Designing emotions. agantis XP. Harmonious proportions. Elegant lines. Dynamic forms.

Size: px
Start display at page:

Download "Designing emotions. agantis XP. Harmonious proportions. Elegant lines. Dynamic forms."

Transcription

1 Designing emotions agantis XP Harmonious proportions. Elegant lines. Dynamic forms.

2 2

3 Designing emotions Focusing on the essential Dividing systems Drawer Pan drawers System information For many, beauty and functionality cannot be embedded cover cap rounds off the look and supple- united. For us, they are inseparable. ments the style of this design piece. Whereas fitting system manufacturers have so far been limiting themselves to product functions, Grass are DWD XP Agantis combines the advantages of the adding another highlight to their programme with their proven DWD XP drawer system with timelessly newly developed Agantis design line. The engineers and designers were less concerned about optical effects than the combination of perfect function with the fascination of simple beauty. Clear lines, clear forms, with clear advantages. beautiful design. While the DWD XP drawer system has already impressed not only with its excellent movement characteristics but also with its qualitative and functional advantages such as the comfortable Tipmatic Plus opening technology, Dynamic XP drawer runners The result is impressive. the integrated Soft-close system or well thought-out organising and dividing systems, these highlights are The modest, linear DWD XP Agantis drawer sides are now supplemented by a design which has yet to meet The flexible Flexline drawer system available in the standard heights 95 mm and 127 mm its match in terms of pure forms in fitting systems. of the Sidewood series supplements and can be additionally expanded with a square rail and Agantis Top an exclusive glass top piece. The flushly The new, exclusive Champagne surface. The dual coated, matt gleaming Champagne surface the Agantis programme with its timeless elegance. The matt gleaming Champagne surface flatters the wood and makes a feature of it. is scratch-resistant and distinguises itself with its high Applications Technical information level of touch insensitivity. It emphasises the high design standards and accentuates the overall colour-coordinated system. 3

4 Clear lines and forms in combination with perfect workmanship DWD XP Agantis appeals to everyone looking for something special 4

5 Applications Technical information Dynamic XP drawer runners Dividing systems Drawer Pan drawers System information 5

6 DWD XP Agantis Programme overview Page Drawers and pan drawers Drawer Drawer side height 95 und 127 mm 8 11 Double-wall metal drawer sides for wooden and steel back walls Wooden back wall holder Front fixing Cover caps Pan drawer with square rail Drawer side height 95 and 127 mm Double-wall metal drawer sides for wooden and steel back walls Wooden back wall holder Cover caps Square rail Pan drawer with Agantis Top Drawer side height 95 and 127 mm Double-wall metal drawer sides for wooden and steel back walls Wooden back wall holder Cover caps Agantis Top glass holder Glass not included in the scope of delivery Dividing systems Magic Sorto set Drawer organising Magic Optima for drawer side heights 95 and 127 mm Dividing profile Magic Optima holder Smart Board 6

7 Page Drawer runners / Tipmatic Plus Dynamic XP 40/60 kg Full-extension 40/60 kg with integrated Soft-close Full-extension 80 kg (upon request) Illustration: Full-extension drawer 40 kg System information Tipmatic Plus 40 kg Full-extension 40 kg Opens and closes drawers and pan drawers without handles Drawers Pan drawers, assembly aids Front bottom connector Knock-in tool for bottom connectors Drilling jig for front bottom connectors DWD XP spacer DWD XP child lock Dividing systems DWD XP Pneumatic mounting clamp DWD XP Drilling jigs DWD XP Marker jig DWD XP Knock-in tool Insertion ram for front fixing Rail drilling jigs Centring drill Screwdriver Screws Dynamic XP drawer runners Applications / Technical Information DWD XP sink drawer Optionally with wooden or steel back Foldable steel backs Agantis inset drawer Profile and holder for inset front panels Sidewood organising systems For drawers and pan drawers Technical Information Applications Technical Information 7

8 DWD XP Agantis drawer H 95 Drawer sides, height 95 mm, front fixings and holder for wooden back wall Modern, linear design Scratch-resistant and touch-insensitive due to dual coating Exclusive matt gleaming Champagne surface Flushly embedded cover caps Bottom fixing with screws or knock-in claws Integrated removal and transport protection Same width of bottom and back Front fixing made of zinc die-casting 2-dimensional front adjustment with cam height adjustment 1 DWD XP Agantis drawer sides H 95 Nominal length in mm Champagne Champagne PU/packaging unit PU 1 PU 20 PU 1 = 1 set / drawer sides left and right with cover caps PU 20 = 20 drawer sides left and right in separate boxes, incl. cover caps Nominal length 300 mm on request Imprinted cover caps on request 2 Holder set for wooden back wall H 86 Holder set Champagne Champagne Height VE VE200 PU/Packaging Unit PU 1/100 PU 200 PU 1/100 = 1 set (left / right) per bag / 100 sets per carton PU 200 = 200 sets (left / right) loose in separate cartons Steel back wall upon request 3 Front fixing Front fixing Screw-in 6850.VE400 Plug 6860.VE400 Expanding dowel 6865.VE400 PU/packaging unit PU 400 PU 400 = 400 pcs. loose in carton 8

9 Fitting dimensions Cutting measurements for 16 mm particle board Inside cabinet width = LW Drawer back width = LW -74 Back wall Back wall width LW Back wall height System information min. 49 min Ø 3,5 x 15 Wood screw Ø 10 x 12 for dowels Bottom width = LW Bottom overlay Bottom Bottom width LW -74 Bottom length NL -9 Minimum installation depth = NL NL = Nominal length of runner Drawers Pan drawers Side overlay Assembly instructions: Front fastening with press-in dowels When using front fixings with press-in dowels, the front holes must be appropriately countersunk. The sharp edges produced with hard surface coatings, e.g. melamine, can to some extent cut off the ribs of the dowels as they are pressed in. This can significantly reduce the holding strength. Alternatively, front fixings with expanding dowels can be used, which do not require any countersinking and still guarantee optimal holding strength. Organising systems Drawer with wooden back 2 Holder for wooden back wall 86 mm Dynamic XP drawer runners Dynamic XP 40 kg, see page 24 Dynamic XP 60 kg, see page 24 Dynamic XP Tipmatic Plus 40 kg, see page 26 3 Front fixing 1 For mounting to cabinet side we recommend special Euro screws 191 and 192, see page 33 Drawer sides Agantis H 95 All dimensions in millimetres. Dynamic XP drawer runners page Magic Sorto organising system page page Tipmatic Plus page page Technical information page Applications Technical information 9

10 DWD XP Agantis drawer H 127 Drawer sides, height 127 mm, front fixings and holder for wooden back wall Modern, linear design Scratch-resistant and touch-insensitive due to dual coating Exclusive matt gleaming Champagne surface Flushly embedded cover caps Bottom fixing with screws or knock-in claws Integrated removal and transport protection Same width of bottom and back Front fixing made of zinc die-casting 2-dimensional front adjustment with cam height adjustment 1 DWD XP Agantis drawer sides H 127 Nominal length in mm Champagne Champagne PU/packaging unit PU 1 PU 20 PU 1 = 1 set / drawer sides left and right with cover caps PU 20 = 20 drawer sides left and right in separate boxes, incl. cover caps Nominal length 300 mm on request Imprinted cover caps on request 2 Holder set for wooden back wall H 118 Holder set Champagne Height VE1 PU/packaging unit PU 1/100 PU 1/100 = 1 set (left/right) in plastic bags / 100 set in carton Steel drawet back upon request 3 Front fixing Front fixing Screw-in 6850.VE400 Plug 6860.VE400 Expanding dowel 6865.VE400 PU/packaging unit PU 400 PU 400 = 400 pcs. loose in carton 10

11 Fitting dimensions Cutting measurements for 16 mm particle board Inside cabinet width = LW Drawer back width = LW -74 Back wall Back wall width LW Back wall height System information min. 81 min Ø 3,5 x 15 Wood screw Ø 10 x 12 for dowels Bottom Bottom width LW -74 Bottom length NL -9 Drawers Pan drawers Minimum installation depth = NL NL = Nominal length of runner Bottom width = LW Side overlay Bottom overlay Assembly instructions: Front fastening with press-in dowels When using front fixings with press-in dowels, the front holes must be appropriately countersunk. The sharp edges produced with hard surface coatings, e.g. melamine, can to some extent cut off the ribs of the dowels as they are pressed in. This can significantly reduce the holding strength. Alternatively, front fixings with expanding dowels can be used, which do not require any countersinking and still guarantee optimal holding strength. Dividing systems Drawer with wooden back wall 2 Holder for wooden back wall height 118 mm Dynamic XP drawer runners Dynamic XP 40 kg, see page 24 Dynamic XP 60 kg, see page 24 Dynamic XP Tipmatic Plus 40 kg, see page 26 3 Front fixing 1 For mounting to cabinet side we recommend special Euro screws 191 and 192, see page 33 Drawer side Agantis H 127 All dimensions in millimetres. Dynamic XP drawer runners page Magic Sorto organising system page page Tipmatic Plus page page Technical information page Applications Technical information 11

12 DWD XP Agantis pan drawer H 95 with square rail Drawer sides, height 95 mm, front fixings and holder for wooden back wall Modern, linear design Scratch-resistant and touch-insensitive due to dual coating Exclusive matt gleaming Champagne surface Tool-free clip assembly of drawer back Simple adjustment of front inclination Fast, stable connection to the drawer front through screw assembly 1 DWD XP Agantis drawer sides H 95 Nominal length in mm Champagne Champagne PU/packaging unit PU 1 PU 20 PU 1 = 1 set / drawer sides left and right incl. cover caps PU 20 = 20 drawer sides left and right in separate boxes, incl. cover caps Imprinted cover caps on request 2 Holder set for wooden back wall H 182 Holder set Champagne Champagne Height VE VE200 PU/packaging unit PU 1/100 PU 200 PU 1/100 = 1 set (left/right) in plastic bags / 100 set in carton PU 200 = 200 sets (left / right) loose in separate cartons Steel drawer back upon request 3 Front fixing Front fixing Screw-in 6850.VE400 Plug 6860.VE400 Expanding dowel 6865.VE400 PU/packaging unit PU 400 PU 400 = 400 units, loose, boxed 4 Square rail set for screwing-in Nominal length in mm Champagne PU/packaging unit PU 1/10 PU 1/10 = 1 set in a plastic bag / 25 set in carton 1 set consists of: 2 square rails; 1 set of rail holders rear left/right; 2 front fixing covers; 2 front fixings 12

13 Fitting dimensions Cutting measurements for 16 mm particle board Inside cabinet width = LW Drawer back width = LW -74 Back wall Back wall width LW Back wall height System information min. 150 min Ø 3,5 x 15 Wood screw Ø 10 x 12 for dowels Bottom width = LW Side overlay Bottom overlay Bottom Bottom width LW -74 Bottom length NL -9 Minimum installation depth = NL NL = Nominal length of runner Assembly instructions: Front fastening with press-in dowels When using front fixings with press-in dowels, the front holes must be appropriately countersunk. The sharp edges produced with hard surface coatings, e.g. melamine, can to some extent cut off the ribs of the dowels as they are pressed in. This can significantly reduce the holding strength. Alternatively, front fixings with expanding dowels can be used, which do not require any countersinking and still guarantee optimal holding strength. Drawers Pan drawers Dividing systems Pan drawer with wooden back wall and square rail 2 Holder for wooden back wall height 182 mm Inclinination adjustment Dynamic XP drawer runners 4 Square rail set Dynamic XP 40 kg, see page 24 Dynamic XP 60 kg, see page 24 Dynamic XP Tipmatic Plus 40 kg, see page 26 3 Front fixing 1 For mounting to cabinet side we recommend special Euro screws 191 and 192, see page 33 Drawer side Agantis H 95 All dimensions in millimetres. Dynamic XP drawer runners page Magic Optima organising system page page Tipmatic Plus page page Technical information page Applications Technical information 13

14 DWD XP Agantis pan drawer H 127 with square rail Drawer sides, height 127 mm, front fixings and holder for wooden back wall Modern, linear design Scratch-resistant and touch-insensitive due to dual coating Exclusive matt gleaming Champagne surface Tool-free clip assembly of drawer back Simple adjustment of front inclination Fast, stable connection to the drawer front through screw assembly 1 DWD XP Agantis drawer sides H 127 Nominal length in mm Champagne Champagne PU/packaging unit PU 1 PU 20 PU 1 = 1 set / drawer sides left and right with cover caps PU 20 = 20 decor left and right in separate boxes, incl. cover caps Nominal length 300 mm on request Imprinted cover caps on request 2 Holder set for wooden back wall H 214 Holder set Champagne Champagne Height VE VE200 PU/Packaging Unit PU 1/100 PU 200 PU 1/100 = 1 set (left/right) in plastic bags / 100 set in carton PU 200 = 200 sets (left / right) loose in separate cartons 3 Front fixing Front fixing Screw-in 6850.VE400 Plug 6860.VE400 Expanding dowel 6865.VE400 PU/packaging unit PU 400 PU 400 = 400 pcs. loose in carton 4 Square rail set for screwing-in Nominal length in mm Champagne PU/packaging unit PU 1/10 PU 1/10 = 1 set in a plastic bag / 25 set in carton 1 set consists of: 2 square rails; 1 set of rail holders rear left/right; 2 front fixing covers; 2 front fixings 14

15 Fitting dimensions Cutting measurements for 16 mm particle board Inside cabinet width = LW Drawer back width = LW -74 Back wall 196 Back wall height System information 12 Back wall width LW -74 min. 182 min Ø 3.5 x 15 Wood screw Ø 10 x 12 for dowels Bottom width = LW Side overlay Bottom overlay Bottom Bottom width LW -74 Bottom length NL -9 Minimum installation depth = NL NL = Nominal length of runner Assembly instructions: Front fastening with press-in dowels When using front fixings with press-in dowels, the front holes must be appropriately countersunk. The sharp edges produced with hard surface coatings, e.g. melamine, can to some extent cut off the ribs of the dowels as they are pressed in. This can significantly reduce the holding strength. Alternatively, front fixings with expanding dowels can be used, which do not require any countersinking and still guarantee optimal holding strength. Drawers Pan drawers Dividing sytems Pan drawer with wooden back wall and square rail 2 Holder for wooden back wall height 214 mm Inclination adjustment Dynamic XP drawer runners 4 Square rail set Dynamic XP 40 kg, see page 24 Dynamic XP 60 kg, see page 24 Dynamic XP Tipmatic Plus 40 kg, see page 26 3 Front fixing 1 For mounting to cabinet side we recommend special Euro screws 91 and 192, see page 33 Drawer side Agantis H 127 All dimensions in millimetres. Dynamic XP drawer runners page Magic Optima organising system page page Tipmatic Plus page page Technical information page Applications Technical information 15

16 DWD XP Agantis pan drawer H 95 with Agantis Top glass holder Drawer sides, height 95 mm, front fixings and holder for wooden back wall Modern, linear design Scratch-resistant and touch-insensitive due to dual coating Exclusive matt gleaming Champagne surface Simple adjustment of front inclination Fast, stable connection to the drawer front through screw assembly Precious, valuable glass look (8 mm glass) * Simple fitting and removal * Glass sides not supplied by Grass 1 DWD XP Agantis drawer sides H 95 Nominal length in mm Champagne Champagne PU/packaging unit PU 1 PU 20 PU 1 = 1 set / drawer sides left and right with cover caps PU 20 = 20 drawer sides left and right in separate boxes, incl. cover caps Nominal length 300 mm on request Imprinted cover caps on request 2 Holder set for wooden back wall H 182 Holder set Champagne Champagne Height VE VE200 PU/packaging unit PU 1/100 PU 200 PU 1/100 = 1 set (left/right) in a plastic bag / 100 set in carton PU 200 = 200 sets loose in separate cartons Steel back upon request 3 Front fixing Front fixing Screw-in 6850.VE400 Plug 6860.VE400 Expanding dowel 6865.VE400 PU/packaging unit PU 400 PU 400 = 400 pcs. loose in carton 4 Agantis Top glass holder set to screw on Glass holder set item No. Champagne to screw on VE100 PU/packaging unit PU 100 PU 100 = 100 set in carton 1 set consists of: 2 glass holders for clipping on, rear left/right; 2 glass holders for screwing on, front left/right; 4 eccentric screws 16

17 Fitting dimensions Cutting measurements for 16 mm particle board Inside cabinet width = LW Drawer back width = LW -74 Back wall Back wall width LW Back wall height System information min. 150 min Ø 3.5 x 15 Wood screw Ø 10 x 12 for dowels Bottom Bottom width LW -74 Bottom length NL -9 Minimum installation depth = NL NL = Nominal length of runner Glass cutting (1 x 45 fibre circumferential) NL - 44 Drawers Pan drawers Bottom width = LW Bottom overlay ø 6,15 90 = = Dividing systems Side overlay 1 x 45 Pan drawer with wooden back wall and glass top 2 Holder for wooden back wall height 182 mm We recommend ESG glass (single pane safety glass) and refer to national and international safety standards. Inclination adjustment Dynamic XP drawer runners 4 Agantis Top glass holder set Dynamic XP 40 kg, see page 24 Dynamic XP 60 kg, see page 24 Dynamic XP Tipmatic Plus 40 kg, see page 26 3 Front fixing 1 For mounting to cabinet side we recommend special Euro screws 191 and 192 see page 33 Drawer side Agantis H 95 All dimensions in millimetres. Dynamic XP drawer runners page Magic Optima organising sytem page page Tipmatic Plus page page Technical information page Applications Technical information 17

18 DWD XP Agantis pan drawer H 127 with Agantis Top glass holder Drawer sides height 127 mm, front fixings and holder for wooden back wall Modern, linear design Scratch-resistant and touch-insensitive due to dual coating Exclusive matt gleaming Champagne surface Simple adjustment of front inclination Fast, stable connection to the drawer front through screw assembly Precious, valuable glass look (8 mm glass) * Simple fitting and removal * Glass sides not supplied by Grass 1 DWD XP Agantis drawer sides H 127 Nominal length in mm Champagne Champagne PU/packaging unit PU 1 PU 20 PU 1 = 1 set / drawer sides left and right with cover caps PU 20 = 20 drawer sides left and right in separate boxes, incl. cover caps Nominal length 300 mm on request Imprinted cover caps on request 2 Holder set for wooden back wall H 214 Holder set Champagne Champagne Height VE VE200 PU/Packaging Unit PU 1/100 PU 200 PU 1/100 = 1 set (left/right) in plastic bags / 100 set in carton PU 200 = 200 sets loose in separate cartons 3 Front fixing Front fixing Screw-in 6850.VE400 Plug 6860.VE400 Expanding dowel 6865.VE400 PU/packaging unit PU 400 PU 400 = 400 pcs. loose in carton 4 Agantis Top glass holder set to screw on Glass holder set item No. Champagne to screw on VE100 PU/packaging unit PU 100 PU 100 = 100 set in carton 1 set consists of: 2 glass holders for clipping on, rear left/right; 2 glass holders for screwing on, front left/right; 4 eccentric screws 18

19 Fitting dimensions Cutting measurements for 16 mm particle board Inside cabinet width = LW Drawer back width = LW -74 Back wall 196 Back wall height System information Back wall width LW -74 min min Ø 3.5 x 15 Wood screw Ø 10 x 12 for dowels Bottom Bottom width LW -74 Bottom length NL -9 Minimum installation depth = NL NL = Nominal length of runner Glass cutting (1 x 45 fibre circumferential) NL Drawers Pan drawers Bottom width = LW Side overlay Bottom overlay ø 6, x 45 = = Dividing systems Pan drawer with wooden back and glass top 2 Holder for wooden back wall height 214 mm We recommend ESG glass (single pane safety glass) and refer to national and international safety standards. Incline adjustment Dynamic XP drawer runners 4 Agantis Top glass holder set Dynamic XP 40 kg, see page 24 Dynamic XP 60 kg, see page 24 Dynamic XP Tipmatic Plus 40 kg, see page 26 3 Front fixing 1 For mounting to cabinet side we recommend special Euro screws 191 and 192, see page 33 Drawer side Agantis H 127 All dimensions in millimetres. Dynamic XP drawer runners page Magic Optima Organising system page page Tipmatic Plus page page Technical information page Applications Technical information 19

20 DWD XP Magic Sorto Drawer organising sets Modular, expandable system Individually removable, dishwasher-proof elements Safe for food, hygienically approved Stainless-steel trays, alu metallic divider rail plastic parts in Champagne finish 1 Magic Sorto Set Nominal length in mm Set Item-No. Champagne 500 B B B4S PU/packaging unit PU 1 PU 1 = 1 set in carton B3 Magic Sorto NL 500 and corpus widths from 450 mm. Consisting of: 3 trays 270 x 90 mm 3 trays 180 x 90 mm 1 spacer 270 mm 1 spring-loaded divider rail B4 Magic Sorto NL 500 and corpus widths from 600 mm. Consisting of: 4 trays 270 x 90 mm 4 trays 180 x 90 mm 2 spacers 180 mm 1 spring-loaded divider rail B4S Magic Sorto NL 500 and corpus widths from 600 mm. Consisting of: 1 Schale 450 x 90 mm 3 trays 270 x 90 mm 3 trays 180 x 90 mm 2 spacers 180 mm 1 spring-loaded divider rail 20

21 Measurements Sorto trays 271, System information X Drawers Pan drawers X 41 Dividing systems Pan drawer with wooden back and glass top Tray 180 x 90 Spacer Dynamic XP drawer runners Spring-loaded divider rail Tray 270 x 90 Tray 450 x 90 All dimensions in millimetres. and assembly aids Dynamic XP drawers page Tipmatic Plus page page Dynamic XP drawer runners page page Technical information page Applications Technical information 21

22 DWD XP Agantis Magic Optima Dividing systems for pan drawers, drawer sides, height 95 and 127 mm Individual organisation of the storage space for a clearer and tidier arrangement Fast, tool-free assembly Upgradable at any time Tool-free adjustment, variable of storage space Completely colour-coordinated system 1 Magic Optima dividing profile Divider profile Champagne Cabinet width 1200 for trimming PU/packaging unit PU 10 PU 10 = 10 pcs. wrapped separately in film 2 Magic Optima profile holder for H 95 and 127 Profile holder Champagne for drawer side H for drawer side H PU/packaging unit PU 2/40 PU 2/40 = 2 sets in a plastic bag / 40 units in carton 3 Magic Optima Smart Board Smart Board Champagne for clipping on PU/packaging unit PU 20 PU 20 = 20 pcs. loose Set packaging on request 22

23 Cutting measurements for dividing profile Magic Optima Agantis drawer side H 95 Magic Optima Agantis drawer side H 127 Inside cabinet width = LW Inside cabinet width = LW System information X = LW -115 X = LW -115 Drawers Pan drawers Drawer side H 95 Drawer side H 127 Dividing systems 2 Magic Optima profile holder H 95 1 Magic Optima divider profile 2 Magic Optima profile holder H 127 Dynamic XP drawer runners 1 Applications Technical information Magic Optima divider profile 3 Magic Optima Smart Board 3 Magic Optima Smart Board All dimensions in millimetres. and assembly aids DWD XP pan drawers page Tipmatic Plus page page Dynamic XP drawer runners page page Technical information page

24 Dynamic XP full-extension drawer runner with integrated Soft-close Synchronised full-extension drawer runner for drawers and pan drawers Integrated Soft-close technology Excellent movement characteristics Low drop values High side stability 40 kg softclose Dynamic XP full-extension drawer runner 40 kg with integrated Soft-close Nominal length in mm PU/packaging unit PU 1 PU 20 PU 1 = 1 set / full-extension drawer runners, 40 kg, left and right-handed in carton PU 20 = 20 full-extension drawer runners, 40 kg, left and right in separate cartons Nominal length 300 mm on request Synchronised full-extension drawer runner for drawers and pan drawers Integrated Soft-close technology Excellent movement characteristics Low drop values High side stability 60 kg softclose Dynamic XP full-extension drawer runner 60 kg with integrated Soft-close Nominal length in mm PU/packaging unit PU 1 PU 20 PU 1 = 1 set / full-extension drawer runners, 60 kg, left and right-handed in carton PU 20 = 20 full-extension drawer runners, 60 kg, left and right-handed in separate cartons Dynamic XP full-extension drawer runner 80 kg on request. 24

25 Fixing positions for full-extension 40 kg Front edge of cabinet 2 mm set back Special Euro screw Ø 6.3 x 14 mm Particle board screw Ø 3.5 x 15 mm Front edge of cabinet 2 mm set back System information Drawers Pan drawers Dividing systems Fixing positions for full-extension 60 kg Front edge of cabinet 2 mm set back Special Euro screw Ø 6.3 x 14 mm Particle board screw Ø 3.5 x 15 mm Front edge of cabinet 2 mm set back Dynamic XP drawer runners For mounting to cabinet side we recommend special Euro screws 191 and 192 see page 33 All dimensions in millimetres. and assembly aids Dynamic XP drawers page Tipmatic Plus page page Dynamic XP pan drawers page page Techniccal information page Applications Technical information 25

26 Dynamic XP Tipmatic Plus full-extension drawer runner, 40 kg Opens and closes drawers and pan drawers without handles Lightly tap anywhere on the front panel to trigger the opening of the drawer Optimum access to the drawer contents due to fully extended drawer Unique, purely mechanical function Latch function guarantees gentle and secure closing Precise adjustment of the front gap (4 mm) by vertical adjustment on both sides No modification of drawer required Can be used for all cabinet widths and side thicknesses Use standard drilling layout for fitting 1 Dynamic XP Tipmatic Plus full-extension drawer runner, 40 kg tipmatic-plus Nominal length in mm PU/packaging unit PU 1 PU 1 = 1 set / full-extension drawer runner, 40 kg lh and rh in carton including fitting instructions Dynamic XP Tipmatic Plus drawer runner, 40 kg, NL 500 in PU 5 on request Dynamic XP Tipmatic Plus drawer runner, 60 kg, NL 500, 600, 650 on request 2 Tipmatic Plus locking set Locking set 6440 PU/packaging unit PU 1/20 PU 1/20 = 1 locking set lh/rh and 2 connecting levers per bag, 20 sets per carton 3 Tipmatic Plus connecting rod for cutting to size Connecting rod for cabinet width 1200/S PU/packaging unit PU 10 PU 10 = 10 connecting rods for cutting to size 4 Front buffers for Tipmatic Plus Front buffer for Tipmatic Plus PU/packaging unit PU 100 PU 100 = 100 pcs. loose in bag 26

27 Fitting dimensions Mounting positions for cabinet slides Inside cabinet width = LW Drawer back width = LW -74 Special Euro screw Ø 6.3 x 14 mm Particle board screw Ø 3.5 x 15 mm Front edge of cabinet 2 mm set back System information min. 49 min Minimum assembly depth = NL+24 NL = Nominal length Dimension for connecting rod LW - 97 Ø 3,5 x 15 Wood screw Ø 10 x 12 for dowels Bottom width = LW -74 Front buffer Ø 5,2 (Bore hole Ø5) 21.5 Side overlay 0, Bottom overlay Min. installation depth = NL +24 Front edge of cabinet 2 mm set back Drawers Pan drawers Dividing systems Dynamic XP Tipmatic Plus full-extension drawer runner, 40 kg 2 2 Locking device Connecting lever Dynamic XP drawer runners 3 Connecting rod 4 Front buffer 1 Dynamic XP Tipmatic Plus, 40 kg We recommend special Euro screws for fixing to the cabinet. All dimensions in millimetres. and assembly aids Dynamic XP drawers page Dynamic XP drawer runners page page Dynamic XP pan drawers page page Techniccal information page Applications Technical information 27

28 for DWD XP Front-bottom connector For a solid connection between bottom and front. Allows subsequent adjustment of the front panel (horizontally and vertically). Recommended for drawers from cabinet width 800 mm PU 100 PU/packaging unit 100 = 100 sets x = drawer front overhang Punch Punch for front-bottom connector PU 1 PU/packaging unit 1 = 1 piece Dynamic XP drawers page Dynamic XP pan drawers page Technical information page

29 Drilling gauge for front bottom connector For drilling the bottom of wide drawers and using the Grass front-bottom connector PU 1 PU/packaging unit 1 = 1 set System information Drilling jig set for front-bottom connector, consisting of: 1 x drill head 1 x punch 1 x drill bit 15 mm 1 x drill bit 8 mm 1 x hexagonal bit 1 x Allen key 3 mm 1 x Allen key 4 mm Dynamic XP drawer runners Drawers Pan drawers Dividing systems Applications Technical information Use drilling jig for front-bottom connection Drawer bottom drill holes for front-bottom connector Dynamic XP drawers page Dynamic XP pan drawers page Technical information page

30 for DWD XP. DWD XP spacer 25 mm For internal drawers behind a door in order to bridge the door gap. Can be installed at left or right. Secure fastening of the Dynamic XP full-extension drawer runners with loadbearing capacity of 40 kg. alu-grey 6975 PU 50 PU/packaging unit 50 = 50 sets 1 set consists of: 1 spacer back and front, 4 special Euro screws Photo for illustration only. 25 DWD XP Child Lock Easy and quick to fit. Concealed at the drawer bottom. Can be deactivated, simple operation. Can be taken off without leaving a trace. alu-grey 6879.VE1 PU 1/100 PU/packaging unit = 1 set in a plastic bag consisting of: child lock, limit stop, screw / 100 sets in carton Dynamic XP drawers page Dynamic XP pan drawers page Technical information page

31 for DWD XP DWD XP pneumatic mounting clamp Pneumatic mounting clamp for quick assembly of DWD XP drawers and pan drawers PU 1 System information DWD XP cabinet drilling jig A B Application You have two options for fitting the stop: Position A Centre of cabinet slide holes Position B Lower edge of DWD XP drawer side (55 mm below the fixing hole) PU 1 PU/packaging unit = 1 set PU/packaging unit 1 = 1 pc. in carton Drawers Pan drawers 1 set consists of: 1 runner ruler, 4 stop elements, fitting For all cabinet slides. instructions To be used in the assembled cabinet with min. depth 350 mm. Use Ø 5 mm drill bit for 6 mm Drill bit Ø 5 mm with collar for Euro screws Drill bit Ø 5 mm Dividing systems Euro screws Position PU 1 PU/packaging unit = 1 piece DWD XP cabinet drilling jig Drilling jig for cabinet slide of Dynamic XP full-extension runners and Dynamic NT PU 1 Dynamic XP drawer runners PU/packaging unit 1 = 1 piece Drilling jig XP Tipmatic Plus For Dynamic XP Tipmatic Plus full-extension drawer runners 6923 NL PU 1 PU/packaging unit 1 = 1 piece Dynamic XP drawers page Dynamic XP pan drawers page Technical information page NL 550 NL 500 NL 450 NL 400 NL 550 NL 500 NL 450 NL 400 Applications Technical information 31

32 for DWD XP DWD XP marker jig set Marker jig set for DWD XP front fixing PU 1 PU/packaging unit 1 = 1 set DWD XP front drilling jig Front drilling jig for DWD XP front fixing, railings and add-on systems PU 1 PU/packaging unit 1 = 1 piece DWD XP knock-in tool Knock-in tool for DWD XP front fixing with dowels PU 1 PU/packaging unit 1 = 1 piece Insertion ram Insertion ram for DWD XP dowels front fixing 6860 with Ecoflex drilling and insertion jig PU 1 PU/packaging unit 1 = 1 piece Dynamic XP drawers page Dynamic XP pan drawers page Technical information page

33 DWD XP drilling jig for railing Drilling jig for DWD XP railing PU 1 PU/packaging unit 1 = 1 piece System information Centring drill bit Ø 3,5 mm Centring drill bit for predrilling countersink particle board screws Ø 3.5 mm PU 1 Drawers Pan drawers PU/packaging unit 1 = 1 piece Spare drill bit PU 1 PU/packaging unit 1 = 1 piece Dividing systems Screw driver Grass crosshead screwdriver (Pozidrive No. 2) PU 1 PU/packaging unit 1 = 1 piece Dynamic XP drawer runners Euro screw, nickel-plated Wood screw, nickel-plated /Ø 6.3 x 10.5 mm /Ø 6.3 x 14 mm PU 1000 PU/packaging unit 1000 = 1000 pieces /Ø 3.5 x 15 mm 198 PU 1 PU/packaging unit 1000 = 1000 pieces Ø 6.3 Ø 3.5 Länge Ø Ø 7 Dynamic XP drawers page Dynamic XP pan drawers page Technical information page Applications Technical information 33

34 DWD XP sink drawer Application example. Easy assembly with DWD XP standard products Variable width, variable cut As drawer or pan drawer All dividing systems fit Foldable steel back walls for sink cabinets. Widths 600, 800, 900 and 1200 on request. Photo DWD Dynamic XP for illustration only. Sink drawer application example Square rail NL 500 DWD XP drawer side NL Wooden back wall, variable width (steel back wall from cabinet width 250) Holder for high wooden back wall H182 DWD XP Agantis drawer side H 95 NL 500 Dynamic XP full-extension drawer runner, 60 kg Inset drawer front Front panel Front fixing 34

35 Fitting dimensions Inside cabinet width = LW B = E +31 A = D +31 Wooden back wall width = E Wooden back wall width = D System information min. 150 min Ø 3,5 x 15 Wood screw Ø 10 x 12 for dowels Drawers Pan drawers Bottom width = LW -74 Side overlay 21.5 Bottom overlay Dividing systems Cutting dimensions for inside front 15 min E (variable dimension) Bore hole centre distance (Inside front) = LW A - B 21.5 D (variable dimension) Dynamic XP drawer runners Cut out measurement = NL - 9 Interior front Bottom length = NL -9 Bottom Bottom width = LW -74 All dimensions in millimetres. Dynamic XP drawers page Dynamic XP pan drawers page Technical information page Applications Technical information 35

36 Application examples Ideally supplemented Sidewood Flexline and Sidewood push-in systems The flexible solid wood organising systems Solid wood looks good with Flexline, the new Sidewood organising system. The organising system adjusts to any cabinet width and can be individually equipped with many useful utensils: cutlery, knives, spices and cling film as well as the Magic Sorto stainless steel trays all find their place. The push-in system for individually designing your pan drawers. This innovative push-in system impresses with its user friendliness. Adjustable perforated plates enable you to arrange your system to suit non-standard dimensions. Flexible arrangement of the different elements creates an individual configuration. Please see the Sidewood brochure for further information. Agantis inset front panels The Agantis XP system can be supplemented with the elegant Ninka inset front panels The colour-coordinated Ninka inset front panels for drawer heights of 95 and 127 mm complete the system and continue the clean lines of the Agantis XP series. 36

37 Technical information for DWD-Dynamic-XP Inserting the drawer Removing the drawer Dividing systems System information Place drawer onto extended slides. Raise drawer slightly at the front and push fully home. The drawer will be locked into place automatically! Open drawer to about 10 cm before full-extension and raise slightly. Pull out sharply HORIZONTALLY until the drawer audibly disengages and then lift off. Drawers Pan drawers Fitting the drawer front Side adjustment Removing the drawer front Click. Insert front holder into drawer sides. Drawer front snaps shut automatically and is fixed. Turn screw (A). Due to the integrated lateral adjustment only the rh side has to be adjusted. Use Pozi No. 2 screwdriver to release locking mechanism. Drawer front is unlocked and can be removed. Release front-bottom connector if applicable. Dynamic XP drawer runners Vertical cam adjustment Fitting instructions Expanding dowel Ø 10 x 12 mm Press-in dowel Ø 10 x 12 mm Front fastening with press-in dowels Loosen adjustment screw on both sides. Applications Technical information Adjust drawer front and tighten screws again. When using front fixings with press-in dowels, the holes in the front should be appropriately countersunk. The sharp edges produced when drilling into hard surface coatings, e.g. melamine, can damage some of the dowel ribs when they are pressed in. This can significantly reduce the holding strength. Alternatively, front fixings with expanding dowels can be used, this does not require any countersinking and still guarantees optimum holding strength. 37

38 Agantis_EN.QXP:Layout :55 Uhr Seite 38 Technical information for DWD-Dynamic-XP. Agantis square rail assembly Disassembly Agantis Top glass holder assembly Rail front adjustment Agantis Top glass holder disassembly Glass holder adjustment Adjust eccentric screw on both sides. 38

39 40 kg total weight 60 / 80 kg Durability test 100,000 open/close cycles 60,000 open/close cycles System information kg kg kg kg Vertical load test 5 x 5 seconds, 2/3 extended, additional load on corner: 175 N 5 x 5 seconds, 2/3 extended, additional load on corner: 200 N Drawer Pan Drawers kg kg kg kg Horizontal load test Dividing systems 5 x 5 seconds, 2/3 extended, right/left alternating 5 x 5 seconds, 2/3 extended, right/left alternating kg kg kg kg Dynamic XP drawer runners Dynamic load on front panels and limit stops open and close 10 x at 0.6 metre/sec open and close 10 x at 0.55 metre/sec with 60 kg load open and close 10 x at 0.45 metre/sec with 80 kg load kg kg kg kg Pull-out safety Applications Technical information open 10 x at 1.0 metre/sec Requirements and limits according to internal guidelines Stated loads apply up to nominal length of 500 mm Loading reduces with increasing nominal length open 10 x at 0.85 metre/sec with 60 kg load open 10 x at 0.75 metre/sec with 80 kg load 39

40 Grass GmbH Furniture fittings Grass Platz Höchst Austria Tel. +43 / 5578 / Fax +43 / 5578 / info@grass.at F / (ENG) GRASS Advertising Subject to changes, no liability for printing errors accepted

Tried-and-tested quality.

Tried-and-tested quality. Tried-and-tested quality. Rugged single and full-extension drawer slides in tried-and-tested quality for top requirements. www.grass.at, info@grass.eu Roller slides Tried-and-tested quality and functionality.

More information

TheDrawerDepot.com DYNAPRO DYNAPRO SLIDE SYSTEM. The new generation of concealed undermount slides. Elegant, comfortable, and precision engineered.

TheDrawerDepot.com DYNAPRO DYNAPRO SLIDE SYSTEM. The new generation of concealed undermount slides. Elegant, comfortable, and precision engineered. TheDepot.com DYNAPRO DYNAPRO SLIDE SYSTEM The new generation of concealed undermount slides. Elegant, comfortable, and precision engineered. TheDepot.com TheDepot.com To create a product innovation is

More information

Organisational Kitchen Fittings Kitchen Cabinet Accessories

Organisational Kitchen Fittings Kitchen Cabinet Accessories Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic

More information

ATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing.

ATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing. F U R N I T U R E F I T T I N G S M A N U F A C T U R E R Twin-walled seel drawer. Complete Range of concealed runners up to 50 Kilos resistance. indamatic self closing and soft closing. Double wall 405

More information

Utensil sets. 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides. 21" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides

Utensil sets. 15 wide cabinets with 1-1/2 frames and 5/8 thick drawer sides. 21 wide cabinets with 1-1/2 frames and 5/8 thick drawer sides Utensil sets a 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 11-5/8" 6-1/8" 4-1/4" 18" Drawer length ZHI.457FI1A 21" Drawer length ZHI.533FI1A 21" wide cabinets with 1-1/2" frames and

More information

ZARGEN AND INTEGRA ZARGEN & INTEGRA STEEL DRAWER SYSTEMS.

ZARGEN AND INTEGRA ZARGEN & INTEGRA STEEL DRAWER SYSTEMS. ZARGEN AND INTEGRA ZARGEN & INTEGRA STEEL DRAWER SYSTEMS Zargen and Integra steel drawer systems provide flexibility to please the most demanding design needs. www.grassusa.com Zargen and Integra Drawer

More information

Furniture Fittings Concealed Hinges

Furniture Fittings Concealed Hinges Blum Clip Top Blumotion, opening angle 110 Material: Steel cup and arm : Screw fixing Installation: Door onto carcase without tools (Clip system) Adjustment: 3 dimensional (with appropriate mounting plate)

More information

STANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000

STANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000 STANDARD 430E Series Bottom mounted full extension drawer runners Specifications Runner 430E8000 430E7500 430E7000 430E6500 430E6000 430E5500 430E5000 430E4500 430E4000 430E3500 430E3000 430E2500 Nominal

More information

Selekta Pro 2000 Fast assembly hinges for office and commercial furniture

Selekta Pro 2000 Fast assembly hinges for office and commercial furniture Fast assembly hinges for office and commercial furniture 99 The program opening angles 180 and 270 with pre-mounted pan-head screws with eccentric height adjustment ± 2 mm with eccentric overlay adjustment

More information

STANDARD. Drawer runner program. Perfecting motion.

STANDARD. Drawer runner program. Perfecting motion. STANDARD Drawer runner program Perfecting motion STANDARD drawer runners Table of Contents Blum STANDARD drawer runners apply proven technology built upon years of experience to ensure a solid performance

More information

Functional movement systems for furniture in offices and public buildings. SINGLE-JOINT HINGES

Functional movement systems for furniture in offices and public buildings. SINGLE-JOINT HINGES SINGLE-JOINT HINGES Functional movement systems for furniture in offices and public buildings. QUALITY CERTIFICATE Reduced to the essentials. For us, that means focusing on quality, design and function.

More information

Hinges and Flap Fittings Information

Hinges and Flap Fittings Information Information METALLAMAT Adjustment options Lateral adjustment Adjusting on concealed hinge + mm Height adjustment Via mounting plates adjusting ± 2 mm Depth adjustment Adjusting on concealed hinge + 4 mm,

More information

ASSEMBLY HARDWARE ASSEMBLY HARDWARE. Installation and assembly hardware for professional efficiency

ASSEMBLY HARDWARE ASSEMBLY HARDWARE.   Installation and assembly hardware for professional efficiency ASSEMBLY HARDWARE ASSEMBLY HARDWARE Installation and assembly hardware for professional efficiency www.grassusa.com Installation and assembly aids for all product families designed to suit our customer

More information

CROWN IMPERIAL ASSEMBLY INSTRUCTIONS

CROWN IMPERIAL ASSEMBLY INSTRUCTIONS CROWN IMPERIAL ASSEMBLY INSTRUCTIONS Standard Drawer Box Page 1 of 14 Standard Drawer Box Parts Parts Supplied B C D A E F G Page 2 of 14 Part Letter Part Name Quantity 300-600 Deep Pan A Base Panel 1

More information

Functional movement systems for furniture in offices and public buildings. SINGLE-JOINT HINGES

Functional movement systems for furniture in offices and public buildings. SINGLE-JOINT HINGES SINGLE-JOINT HINGES Functional movement systems for furniture in offices and public buildings. QUALITY CERTIFICATE Reduced to the essentials. For us, that means focusing on quality, design and function.

More information

Standard drawer runner program

Standard drawer runner program Standard drawer runner program i 230M Single extension, Blumatic self-closing drawer runners s: 250mm (10") to 650mm (26") 230 series drawer runners Cabinet profile Drawer profile Rear mount sockets available

More information

Drawer slide technology with superior running conditions. Dynamic NT

Drawer slide technology with superior running conditions. Dynamic NT slide technology with superior running conditions System Information The slide of the superlatives. Superior concealed roller bearing slides for wooden drawer boxes. Full Extension and Full Access slides

More information

ACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports

ACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports ACCESSORIES ACCESSORIES Fasteners PMI has a variety of Fasteners and Connectors for any application. Euro-Bolts, Spiral Cam Connectors, Screws and Sleeves - we have your solution! Shelf Supports Assorted

More information

Locks and Catches Catches and Furniture Bolts

Locks and Catches Catches and Furniture Bolts Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701

More information

www.hafeleindia.com www.hafeleindia.com Silver Gold Rose Gold Graphite Dark Bronze PROFIN : ONE RANGE. MANY SOLUTIONS. 2. Stack Modular Shelving Pg. 23-32 3. Rail Door Profiles Pg. 33-41 1. Gola Profiles

More information

FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS

FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories

More information

FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS

FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories and ironmongery

More information

BAKA Protect Serie 2000 / Protect. BAKA Protect Series 2000 / The adjustable hinge system for timber entrance doors

BAKA Protect Serie 2000 / Protect. BAKA Protect Series 2000 / The adjustable hinge system for timber entrance doors Protect Serie 2000 / 4000 Protect BAKA Protect Series 2000 / 4000 The adjustable hinge system for timber entrance doors index BAKA Protect 2D BAKA Protect 2010 2D two-dimensionally adjustable up to 120

More information

Connector Technology, Shelf Supports Connection Fittings

Connector Technology, Shelf Supports Connection Fittings MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid

More information

Material Packing Brown Grey Pine Black White

Material Packing Brown Grey Pine Black White RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24

More information

Corner cabinet. Made for the corner!

Corner cabinet. Made for the corner! Corner cabinet Made for the corner! How do you best use the corner spaces in the kitchen and integrate this into your overall design? Our answer: The new corner cabinet solution using full extension TANDEMBOX.

More information

MOVEMENT SYSTEMS FITTINGS AND ACCESSORIES

MOVEMENT SYSTEMS FITTINGS AND ACCESSORIES MOVEMENT SYSTEMS FITTINGS AND ACCESSORIES We are where our customers are. Because we see customer proximity as an expression of our company culture. GRASS SOUTH AFRICA This catalogue consists of some products

More information

Assembly guide. Before you start...check the pack and make sure all the components and fixings are included see. Tools required (Not Supplied)

Assembly guide. Before you start...check the pack and make sure all the components and fixings are included see. Tools required (Not Supplied) M FITT-054 Issue - Issue Assembly guide Soft close 800 LH Pull & Swing Corner Unit Component parts Tools required (Not Supplied) B S O T Spirit level Cross Head Screwdriver Tape measure E&F J P* Allen

More information

Table and Furniture Base Fittings Plinth Adjusting Fittings

Table and Furniture Base Fittings Plinth Adjusting Fittings Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.

More information

MADE IN GERMANY. Developed & Manufactured By. Drawer Runner System.

MADE IN GERMANY. Developed & Manufactured By. Drawer Runner System. MADE IN GERMANY Developed & Manufactured By Drawer Runner System www.hafele.com MADE IN GERMANY Overview BASI SYSTEM Drawer sides with multi-functional benefi ts The Moovit drawer system provides completely

More information

AVENTOS. An inspiring range of lift systems.

AVENTOS. An inspiring range of lift systems. AVENTOS An inspiring range of lift systems www.blum.com 2 Ease of motion multitude of options The AVENTOS lift system brings ease of motion to the wall cabinet. Even large and heavy lift systems can be

More information

CLIP top BLUMOTION 107. The secret's inside even with a shallow boss drilling depth.

CLIP top BLUMOTION 107. The secret's inside even with a shallow boss drilling depth. CLIP top BLUMOTION 107 The secret's inside even with a shallow boss drilling depth www.blum.com CLIP top BLUMOTION 107 combines technology with convenience With CLIP top BLUMOTION 107 the secret's inside:

More information

STANDARD. Drawer runner program. Perfecting motion. blum.com

STANDARD. Drawer runner program. Perfecting motion. blum.com STANDARD Drawer runner program blum.com Perfecting motion Proven technology - built upon years of experience Blum testing criteria Cycle life/dynamic load capacity test Side pressure test 100,000 open/close

More information

TANDEM plus BLUMOTION

TANDEM plus BLUMOTION TANDEM plus BLUMOTION Premium Concealed Runners for Wood Drawers TANDEM plus BLUMOTION TANDEM plus BLUMOTION brings together all of the features, innovations and benefits that Blum has developed since

More information

Machines and assembly aids. Devices to efficiently install Blum hardware

Machines and assembly aids. Devices to efficiently install Blum hardware Machines and assembly aids Devices to efficiently install Blum hardware Table of contents Application Chart MINIPRESS Drawer BOX Assembly Cabinets Hinges Runners Systems Fittings Page 4 MINIDRILL 6 Machine

More information

Technical Product Description

Technical Product Description Worktops 5. Thickness material structure Front edge Bottom face coating 40 mm, 50 mm Laminate according to standard: EN 438 Wood pore or relief, matt or gloss 2 x Radius 3 mm, 6 mm or 8 mm depending on

More information

Simple, practical and economical. Largest range on the market. SlowMotion Zeta optional

Simple, practical and economical. Largest range on the market. SlowMotion Zeta optional 256 Affordable drawer system Simple, practical and economical Largest range on the market SlowMotion Zeta optional Uniset Uniset drawers are used by a very large base of Kitchen and bathroom manufacturers

More information

MOVENTO. The Evolution of Motion For 1/2" Drawer Material Thickness

MOVENTO. The Evolution of Motion For 1/2 Drawer Material Thickness The Evolution of Motion For 1/2" Drawer Material Thickness is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed

More information

AVENTOS lift system. AVENTOS HL lift up. Smooth motion for the lift up. Opening and closing easy and comfortable

AVENTOS lift system. AVENTOS HL lift up. Smooth motion for the lift up. Opening and closing easy and comfortable lift system Smooth motion for the lift up With HL, the one-part front lifts up parallel to the cabinet. This lift system is ideal for applications in high and wall cabinets with fronts above or in larder

More information

InnoTech drawer system

InnoTech drawer system InnoTech drawer system Technik für Möbel 115 User-friendly and utterly stylish Uniquely different sleek design and fine materials The outside of the drawer profile is classically straight, the smoothly

More information

COMPACT BLUMOTION. COMPACT BLUMOTION Face frame concealed hinges with integrated BLUMOTION.

COMPACT BLUMOTION. COMPACT BLUMOTION Face frame concealed hinges with integrated BLUMOTION. COMPACT BLUMOTION COMPACT BLUMOTION Face frame concealed hinges with integrated BLUMOTION www.blum.com/compact Innovative technology concentrated in a small space BLUMOTION inside Since the 1980s Blum

More information

Kitchen Fittings Hanging Cabinets and Accessories

Kitchen Fittings Hanging Cabinets and Accessories Cabinet hanger Knock-in version, load bearing capacity 130 kg/pair Depth adjustment Finish: Galvanized Concealed mounting of cabinet hanger behind the rear panel (Min. 16 mm free space required) Mounting

More information

Interior Equipment/Shop Fittings

Interior Equipment/Shop Fittings Interior Equipment/ Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Hook-in profile Eilox SHOPTEC Shopfitting system Wall channel Bracket Column Accessories

More information

MOVENTO. The Evolution of Motion

MOVENTO. The Evolution of Motion The Evolution of Motion is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed since first manufacturing drawer

More information

14/08/15 AVAILABLE FROM MIDRAND RANDBURG DURBAN UMHLANGA MARGATE CAPE TOWN GHANA

14/08/15 AVAILABLE FROM MIDRAND RANDBURG DURBAN UMHLANGA MARGATE CAPE TOWN GHANA 4/08/5 AVAILABLE FROM MIDRAND RANDBURG DURBAN UMHLANGA MARGATE CAPE TOWN GHANA PINETOWN BALLITO KRABY DROP DOWN with Kimana Hinges (pg 3) For further information: www.italianaferramenta.com > CATALOGUE

More information

METABOX METABOX. The versatile metal drawer system. blum.com

METABOX METABOX. The versatile metal drawer system. blum.com METABOX METABOX The versatile metal drawer system blum.com METABOX A drawer system with endless possibilities 2 Efficient storage in contemporary styling With METABOX, Blum offers an economical steel drawer

More information

SAMET SOFT CLOSE DRAWER SYSTEMS DRAWER SYSTEMS. Samet - Europe s Finest. (08) (03)

SAMET SOFT CLOSE DRAWER SYSTEMS DRAWER SYSTEMS. Samet - Europe s Finest. (08) (03) 9 CONTENTS SAMET SAMET SOFT CLOSE DRAWER 11 NEW SMART BOX 12 NEW SMART BOX FEATURES 13 NEW SMART BOX 99MM HIGH DRAWERS 16 NEW SMART BOX 155MM HIGH DRAWERS 18 NEW SMART BOX 219MM HIGH DRAWERS 20 IN-BOX

More information

Vanity Installation Instructions

Vanity Installation Instructions Vanity Installation Instructions Segments of these instructions will relate to your vanity. Please read these instructions thoroughly and ensure the appropriate instructions are used during the installation

More information

Transition Range Installation, Care & Adjustment Instructions

Transition Range Installation, Care & Adjustment Instructions Introduction The following instructions will enable you to complete the final assembly and adjustment of your new furniture. Hardware Box Each of the cabinets contains a Hardware box that contains all

More information

Steele TV Stand Stock # BH

Steele TV Stand Stock # BH LOT NUMBER: DATE PURCHASED: / / Steele TV Stand Stock # BH46-084-899-02 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store

More information

ALLORA SWING PANEL INSTALLATION INSTRUCTIONS

ALLORA SWING PANEL INSTALLATION INSTRUCTIONS ALLORA SWING PANEL INSTALLATION INSTRUCTIONS Before Installation Please check that your Allora Swing Panel is undamaged SEQUENCE OF INSTALLATION These instructions are also available from the Athena website:

More information

GEZE SLIDING DOOR SYSTEMS

GEZE SLIDING DOOR SYSTEMS GEZE Perlan 140 Multi-faceted uses with individual accessories The discrete design supports every required room effect and makes the sliding door system with its accessories a guarantee for elegant and

More information

EmagiKit. Privacy Pod Plus. Quiet. Easy. Affordable. INSTRUCTIONS ASSEMBLY

EmagiKit. Privacy Pod Plus. Quiet. Easy. Affordable. INSTRUCTIONS ASSEMBLY EmagiKit Privacy Pod Plus Quiet. Easy. Affordable. INSTRUCTIONS ASSEMBLY DIMENSIONS AND COMPONENTS 47 47 Ceiling Unit 2-B 2-L 2-R Glass Door Corner Trim Door Handle 90 Adjustable Height Work Surface 1-B

More information

v1.0 ASSEMBLY GUIDE Mia Wide Bookcase

v1.0 ASSEMBLY GUIDE Mia Wide Bookcase v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.

More information

ASSEMBLY GUIDE. Mia Narrow Bookcase

ASSEMBLY GUIDE. Mia Narrow Bookcase ASSEMBLY GUIDE Mia Narrow Bookcase Components: Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase. Step

More information

Allora ALCOVE ENCLOSURE INSTALLATION BEFORE INSTALLATION CHECK THAT YOUR ALLORA SHOWER ENCLOSURE SYSTEM IS UNDAMAGED

Allora ALCOVE ENCLOSURE INSTALLATION BEFORE INSTALLATION CHECK THAT YOUR ALLORA SHOWER ENCLOSURE SYSTEM IS UNDAMAGED Allora ALCOVE ENCLOSURE INSTALLATION BEFORE INSTALLATION CHECK THAT YOUR ALLORA SHOWER ENCLOSURE SYSTEM IS UNDAMAGED ALCOVE SHOWER Your shower can be installed to open Left hand or Right hand by rotating

More information

The complete solution: Internal organisation for ArciTech drawer systems

The complete solution: Internal organisation for ArciTech drawer systems The complete solution: Internal organisation for drawer systems OrgaTray 420 OrgaTray 420 Colour matched, plastic moulded tray to fit perfectly into a 94mm high drawer, nominal depths 450mm & 500mm. Silver

More information

Functional Hardware HINGES:

Functional Hardware HINGES: Functional Hardware»» One Stop Shop for all cabinet manufacturing hardware including hinges, slides, screws, door bumpers, shelf pins, catches and more»» Third Party Testing on hinges and slides to meet

More information

THE COMPLETE CABINET

THE COMPLETE CABINET THE COMPLETE CABINET ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE WELCOME TO ONE-STOP SHOPPING. THE ONLY ALUMINUM DOOR PROGRAM YOU LL NEED. This is

More information

THE COMPLETE CABINET

THE COMPLETE CABINET THE COMPLETE CABINET ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE WELCOME TO ONE-STOP SHOPPING. THE ONLY ALUMINUM DOOR PROGRAM YOU LL NEED. This is

More information

STANDARD runner system

STANDARD runner system runner system runner technology has proved itself time and time again over the years. It is the optimum entry level product for a functional wood furniture construction. The success of is based on a simple

More information

Installation Instructions

Installation Instructions by Plato Woodwork Installation Instructions Plato Woodwork, Inc. 200 Third Street SW P.O. Box 98 Plato, MN 55370 www.platowoodwork.com 800.328.5924 SECTION GUIDE GETTING STARTED PAGE # Installation Methods...

More information

Scandi - 2 Door 2 Drawer Tallboy

Scandi - 2 Door 2 Drawer Tallboy Scandi - Door Drawer Tallboy Assembly Instructions - Please keep for future reference 00 Dimensions Width : 8. cm Depth : 49.0 cm Height: 5.9 cm Assembly Instructions - Please keep for future reference

More information

LEGRABOX. Drawer Assembly and Removal. Drawer Assembly Step 1. Step 2. Step 3. Step 4. Step 5. Drawer Removal

LEGRABOX. Drawer Assembly and Removal. Drawer Assembly Step 1. Step 2. Step 3. Step 4. Step 5. Drawer Removal Drawer Assembly and Removal Drawer Assembly Step 1 Measure inside cabinet width (ICW) Use inside cabinet width (ICW) to calculate the drawer bottom and back dimensions. Formulas are found on the specification

More information

Technical product descriptions WORKTOPS STANDARD SLIM LINE. 1. Material thickness 38 mm. 2. Core/substrate material Chipboard

Technical product descriptions WORKTOPS STANDARD SLIM LINE. 1. Material thickness 38 mm. 2. Core/substrate material Chipboard Technical product descriptions WORKTOPS I STANDARD 1. 38 mm 2. Chipboard 3. Surface material Laminate (CPL, HPL) 4. Laminate thickness 0,6-0,8 mm 5. Surface structure Wood pore or relief, matt, gloss 6.

More information

Mia 4+2 Drawer Chest. Assembly Instructions - Please keep for future reference. White Dimensions

Mia 4+2 Drawer Chest. Assembly Instructions - Please keep for future reference. White Dimensions Mia + Drawer Chest Assembly Instructions - Please keep for future reference White 59586 Dimensions Width : Depth : Height: 88.5 cm. cm 90.0 cm Assembly Instructions - Please keep for future reference If

More information

aluminium profile system

aluminium profile system aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction

More information

assembly instructions

assembly instructions door opens outwards door opens inwards front cubicle door opens outwards or inwards with side panel seite 1 ensure that the supplied parts are complete by checking the packing list. make sure that tools

More information

Work smart with the SYSTEM. maja-moebel.de

Work smart with the SYSTEM. maja-moebel.de Work smart with the. maja-moebel.de VeRsAtILe storage solutions CReAtes the PeRFeCt WORKING environment Contemporary in design, the system office furniture beech, truffle oak, or, with co-ordinating fascia

More information

Door Hinges Drill-in Hinges

Door Hinges Drill-in Hinges Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2

More information

Simplex Baseboard System Baseboard System

Simplex Baseboard System Baseboard System Simplex Baseboard System Baseboard System I Complete installation programme I Trouble-free and time-saving installation I Various connection kits for all types of pipe Our service to you I Simplex Products

More information

Hinge Systems. Our technology adds movement and flexibility to furniture.

Hinge Systems. Our technology adds movement and flexibility to furniture. Our technology adds movement and flexibility to furniture. Hinge Systems Without the fitting, any item of furniture, no matter how attractive, fails to fulfill its purpose. This is the Hettich experience.

More information

www.hafeleindia.com www.hafeleindia.com INTRODUCTION Intuitive furniture is the need of the hour. In times like these where every extra square meter is considered as good as gold, installing versatile

More information

Mia Workdesk. Assembly Instructions - Please keep for future reference. White Dimensions

Mia Workdesk. Assembly Instructions - Please keep for future reference. White Dimensions Mia Workdesk Assembly Instructions - Please keep for future reference White 190 Dimensions Width : 1.5 cm Depth : 55.0 cm Height: 7.0 cm Assembly Instructions - Please keep for future reference If you

More information

Designed for Your Convenience

Designed for Your Convenience Table of Contents Intro & Blum Drawer Box Adjustments Removing Drawer Alignment Dimensions Glide Adjustments Front Adjustments Hinge Adjustments Removing s Full Overlay Inset Concealed (CH) Inset Revealed

More information

Art and Picture Hanging Rail Systems SYSTEMS. Display with Elegance

Art and Picture Hanging Rail Systems SYSTEMS. Display with Elegance Art and Picture Hanging Rail Systems SYSTEMS Display with Elegance Table of Contents Classic Rail +..... 1 Click Rail...... 4 Top Rail...... 8 Info Rail...... 10 Deco Rail...... 12 Wires and Hooks...................

More information

Assembly instructions

Assembly instructions AVENTOS HK-S Assembly instructions Required parts Lift mechanism set Set includes: Lift mechanism (qty 2) Cover plate (left and right) Also includes: SCHR 4X #7 x mm (-/8 ) wood screw (qty 0) Power factor

More information

PANIC BARS Marking IN ACCORDANCE WITH 1125:1997/A1:2001

PANIC BARS Marking IN ACCORDANCE WITH 1125:1997/A1:2001 PANIC BARS Marking IN ACCORDANCE WITH 25:997/A:200 Exclusive PININFARINA design Full adaptability in application Quick and easy installation Reliable and safe performance Tested up to 2.000.000 cycles

More information

MOVEMENT SYSTEMS FITTINGS AND ACCESSORIES

MOVEMENT SYSTEMS FITTINGS AND ACCESSORIES MOVEMENT SYSTEMS FITTINGS AND ACCESSORIES 03/2018 We are where our customers are. Because we see customer proximity as an expression of our company culture. GRASS SOUTH AFRICA This catalogue consists of

More information

New Sywell - Dresser and Stool

New Sywell - Dresser and Stool New Sywell - resser and Stool Assembly Instructions - Please keep for future reference 239/6994 259/7975 247/9684 258/7040 resser imensions Width - 77.5cm epth - 40cm Height - 74.5cm Stool imensions Width

More information

HOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use

HOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use Mitre saws with pull function HOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use Features soft start Base plate and rotating platen made of die cast aluminium, compact, rugged

More information

Scandi - 3 Door 5 Drawer Wardrobe

Scandi - 3 Door 5 Drawer Wardrobe Scandi - 3 Door 5 Drawer Wardrobe Assembly Instructions - Please keep for future reference 02250 Dimensions Width : 0.9 cm Depth : 9.0 cm Height: 9.3 cm Assembly Instructions - Please keep for future reference

More information

Program overview Group 8

Program overview Group 8 Program overview Group.1 Fittings for lightweight boards.1.0 -.1.1.2 Connecting fittings i Range summary.2.1.3 Adjustable fitting for head and foot ends / height adjustable leg / shelf supports / cabinet

More information

FlexFrame - Storage Components and Skins

FlexFrame - Storage Components and Skins FlexFrame - Storage Components and Skins 1/4 Square Drive Ball-Point Hex-Bit Socket 1/8 Short Hex, 1-1/2 Overall Length McMaster Part # 54075A44 Table of Contents Topic Page Storage Components 2 General

More information

Curium 19.4H Installation Instructions & Parts List

Curium 19.4H Installation Instructions & Parts List Curium 19.4H Installation Instructions & Parts List Illustration Curium 19.4H Right Hand Page 1 of 21 30/06/2016 Revision 1.0 IMPORTANT This shower screen / enclosure must be installed by suitably qualified

More information

RAILINGSYSTEMS PLANNING MANUAL EFFICIENCY DECIDES

RAILINGSYSTEMS PLANNING MANUAL EFFICIENCY DECIDES RAILINGSYSTEMS PLANNING MANUAL EFFICIENCY DECIDES THE SYSTEM The system that can even be without any load-bearing handrail... * With general technical approval (AbP) and certified type structural properties!

More information

STORAGE & SHELVING SYSTEM - INSTALLATION GUIDE

STORAGE & SHELVING SYSTEM - INSTALLATION GUIDE STORAGE & SHELVING SYSTEM - INSTALLATION GUIDE If you have ordered storage drawers, shelving, hanging rails or shoe racks this guide will help you install your storage and shelving system, together with

More information

Malibu - 3 Drawer 2 Door Robe

Malibu - 3 Drawer 2 Door Robe Malibu - 3 Drawer Door Robe ssembly Instructions - Please keep for future reference 7/83 38/3574 58/904 37/187 58/7679 79/1496 6/617 58/803 57/51 79/1960 55/7788 47/766 66/7355 49/661 78/5189 78/0830 Dimensions

More information

Curium 19H Installation Instructions & Parts List

Curium 19H Installation Instructions & Parts List Curium 19H Installation Instructions & Parts List Illustration Curium 19H Right Hand Page 1 of 15 01/07/2016 Revision 2.1 IMPORTANT This shower screen / enclosure must be installed by suitably qualified

More information

Connecting technology Summary of ranges

Connecting technology Summary of ranges Connecting technology Summary of ranges Lightweight connecting fittings Summary 758-759 Connecting fittings for carcases Summary 768-769 Other connecting fittings Summary 798-799 Adjustment systems for

More information

Preference Collection and Treatment Console INSTALLATION GUIDE

Preference Collection and Treatment Console INSTALLATION GUIDE Preference Collection 5580.69 and 5580.96 Treatment Console INSTALLATION GUIDE WARNING Failure to install the 5580 as described in this installation guide may cause the unit to collapse, resulting in serious

More information

SPECIAL HINGES. From flap hinges and mini-hinges to glass door hinges for direct mounting on the cabinet side wall.

SPECIAL HINGES. From flap hinges and mini-hinges to glass door hinges for direct mounting on the cabinet side wall. SPECIAL HINGES From flap hinges and mini-hinges to glass door hinges for direct mounting on the cabinet side wall. 0 GRASS THE CATALOGUE 0-0 SPECIAL HINGES Hinges for special applications. Where individual

More information

Osaka Dressing Table. Assembly Instructions - Please keep for future reference. White Black Dimensions

Osaka Dressing Table. Assembly Instructions - Please keep for future reference. White Black Dimensions Osaka Dressing Table Assembly Instructions - Please keep for future reference White 77 Black 81511 Dimensions Width : 101. cm Depth : 0.0 cm Height: 7.0 cm Assembly Instructions - Please keep for future

More information

TECHNOLOGY IN MOTION MACO TILT AND TURN FITTINGS. MULTI POWER fully concealed fittings INSTALLATION INSTRUCTIONS

TECHNOLOGY IN MOTION MACO TILT AND TURN FITTINGS. MULTI POWER fully concealed fittings INSTALLATION INSTRUCTIONS TECHNOLOGY IN MOTION MACO multi-matic TILT AND TURN FITTINGS INSTALLATION INSTRUCTIONS Key Sash rebate height Sash rebate width Tilt-only window 50 kg Maximum sash weight 2 Contents Applications/processing

More information

Devlila Apts., Shop No. 8, Fatema Nagar, Pune Tel.: Fax:

Devlila Apts., Shop No. 8, Fatema Nagar, Pune Tel.: Fax: Devlila Apts., Shop No. 8, Fatema Nagar, Pune 411013 Tel.: +91-20-56613638 Fax: +91-20-26812777 E- mail: sales@hanfas.com www.hanfas.com Product Catalogue Sliding Door Fittings Bottom Roller & Guide PVC

More information

Gallium 03 Installation Instructions & Parts List

Gallium 03 Installation Instructions & Parts List Gallium 03 Installation Instructions & Parts List Illustration Gallium 03, H1 Handle Left Hand: Open Out 04/05/2016 Revision 1.1 Page 1 of 19 IMPORTANT This shower screen / enclosure must be installed

More information

TIP-ON inside TIP-ON. The mechanical opening support system for handle-less doors. connect.blum.com

TIP-ON inside TIP-ON. The mechanical opening support system for handle-less doors. connect.blum.com TIP-ON inside TIP-ON The mechanical opening support system for handle-less doors connect.blum.com TIP-ON opens handle-less doors 2 Opening comfort for handle-less doors Handle-less furniture is becoming

More information

INTRODUCTION Tools Required Laminate Washroom Products... 4 DUCT PANELS Fixing the Frame: Fixing the Shadow Panels...

INTRODUCTION Tools Required Laminate Washroom Products... 4 DUCT PANELS Fixing the Frame: Fixing the Shadow Panels... Contents INTRODUCTION... 2 Tools Required... 3 Laminate Washroom Products... 4 DUCT PANELS... 4 Fixing the Frame:... 5 Fixing the Shadow Panels... 9 Fitting the Duct Panels:... 10 WASHSTATIONS... 15 Fixing

More information

Assembly and Installation Guide

Assembly and Installation Guide The Easy Hang Closet Solution SM Install Your elfa In An Instant. Enjoy The Benefits For A Lifetime. Basic Tools For elfa Assembly and Installation Level Hand or Power Drill Drill Bits 1/8", 3/8", 5/16"

More information

Merloni Elettrodomestici. Technical Fitting Manual FRIDGE. Language Issue/Edition Page GB /

Merloni Elettrodomestici. Technical Fitting Manual FRIDGE. Language Issue/Edition Page GB / GB 99-11-03/01 1-38 Index 1 CONFORMITY OF APPLIANCE 3 2 MAIN ASSEMBLY TYPES 3 2.1 Under worktop 3 2.2 Double door 10 2.3 Combined 14 2.4 Single door Fridge or single door Freezer 19 2.5 Combined free-standing

More information