Organisational Kitchen Fittings Kitchen Cabinet Accessories

Size: px
Start display at page:

Download "Organisational Kitchen Fittings Kitchen Cabinet Accessories"

Transcription

1 Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic coated white Bin: Light grey plastic Lid: White plastic Housig: Stainless steel Bin: Light grey plastic Lid: White plastic Single waste bin, capacity 20 litres Finish: Galvanized bin is fire-retardant Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side and front panel Housing: Stainless steel Bin: Steel galvanized Lid: Aluminium polished Housing: Steel, plastic coated white Bin: Dark grey plastic Lid: Aluminium polished Double waste bin, capacity 2 x 1 litres Carcase width: Min. 300 mm Type of pull-out: Full extension (manual) Installation: Screw fixing to bottom Bracket: Steel plastic coated grey Bin and lid: Plastic grey Double waste bin, capacity 1 x 19 and 1 x 30 litres Carcase width: Min. 00 mm Type of pull-out: Full extension (manual) Installation: Screw fixing to bottom Frame: Steel Bin and lid: Plastic grey SEA.47

2 Accessories for waste bins with hinged doors Door opener set Spring-rolling element Kick touch plate Opposite plate Area of application: To open the door of the waste bin with the foot Material: Kick touch plate and spring-rolling element plastic, opposite plate steel Finish: Kickplate black, spring-rolling element white, opposite plate black lacquered Basement high: Min. 100 mm Function Kick touch plate Spring-rolling element, closed door Spring-rolling element, opend door Double waste bin, capacity 1 x 1 and 1 x 8 litres Carcase width: Min. 300 mm : Runners for extension base are not included Installation: Screw fixing to extension base Bracket: Steel powder coated grey Bin and lid: Plastic grey Order reference Please order GRASS NOVA PRO runners separately SEA.48

3 Triple waste bin, capacity 1 x 22 and 2 x 10 litres Carcase width: 600 mm Type of pull-out: Full extension with soft close device Installation: Screw fixing to side panel with easy fixing device : With pull-out cover shelf Supplied with: Fixing material Bracket and housing: Steel powder coated grey Lid: Plastic grey The smart solution for a clean waste disposal: Front pull-out system for waste separation available in two different heights. Note Very easy and fast installation with a template jig. No measurements to make for the runner. Application and installation The pull-out with damping guarantees gentle and soft closing. As an important requisite for hygienic waste disposal, the double powdercoated metal lid ensures long lasting protection against damages. SEA.49

4 Wine rack Material: Steel Finish: Silver coloured coated Installation: Screw fixing to panel Dim. (W x D x H) Number of levels Number of bottles 260 x 18 x 490 mm x 18 x 624 mm Towel rail with extending runner, 1 or 2 arms Material: With steel runner and plastic cover Finish: Chrome plated rods and cover, galvanized runner : Extending Runner length: 260 mm Extension length: 16 mm Fitting: For left and right hand use Installation: 1-Arm holder for top or lateral screw fixing, 2-Arm holder for lateral screw fixing Length 1 Arm 32 mm mm Arm 32 mm mm Arm 2 Arm SEA.0

5 IRONFIX Ironing board for drawer mounting Inside width mm Fit into a cupboard drawer for optimum space savings Infinitely variable width adjustment for built-in widths between 362 and 00 mm Inside cupboard depth 00 mm Integrated spring mechanism Hinging front section permits trousers, shirts to be pulled easily over the board Hard-wearing finish all hardware components made of powder-coated metal Automatically extending support for the ironing surface when the drawer is opened Operating and assembly instructions are included with every ironing board Finish: Steel, powder-coated, white RAL 9016; fabric ironing board cover in striped design Cupboard inside depth 00 mm If you require the ironing board to be at the same height as the worktop, observe the following dimensions: Dim. D 20 mm 30 mm 40 mm 0 mm Dim. E 86 mm 76 mm 66 mm 6 mm SEA.1

6 IRONFIX Ironing board for wall mounting Easy to mount on walls Completely assembled Can be folded out for use Equipped with turning mechanism Can be turned steplessly to the left or to the right up to 90 Can be locked in the left, right and inclined position Operating and assembly instructions are included with every ironing board Finish: Steel, powder-coated, white RAL 9016; fabric ironing board cover in striped design Front Cover: Slightly structured surface Finish: Polystyrene, white RAL 9016 Without cover hood With cover hood Installation Cover hood Accessories for ironing board IRONFIX Iron cloth for ironing board Ironfix Material: Cotton with foam on back Finish: Natural white with grey stribes : With elastic band SEA.2

7 Folding steps Material: Steel : With 2 steps 200 x 300 mm and non slip rubber threads Colour Silver/black White/grey Folding bracket Area of application: For attaching to the folding steps Installation: The folding bracket is fitted with mounting plates for fastening a baseboard Material Steel Hanging bracket Hanging bracket Finish: White plastic coated Size (W x D x H): 140 x 30 x 30 mm Material Steel SEA.3

8 Drag hinge for refrigerator door panel Area of application: For connecting built-in refrigerator door to cabinet door panel Material: Plastic Colour: Brown Packing: 1pc Supplied with 4 Fixing screws Note Please check with manufacturer that your refrigerator is available or not. Dimension Installation Attach the guide to the outer side of the refrigerator door. Open the refrigerator door to 90 and insert the rail into the guide. Now screw on the rail perfectly level to the inner side of the cabinet door. Max. 8 Depending on the size of appliance door either one or two fittings may be inquired. SEA.4

9 Cabinet hanger Knock-in version, load bearing capacity 130 kg/pair Depth adjustment Material: Steel Finish: Galvanized Concealed mounting of cabinet hanger behind the rear panel (Min. 16 mm free space required) Mounting Right Left Packing: 1pc Vertical adjustment 17 mm Screw-in version, load bearing capacity 130 kg/pair Depth adjustment Material: Steel Finish: Galvanized Concealed mounting of cabinet hanger behind the rear panel (Min. 16 mm free space required) Cabinet hanger for screw fixing Packing: 1 or 100 pcs. Vertical adjustment 17 mm Cover cap for cabinet hanger Nickel plated Cream Installation: Plug-in to Ø 18 mm hole in front of rear panel Material Plastic cream, RAL Plastic nickel plated Packing: 1 or 100 pcs. SEA.

10 Cabinet hanger screw-on version 13 mm 17 mm Screw-in version, load bearing capacity 130 kg/pair Material: Plastic Colour: White Vertical adjustment: 13 mm Depth adjustment: 17 mm Lateral adjustment: 8 mm Mounting Right Left Packing: 1pc Cover cap for cabinet hanger Installation: Slide-in Material Left Right Plastic white Plastic brown Plastic grey Plastic oak Plastic nickel Packing: 1pc SEA.6

11 Press fixing, load bearing capacity 10 kg/pair Top panel Material: White plastic Vertical adjustment: 12 mm Depth adjustment: 14 mm Lateral adjustment: 12 mm Side Rear panel Mounting Right Left Packing: 1 or 0 pc. Top panel Carcase side panel Rear panel Screw fixing, load bearing capacity 10 kg/pair Top panel Material: White plastic Vertical adjustment: 12 mm Depth adjustment: 14 mm Lateral adjustment: 12 mm Mounting Side Rear panel Right Left Packing: 1 or 0 pc. Top panel Carcase side panel Rear panel Screw fixing, load bearing capacity 10 kg/pair Top panel Side Rear panel Top panel Carcase side panel Material: White plastic Vertical adjustment: 16 mm Depth adjustment: 6 mm Lateral adjustment: mm Mounting Can be used on the left, on the right or in the centre Packing: 1 or 0 pc. SEA.7

12 Wall rail for cabinet hanger Material: Steel Finish: Galvanized Installation: Screw fixing Packing: 1, 20 or 20 pcs Material: Steel : Wall rail can be broken in two pieces Installation: Screw fixing Finish Zinc plated SEA.8

13 Adjustable plinth foot, plastic Colour: Black Adjusting range: - to +10 mm Installation: With M10 fixing screw or 3 chipboard screws with countersunk head Ø 3. mm Plinth height For plinth height 80 mm mm mm mm Packing: 1, 100 or 200 pcs. Plinth clip Screw Fixing Groove mounting Material: Plastic Installation Screw fixing Groove mounting Packing: 1, 100 or 00 pcs. M10 x 33 mm fixing screw Material: Steel Finish: Galvanized Length 33 mm Packing: 1 or 100 pcs. Cover cap Adjusting screw with steel foot plate SW 17 hexagon Material: Plastic Colour: White Diameter 24 mm Packing: 1, 100 or 1,000 pcs. Material: Plastic glide Finish/Colour: Nickel plated, glide black Installation: With M10 screw, steel galvanized Thread length 20 mm Packing: 1 or 100 pcs. SEA.9

14 Adjustable plinth foot, plastic Colour: Black : Square or triangular glide Adjusting range: -10 to +18 mm Installation: Press fitting or screw fixing With square mounting plate Drilling dimensions For socket height 60 mm For socket height mm Supplied with 1 Mounting plate 1 Tube 1 Adjustable foot Mounting height Press fitting Screw fixing 60 mm mm mm mm mm mm Packing: 1 or 20 pcs. Plinth panel clip with panel holder Installation Knocking-in with 2 pre-mounted nails Disassembly ring Press fitting into groove Material: Plastic Colour: Black Installation For rectangular glide For triangular glide Knocking-in Press fitting Packing: 1 or 20 pcs. Material: Plastic Colour: Natural coloured Installation Clamping on Packing: 1 or 100 pcs. SEA.60

15 Adjustable plinth set for extending side panel Material: Plastic mounting plate, connecting piece and adjustable foot, steel counterplate and screw Finish/Colour: Mounting plate, connecting piece and adjustable foot black Height adjustment: 28 mm Supplied with 1 Mounting plate 1 Connecting piece 1 Adjustable foot with M8 screw 1 Counterplate Installation Adjustable plinth set Mounting plate Rectangular Triangular Press fitting Screw fixing Packing: 1 or 20 pcs. Felt, height 10 mm Area of application: For plain floors, e. g. for stone floors, floors made of PVC Material: Felt glide cotted with plastic base element Colour: Base element natural coloured, glide grey Diameter 20 mm mm mm Packing: 100 or 1,000 pcs. SEA.61

16 Adjusting screw with M10 thread Drive: SW 4 hexagon socket or slot recess : With swivelling base plate Length L Hexagon socket Slot recess 60 mm mm mm mm mm mm Packing: 100,10 or 200 pcs. Protective cap for adjusting screw with M10 thread Material: Plastic Colour: Transparent Installation Pushing onto base plate Packing: 1, 100 or 00 pcs. Fixing elements with M10 internal thread Finish: Galvanized screw on bracket and plate, bright knock-in T-nut and screw in socket Screw on bracket Screw on bracket Packing: 1 or 100 pcs. Screw on plate Knock-in T-nut Screw in socket Screw on plate Packing: 1 or 100 pcs. Knock-in T-nut Packing: 1 or 00 pcs. Screw in socket Packing: 100 or 00 pcs. SEA.62

17 Wall sealing profile Profile strip, two-piece Material: Plastic, aluminium inset : 2-Piece (base profile and cover), with 2-way seal, with protective film Base profile installation: Screw fixing Cover installation: Clipping onto base profile Heat resistant Finish White Silver coloured (light grey) Black Light oak Beech Packing: m End cap Material: Plastic Finish Left Right White Aluminium coloured Light grey Brown Black Internal corner Material: Plastic External corner Finish White Aluminium coloured Light grey Brown Black Material: Plastic Finish Angle 90 Angle 13 White Aluminium coloured Light grey Brown Black SEA.63

18 Kitchen Interior Fitting Systems Steel railing system Material: Steel rail, zinc alloy holder Finish: Rail and holder chrome polished : Items can be individual positioned on the rail Diameter: Ø 16 mm Length 600 mm ,200 mm Packing: 1 set Supplied with 1 Rail 2 End caps 2 Tube holder 1 Set of fixing material Functional support columns Material: Tube: Steel, Different elements: Steel, wood, particle board, glass Finish: Tube chrome polished or chrome matt Different elements chrome polished, chrome matt, lacquered or plastic coated : Individual arrangable, elements can be adjusted to every requested high SEA.64

19 Kitchen Interior Fitting Systems Steel railing system Material: Steel Finish: Chrome polished Spice holder shelf Paper roll holder Paper roll holder Shelf rack : Spice vessel with white plastic cap 1 Set of vessel Vessel Shelf rack Glass holder A B C A S-hook B Butcher s hook C Double hock SEA.6

20 Kitchen Interior Fitting Systems Steel railing system Material: Steel Finish: Chrome polished Cocking book holder Utensil holder Dimension: 30 x 100 x 230 mm Narrow double shelf Dimension: 18 x 27 x 78 mm Wide shelf Dimension: 33 x 10 x 240 mm Paper roll holder Dimension: 280 x 181 x 100 mm Wide shelf SEA.66

21 Kitchen Interior Fitting Systems Stainless steel railing system Shelf rack Shelf rack Dimension: 40 x mm Dimension: 40 x 182 x 280 mm Dimension: 470 x 20 x 24 mm Shelf rack Dimension: 620 x 2 x 320 mm Multiple purpose rack Multiple purpose rack Cutlery holder Dimension: 230 x 12 x 436 mm Dimension: 320 x 2 x 720 mm Dimension: 26 x 120 x 480 mm Knife rack Dimension: 30 x 86 x 206 mm Towel and Foil holder hooks rack SEA.67

22 Kitchen Interior Fitting Systems Drip off rack set Material: Drip of rack stainless steel, side panel bracket plastic Finish: Side panel bracket grey Width Depth 414 mm 240 mm mm mm mm Packing: 1 set Supplied with 1 Flat drip off rack 1 Deep drip off rack 4 Side panel brackets Drip off sheet Example of use Material: Stainless steel Width Depth 370 mm 240 mm mm mm mm Glass shelf support Material: Steel and zinc alloy carrier Finish: Carrier stainless steel look Packing: 1 pair Supplied with 2 glass shelf carrier 1 installation manual SEA.68

23 Kitchen Interior Fitting Systems The Definition of Perfect Kitchen Design Häfele home appliance range are creating a new simply practical and logical solution improving performance and standard living. Note For more information please contact our sales department or visit us in our Häfele showrooms! SEA.69

Kitchen Fittings Hanging Cabinets and Accessories

Kitchen Fittings Hanging Cabinets and Accessories Cabinet hanger Knock-in version, load bearing capacity 130 kg/pair Depth adjustment Finish: Galvanized Concealed mounting of cabinet hanger behind the rear panel (Min. 16 mm free space required) Mounting

More information

Table and Furniture Base Fittings Plinth Adjusting Fittings

Table and Furniture Base Fittings Plinth Adjusting Fittings Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.

More information

ACCESSORIES RETAIL PRICELIST

ACCESSORIES RETAIL PRICELIST ACCESSORIES RETAIL LIST APRIL 005 Prices include VAT 016 776700 Retail Pricelist prices include VAT CAROUSELS Corner carousel DESCRIPTION K115 K116M Wall mounted carousel unit with ribbed aluminium curved

More information

Interior Equipment/Shop Fittings

Interior Equipment/Shop Fittings Interior Equipment/ Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Hook-in profile Eilox SHOPTEC Shopfitting system Wall channel Bracket Column Accessories

More information

Table and Furniture Base Fittings Table Legs and Table Bases

Table and Furniture Base Fittings Table Legs and Table Bases Square Stainless steel coloured laquered square Bright laquered square Area of application: For table and coffee tables Material: Plastic glide Finish/Colour: Table leg brushed, glide black Cross section:

More information

MADE IN GERMANY. Developed & Manufactured By. Drawer Runner System.

MADE IN GERMANY. Developed & Manufactured By. Drawer Runner System. MADE IN GERMANY Developed & Manufactured By Drawer Runner System www.hafele.com MADE IN GERMANY Overview BASI SYSTEM Drawer sides with multi-functional benefi ts The Moovit drawer system provides completely

More information

Locks and Catches Catches and Furniture Bolts

Locks and Catches Catches and Furniture Bolts Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701

More information

ATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing.

ATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing. F U R N I T U R E F I T T I N G S M A N U F A C T U R E R Twin-walled seel drawer. Complete Range of concealed runners up to 50 Kilos resistance. indamatic self closing and soft closing. Double wall 405

More information

Material Packing Brown Grey Pine Black White

Material Packing Brown Grey Pine Black White RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24

More information

Interior Equipment, Shop Fittings

Interior Equipment, Shop Fittings Interior Equipment, Häfele, the brand you can trust. The innovator of functionality. Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Eilox SHOPTEC Shopfitting

More information

Connector Technology, Shelf Supports Connection Fittings

Connector Technology, Shelf Supports Connection Fittings MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid

More information

Hinges and Flap Fittings Information

Hinges and Flap Fittings Information Information METALLAMAT Adjustment options Lateral adjustment Adjusting on concealed hinge + mm Height adjustment Via mounting plates adjusting ± 2 mm Depth adjustment Adjusting on concealed hinge + 4 mm,

More information

Furniture Fittings Concealed Hinges

Furniture Fittings Concealed Hinges Blum Clip Top Blumotion, opening angle 110 Material: Steel cup and arm : Screw fixing Installation: Door onto carcase without tools (Clip system) Adjustment: 3 dimensional (with appropriate mounting plate)

More information

FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS

FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories

More information

Technical product descriptions WORKTOPS STANDARD SLIM LINE. 1. Material thickness 38 mm. 2. Core/substrate material Chipboard

Technical product descriptions WORKTOPS STANDARD SLIM LINE. 1. Material thickness 38 mm. 2. Core/substrate material Chipboard Technical product descriptions WORKTOPS I STANDARD 1. 38 mm 2. Chipboard 3. Surface material Laminate (CPL, HPL) 4. Laminate thickness 0,6-0,8 mm 5. Surface structure Wood pore or relief, matt, gloss 6.

More information

Accessories and workbenches

Accessories and workbenches Workbenches To complete the Elabo furnishing systems, we also provide workbenches and organisable steel plate base cabinets. Steel cabinets, shelves and shelf trolleys are available for storage of materials

More information

Door Hinges Drill-in Hinges

Door Hinges Drill-in Hinges Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2

More information

CROWN IMPERIAL ASSEMBLY INSTRUCTIONS

CROWN IMPERIAL ASSEMBLY INSTRUCTIONS CROWN IMPERIAL ASSEMBLY INSTRUCTIONS Standard Drawer Box Page 1 of 14 Standard Drawer Box Parts Parts Supplied B C D A E F G Page 2 of 14 Part Letter Part Name Quantity 300-600 Deep Pan A Base Panel 1

More information

77 cm. 5243/3-GA (3 pcs.) 5243/3-BO (3 pcs.)

77 cm. 5243/3-GA (3 pcs.) 5243/3-BO (3 pcs.) ARCHIMEDE ST.102-4ENG SPECIFICATION Range: ARCHIMEDE Design: Caimi Lab 5203-GA, 5203-BO, 5213-GA, 5213-BO, 5223-GA, 5223-BO, 5233/3-GA, 5233/3-BO, 5241/3-GA, 5241/3-BO, 5243/3-GA, 5243/3-BO, 5245/3-GA,

More information

FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS

FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories and ironmongery

More information

Section 9: Finishing Touches - Other Decor Units

Section 9: Finishing Touches - Other Decor Units Section 9: Finishing Touches - Other Decor Units Butler Sink Units Important: This unit is designed to be used with either This unit is always used between other units. Level the units. Fix together and

More information

Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie .

Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie  . Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS Web. acrylicdesign.ie Email. sales@acrylicdesign.ie Acrylic Design 2004-2015 Mobile Cable System Components Single panel clamp Stand Off for

More information

THE COMPLETE CABINET

THE COMPLETE CABINET THE COMPLETE CABINET ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE WELCOME TO ONE-STOP SHOPPING. THE ONLY ALUMINUM DOOR PROGRAM YOU LL NEED. This is

More information

THE COMPLETE CABINET

THE COMPLETE CABINET THE COMPLETE CABINET ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE WELCOME TO ONE-STOP SHOPPING. THE ONLY ALUMINUM DOOR PROGRAM YOU LL NEED. This is

More information

Accessories > Storage

Accessories > Storage Accessories > Storage Base Larders - Available to suit 150mm, 300mm, & 400mm wide units - Full extension runners with soft close built-in - Heavy grade chrome wirework with bottom shelf container partitions

More information

PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS

PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS PROFILE SYSTEM PRE-ASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS s r ood gni d i l s dna gni t f i l r o f s t neme l e de l bme s s a - er P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS MINITEC

More information

Installation Instructions

Installation Instructions by Plato Woodwork Installation Instructions Plato Woodwork, Inc. 200 Third Street SW P.O. Box 98 Plato, MN 55370 www.platowoodwork.com 800.328.5924 SECTION GUIDE GETTING STARTED PAGE # Installation Methods...

More information

Simplex Baseboard System Baseboard System

Simplex Baseboard System Baseboard System Simplex Baseboard System Baseboard System I Complete installation programme I Trouble-free and time-saving installation I Various connection kits for all types of pipe Our service to you I Simplex Products

More information

Bathroom Installation Manual

Bathroom Installation Manual Bathroom Installation Manual MAKING SPACE MORE VALUABLE May 2016 1 2 Contents page 1. Introduction Page 4 2. Tools required / key Page 5 3. Fittings Page 6 4. 600 cistern unit Page 7 5. 600 vanity unit

More information

System 3000 specifications

System 3000 specifications System 3000 specifications Scope: Materials: Type of Bookstack: This specification covers delivery and installation of steel library shelving of the bracket type. Height, depth and accessories shall be

More information

Utensil sets. 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides. 21" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides

Utensil sets. 15 wide cabinets with 1-1/2 frames and 5/8 thick drawer sides. 21 wide cabinets with 1-1/2 frames and 5/8 thick drawer sides Utensil sets a 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 11-5/8" 6-1/8" 4-1/4" 18" Drawer length ZHI.457FI1A 21" Drawer length ZHI.533FI1A 21" wide cabinets with 1-1/2" frames and

More information

Hardware Bathroom Washroom Handrail Signs. Bathroom Fittings

Hardware Bathroom Washroom Handrail Signs. Bathroom Fittings Bathroom Fittings Hardware Bathroom Washroom Handrail Signs 2 Marine Quality Stainless Steel The high humidity levels in the bathroom setting necessitates the use of a non-corrosive rustresistant. On

More information

www.hafeleindia.com www.hafeleindia.com Silver Gold Rose Gold Graphite Dark Bronze PROFIN : ONE RANGE. MANY SOLUTIONS. 2. Stack Modular Shelving Pg. 23-32 3. Rail Door Profiles Pg. 33-41 1. Gola Profiles

More information

Leveling Feet, Base Plates and Casters

Leveling Feet, Base Plates and Casters Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.

More information

Technical Product Description

Technical Product Description Worktops 5. Thickness material structure Front edge Bottom face coating 40 mm, 50 mm Laminate according to standard: EN 438 Wood pore or relief, matt or gloss 2 x Radius 3 mm, 6 mm or 8 mm depending on

More information

GEZE SLIDING DOOR SYSTEMS

GEZE SLIDING DOOR SYSTEMS GEZE Perlan 140 Multi-faceted uses with individual accessories The discrete design supports every required room effect and makes the sliding door system with its accessories a guarantee for elegant and

More information

Selekta Pro 2000 Fast assembly hinges for office and commercial furniture

Selekta Pro 2000 Fast assembly hinges for office and commercial furniture Fast assembly hinges for office and commercial furniture 99 The program opening angles 180 and 270 with pre-mounted pan-head screws with eccentric height adjustment ± 2 mm with eccentric overlay adjustment

More information

NEWS Part. N /0 MINITEC NEWS

NEWS Part. N /0 MINITEC NEWS NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6

More information

Bathroom Fittings. Hardware Bathroom Washroom Handrail Wardrobe Signs KNUD HOLSCHER H DESIGN

Bathroom Fittings.   Hardware Bathroom Washroom Handrail Wardrobe Signs KNUD HOLSCHER H DESIGN KNUD HOLSCHER H DESIGN www.dline.com Bathroom Fittings Hardware Bathroom Washroom Handrail Wardrobe Signs d line no: 1038-1215 Carl F as, Denmark E-mail: dline@dline.com Internet: www.dline.com Photography:

More information

DISPLAY UNITS (HEATED/CHILLED)

DISPLAY UNITS (HEATED/CHILLED) METALCARRELLI 4 DISPLAY UNITS (HEATED/CHILLED) presentation Having always been present in the HO.RE.CA. sector, we have over time managed to develop a range of products for displaying both heated and chilled

More information

14/08/15 AVAILABLE FROM MIDRAND RANDBURG DURBAN UMHLANGA MARGATE CAPE TOWN GHANA

14/08/15 AVAILABLE FROM MIDRAND RANDBURG DURBAN UMHLANGA MARGATE CAPE TOWN GHANA 4/08/5 AVAILABLE FROM MIDRAND RANDBURG DURBAN UMHLANGA MARGATE CAPE TOWN GHANA PINETOWN BALLITO KRABY DROP DOWN with Kimana Hinges (pg 3) For further information: www.italianaferramenta.com > CATALOGUE

More information

POP PLUS / SPIDER SET-UP INSTRUCTIONS

POP PLUS / SPIDER SET-UP INSTRUCTIONS POP PLUS / SPIDER SET-UP INSTRUCTIONS 1 Place system frame on floor with screws indicating top. Expand upwards & outwards and secure frame connectors. Pop-Up display systems are made to be set-up and taken

More information

Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty.

Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty. Edge Protector Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Size Finish Material Case PX91000N* 1-[½]"L x [⅝]" x [ 9 / 16]" Natural Plastic

More information

Program overview Group 8

Program overview Group 8 Program overview Group.1 Fittings for lightweight boards.1.0 -.1.1.2 Connecting fittings i Range summary.2.1.3 Adjustable fitting for head and foot ends / height adjustable leg / shelf supports / cabinet

More information

MOVEMENT SYSTEMS FITTINGS AND ACCESSORIES

MOVEMENT SYSTEMS FITTINGS AND ACCESSORIES MOVEMENT SYSTEMS FITTINGS AND ACCESSORIES We are where our customers are. Because we see customer proximity as an expression of our company culture. GRASS SOUTH AFRICA This catalogue consists of some products

More information

Company profile WITH EVERY STEP WE MAKE, WE WANT TO KEEP CONTRIBUTING TO OUR GOOD REPUTATION OF A STRONG CZECH MANUFACTURER OF LOCKS AND FITTINGS

Company profile WITH EVERY STEP WE MAKE, WE WANT TO KEEP CONTRIBUTING TO OUR GOOD REPUTATION OF A STRONG CZECH MANUFACTURER OF LOCKS AND FITTINGS Furniture fittings Company profile TOKOZ a.s. is a company working in the field of security mechanisms for more than 90 years. Thanks to years of experience we have become real experts on manufacturing

More information

www.hafeleindia.com www.hafeleindia.com INTRODUCTION Intuitive furniture is the need of the hour. In times like these where every extra square meter is considered as good as gold, installing versatile

More information

Transition Range Installation, Care & Adjustment Instructions

Transition Range Installation, Care & Adjustment Instructions Introduction The following instructions will enable you to complete the final assembly and adjustment of your new furniture. Hardware Box Each of the cabinets contains a Hardware box that contains all

More information

Hardware Fitting Accessories Accessories

Hardware Fitting Accessories Accessories Door viewer Suitable for door thicknesses (a) 34 52 mm Telescopic version Without flap Angle of vision: 160º Door drilling: 12 mm Suitable for door thicknesses (a) 35 78 mm Telescopic version Without flap

More information

FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS

FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT

More information

Malibu - 3 Drawer 2 Door Robe

Malibu - 3 Drawer 2 Door Robe Malibu - 3 Drawer Door Robe ssembly Instructions - Please keep for future reference 7/83 38/3574 58/904 37/187 58/7679 79/1496 6/617 58/803 57/51 79/1960 55/7788 47/766 66/7355 49/661 78/5189 78/0830 Dimensions

More information

ACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports

ACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports ACCESSORIES ACCESSORIES Fasteners PMI has a variety of Fasteners and Connectors for any application. Euro-Bolts, Spiral Cam Connectors, Screws and Sleeves - we have your solution! Shelf Supports Assorted

More information

INFINITE RANGE - CENTRE FOLDING DOOR

INFINITE RANGE - CENTRE FOLDING DOOR INFINITE RANGE - CENTRE FOLDING DOOR CENTRE FOLDING DOOR ONLY ( RECESS) Please read these instructions before installing, as incorrect fitting will invalidate the guarantee-carry out each stage before

More information

Mounting Instructions Item No.: /521/522/420/421/422

Mounting Instructions Item No.: /521/522/420/421/422 Mounting Instructions Item No.: 541.35.520/521/522/420/421/422 Revolving Corner Unit In addition to these general mounting instructions, please refer to the fitting instructions, where the individual drilling

More information

AIR MASTER SYSTEMS INSTALLATION GUIDE TABLE OF CONTENTS

AIR MASTER SYSTEMS INSTALLATION GUIDE TABLE OF CONTENTS AIR MASTER SYSTEMS INSTALLATION GUIDE TABLE OF CONTENTS GENERAL INFORMATION...1 Freight Damage... 1 Repairing Paint Scratches...1 BASE CABINETS... 2 Drawer Removal and Reinstallation...2 Replacing Drawer

More information

Hardware Fitting Accessories Bolts

Hardware Fitting Accessories Bolts Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless

More information

STANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000

STANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000 STANDARD 430E Series Bottom mounted full extension drawer runners Specifications Runner 430E8000 430E7500 430E7000 430E6500 430E6000 430E5500 430E5000 430E4500 430E4000 430E3500 430E3000 430E2500 Nominal

More information

Sliding Door Hardware-Glass Bottom Rolling System

Sliding Door Hardware-Glass Bottom Rolling System Sliding Door Hardware-Glass Silent Aluflex 0 Maximum door weight: 0 kg ( lbs.) Maximum internal height:,500 mm (9 / ) Mullions are recommended for doors taller than 000 mm ( 3/ ) Door width: 500 500 mm

More information

Display/Accessory Furniture

Display/Accessory Furniture 1 Multimedia Display End-of-Range, 60-013-S00 End-of-range displayer has five 59 1 /2" 19 3 /8" 16" 163 Sloped Shelving Book Displayer sloping shelf spaces for displaying books spine out at an angle for

More information

Selection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE STEEL LINE

Selection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE STEEL LINE PLUS 30 for cable carriers Support trays page 304 PLUS Guide channels page 305 RCC Rail Cable Carrier page 309 ECC Emergency Cable Carrier page 30 Strain relief devices page 3 Assembly profile bars page

More information

SLIDING GATES BRUNDLE

SLIDING GATES BRUNDLE SLIDING GATES BRUNDLE 32 BRUNDLE TOOTHED GATE RACK & ACCESSORIES TO BE WELDED TO GATE. GALVANISED OR SELF COLOUR IN ROLLED STEEL FOR GATES UP TO 1800KG Rack 22 x 22 H Art L H T L T Self Colour Self Colour

More information

C Cuisine Cart IMPORTANT NOTE

C Cuisine Cart IMPORTANT NOTE 88 9001 001C Cuisine Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken

More information

ASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM. Tools Required For Assembly. 6.5mm Masonry Drill Bit

ASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM. Tools Required For Assembly. 6.5mm Masonry Drill Bit ASSEMBLY INSTRUCTIONS DIY WALL BED KIT QUEEN BI FOLD DOOR CABINET & MECHANISM Tools Required For Assembly No 2 & No 4 Phillips Head Screwdrivers No 2 Slot Head Screwdriver Hammer Electric Drill (Hammer

More information

Designing emotions. agantis XP. Harmonious proportions. Elegant lines. Dynamic forms.

Designing emotions. agantis XP. Harmonious proportions. Elegant lines. Dynamic forms. Designing emotions agantis XP Harmonious proportions. Elegant lines. Dynamic forms. www.grass.at, info@grass.at 2 Designing emotions Focusing on the essential Dividing systems Drawer Pan drawers System

More information

INSTRUCTION SHEET U19

INSTRUCTION SHEET U19 U19 All Refrigerator and All Freezer Trim Kit Installation Product Line: U19 All Refrigerator and All Freezer Models Parts Included in Kit TRIMKITEZ1 (Part# 297333500): Single Trim Kit Components Single

More information

Factory Assistance: Phone: Fax: Page 1

Factory Assistance: Phone: Fax: Page 1 CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)

More information

NEW! D Series. Matte Black D C 8.5 D L C3 C2 C1 D D Fasteners Included M4 x 25.

NEW! D Series. Matte Black D C 8.5 D L C3 C2 C1 D D Fasteners Included M4 x 25. 2018 Addendum 2018 NEW! D200000 Series Matte Black D205192-94 28.5 C 8.5 D204128-80 C3 C2 C1 20 11 D205320-94 15 15 D29515-80 25 Fasteners Included M4 x 25 3 NEW! D200000 Series Matte Black D206192-80

More information

SPECIAL HINGES. From flap hinges and mini-hinges to glass door hinges for direct mounting on the cabinet side wall.

SPECIAL HINGES. From flap hinges and mini-hinges to glass door hinges for direct mounting on the cabinet side wall. SPECIAL HINGES From flap hinges and mini-hinges to glass door hinges for direct mounting on the cabinet side wall. 0 GRASS THE CATALOGUE 0-0 SPECIAL HINGES Hinges for special applications. Where individual

More information

In addition to this general mounting and adjustment instruction you need the fitting specification document, where the individual drilling dimensions

In addition to this general mounting and adjustment instruction you need the fitting specification document, where the individual drilling dimensions Mounting and Adjustment Instruction for corner carrousel fitting In addition to this general mounting and adjustment instruction you need the fitting specification document, where the individual drilling

More information

Section 1. Kitchen installation. Base cabinets

Section 1. Kitchen installation. Base cabinets Section 1 Kitchen installation Base cabinets Pre-build - Cabinet leg... page 16 Pre-build - Alternative cabinet leg... page 18 Pre-build - Cabinets.... page 19 Pre-build - Corner base cabinet centre upright

More information

FlexFrame - Storage Components and Skins

FlexFrame - Storage Components and Skins FlexFrame - Storage Components and Skins 1/4 Square Drive Ball-Point Hex-Bit Socket 1/8 Short Hex, 1-1/2 Overall Length McMaster Part # 54075A44 Table of Contents Topic Page Storage Components 2 General

More information

Grommets & OFFICE Accessories

Grommets & OFFICE Accessories Groets & OFFICE Accessories The technical descriptions and dimensions in this catalogue, also those with the photographs and drawings, are not binding. We reserve the right to make design improvements.

More information

FINISTA SLIM ALUMINIUM SYSTEM. Finista Slim Aluminium System. > Multifunctional, Versatile, Simple

FINISTA SLIM ALUMINIUM SYSTEM. Finista Slim Aluminium System. > Multifunctional, Versatile, Simple INIST SLIM LUMINIUM SYSTM inista Slim luminium System > Multifunctional, Versatile, Simple inista Slim luminium System The inista Slim luminium System is a multifunctional shelving program that will allow

More information

C PART LIST HARDWARE LIST. Kitchen Cart IMPORTANT NOTE

C PART LIST HARDWARE LIST. Kitchen Cart IMPORTANT NOTE 88 9200 006C Kitchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken

More information

SCI-FAB Product Specifications. Casework Section 1. Part 1 General

SCI-FAB Product Specifications. Casework Section 1. Part 1 General SCI-FAB Product Specifications Casework Section 1 Part 1 General 1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings. 1.2 TYPICAL INCLUSIONS A.

More information

Handleless Uni t Specification

Handleless Uni t Specification Handleless Uni t Specification QUALITY BRITISH CRAFTSMANSHIP 160 Handless Fitting Guide - Parts Index & Base Cabinet Section 1 150 325 DRAWER 870 870 870 73 73 720 720 DOOR 685 325 2 x

More information

Hardware Fitting Accessories Door Seals

Hardware Fitting Accessories Door Seals Areas of application Protection against cold, draught and vermin Reduces light leakage, sound insulation Smoke control, fire resistance Reduces the energy consumption of air conditioning systems (see following

More information

Connector Technology, Shelf Supports

Connector Technology, Shelf Supports Contents Carcase Connectors MINIFIX Carcase connectors and connecting bolts RONDORFIX Carcase connectors and connecting bolts MAXIFIX Carcase connectors and connecting bolts RAFIX Carcase connectors and

More information

natural anodised black anodised Coloured glass E mustard

natural anodised black anodised Coloured glass E mustard GLISS WALK-IN 2013 Registered Design Gliss Walk-In is a complete set of walk-in wardrobes. The wardrobe isolates itself to become a real self-standing room. Gliss Walk- In lends itself to linear and angular

More information

Matte Black NEW! D Series. Ask about other finishes! D D D D Fasteners Included M4 x 25

Matte Black NEW! D Series. Ask about other finishes!   D D D D Fasteners Included M4 x 25 2018 Addendum 2018 NEW! D200000 Series Matte Black D205192-94 28.5 C 8.5 D204128-80 C3 C2 C1 20 11 D205320-94 15 15 D29515-80 25 Ask about other finishes! Fasteners Included M4 x 25 3 NEW! D200000 Series

More information

Connector Technology, Shelf Supports

Connector Technology, Shelf Supports Connector Technology, Shelf Supports Contents Carcase Connectors MINIFIX Carcase connectors and connecting bolts RONDORFIX Carcase connectors and connecting bolts MAXIFIX Carcase connectors and connecting

More information

WALL SHELVING SYSTEM 250/750

WALL SHELVING SYSTEM 250/750 468 2/7 Installation Example Ceiling Height (CH) : 2800 mm Ceiling Height (CH) : 28 mm Corner Installation 2 design panels are used to cover mm space in case of ceiling height 28 mm. Corner Example 469

More information

KWS Handrail Systems. Architectural Hardware

KWS Handrail Systems. Architectural Hardware KWS Handrail Systems Architectural Hardware Technical Information KWS Handrail-Systems - the flexible solution System for handrails in stainless steel and timber Completely pre-assembled or single components

More information

BAKA Protect Serie 2000 / Protect. BAKA Protect Series 2000 / The adjustable hinge system for timber entrance doors

BAKA Protect Serie 2000 / Protect. BAKA Protect Series 2000 / The adjustable hinge system for timber entrance doors Protect Serie 2000 / 4000 Protect BAKA Protect Series 2000 / 4000 The adjustable hinge system for timber entrance doors index BAKA Protect 2D BAKA Protect 2010 2D two-dimensionally adjustable up to 120

More information

Page 1 of 5. Instructions for assembling your PacknMove boxes

Page 1 of 5. Instructions for assembling your PacknMove boxes Instructions for assembling your PacknMove boxes The majority of our boxes are very easy to construct, but a couple might look like cardboard origami at first. If you are having any problems constructing

More information

Installation Instructions

Installation Instructions Supafold Slide Aside System Three Fold Room Divider Installation Instructions Distinctive Doors Ltd Supafold Slide Aside Internal Folding System IMPORTANT: Before proceeding with the installation, and

More information

INSTALLATION GUIDE FOR METAL LABORATORY CASEWORK

INSTALLATION GUIDE FOR METAL LABORATORY CASEWORK LABORATORY Casework & Cabinets INSTALLATION GUIDE FOR METAL LABORATORY CASEWORK RDM Industrial Products, Inc. RDM LAB CABINET INSTALLATION GUIDE TABLE OF CONTENTS GENERAL INFORMATION...1 Freight Damage...1

More information

Executive furniture KARA

Executive furniture KARA Executive furniture KARA Features Kara combines contemporary fi nishes and effi cient offi ce solutions! Sturdy melamine desktops and expansive work surfaces, combined with practical storage solutions

More information

WSS-Sliding Door Systems - SPRINT. Flexible and exclusive. Varied solutions for single and double leaf all-glass doors.

WSS-Sliding Door Systems - SPRINT. Flexible and exclusive. Varied solutions for single and double leaf all-glass doors. - SPRINT Flexible and exclusive. Varied solutions for single and double leaf all-glass doors. Limited partnership, based in DE-42579 Heiligenhaus, Local court Wuppertal, HRA 20804 Personal liable partner:

More information

The complete solution: Internal organisation for ArciTech drawer systems

The complete solution: Internal organisation for ArciTech drawer systems The complete solution: Internal organisation for drawer systems OrgaTray 420 OrgaTray 420 Colour matched, plastic moulded tray to fit perfectly into a 94mm high drawer, nominal depths 450mm & 500mm. Silver

More information

Executive furniture. Moka

Executive furniture. Moka Executive furniture Moka Features Authentic executive furniture with a clean design! Moka combines conviviality and tradition with its curved lines and melamine panel legs. Functional items with various

More information

aluline 1 These aluboard8 rails are black anodised, as per customer s request.

aluline 1 These aluboard8 rails are black anodised, as per customer s request. p. 8 aluline These aluboard8 rails are black anodised, as per customer s request. 2 The steel shelves are powder coated in black in order to match with the rails. 5 Of course, the mobile shop stands made

More information

Homestead Bar Cabinet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent s

Homestead Bar Cabinet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent s 88 5527 991 Homestead Bar Cabinet IMPRTANT NTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.

More information

All our cabinets are handbuilt to order in the UK and benefit from a five year guarantee. Baseboard (to suit Floor Standing back panel) Continuous top

All our cabinets are handbuilt to order in the UK and benefit from a five year guarantee. Baseboard (to suit Floor Standing back panel) Continuous top Media Brochure & Product Guide De-clutter your living space The Media range is a modular furniture system that provides all the elements you need to organise your available space and present a flexible

More information

Lift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge

Lift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge Pivot door

More information

BOLOTA 316 OTHER PRODUCT RANGES SERVICE

BOLOTA 316 OTHER PRODUCT RANGES SERVICE BOLOTA 316 BOLOTA 316 OTHER PRODUCT RANGES SERVICE INDEX Lever Handles Escutcheons & Bathroom Turns Academy Range Pull Handles Push Plates & Kick Plates Signage Lockcases Cylinders Door Controls Hinges

More information

CHARGING DRAWER Charge all your electronics together in one complete drawer system with our 4WCDB Series.

CHARGING DRAWER Charge all your electronics together in one complete drawer system with our 4WCDB Series. Reading, PA Telford, PA Wayne, NJ Savage, MD Charlotte, NC Norcross, GA Telephone 1.800.355.1000 Fax 1.800.355.3131 customercare@chbriggs.com www.chbriggs.com AX4WCDB18SC1 CHARGING DRAWER Charge all your

More information

MOVENTO. The Evolution of Motion

MOVENTO. The Evolution of Motion The Evolution of Motion is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed since first manufacturing drawer

More information

Technical product data sheet

Technical product data sheet Seite 1 von 9 Worktops I Standard 1) 38 mm 2) Chipboard 3) Surface material Laminate (CPL/HPL) 4) Laminate thickness 0,6-0,8 mm 5) Surface structure Wood pore or relief, matt, gloss 6) Front edge types

More information

Drawer Organisation Subject to technical modifications and changes to the range without notice

Drawer Organisation Subject to technical modifications and changes to the range without notice DRAWERS Faber AND cooker RUNNERS hoods Drawer Organisation.4 DRAWERS AND RUNNERS Blum ORGA-LINE for Standard Drawers Specially designed to suit the contoured sides of the Blum TANDEMBOX drawer, ORGA-LINE

More information