Sectional HDD Reamer Package
|
|
- Lizbeth Washington
- 5 years ago
- Views:
Transcription
1 Sectional HDD Reamer Package Recommended for Sand, Soft Soil, Sand Stone, Coral Mix and Gravel Carbides Internally welded leaving an external groove. Using a thin grinder blade, worn out carbides can be replaced and rewelded. Light Weight Barrel Allows the reamer to track back straighter and reduces deflection while being easier to handle and store. Large Cavity More room for soil and drilling fluids to mix. Flat Carbides 5/8 wide sharp edge carbides cuts debris and tree roots cleaner than existing industry shark tooth carbides. Standard Thread 2 3/8 thread will fit your machines adaptor.
2 Mixing Loops Extend past the reamer ring mixing fluids and soils like a blender. Reamer Heads Available in sizes ranging from 6 inches up to 24 inches. Mixing Soil Larger mixing area mixes soil and fluid more effectively. Fluid pressure is contained within the reamer to prevent over cutting of the bore hole. Large Allen Bolt Makes it easy to replace or change the reamer head. Swivel Tab Easy to remove and available in two sizes to fit standard industry swivels.
3 Swivel Tab Two sizes are available. Custom sizes can be ordered. Allen Bolt Simply remove and the reamer comes apart. Hex Shaft Fits all reamer sizes. No more buying heavy welded reamers. Common Thread All shafts come with 2 3/8-inch industry standard thread to fit your adaptor.
4 Optional O.D. push back cap used after pre-reaming. Tee handle wrench fits the hex shaft and allen bolt.
5 Over 8 years of field testing in many soil types and conditions this new technology back reamer is ready for your projects. The current available design works great in sand, soft soils, gravels and coral mixed soil conditions. Other testing has been completed in clay soils and we will soon be releasing a new clay reamer design. Field testing was completed on every type and design of carbide cutters. Pointed carbides also rip roots and leave debris within the bore hole. The flat 5/8 wide sharp edge carbides on our reamers mixes the fluids and soil more evenly while cutting roots and debris cleanly. Pointed carbides plow soils and will not mix soils and fluids evenly. Arborist have approved the flat sharp edge 5/8 carbides to bore under trees because roots are cut clean. Pipe pull back pressure is reduced because the back reamer makes a straighter back reamed hole. This reamer design works great in water table and sand conditions because the reamer is lighter weight and does not drop during the back-reaming process. Currently this is the only back reamer being used to install flat grade gravity sewer systems. Years of on the job field testing has proven that this reamer will last as long as any on the market. Our design uses lamination to create the strength while keeping the weight down. The lamination design makes this reamer even strong enough to cut holes through concrete manholes with reinforcement steel. The three-piece design allows the operator to change tool sizes using a simple allen wrench. No more pipe wrenches or stem wrenches. Once the allen bolt is removed, the swivel tab is unscrewed, and reamer is removed. The HDD machine operator can now pull the shaft up to the HDD rig and removes the shaft using the jaws on the rig. There are two types of swivel connection tabs available to fit the existing industry available swivels, without using clevises. If you pre-ream your installations, the convenient push back tool is quick to install and provides a smooth push back. Another benefit is the outer carbide cutters can be removed and replaced using a thin grinding wheel and welding replacement carbides in place. It is more cost effective not having to purchase expensive back reamers that come with a welded shaft. The harden steel shaft will last longer than the reamer head and replacement reamer heads are much more cost effective without having to purchase a new shaft every time you buy a reamer. Because of the light weight design, handling and storage is more convenient, you can pick up our 24-inch reamer with one hand. HDD TOOL STORE, LLC. TRENCHLESS TOOLS BUILT FROM FIELD EXPERIENCE
Holemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More informationSharewell, LP. LoTorque Hole Opener
Sharewell, LP LoTorque Hole Opener User Operating Manual Operating Procedures, Installation, and Maintenance Guide Office: 713-983-9818 Fax: 713-983-9820 Hole Opening Planning and Procedures Proper planning
More informationVIEWING OPTIONS: In Adobe PDF Viewer, from the main toolbar choose View, then Page Display, turn on Two-Up and Show Cover Page During Two-Up
VIEWING OPTIONS: To make our catalog easier to read we recommend using a two page display, as some sections have one page for the exploded view and one for the parts listing. Changing these settings will
More informationNEED HDD TOOLS, PARTS & ACCESSORIES?
NEED HDD TOOLS, PARTS & ACCESSORIES? Visit us on-line at straightlinehdd.com STRAIGHTLINE Produce Profitable Solutions In All Ground Conditions. THE RIGHT REAMER AVAILABLE FOR EVERY DRILL. StraightLine
More informationHOME WORKSHOP HANDBOOK Rugged BENCH GRINDER. By JOEL B. LONG
6 HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER W By JOEL B. LONG ITH this bench grinder you can keep your cutting tools sharp and do general offhand grinding, and can, with the aid of various attachments,
More informationHolemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
More informationASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?
ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and
More informationHorizontal Directional Drilling (HDD)
Horizontal Directional Drilling (HDD) Horizontal Directional Drilling (HDD) continues to be the most popular method of installing electrical cable, fiber optics, utility conduits and irrigation lines in
More informationPower Tool Accessories
Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Steel Hawg Cutters Threaded Steel Hawg Cutters Faster cutting: Alternating tooth form geometry makes fast work of cutting steel Long life: Abrasion-resistant
More informationWheeler Rex Ashtabula, Ohio Tel: Fax:
Wheeler Rex Ashtabula, Ohio Tel: 800 321 7950 Fax: 440 992 2925 wheeler@wheelerrex.com www.wheelerrex.com December 2012 There are three different types of shell cutters. Nominal Hole Size Part No. 4" 3395
More informationMASONRY DRILL and CHISEL
MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content
More informationc. Pins, bolts, and retaining rings b. Washers, locking nuts, and rivets
62 20 HW 8: Fasteners / Force, Pressure, Density Mechanical Systems DUE Mon, 11/21/16 Start of class Check link on website for helpful fastener information Please use a scantron. Material is based primarily
More informationAUGER TOOLS. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
AUGER TOOLS MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com AUGER TOOLS TABLE OF CONTENTS AUGER OVERVIEW... 3 HOLLOW STEM AUGERS... 4-12 2 1/4" Hollow Stem Augers...
More informationMotorized M3 AX7200 Rotary-Style Gasket Cutter Operating Instructions
Motorized M3 AX7200 Rotary-Style Gasket Cutter Operating Instructions INTRODUCTION Congratulations! You are the owner of the finest rotary-style gasket cutter in the world. Originally developed and patented
More informationThe new improved shaft is a Metric Steel Grade 10.9 Hex Head Bolt 10mm x 150mm. I had considered using the standard Steel Grade 8.
My edger is a Golden Boy Model KS-1505 MF. This edger was given to me in 1998 by a neighbor. This edger gifted to me was very used, it reminded me of the Golden Boy edger from when I was a young boy and
More informationA BORING GUIDE TO MATCH THE RIGHT REAMER TO THE JOB Your guide to selecting the best reamer to maximize production and save money on your next job.
A BORING GUIDE TO MATCH THE RIGHT REAMER TO THE JOB Your guide to selecting the best reamer to maximize production and save money on your next job. You wouldn t limit yourself to the drill bit that comes
More informationPliers. Pliers PLIERS
Pliers Pliers PILERS Long Nose Pliers With Side Cutter Comfortable two-component handles combine durability with a secure non-slip grip. High-leverage joint placement increases leverage to reduce the cutting
More informationKTSB14 Step Drill Bit #14 Double-Fluted, 3/16 to 7/8" Descriptions Description STEP DRILL BIT #14 DOUBLE-FLUTED, 3/16 TO 7/8"
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 KTSB14 Step Drill Bit #14 Double-Fluted, 3/16 to 7/8" Klein Tools Catalog Number Manufacturer Weight per unit Product
More informationBarrel and Tire Mineral Feeder Construction Instructions
Barrel and Tire Mineral Feeder Construction Instructions Dr. Matt Poore Department of Animal Science NCCE, NCSU Following is a description of how you assemble one of these barrel and tire feeders and accompanying
More informationSTRENGTH Aligned teeth provide superior gripping power over standard vertical teeth. STRENGTH Diamond serrated jaws provide a firm grip
STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth STRENGTH Diamond serrated jaws provide a firm grip PLIERS AND SNIPS Locking Pliers Slip Joint Pliers Electrician s Pliers
More information(Watertown, SD)
A Notes updated and cosmetic changes REV ph: 1.800.447.2781 DESC / PAGE NUMBERS AFFECTED fax: 903.957.0015 (Sherman, TX) 101911 DATE email: augertools@terex.com Rev 09/13/11 Spin-Bottom, Drill Bucket 3/4
More informationTRENCHLESS CONSTRUCTION METHODOLOGIES
TRENCHLESS CONSTRUCTION METHODOLOGIES Paragraph 2 of the Administrative Order issued by the Pennsylvania Department of Environmental Protection on January 3, 2018, to Sunoco Pipeline, L.P., ( Sunoco )
More informationAPPLICATION RANGE FEED STROKE FREE SPEED TORQUE mm 25 mm 100 Rpm 140 Nm. 300,0 mm. Body height: 13, mm 25 mm 100 Rpm 2,0 4,0 1,0
PanelMill F-35 The PanelMill attaches to the tube outside diameter by means of custom or specific clamp type jaws that provide strong clamping action that minimizes chatter and vibration. This rugged construction
More informationWORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
More informationComplete line of Holemaking Products and Accessories
Complete line of Holemaking Products and Accessories I N T R O D U C I N G Holemaking Products Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related
More information400 SERIES GRINDER PUMPS 41502, 42202,43302, AND MODELS
Section: MOYNO 500 PUMPS Page: 1 of 6 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 400 SERIES GRINDER PUMPS 41502, 42202,43302, AND 44402 MODELS DESIGN FEATURES Housing: Cast iron Pump Rotor: Chrome
More informationInvisible Clip Tutorial
Invisible Clip Tutorial I first saw what I call the Invisible Clip in Russ Fairfield s PMG gallery and fell in love with it. I could not figure out how he made them so I sent him an e-mail and he was kind
More information53932 Wood Boring Bit, 78" Features. Descriptions. Manufacturer Information. Taxonomies, Classifications, and Categories.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 53932 Wood Boring Bit, 78" Klein Tools Catalog Number 53932 Manufacturer Klein Tools Weight per unit 0.3500 (lbs/each)
More informationBENEFITS HAND-OPERATED BAILER BORING EQUIPMENT P SA Hand operated bailer boring set
In less-cohesive soils, below the groundwater level, a bailer and synthetic casing tubes can be used. For ergonomic reasons a casing tube platform is used. For drilling into the ground and taking soil
More information18000 HDL FOUR POST LIFT LB CAPACITY INSTALLATION AND OWNER'S MANUAL
18000 HDL FOUR POST LIFT 18000 LB CAPACITY INSTALLATION AND OWNER'S MANUAL WARNING! Do not raise a vehicle unless the front stops are in place, the parking brake is set, and the wheels are chocked. Stay
More informationMILWAUKEE TOOLS
INDEX ACCESSORIES BATTERY PACKS/CHARGER... 14-7 BIT EXTENSION... 14-9 BLADES BAND SAW... 14-7 CIRCULAR SAW... 14-10 SHEAR FOR MODEL 6850... 14-7 HOLE SAW KITS... 14-8 HOLE SAWS 4/6 BI-METAL... 14-8 ARBORS...
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
More informationB-Too Drilling and Tapping Machine Instruction and Maintenance Manual
B-Too Drilling and Tapping Machine Instruction and Maintenance Manual Thank you for your purchase of the B-Too Drilling and Tapping Machine. Please read and understand this short operation manual. Our
More informationGuidelines to install products with HDD.
On grade drilling!!! Guidelines to install products with high precision on grade using HDD. Challenges step by step Soil conditions A drillhead is always looking for the path of least resistance Soil with
More informationUNIT 2.1: Routine check before machines operation. Unit Objectives Tools and Equipment for Routine Check. Spanner Set
UNIT 2.1: Routine check before machines operation Unit Objectives At the end of this unit, you will be able to: 1. Learn about the tools and equipment used for routine check-up of the jack hammer. 2. Types
More informationPower Tool Accessories
Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Step Drill Bits Step Drill Bits Milwaukee Step Drill Bits with JAM-FREE Performance feature a dual-flute design delivering up to 2X faster hole times,
More informationST SHIPO DRILLING
ST 1.2.1 SHIPO DRILLING Version : 2 March 2014 Published by : Foundation Connect International Authors : Henk Holtslag & Walter Mgina Disclaimer This manual is part of the main manual, named ST 1 Wells.
More informationCS Unitec, Inc. 22 Harbor Avenue, Norwalk, CT Phone: Toll-free:
CS Unitec, Inc. 22 Harbor Avenue, Norwalk, CT 06850 Phone: 203-853-9522 Toll-free: 800-700-5919 Email: info@csunitec.com CS Unitec, Inc. 22 Harbor Avenue, Norwalk, CT 06850 Phone: 203-853-9522 Toll-free:
More informationStanley Hand tools Stanley FatMax push-lock adjustable joint pliers. 3 piece Stanley FatMax pushlock. Stanley FatMax groove joint pliers.
Stanley FatMax push-lock adjustable joint pliers Slip-resistant Bi-Material handle for a comfortable grip. Multipurpose jaws designed to grasp flat and round objects. Push-Lock technology allows for quick
More informationTRAINING MANUAL. Part 3 REAMERS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 3 REAMERS 1 Purpose of Reamers REAMERS A reamer produces an accurate and highly finished round hole to a much finer tolerance than that produced by a drill.
More informationPlans & Materials List for Handwashing Station
Plans & Materials List for Handwashing Station Required Tools Arc Welder (mig or stick) Chop or metal band saw Grinder (bench and/or handheld) 3/8" Drill 1/8", 1/4", 5/16" Drill Bits Copper Pipe Cutter
More informationHDD TOOLING FOR McCLOSKEY
HDD TOOLING FOR McCLOSKEY HDD TOOLING FOR McCLOSKEY TRANSMITTER HOUSINGS: BOLT-ON SIDE-LOAD, BOLT-ON TRANSMITTER HOUSINGS Designed for 2-cell DigiTrak Transmitters Heat-treated, chrome-nickel-moly alloy
More informationProduct Overview. Electric Pneumatic Hydraulic. Concrete and Masonry Dust Collection Systems Hot Work Zone Tools
Electric Pneumatic Hydraulic Product Overview Metalworking Surface Finishing Surface Preparation Concrete and Masonry Dust Collection Systems Hot Work Zone Tools www.csunitec.com Metalworking In the shop
More informationIADC Dull Grading for PDC Drill Bits
IADC Dull Grading for PDC Drill Bits SPE/IADC 23939 First Revision to the IADC Fixed Cutter Dull Grading System ~ 1992 Version 2.4 How is Dull Grading Useful? Quick and simple way to describe the dull
More informationTechnical Training USG Saw Chain Grinder
Technical Training USG Saw Chain Grinder 1 USG HOS The STIHL USG Universal Sharpener will sharpen all types of saw chain. This is by far the most versatile and accurate machine of its type on the market.
More informationGeneral Information. Ball Curb Valve
General Information 1. All Jones Curb Valves are manufactured in accordance with the AWWA Standard C-800-latest revision. 1. Copper Alloy CDA No. C83600 (85-5-5-5) 2. Copper Alloy CDA No. 89520 (Low Lead)
More informationBy C.W. Woodson From the pages of Model Craftsman magazine June, 1937
By C.W. Woodson From the pages of Model Craftsman magazine June, 1937 As shown in Fig. 1, the tool post grinder for which plans are given here can be used to finish up delicate work to more accurate dimensions
More informationWorkshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP
Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292
More informationHDL(M)6 Nut/Screw Assembly
HDL(M)6 Nut/Screw Assembly Remove, repair, and reassemble the nut and screw assembly in your HDL series double lock vise. In these instructions when we refer to the front of the vise or nut/screw assembly,
More informationDrill Bits & Hole Saws
F o r P Drill Bits & Hole Saws r o f e s s i o n a l s. Klein drill bits provide accuracy and consistency for professionals. Made of top-of-the-line materials for longer-lasting performance, Klein drill
More informationExplorer Wiring Kit (assembled)
Explorer Wiring Kit (assembled) For Vintage, Firestorm & Standard Series Please Read All Instructions Before Beginning. Tools you will need: Soldering Iron (35 watt preferably) Solder Wet Sponge Wire Clippers
More information1503 Follow Spot Yoke, Source Four LED
1503 Follow Spot Yoke, Source Four LED Rev 1.0 2016 City Theatrical, Inc. Getting Started with the City Theatrical Follow Spot Yoke for source four LED Congratulations on the purchase of your City Theatrical
More informationBY LACKMOND TILE PRODUCTS AND SOLUTIONS EQUIPMENT ACCESSORIES DIAMOND TOOLS
TILE PRODUCTS AND SOLUTIONS EQUIPMENT ACCESSORIES DIAMOND TOOLS BEAST 10" WET TILE SAW BLADE SIZE: MOTOR CAPACITY: RIP CUT CAPACITY: DIAGONAL CUT CAPACITY: DEPTH OF CUT AT 90 : DEPTH OF CUT AT 45 : BEVEL:
More informationIDR assembly instructions:
IDR assembly instructions: Required Tools: 2 X 12mm Open End Wrench 14mm open end wrench #2 Phillips Head Screw Driver (Drill with adjustable torque clutch recommended) 8mm nut driver (Supplied in IDR-AK)
More informationCHIP AND DUST EXTRACTION SYSTEMS
CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories
More informationAgricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
More informationOther Lathe Operations
Chapter 15 Other Lathe Operations LEARNING OBJECTIVES After studying this chapter, students will be able to: Safely set up and operate a lathe using various work-holding devices. Properly set up steady
More informationReady To Go SimpleSpec tm. Installation Manual. For more information, please visit 3-form.com or call
Contents Overview ( 1) 3/8" Varia Panel = Cable Tensioner with Cover Plate KIT Stainless Steel: 3-15-1636-K Black Oxide: 3-15-2005-K Cable Tensioner with Cover Plate SS: 3-15-1636 BO: 3-15-2005 + M8 Thread
More informationMECHANIC VISES VERSATILE, RUGGED AND BUILT WITH YOU IN MIND A B
wiltontool.com Wilton is committed to being a supplier you can depend on for the epitome of quality, innovation and service. This isn t just a statement to make us sound good it s a reality that has been
More informationWith time, the evolution of anchors have led to different designs More than one anchor type may be suitable for a particular purpose Thus there are
Supreme range of Soil & rock anchors Introduction Used to anchor into concrete, masonry, stone With time, the evolution of anchors have led to different designs More than one anchor type may be suitable
More informationLOC ATING COMPONENTS. Locating Components
Adjustable Jack Screws... 212 Adjustable Locating Buttons... 212 Alloy Steel Pull Dowel Pins...198 199 Bullet Nose Dowels... 219 Bullet Nose Pins... 220 Drift Handles... 213 Fixture Jacks... 212 Fixture
More informationHDD Training. HDD Equipment and Tooling. Mark Miller, PE Jon Robison, PE
HDD Training HDD Equipment and Tooling Mark Miller, PE Jon Robison, PE HDD Drill Rigs Horizontal Directional Drilling (HDD) drill rigs come in various shapes and sizes. The small drill rigs are usually
More informationMODELS 49 RA 49 RAZ 49 RAC
General Safety and Maintenance Manual MODEL grinder featuring a rear exhaust. Model Number Exhaust Direction REAR Throttle Type (L) Lever or (K) Safety Lever Speed 12000 to 14000 R.P.M (13500rpm is standard)
More informationREGATTA PATH LIGHT (RGP)
NEEDED FOR INSTALLATION: 5/64 & 5/32 Allen Wrench Waterproof Wire Connectors Warning Low Voltage Hot Surface Wear Gloves By Others Gloves IMPORTANT SAFETY INFORMATION - READ, FOLLOW, AND SAVE THESE INSTALLATION
More informationAkron (800) Bentleyville (800) Erie (800) Meadville (800) Warren (800) Youngstown (800)
Stock and Pricing as of DECEMBER 1st - Applies to Current Stock Available* Circular Saw Blade 3-Pc. Step Drill Set 7-1/4 Carbon Tipped Precision honed C3 carbide tips; 40 TPI Heat/vent expansion slot design
More informationFOUNDATION AUGERS. FOR USE ON THE FOLLOWING CARRIES Foundation Drill Rigs
FOR USE ON THE FOLLOWING CARRIES Foundation Drill Rigs PENGO AUGER SOIL CHART Pengo has developed the chart below to help you decide which auger will be best suited for your project. The above triangles
More informationKURT D810 AngLock Vise Base Assembly
KURT MANUFACUTRING - LIFETIME IRONCLAD TM WARRANTY All Kurt Manufacturing Company industrial workholding products and parts with the exceptions noted below, are warranted against defects in material and
More informationElectrical Construction Name:
Tools of the Trade The following are common tools that are used in the electrical industry. This hand-out is to help familiarize you with the tools, the terminology, and their use. Retractable Steel tape
More informationUnderwater Tool Section
Underwater Tool Section Tools for Underwater Construction, Salvage and Demolition Stanley Hydraulic Tools is a leading worldwide provider of underwater hydraulic tools to professional divers, marine maintenance,
More informationFastener Type Chart. Fastener Categories. Sheet Metal Screws Fully threaded screws with a point for use in sheet metal. Abbreviated SMS.
Fastener Categories Wood Screws Machine Screws Thread Cutting Machine Screws Screws with a smooth shank and tapered point for use in wood. Abbreviated WS. Screws with threads for use with a nut or tapped
More informationMANUFACTURING TECHNOLOGY
MANUFACTURING TECHNOLOGY UNIT V Machine Tools Milling cutters Classification of milling cutters according to their design HSS cutters: Many cutters like end mills, slitting cutters, slab cutters, angular
More informationTools for Plumbing. Introduction
2 Tools for Plumbing Introduction So far, we have studied the importance of plumbing system, its stages and the role and responsibilities of a plumber. We will now look at the various tools that help a
More informationRTI TECHNOLOGIES, INC.
RTI TECHNOLOGIES, INC. BRC500 & BRC550 Arbor/Spindle Mechanism Adjustment & Service Technical Instructions The arbor/spindle mechanism of the BRC500/550 is designed to be robust for long life. Occasionally
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationARMADOR Consultancy Machinery Export Ltd.
ARMADOR Consultancy Machinery Export Ltd. Rotary Bored Piling Tools Catalogue 07 ARMADOR Danışmanlık Müm. Makina Metal Sanayi İç ve Dış Tic. Ltd. Şti. Kucukesat Ballibaba Sokak No. 89/A Cankaya 06660 Ankara
More informationRELINER INSIDE DROP SYSTEM SPECIFICATIONS
1. PRODUCT NAME RELINER INSIDE DROP SYSTEM U.S. Patent 6074130 Canadian Patent # 2269565 All RELINER Products are proudly made in the U.S.A. 2. MANUFACTURER RELINER /Duran Inc. 53 Mount Archer Rd. Lyme
More informationBIT BROKERS INTERNATIONAL, LTD. PRODUCTS & SERVICES
BIT BROKERS INTERNATIONAL, LTD. PRODUCTS & SERVICES 01 Products & Services www.bitbrokers.com bit brokers international Bit Brokers International, Ltd. was founded by President/CEO Tim Thomas on May 10,
More informationLathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY
TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form
More informationBBF Series Blower Base Frame Assembly Instructions Rev.: BFA-9105
BBF Series Blower Base Frame Assembly Instructions Rev.: BFA-9105 These assembly instructions are to be used as a general reference guide to facilitate assembly. Please consult the blower, bushing, sheave,
More informationAUTOMATED MACHINE TOOLS & CUTTING TOOLS
CAD/CAM COURSE TOPIC OF DISCUSSION AUTOMATED MACHINE TOOLS & CUTTING TOOLS 1 CNC systems are used in a number of manufacturing processes including machining, forming, and fabrication Forming & fabrication
More informationHollow Stem Auger Modifications
Hollow Stem Auger Modifications Auger Extensions Auger Extensions are used to compensate for the distance from the ground up to the rig. To order these extensions please specify: 1. Length: standards are
More informationInventory (Figure 2)
MODEL T10127 12" SPIRAL CUTTERHEAD INSTRUCTIONS The Model T10127 indexable insert spiral cutterhead is designed to replace the straightknife cutterhead from the Grizzly jointer Model G0609. The total procedure
More informationPower Tool Accessories
Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Masonry Diamond Cutting Diamond Cutting Blades Milwaukee Diamond Cutting Blades are designed to the highest standards only using quality diamonds.
More informationINSTRUCTION MANUAL AND PARTS LIST MODEL 14-10
VERTICAL BAND SAWS INSTRUCTION MANUAL AND PARTS LIST MODEL 1-10 DAKE/PARMA WHEN ORDERING PARTS GIVE COMPLETE SERIAL NUMBER OF MACHINE GIVE PART NUMBER AND NAME GIVE AMOUNT REQUIRED Unless the above data
More informationCONTINUOUS SAMPLING SYSTEMS
For over 0 years, Mobile s OVERSHOT WIRELINE CONTINUOUS SAMPLING SYSTEM has been recognized as the leading method for obtaining continuous samples while drilling in cohesive soils - fast, effective, hollow
More information5.1 MUELLER CORPORATION VALVES. MUELLER 300 Ball Type Corporation Valves
MUELLER CORPORATION VALVES 5.1 Shaded area indicates changes Rev. 4-14 Machine inserted corporation stops were developed by Hieronymus Mueller in conjunction with his development of the drilling and tapping
More informationDrawbars for Milling Machines
Machine Tool & Drawbars for Milling Machines Made in USA Drawbars from low carbon steel, soft and black oxide plated. Drawbars are manufactured from two parts the shaft and the hex. Drawbars for Milling
More informationMODULE INTRODUCTION TO HAND TOOLS. (00103 LESSON 2 of 2) SLIDE PRESENTATION
MODULE 00103-09 INTRODUCTION TO HAND TOOLS (00103 LESSON 2 of 2) SLIDE PRESENTATION SLIDE 33A 12.0.0 SQUARES Squares are used for marking, checking, and measuring. The common squares are the carpenter
More informationFord F150 Front Bumper
2009-2011 Ford F150 Front Bumper Warning! Read the instructions completely before beginning the installation. Before tightening bolts, drilling or cutting where required, check to make sure that there
More informationAddendum for the Installation of the Lingenfelter 10 Bolt Supercharger Pulley Hub Kit
Addendum for the Installation of the Lingenfelter 10 Bolt Supercharger Pulley Hub Kit PN: L250150309 Lingenfelter Performance Engineering 1557 Winchester Road Decatur, IN 46733 (260) 724-2552 (260) 724-8761
More informationHEAVY DUTY GASKET CUTTER
HEAVY DUTY GASKET CUTTER GUIDE TO PERFECT GASKETS CUTTING GASKETS 1 TO 13 IN DIAMETER: 1. Lay out gasket outer diameter (OD), inner diameter (ID) and bolt holes on template or gasket material. See section
More informationThe Universal Table Saw Sled
The Universal Table Saw Sled Do Precision Work Even with Inexpensive Table Saws! Table saw blades always tend to move the wood while the cut is being made. This is why it's so difficult to get accurate
More informationBy Professor Parabellum
By Professor Parabellum Introduction The following lightweight and highly compact machine pistol design is quick to manufacture and contains a low number of components. It's minimalist layout incorporates
More informationBlock Foundation. From the 1950s through the 80s. Hydraulically driven. piers provide bearing. for a settling foundation
RESCUING FIXING A A Block Foundation Hydraulically driven piers provide bearing for a settling foundation From the 1950s through the 80s before poured concrete became the norm many homes in northern New
More informationBuilding Bigger Things. Woodworking Tools and Machinery. Marking Gauge. Thumb Screw. Stop Screw. Shoe. Beam. Pin. Head. Face Plate
Woodworking Tools and Machinery Pin Shoe Face Plate Thumb Screw Head Stop Screw Beam Marking Gauge A marking gauge is used to mark a uniform width on a board. The steel combination square discussed in
More informationDrilled Shaft Inspector CBT Lesson 2 Equipment and Tools Welcome to the Drilled Shaft Inspector Course. This is Lesson 2, Equipment and Tools.
Drilled Shaft Inspector CBT Lesson 2 Equipment and Tools Welcome to the Drilled Shaft Inspector Course. This is Lesson 2, Equipment and Tools. In this lesson we will discuss the typical equipment and tools
More informationSheet Metal Brake Plans for a 6' Sheet Metal Brake
Sheet Metal Brake Plans for a 6' Sheet Metal Brake,1752'8&7,21 Thank you for purchasing the sheet metal brake plans. The plans include a complete list of material needed and easy to follow steps to build
More informationAvoiding Common Problems in Saw Preparation
Avoiding Common Problems in Saw Preparation Bruce Lehmann, P.Eng, Ph.D. This talk draws on the expertise of experienced sawfilers, and some research results to show practical techniques and possible problems
More informationCRIMPED WIRE WHEELS JET PREMIUM WIRE WHEELS JET premium wire wheels have set the standard in industry as the best performing bench wire wheel for metal applications Heavy wire fill and the best piano wire
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. Hand or power. kpa/34.
MUELLER SMALL DRILLING MACHINES 2.1 Shaded area indicates change Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines
More information