METAL FRAMING WALL+ FEATURES
|
|
- Francis Leonard
- 5 years ago
- Views:
Transcription
1 METAL FRAMING WALL+ FEATURES
2 Load Families &Schedules Load Families & Schedules loads sample schedules, sample framing and connection families to the current project. You can find the families in Project Browser Families, under Structural Connections and Structural Framing categories. Sample schedules can be found under Schedules/Quantities in Project Browser. Note: User can modify those schedules and use them as templates for making shop drawings. 2
3 Framing Configuration Framing Configuration define all framing settings. It allows user to configure and save settings for all sorts of frames main wall Frames and Secondary Frames. It is very versatile with thousands of different possibilities. 3
4 Wall Link Wall Link makes a link between wall type from the project and configuration. Choose the wall type you want to link and apply framing configuration to the layers. 4
5 Frame Wall Frame Wall frames selected walls from the model according to predefined configuration. 5
6 Update Frame Update Frame updates the frame if there are any changes made to a wall, e.g. window was moved, or wall extended. Select a wall, window, door or any frame from the wall: 6
7 Add Secondary Frame Add Secondary Frame adds secondary frame to selected walls. Secondary Frame layer needs to be predefined using Wall Link: 7
8 Add Details/Update Details Add Details/Update Details function for placing details in the end of framing process. Recommended workflow: create frame without details; add additional elements; split elements if needed; and in the final step - add details. This will allow to save time in updating process when you frame a wall. 8
9 Add Details/Update Details User can predefine the details in Framing Configuration, but during the framing process the details will be not added if Use Add Details command will be selected: 9
10 Add Bracing between Studs\Plates Add Bracing between Studs\Plates adds bracing between two studs\plates you choose. To configure settings go to Framing Configuration select configuration you use in the wall Bracing. 10
11 Add Bracing between Studs\Plates Select bottom plate and then middle plate to show bracing ends 2 2 Select middle plate and then top plate to show bracing ends
12 Add Strapping Bracing (external or internal side) Add Strapping Bracing (external or internal side) adds bracing between two studs\plates you choose to external or internal side of framing. To configure settings go to Framing Configuration select configuration you use in the wall Bracing. 12
13 Add Strapping Bracing (external or internal side) External View 2 1 Select bottom plate and then top plate to show external bracing ends 13
14 Add Strapping Bracing (external or internal side) Sample with strapping bracing from external and internal sides: I_MF Strap family has instance Connection Type parameter which allows to add Gusset plate: You can use any other custom connection family if needed. 14
15 Add Additional Bridging/Nogging/Blocking Add Additional Bridging/Nogging/Blocking adds additional bridging/nogging/blocking between two selected studs. 1 2 Select two studs predefine the offset from wall top or bottom 15
16 Add Additional Stud Add Additional Stud adds additional stud with offset from any selected stud or wall end. Select a stud predefine the offset from the stud or wall ends 16
17 Add Additional Support Stud Add Additional Stud adds additional support stud between selected plates. Select two plates predefine the offset from the wall end 17
18 Delete Additional Elements Delete Additional Elements deletes additional elements which were added before. Also you can delete it by ticking Delete through Modify Additional Element: 18
19 Add/Delete Details Add or Delete Additional Details distributes details on the plates and studs according predefined rules. Select a stud predefine the detail family, offset, spacing, location and amount of details. 19
20 Add/Delete Details Sample with 3 hole details on the stud face. Detail families can be modified if needed. 20
21 Manage Walls Manage Walls shows information about walls in a convenient dialog window. Every wall is displayed in a separate row and indicated by color. On the right side you can see the color legend. After selection in the dialog you will see this selection in the project. Also, you can easily filter the walls in the tree on the left side. 21
22 Delete Frame Delete Frame deletes selected framing. You just need to select one frame and the tool will delete the whole frame from the wall. 22
23 Align Studs with Main Frame Align Studs with Main Frame use it if secondary frame studs have to be aligned with main frame studs. Select any stud from the secondary frame and it will aligned. 23
24 Align Studs with Other Element Align Studs with Other Element aligns studs with trusses, truss system grids or studs from other frames. 24
25 Align Studs with Other Element Steps: 1. Run Align Studs with Other Element Select any Structural Framing element (for example, truss bottom chord or element from Truss System Grid) 2. Select a stud from the frame that has to be aligned 1 OR
26 Align Studs with Other Element Result all studs from the frame are aligned: 26
27 Align Studs with Two Other Elements Align Studs with Two Other Elements aligns studs with two selected trusses, truss system grids or studs from other frames 27
28 Align Studs with Two Other Elements Steps: 1. Run Align Studs with Two Other Elements select two Structural Framing elements (for example, truss top chord or two elements from Truss System Grid): 2. Select a stud that has to be aligned: 28
29 Align Studs with Two Other Elements Result all studs from the frame are aligned 29
30 Align Opening Cripples with Studs Align Opening Cripples with Studs aligns opening cripples with trusses, truss system grids or studs from other frames. 30
31 Align Opening Cripples with Studs Steps: 1. Run Align Opening Cripples with Studs 2. Select any cripple above the opening Result all cripples above the opening are aligned 31
32 Clear Opening Cripples Alignment with Studs Clear Opening Cripples Alignment with Studs returns alignment of cripples to default. 32
33 Modify Wall Framing Modify Wall Framing modifies selected wall framing with custom settings if you need to make unique changes. All configuration settings are the same as in Framing Configuration. 33
34 Modify Opening Framing Modify Opening Framing modifies selected opening framing with custom settings if you need to make unique changes. All configuration settings are the same as in Framing Configuration. 34
35 Modify Wall Join Framing Modify Wall Join Framing modifies selected join with custom settings if you need to make unique changes. All configuration settings are the same as in Framing Configuration. 35
36 Modify Wall Join Framing When modifying joins please pay attention to stud you are selecting. The tool will recognize whether the corner is outer or inner and give you different options in modification dialog to modify Butt (B) or L corner: 36
37 Modify Additional Element Modify Additional Element modifies selected additional element with custom settings if you need to do unique changes. All configuration settings are the same as in Framing Configuration. 37
38 Update Framing/Opening by Wall Link Update Framing/Opening by Wall Link reframes frame or selected opening to the default that is configured under Framing Configuration. 38
39 Save Configuration w/o Openings Save Configuration w/o Openings saves configuration of selected frame without settings for openings. This feature is very useful if you have already framed a wall and lost configuration that was used for this wall. Configuration is required to frame new walls. 39
40 Save Configuration w/o Openings You just need to select any frame from a wall and save configuration under your desired name: Now you will be able to use this configuration for new or existing walls: 40
41 ENJOY WORKING WITH OUR PRODUCTS! AGA CAD Ltd T: E: W:
WOOD FRAMING WALL+ FEATURES
WOOD FRAMING WALL+ FEATURES Load Families &Schedules Load Families & Schedules loads sample framing, connection families and sample schedules to the current project. You can find the families in Project
More informationWOOD FRAMING FLOOR+ FEATURES
WOOD FRAMING FLOOR+ FEATURES Load Families &Schedules Load Families & Schedules loads sample framing, connection families and sample schedules to the current project. You can find the families in Project
More informationWOOD FRAMING ROOF+ FEATURES
WOOD FRAMING ROOF+ FEATURES Load Families & Schedules Load Families & Schedules loads sample framing, connection families and sample schedules to the current project. You can find the families in Project
More informationMETAL FRAMING Wall+ SHOP DRAWINGS
METAL FRAMING Wall+ SHOP DRAWINGS Shop Drawings Finish your modeling with built-in shop drawing generator and deliver your wall framing estimation the same hour. Build your complete shop drawings with
More informationMETAL FRAMING WALL+ FRAMING CONFIGURATION
METAL FRAMING WALL+ FRAMING CONFIGURATION Framing Configuration Framing Configuration definition of all framing parameters. It allows to configure and save settings for all sorts of frames main wall Frames
More informationMETAL FRAMING FLOOR+ FRAMING CONFIGURATION
METAL FRAMING FLOOR+ FRAMING CONFIGURATION Framing Configuration Framing Configuration here user can define all framing parameters. It allows user to configure and save settings for all sorts of frames
More informationMETAL FRAMING ROOF+ FRAMING CONFIGURATION
METAL FRAMING ROOF+ FRAMING CONFIGURATION Framing Configuration Framing Configuration here user can define all framing parameters. It allows user to configure and save settings for all sorts of frames
More informationWOOD FRAMING ROOF+ FRAMING CONFIGURATION
WOOD FRAMING ROOF+ FRAMING CONFIGURATION Framing Configuration Framing Configuration here user can define all framing parameters. It allows user to configure and save settings for all sorts of frames main
More informationWOOD FRAMING ROOF+ SHEATHING and PANELING LAYOUTS
WOOD FRAMING ROOF+ SHEATHING and PANELING LAYOUTS Sheathing and Paneling Layouts Wood Framing Roof+ automates sheathing and paneling layout creation. Sheathing or paneling layouts can be easily generated
More informationWOOD FRAMING WALL+ SHEATHING and PANELING LAYOUTS
WOOD FRAMING WALL+ SHEATHING and PANELING LAYOUTS Sheathing and Paneling Layouts Wood Framing Wall+ automates sheathing and paneling layout creation. Sheathing or paneling layouts can be easily generated
More informationMETAL FRAMING RAFTER+ Split Beam Systems
METAL FRAMING RAFTER+ Split Beam Systems Split Beam System Revit doesn t have any possibility to control a distance of the first and last rafter spacing of Beam System. It is the main reason to use the
More informationSMART ASSEMBLIES Dimensioning Rules
SMART ASSEMBLIES Dimensioning Rules EDIT DIMENSIONING RULES Main Element Geometry 1 4 3 1 possible dimensioning options area and notes about current operation 2 preview of selected options effects 3 preview
More informationGetting Started with Revit
AUTODESK Autodesk REVIT Revit TRAINING Training TUTORIAL Tutorial Getting Started with Revit FOCUS Focus KUWAIT Kuwait CAD Cad Team 2012-13 Step 01 02 Grid & levels Grid create 5 vertical grid lines grid
More informationAdvance Steel suite 6.1 / SP2
Advance Steel suite 6.1 / SP2 This document describes only the improvements in Service Pack 2 compared to Service Pack 1. The installation of SP2 includes SP1; please see the previous document for improvements
More informationAdvance Steel 2010 / SP2
Advance Steel 2010 / SP2 This document describes the improvements in Service Pack 2 for Advance Steel 2010. Advance Steel 2010 SP2 is Windows 7 compliant! BOM/LISTS New sorting option in Drawing index
More informationCONTENTS CHAPTER 1 WHAT THIS IS ALL ABOUT...
CONTENTS CHAPTER 1 WHAT THIS IS ALL ABOUT... 17 INTRODUCTION... 17 Terminology... 18 MACINTOSH AND WINDOWS... 20 CONVENTIONS USED IN THIS TUTORIAL... 21 Command Menu Title And Pull-Down Menu... 22 Commands,
More informationChief Architect New Feature List
SYSTEM / PERFORMANCE Chief Architect Premier X4 is available in 64 bit and 32 bit versions. The 64 bit version is more efficient in managing memory and you will see better performance on larger plan files
More informationApplied Steel Detailing Tekla Structures 11.0 Basic Training February 10, 2005
Tekla Structures 11.0 Basic Training February 10, 2005 Copyright 2005 Tekla Corporation Contents Contents...i 1...3 1.1 AutoConnections...4 1.2 General about the Criteria for Creating Connections...6 1.3
More informationIDEA Connections. User guide
IDEA Connections user guide IDEA Connections User guide IDEA Connections user guide Content 1.1 Program requirements... 4 1.1 Installation guidelines... 4 2 User interface... 5 2.1 3D view in the main
More informationMaking a Custom Symbol. Making a Custom Symbol in Chief Architect
TIP in Chief Architect INTRODUCTION Being able to make your own symbols in Chief Architect can be very useful. Not many users take the time to learn how to do this because they believe it to be a difficult
More informationIDEA Connection 8. User guide. IDEA Connection user guide
IDEA Connection user guide IDEA Connection 8 User guide IDEA Connection user guide Content 1.1 Program requirements... 5 1.2 Installation guidelines... 5 2 User interface... 6 2.1 3D view in the main window...
More informationAdvance Steel. Tutorial
Advance Steel Tutorial Table of contents About this tutorial... 7 How to use this guide...9 Lesson 1: Creating a building grid...10 Step 1: Creating an axis group in the X direction...10 Step 2: Creating
More informationAutodesk Advance Steel. Drawing Style Manager s guide
Autodesk Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction... 5 Details and Detail Views... 6 Drawing Styles... 6 Drawing Style Manager... 8 Accessing the Drawing Style
More informationAdvance Steel. Drawing Style Manager s guide
Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction...7 Details and Detail Views...8 Drawing Styles...8 Drawing Style Manager...9 Accessing the Drawing Style Manager...9
More informationRelease Notes - Fixes in Tekla Structures 2016i PR1
Release Notes - Fixes in Tekla Structures 2016i PR1, you can now set the to either or. is modified., the ID of the connection plate is not changed anymore when the connection now uses normal rebar groups
More informationIDEA Connection 8. User guide. IDEA Connection user guide
IDEA Connection user guide IDEA Connection 8 User guide IDEA Connection user guide Content 1.1 Program requirements... 5 1.2 Installation guidelines... 5 2 User interface... 6 2.1 3D view in the main window...
More informationMWF Rafters. User Guide
MWF Rafters User Guide September 18 th, 2018 2 Table of contents 1. Introduction... 3 1.1 Things You Should Know Before Starting... 3 1.1.1 Roof Panels Structure Orientation... 3 1.1.2 Member Selection...
More informationRelease Notes - Fixes in Tekla Structures 2016i SP1
Release Notes - Fixes in Tekla Structures 2016i SP1 is modified., the ID of the connection plate is not changed anymore when the connection now uses normal rebar groups instead of tapered groups., the
More informationRevit Structure 2012 Basics:
SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural
More informationAUGI Tips and Tricks: The Reunion Tour Autodesk Revit Style
AUGI Tips and Tricks: The Reunion Tour Autodesk Revit Style Donnia Tabor-Hanson Cope Architecture AB3279 After many years of having a successful Autodesk University class on AUGI tips and tricks featuring
More informationTABLE OF CONTENTS. INTRODUCTION...5 Advance Steel...5 Where to find information?...6 Contacting technical support...6
TABLE OF CONTENTS INTRODUCTION...5 Advance Steel...5 Where to find information?...6 Contacting technical support...6 INSTALLATION...7 System requirements...7 Starting the installation...7 STARTING ADVANCE
More informationApplied Precast Concrete Detailing
Applied Precast Concrete Detailing Tekla Structures 11.0 August 30, 2005 Copyright 2005 Tekla Corporation Copyright 2005 Tekla Corporation Applied Precast Concrete Detailing i Copyright 2005 Tekla Corporation
More informationRevit Structure 2013 Basics
Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial
More informationFor Evaluation Only. Copyrights
xi Dedication Foreword Acknowledgments About the Author Accessing Tutorial Files Free Teaching Resources for Faculty Dimension Units and Dialog Box Captures Preface Chapter 1 - Introduction to Autodesk
More informationIntroduction to Parametric Modeling AEROPLANE. Design & Communication Graphics 1
AEROPLANE Design & Communication Graphics 1 Object Analysis sheet Design & Communication Graphics 2 Aeroplane Assembly The part files for this assembly are saved in the folder titled Aeroplane. Open an
More informationDraw IT 2016 for AutoCAD
Draw IT 2016 for AutoCAD Tutorial for System Scaffolding Version: 16.0 Copyright Computer and Design Services Ltd GLOBAL CONSTRUCTION SOFTWARE AND SERVICES Contents Introduction... 1 Getting Started...
More informationAutodesk Revit Architecture 2014
ISI ACADEMY Autodesk Revit Architecture 2014 Getting Started Starting Revit Starting Revit for the First Time Opening a Project File Identifying the User Interface Managing User Interface Understanding
More informationAssignment 13 CAD Mechanical Part 2
Assignment 13 CAD Mechanical Part 2 Objectives In this assignment you will learn to apply the hatch and break commands along with commands previously learned. General Instructions Hatching 1. When AutoCAD's
More informationModule 2.1, 2.2 Review. EF101 Analysis & Skills Module 2.3. Sketched Features and Operations. On-line Help Two Locations
EF101 Analysis & Skills Module 2.3 Engineering Graphics Revolved Features Placed Features Work Features Module 2.1, 2.2 Review What are the three types of operations for adding features to the base feature?
More information7.1. NEW FEATURES IN Advance Steel MODELING FABRICATION DRAWING. LISTS and NC FILES
/ NEW FEATURES IN Advance Steel 7.1 MODELING FABRICATION DRAWING LISTS and NC FILES TABLE OF CONTENTS Technology... 5 Technology 1: Unicode compatibility... 5 Technology 2: Unique ID for synchronization...
More informationWorking with Detail Components and Managing DetailsChapter1:
Chapter 1 Working with Detail Components and Managing DetailsChapter1: In this chapter, you learn how to use a combination of sketch lines, imported CAD drawings, and predrawn 2D details to create 2D detail
More informationSheet Metal OverviewChapter1:
Sheet Metal OverviewChapter1: Chapter 1 This chapter describes the terminology, design methods, and fundamental tools used in the design of sheet metal parts. Building upon these foundational elements
More informationimos Getting Started
imos 12.0 - Getting Started June 2015 imos Aktiengesellschaft Planckstraße 24 D-32052 Herford Tel. +49(0)5221.976-0 Fax +49(0)5221.976-123 info@imos3d.com www.imos3d.com This document is provided just
More informationPrecut Value Shed Manual Gambrel Barn
Tools Needed: -Cordless Drill (12V or higher) -#2 Square Drive Bit -Hammer -6 Step Ladder -Tape Measure -Square utility knife w/ blade & hook blade -Speed Square Little Cottage Co. PO Box 455 Berlin, OH
More informationAdvance Concrete. Tutorial
Advance Concrete Tutorial Table of contents About this tutorial... 9 How to use this guide... 10 Lesson 1: Creating a building grid... 11 Step 1: Create a default building grid... 11 Step 2: Set the distances
More informationRevit Structure 2014 Basics
Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More informationThis document describes the new features of MTpro version as compared to MTpro
New features in MTpro 3.6 This document describes the new features of MTpro version 3.6.0.0 as compared to MTpro 3.5.0.0. Table of contents 1 General... 2 2 New contents... 3 2.1 New CAD models... 3 2.2
More informationAutodesk Inventor Drawing Manager Tips & Tricks
Alessandro Gasso Autodesk, Inc. MA1280 This class covers several workflows that answer the most common questions from the Inventor users about the Drawing Manager. You will learn how to add the scale value
More informationOpening the Door to Curtain Walls in AutoCAD Architecture, Part I
Opening the Door to Curtain Walls in AutoCAD Architecture, Part I David Driver, President 4D Architects, Ltd. AB210-3 This class gives you a kit of parts and a set of rules methodology for understanding
More informationPurlin Roof. Create a New Folder in your chosen location called Purlin Roof. The nine parts that make up the project will be saved here.
Purlin Roof Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson. Sketching (Line, Rectangle, Add Relations, Dimensioning), Inserting Planes, Extrude,
More informationLesson 7: Roof Height Change buildings; changing bracing; WideBay Roof Secondary; soldier columns; snow drift.
127 Lesson 7: Roof Height Change buildings; changing bracing; WideBay Roof Secondary; soldier columns; snow drift. Input an Endwall-to Endwall Roof Height Change (Low Building for Office, High Building
More informationVTube-LASER Quick Start Guide
VTube-LASER Quick Start Guide This guide shows how to import a STEP file and then MEASURE and qualify demo tube 4 using the standard UNISCAN method of measuring. The steps in this workflow are from version
More informationEC-CAD New features and changes The following improvements have been made to the EC-CAD Product: EC Design to Fabrication.
RELEASE NOTES EC Design to Fabrication This document contains summary information on new features, late-breaking product information, updates, and troubleshooting tips not covered in the Trimble EC Design
More informationVectorworks Architect
SAMPLE by Jonathan Pickup third edition written with version 2011 Vectorworks Architect Tutorial Manual Table of Contents Introduction... iii How to Use this Manual... iii New Ways of Drawing... iv Vectorworks
More informationEstimaXpro. S&R Consultants
EstimaXpro S&R Consultants Contents 1. Introduction... 5 2. Masters... 7 2.1 Project Details... 7 2.2 Storey Details... 8 2.3 Joinery Details... 8 2.4 Rate types... 9 2.5 Rates... 9 2.6 Rate Analysis Type...
More informationEnd of Row Doors. Revision Number 1
End of Row Doors Single Swing Door Café Style Doors Revision Number 1 Wright Line LLC 160 Gold Star Boulevard Worcester, MA 01606 Tel: 800-225-7348 508-852-4300 Fax: 508-365-6178 www.wrightline.com info@wrightline.com
More informationUnit 9. Wall and Ceiling Framing
Unit 9 Wall and Ceiling Framing Wall construction Wall framing includes the assembly of horizontal and vertical members that make up exterior walls and interior partitions. Theses walls support the ceilings
More informationCAD Tutorial. CAD Detail Windows. In this tutorial you ll learn about: CAD Detail Windows Exploding and Modifying a CAD Block
CAD Tutorial In this tutorial you ll learn about: CAD Detail Windows Exploding and Modifying a CAD Block Creating a New CAD Block CAD Detail from View Creating a Plot Plan CAD Detail Windows CAD Details
More informationLD20558-L Parking Lots with AutoCAD Civil 3D Corridors
LD20558-L Parking Lots with AutoCAD Civil 3D Corridors Steven Hill CAD Manager, Civil Designer / Geosyntec Consultants.NET Application Developer / Red Transit Consultants, LLC Learning Objectives Discover
More informationBIM. e Submission Guideline Structural. Annex 1a. Recommended Process Revit 2010
BIM e Submission Guideline Structural Annex 1a Recommended Process Revit 2010 Building and Construction Authority 5 Maxwell Road #16-00 Tower Block MND Complex Singapore 069110 www.bca.gov.sg Revision
More informationCONTINUED. TABLE TOPS: 1. Sort one 2x6x8 piece from your lumber. 2. Measure and mark two 48 pieces from each, then cut.
# Materials: Quantity Each: Total Quantity: x4x8 7 x6x8 1 TIPS FOR SUCCESSFUL PREP WORK: Before starting, carefully read through the entire instruction sheet. Refer to the material list to the left and
More informationIntroduction to ANSYS DesignModeler
Lecture 4 Planes and Sketches 14. 5 Release Introduction to ANSYS DesignModeler 2012 ANSYS, Inc. November 20, 2012 1 Release 14.5 Preprocessing Workflow Geometry Creation OR Geometry Import Geometry Operations
More informationVersatility at Work. Installation Instructions
Versatility at Work Installation Instructions Important Things to know Use the screws, provided in each box, to attach Eliminator Track TM to the ceiling grid Understand the Basic Cut. You will use this
More informationn 4ce Professional Module
n 4ce Fact Sheet n 4ce Professional Module For the discerning user with specialist needs, n 4ce Professional provides extra facilities in Design and 3D presentations. Using the same platform as Lite, extra
More informationMAT106: Wall Framing. AMERICAN FOREST & PAPER ASSOCIATION American Wood Council Engineered and Traditional Wood Products
MAT106: This portion of the program will address the code requirements for wall framing, although we won t address bracing in this section. The program contains a separate bracing section. 1 FASTEN PLATES
More information1. Tile Roof Installation:!
1. Tile Roof Installation:! * Solar Roof Fan have a different base plate and ventilation opening size. This will require different measurements and allowances to those shown as pictures. Materials Needed:
More informationPrecut Workshop & Gable Manual
Tools Needed: -Cordless Drill (12V or higher) -#2 Square Drive Bit -Hammer -6 Step Ladder -Tape Measure -Square utility knife w/ blade & hook blade -Speed Square Little Cottage Co. PO Box 455 Berlin, OH
More informationSections & Details VOCABULARY
1 Sections & Details VOCABULARY 1 ROOF FRAMING DETAIL RIDGE BOARD SHEATHING SHINGLES WEB FASCIA RAFTER (chord) SOFFIT SHEATHING STUD INSULATION DOUBLE TOP PLATE CEILING JOIST 2 FOUNDATION DETAIL STUD SHEATHING
More informationLevels. Chapter Nine PLAY VIDEO INTRODUCTION LEVEL MANAGER AND LEVEL DISPLAY DIALOGS LEVEL MANAGER DIALOG
Chapter Nine Levels PLAY VIDEO INTRODUCTION A design file consists of any number of levels. A level is a way of separating CAD data much the same way as a clear sheet of acetate is used by an architect
More informationBIM - ARCHITECTUAL IMPORTING A SCANNED PLAN
BIM - ARCHITECTUAL IMPORTING A SCANNED PLAN INTRODUCTION In this section, we will demonstrate importing a plan created in another application. One of the most common starting points for a project is from
More informationGstarCAD Mechanical 2015 Help
1 Chapter 1 GstarCAD Mechanical 2015 Introduction Abstract GstarCAD Mechanical 2015 drafting/design software, covers all fields of mechanical design. It supplies the latest standard parts library, symbols
More informationAutodesk Revit MEP 2014
ISI ACADEMY Autodesk Revit MEP 2014 Getting Started Starting Revit Starting Revit for the First Time Opening a Project File Identifying the User Interface Components Managing User Interface Components
More informationGambrel Barn Construction Manual 8x8 through 16x24 Units
Gambrel Barn Construction Manual 8x8 through 16x24 Units Tools Needed: Cordless drill (12V or higher) #2 square drive bit Hammer 6 step ladder Tape measure Square utility knife w/ blade & hook blade Little
More informationAdvance Steel Essentials
Advance Steel Essentials Course Length: 3 days This course is intended to give an overview of all of the basic commands that are required to create structures and associated documentation using the Autodesk
More informationStar Barn Manual. Tools Needed:
Tools Needed: -Cordless Drill (12V or higher) -#2 Square Drive Bit -Hammer -6 Step Ladder -Tape Measure -Square utility knife w/ blade & hook blade -Speed Square Little Cottage Co. PO Box 455 Berlin, OH
More informationLesson 4 Holes and Rounds
Lesson 4 Holes and Rounds 111 Figure 4.1 Breaker OBJECTIVES Sketch arcs in sections Create a straight hole through a part Complete a Sketched hole Understand the Hole Tool Use Info to extract information
More informationGambrel Barn with Overhang Manual
Tools Needed: -Cordless Drill (12V or higher) -#2 Square Drive Bit -Hammer -6 Step Ladder -Tape Measure -Square utility knife w/ blade & hook blade -Speed Square Little Cottage Co. PO Box 455 Berlin, OH
More informationChapter 23. Garage Construction
Chapter 23. Garage Construction 23.1 ESTABLISHING CHALK LINES 23.2 MEASURING AND CUTTING WALL PLATES 23.3 MARKING WINDOW & DOOR LOCATIONS ON EXTERIOR WALL PLATES 23.4 MARKING STUDS ON EXTERIOR WALL PLATES
More informationSTRUCTURAL BRACKETS CATALOGUE
08/2011 STRUCTURAL BRACKETS CATALOGUE SUPERIOR QUALITY, HOT DIP GALVANISED, HEAVY DUTY BRACKETS FOR FIXING TIMBER TO TIMBER, TIMBER TO CONCRETE, TIMBER TO STEEL The BOWMAC product range is designed to
More informationTekla Structures Release Notes. Product version 21.0 March Tekla Corporation
Tekla Structures Release Notes Product version 21.0 March 2015 2015 Tekla Corporation Conte 1 Tekla Structures 21.0 Release Notes...5 1.1 Setting up your project... 6 1.2 Tekla Model Sharing...7 1.3 Tekla
More informationSAMPLE INSTRUCTIONS. Best Barns USA Assembly Book. the North Dakota with pocket doors. Building Size 12'x12' or 12'x16' Revised August 30, 2011
Best Barns USA Assembly Book Revised August 30, 2011 SAMPLE INSTRUCTIONS the North Dakota with pocket doors Building Size 12'x12' or 12'x16' Manufactured by Reynolds Building Systems, Inc. 205 Arlington
More information24 X32 3 CAR GARAGE POLE BARN STYLE FRAME
24 X32 3 CAR GARAGE POLE BARN STYLE FRAME 3 ENTRY DOOR 2 WINDOWS, 1 @ EA. END 1-16 X8 GARAGE DOOR 1-9 X8 GARAGE DOOR 4 CONCRETE SLAB 10 WALLS 4/12 PITCH METAL ROOF METAL SIDING INDEX PAGE DESCRIPTION 1
More informationDrawing output in imos ix 2017 SR2. Date of creation: March 2018; last changes Version used: ix 2017 SR2
Drawing output in imos ix 2017 SR2 Date of creation: March 2018; last changes 13.04.2018 Version used: ix 2017 SR2 We make every effort to ensure the content of this document is complete, accurate and
More informationSAMPLE INSTRUCTIONS. Best Barns USA Assembly Book. the Belmont with pocket doors. Building Size 12'x16' or 12'x20' Revised January 10, 2012
Best Barns USA Assembly Book Revised January 10, 2012 SAMPLE INSTRUCTIONS the Belmont with pocket doors Building Size 12'x16' or 12'x20' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive
More informationDimensioning: There are a few simple best practices which can help us dimension a working drawing:
Dimensioning and Tolerancing Prepared by: Michael Hypes Cornell University Preparation: One of the most common problems for new designers is choosing dimension that do not reflect the purpose of the part.
More informationMRI Grid. The MRI Grid is a tool in MRI Cell Image Analyzer, that can be used to associate measurements with labeled positions on a board.
Abstract The is a tool in MRI Cell Image Analyzer, that can be used to associate measurements with labeled positions on a board. Illustration 2: A grid on a binary image. Illustration 1: The interface
More informationChapter Tests and Problems
Chapter Tests and Problems Chapter 9 Auxiliary Views Test INSTRUCTIONS Answer the questions with short, complete statements or drawings as needed. QUESTIONS 1. Describe the purpose of auxiliary views.
More informationSheet Metal OverviewChapter1:
Sheet Metal OverviewChapter1: Chapter 1 This chapter describes the terminology, design methods, and fundamental tools used in the design of sheet metal parts. Building upon these foundational elements
More informationCOMPUTER AIDED DRAFTING LAB (333) SMESTER 4
COMPUTER AIDED DRAFTING LAB (333) SMESTER 4 Introduction to Computer Aided Drafting: The method of preparing engineering drawing by using the computer software is known as Computer Aided Drafting (CAD).
More informationModeling Basic Mechanical Components #1 Tie-Wrap Clip
Modeling Basic Mechanical Components #1 Tie-Wrap Clip This tutorial is about modeling simple and basic mechanical components with 3D Mechanical CAD programs, specifically one called Alibre Xpress, a freely
More informationAdobe Illustrator s Pathfinder Panel
GRAF 3015 Adobe Illustrator s Pathfinder Panel Instructor: Bill Bowman Bill Bowman 2012 Continued The Pathfinder Panel... Combining and splitting paths in Illustrator is managed by the ten tools found
More informationVertical Offset Base and Safety Rail System Installation Instructions
Section 5 Vertical Offset Base and Safety Rail System Installation Instructions The vertical offset base and safety rail assembly are designed to be used in residential construction for sloped or flat
More informationRoof Tutorial Wall Specification
Roof Tutorial The majority of Roof Tutorial describes some common roof styles that can be created using settings in the Wall Specification dialog and can be completed independent of the other tutorials.
More informationFrequently asked questions about tool paths.
Frequently asked questions about tool paths. What is the difference between a Male, Female, and Online tool path? Tool paths come in three varieties male, female, and online. The difference has to do with
More informationThe Rest of the Story: Using Autodesk Inventor Tools to Complete Facilities Design Documentation and Design
The Rest of the Story: Using Autodesk Inventor Tools to Complete Facilities Design Documentation and Design Instructor: Mike Jolicoeur Autodesk Lab Assistants: Sachlene Singh Autodesk Steve Schuchard PMC
More informationAnnex IV - Stencyl Tutorial
Annex IV - Stencyl Tutorial This short, hands-on tutorial will walk you through the steps needed to create a simple platformer using premade content, so that you can become familiar with the main parts
More information036-ShopDrawings hsbinoutput/shop Drawings
1 FUNCTION The function of this document is to provide information on how to use the shop drawings (hsbinoutput\shop drawings) in hsb2009+. In hsbcad you have Element drawings that can be generated automatically
More informationCreo Parametric 4.0 Basic Design
Creo Parametric 4.0 Basic Design Contents Table of Contents Introduction...1 Objective of This Textbook...1 Textbook Outline...2 Textbook Conventions...3 Exercise Files...3 System Configuration...4 Notes
More informationRevit Architecture Student Workbook
Revit Architecture Student Workbook Building Information Modeling with Revit Architecture Contents Introduction... 5 Unit 1... 9 Theory: CAD Versus BIM... 9 Revit Architecture: Introduction, Interface,
More informationThere are two types of cove light in terms of light distribution inside a room
DIALux evo Tutorials Tutorial 2 How to create a cove light detail In this tutorial you will learn the following commands. 1. Using help lines 2. Using ceiling. 3. Using cutout 4. Using Boolean operation
More information