WOOD FRAMING ROOF+ FEATURES
|
|
- Brett Harvey
- 5 years ago
- Views:
Transcription
1 WOOD FRAMING ROOF+ FEATURES
2 Load Families & Schedules Load Families & Schedules loads sample framing, connection families and sample schedules to the current project. You can find the families in Project Browser Families under Structural Connections and Structural Framing categories. Sample schedules can be found under Schedules/Quantities in Project Browser. Note: User can modify these schedules and use them as a templates for shop drawings. 2
3 Framing Configuration Framing Configuration here user can define all framing parameters. It allows user to configure and save settings for all sorts of frames main roof Frames, Secondary Frames, Battens and Roofing. It is very versatile with thousands of different possibilities. 3
4 Roof Link Roof Link makes a link between roof type from the project and configuration. Choose the roof type you want to link and apply framing configuration for the layers. 4
5 Frame Roof Frame Roof frames selected roof from the model according to predefined configuration. 5
6 Update Frame Update Frame updates the frame if there are any changes made to roof, e.g. skylight was moved, or roof extended. 6
7 Add Secondary Frame Add Secondary Frame adds secondary frame to selected roofs. 7
8 Add Battens Add Battens adds battens to selected roofs. 8
9 Add Roofing Add Roofing adds vertical, horizontal roofing to selected roofs. 9
10 Frame Additional Layers Frame Additional Layers automatically frames all other layers (battens, roofing, secondary frame) excluding the main Frame. You will not need to press Add Battens or Add Roofing separately. The layers, which should be framed, need to be selected in Frame column in Roof Link: 10
11 Add/Update/Delete Details Add Details for placing details at the end of framing process. Recommended workflow: create frame without details; add additional elements; split elements if needed; and in the final step - add details. This will allow users to save time during updating process when you frame a roof. 11
12 Add/Update/Delete Details User can predefine the details in Framing Configuration, but the details will not be added if Use Add Details command will be ticked during the framing process: 12
13 Add Bracing between two Joists Add Bracing between two Joists: External or Internal Side adds bracing between two selected joists, you can choose to add it to external or internal side of framing. To configure settings go to Framing Configuration select configuration you use in the roof Bracing. You can add wood or metal bracings. 13
14 Add Bracing between two Joists 2 Select joists to show bracing ends 1 14
15 Add Additional Bridging/Nogging/Blocking 1 2 Select two joists predefine offset, number of elements, etc. Add Additional Bridging/Nogging/Blocking adds additional bridging/nogging/blocking between selected joists. 15
16 Add Additional Bridging/Nogging/Blocking For the bridgings you have to use I_Roof_Frame Horizontal Board or M_Roof_Frame Horizontal Board family. Also there is a possibility to put two (or more) rows on the External, Internal or Central side of the Frame. 16
17 Add Additional Joist Add Additional Joist adds additional joist from selected joist or roof ends. Select a joist predefine the offset from the joist or roof ends 17
18 Add Additional Support Joist Select two rims predefine the offset and a spacing between joists Add Additional Support Joist adds additional support joist between two selected rims 18
19 Modify Additional Element Modify Additional Element modifies selected additional element with custom settings if you need to do unique changes. All configuration settings are the same as in Framing Configuration. 19
20 Add/Delete Additional Details Add Additional Details adds additional details by predefined rules Details could be added on the joist or rim. 20
21 Split Rim Joists Automatically Split Rim Joists Automatically splits rim joists according to predefined settings in Framing Configuration 21
22 Split Rim Joists Automatically Split settings come from here: 22
23 Split Rim Joist Manually Split Rim Joist Manually splits rim joist by selected joist. 2 1 Make sure Auto Split Lengthen Distance setting in Framing Configuration is 0. 23
24 Split Bridging/Nogging Split Bridging/Nogging splits bridging or nogging by selected joist
25 Multi-Framing Multi-Framing features work well in big projects, like multi-story houses. It opens additional window that contains tools for multi-framing tasks. Multi-Framing is used when there are groups or identical roofs in the project. Using Multi-Framing tools user can easily transfer framing elements between identical roofs and update them automatically. Read more in a separate Roof+ Multi-Framing.pdf document. 25
26 Delete Frame Delete Frame deletes selected framing. You just need to select one frame and the tool will delete the whole frame from the roof. 26
27 Align Joists with Selected Joist Align Joists with Selected Joist use if joists from other layer, like secondary frame, have to be aligned with joists from main frame. 27
28 Align Joists with other Element Align Joists with other Element aligns joists with trusses, truss system grids or joists from other panels. 28
29 Align Joists with other Element Steps: 1. Run Align Joists with other Element Select any Structural Framing element Select a joist from the frame that has to be aligned 29
30 Align Joists with other Element Result all joists from two separate panels are aligned: 30
31 Align Joists with two other Elements Align Joists with two other Elements aligns joists with two selected trusses, truss system grids or joists from other frames 31
32 Align Joists with two other Elements Steps: 1. Run Align Joists with two other Elements select two Structural Framing elements Select a joist that has to be aligned: 2 32
33 Align Joists with two other Elements Result all joists from the frame are aligned 33
34 Align Opening Cripples with Joists Align Opening Cripples with Joists aligns opening cripples with joists from same or other frames. 34
35 Align Opening Cripples with Joists Steps: 1. Run Align Opening Cripples with Joists 2. Select any cripple above the opening Result all cripples above the opening are aligned 35
36 Clear Opening Cripples Alignment with Joists Clear Opening Cripples Alignment with Joists removes alignment of cripples to default. 36
37 Align Bridging/Nogging/Blocking Align Bridging/Nogging/Blocking aligns selected bridgings, noggings or blockings from two separate roof panels
38 Cut Beams with Solid Cut Beams with Solid cut selected beam which intersects with other beams. 38
39 Uncut Beams Uncut Beams uncuts selected beam which intersects with other beams. 39
40 Modify Roof Framing Modify Roof Framing modifies selected roof framing with custom settings if you need to do unique changes. All configuration settings are the same as in Framing Configuration 40
41 Modify Opening Framing Modify Opening Framing modifies selected opening framing with custom settings if you need to do unique changes. All configuration settings are the same as in Framing Configuration. 41
42 Modify Edge Joists Modify Edge Joists modifies selected join with custom settings if you need to do unique changes. All configuration settings are the same as in Framing Configuration. 42
43 Update by Roof Link Update by Roof Link reframes frame or selected opening to the default that is configured under Framing Configuration. 43
44 Save Configuration of Selected Frame Save Configuration of Selected Frame saves configuration of selected frame without settings for openings. This feature is very useful if you have already framed roof and you lost configuration that was used for this roof. Configuration is needed to frame new roofs. 44
45 Save Configuration of Selected Frame You just need to select any frame from a roof and save configuration under your name: Now you will be able to use this configuration for new or existing roofs: 45
46 Configure Rafters Configure Rafters predefine default families and types for the hips, valley rafters and ridges. 46
47 Delete Hip/Valley Rafters Delete Hip/Valley Rafters deletes hip and valley rafters from the selected roof. 47
48 Insert Hip/Valley Rafters Insert Hip/Valley Rafters inserts hip or valley rafters to the selected roof. The family and type comes from Configure Rafters. 48
49 Insert Ridge Insert Ridge inserts ridges to the selected roof. The family and type comes from Configure Rafters. 49
50 Delete Ridge Delete Ridge deletes selected ridge. 50
51 Delete All Ridges Delete Ridge deletes all ridges from the selected roof. 51
52 ENJOY WORKING WITH OUR PRODUCTS! AGA CAD Ltd T: E: W:
WOOD FRAMING WALL+ FEATURES
WOOD FRAMING WALL+ FEATURES Load Families &Schedules Load Families & Schedules loads sample framing, connection families and sample schedules to the current project. You can find the families in Project
More informationWOOD FRAMING FLOOR+ FEATURES
WOOD FRAMING FLOOR+ FEATURES Load Families &Schedules Load Families & Schedules loads sample framing, connection families and sample schedules to the current project. You can find the families in Project
More informationMETAL FRAMING WALL+ FEATURES
METAL FRAMING WALL+ FEATURES Load Families &Schedules Load Families & Schedules loads sample schedules, sample framing and connection families to the current project. You can find the families in Project
More informationWOOD FRAMING ROOF+ FRAMING CONFIGURATION
WOOD FRAMING ROOF+ FRAMING CONFIGURATION Framing Configuration Framing Configuration here user can define all framing parameters. It allows user to configure and save settings for all sorts of frames main
More informationMETAL FRAMING ROOF+ FRAMING CONFIGURATION
METAL FRAMING ROOF+ FRAMING CONFIGURATION Framing Configuration Framing Configuration here user can define all framing parameters. It allows user to configure and save settings for all sorts of frames
More informationMETAL FRAMING FLOOR+ FRAMING CONFIGURATION
METAL FRAMING FLOOR+ FRAMING CONFIGURATION Framing Configuration Framing Configuration here user can define all framing parameters. It allows user to configure and save settings for all sorts of frames
More informationMETAL FRAMING RAFTER+ Split Beam Systems
METAL FRAMING RAFTER+ Split Beam Systems Split Beam System Revit doesn t have any possibility to control a distance of the first and last rafter spacing of Beam System. It is the main reason to use the
More informationMETAL FRAMING WALL+ FRAMING CONFIGURATION
METAL FRAMING WALL+ FRAMING CONFIGURATION Framing Configuration Framing Configuration definition of all framing parameters. It allows to configure and save settings for all sorts of frames main wall Frames
More informationMETAL FRAMING Wall+ SHOP DRAWINGS
METAL FRAMING Wall+ SHOP DRAWINGS Shop Drawings Finish your modeling with built-in shop drawing generator and deliver your wall framing estimation the same hour. Build your complete shop drawings with
More informationWOOD FRAMING ROOF+ SHEATHING and PANELING LAYOUTS
WOOD FRAMING ROOF+ SHEATHING and PANELING LAYOUTS Sheathing and Paneling Layouts Wood Framing Roof+ automates sheathing and paneling layout creation. Sheathing or paneling layouts can be easily generated
More informationWOOD FRAMING WALL+ SHEATHING and PANELING LAYOUTS
WOOD FRAMING WALL+ SHEATHING and PANELING LAYOUTS Sheathing and Paneling Layouts Wood Framing Wall+ automates sheathing and paneling layout creation. Sheathing or paneling layouts can be easily generated
More informationSMART ASSEMBLIES Dimensioning Rules
SMART ASSEMBLIES Dimensioning Rules EDIT DIMENSIONING RULES Main Element Geometry 1 4 3 1 possible dimensioning options area and notes about current operation 2 preview of selected options effects 3 preview
More informationMWF Rafters. User Guide
MWF Rafters User Guide September 18 th, 2018 2 Table of contents 1. Introduction... 3 1.1 Things You Should Know Before Starting... 3 1.1.1 Roof Panels Structure Orientation... 3 1.1.2 Member Selection...
More informationChief Architect New Feature List
SYSTEM / PERFORMANCE Chief Architect Premier X4 is available in 64 bit and 32 bit versions. The 64 bit version is more efficient in managing memory and you will see better performance on larger plan files
More informationRevit Structure 2012 Basics:
SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural
More informationRevit Structure 2013 Basics
Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial
More informationFastener Schedule. a, b, c. FASTENER Roof 3-8d (2 1 / ) / ) 3-10d. 3-10d ( ) 3-16d box nails. (3 1 2 toe nails on one side
ITEM 1 DESCRIPTION OF BUILDING ELEMENTS Blocking between joists or rafters to top plate, toe 2 Ceiling joists to plate, toe 3 4 5 6 Ceiling joists not attached to parallel rafter, laps over partitions,
More information2x6. 2x8. 2x10. Size. 2-2x10 8'-5" w/ 2 NJ 7'-3" w/ 2 NJ
1 Rafter Size Spacing Allowable span 24" 11'-9" 24" 2x6 14'-1" 2x4 12" 15'-6" 12" 24" 14'-10" 24" 2x8 18'-2" 2x6 12" 20'-5" 12" 24" 18'-2" 24" 2x10 22'-3" 2x8 12" 25'-8" 12" 24" 21'-0" 24" 2x12 25'-9"
More informationGetting Started with Revit
AUTODESK Autodesk REVIT Revit TRAINING Training TUTORIAL Tutorial Getting Started with Revit FOCUS Focus KUWAIT Kuwait CAD Cad Team 2012-13 Step 01 02 Grid & levels Grid create 5 vertical grid lines grid
More informationRevit Structure 2014 Basics
Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More informationRoof Tutorial Wall Specification
Roof Tutorial The majority of Roof Tutorial describes some common roof styles that can be created using settings in the Wall Specification dialog and can be completed independent of the other tutorials.
More informationLesson 17. The Focus of this lesson is:
The Focus of this lesson is: Inserting beams between frames to support Roof Top Units or concentrated loads Loading the roof beams so they design Locating a roof framed opening Lesson Comments: This lesson
More informationAdvance Steel. Tutorial
Advance Steel Tutorial Table of contents About this tutorial... 7 How to use this guide...9 Lesson 1: Creating a building grid...10 Step 1: Creating an axis group in the X direction...10 Step 2: Creating
More informationOF LEVELS & ADJUSTMENTS TO THE GRID. Bldg: Levels. PROF. PAUL C. KING RA New York City College of Technology. Learning Community.
Bldg: Levels DEVELOPMENT OF LEVELS & ADJUSTMENTS TO THE GRID Overview: The existing drawing includes 2 levels set 10' apart. For the Lab Building we need to createe a total of 6 levels with a vertical
More informationCONTENTS CHAPTER 1 WHAT THIS IS ALL ABOUT...
CONTENTS CHAPTER 1 WHAT THIS IS ALL ABOUT... 17 INTRODUCTION... 17 Terminology... 18 MACINTOSH AND WINDOWS... 20 CONVENTIONS USED IN THIS TUTORIAL... 21 Command Menu Title And Pull-Down Menu... 22 Commands,
More information3. Are component and cladding design pressures consistent with ASCE 7 for the wind speed and exposure category (ASCE 7 Fig. 6-3)?
Mobile County Public Works Residential Plan Reviewers Checklist For Structural Requirements of Wood Framed Residences Recommendation: Permit as Noted Revise Plans and Resubmit MCPW Ref. No. Design Criteria:
More informationVertical Offset Base and Safety Rail System Installation Instructions
Section 5 Vertical Offset Base and Safety Rail System Installation Instructions The vertical offset base and safety rail assembly are designed to be used in residential construction for sloped or flat
More informationThinking Irregularly. Timber Framers Guild Eastern Conference Roanoke, Virginia November 9, 2006
Thinking Irregularly Timber Framers Guild Eastern Conference Roanoke, Virginia November 9, 2006 Basic information Main Roof slope is 9 : 12 Adjacent Roof slope is 10-1/2 : 12 Run of main roof is 12 The
More informationAssignment 13 CAD Mechanical Part 2
Assignment 13 CAD Mechanical Part 2 Objectives In this assignment you will learn to apply the hatch and break commands along with commands previously learned. General Instructions Hatching 1. When AutoCAD's
More informationStep-by-Step Guide Query Studio Grouping, Sorting, Sectioning, Filtering and Calculations. Grouping
There are several ways that data contained in reports run using Query Studio can be formatted. Data can be auto-summarized by grouping the data based on specific criteria, data can be sorted in ascending
More informationModeling 2. Draw Storefront Curtain Wall. Align. Draw Storefront Curtain Wall
STEP 1: Back to your Revit fi le _ from the Project Browser double-click on Level 1 _ type shortcut WA (wall) _ set the type of wall to Storefront _ draw a curtain wall on the South Wall as shown in image
More informationHIP AND GABLE ROOF COMPONENTS
Page 18. VU20976 Roof Framing HIP AND GABLE ROOF COMPONENTS Plan view of the hip and gable roof that you are going to build. Again, don't be tempted just to look the names, put in a bit more effort to
More informationLesson 7: Roof Height Change buildings; changing bracing; WideBay Roof Secondary; soldier columns; snow drift.
127 Lesson 7: Roof Height Change buildings; changing bracing; WideBay Roof Secondary; soldier columns; snow drift. Input an Endwall-to Endwall Roof Height Change (Low Building for Office, High Building
More informationRoof Magician. Advanced Software for Roof Modeling and Estimating. Tutorial for defining Tiles, Shingles and Shakes
Roof Magician Advanced Software for Roof Modeling and Estimating Tutorial for defining Tiles, Shingles and Shakes Document Issue 1.0.0-28 th September 1999 Table of Contents TABLE OF CONTENTS... 2 INTRODUCTION...
More informationDraw IT 2016 for AutoCAD
Draw IT 2016 for AutoCAD Tutorial for System Scaffolding Version: 16.0 Copyright Computer and Design Services Ltd GLOBAL CONSTRUCTION SOFTWARE AND SERVICES Contents Introduction... 1 Getting Started...
More informationGLOSSARY. A useful collection of definitions for commonly used terms in tile roofing.
A useful collection of definitions for commonly used terms in tile roofing. Abutment Where the roof tiles meet a structure rising above the roof. Accessory A concrete or terracotta product used to finish
More informationInstallation Manual. Future Roof Shingle / Slate Products
Installation Manual Future Roof Shingle / Slate Products REVISED 14/09/2010 Future Roof Shingle Installation Manual is a component of Future Roof, Inc. and as such is intended to be used with Future Roof
More informationExterior Wall Fastener Schedule
City of Republic Community Development Department Exterior Wall Fastener Schedule REVISION DATE: JANUARY 2017 Design and construction (2012 IRC Section R602.3): Exterior walls of wood frame construction
More informationCity of Long Beach Department of Development Services Building and Safety Bureau. Wood Frame Prescriptive Provisions For Residential Construction
City of Long Beach Department of Development Services Building and Safety Bureau Wood Frame Prescriptive Provisions For Residential Construction Information Bulletin BU-010 Eff: 01-01-2011 Rev: 07-05-2017
More informationThe Rest of the Story: Using Autodesk Inventor Tools to Complete Facilities Design Documentation and Design
The Rest of the Story: Using Autodesk Inventor Tools to Complete Facilities Design Documentation and Design Instructor: Mike Jolicoeur Autodesk Lab Assistants: Sachlene Singh Autodesk Steve Schuchard PMC
More informationCarpentry/Carpenter CIP Task Grid
1 Secondary Task List 100 SAFETY/OCCUPATIONAL ORIENTATION 101 Identify and follow all basic safety practices and procedures. 102 Identify and follow all lab safety practices and procedures. 103 Identify
More informationSections & Details VOCABULARY
1 Sections & Details VOCABULARY 1 ROOF FRAMING DETAIL RIDGE BOARD SHEATHING SHINGLES WEB FASCIA RAFTER (chord) SOFFIT SHEATHING STUD INSULATION DOUBLE TOP PLATE CEILING JOIST 2 FOUNDATION DETAIL STUD SHEATHING
More information1. Tile Roof Installation:!
1. Tile Roof Installation:! * Solar Roof Fan have a different base plate and ventilation opening size. This will require different measurements and allowances to those shown as pictures. Materials Needed:
More informationAuto-drafting Module for midas Gen MIDAS Information Technology Co., Ltd.
MIDAS Information Technology Co., Ltd. 01 Introduction midas DShop empowers engineers to streamline the design process all the way to generating engineering drawings. midas DShop imports models complete
More informationFraming Tech 1
Western Technical College 31410366 Framing Tech 1 Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 3.00 Total Hours 108.00 This course introduces the
More informationWorking with Detail Components and Managing DetailsChapter1:
Chapter 1 Working with Detail Components and Managing DetailsChapter1: In this chapter, you learn how to use a combination of sketch lines, imported CAD drawings, and predrawn 2D details to create 2D detail
More informationLesson 5 Pre-defined Shape with Lean-to with Framed Openings and common wall as an Opening Objectives:
VP University s BIG Book of VP Command Lessons 75 Lesson 5 Pre-defined Shape with Lean-to with Framed Openings and common wall as an Opening Objectives: Using the VPC Building Editor input a pre-defined
More informationVariety of material thicknesses
Secondary Framing 1 Secondary Framing Materials 2 Secondary Framing Variety of material thicknesses Thickness range from 17 gage to 11 gage Acrylic-coated coated galvanized secondary ( VP Tech Perspective#38)
More informationRecommended Slating Tools
Recommended Slating Tools Product Size L Sketch of Article No. Description 60-070 Scriber 60-00 Slater s Hammer 60-00 Slater Ripper 60-080 Parallel Shears 60-0 Slate Cutter Kwiksnip Slate Guuillotine Slate
More informationWood Roof Framing Common Design and Construction Defects Concurrent Session #5.3, Friday April 28, 2017, 9:45 AM-10:30 AM
Wood Roof Framing Common Design and Construction Defects Concurrent Session #5.3, Friday April 28, 2017, 9:45 AM-10:30 AM William J. Dery, PE Sr. Structural Engineer Outline 1. Wood Roof Framing 101 the
More informationAutoCAD Civil 3D 2009 ESSENTIALS
AutoCAD Civil 3D 2009 ESSENTIALS SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. Alignments and Profiles Section 2: Profiles In this section you learn how
More informationSTRUCTURAL WOOD DETAILING IN CAD FORMAT
STRUCTURAL WOOD DETAILING IN CAD FORMAT STRUCTURAL WOOD DETAILING IN CAD FORMAT K.A. ZAVAT lnm51springer Science+Business ~---Media, LLC Copyright 1993 by Springer Science+Business Media New York Originally
More informationAutodesk Revit Architecture 2014
ISI ACADEMY Autodesk Revit Architecture 2014 Getting Started Starting Revit Starting Revit for the First Time Opening a Project File Identifying the User Interface Managing User Interface Understanding
More information036-ShopDrawings hsbinoutput/shop Drawings
1 FUNCTION The function of this document is to provide information on how to use the shop drawings (hsbinoutput\shop drawings) in hsb2009+. In hsbcad you have Element drawings that can be generated automatically
More informationAutodesk Inventor Module 17 Angles
Inventor Self-paced ecourse Autodesk Inventor Module 17 Angles Learning Outcomes When you have completed this module, you will be able to: 1 Describe drawing inclined lines, aligned and angular dimensions,
More informationDrawing a Living Room and Family Room Floorplan
Appendix C Drawing a Living Room and Family Room Floorplan In this chapter, you will learn the following to World Class standards: Draw a Living Room and Family Room Floorplan Draw the Walls and Stairs
More informationAdvance Steel Essentials
Advance Steel Essentials Course Length: 3 days This course is intended to give an overview of all of the basic commands that are required to create structures and associated documentation using the Autodesk
More informationAssignment 6 CAD Mechanical Part 1 Editing Tools Objectives
Assignment 6 CAD Mechanical Part 1 Editing Tools Objectives In this assignment you will apply the explode and rectangular array commands, as well as skills learned in earlier assignments. Getting Started
More informationSLATE & SHINGLE INSTALLATION
EAVE EDGE Apply a small strip of roofing paper to the bottom of eave. Eave flashing is attached to substrate with roofing nails every 9". Install underlayment over entire roof. (See Fig. 1) PAGE 1 Bend
More informationTrusted ICC ES PASLODE, Evaluation. report, or as to any. ICC-ES Evaluation
0 ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.orgg Most Widely Accepted and Trusted ESR 3072 Reissued 09/2018 Revised 10/2018 This report is subject to renewal 09/2020.
More information(TOLL FREE); 7am 7pm Pacific Time, Monday-Saturday ASSEMBLY INSTRUCTIONS FOR THE ATTACHED ARCHED PERGOLA KITS WITH WALL MOUNTED ANCHORS
866.332.203 (TOLL FREE); 7am 7pm Pacific Time, Monday-Saturday ASSEMBLY INSTRUCTIONS FOR THE ATTACHED ARCHED PERGOLA KITS WITH WALL MOUNTED ANCHORS Qty. 2 2 Quantity will vary. Quantity will vary. Quantity
More informationArchiCAD Easy Start. Ronald Brailsford. Find and double click on the ArchiCAD Icon on your desktop.
ArchiCAD Easy Start Ronald Brailsford THE CABIN Start to Finish Chapter 1 Welcome to the world of BUILDING INFORMATION MODELING. BIM ArchiCAD was the first software to create the smart intelligent modeling
More informationT-BRACE / I-BRACE DETAIL WITH 2X BRACE ONLY
August 10, 2010 T-BRACE / I-BRACE DETAIL WITH 2X BRACE ONLY ST - T-BRACE 2 R MiTek Industries, Chesterfield, MO Page 1 of 1 Note: T-Bracing / I-Bracing to be used when continuous lateral bracing is impractical.
More informationInstallation Manual. Future Shingle Products
Installation Manual Future Shingle Products TITLE REVISED 7/4/2011 Future Shingle Installation Manual is a component of Future Roof, Inc. and as such is intended to be used with Future Roof products only.
More informationPrecut Workshop & Gable Manual
Tools Needed: -Cordless Drill (12V or higher) -#2 Square Drive Bit -Hammer -6 Step Ladder -Tape Measure -Square utility knife w/ blade & hook blade -Speed Square Little Cottage Co. PO Box 455 Berlin, OH
More informationVP Command Warnings, Unpriced Items, Asterisks, and Other
VP Command Warnings, Unpriced Items, Asterisks, and Other There are various reasons why you may see asterisks (*) on your VP Command Pricing Report and nearly as many possible solutions. The building s
More informationAdvance Steel suite 6.1 / SP2
Advance Steel suite 6.1 / SP2 This document describes only the improvements in Service Pack 2 compared to Service Pack 1. The installation of SP2 includes SP1; please see the previous document for improvements
More informationIntroducing AJSTM INSTALLATION GUIDE USA. 8 th Edition USA
The SIMPLE FRAMING SYSTEMSM INSTALLATION GUIDE USA for Floors This Installation Guide is intended to provide general information for the designer and end-user. For further information, please refer to
More informationThe e-stick Roof Installation Guide
The e-stick Roof Installation Guide for carpenters and builders to correctly install Wesbeam e-stick LVL roof framing products roof battens for sheet roofs, underpurlins and struts. e-batten The veneers
More informationRIDGE-JOIST CONNECTION 12/12 maximum slope
R1 RIDGE-JOIST CONNECTION Beveled bearing stiffener each side (see detail R8) 2 3 8" min. end nailing distance, typical United Steel Products LSTA24 or Simpson Strong-Tie LSTA24 strap with 7-10d x 1 1
More informationAdvance Steel 2010 / SP2
Advance Steel 2010 / SP2 This document describes the improvements in Service Pack 2 for Advance Steel 2010. Advance Steel 2010 SP2 is Windows 7 compliant! BOM/LISTS New sorting option in Drawing index
More informationDrawing a Foundation or Basement Plan
Appendix F Drawing a Foundation or Basement Plan In this chapter, you will learn the following to World Class standards: Draw a Foundation or Basement Plan Draw the Basement Walls Draw the Pilasters on
More informationBritish Columbia Carpenter Apprenticeship Program
British Columbia Carpenter Apprenticeship Program Level 3 Line H Competency H-7 Build Intersecting Roofs 7960003573 Ordering Crown Publications, Queen s Printer PO Box 9452 Stn Prov Govt 563 Superior St.
More informationSTRUCTURAL INSULATED PANEL SYSTEMS STANDARD CONSTRUCTION DETAILS
STRUCTURAL INSULATED PANEL SYSTEMS STANDARD CONSTRUCTION DETAILS General arrangement: GA01 Through section SIPFIT BUILDING SYSTEM STANDARD DETAILS Foundations: F01 details to be added Wall details: W01
More informationmidas DShop Reinforcement Edit Function reflecting Constructability
01 Auto-generation of Structural Drawings 02 Structural drawings such as Framing plans, Sectional elevations, Beam/Column schedules, etc., are generated from the analysis & design results of midas Gen.
More informationInstallation Guide. Please read before installing SIPs Kit. 1 Method Statement for the erection of a SIPS Industries Kit Materials...
30a Renewable Chase Bibra Lake WA 6163 Tel: (08) 9494 2211 Fax: (08) 9494 2202 Email: info@sipsindustries.com.au Web: www.sipsindustries.com.au Installation Guide Please read before installing SIPs Kit.
More informationAutodesk Advance Steel. Drawing Style Manager s guide
Autodesk Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction... 5 Details and Detail Views... 6 Drawing Styles... 6 Drawing Style Manager... 8 Accessing the Drawing Style
More informationHow to make a Wendy house Part One: The Floor and the Frame
How to make a Wendy house Part One: The Floor and the Frame The Wendy House. This wendy house is basically a playhouse with a few feminine touches added. A wendy house can give children hours of enjoyment.
More information3.1 General Provisions
WOOD FRAME CONSTRUCTION MANUAL 107 3.1 General Provisions 3.1.1 Prescriptive Requirements The provisions of this Chapter establish a specific set of resistance requirements for buildings meeting the scope
More informationEditing Your Design Roof Tab
Editing Your Design Roof Tab The Roof tab allows you to edit the design of your roof. In here you can change the ridges, rafters, add roof vents, box gutters, and edit other components of the roof. Rapid
More informationAdvance Steel. Drawing Style Manager s guide
Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction...7 Details and Detail Views...8 Drawing Styles...8 Drawing Style Manager...9 Accessing the Drawing Style Manager...9
More information6x6 Shed Plans and Building Guide
Page 1 Legal 2018 Zac Spade & Christopher D. Brown. All Rights Reserved For information about special discounts available for bulk purchases, sales promotions, fundraising and educational needs, contact
More information1 Exam Prep NRCA Roofing Manual: Steep-Slope Roof Systems 2013 Tabs and Highlights
1 Exam Prep NRCA Roofing Manual: Steep-Slope Roof Systems 2013 Tabs and s These 1 Exam Prep Tabs are based on the National Roofing Contractors Association (NRCA) manual listed below: Steep-Slope Roof Systems
More informationDescription. Lesson Outcomes. Assumptions. Build a Floor. Carpenter
Carpenter Description Floors are an integral part of residential construction and must be built to specifications that meet building code requirements. In this Activity Plan, students will be cutting and
More informationUnit 9. Wall and Ceiling Framing
Unit 9 Wall and Ceiling Framing Wall construction Wall framing includes the assembly of horizontal and vertical members that make up exterior walls and interior partitions. Theses walls support the ceilings
More informationCarry out structural carcassing operations
Reference : K/504/7882 Level : Level 2 Credit Value : 16 Carry out structural carcassing operations Guided Learning Hours : 128 Grading Type : Graded Aim : The aim of this unit is to provide the learner
More informationNumber Object Category Attribute Name Explanation Examples Further comments
1 STORY 2 GRID 3 COLUMN 2 Story Elevation Absolute elevation for story (the name "story" is prefered over "level", as level is used in e.g. Revit Typically, our elevations for a project are all relative
More informationRelease Notes - Fixes in Tekla Structures 2016i SP1
Release Notes - Fixes in Tekla Structures 2016i SP1 is modified., the ID of the connection plate is not changed anymore when the connection now uses normal rebar groups instead of tapered groups., the
More informationPrecast Concrete Industry Extensions for Autodesk Revit Structure 2012 Reinhard Lackner IDAT
Precast Concrete Industry Extensions for Autodesk Revit Structure 2012 Reinhard Lackner IDAT SE4030 This class shows how extensions to Revit Structure can dramatically speed up creation of precast elements.
More informationFASTENERS BUILDING DEPARTMENT
FASTENERS BUILDING DEPARTMENT 952-446-1660 WWW.CITYOFMINNETRISTA.COM This handout is intended only as a guide and is based in part on the 2015 Minnesota Residential Code, Minnetrista City ordinances, and
More informationIndex. Greenwood Timber Framing th Ave NE Redmond, WA (425) On the Web at
Greenwood Timber Framing 7353 148th Ave NE Redmond, WA 98052 (425) 881-3331 info@greenwoodtf.com On the Web at www.greenwoodtf.com Index Part I: Stages of Design 1. Stages of Design 2. Design Paths 3.
More informationSupervisor s Checklist (Handling/Installation/Inspection of Roof Framing)
Supervisor s Checklist (Handling/Installation/Inspection of Roof Framing) Development Regulations 2008 Notice pursuant to Regulation 74 of the Development Act 1993 Development Application Number: Address
More informationIDEA Connections. User guide
IDEA Connections user guide IDEA Connections User guide IDEA Connections user guide Content 1.1 Program requirements... 4 1.1 Installation guidelines... 4 2 User interface... 5 2.1 3D view in the main
More informationRafter Cutting Basics
Rafter Cutting Basics Understanding basic rafter principles is key to efficiently framing even the most complex roofs There are many ways to cut rafters. In more than 25 years of framing houses, I have
More informationSuperFOIL Insulation. Solutions Guide. Pitched Roof - Under Rafter
SuperFOIL Insulation Solutions Guide Pitched Roof - Under Rafter SF19+ Pitched Roof Under Rafter Solutions CONSTRUCTION THICKNESS R -VALUE EXTERNAL SURFACE - 0.040 TILES / SLATES 10mm - BATTEN CAVITY 25mm
More informationESCONDIDO FIRE DEPT TRAINING MANUAL Section Truck Module Page 1 of 9 Ventilation Overview Revised
Truck Module Page 1 of 9 INTRODUCTION Each firefighter must have a thorough knowledge of the proper methods used to ventilate a structure. Ventilation itself does not put out fires! However, effective
More informationAssembly instructions for: ATTACHED PAVILION KIT - BACKYARD ROOF STYLE - WITH METAL PLAQUES
866.332.2403 (Toll Free); 8am-5pm Pacific Time, Monday-Friday Assembly instructions for: ATTACHED PAVILION KIT - BACKYARD ROOF STYLE - WITH METAL PLAQUES CONTENT OF BOXES QUANTITY DESCRIPTION DRAWING 2
More informationConverting a solid to a sheet metal part tutorial
Converting a solid to a sheet metal part tutorial Introduction Sometimes it is easier to start with a solid and convert it to create a sheet metal part. This tutorial will guide you through the process
More informationTABLE OF CONTENTS. INTRODUCTION...5 Advance Steel...5 Where to find information?...6 Contacting technical support...6
TABLE OF CONTENTS INTRODUCTION...5 Advance Steel...5 Where to find information?...6 Contacting technical support...6 INSTALLATION...7 System requirements...7 Starting the installation...7 STARTING ADVANCE
More informationPASS Sample Size Software. These options specify the characteristics of the lines, labels, and tick marks along the X and Y axes.
Chapter 940 Introduction This section describes the options that are available for the appearance of a scatter plot. A set of all these options can be stored as a template file which can be retrieved later.
More information