WOOD FRAMING FLOOR+ FEATURES
|
|
- Anastasia Warren
- 5 years ago
- Views:
Transcription
1 WOOD FRAMING FLOOR+ FEATURES
2 Load Families &Schedules Load Families & Schedules loads sample framing, connection families and sample schedules to the current project. You can find the families in Project Browser Families under Structural Connections and Structural Framing categories. Sample schedules can be found under Schedules/Quantities in Project Browser. Note: User can modify those schedules and use it as a templates for making shop drawings.
3 Framing Configuration Framing Configuration definition of all framing parameters. It allows to configure and save settings for all sorts of frames: main floor Frames, Flooring, Batten beams. It is very versatile with thousands of different possibilities.
4 Floor Link Floor Link makes a link between floor type from the project and configuration. Choose the floor type you want to link and apply framing configuration for the layers.
5 Frame Floor Frame Floor frames selected floors from the model according to predefined configuration. Frame direction deepens on Span Direction in the Floor Boundary:
6 Update Frame Update Frame updates the frame if there are any changes made to the floor, e.g. floor boundary is extended.
7 Add Battens Add Battens adds batten beams to selected floors.
8 Add Flooring Add Flooring adds flooring to selected floors.
9 Add Additional Bridging/Noggin/Blocking Add Additional Bridging/Nogging/Blocking adds additional bridging/nogging/blocking between selected joists. 1 2 Select two joist predefine the offset from floor base or end
10 Add Additional Joist Add Additional Joists adds additional joist to the floor custom place. Select a joist predefine the offset from the selected joist or floor ends
11 Split Rim Joist Split Rim Joist splits rim joist according to selected joist. Select the joist which will split the rim and then the rim: 1 2
12 Manage Floors Manage Floors shows information about floors in a convenient dialog. Every floor is displayed in a separate row and is indicated with a color. On the right side you can see the color legend. The elements selected in the dialog box will be selected and shown in the model as well. Also you can easily filter the floors in the tree on the left.
13 Delete Frame Delete Frame deletes selected framing. You just need to select one frame and the tool will delete the whole floor frame.
14 Align Joists with Selected Joist Align Joists with Selected Joist use if joists have to be aligned after framing a floor. Select a joist and other joists will be aligned to predefined distance.
15 Align Joists with Other Element Align Joists with Other Element aligns joists with trusses, truss system grids or joists from other frames. 2 1 Select other element (for example wall stud) select floor joist
16 Align Joists with Two Other Elements Align Joists with Two Other Elements aligns joists with two selected trusses, truss system grids or joists from other frames Select two Structural Framing elements (for example wall studs) select floor joist
17 Align Opening Cripples with Joists Align Opening Cripples with Joists aligns opening cripples with joists from other frames. Select any cripple all cripples will be aligned with other framing elements.
18 Clear Opening Cripples Alignment with Joists Clear Opening Cripples Alignment with Joists sets alignment of cripples to default.
19 Modify Floor Framing Modify Floor Framing modifies selected floor framing with custom settings if you need to make unique changes. All configuration settings are the same as in Framing Configuration.
20 Modify Edge Joists Modify Edge Joists modifies selected edge joist with custom settings if you need to make unique changes. All configuration settings are the same as in Framing Configuration.
21 Modify Additional Element Modify Additional Element modifies selected additional element with custom settings if you need to make unique changes. All configuration settings are the same as in Framing Configuration.
22 Update Framing by Floor Link Update Framing by Floor Link reframes frame with default settings which is configured under Framing Configuration.
23 Save Configuration of Selected Frame Save Configuration of Selected Frame saves configuration of selected frame. This feature is very useful if you have already framed floor and you lost configuration that was used for this floor. Configuration is needed to frame new floors.
24 AGA CAD Ltd T: E: W:
METAL FRAMING WALL+ FEATURES
METAL FRAMING WALL+ FEATURES Load Families &Schedules Load Families & Schedules loads sample schedules, sample framing and connection families to the current project. You can find the families in Project
More informationWOOD FRAMING ROOF+ FEATURES
WOOD FRAMING ROOF+ FEATURES Load Families & Schedules Load Families & Schedules loads sample framing, connection families and sample schedules to the current project. You can find the families in Project
More informationWOOD FRAMING WALL+ FEATURES
WOOD FRAMING WALL+ FEATURES Load Families &Schedules Load Families & Schedules loads sample framing, connection families and sample schedules to the current project. You can find the families in Project
More informationMETAL FRAMING Wall+ SHOP DRAWINGS
METAL FRAMING Wall+ SHOP DRAWINGS Shop Drawings Finish your modeling with built-in shop drawing generator and deliver your wall framing estimation the same hour. Build your complete shop drawings with
More informationMETAL FRAMING FLOOR+ FRAMING CONFIGURATION
METAL FRAMING FLOOR+ FRAMING CONFIGURATION Framing Configuration Framing Configuration here user can define all framing parameters. It allows user to configure and save settings for all sorts of frames
More informationWOOD FRAMING ROOF+ FRAMING CONFIGURATION
WOOD FRAMING ROOF+ FRAMING CONFIGURATION Framing Configuration Framing Configuration here user can define all framing parameters. It allows user to configure and save settings for all sorts of frames main
More informationMETAL FRAMING ROOF+ FRAMING CONFIGURATION
METAL FRAMING ROOF+ FRAMING CONFIGURATION Framing Configuration Framing Configuration here user can define all framing parameters. It allows user to configure and save settings for all sorts of frames
More informationMETAL FRAMING WALL+ FRAMING CONFIGURATION
METAL FRAMING WALL+ FRAMING CONFIGURATION Framing Configuration Framing Configuration definition of all framing parameters. It allows to configure and save settings for all sorts of frames main wall Frames
More informationWOOD FRAMING ROOF+ SHEATHING and PANELING LAYOUTS
WOOD FRAMING ROOF+ SHEATHING and PANELING LAYOUTS Sheathing and Paneling Layouts Wood Framing Roof+ automates sheathing and paneling layout creation. Sheathing or paneling layouts can be easily generated
More informationMETAL FRAMING RAFTER+ Split Beam Systems
METAL FRAMING RAFTER+ Split Beam Systems Split Beam System Revit doesn t have any possibility to control a distance of the first and last rafter spacing of Beam System. It is the main reason to use the
More informationWOOD FRAMING WALL+ SHEATHING and PANELING LAYOUTS
WOOD FRAMING WALL+ SHEATHING and PANELING LAYOUTS Sheathing and Paneling Layouts Wood Framing Wall+ automates sheathing and paneling layout creation. Sheathing or paneling layouts can be easily generated
More informationSMART ASSEMBLIES Dimensioning Rules
SMART ASSEMBLIES Dimensioning Rules EDIT DIMENSIONING RULES Main Element Geometry 1 4 3 1 possible dimensioning options area and notes about current operation 2 preview of selected options effects 3 preview
More informationGetting Started with Revit
AUTODESK Autodesk REVIT Revit TRAINING Training TUTORIAL Tutorial Getting Started with Revit FOCUS Focus KUWAIT Kuwait CAD Cad Team 2012-13 Step 01 02 Grid & levels Grid create 5 vertical grid lines grid
More informationMWF Rafters. User Guide
MWF Rafters User Guide September 18 th, 2018 2 Table of contents 1. Introduction... 3 1.1 Things You Should Know Before Starting... 3 1.1.1 Roof Panels Structure Orientation... 3 1.1.2 Member Selection...
More informationCONTENTS CHAPTER 1 WHAT THIS IS ALL ABOUT...
CONTENTS CHAPTER 1 WHAT THIS IS ALL ABOUT... 17 INTRODUCTION... 17 Terminology... 18 MACINTOSH AND WINDOWS... 20 CONVENTIONS USED IN THIS TUTORIAL... 21 Command Menu Title And Pull-Down Menu... 22 Commands,
More informationRevit Structure 2012 Basics:
SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural
More informationRevit Structure 2013 Basics
Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial
More informationChief Architect New Feature List
SYSTEM / PERFORMANCE Chief Architect Premier X4 is available in 64 bit and 32 bit versions. The 64 bit version is more efficient in managing memory and you will see better performance on larger plan files
More informationAdvance Steel 2010 / SP2
Advance Steel 2010 / SP2 This document describes the improvements in Service Pack 2 for Advance Steel 2010. Advance Steel 2010 SP2 is Windows 7 compliant! BOM/LISTS New sorting option in Drawing index
More informationAUGI Tips and Tricks: The Reunion Tour Autodesk Revit Style
AUGI Tips and Tricks: The Reunion Tour Autodesk Revit Style Donnia Tabor-Hanson Cope Architecture AB3279 After many years of having a successful Autodesk University class on AUGI tips and tricks featuring
More information2x6. 2x8. 2x10. Size. 2-2x10 8'-5" w/ 2 NJ 7'-3" w/ 2 NJ
1 Rafter Size Spacing Allowable span 24" 11'-9" 24" 2x6 14'-1" 2x4 12" 15'-6" 12" 24" 14'-10" 24" 2x8 18'-2" 2x6 12" 20'-5" 12" 24" 18'-2" 24" 2x10 22'-3" 2x8 12" 25'-8" 12" 24" 21'-0" 24" 2x12 25'-9"
More informationRevit Structure 2014 Basics
Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More informationAutodesk Revit Architecture 2014
ISI ACADEMY Autodesk Revit Architecture 2014 Getting Started Starting Revit Starting Revit for the First Time Opening a Project File Identifying the User Interface Managing User Interface Understanding
More informationVertical Offset Base and Safety Rail System Installation Instructions
Section 5 Vertical Offset Base and Safety Rail System Installation Instructions The vertical offset base and safety rail assembly are designed to be used in residential construction for sloped or flat
More informationFastener Schedule. a, b, c. FASTENER Roof 3-8d (2 1 / ) / ) 3-10d. 3-10d ( ) 3-16d box nails. (3 1 2 toe nails on one side
ITEM 1 DESCRIPTION OF BUILDING ELEMENTS Blocking between joists or rafters to top plate, toe 2 Ceiling joists to plate, toe 3 4 5 6 Ceiling joists not attached to parallel rafter, laps over partitions,
More informationWorking with Detail Components and Managing DetailsChapter1:
Chapter 1 Working with Detail Components and Managing DetailsChapter1: In this chapter, you learn how to use a combination of sketch lines, imported CAD drawings, and predrawn 2D details to create 2D detail
More informationAssignment 13 CAD Mechanical Part 2
Assignment 13 CAD Mechanical Part 2 Objectives In this assignment you will learn to apply the hatch and break commands along with commands previously learned. General Instructions Hatching 1. When AutoCAD's
More informationAutodesk Revit MEP 2014
ISI ACADEMY Autodesk Revit MEP 2014 Getting Started Starting Revit Starting Revit for the First Time Opening a Project File Identifying the User Interface Components Managing User Interface Components
More informationBIM. e Submission Guideline Structural. Annex 1a. Recommended Process Revit 2010
BIM e Submission Guideline Structural Annex 1a Recommended Process Revit 2010 Building and Construction Authority 5 Maxwell Road #16-00 Tower Block MND Complex Singapore 069110 www.bca.gov.sg Revision
More informationThe Rest of the Story: Using Autodesk Inventor Tools to Complete Facilities Design Documentation and Design
The Rest of the Story: Using Autodesk Inventor Tools to Complete Facilities Design Documentation and Design Instructor: Mike Jolicoeur Autodesk Lab Assistants: Sachlene Singh Autodesk Steve Schuchard PMC
More informationAdvance Steel. Tutorial
Advance Steel Tutorial Table of contents About this tutorial... 7 How to use this guide...9 Lesson 1: Creating a building grid...10 Step 1: Creating an axis group in the X direction...10 Step 2: Creating
More informationLesson 7: Roof Height Change buildings; changing bracing; WideBay Roof Secondary; soldier columns; snow drift.
127 Lesson 7: Roof Height Change buildings; changing bracing; WideBay Roof Secondary; soldier columns; snow drift. Input an Endwall-to Endwall Roof Height Change (Low Building for Office, High Building
More informationMaking a Custom Symbol. Making a Custom Symbol in Chief Architect
TIP in Chief Architect INTRODUCTION Being able to make your own symbols in Chief Architect can be very useful. Not many users take the time to learn how to do this because they believe it to be a difficult
More informationn 4ce Professional Module
n 4ce Fact Sheet n 4ce Professional Module For the discerning user with specialist needs, n 4ce Professional provides extra facilities in Design and 3D presentations. Using the same platform as Lite, extra
More informationRelease Notes - Fixes in Tekla Structures 2016i PR1
Release Notes - Fixes in Tekla Structures 2016i PR1, you can now set the to either or. is modified., the ID of the connection plate is not changed anymore when the connection now uses normal rebar groups
More informationRelease Notes - Fixes in Tekla Structures 2016i SP1
Release Notes - Fixes in Tekla Structures 2016i SP1 is modified., the ID of the connection plate is not changed anymore when the connection now uses normal rebar groups instead of tapered groups., the
More informationBuild a Wall Mockup. Description. Lesson Outcomes. Assumptions. Terminology. Carpenter
Description All walls in a house must be built to correct specifications and size in order to meet building code requirements. In this Activity Plan, students will build mock wall sections, with 48" (1200
More informationJOIST DETAILS Plate nail, 16d (0.15" x 1 ") at 1 on-center Blocking panel: 1 1 8" TJ Rim Board, 1 1 TimberStrand SL or TJI joist Toe nail, 10d (0.11" x ") at on-center A1 CS BEAM DETAILS L1 eb stiffener
More informationKankakee Community College
Kankakee Community College Course prefix and number: DRFT 2414 Course title: Architectural Drafting with Revit Credit hours: 4 Lecture hours: 2 Lab hours: 4 Semester: Spring 2013 Catalog description: Prerequisite:
More informationPLAN CEILING FRAMING PLAN CEILING JOIST SCHEDULE. Tenant Improvements. UNLV Police Station Maryland Parkway.
TYPICAL HEADER, SEE DETAIL 3/ 4 1 6 2 CEILING FRAMING PLAN SCALE: 3/16" = 1'-0" 2 2 4 600S162-43 FLAT BRACE, 4 CEILING JOIST, SEE SCHEDULE, BOXED BEAM: (2) 600S162-54 + (2)14GA TRACKS 2 CEILING JOIST SCHEDULE
More informationKitchen and Bath Design Tutorial
Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques
More informationAutodesk Advance Steel. Drawing Style Manager s guide
Autodesk Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction... 5 Details and Detail Views... 6 Drawing Styles... 6 Drawing Style Manager... 8 Accessing the Drawing Style
More informationAppendix to Chapter 1 Release 3
Appendix to Chapter 1 Release 3 Introduction to AutoCAD Architectural Desktop Release 3 Enhancements to AutoCAD Architectural Desktop Release 3 include changes in the content of the menu bar, toolbars,
More informationAutodesk Medical Center
Autodesk Medical Center Page 1 Contents Autodesk Medical Center... 1 Revit Projects... 3 Exercise 1 Create a new project file... 3 Datum Elements... 4 Exercise 2 Add Grids... 5 Exercise 3 Edit Levels...
More informationA1-1 D O R S E T A V E N U E SITE PLAN SITE PLAN
-2,000 MORNING PATIO ±0 D O R S E T A V E N U E -2,800 SITE PLAN SCALE 1:200 CHECK ALL DIMENSIONS AND LEVELS ON SITE PRIOR TO CONSTRUCTION, REPORT ANY DISCREPANCIES TO THE ER SK 21.03.2014 SITE PLAN 21.03.14
More informationAdvance Steel. Drawing Style Manager s guide
Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction...7 Details and Detail Views...8 Drawing Styles...8 Drawing Style Manager...9 Accessing the Drawing Style Manager...9
More informationAECOsim Building Designer. Quick Start Guide. Chapter 2 Making the Mass Model Intelligent Bentley Systems, Incorporated.
AECOsim Building Designer Quick Start Guide Chapter 2 Making the Mass Model Intelligent 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Making the Mass Model Intelligent...3
More informationApplied Steel Detailing Tekla Structures 11.0 Basic Training February 10, 2005
Tekla Structures 11.0 Basic Training February 10, 2005 Copyright 2005 Tekla Corporation Contents Contents...i 1...3 1.1 AutoConnections...4 1.2 General about the Criteria for Creating Connections...6 1.3
More informationSECTION R507 DECKS DECKING LEDGER BOARD BEAM. FOOTING BEAM SPAN CANTILEVER For SI: 1 inch = 25.4 mm FIGURE R507.2 DECK CONSTRUCTION
SECTION R507 DECKS R507.1 Application. The provisions of this section shall provide prescriptive requirements for the design and construction of all uncovered, wood-framed, single-span exterior decks.
More informationAutodesk Revit Architecture 2014
CADLearning for Autodesk Revit Architecture 2014 Course Details 52+ hours of training 534 video tutorials Exercise files included Instructor: Jason Boehning Course Description CADLearning for Autodesk
More informationKitchen and Bath Design Tutorial
Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques
More informationSheet Metal OverviewChapter1:
Sheet Metal OverviewChapter1: Chapter 1 This chapter describes the terminology, design methods, and fundamental tools used in the design of sheet metal parts. Building upon these foundational elements
More informationDraw IT 2016 for AutoCAD
Draw IT 2016 for AutoCAD Tutorial for System Scaffolding Version: 16.0 Copyright Computer and Design Services Ltd GLOBAL CONSTRUCTION SOFTWARE AND SERVICES Contents Introduction... 1 Getting Started...
More informationCAD Tutorial. CAD Detail Windows. In this tutorial you ll learn about: CAD Detail Windows Exploding and Modifying a CAD Block
CAD Tutorial In this tutorial you ll learn about: CAD Detail Windows Exploding and Modifying a CAD Block Creating a New CAD Block CAD Detail from View Creating a Plot Plan CAD Detail Windows CAD Details
More informationIntroducing AJSTM INSTALLATION GUIDE USA. 8 th Edition USA
The SIMPLE FRAMING SYSTEMSM INSTALLATION GUIDE USA for Floors This Installation Guide is intended to provide general information for the designer and end-user. For further information, please refer to
More informationKankakee Community College
Kankakee Community College Course Prefix and Number: DRFT 2414 Course title: Architectural Drafting with Revit Credit hours: 4 Lecture hours: 2 Lab hours: 4 Semester: Spring 2015 Catalog Description: Prerequisite:
More informationExterior Wall Fastener Schedule
City of Republic Community Development Department Exterior Wall Fastener Schedule REVISION DATE: JANUARY 2017 Design and construction (2012 IRC Section R602.3): Exterior walls of wood frame construction
More informationKitchen and Bath Design Tutorial
Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques
More informationOF LEVELS & ADJUSTMENTS TO THE GRID. Bldg: Levels. PROF. PAUL C. KING RA New York City College of Technology. Learning Community.
Bldg: Levels DEVELOPMENT OF LEVELS & ADJUSTMENTS TO THE GRID Overview: The existing drawing includes 2 levels set 10' apart. For the Lab Building we need to createe a total of 6 levels with a vertical
More informationAASHTOWare Bridge Design Training Weld Design and Weld Fatigue Analysis (BrD 6.5) Topics Covered Part 1: Weld Design/Design Review
AASHTOWare Bridge Design Training Weld Design and Weld Fatigue Analysis (BrD 6.5) Topics Covered Flange to web weld LRFD Design Flange to web weld LRFD Design Review Weld Fatigue Analysis Part 1: Weld
More informationm+p Analyzer Revision 5.2
Update Note www.mpihome.com m+p Analyzer Revision 5.2 Enhanced Project Browser New Acquisition Configuration Windows Improved 2D Chart Reference Traces in 2D Single- and Multi-Chart Template Projects Trigger
More information6x6 Shed Plans and Building Guide
Page 1 Legal 2018 Zac Spade & Christopher D. Brown. All Rights Reserved For information about special discounts available for bulk purchases, sales promotions, fundraising and educational needs, contact
More informationRevit Revit A step by step guide. 11/14/2011 jimmy boone
Revit 2012 Revit A step by step guide 11/14/2011 jimmy boone Contents Environment settings... 4 Setting up a new MEP models... 5 Step 1, beginning from an architectural model... 5 Step 2 (if using a separate
More informationFlexible Automation Solutions For The Offsite Building Industry
Flexible Automation Solutions For The Offsite Building Industry Modular Building Automation Modular Building Automation BV (MBA) is a joint venture between JJ Smith Woodworking Machinery Ltd, based in
More informationAuto-drafting Module for midas Gen MIDAS Information Technology Co., Ltd.
MIDAS Information Technology Co., Ltd. 01 Introduction midas DShop empowers engineers to streamline the design process all the way to generating engineering drawings. midas DShop imports models complete
More informationExpected Skills to be demonstrated: PA Standards/Anchors: Eligible Content: Instructional Strategies: Assessments:
Course Title: Architecture Topic/Concept: Vocabulary Assignments Time Allotment: 36 Days Of Homework, 5 15 Unit Sequence: 1 1. Architectural styles 2. The physical parts of a structure 3. Design process
More informationRoof Tutorial Wall Specification
Roof Tutorial The majority of Roof Tutorial describes some common roof styles that can be created using settings in the Wall Specification dialog and can be completed independent of the other tutorials.
More informationThere are two types of cove light in terms of light distribution inside a room
DIALux evo Tutorials Tutorial 2 How to create a cove light detail In this tutorial you will learn the following commands. 1. Using help lines 2. Using ceiling. 3. Using cutout 4. Using Boolean operation
More informationR-Values: Applications & Air Space Requirements
R-Values: s & Air Space Requirements 1. Do-it-Yourself & Residential s (HVAC) Attic Radiant Barrier NT Radiant Barrier (4800 Series) Attic Air Space Installed on Bottom of Rafters, or Directly to Inside
More informationWorking With Drawing Views-I
Chapter 12 Working With Drawing Views-I Learning Objectives After completing this chapter you will be able to: Generate standard three views. Generate Named Views. Generate Relative Views. Generate Predefined
More informationCOMPUTER AIDED DRAFTING LAB (333) SMESTER 4
COMPUTER AIDED DRAFTING LAB (333) SMESTER 4 Introduction to Computer Aided Drafting: The method of preparing engineering drawing by using the computer software is known as Computer Aided Drafting (CAD).
More informationDesign, Drawing and Sheet Composition
Design, Drawing and Sheet Composition Tools, Technologies and Concepts 1 WWW.BENTLEY.COM 2018 Bentley Systems, Incorporated 2018 Bentley Systems, Incorporated 2 WWW.BENTLEY.COM 2018 Bentley Systems, Incorporated
More informationrunning go tournaments with wintd
running go tournaments with wintd Please send comments and corrections to Larry Russ at lruss@stevens-tech.edu or (201) 216-5379 Contents: page I. Getting and Loading the Program 2 II. Running a Tournament
More informationAECOsim Building Designer. Quick Start Guide. Chapter A08 Space Planning Bentley Systems, Incorporated
AECOsim Building Designer Quick Start Guide Chapter A08 Space Planning 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Space Planning...3 Sketches... 3 SpacePlanner... 4 Create
More informationSwitching to Sub Category and Collapsible Skins
Switching to Sub Category and Collapsible Skins New programming enhancements and features are not compatible with the older Q-Net skins. If you are using either the original Drop Down skin or the Standard
More informationVectorworks Architect
SAMPLE by Jonathan Pickup third edition written with version 2011 Vectorworks Architect Tutorial Manual Table of Contents Introduction... iii How to Use this Manual... iii New Ways of Drawing... iv Vectorworks
More informationIDEA Connection 8. User guide. IDEA Connection user guide
IDEA Connection user guide IDEA Connection 8 User guide IDEA Connection user guide Content 1.1 Program requirements... 5 1.2 Installation guidelines... 5 2 User interface... 6 2.1 3D view in the main window...
More informationESR-1254 * DELETED BY CITY OF LOS ANGELES. Reissued April 1, 2006 This report is subject to re-examination in one year.
ESR-1254 Reissued April 1, 2006 This report is subject to re-examination in one year. www.icc-es.org Business/Regional Office 5360 Workman Mill Road, Whittier, California 90601 (562) 699-0543 Regional
More informationAdvance Steel suite 6.1 / SP2
Advance Steel suite 6.1 / SP2 This document describes only the improvements in Service Pack 2 compared to Service Pack 1. The installation of SP2 includes SP1; please see the previous document for improvements
More informationG. SAMPLE DRAWINGS AND ILLUSTRATIONS INDEX
G. SAMPLE DRAWINGS AND ILLUSTRATIONS INDEX Does not constitute pre-approval, provides samples of authorized styles and designs 1. ARBORS, PERGOLAS, TRELLISES... PAGE 42 2. FENCES A. SPLIT-RAIL... PAGE
More informationT-BRACE / I-BRACE DETAIL WITH 2X BRACE ONLY
August 10, 2010 T-BRACE / I-BRACE DETAIL WITH 2X BRACE ONLY ST - T-BRACE 2 R MiTek Industries, Chesterfield, MO Page 1 of 1 Note: T-Bracing / I-Bracing to be used when continuous lateral bracing is impractical.
More informationOpening the Door to Curtain Walls in AutoCAD Architecture, Part I
Opening the Door to Curtain Walls in AutoCAD Architecture, Part I David Driver, President 4D Architects, Ltd. AB210-3 This class gives you a kit of parts and a set of rules methodology for understanding
More informationAutodesk University Project Navigator to the Rescue in AutoCAD Architecture: Fix Standard Mismatches in a Project
Autodesk University Project Navigator to the Rescue in AutoCAD Architecture: Fix Standard Mismatches in a Project Good afternoon. Thank you for choosing the class Project Navigator to the Rescue in AutoCAD
More informationAbaqus Beam Tutorial (ver. 6.12)
Abaqus Beam Tutorial (ver. 6.12) Problem Description The two-dimensional bridge structure is simply supported at its lower corners. The structure is composed of steel T-sections (E = 210 GPa, ν = 0.25)
More informationFeaturing TJ Rim Board and TimberStrand LSL
#TJ-8000 SPECIFIER S GUIDE TRUS JOIST RIM BOARD Featuring TJ Rim Board and TimberStrand LSL Multiple thicknesses, grades, and products to cover all your rim board needs 1¼" Thickness matches lateral load
More informationThis document describes the new features of MTpro version as compared to MTpro
New features in MTpro 3.6 This document describes the new features of MTpro version 3.6.0.0 as compared to MTpro 3.5.0.0. Table of contents 1 General... 2 2 New contents... 3 2.1 New CAD models... 3 2.2
More informationTutorial 4: Overhead sign with lane control arrows:
Tutorial 4: Overhead sign with lane control arrows: SignCAD Analysis The sign above splits multilane freeway traffic into two routes/destinations. It uses the overhead lane control arrows. The top half
More informationFor Evaluation Only. Copyrights
xi Dedication Foreword Acknowledgments About the Author Accessing Tutorial Files Free Teaching Resources for Faculty Dimension Units and Dialog Box Captures Preface Chapter 1 - Introduction to Autodesk
More information036-ShopDrawings hsbinoutput/shop Drawings
1 FUNCTION The function of this document is to provide information on how to use the shop drawings (hsbinoutput\shop drawings) in hsb2009+. In hsbcad you have Element drawings that can be generated automatically
More informationLattice Design Solid Infills. Tutorial_V2 : 13,0600,1489,1616(SP6)
Lattice Design Solid Infills Tutorial_V2 : 13,0600,1489,1616(SP6) Introduction 3DXpert for SOLIDWORKS includes tools for creating optimized structures, using Lattices and Infills. Infills are structures
More informationKitchen and Bath Design Tutorial
Adding Cabinets Chapter 5: Kitchen and Bath Design Tutorial This tutorial continues where the Materials Tutorial left off. You should save this tutorial using a new name to archive your previous work.
More informationIDEA Connection 8. User guide. IDEA Connection user guide
IDEA Connection user guide IDEA Connection 8 User guide IDEA Connection user guide Content 1.1 Program requirements... 5 1.2 Installation guidelines... 5 2 User interface... 6 2.1 3D view in the main window...
More informationLevels. Chapter Nine PLAY VIDEO INTRODUCTION LEVEL MANAGER AND LEVEL DISPLAY DIALOGS LEVEL MANAGER DIALOG
Chapter Nine Levels PLAY VIDEO INTRODUCTION A design file consists of any number of levels. A level is a way of separating CAD data much the same way as a clear sheet of acetate is used by an architect
More informationDharmapuri LAB MANUAL. : B.E. - Civil Engineering Year & Semester : I Year / II Semester
Dharmapuri 636 703 LAB MANUAL Regulation : 2013 Branch : B.E. - Civil Engineering Year & Semester : I Year / II Semester CE6261-COMPUTER AIDED DRAFTING AND MODELLING LABORATORY ICAL ENG VVIT DEPARTMENT
More informationNCSS Statistical Software
Chapter 147 Introduction A mosaic plot is a graphical display of the cell frequencies of a contingency table in which the area of boxes of the plot are proportional to the cell frequencies of the contingency
More informationTABLE OF CONTENTS. INTRODUCTION...5 Advance Steel...5 Where to find information?...6 Contacting technical support...6
TABLE OF CONTENTS INTRODUCTION...5 Advance Steel...5 Where to find information?...6 Contacting technical support...6 INSTALLATION...7 System requirements...7 Starting the installation...7 STARTING ADVANCE
More informationEstimaXpro. S&R Consultants
EstimaXpro S&R Consultants Contents 1. Introduction... 5 2. Masters... 7 2.1 Project Details... 7 2.2 Storey Details... 8 2.3 Joinery Details... 8 2.4 Rate types... 9 2.5 Rates... 9 2.6 Rate Analysis Type...
More informationAttach Trusses and Rafters Faster
Attach Trusses and Rafters Faster SDWC TRUSS Screw Truss-to-Plate Connections For Truss-to-Plate Connections The Strong-Drive SDWC TRUSS screw provides a truss- and rafter-to-top-plate connection. The
More informationCreate styles that control the display of Civil 3D objects. Copy styles from one drawing to another drawing.
NOTES Module 03 Settings and Styles In this module, you learn about the various settings and styles that are used in AutoCAD Civil 3D. A strong understanding of these basics leads to more efficient use
More informationBUILDING PLANS. BUILDING INSPECTIONS DEPARTMENT
BUILDING PLANS BUILDING INSPECTIONS DEPARTMENT 507-537-6773 www.ci.marshall.mn.us This handout is intended only as a guide to the subject matter covered herein and is based in part on the 2015 Minnesota
More information