Product catalogue 2018/19
|
|
- Virginia Ball
- 5 years ago
- Views:
Transcription
1 Product catalogue 2018/1 Solar mounting components
2 Table of contents Roof hooks Page 2 Fasteners for trapezoidal and corrugated roofing Page Clamps Page 13 Profiles Page 14 Connecting elements Page 17 Accessories for profiles and connectors Page 18 Elevation angles Page 18 Module mounting parts Page 20 Mounting accessories Page 25 Free of cost sample-ordering Page 28 Overview mounting systems Page 2 Certifi ed to EN :2000 +A1 :2011
3 Your contact persons Markus Stehle and Katja Pasold Managing directors Detlef Penzel Sales force Phone altec-metalltechnik.de Annelie Steinmark Sales mounting systems Phone altec-metalltechnik.de Kristin Eichler Sales mounting systems Phone altec-metalltechnik.de Doreen Schilling Sales mounting systems Phone altec-metalltechnik.de Katja Wisotzki Sales solar components Phone altec-metalltechnik.de Ines Görler I am on parental leave and will soon be back! Building approval DIBt Z issued comp mpli lian t componen ents
4 Shingle roof hook Shingle- and slate roof hooks are screwed through the formwork upon the rafter. Two 6 80 mm sunk woodscrews are required to attach the short shingle roof hooks, for long slate roof hooks you need three. After mounting a careful sealing of the roof hook is necessary. For slate covering you need a cover plate in addition. This plate replaces the slate at the location of the roof hook. Shingle roof hook Material: 6 mm stainless steel ; hole 7 sunk For use with full-thread woodscrew for wood connection as of Z Shingle roof hook height adjustable Material: 6 mm stainless steel ; hole 7 sunk For use with full-thread woodscrew for wood connection as of Z d 70 d 70 5 d Slot 15S S S S S d Slot 15S003568H S003561H S004068H S004061H00 11 Roof mounting parts 2
5 Slate roof hook Shingle- and slate roof hooks are screwed through the formwork upon the rafter. Two 6 80 mm sunk woodscrews are required to attach the short shingle roof hooks, for long slate roof hooks you need three. After mounting a careful sealing of the roof hook is necessary. For slate covering you need a cover plate in addition. This plate replaces the slate at the location of the roof hook. Slate roof hook Material: 6 mm stainless steel ; hole 7 sunk For use with full-thread woodscrew for wood connection as of Z Slate roof hook height adjustable Material: 6 mm stainless steel ; hole 7 sunk For use with full-thread woodscrew for wood connection as of Z d d d Slot 15S S S S S d Slot 15S103568H S103561H S104068H S104061H00 11 You need slate roof hooks with your specifications? We create you an offer! Name Phone a = b = c = f = Slot Slot 11 height adjustable Quantity Roof mounting parts info@altec-metalltechnik.de 3
6 Plain tile roof hook without base plate Plain tile roof hooks for roofs with plain tile covering are screwed directly upon the rafter with two flat head screws. Since the lengthwise protruding bracket of the plain tile roof hooks rests on the tiles beneath, we recommend replacing the clay tile with a metal tile. Please contact us with regard to crown tiles so that we can match the material to the roofing. To avoid edge pressure it is recommended to use EPDM-strips 40 3 ( 5EPDM ) where the roof hooks hit. Plain tile roof hook without base plate Material: 6 mm stainless steel ; hole, for use with flat head screw with countersunk slit (approv. no. Z ) Plain tile roof hook without base plate, height adjustable Material: 6 mm stainless steel ; hole, for use with flat head screw with countersunk slit (approv. no. Z ) d d d Slot 15B B d Slot 15B003568H B004068H00 40 You need plain tile roof hooks with your specifications? We create you an offer! Roof mounting parts a = b = c = d = e = f = Name Phone with base plate: , Holes , Holes , Holes , Holes Slot Slot 11 height adjustable Quantity info@altec-metalltechnik.de
7 Plain tile roof hook with base plate Plain tile roof hooks for roofs with plain tile covering are screwed directly upon the rafter with two flat head screws. Since the lengthwise protruding bracket of the plain tile roof hooks rests on the tiles beneath, we recommend replacing the clay tile with a metal tile. Please contact us with regard to crown tiles so that we can match the material to the roofing. To avoid edge pressure it is recommended to use EPDM-strips 40 3 ( 5EPDM ) where the roof hooks hit. Plain tile roof hook with base plate Material bracket: 6 mm stainless steel Material base plate: 4 mm stainless steel , 2 6 holes For use with flat head screw with countersunk slit (approval no. Z ) Plain tile roof hook with base plate, height adjustable Material bracket: 6 mm stainless steel Material base plate: 4 mm stainless steel , 2 6 holes For use with flat head screw with countersunk slit (approval no. Z ) d 120 d d Slot 12B B B B d Slot 12B013568H B013561H B014068H B014061H00 11 Roof mounting parts 5
8 Pantile roof hook Pantile roof hooks have been especially designed for use on pantile roofs and are screwed directly onto the rafters. If the batten is higher than 30 mm we recommended using a rafter shim and longer flat head screw. Pantile roof hook Material bracket: 6 mm stainless steel Material base plate: 4 mm stainless steel , 2 6 holes For use with flat head screw with countersunk slit (approval no. Z ) Pantile roof hook height adjustable Material bracket: 6 mm stainless steel Material base plate: 4 mm stainless steel , 2 6 holes For use with flat head screw with countersunk slit (approval no. Z ) d 130 d d Slot 12P P P P d Slot 12P113568H P113561H P114068H P114061H00 11 You need pantile roof hooks with your specifications? We create you an offer! Roof mounting parts a = b = c = d = e = f = g = Name Phone with base plate: , holes , holes , holes , holes Slot Slot 11 height adjustable Quantity info@altec-metalltechnik.de
9 Pantile roof hooks for special requirements Pantile roof hook for higher static load Material bracket: 8 mm stainless steel Material base plate: 4 mm stainless steel , 2 6 holes For use with flat head screw with countersunk slit (approval no. Z ) Pantile roof hook Double height adjustable Material bracket: 6 mm stainless steel Material base plate: 4 mm stainless steel , 2 6 holes For use with flat head screw with countersunk slit (approval no. Z ) d P d H H Roof mounting parts 7
10 Accessories for roof hooks Cover plate for slate roof hooks Material: aluminium 0.8 mm Other dimensions on request! For use with two screws ( 4ASIV ) We recommend to apply an expansion strip between the plate and the slate. Metal tile for plain tile Material: aluminium 0.8 mm Other dimensions on request! The metal tile for plain tile covering prevents the lower tile being crushed by the load. Because the clay tile does not need to be cut out, installation is greatly simplified. The metal tile is cut to standard size and is fixed to the rafter with two screws (item no: 4ASIV ). Alternatively, with crow tiles, it is hung to the tile beneath. We recommend to apply an expansion strip between the plate and the slate. Measures Measures Rafter slim mm; Material: wood Differences in height created by uneven battens or roof warping can be resolved by using rafter shims. Compensating sheave mm; Material: aluminium If height differences are present, these allow for better and even rail positioning. Thickness Thickness Slot Roof mounting parts 8 Expanding water stop reel Expanding water stop is used as a water proofing seal, for example with metal tiles on roof or with plain tile roofing as a seal on the transition to the roofing. 5QB Measures Thickness 4 ; reel = 8 m
11 Trapezoidal roof mounting parts ALTEC SD_TRAFIX-H Material: aluminium, EN AW-6063 T66; pierced; with EPDM tape laminated; delivery includes 2 thin metal screws ALTEC SD_TRAFIX-V-SELECT Material: aluminium, EN AW-6063 T66; pierced; with EPDM tape laminated; delivery includes 4 thin metal screws NEW 1TCB TVE for ledge spacing 177, 183, 10, 207, 214, 250, 275, 280, 305, 310, 315, 333, 350, 375 ALTEC SD_TRAFIX-V Material: stainless steel (trapezoidal sheet fastener); A2-70 (thin metal screws); aluminium (profile); black plastic (end caps) EPDM tape close cell, glue on one side only, reel Description Measures Thickness 1TF TF TF single sheet fastener Two sheet fasteners with 450 mm profile standard and 4 thin metal screws as TF , with end caps 5EPDM EPDM EPDM EPDM EPDM NEW EPDM tape close cell, glue on one side only, strip Measures Thickness 1EPDM EPDM EPDM Roof mounting parts
12 For this check list as download and further check lists please visit Check list for trapezoidal metal shoe Enquiry Order (mark with a cross where applicable) info@ altec-metalltechnik.de Name: No./address: Post code/town: Telephone: Fax: Number of units*: Delivery date: *In the case of trapezoidal metal shoes a quantity deviation of approx. + 1 % and/or 1 unit) of the total quantity is possible. with plate with angled bar with bar with welded bolt Slot: M8 M10 Slot: M8 M10 Slot: M8 M10 Threaded bolt: M8 M10 Accessories With drilling screws: yes no with EPDM tape: cutted linear meters Sizes Please measure the seams of the corrugation so that we can calculate an individual o er for you. We can supply you with 2 mm thick EPDM strip for the trapezoidal shoe at an additional cost. c a d a: mm b: mm c: mm d: mm Roof mounting parts f Material of corrugated sheet: b f: mm 10 Place/date: Company stamp/signature:
13 Trapezoidal shoes custom made product Trapezoidal shoes with different attachments will be especially produced for the needed crown widths. This helps to ensure optimal fit and leak on the roof. The choices are three different attachments: Bridge, angle or threaded bolts. Due to the bearing surfaces of the trapezoidal shoe can ensure optimal power transfer to the roof. It is among other things very well suited as a basis for an elevated trapezoidal roof mounting. It is supplied with EPDM-sealing tape. Please use our checklist for trapezoidal shoes! Trapezoidal shoe with plate Trapezoidal shoe with welded bolt on request Description with bolt M8 or M10 60 Top width mm mm mm Trapezoidal shoe with angled bar Trapezoidal shoe with bar Description Slot Top width Angle mm Angle mm Angle mm Angle mm Angle mm Angle mm Description Slot Top width Bar mm Bar mm Bar mm Bar mm Bar mm Bar mm Roof mounting parts 11
14 Trapezoidal/corrugated roof mounting parts Hanger bolt with locking nuts and EPDM-sealing washer Material: stainless steel Hanger bolts or dowel screws with wood thread (lower) and machine thread (upper). They are delivered pre-assembled with an EPDM sealing washer, securing nuts and two locking nuts. Adapter plate for hanger bolts or threaded rod fastenings Material: stainless steel Adapter plates are used as connecting elements between hanger bolts or threaded rods and profile rails. Rails are fastened with hammer head screws via the slot and can be positioned this way. The round hole is used to fasten the adapter to the hanger bolt. with calotte/storm calotte on request Measures Hexagon bolt M SW7 4112M M SW Measures Hanger bolt Mounting screw 15AB M10 M8 15AB M12 M8 15AB M12 M10 15AB M12 M10 Solar fastener for wave profile or trapezoidal sheet with self-tapping thread Material: stainless steel The solar fastener can be used in steel girders with a thickness of 1.5 to 10 mm. Depending on the material, pre-drilling before assembly may be required. Roof mounting parts Threaded upper section Length M10 50 or M , 125, 150,
15 Clamps for folding roofs For all clamps you must ensure that the first profile rail runs transverse to the felt. If required, install a cross connector. For a save mounting it is recommended checking of the connection between roofing surface and roof construction through experts. Standing seam clamp Material: stainless steel Standing seam clamp Material: stainless steel Hole Clamping range Hole Clamping range Rolled top standing seam clamp Material: stainless steel Folded sheet metal clamp (RIB-ROOF) Material: stainless steel Hole Hole Used for RIB-ROOF RIB-ROOF Custom solutions for other seam roofs You have a very special seamed roof but no suitable clamping? Our experienced team will develop your special solution. Please let us have a sample of the seamed roof together with your enquiry and we will reach a tight fit. Roof mounting parts 13
16 Profiles Material: aluminium, EN AW-6063 T66 Channel width 11; slot width 22.4 to accept hammer-head screws Length over 6,000 mm on request. Additional standard rail length We are now supplying a new standard length for our 28 28, 33 38, light and standard profiles: 5200 mm. Saving This length fits perfectly with current module widths of one metre. You will save on the cost of materials and don t need to cut rails to size on site. We have also priced in a saving for you on this rail length it s worth comparing! We can make you an offer at a comparable price to the standard 6-metre rails. Profile Profile Length Weight 630P , P cut to required length kg/m (up to 6,000) Length Weight 630P P cut to required length 0,602 kg/m (up to 6,000) Profile Profile Profiles and connectors 14 Length Weight 630P , P , P NEW cut to required length (up to 6,000) 0.75 kg/m Length Weight 630P , P , P NEW cut to required length (up to 6,000) kg/m
17 Profiles Material: aluminium, EN AW-6063 T66 Channel width 11; slot width 22.4 to accept hammer-head screws Length over 6,000 mm on request. Profile light Profile standard Length Weight 630P04040L61 6, P04040L52 5,200 NEW 630P04040L41 4, P04040L01 cut to required length (up to 6,000) 0.66 kg/m Length Weight 630P04040S60 6, P04040S52 5,200 NEW 630P04040S40 4, P04040S00 cut to required length (up to 6,000) kg/m Profile standard, black anodised Profile Length Weight 63EP04040S60 6,000 13EP04040S00 cut to required length kg/m (up to 6,000) Length Weight 630P , P cut to required length kg/m (up to 6,000) Profiles and connectors 15
18 Profiles Material: aluminium L-Profile T-Profile Measures Length Weight 630W30303C kg/m 630W40404C kg/m 6, W50504C kg/m 630W50505C kg/m Measures Length Weight 630T60804C , kg/m Special profiles and connectors on request Material: aluminium, EN AW-6063 T66 Profile Connector/Expansion connector for profile Connector includes 8, expansion connector includes 4 drilling screws JT3-6-5,5 25, without sealing washer Profile Minimum order 1 t = 360 m Profile Minimum order 1 t = 280 m Profiles and connectors 16
19 Connecting elements Cross connector Material: aluminium, EN AW-6063 T66 Attachment of 38 33, Standard, 40 60, and profile rails to other profiles (cross connection) Profile connector 4-hole Material: stainless steel for profiles 28 28, 38 33, light and standard The profile connectors are delivered completely pre-assembled with hammer head bolts and locking nuts. pre-assembled with Measures/Description K000 Cylinder head screw M6 16, threaded plate K for rail connection outside of the centre of moments K000 Hammer head screw M8 20, hex nut, washer K for rail connection at the centre of moments K000 Hexagon head screw M6 16, threaded plate, washer L-angle Material: stainless steel pre-assembled with 2 hammer head screws and locking nuts Expansion connector Material: aluminium, EN AW-6063 T66 Measures K K0010 for profiles 28 28, 38 33, light and standard, Z-angle Material: stainless steel pre-assembled with 2 hammer head screws and locking nuts Measures K Profiles and connectors 17
20 Accessories for profiles and connectors Edge clip Material: polyamid 6.6, UV stabilised Cable tie Material: polyamid 6.6, UV stabilised 5KANSW KANSW Used for parallel to edge transverse to edge Measures 5UNISW , End cap for profile rails Material: black plastic Lightning protection Measures Elevation angles Elevation angles from the ALTEC Metalltechnik GmbH range are manufactured specifically for your particular project. Therefore, it is necessary that we receive your required module installation angle and existing roof slope. We also machine the base fixing holes in order to position the holes precisely please complete the check list. All parts are delivered unassembled and then simply bolted together on site. Pre-assembled and welded angles can be supplied for a surcharge. The size and design of the elevation angle should always consider the local conditions and load requirements. Please use our check list for elevation angles! Profiles and connectors 18
21 For this check list as download and further check lists please visit Check list for elevation angles Enquiry Order (mark with a cross where applicable) info@ altec-metalltechnik.de Name: No./address: Post code/town: Telephone: Mobile phone: Fax: Units required: Elevation normal a Distance between contact points b Lower edge of angle to lower edge of module mm mm a α c b c Distance between angles mm Elevation angles Number of diagonal struts units multiple a Distance between contact points a 1 Distance between contact points mm mm b Lower edge of angle to lower edge of module mm a α c b c Distance between angles mm Elevation angle Number of diagonal struts units Modules Module size: Length: mm Width: mm Height: mm Weight: kg Module arrangement: vertical horizontal Do you require a structural stability analysis? yes no Profiles and connectors 1
22 Clamping plates Clamping plate for use in smallest possible module spacing (7 mm), hole for screw M8 on request Plate size , Material: aluminium, EN AW-6063 T66 Clamping plate unmounted Clamping plate unmounted, black anodised for screw M6 313E for screw M6 Clamping plate with hexagon bolt Delivery includes threaded plate M6, hexagon bolt and washer Other module heights available on request. Clamping plate with hexagon bolt, black anodised Delivery includes threaded plate M6, hexagon bolt and washer Other module heights available on request. Module height Screw M M M M M6 65 Module height Screw 113E M E M E M E M E M6 65 Module mounting parts 20
23 Mid-clamps Module space 1 mm, Clamp length 70 mm, hole for screw M8 on request Material: aluminium, EN AW-6063 T66 Mid-clamp unmounted Mid-clamp unmounted, black anodised for screw M6 31E for screw M6 Mid-clamp with cylinder head screw Delivery includes threaded plate M6 and cylinder head crew Other module heights available on request. Mid-clamp with cylinder head screw, black anodised Delivery includes threaded plate M6 and cylinder head crew Other module heights available on request. Module height Screw M M M M M6 40 Module height Screw 11E M E M E M E M E M6 40 Module mounting parts 21
24 End-clamps Clamp length: 40 mm (individual length and other module heights on request) Material: aluminium, EN AW-6063 T66 hole for screw M8 on request End-clamp with bar without bar Module height Type unmounted with cylinder head screw with hexagon bolt 31 with bar with bar without bar without bar with bar without bar with bar without bar without bar with bar without bar End-clamp black anodised with bar without bar Module height Type unmounted with cylinder head screw with hexagon bolt Module mounting parts with bar 31E E E with bar 31E E E without bar 31E E E without bar 31E E E with bar 31E E E without bar 31E E E with bar 31E E E without bar 31E E E without bar 31E E E with bar 31E E E without bar 31E E E
25 Slip protection Slip protection end-clamp Slip protection cylinder head screw Material: A2, for mounting hole 6 mm with cylinder head screw with hexagon bolt Module height Screw M6 10 Slip protection end-clamp, black anodised mit Zylinderkopfschraube with hexagon bolt Module height 11E E E E E E E E E E E E E E E E E E E E E E Module mounting parts 23
26 Universal clamps Universal mid-clamp Material: aluminium, EN AW-6063 T66 Clamp length: 70 mm, module space 1 mm Delivery includes snap fit block M6 and cylinder head screw M6 25. Other module heights available on request. Universal mid-clamp black anodised Material: aluminium, EN AW-6063 T66 Clamp length: 70 mm, module space 1 mm Delivery includes snap fit block M6 and cylinder head screw M6 25. Other module heights available on request. Module height Module height 11E Universal end-clamp Material: aluminium, EN AW-6063 T66 Clamp length: 70 mm. Delivery includes snap fit block M6 and cylinder head screw M6 40 resp. 45. Universal end-clamp black anodised Material: aluminium, EN AW-6063 T66 Clamp length: 70 mm. Delivery includes snap fit block M6 and cylinder head screw M6 40 resp. 45. Module height Module height 11E E Universal module clamping for horizontally, elevated module mounting set Material: aluminium, EN AW-6063 T66 Material: aluminium, EN AW-6063 T66 Material: stainless steel Module mounting parts Clamp Anti-slide protection Slip protection Modulhöhe Screw M
27 Mounting accessories Hammer head screw Material: A2-70, General building approval Z Locking nut DIN 623 Material: A2-70 Size 40HKS M HKS M HKS M HKS M10 30 Size M M M12 Hexagon nut DIN 34 (EN ISO 4032) Material: A2-70 Threaded plate Material: A2, General building approval Z Size M M M M12 40GP for screw M6 System mat with fixing flaps foil-laminated Upper side with fixing flaps, the bottom side (foil-laminated) prevents the migration of plasticizers between roof cladding and building protection mat 5BSMA Measures mm Mounting accessories 25
28 Mounting accessories Hexagon bolt M6 DIN 33 (EN ISO 4017) Material: A2-70 Hexagon bolt M8 DIN 33 (EN ISO 4017) Material: A , ,38 4 Length 10 5,3 Length 13 Length Length Thin metal screw self-tapping Material: A2-70, general building approval Z , Z Drilling screw Ruspert -Covering Material: A2-70 general building approval Z , Z d l 4BSRP d l Cylinder head screw with hexagon socket DIN 12 (EN ISO 4762) Material: A2-70 Torx head countsunk wood screw with internal serration fully threaded Material: A2-70 general building approval Z Mounting accessories d l d l 4ASIV
29 Mounting accessories Flat head screw with countsunk slit Material: A2-70 general building approval Z Hexagon head wood screw M8 DIN 571 Material: A2-70 dk d 8 14,2 l 5,5 0,6l Length 13 d l dk Length 4TKIT TKIT , Washer DIN 125 (EN ISO 708) Material: A2-70 Washer DIN 021 (EN ISO 703) Material: A2-70 Size Size for M for M for M for M for M for M for M for M12 Mounting accessories 27
30 Free samples You are welcome to configure your own sample set based on the individual components in this catalog. Request of samples is free of charge. Sample for pitched roof system MUSDM01 Contains: 1 shingle roof hook, 1 pantile roof hook, 1 profile standard, 1 profile 38 33, 1 end cap für profile 40 40, 1 cross-connector, 1 end-clamp, 1 mid-clamp, 1 slip protection end-clamp, 1 hammer head screw, 1 locking nut with serrated flange Sample for pitched roof system black anodised MUSDME01 Contains: 1 profile standard, 1 end-clamp, 1 mid-clamp, 1 slip protection end-clamp Free of cost sample-ordering 28 Sample for trapezoidal roof mounting MUTDM01 Contains: 1 ALTEC SD_TRAFIX-V-SELECT, 1 ALTEC SD_TRAFIX-V, 1 ALTEC SD_TRAFIX-H
31 ALTEC SD_ON-ROOF Pitched roof system on-roof mouting Select the roof mounting parts in accordance to your roof cladding: Roof hooks for numerous kinds of roof covering (shingle, slate, plain tile or pantile) Hanger bolts and solar fasteners are used for roofs with corrugated sheeting Subsequently the profile rails will be mounted (vertically or horizontally) Vertical module mounting After assembling of the mounting rails on the roof mounting parts the module will be fitted on them. Vertical mounting on tiles and corrugated roofs Horizontal module mounting (cross connection) The profiles will be assembled on the roof mounting parts. The mounting rails will be fixed on the profiles by using cross-connectors. Select from our range of clamps the most optimal component. There are module clamping angles or alternatively end-clamps and clamping plates or alternatively midclamps. Horizontal mounting (cross connection) on tiles, seamed and corrugated roofs Our Check list mounting system can be found at Overview mounting systems 2
32 ALTEC SD_TRAFIX Trapezoidal roof-mounting ALTEC SD_TRAFIX-H (for horizontal module installation) Use therefore our trapezoidalc-profile connector, which only consists of four parts: One piece cut c-profile (pre-drilled and with EPDM tape covered), one piece of midclamp and end-clamp as well as two thin metal screws. No pre-drilling necessary. ALTEC SD_TRAFIX-V (for vertical module installation) Universal using of our trapezoidal mounting system on almost all trapezoidal metal roof covering. It guarantees an easy and fast mounting, less material necessary. Overview mounting systems Overview mounting systems NEW ALTEC SD_TRAFIX-V-SELECT (for vertical module installation) For urgent projects on trapezoidal roofs with module installed vertical, this mounting system means you can work cost-effectively and flexibly. You can mount every module width with ease, because you can choose to position the solar modules at any point on the rail. 30
33 ALTEC SD_VARIO Pitched roof systems elevated assemblies If the roof isnʼt sloped enough, the modules can be elevated by our mounting systems for pitched roofs to get the maximum yield. With an elevation angle, the slope of the module can be adjusted to gain the maximum annual efficiency. The construction of that elevation angle each containing a support, bearing and base angle is aligned and assembled locally. An optimum utilization of the roof surface is achieved when all elevation angles are erected on a continuous base angle. The distance between the module rows depends on the shade factor. The type of mounting system used depends on the roof covering. Hanger bolts, trapezoidal shoes or roof-hooks can all be used for attaching the angles. The selection of the material and design is determined by the individual parameters (e. g. slope of the roof, wind and snow load). Vertically and horizontally mounted modules Elevation with continuous base angle Fastening with hanger bolt, roof hook or trapezoidal shoe Our Check list elevation angles can be found at Overview mounting systems 31
34 ALTEC FD_COMPACT Optimised flat roof ballast system Also suitable for higher snow loads! Both the South and the eastwest-elevated system are suitable for use on most flat roofs with a maximum slope of 5. The 15 angle frames are physically connected by a continuous base rail. Thanks to this cross-linked structure an area up to within 0.5 m from the roof edge can be used for module placement. This is possible on a building height of up to 25 meters, even for flat roofs without parapets. The framed modules are horizontally attached to the frame bases which allows rapid assembly without any need for additional clamps. The ALTEC flat-roof mounting system has been optimised by wind tunnel tests. For south facing elevations the ballast is applied on the rear wind sheet, with the eastwest elevation frames have ballast laid on the rails underneath the modules. Overview mounting systems 32 Our Check list ballast optimised flat roof system can be found at
35 ALTEC FD_VARIO Flat roof systems with different elevation angles Ballast free adhesive mounting This elevation can be fixed to almost all foil and bitumen roofs without ballasting. The rails are fixed directly to the roof with special laminate pointing. The roof covering has to be sufficiently fixed to the load carrying frame. The installers must be certified before commencement. The modules can be arranged exclusively horizontally next to each other. Advice, planning and projection occurs by our trained staff. Edging stone ballasting If edging stones are used to weigh down the system, these are put directly onto the arms of the aluminium T-profile. You should put building protection mats under the elevation angles to protect the roofing and prevent indentations. A vertical and horizontal module assembly is possible. The installation of wind plates can reduce the required ballast. Our Check lists elevation angles and ballast free adhesive mounting can be found at Overview mounting systems 33
36 ALTEC Metalltechnik GmbH Industriegebiet Crispendorf GERMANY Phone Fax info@altec-metalltechnik.de facebook.com/altec.metalltechnik All rights reserved 2018 ALTEC Metalltechnik GmbH Photos: ALTEC Metalltechnik GmbH Photo U1: thinkstockphotos.de All information about product characteristics, such as measurements, weights and colours in the catalog is based on available knowledge at time of printing, subject to technical changes and errors. Our Terms and Conditions of Sales and Delivery can be found on our website at All dimensions are indicated in mm.
Product catalogue 2017/18
Product catalogue 2017/18 Solar mounting components Table of contents Roof hook Page 2 Fasteners for trapezoidal and corrugated roofing Page 9 Clamps Page 13 Profiles Page 14 Connecting elements Page 18
More informationOn-roof system Alpha + Product catalogue
On-roof system Alpha + Product catalogue Contents ALPHA +... 3 1. ALPHA + BASE RAILS... 4 2. ALPHA + SPLICES... 5 3. ALPHA + TELESCOPING END PIECES... 6 4. ALPHA + INTER-MODULE CLAMPS AND MODULE END CLAMPS...
More informationRoof fastener. Perfectly thought out for every roof
Roof fastener Perfectly thought out for every roof 1 Welcome to the world of clever solutions Solutions for every roof In our production areas we produce all needed components for the sub construction
More informationComponents Catalog. Mounting Systems. Version 18.01, updated: 05/25/2018
Components Catalog Mounting Systems Version 18.01, updated: 05/25/2018 1 Index IBC TopFix 200 Components... 5 Roof Tiles... 6 Roof Hook Alu-Vario S+... 6 Roof Hook Alu-Mammut S+... 6 Roof Hook Alu-Mammut
More informationSolar. mounting solutions. system components.
Solar mounting solutions system components ABOUT REMOR REMOR Solar is the largest manufacturer of solar mounting systems in Poland. throughout the entire Europe, supplying mountings to over 200 MW of PV
More informationPole Mount Installation Manual
Pole Mount Installation Manual Thank You for Choosing AIMS Power! 1. AIMS Power is a leading supplier of solar products, specializing in PV mounting systems. We ensure our products are manufactured to
More informationAccessories. Module clamps. TTModule clamps 22. TTSelf-drilling wood screw, flange head 24. TTSelf-tapping hexagon screw with sealing washer 24
Accessories TTModule clamps 22 TTSelf-drilling wood screw, flange head 24 TTSelf-tapping hexagon screw with sealing washer 24 TTT-bolt and flange nuts with serration 24 TTMK2 slot nuts with assembly clip
More informationMounting systems for solar technology
Mounting systems for solar technology ASSEMBLY INSTRUCTIONS Crosshook 3S CrossHook 4S GB Table of contents TABLE OF CONTENTS THE COMPANY SAFETY REGULATIONS MATERIALS REQUIRED TOOLS REQUIRED ASSEMBLY 2
More informationMounting systems for solar technology
Mounting systems for solar technology ASSEMBLY INSTRUCTIONS Roof Fastener System CrossHook 2G GB Table of contents TABLE OF CONTENTS THE COMPANY SAFETY REGULATIONS MATERIALS REQUIRED TOOLS REQUIRED ASSEMBLY
More informationVarioSole SE. Installation instructions
VarioSole SE Installation instructions INTRODUTION Product Information VarioSole is a universal, easy to install system for the mounting of framed PV modules on pitched roofs with a roof pitch between
More informationPole Mounting System Installation Manual
Pole Mounting System Installation Manual Thank You For Choosing Hopergy! Why Hopergy 1. Hopergy is a professional supplier, specialising in PV mounting systems. We have experienced engineers and strong
More informationALUMINIUM SOLAR MOUNTING SYSTEM. Components catalogue FOR ALL TYPES OF ROOFS AND SITES
Components catalogue MOUNTING RAILS CARRIERS FOR RAILS FASTENERS BOLTS AND NUTS CLIPS FLAT ROOFS STRUCTURES FREE FIELD SYSTEMS COMPLEX ROOFS SYSTEMS ALUMINIUM SOLAR MOUNTING SYSTEM FOR ALL TYPES OF ROOFS
More informationInstallation instructions. Novotegra for Corrugated Fibre Cement / Sandwich Roofs
Installation instructions Novotegra for Corrugated Fibre Cement / Sandwich Roofs I CONTENTS 1 General information... 0 2 Novotegra: mounting system planning... 1 2.1 Solar-Planit software... 1 2.1.1 General
More informationINSTALLATION INSTRUCTIONS TRI-ROOF. energy for a better world
energy for a better world INSTALLATION INSTRUCTIONS TRI-ROOF The flexible roof integration system Compatible for framed module types* Simple exchange of modules Replaces existing roofing Special profiles
More informationOn-Roof Mounting Sets for Flat-Plate Collectors
Engineering Submittal Sheet Installation sets for collectors Fig. 1 Installation set for 2 collectors 1 basic installation set, 1 extension installation set Basic installation set for each collector array
More informationMOUNTING INSTRUCTIONS CONCRETE PURLIN BRACKET
CONCRETE PURLIN BRACKET VERSION MARCH 2015 GENERAL INSTRUCTIONS Safety: Systems may only be installed and operated by properly trained and technically suitable people (i.e. MCS accredited installers).
More informationInstallation manual for sloped roof assembly system. Jurchen Technology GmbH Prinz-Ludwig-Straße Helmstadt
Installation manual for sloped Jurchen Technology GmbH Prinz-Ludwig-Straße 5 9764 Helmstadt Index. Security note.... Hazard note.... Planning and installation notes.... Installation notes... 4. Outline
More informationPUSH-PULL-PROPS. and accessories ROBUSTA-GAUKEL GMBH MOUNTING TECHNOLOGY &CO.KG
PUSH-PULL-PROPS and accessories MOUNTING TECHNOLOGY ROBUSTA-GAUKEL GMBH &CO.KG MOUNTING TECHNOLOGY PUSH-PULL-PROPS AND ACCESSORIES INDEX General information...................... 3 Push-pull-prop Type
More information1 Fastening elements Roof hooks 3 Fastening on corrugated roofs 9 Standing seam clamps 11 StandOff 14 FixE / FixT 15
Schletter Solar Mounting Systems Components overview 2011 Contents Page 1 Fastening elements Roof hooks 3 Fastening on corrugated roofs 9 Standing seam clamps 11 StandOff 14 FixE / FixT 15 2 Module clamps
More informationInstallation Instructions
Installation Instructions SOLC 220 SOLC 220 PAG SOLC 220 PAE SOLC 220 BAG SOLC 220 BAE Flat plate collector Basic kit Frankfurt tile Extension kit Frankfurt tile Basic kit plain tile Extension kit plain
More informationMANUAL MOUNTING SYSTEM FOR CORRUGATED ROOF
MANUAL MOUNTING SYSTEM FOR CORRUGATED ROOF EN mounting system for corrugated roof for solar panels in portait setup (cross-system) ESDEC BV 2015 TABLE OF CONTENT 1. Introduction 1 2. General installation
More informationInstallation Instructions
Installation Instructions Alpha SolarSmart On Roof Kits for the Installation of Alpha Solar Collectors onto Tile and Slate Type Roofs For Technical help or for Service call... ALPHA HELPLINE Tel: 0 77
More informationWPS crew Doors Installation instructions
WPS-132-133 crew Doors Installation instructions ORDER OF INSTALLATION FOR A COMPLETE ENCLOSURE OF A CREW WPS (Weather Protection System) IS AS FOLLOWS: 1. Heater 2. Rear Thresholds - Right Hand & Left
More informationSpecifications. Area of use In-roof and on-roof mounting tiles, plain tiles, slate, Spanish tiles, tin roofing and as a freestanding unit
Product description FM modular collector It can be installed both horizontally and vertically. Suitable mounting systems are available for various types of roofing or with weather-resistant frames for
More informationorientation Conergy SunTop Instructions for professional installation
On-roof Framed modules Portrait orientation Landscape Three-tab Shingle Plain tile Slate Double Roman tile Metal roof Material warranty orientation Conergy SunTop Instructions for professional installation
More informationINSTALLATION GUIDE SM SOLAR MOUNT PUB15JAN01
MOUNT INSTALLATION GUIDE PUB5JAN0 SM SOLAR Wrenches and Torque Wrench Size Recommended Torque (ft-lbs) /4 Hardware 7/6 *0 3/8 Hardware 9/6 *30 # Hardware 5/6 0 Torques are not designed for use with wood
More informationSchletter solar mounting systems Components overview
Schletter solar mounting systems Components overview CONTENT PAGE 1 Fixation elements Roof hooks 3 Corrugated roof fixations 7 Standing seam clamps 9 Standoff 11 FixE / FixT 12 2 Module clamps For framed
More informationSport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed
Assembly instructions Art.-Nr.: 201 0915 203 4502 Sport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed 0218214 2018 Sport-Thieme GmbH D-38367 Grasleben Germany sport-thieme.com info @sport-thieme.com
More informationSystem 3000 specifications
System 3000 specifications Scope: Materials: Type of Bookstack: This specification covers delivery and installation of steel library shelving of the bracket type. Height, depth and accessories shall be
More informationAssembly Instructions
Unite Panel System Hinge Door July 2016 #12 x / slotted hex washer head bolt Figure 1 threshold bracket frame Detail F threshold bracket threshold bracket (installed) #12 x / slotted hex washer head bolt
More informationMANUAL MOUNTING SYSTEM FOR BITUMEN / EPDM
MANUAL MOUNTING SYSTEM FOR BITUMEN / EPDM EN mounting system for insulated pitched roof Bitumen / EPDM for solar panels landscape setup ESDEC BV 2015 TABLE OF CONTENT 1. Introduction 1 2. General installation
More informationMEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
More informationSolar Competence. ALUMERO Metal Components Assembly Instruction for Solar Mounting System DT-1. Systematic Solutions
Solar Competence ALUMERO Metal Components Assembly Instruction for Solar Mounting System DT-1 ALUMERO GROUP Your big advantage! + In-house consulting and design office 4 ) Lap-joint sheet covered roof
More informationFEET, WHEELS, FLOOR FASTENINGS, SUPPORTS
SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT
More informationInstallation Guide Simplicity Alfresco. V1.9 Lu070318
0333 305 5272 www.canoports.co.uk Installation Guide Simplicity Alfresco V1.9 Lu070318 Tools Required Below is a list of tools that you will require to install your the Simplicity Alfresco System. Cordless
More informationRoof Attachment Overview
Roof Attachment Overview MY STORY Brandon Gwinner Account Executive OUR RACKING SOLUTIONS - Construction and Sales for over 15 years - SunModo brand representative for over 5 years - OSEIA board of Directors
More informationAlpha + On-Roof System Installation manual
810-0116 Alpha + On-Roof System Installation manual Content Alpha + A stroke of genius with a plus 1 Introduction 2 1.1 Short Description 2 1.2 About These Instructions 2 1.3 Warnings 3 1.4 Safety 3 2
More informationNEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
More informationINSTALLATION GUIDE SM SOLAR MOUNT PUB15JUN15
MOUNT INSTALLATION GUIDE PUB5JUN5 Wrenches and Torque SM SOLAR Wrench Size Recommended Torque (ft-lbs) /4 Hardware 7/6 *0 3/8 Hardware 9/6 *30 # Hardware 5/6 0 Torques are not designed for use with wood
More informationEnclosures, guards and partitions 6. Clamp Profiles Hangers Dual-Rod Mesh Hanger Lifting-Door System Door Security
Clamp Profiles Hangers Dual-Rod Mesh Hanger Lifting-Door System Door Security Application example system solutions for enclosures and guards Components for building enclosures and guards 1 2 3 4 5 7 194
More informationfischer Solar-fix Mounting system for photovoltaic and solar thermal panels
fischer Solar-fix Mounting system for photovoltaic and solar thermal panels Mounting system For photovoltaic and solar thermal panels A new way the sun s Mounting system 2 Suitable for pitched roofs Suitable
More informationInterior Equipment/Shop Fittings
Interior Equipment/ Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Hook-in profile Eilox SHOPTEC Shopfitting system Wall channel Bracket Column Accessories
More informationBuilding Attached PV Applications (BAPV) Tile-on Roof System Metal Sheet Roof System Flat Roof System Windstream System
Building Attached PV Applications (BAPV) Tile-on Roof System Metal Sheet Roof System Flat Roof System Windstream System Tile-on Roof System Optimized design with wide range of usage, easy installation.
More informationMaterial Packing Brown Grey Pine Black White
RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24
More informationPricelist - K2 mounting system
Pricelist - K2 mounting system Prices do not include VAT and shipping costs. Please send us photos of your roof, scheme of module arrangement and fill in this questionaire: www.solarity.cz/email/file/flat_roof.pdf
More informationPiazzola Pergola Awning Manufacturing and installation guide
Piazzola Pergola Awning Manufacturing and installation guide Date Changes Page General information Maximum and minimum width Width Projection 150 to 349 cm 350 to 500 cm From 200 to 250 cm X From 251 to
More informationSTANDARD GRAVITY BOX TARP INSTALLATION
OPERATORS MANUAL Rev. 9.9.2016 STANDARD GRAVITY BOX TARP INSTALLATION J. & M. Mfg. Co., Inc. 284 Railroad Street - P.O. Box 547 Fort Recovery, OH 45846 Ph: (419) 375-2376 Fax: (419) 375-2708 www.jm-inc.com
More informationInstallation Instructions
Installation Instructions Roof edge trim profile Series TAG multi-piece aluminium profile Front face height: 250-1050 mm supplied with patented 4F brackets as standard height-adjustable, horizontally moveable,
More informationFront axle components, overview
j a t Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved, or
More informationGSE INTEGRATION INSTALLATION MANUAL For photo-voltaic systems partially covering the roof
GSE INTEGRATION INSTALLATION MANUAL For photo-voltaic systems partially covering the roof V 7.5 WWW.GSEINTEGRATION.COM Contents STEP BY STEP Presentation of system p.4 Contents of kit p.5 GSE Integration
More informationSolarMount (E)volution
SolarMount (E)volution SOLARMOUNT (E)VOLUTION: THE BEST JUST GOT BETTER. Engineering, Excellence, and Ease. Performance Engineered for versatility and reduced installation time, SolarMount (E)volution
More informationASSEMBLY INSTRUCTIONS. Construction type approved Reg. no S819 F ENERGY AND SANITARY SYSTEMS
Heliostar 252 S4 and 218 S4 FREE-STANDING INSTALLATION vertical ASSEMBLY INSTRUCTIONS Construction type approved Reg. no. 011-7S819 F ENERGY AND SANITARY SYSTEMS Safety instructions Safety instructions
More informationFS Uno mounting instructions. 2 Pile driving (Ramming) 5. 6 Components list Torque specifications 15
FS Uno System Mounting instructions CONTTS Page 1 General - Safety, planning and tools 2 2 Pile driving (Ramming) 5 3 Rack overview - Components and fasteners 6 4 Mounting of the individual assembly groups
More informationProducts for fixing to Steelwork and Decking
Products 8.0 Beam Clamp - Single Support 8.1 Universal Joint for any variable Angle Adjustment 8.2 Beam Clamp TCS for Header Rails 8.3 Beam Clip for Cross Support/ Dimensioning of Bolts 8.4 Beam Clip for
More informationManufacturing and installation instruction. Solidare Verso. Pergola awning (bottom mounted)
Manufacturing and installation instruction Solidare Verso Pergola awning (bottom mounted) Solidare Verso pergola awning 11-05-2017 * * A T T E N T I O N * * AVZ accepts no liability for any errors in this
More informationPOOL ENCLOSURES LEIA & ALVA. Assembly manual
POOL ENCLOSURES LEIA & ALVA Assembly manual Rev. 07.2017 PARTS LIST Parts for rail installation: Rail Síncsavar screw 1 Plastic Síncsavar anchor 10 50 2 Rail Síncsavar connector 3 Arrest Síncsavar wedge
More informationGeneral information. Materials: Roof hooks and their main components: high-grade (stainless) steel or aluminum;
COMPONENT OVERVIEW 2018/2019 General information Materials: Roof hooks and their main components: high-grade (stainless) steel 1.4301 or aluminum; Screws/bolts: high-grade (stainless) steel A2 or better
More informationOrganisational Kitchen Fittings Kitchen Cabinet Accessories
Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic
More informationInstallation manual. novotegra for tiled roofs
Installation manual novotegra for tiled roofs I TABLE OF CONTENTS 1 Information... 1 2 Installation system maintenance... 3 3 novotegra for tiled roofs... 3 4 System components, tools and work equipment...
More informationGMS FLEX. / Versatile mounting system for open-terrain PV power plants / Adaptable to terrain: Variable module tilt angle and lateral tilt, various
GMS FLEX Adjustable and flexible as the nature / Versatile mounting system for open-terrain PV power plants / Adaptable to terrain: Variable module tilt angle and lateral tilt, various foundation types
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationInstallation Guide Contemporary Alfresco V1.3 LU
Installation Guide Contemporary Alfresco V1.3 LU 010818 Tools Required Below is a list of tools that you will require to install you're the Contemporary Alfresco System. Cordless Drill Mastic Gun Spirit
More information6 1/2 x 6 1/2 Wood Grain Flat Top Pergola
/ x / Wood Grain Flat Top Pergola A S S E M B LY G U I D E Models: Lakewood OPTIONAL ACCESSORY Bolt Down Bracket Kit V.-09 Ta b l e o f Co n t e n t s The PAGE Introduction & Overview.......................................................
More informationSection 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie .
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS Web. acrylicdesign.ie Email. sales@acrylicdesign.ie Acrylic Design 2004-2015 Mobile Cable System Components Single panel clamp Stand Off for
More informationInstallation of HORIZONT and HORIZONT HIGH pool enclosures
Installation of HORIZONT and HORIZONT HIGH pool enclosures Rev. 19.10.2017 PARTS LIST Parts for rail installation: Rail screw 6 x 60 Plastic anchor 10 x 50 Rail connector Arrest wedge [R-L] Pop rivet 4
More informationGlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationSport-Thieme. Handball Goal. Assembly instruction. 3x2 m, Free-standing with Fixed Net Brackets
Assembly instruction Sport-Thieme Handball Goal Cat.-no.: 115 0953 2392905 239 2918 113 6500 239 2400 239 2413 3x2 m, Free-standing with Fixed Net Brackets Thanks for choosing Sport-Thieme equipment! In
More information1 Fastening elements Roof hooks 3 Fastening on corrugated roofs 10 Standing seam clamps 12 StandOff 15 FixE, FixT 16
Schletter Solar Mounting Systems Component Overview 2011 CONTENTS PAGE 1 Fastening elements Roof hooks 3 Fastening on corrugated roofs 10 Standing seam clamps 12 StandOff 15 FixE, FixT 16 2 Module clamps
More informationAWNING SYSTEM INSTALLATION INSTRUCTIONS ALL VERTICAL WALLS
INSTALLATION MANUAL AWNING SYSTEM INSTALLATION INSTRUCTIONS ALL VERTICAL WALLS TABLE OF CONTENTS Table of Contents... 3 Components... 4 System Components... 6 Attachment Components... 7 Module Compatibility...
More informationInstallation manual. IBC TopFix 200. Version 18.01, as of: 1-Mar-2018
Installation manual IBC TopFix 200 1 Dear customer, Congratulations, you have chosen an IBC product! Experience for yourself the quality and reliability of the IBC TopFix 200 module mounting system. To
More informationGIRTS ON BACK OF BUILDING
GIRTS ON BACK OF BUILDING ALL GIRTS ARE 1 1/2 SQUARE TUBE. GIRT LENGTHS FOR 12, 20, 24, AND 30 WIDE BUILDINGS: ON 12 WIDE BUILDINGS GIRTS ARE 67 3/4 LONG ON 20 WIDE BUILDINGS GIRTS ARE 56 3/4 LONG ON 24
More informationRoof Mount Ground Mount Specialised Clamps Spares Application Notes
DPA Solar Racking Solutions Solar PV Racking Catalogue Roof Mount Ground Mount Specialised Clamps Spares Application Notes www.dpasolar.com.au 1300 447 500 Rails & Splices Page 3 Mid & End Clamps Page
More information6 1/2 x 6 1/2 Wood Grain Flat Top Pergola
/ x / Wood Grain Flat Top Pergola A S S E M B LY G U I D E Models: Lakewood OPTIONAL ACCESSORY Bolt Down Bracket Kit V.- Ta b l e o f Co n t e n t s The PAGE Introduction & Overview.......................................................
More informationItem Checklist & Additional Tools Required For Installation
Product Manual Item Checklist & Additional Tools Required For Installation Included Parts: Qty: 1 Maestro BAL Ventilator 1 2 Speed Controller 1 3 Power Supply 1 4 Fixing Strap 1 5 Speed Controller Fixing
More informationDUTCH GABLE FREESTANDING CARPORT
DUTCH GABLE FREESTANDING CARPORT STRATCO OUTBACK ASSEMBLY INSTRUCTIONS. Your complete guide to building a FREESTANDING Outback DUTCH GABLE CARPORT BEFORE YOU START Carefully read these instructions. If
More informationSecuAnch Roof Anchor System
Height Safety Products Email: marketing@fallprotec.com SecuAnch Roof Anchor System 1 Presentation The SecuAnch lifeline is designed to be permanently installed on buildings and other structures where maintenance
More informationSport-Thieme. Full-Size Goal. Assembly instructions. 7,32x2,44 m, Portable
Assembly instructions Sport-Thieme 7,32x2,44 m, Portable Art.-Nr.: 115 0793 257 7207 Full-Size Goal 0218214 2018 Sport-Thieme GmbH D-38367 Grasleben Germany sport-thieme.com info @sport-thieme.com Phone:
More informationExperience the Hi-Lite Advantage
Experience the Hi-Lite Advantage 12K Aluminum Shoring System INTRODUCTION The 12K Shoring System is primarily a hand-set system. It can also be handled with a crane, and may also be used quite successfully
More informationInstallation instructions Vacuum tube collector CRK-12
Installation instructions Vacuum tube collector CRK-12 Wolf GmbH Postfach 1380 D-84048 Mainburg Tel. +49 8751/74-0 Fax +49 8751/741600 Internet: www.wolf-heiztechnik.de 30 62 290 04/08 GB Index 1. General
More informationInstallation Manual. This installation is for the Odyssey H1800 Series Ventilation System.
Installation Manual This installation is for the Odyssey H1800 Series Ventilation System. This installation is limited to roofs with pitches between 3 and 35. This instruction assumes that there is a power
More informationInstallation instructions for heating engineers. Vitosol 200 Type D10, D20 and D30 Direct flow vacuum tube collector VITOSOL 200
Installation instructions for heating engineers Vitosol 200 Type D10, D20 and D30 Direct flow vacuum tube collector VITOSOL 200 4/2004 Safety instructions Please follow these safety instructions closely
More information1 of 9 SITE PLAN modules at 325W kw. Sample GAMECHANGE SOLAR. Sample. Sample AERIAL VIEW. Array Information. Design Information.
AERIAL VIEW Array Information PV Modules Racking Manufacturer Hyundai Gamechange Racking Model HiS-S325TI 5-Degree GC Grid-Lite Dimensions." x 39.29" x.9" Weight 5. lbs Quantity 224 224 modules at 325W
More informationInstallation. ng Kitt
Installation Instructions Alpha SolarSmart 100 Roof Integrated Flashi ng Kitt for the Installation of Alpha Solar Collectors into Tiled Roofs 1 Integrated Flashing kit for Alpha SolarSmart 1000 CONTENTS
More informationFABA. Installation Instructions. Conductor Bar System. Publication #FABA-03 3/1/04 Part Number: Copyright 2004 Electromotive Systems
FABA Conductor Bar System Installation Instructions Publication #FABA-03 3/1/04 Part Number: 005-1062 Copyright 2004 Electromotive Systems 1S 100 Z Installation Instructions Contents: Basic Diagram - -
More informationGEZE SLIDING DOOR SYSTEMS
GEZE Perlan 140 Multi-faceted uses with individual accessories The discrete design supports every required room effect and makes the sliding door system with its accessories a guarantee for elegant and
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE STEEL LINE
PLUS 30 for cable carriers Support trays page 304 PLUS Guide channels page 305 RCC Rail Cable Carrier page 309 ECC Emergency Cable Carrier page 30 Strain relief devices page 3 Assembly profile bars page
More informationinstallation instructions WC Frame 1180mm with Dual Flush Cistern
installation instructions WC Frame 1180mm with Dual Flush Cistern (C,D,E) K F/G N L M 12 13 14 16 1 2 11 A 5 6 Q O Y 3 C 10 E D B P,Z,AA R T V S 4 U 2 No. Part no. Description Quantity A WC Frame with
More informationOceanside Outdoor Vinyl Shower Kit (3 x 3 Enclosure)
Oceanside Outdoor Vinyl Shower Kit ( x Enclosure) A B ASSEMBLY GUIDE REQUIRED FOR INSTALLATION (A) Zippity Post Extension for In-Ground Installation (Sold as 4-Packs) (B) Zippity Galvanized Steel Surface
More information6 1/2 x 6 1/2 Flat Top Pergola
6 / x 6 / Flat Top Pergola A S S E M B L Y G U I D E Models: Portland, Liberty O P T I O N A L A C C E S S O R Y Bolt Down Bracket Kit V.-0506 Ta b l e o f Co n t e n t s PAGE The Introduction & Overview......................................................
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationGlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationEzQuikTM. MicroSolar System EzQuik TM Aluminum Solar PV Module Mounting System. Code-Compliant Installation Manual V1011 (AS/NZ1170) Model 2012
TM Model 2012 Code-Compliant Installation Manual V1011 (AS/NZ1170) MicroSolar System TM Aluminum Solar PV Module Mounting System 1 CONTENTS SECTION 1 INTRODUCTION... 3 1.1... 3 1.2 Why?... 3 1.3 Before
More informationInstallation Guide. Step 3. Valley Flashing. Step 7. Transition Flashings and Accessories. Step 6. Hip and Ridge Installation
Step 7. Transition s and Accessories Step 3. Valley Step 6. Hip and Ridge Installation Step 2. Rake Trim Step 5. Installing the Shingles Step 1. Eave Starter Installation Step 4. Endwall s Installation
More informationHeavy duty profiles. Heavy loads with maximum stability. Profile general overview... p Heavy duty profiles... S Load data... p.
Heavy loads with maximum stability Profile general overview... p. 366 Heavy duty profiles... S. 368 Load data... p. 372 Connection techniques... p. 374 Accessories... p. 384 Heavy duty profiles 365 Heavy
More informationFASTENERS. Fasteners. Steel fasteners. Hexagon socket screws. Steel fasteners MC6S
Steel fasteners 21 FASTENERS Steel fasteners Hexagon socket s MC6S Hexagon socket head cap Din 912. (ISO 4762). * Fully threaded. 100 101 102 12.9 Uncoated 8.8 Uncoated 8.8 BZP Blanc Zink plated Dim mm
More informationPatented Rail-Free Mounting System for Composition/Asphalt Shingle Roofs
Quick Start Guide Patented Rail-Free Mounting System for Composition/Asphalt Shingle Roofs R ESPECT T HE R OOF Quick Rack Components & Tools Components are pre-assembled and ready for installation right
More informationService installation of hardtop Installing hardtop
Service installation of hardtop Installing hardtop â Lower side windows as far as they will go. â Retract (if necessary unscrew) radio aerial. â Switch off ignition. â If necessary, remove wind deflector.
More information10 x 10 Flat Top Two Tone Pergola
0 x 0 Flat Top Two Tone Pergola Models: Bordeaux ASSEMBLY GUIDE OPTIONAL ACCESSORIES Arch Kit System ( Arches) Privacy Fence Panel System ( Panels & Middle Post) Bolt Down Bracket Kit ( for Pergola) Ver.0-00
More informationEJOT Solar fastenings. For fastening of uprights for solar and photovoltaic installations
EJOT Solar fastenings For fastening of uprights for solar and photovoltaic installations Imprint Editor: EJOT Baubefestigungen GmbH D 57334 Bad Laasphe Germany Layout and Realisation: EJOT Baubefestigungen
More informationKwik-Lock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 Installation Instructions Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com
More information