disassemble TP Module TP BRKT(Fig.2) Fig.2 Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty Electric cross screw driver #
11 Document No. Autobot FA DIS ASS Y SOP Station : 8(/) Name : Disassemble KB BRKT. Disassemble Gasket (6054B0050) * 3, Disassemble Thermal Pad(6054B )* Acid tape(6054b78330) ( 图一 ) 2. Use solder Fixture Disassemble KB BRKT(Fig.2) Fig.2 Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty solder Fixture
12 Document No. Autobot FA DIS ASS Y SOP Station : 9(/) Name : Disassemble KB. Disassemble KB FFC Disassemble Keyboard Mylar (6054B86290) () Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
13 Document No. Autobot FA DIS ASS Y SOP Station : 0(/) Name : Disassemble Cable FFC Antenna. Disassemble all Cable CONN FFC Antenna () 2. Disassemble K-Lockscrew M2.5*5(6052A000350)*(Fig.2) Fig.2 Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty Electric cross screw driver #
14 Document No. Autobot FA DIS ASS Y SOP Station : (/) Name : Disassemble SSD & WLAN. Disassemble WLAN CARD screw M2*3(6052B0560)* () FOR SSD SKU 2. Disassemble SSD CARD screw M2*3(6052B0560)*(Fig.2) Fig.2 CCD Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty Electric cross screwdriver #
15 Document No. Autobot FA DIS ASS Y SOP Station : 2(/) Name : Disassemble BATT.Disassemble MB Tin foil () 2. Disassemble Battery screw M2*3(6052B0560)*6 () Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty Electric cross screwdriver #
16 Document No. Autobot FA DIS ASS Y SOP Station : 3(/) Name : Disassemble Speaker. Disassemble Speaker screw M2*4.5(6052B038690)*4() Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty Electric cross screwdriver #
17 Document No. Autobot FA DIS ASS Y SOP Station : 4(/) Name : Disassemble M/B/Audio board. Disassemble Audio/Bscrew M2.5*3(6052A003490)* () 2. Disassemble M/B screw M2.5*3(6052A003490)*5(Fig.2) 3. Disassemble RTC Battery(Fig.2) Fig.2 4 Fig.2 Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty Electric cross screwdriver #
18 Document No. Autobot FA DIS ASS Y SOP Station : 5(/) Name : Disassemble MB 3 2. Disassemble MB screw M2.5*3(6052A003490)*4 () 2. Disassemble (Fig.2) 4 Fig.2 Holding fixture list (holding fixture standard) Electric cross screwdriver # Qty Holding fixture list (holding fixture standard) Qty
19 Document No. Autobot FA DIS ASS Y SOP Station : 6(/) Name : Disassemble Thermal Module. Disassemble Thermal Module 6043B02240(Auras) 6043B0224(CCI) screw M2*2.3(6052B027640) *4 () Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty Electric cross screwdriver #
20 Document No. Autobot FA DIS ASS Y SOP Station : 7(/) Name : Disassemble Hinge screw. Disassemble Hinge screw M2.5*2.5(6052B032960)*6 M2.5*3(6052A003490)*2 (/Fig.2) Fig.2 Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty Electric cross screwdriver #
21 Document No. Autobot FA DIS ASS Y SOP Station : 8(/2) Name : Disassemble B-Cover & A-Cover FOR None-touch Disassemble B-Cover & A-Cover Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
22 Document No. Autobot FA DIS ASS Y SOP Station : 8(2/2) Name : Disassemble B-Cover & A-Cover FOR touch.disassemble B-Cover & A-Cover Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
23 Document No. Autobot FA DIS ASS Y SOP Station : 9(/) Name : DisassembleLCM. Disassemble LCM screw screw M2*2.3(6052B027640) * 4 () Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty Electric cross screw driver #
24 Document No. Autobot FA DIS ASS Y SOP Station : 20(/) Name : Disassemble LCD G-sensor/B. Disassemble EDP Cable (607B079300) () 2. Disassemble G-sensor/B(30A288080) (Fig.2) G-sensor/B Fig.2 Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
25 Document No. Autobot FA DIS ASS Y SOP Station : 2(/) Name : Disassemble Hingescrew. Disassemble Hinge screw M2*2.3(6052B027640)*4() 2. Disassemble Hinge BRKT Tin foil () Holding fixture list (holding fixture standard) Electric cross screw driver # Qty Holding fixture list (holding fixture standard) Qty
26 Document No. Autobot FA DIS ASS Y SOP Station : 22(/) Name : Disassemble Hingescrew. Disassemble Hinge screw M2.5*2.5(6052B032960)*6 (,2) 轉動到 90 度 Fig.2 Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty Electric cross screw driver #
27 Document No. Autobot FA DIS ASS Y SOP Station : 23(/) Name : Disassemble Hinge Rubber. Disassemble Hinge Rubber Fig.2 Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty Electric cross screw driver(#0)
28 Document No. Autobot FA DIS ASS Y SOP Station : 24(/) Name : Disassemble Antenna Cable AUX Main. Disassemble Main AUX Antenna() Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
29 Document No. Autobot FA DIS ASS Y SOP Station : 25(/) Name : Disassemble Camera cable/camera. Disassemble Camera cable Camera, Camera/B () Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs
Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs Marketing Name / Model [List multiple models if applicable.] HP EliteBook 8760w Mobile Workstation Name / Model #2
Product End-of-Life Disassembly Instructions
Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs Marketing Name / Model [List multiple models if applicable.] HP EliteBook 830 G5 Notebook PC Purpose: The document
Product End-of-Life Disassembly Instructions
Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs Marketing Name / Model [List multiple models if applicable.] HP 425 Notebook PC Name / Model #2 Name / Model #3 Name
Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs
Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs Marketing Name / Model [List multiple models if applicable.] HP ProBook 6460b Notebook PC Name / Model #2 Name /
Product End-of-Life Disassembly Instructions Product Category: Printers
Product End-of-Life Disassembly Instructions Product Category: Printers Marketing Name / Model [List multiple models if applicable.] HP Officejet Pro X45dn/ CN459A HP Officejet Pro X45dw/CN463A HP Officejet
Product End-of-Life Disassembly Instructions
Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs Marketing Name / Model [List multiple models if applicable.] HP ProBook 4430s Notebook PC Name / Model #4 Name /
Lenovo IdeaPad U310 NoteBook
Lenovo IdeaPad U310 NoteBook 2012-09-12 Lenovo IdeaPad U310-Overview Lenovo IdeaPad U310-Overview Top View Left Side View Comments: Bottom View Both the top case and bottom case are aluminum alloy material
XT-4015 Disassembly Assembly Guide
XT-4015 Disassembly Assembly Guide Main Unit Disassembly Remove the two screws that in the back of main unit from base as shown. Remove the two screws by turning the main unit to the other side while removing
How to change the firmware EPROM in ALPHA signs
How to change the firmware in ALPHA signs Introduction ALPHA signs, with and without the Smart Alec option, have an internal that is used to control the sign. From time to time, the firmware in this is
Amazon Kindle Fire - Disassemble Guide
Amazon Kindle Fire - Disassemble Guide TTT-9007 Small Phillips Screwdriver TTT-9010 Plastic Opening Tools TTT-9013 Spudger Heat Gun / Blow Dryer This guide will show you how to disassemble the Amazon Kindle
FIELD REPLACEABLE UNIT DOCUMENTATION
GENERAL INFORMATION Tools Required for Proper Disassembly and Reassembly: 1. Phillips Screwdriver (Size0&1) 2. 4mm Flat head Screwdriver 3. Case Separator 4. ESD Wrist Strap 5. ESD mats 6. Tweezers Before
Iphone 5 Glass/Lcd REPAIR GUIDE. Version Edition
Iphone 5 Glass/Lcd REPAIR GUIDE Version 1 2016 Edition IPhone 5 Glass/LCd REPAIR GUIDE RiAna Soto Repair Training Specialist rsoto@cellairis.com FOR EVERY REPAIR MAKE SURE TO COMPLETE, INITIAL, AND HAVE
DIODE / TRANSISTOR TESTER KIT
DIODE / TRANSISTOR TESTER KIT MODEL DT-100K Assembly and Instruction Manual Elenco Electronics, Inc. Copyright 1988 Elenco Electronics, Inc. Revised 2002 REV-K 753110 DT-100 PARTS LIST If you are a student,
Nokia 6 Cellphone. PennEngineering. April 7th, 2017 Xiaoming Chen. 1
Nokia 6 Cellphone April 7th, 2017 Xiaoming Chen PennEngineering 1 Overview Nokia 6 has a 5.5-inch FHD IPS display with a polarizer film covered with 2.5D Gorilla Glass for protection. The smartphone comes
Repairing iphone 4 LCD Backlight Dim spot issue
Repairing iphone 4 LCD Backlight Dim spot issue found a way to fix a liquid damaged iphone screen back light issue Written By: Pranav Singh ifixit CC BY-NC-SA www.ifixit.com Page 1 of 26 INTRODUCTION found
Written By: justin chadwick
Nintendo DS Lite Buttons Replacement How to remove and replace the Nintendo DS Lite Buttons. Written By: justin chadwick ifixit CC BY-NC-SA www.ifixit.com Page 1 of 10 INTRODUCTION This guide has been
Written By: Arthur Shi
iphone 8 Taptic Engine Replacement Replace the Taptic Engine in an iphone 8. Written By: Arthur Shi ifixit CC BY-NC-SA www.ifixit.com Page 1 of 18 INTRODUCTION The Taptic Engine produces your iphone's
Apple Wireless Keyboard (A1255) Teardown. Written By: mayer. ifixit CC BY-NC-SA Page 1 of 11
Apple Wireless Keyboard (A1255) Teardown Written By: mayer ifixit CC BY-NC-SA www.ifixit.com Page 1 of 11 INTRODUCTION I bought this keyboard off ebay broken just to tear it down for posterity. I found
Digital Multimeter, Pen Type
MODEL: D03127 Digital Multimeter, Pen Type 1 CONTENTS Page Number Description 3 Important Safety Information 3 Electrical Symbols 4 Overview 4 Measurement Operation 5 AC & DC Voltage Measurement 5 AC &
Disassembling Laptop Toshiba Satellite P855 P850 plus Hinge FIX,
Disassembling Laptop Toshiba Satellite P855 P850 plus Hinge FIX, I have described how to open and fully disassemble an laptop Toshiba Satellite P885 (more exact, P855-339). The info is for any Toshiba
iphone 4S Dismantling Instructions
iphone 4S Dismantling Instructions These instructions will show you how to open the iphone to replace the digitizer, LCD screen and other internal parts. Opening your iphone will void your warrantee, and
Written By: Walter Galan
iphone 4 Logic Board Replacement Replace a dead logic board in your iphone 4. Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 16 INTRODUCTION Use this guide to replace your iphone
Written By: Walter Galan
iphone 4S Logic Board Replacement Replace a dead logic board in your iphone 4S. Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 22 INTRODUCTION Use this guide to replace your iphone's
Google Pixel DISASSEMBLE. PennEngineering
Google Pixel DISASSEMBLE June 4th, 2018 Allen Wang PennEngineering www.pemnet.com 1 Google Pixel Teardown www.pemnet.com 2 Details & Findings Pictures and Description of the Google Pixel and our disassembly
MI HDTV Interactive Set - Top Box. PennEngineering. 21 st April, 2015 by Chen Xiaoming & Zhang Larry. 1
MI HDTV Interactive Set - Top Box 21 st April, 2015 by Chen Xiaoming & Zhang Larry PennEngineering www.pemnet.com 1 MI HDTV Interactive Set - Top Box www.pemnet.com 2 MI HDTV Interactive Set - Top Box
Please post the following 13 images to my post.
Dear Patrick Logan, Hi, I found that the internet helped me a lot more than expected. So I decided to share a lot of information to help other people solving their issues. Please post the following 13
2004-(Z Series) HDILA Lamp Replacement Procedure Quick Step Guide
2004-(Z Series) HDILA Lamp Replacement Procedure Quick Step Guide How To Determine If The Lamp Requires Replacement? After 30 seconds of turning on the TV The POWER LED and LAMP LED rapidly blink together
1 Rolscreen Cartridge Removal:
Rolscreen Retractable Screen Cartridge Dis-Assembly and Assembly Service Instruction These instructions apply to: Rolscreen Retractable Screen 2/2017-Current Tools Required: Flat blade screwdriver Drill/driver
9 Exploded Views and Parts List
9-1 Exploded View G G G Figure9-1 Total Disassembly SAM4S ER-390 SERIES 9-1 A-1 A-2 Figure9-2 ASS Y COVER-PRINTER A. ASS Y COVER-PRINTER No. Parts No. Description / Specification Q`ty Design-Location Serviceable
Written By: Andrew Optimus Goldberg
Replace the screen your GSM/AT&T iphone 4. Written By: Andrew Optimus Goldberg ifixit CC BY-NC-SA www.ifixit.com Page 1 of 25 INTRODUCTION [video: http://www.youtube.com/watch?v=obpfpfx5abw] Use this guide
XI. Rotary Attachment Setups
XI. Rotary Attachment Setups 1) Turn off the laser. 2) Put the rotary attachment onto the engraving table. Ensure the two screw holes on right side of rotary attachment match the two corresponding holes
Written By: Scott Havard
Prerequisite for removing barometric vent in an iphone 7 Plus Written By: Scott Havard ifixit CC BY-NC-SA www.ifixit.com Page 1 of 15 INTRODUCTION Prerequisite guide for removing the barometric vent in
Written By: Walter Galan
iphone 4 Vibrate Ring Switch Replacement Replace the metal portion of the vibrate/ring switch on your iphone 4. Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 21 INTRODUCTION Use
BX2173 Installation Instructions Ford Focus (including the 2.3L engine) 2003 Ford Focus SVT
BX2173 Installation Instructions 2000-04 Ford Focus (including the 2.3L engine) 2003 Ford Focus SVT Serial No. The front fascia, coolant line bracket and anti-pollution devices are removed for baseplate
Installation instructions
Installation instructions T70RX-03AIB, T70RX-03AWB, T70TX-02TTB, T70TX-03STB, T70TX-06TTB LANGUAGE: English (original) IM-T70-RX001-A01-EN CONTENTS Chapter 1: CUSTOMER INFORMATION 3 Chapter 2: PRODUCT
Assembly 30 cm x 30 cm Gem detectors Amilkar Quintero Florida Institute of Technology July 2009
Assembly 30 cm x 30 cm Gem detectors Amilkar Quintero Florida Institute of Technology July 2009 Test foils Approval criteria, 500 V with a leakage current less than 5nA each sector. Never touch the active
HP M506/MFP M527 CF-287A/X
HP M506/MFP M527 CF-287A/X TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS HP CF-287A/X TONER CARTRIDGE REMANUFACTURING THE HP LASERJET ENTERPRISE M506/MFP M527 CF-287A/X TONER CARTRIDGE By Mike Josiah and
LED Field Strength Indicator Kit
LED Field Strength Indicator Kit Description The Field Strength Indicator kit from Qrpkits.com provides a visual way to monitor RF fields through the brightness of an LED. It will respond to RF fields
Apple iphone 8. PennEngineering
Apple iphone 8 March 2018 by Jon Brunk PennEngineering www.pemnet.com 1 Apple iphone 8 www.pemnet.com 2 Details & Findings Pictures and Description of the iphone 8 and our disassembly process. www.pemnet.com
IPhone 7 Plus Digitizer/LCD REPAIR GUIDE. Version Edition
IPhone 7 Plus Digitizer/LCD REPAIR GUIDE Version 1 2016 Edition IPhone 7 Plus Digitizer/LCD REPAIR GUIDE LCD AND DIGITIZER REPLACEMENT RiAna Soto Repair Training Specialist rsoto@cellairis.com FOR EVERY
COLOR LASERJET PRO MFP. Repair Manual
OK COLOR LASERJET PRO MFP Repair Manual X M76 M77 HP Color LaserJet Pro MFP M76, M77 Repair Manual Copyright and License 03 Copyright Hewlett-Packard Development Company, L.P. Reproduction, adaptation,
Written By: Jeff Suovanen
iphone 8 Plus Taptic Engine Replacement Replace the Taptic Engine (haptic vibration motor) in an iphone 8 Plus. Written By: Jeff Suovanen ifixit CC BY-NC-SA www.ifixit.com Page 1 of 20 INTRODUCTION The
Written By: Walter Galan
Replace the small antenna attached to the headphone jack of your iphone 4S. Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 23 INTRODUCTION Use this guide to replace your iphone's
Circuit Board Assembly Instructions
Circuit Board Assembly Instructions This document walk you through the assembly of the Base4 Clock v1.2 - v1.3 circuit boards. Important note for kit buyers The color and appearance of the components may
A3 Size Flatbed Accessory for Kodak or Alaris Scanners
A3 Size Flatbed Accessory for Kodak or Alaris Scanners User s Guide A-61793 5K7032 Safety User precautions Only use the scanner and power supply indoors in a dry location. Make sure the electrical power
TITAN2-EDGE Public Access Computer Station Dual Track
TITAN2-EDGE Public Access Computer Station Dual Track TITAN2-EDGE Rev A 6/17 Model TITAN2-EDGE ASSEMBLY AND ADJUSTMENT TITAN2-EDGE PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the
TIE-ROD AND PIPE JOINTS
CHAPTER 5 Machines use various parts which are joined in several ways for the machine to function as whole. We have learnt about some devices like fasteners (temporary & permanent) and some simple joints
Samsung Galaxy S7. PennEngineering. April 2016 by Larry Zhang & Xiaoming Chen. 25th. 1
25th April 2016 by Larry Zhang & Xiaoming Chen PennEngineering 1 Overview 2 Details & Findings Pictures and Description of the Samsung Galaxy S7 and the Disassembly Process. 3 Teardown Step1: Remove the
Electronic Components
Electronic Components Arduino Uno Arduino Uno is a microcontroller (a simple computer), it has no way to interact. Building circuits and interface is necessary. Battery Snap Battery Snap is used to connect
Installing the FSP-211 Sensor in Light Fixture
(grey) WATTSTOPPER VOLTAGE HIGH/LOW/OFF PIR FIXTURE INTEGRATED OUTDOOR PHOTO/MOTION SENSOR Product Overview The is a passive infrared (PIR) outdoor sensor that raises or lowers the electric lighting level
DESCRIPTION & OPERATION: PIR OCCUPANCY SENSOR MSWSFSP221B-D FEATURES:
PROJECT NAME: CATALOG NUMBER: NOTES: FIXTURE SCHEDULE: Page: 1 of 5 PIR OCCUPANCY SENSOR DESCRIPTION & OPERATION: These fixture mounted sensors provide multi-level control based on motion and/or daylight
HP Photosmart D110a LCD Screen Replacement
HP Photosmart D110a LCD Screen Replacement Written By: Naveen Krishan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 11 INTRODUCTION Considering the steps in this guide were completed by 2 people, it is recommended
40"- 61" Electric Height Adjustable Desk Frame
40"- 61" Electric Height Adjustable Desk Frame Instruction Manual SKU: DESK-V102EW Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
HOLDERS EASY. Holders EASY for LUGA Shop Modules FOR LUGA SHOP MODULES HOLDERS EASY FOR LUGA SHOP MODULES
HOLDERS EASY FOR LUGA SHOP MODULES HOLDERS EASY FOR LUGA SHOP MODULES For simple and secure fixation with multiple optical With separate holders a simple and secure fixation of LED modules is possible.
RigExpert AA-170 Antenna Analyzer (0.1 to 170 MHz) User s manual
RigExpert AA-170 Antenna Analyzer (0.1 to 170 MHz) User s manual Table of contents 1. Description... 3 2. Specifications... 4 3. Precautions... 5 4. Operation... 6 4.1. Preparation for use... 6 4.2. Turning
User Manual Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer.
User Manual Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer.. This manual may contain several technical incorrect places or printing
AC/DC POWER SUPPLY KIT
AC/DC POWER SUPPLY KIT MODEL K-11 Assembly and Instruction Manual ELENCO Copyright 2016, 1989 by ELENCO All rights reserved. Revised 2016 REV-O 753211 No part of this book shall be reproduced by any means;
Read This Page First
Read This Page First If you are reading this you know the manuals are always available at QRPKITS.com. This is version 8.0 of the manual dated 4/27/2016. There is no need to print out the whole assembly
SPECIFICATION. G21 GSM Hercules Gen.II Penta Band Cellular Antenna
SPECIFICATION G21 GSM Hercules Gen.II Penta Band Cellular Antenna Part No. : G21.B.301111 Product Name : G21 GSM Hercules Gen.II Penta Band Cellular Antenna Screw-mount (Permanent mount) GSM/GPRS/CDMA/EVDO/UMTS/HSPA/WCDMA
Version: 1.0 Revised: 6/8/2011. CBU Assembly Instructions Manual
CBU Assembly Instructions Manual Contents 1 General... 3 2 Package... 4 2.1 Packing order... 4 2.2 Unpacking... 5 3 Assembly of the body... 6 3.1 General... 6 3.2 Mounting base drilling chart... 8 3.3
PARTS CATALOGUE / TECHNICAL GUIDE
PARTS CATALOGUE / TECHNICAL GUIDE (For Movement Replacement) [SPECIFICATIONS] Item Movement Cal. No. 9T82A Movement size Outside diameter Casing diameter Height ø33.0 mm ø30.0 mm 6.8 mm (x 1.0) Time indication
Interactive Monitor Arm
Interactive Monitor Arm Tools Required -5mm Allen wrench -Phillips screwdriver -Plastic mallet There are two ways to attach a Monitor Arm to a Full Frame; with a Beam, or with a Post Mount. Both methods
3 Shielded Compact Ribbon (SCR) Wiremount Plug, XX, and Shell Kit, F200-XXX
3 Shielded Compact Ribbon (SCR) Wiremount Plug, 36110-3000XX, and Shell Kit, 36310-F200-XXX Instructions June 2007 78-9100-4282-5 General This instruction manual explains the method of assembling the 3M
UVS-2800 Spectro UV-VIS Split Beam (PC) is a precise scanning
Spectro UV-VIS Split Beam (PC) is a precise scanning Spectrophotometer with a new design of 8 microprocessor automatic 2 row cell holder that moves noiseless with a special membrane. This Split Beam Spectro
Assembly and Installation Instructions for White Oak Audio Design TM-1001 LED board
Thank you for purchasing White Oak Audio Design s TM-1001 Upgrade LED Light Board. White Oak Audio Design products are meticulously engineered and tested to ensure a direct drop in fit with your tuner.
GENUINE ACCESSORIES INSTALLATION INSTRUCTIONS. ITEM QTY DESCRIPTION Usage Chart
PART NUMBER: 0000 8C R0 GENUINE ACCESSORIES INSTALLATION INSTRUCTIONS Rev. AAA *550-0554-000* APPLICABLE MODELS: 203 > CX-5 REQUIRED COMPONENTS: ITEM QTY DESCRIPTION Usage Chart MIRROR ASSEMBLY: Mirror
HT-1A Dual Band CW QRP Transceiver. Kit Building Instructions
HT-A Dual Band CW QRP Transceiver Kit Building Instructions Rev B, July 8, 08 Designed by BD4RG Exclusively distributed by CRKITS.COM and its worldwide distributors Join the group http://groups.io/g/crkits
PIPELINE DEFECT MAPPER
PIPELINE DEFECT MAPPER Receiver Colour Display C.A.T. Survey Graph ACVG Survey Graph GIS View General: The Pipeline Defect Mapper Kit designed and developed in such a way; to precisely locate and assist
Flavus 2.4 GHz Snap-In Antenna
Product Specification 1 Features Designed for 2.4 GHz applications [Bluetooth, WiFi (82.11b/g), Zigbee, WiMedia etc.] Intended for Snap-In mounting Supplied in trays 2 Description The Flavus antenna is
SERVICE MANUAL PARTS LIST MODEL: NH40
SERVICE MANUAL & PARTS LIST MODEL: NH40 CONTENTS What to do when... 1-3 SERVICE ACCESS Face Cover... 4 Bed Cover... 5 Free-arm Cover... 6 Front Cover... 7 Rear Cover... 8 MECHANICAL ADJUSTMENT Presser
Written By: Jeff Suovanen
iphone X Lower Speaker Replacement Remove or replace the primary loudspeaker on the bottom edge of the iphone X. Written By: Jeff Suovanen ifixit CC BY-NC-SA www.ifixit.com Page 1 of 22 INTRODUCTION The
Removing Nintendo DS Lite Logic Board Screws
Removing Nintendo DS Lite Logic Board Screws Removing the Logic Board Screws, in preparation for other work. Written By: bushing ifixit CC BY-NC-SA www.ifixit.com Page 1 of 9 INTRODUCTION This guide has
OPERATOR'S MANUAL JUNE 2017
OPERATOR'S MANUAL JUNE 2017 TABLE OF CONTENTS PAGE 1.0 INTRODUCTION 2 2.0 WARNINGS 2 DUTY CYCLE 2 STORAGE 2 3.0 PHYSICAL DESCRIPTION 3 HIGH VOLTAGE PULSER/TUBEHEAD 3 BASE 3 BATTERY PACK 3 BATTERY CHARGER
Written By: Jeff Suovanen
iphone 8 Plus Antenna Flex Cable Remove or replace the small antenna interconnect cable in the iphone 8 Plus. Written By: Jeff Suovanen ifixit CC BY-NC-SA www.ifixit.com Page 1 of 18 INTRODUCTION Use this
Cover Page. Factory Radio Other Documents Available For This Vehicle:
Factory Radio Other Documents Available For This Vehicle: No documents available at this time Adobe Acrobat Reader Printing Tips: 1) Select FLE then PRNT and select your printer. 2) n the print options
1.0 INTRODUCTION WARNINGS 2 DUTY CYCLE 2 STORAGE PHYSICAL DESCRIPTION 3 HIGH VOLTAGE PULSER/TUBEHEAD 3 BASE 3 BATTERY PACK 3
JUNE 2017 TABLE OF CONTENTS PAGE 1.0 INTRODUCTION 2 2.0 WARNINGS 2 DUTY CYCLE 2 STORAGE 2 3.0 PHYSICAL DESCRIPTION 3 HIGH VOLTAGE PULSER/TUBEHEAD 3 BASE 3 BATTERY PACK 3 BATTERY CHARGER 3 CONTROL MODULE
MacBook Pro 15" Unibody 2.53 GHz Mid 2009 Front Display Glass Replacement
MacBook Pro 15" Unibody 2.53 GHz Mid 2009 Front Display Glass Replacement Replacing the front display glass. Written By: Andrew Bookholt ifixit CC BY-NC-SA www.ifixit.com Page 1 of 25 INTRODUCTION Use
QUANTUM Qflash T2 / X2 OPERATING INSTRUCTIONS
QUANTUM Qflash T2 / X2 OPERATING INSTRUCTIONS 1.0 DESIGNATIONS T2 AND X2 1. Removable Reflector, two positions Normal and Wide angle. 2. Flash-tube 2A. Modeling Lamp (for Model X2 only) 3. Bounce Head,
Scanning Electron Microscope FEI INSPECT F50. Step by step operation manual
Scanning Electron Microscope FEI INSPECT F50 Step by step operation manual Scanning Electron Microscope, FEI Inspect F50 FE-SEM-F Observation Flow Saving Data And Analysis Specimen preparation Error check
4 INSTALLATION Requirements on Installation Securing Space Before installing the Panaboard, be sure to secure space shown in section 2.6.
4 INSTALLATION The Panaboard is used by hanging it on the wall or installing it on the stand (sold separately as an option). When using the Panaboard by hanging it on the wall, refer to the description
Tuesday 24 May 2016 Morning
Oxford Cambridge and RSA Tuesday 24 May 2016 Morning GCSE DESIGN AND TECHNOLOGY: ELECTRONICS AND CONTROL SYSTEMS A515/01 Sustainability and technical aspects of designing and making Electronics *5942119015*
ProHead. User s Guide
ProHead User s Guide 2Profoto ProHead Profoto ProHead Thank you for choosing Profoto. Thanks for showing us your confidence by investing in a ProHead unit. For more than four decades we have sought the
6 Exploded View and Part List
Figure6-1 Total Disassembly (ER-650/ER-650R) SAM4S ER-650 SERIES 6-1 Figure6-2 ASS Y COVER-PRINTER A. ASS Y COVER-PRINTER No. Parts No. Description / Specification Q`ty Design-Location Serviceable Remark
RZR 4 Doors Part # Polaris RZR XP & Turbo ( ) Black
Racing 3191 N Washington St. Suite 2 Chandler, AZ 85225 1 (800) 708-9803 http://www.racing.com RZR 4 Doors Part # 07-1802 Polaris RZR XP 4 1000 & Turbo (2015-2018) Black Revision No: 01 Revision Date:
Tools Required: Materials Identification and Segregation: Disassembly Steps: Aeron Disassembly for Recycling
Y Aeron Disassembly for Recycling Tools Required: Power Driver 2 lbs Hammer Torx Bit Safety Glasses Rubber Mallet Materials Identification and Segregation: Where possible, plastic components are marked
MF SERIES: SINGLE ALUMINIUM CAN CONSTRUCTION ME SERIES: DOUBLE ALUMINIUM CAN CONSTRUCTION AC MOTOR START CAPACITORS
CAPACITORS MF SERIES: SINGLE ALUMINIUM CAN CONSTRUCTION ME SERIES: DOUBLE ALUMINIUM CAN CONSTRUCTION Aluminium Electrolytic Motor Start Capacitors Consisting of high purity Etched and Formed foil interlaced
FILE NINTENDO DS LITE REPLACEMENT SHELL
18 June, 2018 FILE NINTENDO DS LITE REPLACEMENT SHELL Document Filetype: PDF 495.22 KB 0 FILE NINTENDO DS LITE REPLACEMENT SHELL Nintendo DS Lite Housing Shell Replacement- I need instructions! New Replacement
Thermo Scientific SPECTRONIC 200
molecular spectroscopy Thermo Scientific SPECTRONIC 200 Part of Thermo Fisher Scientific The New Standard for Routine Measurements Robust, Multifunction Sample Compartment Whether you measure in 10 mm
Bill of Materials: Droplet Photo timing machine PART NO
Droplet Photo timing machine PART NO. 2171612 This is a timer that synchronizes the camera, flash and solenoid valve so that anyone with a SLR camera with tripod and an external flash will be able to take
Motorola E815 / E816 Disassembly / Assembly Guide. Ver. 1.1 By Chubbs_WA
Motorola E815 / E816 Disassembly / Assembly Guide Ver. 1.1 By Chubbs_WA April 10, 2007 Table of Contents Disassembly Tools needed 3 Disassembly for dummies 4 Just a note 5 Disassembly of keypad housing
TOYOTA TACOMA LED BED LIGHTS Preparation
Preparation Part Number: PT948-35160 Kit Contents Item # Quantity Reqd. Description 1 1 Hardware Kit 2 1 Driver Side LED assembly 3 1 Passenger Side LED assembly 4 1 Main Wire Harness Hardware Bag Contents
Ribcage Installation. Part 2 - Assembly. Back-Bone V1.06
Ribcage Installation Part 2 - Assembly Back-Bone V1.06 Contents Section 1 Before You Get Started... 2 Included With Your Kit:... 2 Figure: A... 3 CAUTION!... 4 Note:... 4 Tools Required... 5 Section 2:
Le Max2. PennEngineering. September 26 th 2016 by Larry Zhang. 1
September 26 th 2016 by Larry Zhang PennEngineering 1 Overview 5.7-inch Super AMOLED display with 2560 1440 resolution (Quad HD /2K) 2.21-megapixel rear camera with dual pixel autofocus, 4K video capture;
The worlds we live in. The worlds we live in
The contents of this Supporting Material document have been prepared from the Eight units of study texts for the course M150: Date, Computing and Information, produced by The Open University, UK. Copyright
V110 Parts Replacement Instructions
V110 Parts Replacement Instructions This document is intended for service personnel. It provides information not found in the user manual. For information such as replacing the battery pack, hard disk
User guide ProHead Plus
User guide ProHead Plus For other languages visit: /support ProHead Plus 2 Congratulations on your new Profoto product! Thanks for showing us your confidence by investing in a ProHead unit. For more than
Written By: Jeff Suovanen
iphone 8 Battery Replacement Replace the battery in your iphone 8 if it has failed, swollen, or no longer holds sufficient charge. Written By: Jeff Suovanen ifixit CC BY-NC-SA www.ifixit.com Page 1 of
SPECIFICATION. G21.W White Hercules Gen II Penta Band Cellular Antenna
SPECIFICATION G21.W White Hercules Gen II Penta Band Cellular Antenna Part No. : G21.B.W.301111 Product Name : G21.W Hercules Gen.II Penta Band Cellular Antenna Screw-mount (Permanent mount)- White Version
Repairing Brother Inkjet Printer "Cartridge Detect Impossible" Sensor for cartridge detection
Repairing Brother Inkjet Printer "Cartridge Detect Impossible" Sensor for cartridge detection Brother comes with the message "detect impossible" or "no cartridge" although one has just used a new cartridge
Solid Pine Shoe Rack And Mirror
Solid Pine Shoe Rack And Mirror Assembly Instructions - Please keep for future reference 346/0348 imensions Width - 50cm epth - 37cm Height - 161cm Important - Please read these instructions fully before