r 100 External Mastic Wrap (Recommended, by others) Mastic (by others REINFORCEMENT PLAN VIEW 1067 ID DONUT LID-914 OPENING
|
|
|
- Carmella Hines
- 6 years ago
- Views:
Transcription
1
2
3 t 4208DL-36CO 178 L Lifting Cable Lifting Detail Lifting Lug 6 PLN VIEW 1 r SECTION - Gasket (by others)--, External Mastic Wrap (Recommended, by others) 64 Mastic (by others REINFORCEMENT PLN VIEW SCLE 1: 30 TONGUE & GROOVE DETIL SUGGESTED JOINT DETIL Specification and General Notes: 1. Manhole design/manufacture to STM C478M Specification. 2. Concrete testing to current version of STM C497/CS 23.1&2. 3. Min. concrete compressive strength 30 MPa with Max. W/C ratio of Gasket to STM C-443 specification (by others). 5. Concrete cover to be Min.25mm. 6. ll dimensions to be millimeter. 7. Welded wire mesh overlap to be 300mm. 8. Manhole design and construction to MMCD manhole specification section Manufacturing tolerance to be+/- 5mm. 10. Concrete Exposesure Class to be Min. Stripping Strength to be 15MPa 12. ll Form Finish to be Standard Grade 13. ll Unformed Finish to be Steel Trowelled Finish or Wood Float Finish 14. Lifting cable and accessaries to meet the strength requirement in lifting detail 15. Hoisting and Rigging system to meet WORK SFE BC OHS Regulation Guideline Part 14/15 DI MOND :, RECST CONCRETE Description: 1067 ID DONUT LID-914 OPENING Project: 42 Donut Lid 786#-36" OPENING 7520 Conrad Street Burnaby, B.C. V5 2H7 Phone : Fax : Drawn : Date : D.L 24/09/2016 proved : v.w. Load Rating: H20 RTED catalog No. 4208DL -36CO Dwg. No. Rev. No. Scale : s Shown This drawing is the proper.ty of the Sheet No. iamond Precast Concrete. ll inform ation contained herein is confidential and may 1 OF 1 no rt ut : g;e ;,
4
5 t 4208DL Lifting Cable Lifting Detail Lifting Lu PLN VIEW SECTION - Gasket (by others)--, External Mastic Wrap (Recommended, by others) 64 Mastic (by others REINFORCEMENT PLN VIEW SCLE 1: 30 TONGUE & GROOVE DETIL SUGGESTED JOINT DETIL Specification and General Notes: REV.B 1. Manhole desi n manufacture to STM C478M S ification.. ncrete testing to current version o.. 3. Min. concrete compressive strength 30 MPa with Max. W/C ratio of Gasket to STM C-443 specification (by others). 5. Concrete cover to be Min.25mm. 6. ll dimensions to be millimeter. 7. Welded wire mesh overlap to be 300mm. 8. Manhole design and construction to MMCD manhole specification section Manufacturing tolerance to be+/- 5mm. 10. Conaete Exposesure Class to be Min. Stripping Strength to be 15MPa 12. ll Form Finish to be Standard Grade 13. ll Unformed Finish to be Steel Trowelled Finish or Wood Float Finish 14. Lifting cable and accessaries to meet the strength requirement in lifting detail 15. Hoisting and Rigging system to meet WORK SFE BC OHS Regulation Guideline Part 14/15 DI MOND :, RECST CONCRETE Desaiption: 1067 ID DONUT LID Project: 42 Donut Lid 786# 7520 Conrad Street Burnaby, B.C. V5 2H7 Phone : Fax : Drawn : Date : D.L 07/03/2016 proved : Load Rating: catalog No. 4208DL v.w. H20 RTED Dwg. No. Rev. No. Scale : C s Shown This drawing is the proper.ty of the Sheet No. iamond Precast Concrete. ll inform ation contained herein is confidential and may 1 OF 1 no rt ut : g;e ;,
6 ;( / "" / "' I 9 2 / I I I OD t 4208DLH Lifting cable \ \ Lifting Lug Lifting Detail 5 PLN I VIEW X 608 OPENING SECTION - Gasket (by others)--, External Mastic (Recommended, 64 Mastic (by others TONGUE & GROOVE DETIL SUGGESTED JOINT DETIL BOTTOM REINFORCEMENT PLN VIEW SCLE 1: 30 Specification and General Notes: REV.B 1. Manhole desi n manufacture to STM C478M S ification.. ncrete testing to current version o.. 3. Min. concrete compressive strength 30 MPa with Max. W/C ratio of Gasket to STM C-443 specification (by others). 5. Concrete cover to be Min.25mm. 6. ll dimensions to be millimeter. 7. Welded wire mesh overlap to be 300mm. 8. Manhole design and construction to MMCD manhole specification section Manufacturing tolerance to be+/- 5mm. 10. Conaete Exposesure Class to be Min. Stripping Strength to be 15MPa 12. ll Form Finish to be Standard Grade 13. ll Unformed Finish to be Steel Trowelled Finish or Wood Float Finish 14. Lifting cable and accessaries to meet the strength requirement in lifting detail 15. Hoisting and Rigging system to meet WORK SFE BC OHS Regulation Guideline Part 14/15 DI MOND :, RECST CONCRETE Description: 1067 ID Donut Lid Hatch Opening Project: 42 Donut Lid Hatch Opening 600 # 7520 Conrad Street Burnaby, B.C. V5 2H7 Phone : Fax : Drawn: Date: catalog No. D.L 31/03/2016 proved: Load Rating: 4208DLH v.w. H20 RTED Dwg. No. Rev. No. Scale: C s Shown This drawing is the proper.ty of the Sheet No. iamond Precast Concrete. ll information contained herein is confidential and may 1 OF 1 no : g;ert;, ut 42-09
STANDARD CATCH BASIN GUTTER LINE CB INLET FRAME & GRATE, GROUTED TO GRADE RINGS AS REQ'D CONCRETE CURB FINISHED GRADE ASPHALT MAX 50 MIN
CB INLET FRAME & GRATE, GROUTED TO GRADE RINGS AS REQ'D ASPHALT 20 GUTTER LINE CONCRETE CURB FINISHED GRADE PRECAST GRADE RINGS, 2 50 100 MAX PRECAST CB LID GROUT ALL AROUND CB LEAD, INSIDE & OUTSIDE OF
Peters Creek Bridge. A Beginner's Guide to Structural Engineering COVER SHEET. General Notes: uimby. Sheet Index:
General Notes:. ll member and connection design is to be in accordance with latest version the merican Institute Steel Construction (ISC) Specification for Structural Steel Buildings and the ISC Specification
SECTION MANHOLES
SECTION 02601 MANHOLES PART 1 GENERAL 1.01 SCOPE OF WORK A. WORK required under this section consists of all materials, accessories, equipment, tools, and labor required to install precast concrete standard
Pipe Product Catalog Table of Contents
Pipe Product Catalog Table of Contents Section A: Drawing #: Page Description A1 Reinforced Concrete Pipe A3 Storm Manhole Sizing Chart (48" - 96") A3.1 Storm Manhole Sizing Chart (108" - 144") A4 48"
CONSTRUCTION SPECIFICATION FOR MAINTENANCE HOLE, CATCH BASIN, DITCH INLET, AND VALVE CHAMBER INSTALLATION
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 407 NOVEMBER 2013 CONSTRUCTION SPECIFICATION FOR MAINTENANCE HOLE, CATCH BASIN, DITCH INLET, AND VALVE CHAMBER INSTALLATION TABLE OF CONTENTS 407.01
MANHOLES PART I: GENERAL. A. Precast Concrete Manholes
MANHOLES PART I: GENERAL A. Precast Concrete Manholes 1) Manholes shall be made of precast concrete sections of which the top section shall be eccentric or flat slab top. The bottom section shall be a
Substation 33/11kV. General Notes. Drawn by: Hewa Qader Mustafa. Soran Rostam Aziz. C-For footings = 75 mm. B-For beams & columns = 40 mm.
General Notes Unless otherwise noted, All the dimensions are given in meter. Do not scale from these drawings. These drawings are proposed drawings. All structural drawings should be read in conjunction
UNDERGROUND UTILITY TRENCHES AND VAULTS Page 1 of 6 ADDENDUM #1
Page 1 of 6 ADDENDUM #1 PART 1 GENERAL 1.01 PRINCIPAL WORK IN THIS SECTION A. The requirements of the Owner's General Conditions, Supplementary Conditions, Special Conditions, and Division 1 - General
Utility Structures. Utility vaults, trenches, transformer pads Electrical Pole Bases and switching cubicles
Utility Structures Utility vaults, trenches, transformer pads Electrical Pole Bases and switching cubicles PRODUCT GUIDE & TECHNICAL REFERENCE MANUAL Providing the right solutions. UTILITY STRUCTURES Perfect
MH Table of Contents Standard Title/Scope Page Table of Contents SCE Public
MH Table of Contents Standard Title/Scope MH 300 MH 310 MH 318 MH 320 MH 325 MH 330 MH 335 MH 340 MH 350 Manholes Requirements MH 300.1 Manholes Requirements...........................................
Manholes Table of Contents
Standard MH 300 Title Manholes Requirements MH 300.1 Manholes Requirements Manholes Table of Contents Underground Structures Standards MH 310 MH 318 MH 320 MH 325 MH 330 MH 335 MH 340 MH 350 Precast Tub-Type
SECTION 58 PRECAST CONCRETE BOX CULVERT. This work consists of furnishing and installing Pre-cast Concrete Box Culverts.
SECTION 58 PRECAST CONCRETE BOX CULVERT 58.1 DESCRIPTION A. General This work consists of furnishing and installing Pre-cast Concrete Box Culverts. B. Related Work Section 51 Section 52 Section 53 Section
The Manitoba Water Services Board SECTION Standard Construction Specifications September 2013 Page 1 of 8
September 2013 Page 1 of 8 Part 1 General 1.1 DESCRIPTION OF WORK.1 The work described herein shall consist of the construction of air release chambers, flushout chambers, valve chambers, meter chambers
INSTALLATION INSTRUCTIONS. March 2016 FOR FURTHER QUESTIONS, PLEASE CALL
March 2016 INSTALLATION INSTRUCTIONS FOR FURTHER QUESTIONS, PLEASE CALL 775 440 2025 JENSEN WATER RESOURCES 521 Dunn Circle, Sparks, NV 89431 JensenPumps.com Figure 1: This illustration shows a complete
SECTION PRECAST CONCRETE SECTIONAL MANHOLES
SECTION 02545 PRECAST CONCRETE SECTIONAL MANHOLES PART 1 - GENERAL 1.01 SUMMARY A. Section Includes: 1. Precast reinforced concrete cylindrical sectional manholes, complete with openings, inserts, hardware,
Introduction of British Standard BS 8666:2005
ARES Information Sheet BS 8666:2005 Introduction of British Standard BS 8666:2005 ourtesy of Valbruna UK Ltd Scheduling, Dimensioning, Bending and utting of Steel Reinforcement for oncrete Important changes
PD 3 Dowel Cradle. Load Transfer System Industrial Slab on Ground
PD 3 Dowel Cradle Industrial Slab on Ground Provides the flattest joints Assists in reducing long term maintenance costs Extends the life-cycle of the floor and the asset Engineered to meet Super Flat
Diamond Dowel. Load Transfer System INDUSTRIAL SLAB ON GROUND
Diamond Dowel INDUSTRIAL SLAB ON GROUND Diamond Dowel designed for construction joints Tapered plate design allows for diagonal shrinkage Eliminates the need to drill or process formwork Design ensures
SPECIFICATIONS FOR THE MANUFACTURE AND DESIGN OF PRECAST THREE SIDED ARCH STRUCTURES, WINGWALLS AND HEADWALLS
SPECIFICATIONS FOR THE MANUFACTURE AND DESIGN OF PRECAST THREE SIDED ARCH STRUCTURES, WINGWALLS AND HEADWALLS 1. DESCRIPTION THESE SPECIFICATIONS ARE FOR A PRECAST THREE SIDED ARCH STRUCTURE, HEADWALLS
Description: SM-BGA socket for BGA223 19x15 array 0.5mm pitch 8mm x 10mm x 1.2mm DUT
Silver Ball Matrix BG Socket Recommended Torque 1.5 in-lb. Features Wide temperature range (-55C to +150C). Current capability is 4 per pin. Over 40GHz bandwidth @-1dB for edge pins. Low and stable contact
KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, 1990 EDITION
Sheet 1 of 5 KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, 1990 EDITION NOTE: This special provision is generally written in the imperative mood. The subject, "the
StormTrap Guide Specification. StormTrap SingleTrap on Pad Foundation Groundwater BELOW Invert Revised 11/21/18
StormTrap Guide Specification StormTrap SingleTrap on Pad Foundation Groundwater BELOW Invert Revised 11/21/18 This product guide specification is written according to the Construction Specifications Institute
Overview Special Lugs for Special Problems Angled, Shaped and Trimmed the Way You Need Them
Special Lugs for Special Problems Angled, Shaped and Trimmed the Way You Need Them Thomas & Betts can solve your difficult wire bending and terminating problems in confined power distribution panels, switchgear
City of Regina Standard Construction Specifications SECTION LIST OF SEWER STANDARD DRAWINGS
City of Regina Standard Construction Specifications SECTION 14999 LIST OF SEWER STANDARD DRAWINGS S-1 No Drawing Feb/10 S-2 Precast Manhole 1050mm Dia. July/10 S-2B Precast Manhole 1200mm Dia. Jan/17 S-3
I-W07/W77. Couplings DETAIL A WARNING. Photo Showing Pipe with Weld Seam Ground 6 inches/152 mm Back from Pipe End and an AGS Groove
WARNING Read and understand all instructions before attempting to install any Victaulic piping products. These products must be used only on pipe that is prepared to Victaulic Advanced Groove System (AGS)
STORM M ANHOLE FOR 42" PIPE AND SM ALLER JOB NO. SHEET NO. DATE MARCH 2015 OF MIN OF 3 CRSES MAX OF 5 CRSES 30"MAX 3 OR 3.5 PRECAST ECCENTIC CONC
01-APR-2015 13:33 = I:\MSV8i\Plotting\piblack.ptb V:\201001\\C\8x11_Howell_Det\stm_det01_8x11_st01.dgn TIME = MIN 3 CRSES MAX 5 CRSES 3 OR 3.5 PRECAST ECCENTIC CONC ID PIPE GRADE A CONC FILL 4" 8" 2-0"SUMP
F-5-1a. Concrete Bollards (Detail 1 of 2) WEIGHT: 166kg. WEIGHT: 227kg. WEIGHT: 113kg. WEIGHT: 212kg
Contents F-5-1a Concrete Bollards F-5-1b Concrete Bollards F-5-2 Concrete Bollards with City Logo F-5-3 Cast Iron Bollards F-5-4 Decorative Steel Bollard F-5-5 Swivel P Gate Steel Bollard F-5-6 Steel Bollard
CONCRETE MANHOLES.
CONCRETE CONCRETE SHAW PIPE produces circular, precast, concrete manholes in diameters 1050mmØ through 3000mmØ. Precast, concrete manholes are most frequently used for pipeline and sewer entry and are
GENERAL ISOMETRIC LAYOUT
EXISTING OR PROPOSED WIPER WALL SUPPORT STRUCTURE GATE LID CARBATHAN HG 0 WEB GRAY LOWER PAN GRATING ALUMINUM WIPER WALL CARBATHANE HG, 90 GRAY STRUCTURAL SPECIFICATIONS:. FLOODGATE MATERIAL TO BE ALUMINUM
Reinforcing Mesh Product Guide
Reinforcing Mesh Product Guide Reinforcing New Zealand since 1954 Super Ductile 500E & Hard Drawn NORTH ISLAND Fletcher Reinforcing supplies the reinforcing steel and mesh that provides the strength to
To: New York State Department of Transportation ENGINEERING INSTRUCTION. Approved:
To: New York State Department of Transportation ENGINEERING INSTRUCTION Title: PRECAST CONCRETE PAVEMENT SLAB SYSTEMS STANDARD SPECIFICATION Distribution: Manufacturers (18) Local Govt. (31) Agencies (32)
Segmental ring types provided by F P McCann: Segments in stock are front bolted. Back bolted segments are available to order: Cross joint Corbel Ring
Building Manual for F P McCann `Smoothbore Shaft Linings with EPDM Gaskets (rev 04) (To be read in conjunction with the Segmental Shaft and Tunnel Safety Data Sheet) Segmental ring types provided by F
Series 1600 WeatherGuard Dock Enclosure
Fairborn USA Inc. 205 Broadview Street Upper Sandusky, OH 43351 1-800-262-1188 Fax 1-419-294-4980 Series 1600 WeatherGuard Dock Enclosure All Models! WARNING Do not install this product unless you read
Reinforcing Mesh Product Guide
Reinforcing Mesh Product Guide Reinforcing New Zealand since 1954 Super Ductile 500E & Hard Drawn SOUTH ISLAND Fletcher Reinforcing supplies the reinforcing steel and mesh that provides the strength to
Overview The Thomas & Betts Method is Better. Just Four Easy Steps to a Perfect Connection! Step 1. Step 2
Overview The Thomas & Betts Method is Better. The Thomas & Betts method of installing compression connectors on power cables is designed to provide a high degree of reliability in electrical wiring. This
Flanged Dowel Box. Load Transfer System INDUSTRIAL SLAB ON GROUND
Flanged Dowel Box INDUSTRIAL SLAB ON GROUND Designed for construction joints in Post Tension or large shrinkage specifications Large lateral movement and expansion capacity Eliminates the need to drill
SECTION G ESTIMATE OF QUANTITIES
PROJECT STATE OF SOUTH DAKOTA NH 2115(45)87 SHEET G2 TOTAL SHEETS G27 SECTION G ESTIMATE OF QUANTITIES BID ITEM NUMBER ITEM QUANTITY UNIT 009E0010 Mobilization Lump Sum LS 560E0068 7'x3' Precast Concrete
ENGINEERED BUILDING PRODUCTS. Boomerang CONNECTOR
ENGINEERED BUILDING PRODUCTS Boomerang CONNECTOR B o o m e r a n g C o n n e c t o r FOR FIXING JACK/CUT-OFF TRUSSES TO HIP/BOOMERANG TRUSSES APPLICATION: The Boomerang Connector has been developed to
FACTS YOU NEED TO KNOW ABOUT WATERTIGHT PRECAST MANHOLES
KISTNER CONCRETE PRODUCTS, INC. 8713 READ ROAD EAST PEMBROKE, NEW YORK 14056-0218 PH: 585-762-8216 FX: 585-762-8315 FACTS YOU NEED TO KNOW ABOUT WATERTIGHT PRECAST MANHOLES ASTM C-478 ASTM C-443 KISTNER
Acrowall-CP Cement-Plaster Stucco
Acrowall-CP Cement-Plaster Stucco SYSTEM DESCRIPTION 1033764 Typical Details 1. ACROWALL-CP SYSTEM APPLICATION 2. ACROWALL-CP SYSTEM APPLICATION WITH EPS BOARD 3. ACROWALL-CP SYSTEM ISOMETRIC VIEW 4. SURFACE
B. Installation Instructions. Provide installation instructions, including any special equipment, to address the following.
SAMPLING AND TESTING. The Sampling and Testing requirements contained in -03 shall apply. MARKING. The Marking requirements contained in -03 shall apply. FINAL PRODUCTION INSPECTION. The Final Production
THE ONTARIO CONCRETE PIPE ASSOCIATION
THE ONTARIO CONCRETE PIPE ASSOCIATION PRECAST BOX & CULVERT GUIDELINE Table of Contents 1 INTRODUCTION... 6 1.1 Background... 6 1.2 Existing Handbook and Drawings... 6 1.3 Distribution... 6 1.4 Revisions...
SYARIKAT BEKALAN AIR SELANGOR SDN BHD
NOTE : 1. FOR LEGEND, ABBREVIATION AND GENERAL NOTES SEE DRG. NO. SYA / STD / 001. 2. ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE STATED. 3. ACTUAL LENGTH OF PE COMMUNICATION PIPES SHALL BE DETERMINED ON
SECTION PRECAST CONCRETE STRUCTURES
SECTION 02605 PRECAST CONCRETE STRUCTURES PART 1 GENERAL 1.01 DESCRIPTION A. CONTRACTOR shall provide all professional services, labor, materials, equipment and incidentals as shown, specified and required
INVITATION FOR BID (IFB) IFB NO. GSWA
INVITATION FOR BID (IFB) IFB NO. GSWA-005-16 AGAT AND MALOJLOJ RESIDENTIAL TRANSFER STATION IMPROVEME AND DEDEDO RESIDENTIAL TRANSFER STATION CLOSURE ADDENDUM NO. 6 September 22, 2016 ALL BIDDERS MUST
Convex Strainers DN PN 80, 100, 200
55 Convex Strainers DN 400-1000 PN 80, 100, 200 Designed for protection of compressor rotor bundle against foreign-object damage. Working medium is non-aggressive natural gas and other non-aggressive media
ORDER CODES 1-2(A) 1-3 R5T185L Single Platinum RTD Elements 1-2 Available Sheath Diameters 316SS 1-4 Length CODE TEMPERATURE
RTD ssemblies with Extension Leadwire RTD ssemblies with Sheath Terminations The RTD elements illustrated and described on this page are designed to measure temperature in a variety of process and laboratory
Erstantie 2, FIN Villähde Tel , Fax
www.anstar.eu 2 www.anstar.eu 3 CONTENTS Page 1 PRODUCT DESCRIPTION...4 2 MATERIALS AND STRUCTURE...4 2.1 PRODUCT RANGE...4 2.2 MATERIALS...4 2.3 MANUFACTURING...4 2.4 MANUFACTURING TOLERANCES...4 2.5
6o ft (18.3 m) Southwest Windpower, Inc West Route 66 Flagstaff, Arizona USA Phone: Fax:
6o ft (18.3 m) sectional MONOPOLE TOWER INSTALLATION MANUAL Southwest Windpower, Inc. 1801 West Route 66 Flagstaff, Arizona 86001 USA Phone: 928.779.9463 Fax: 928.779.1485 www.skystreamenergy.com 3-CMLT-1390-01
SECTION PUBLIC UTILITY MANHOLES AND STRUCTURES. 2. Modular precast concrete pump wetwell. 5. Manhole bedding and cover materials.
SECTION 02082 PUBLIC UTILITY MANHOLES AND STRUCTURES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Modular precast concrete manholes with tongue-and-groove joints, transition to cover frame, covers,
E-Z-Ground Grounding Connectors
2 2 2 4 9 6 7 6 0 9 4 8 4 Thomas & Betts offers its complete line of grid-ground compression connectors. Our E-Z-Ground connectors are designed for direct burial and offer a safe, efficient alternative
NEW HOME WARRANTY A REFERENCE GUIDE FOR TYPICAL WALL AND WINDOW DETAILS (RAINSCREEN SYSTEM) SHOWN AS FIBRE CEMENT CLADDING
NEW HOME WARRANTY A REFERENCE GUIDE FOR TYPICAL WALL AND WINDOW DETAILS (RAINSCREEN SYSTEM) SHOWN AS Reference Guide 0.1 GENERAL 0.1 Reference Guide 0.2 Index 0.3 Disclaimer & Limitations 0.4 General Notes
Kerkau Manufacturing. B16.5 Flange Book
Kerkau Manufacturing B16.5 Flange Book TABLE OF CONTENTS Revision 1 Title Page Table of Contents Tolerance Page Permissible Imperfections Dimensions of Flange Facings (all pressure rating classes) Dimensions
VSOF-BS403A. Splice Closure for Fiber Optic Cable User Manual Rev.3
Splice Closure for Fiber Optic Cable 1. Introduction 1.1 General VISSEM S BS403A protects fiber optic splicing point in various installation conditions such as aerial, manholes, ducts, wall and direct
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27370-5 SOUTH AFRICAN NATIONAL STANDARD Precast concrete manhole sections and components Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
StormTrap Guide Specification. StormTrap 2 SingleTrap on Aggregate Foundation Groundwater BELOW Invert Revised 11/30/17
StormTrap Guide Specification StormTrap 2 SingleTrap on Aggregate Foundation Groundwater BELOW Invert Revised 11/30/17 This product guide specification is written according to the Construction Specifications
Standard Specifications
Standard Specifications PART 1.00 GENERAL 1.01 DECRIPTION SECTION 02620 PRECAST REINFORCED CONCRETE SANITARY MANHOLES A. Work included: The Contractor shall furnish all labor, materials, equipment, and
. b I - , x 0 r A Expansion Joint (See Curt, Standards for d&a&). Curb -.,,-Expansion 1 Joht flow Direction Ii ir tll / 1: (4111 flow Direct +i-.&++i+q+-&fz$z Transition Face of Curb inlet. Vertical Face
Extract 8.7 When dimensioning an acute angle the tangential lines shown in Figure 4 shall be used. (C) Figure 4 - Dimensioning of an acute angle
S 8666:2005 Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete The information contained in the S 8666:2005 Shapes Guide has been reproduced from SI material, and has been
2016 Specification Treads, Base, Stringers and other Amenities Wausau Tile Precast Epoxy Terrazzo
2016 Specification Treads, Base, Stringers and other Amenities 09400 Wausau Tile Precast Epoxy Terrazzo PART 1 - GENERAL 1.1 SUMMARY A. Perform all work required to complete, as indicated by the Contract
Look Our New Technology
1. PRECAST WALL CONNECTORS Tunel Pey Khazar PSK Wall Nail are precast wall connectors designed for tension splicing. The structural connection between precast wall and other concrete element is achieved
Flange Dimensions Class 125 Bronze Flange Dimensions Class 300 Bronze Flange Dimensions Class 150 Bronze Flange Dimensions
Dimensions Class Bronze Dimensions Meets Ib. A.S.M.E. Stard Class 00 Bronze Dimensions Meets ANSI STD B. Nominal Dim. A O.D. Dim. B Circle Dim. C Hole No. Holes Nominal Dim. A Diam. Dim. B Min. Dim. C
PERFORM WITH PRECISION MAGNETIC PRODUCTS FOR PRECASTING CONCRETE CONSTRUCTION SOLUTIONS BROCHURE
MAGNETIC PRODUCTS FOR PRECASTING PERFORM WITH PRECISION CONCRETE CONSTRUCTION SOLUTIONS BROCHURE Form Magnets ON/OFF MAGNETS Strong adhesion and shear capacity -650# to 2500# adhesion Easy to turn on or
Plate 60 ArmourMate. Joint Edge Protection INDUSTRIAL SLAB ON GROUND. Plate 60 AmourMate. Joint Edge Protection
Plate 60 AmourMate Plate 60 ArmourMate INDUSTRIAL SLAB ON GROUND Accommodates large concrete shrinkage Facilities thermal movement Prevents spalling on construction joints Extends the life-cycle of the
Stainless Steel Flexible Water Connectors. Dependable. Durable. Professional.
Stainless Steel Flexible Water Connectors Dependable. Durable. Professional. BrassCraft Stainless Steel Flexible Water Connector The Professional Standard Designed with superior craftsmanship, the BrassCraft
shawprecastsolutions.com BEBO Arch Systems PRODUCT GUIDE & TECHNICAL REFERENCE MANUAL Providing the right solutions.
shawprecastsolutions.com BEBO Arch Systems PRODUCT GUIDE & TECHNICAL REFERENCE MANUAL Providing the right solutions. BEBO ARCH SYSTEMS BEBO ARCH units are high quality, low maintenance precast structures
Sectional HDD Reamer Package
Sectional HDD Reamer Package Recommended for Sand, Soft Soil, Sand Stone, Coral Mix and Gravel Carbides Internally welded leaving an external groove. Using a thin grinder blade, worn out carbides can be
The Saddle Rack. For Power And Communication Cables
The Saddle Rack For Power And Communication Cables Underground Devices SADDLE RACKS: Low Cost, But Tough and Non-Corrosive For Temporary Support or Permanent Installation For Use in Manholes, Handholes,
SAUDI COMMITTEE FOR PALESTINIAN RELEIF
SAUDI COMMITTEE FOR PALESTINIAN RELEIF ITB 2014-042 PAL 10-49740 /Construction of 300 Residential Units in Rafah Package #12: Electrical and Telecommunication Works Part C. SECTION 9: PRICE SCHEDULE (Bill
INSTALLATION SHOP DRAWINGS FOR MINNEAPOLIS, MN
MINNEAPOLIS, MN 2-0- 2-- General Notes Abbreviations Deviations from Architectural Specifications Deviations from Architectural Drawings ALUM. = ALUMINUM B.O. = BY OTHERS CONT. = CONTINUOUS. = CLEARANCE
ABOUT INLAND. Tannis Karklin, E.I.T Technical Sales and Marketing
ABOUT INLAND Inland roots in the Winnipeg area date back to the early 960 s. Over time, through a number of mergers and acquisitions Inland Pipe is now part of the Lehigh Hanson group in North America
UPDATE LOG FOR STANDARD DRAWINGS Item(s) Changed 6/1/18 STANDARD DRAWINGS
Date 6/1/18 STANDARD DRAWINGS UPDATE LOG FOR STANDARD DRAWINGS Item(s) Changed WATER STANDARD DRAWINGS Title Drawing Number Current Date Fire Hydrant and Appurtenance Locations, Improved Streets with Curb
The Redi-Flange Method. How It Works. Services. Engineering & Costing Assistance
... g n ldi ng... e i W No hread ing! T oov o N Gr o N The Redi-Flange Method Redi-Flange is a method of joining valves, fi ttings and equipment with integral fl anged ends to plain-ended pipe, with all
Midwest Roadside Safety Facility
19'-11 1/2" 6083 239'-11 1/2" 73139 Impact 1100C 25 43 5/16" 1100 upstream from the upstream face of the first shear fender downstream of the joint between barrier nos. 7 and 8 Upstream End Downstream
Call Today Ship Today!
JUST LIKE HAVING IT ON THE SHELF MOLDS WELD METAL ACCESSORIES M-100 M-101 M-102 M-10 M-106 M-112 M-12 M-151 M-15 M-156 M-159 M-161 SAME DAY SERVICE ( Market) 15CP 25CP 25CI 32CI 5CI Mini- Clamp Flint Ignitors
DISTRIBUTION VAULT 8' x 14' x 9'-4" DEEP TRAFFIC FLAT WALL WITH 5' x 8' OPENING
CU16003K REV 8' x 14' x 9'4" DEEP TRAFFIC FLAT WALL 0113 SHEET 1 OF 6 CU 16003K CU16003K REV 8' x 14' x 9'4" DEEP TRAFFIC FLAT WALL 0113 SHEET OF 6 CU 16003K ITEM (PER ENDWALL): A. 6" DIAMETER PVC CONDUIT
Ph.D. Preliminary Qualifying Examination. Cover Page. Thermodynamic. January 17, 2013 (Thursday) 9:30 am 12:30 noon Room 2145 Engineering Building
GENERAL INSTRUCTIONS: COLLEGE OF ENGINEERING MECHANICAL ENGINEERING Ph.D. Preliminary Qualifying Examination Cover Page Thermodynamic January 17, 2013 (Thursday) 9:30 am 12:30 noon Room 2145 Engineering
Double Bar Plate Dowels for Saw-Cut Contraction Joints
Double Bar Plate Dowels for Saw-Cut Contraction Joints Designed to Deliver More Serviceable Slabs Concrete slabs-on-ground must be able to withstand the repetitious, concentrated loads and abrasion of
Hobart Stainless Steel Solid Wire Drums Setup Guide
Hobart Stainless Steel Solid Wire Drums Setup Guide Quick installation, smooth feedability and easy arc starts 1 Stainless Steel Solid Wire Drum Features The upper portion of the drum is encompassed with
SECTION III STANDARD DRAWINGS ROYSE CITY GENERAL CONSTRUCTION NOTES & DETAILS
9. STANDARD DETAILS SECTION III STANDARD DRAWINGS ROYSE CITY GENERAL CONSTRUCTION NOTES & DETAILS j:\clerical\royse city\1-4086 general services\168-tech const standards review\tcss manual\2018 tcss manual\sec-9a
DETAIL SPECIFICATION SHEET FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT
INCH-POUND MIL-DTL-52525/34B 1 December 2008 SUPERSEDING MIL-DTL-52525/34A 30 June 1998 DETAIL SPECIFICATION SHEET FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT This specification is approved
ARMTEC.COM. Built to last. Custom Precast Solutions For Your Home. Custom Steps Custom Decks Window Wells Stairwells Brackets
ARMTEC.COM Built to last. Custom Precast Solutions For Your Home Custom Steps Custom Decks Window Wells Stairwells Brackets PRESTIGE UNIVERSAL CUSTOM STEPS AND DECKS Universal design Custom features PRESTIGE
SIG-032-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY III LUMINAIRE ARM (SEE CONTRACT) 6'-0", 8'-0", 10'-0" NOMINAL SPREAD
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
D1.8 Precast Concrete Channel & Duct System
Precast Concrete Channel & Duct System D1.8 Precast Concrete Channel & Duct System DRAINAGE April 2014 Hynds Precast Concrete Channel units have been designed for use in a multitude of applications from
BalConIEs.
BalConIEs Installation guidelines for balustrade cladding The following regulations and provisions must be observed when preparing and installing balustrade cladding using Trespa Meteon sheets: 防 The applicable
REPAIR CLAMP PARTS H fax: MULTIPLIER
REPAIR CLAMP PARTS Part Number Component Description Model Number Product Size List Price Unit V001 Neoprene Sheet Gasket AS All Sizes Square Inch V002 Waffle Pattern Gasket (NBR) AS All Sizes Square Inch
19" EIA SRD Swing Rack Installation Instructions
19" EIA SRD Swing Rack Installation Instructions (UL60950-1/UL2416 SRD Series Equipment Rack) 1-866-TRY-GLCC (879-4522) PREFACE This manual is provided to prevent service personnel from committing an act
GabionSupply.com a division of BlueStone Supply LLC
GabionSupply.com a division of BlueStone Supply LLC ph. 1.866.391.6295 email: info@gabionsupply.com ASSEMBLY & FILLING GUIDE FOR WELDED WIRE MESH GABIONS Before starting assembly... put on your safety
Assembly & Installation Guide. High Performance. Utility Poles
Assembly & Installation Guide High Performance Utility Poles RS Technologies Inc. www.rspoles.com Email Info@RSpoles.com Toll Free +1 877 219 8002 Phone +1 519 682 5202 Fax +1 519 682 3786 RS Technologies
2/15/2015. Current will always try to return to its source. In order for there to be current, there must be a complete circuit
Current will always try to return to its source In order for there to be current, there must be a complete circuit Current will take as many paths or circuits available to it to return to the source The
kv AC substation
132-400 kv AC substation Outdoor AC substations Earthing systems ETS-50-08-01, Rev. 0 technical standard Document no. 13/90592-127 ETS-50-08-01 v. 0 REVISION VIEW Document no.: 13/90592-127 Version Author
FOR SERVICE BOXES IN CONCRETE DRIVEWAYS, SEE NOTE Min. COVER UNDER DITCHES. 600 Min. COVER
WOOD SERVICE MARKER STAKE (50 x 00) PAINTED BLUE PL mm FROM PROPERTY LINE STANDARD CONCRETE SERVICE BOX WITH EXTENSION AS REQ'D 00 FINISHED GROUND/ROAD SURFACE FOR SERVICE BOXES IN CONCRETE DRIVEWAYS,
Service Release PLANBAR
Service Release PLANBAR 2016-1-2 You can only use this version if you have installed DVD number 03-02-02-16-FTW (PLANBAR 2016-1-1 Release) or DVD number 02-02-11-15-FTW (PLANBAR 2016-1 Release) and the
Oxford Stalls Installation Instructions
Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or
Assembly & Installation Guide (Metric)
Assembly & Installation Guide (Metric) INFRASTRUCTURE FOR LIFE RS Technologies www.rstandard.com Email Toll Free Phone Fax info@grouprsi.com +1 877 219 8002 +1 403 219 8000 +1 403 219 8001 2421 37th Avenue
MUNICIPAL INFRASTRUCTURE
2440 MUNICIPAL INFRASTRUCTURE 100 50 90 90 1220 305 65 65 45 MUNICIPALITY OR SERVICE OARD Department of Municipal Affairs and Environment Hon., Minister 40 100 50 50 WHITE REFLECTIVE ACKGROUND 1. LETTERING
SIG-030-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY I LUMINAIRE ARM 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) POLE CAP
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
Hyper ArmourMate. Joint Edge Protection INDUSTRIAL SLAB ON GROUND
Hyper ArmourMate INDUSTRIAL SLAB ON GROUND Full system edge protection Prevents concrete spalling at construction joints High FF and FL tolerances Extends the life-cycle of the floor and the asset Provides
Cast-in Ferrule Connections Load/Displacement Characteristics in Shear
Cast-in Ferrule Connections Load/Displacement Characteristics in Shear Ian Ferrier 1 and Andrew Barraclough 2 1 Product Manager - Connections, ITW Construction Systems ANZ. 2 Research and Development Manager,
A. Extent of structural precast concrete work is shown on drawings and in schedules.
SECTION 03 41 00 - STRUCTURAL PRECAST CONCRETE PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 specification