Transition Range Installation, Care & Adjustment Instructions
|
|
- Norah Ellis
- 5 years ago
- Views:
Transcription
1 Introduction The following instructions will enable you to complete the final assembly and adjustment of your new furniture. Hardware Box Each of the cabinets contains a Hardware box that contains all of the fitments you need to complete the assembly of each unit. So parts do not get mixed up, please keep it safe with the unit it came with. Handle Fixing The rear of the Doors and Drawer fronts are pin pricked with small holes to guide the positioning of the handles Of course, should you wish to place your handles elsewhere, or if you have chosen a different model to the handle displayed then please ignore these positions and choose your own. To use the marked positions, simply drill through the fronts using a sharp 5mm diameter pointed drill bit and drill into a scrap piece of timber paced on the front side - this is to ensure that when the drill comes through the front the front surface it does so cleanly and it will also help protect you from the drill bit. Then simply attach the handle using the handle screws that are provided in the unit hardware box. 1. Drilling for Handle Holes 2. Fixing the Handle
2 Door Removal Whilst fitting you may want to remove the doors for safety To do so simply release the hinges by pushing the hinge's spring catch at position "C" to release the hinge arm Then Pull the hinge arm to the inside of the cabinet "C" "B" Door Fitting To re-fit the door hook the hinge onto the front of the hinge plate at position "A" Then Push the hinge arm at "C" onto the hinge plate, at position "B" "A"
3 Hinge & Door Adjustment Once your units are levelled and the doors are fitted, take a few minutes to level up all the doors to get that professionally fitted look. Doors can be levelled by using the adjustment screws on the hinges as shown below. Turn the screw nearest the front of the unit to adjust the door from side to side. By using a combination of adjustments using the top hinge and the bottom hinge the doors can easily be levelled. Loosen this screw only if you need to move the door forwards slightly You may need to slightly adjust the front screw as well to allow it to slide easily. Once all adjustments have been made the metal cover caps can be pushed into place to hide the screws. Hinge Door Fixing Screws With these loosened you can adjust the height of the door
4 Tall Storage Unit Shelf Stud Fitting & Shelf Positioning 3 Shelves in the tall unit are adjustable. The one between the doors is fixed Shelves are secured at the bottom of the unit for transit Simply pull away the transit plug or tape to release them. Decide where you want the shelves positioning and push the shelf studs in place as shown below The studs have small grips to the rear of the round peg so they grip tightly in place as the shelf is loaded with your Bathroom products To remove the shelf studs, remove the shelf first, then slightly lift the stud, to release the grip of the prongs and then pull forwards. The remaining holes can be filled with the small white hole cover caps. that are provided. Underside of Shelf Shelf Stud Alternative Shelf Position Holes
5 Tall Units - Fixing & Levelling Note: All Tall units must be fixed to the wall It is recommended that this is done by a suitably qualified installation professional. Rear View of Unit Wall Plates Wall plates are provided with all units. A pair of wall plates will be attached to the rear of the unit. Wall plates should be fitted at the heights shown, from the floor using screws and fixings appropriate to the walls being fixed to. Note: Wall screws & plugs are not supplied with the furniture. Arm of Hanging Bracket Cabinet Back Panel Wall Plate 55mm From the top of the unit Fixing Height Unit Levelling With the plates fitted to the wall, hook the units on them. Then from the inside of the unit adjust the brackets using the height adjustment screws shown below Tall Units = 1785mm From the floor recommended OR To suit your needs Cover Cap Fitting Once the units have been levelled the silver caps can be slid over the brackets to hide the fixings. TIP: Note the "hook shape" at "A", this slides into a groove on the top of the brackets. "A" Height Adjustment Screw Screw to tighten the unit to the wall Plastic Cover Adjustable Brackets Plastic Cover
6 Drawers Drawers are completely pre-assembled into the cabinets with the fronts attached, so you should not really need to remove them. However, if you do need to remove them, perhaps to assist whilst fitting, then here is what to do: Drawer Removal Reach underneath the drawer box on both sides, near the front and squeeze the plastic arms holding the drawer in place. With them squeezed simply pull the drawer towards you, upwards and out Push here to release Drawer Refitting To put the drawer back pull out each runner, place the drawer onto of the runners and simply close the drawer. The runners will clip and snap back into the clips that are on the underside of the drawer.
7 Vanity Drawer Unit - Wall Hanging To hang the Vanity units to the wall you will need to fix the supplied wall plate securely to the wall using at the 4 fixing points shown with fixings appropriate to your wall type. It is recommended that this is done by a suitably qualified installation professional as the unit with its drawer, basin and water will carry some considerable weight. With the wall plate secure, hook the arms of the brackets that are fixed to the unit into the position shown on each of the two brackets. You can now let go of the unit. Wall Plate Fixing Point Should you wish to release the bracket Push here, pushing the spring steel backwards with a pen, and lift the unit clear. Fixing Point Height Adjustment screw Fixing Point Levelling the Unit Fixing Point Tightening Screw With the unit in place you can now adjust it so it is level by adjusting the Height Adjusting screws and the Tightening screws. Top Fixing Once the unit is levelled you can position and fix the top to the unit This simply done by fixing through the two top rails and into the underside of the top
8 Vanity Unit Top Drilling The tops for the Vanity unit are delivered undrilled so you can fit the Vanity unit to the wall more comfortably and so it is easier for you to measure and drill the basin and tap holes to suit your requirements.
9 Transition Range Film Removal The sides, Tops and Fronts of all Transition furniture are covered with a tightly fitting clear protective plastic film to protect it during handling and fitting. Once installed carefully pick away at the edges of the furniture to loosen the film and then peel it off. This will reveal the beautiful matt surface finish underneath Once removed this may create a small amount of static that may attract dust to you may need to have an initial wipe with a moist cloth to remove that dust and eliminate the static charge. Care & Cleaning Care & Cleaning Transition furniture is made to the highest standards and by following the simple guidelines below will provide you with many years of enjoyable service. General: NEVER use products containing bleach, caustic soda or cleaners of a gritty or abrasive nature. This furniture is made of wood with the doors being made of MDF with a thick PVC coating and has a water resistant finish. However, it should not be left wet as this will damage the furniture. Furniture: Apart from regular wiping of the furniture units can be cleaned with a moist soft or micro fibre cloth. Any stubborn marks can be removed with diluted mild detergent e.g. washing up liquid. Mirrors & cabinets. Clean only with a micro fibre cloth, NEVER use glass and mirror cleaning products as these can mark the surface.
Vanity Cabinets and Mirrors Installation and User Guide
Vanity Cabinets and Mirrors Installation and User Guide MODEL NUMBERS 2451, 2452, 2454, 2455, 2457, 2459, 2453, 2456, 2458, 2460, 2470, 2473 Important :- Please quote the above model number(s) when ordering
More informationBathroom Installation Manual
Bathroom Installation Manual MAKING SPACE MORE VALUABLE May 2016 1 2 Contents page 1. Introduction Page 4 2. Tools required / key Page 5 3. Fittings Page 6 4. 600 cistern unit Page 7 5. 600 vanity unit
More informationFitted Furniture Installation and Aftercare Guide
Fitted Furniture Installation and Aftercare Guide Customer Service Contact Number 08008 778899 Important Information In the unlikely event that your product is damaged or faulty in any way, this must be
More informationProduct must be installed as shown using the screws and brackets provided. Use of incorrect hardware could result in damage to the product.
General Notes These installation instructions are intended to be comprehensive for a typical Keyeira/Presto configuration. Your configuration may differ. If you have questions contact Geiger Customer Service
More informationBathroom Installation Guide
Bathroom Installation Guide Please read instructions carefully and check products before starting. Products should be fitted/installed by an experienced and competent fitter, failure to do so may invalidate
More informationBATHROOM CABINETRY INSTALLATION GUIDE
L U X U R Y B A T H R O O M C A B I N E T S BATHROOM CABINETRY INSTALLATION GUIDE Illustrations may not reflect every exact model INSTALLATION INSTRUCTIONS Prior to installation Congratulations on purchasing
More informationHomestead Bar Cabinet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent s
88 5527 991 Homestead Bar Cabinet IMPRTANT NTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.
More informationPlease read these instructions before use and keep for future reference
Wardrobe Assembly Guide Allen Key Provided (if required) Philips Screwdriver Required Hammer Required Please read these instructions before use and keep for future reference Caution! Two Person Assembly
More informationWOOD GRAIN 6 SHELF BOOKCASE
HRDWRE 4 - wood dowels 20 - cam 8 - large 12 - shelf pins 4 - adhesive cam covers 20 - cams 8 - brackets Missing hardware? Please call 800.606.6387 for replacements. WLL MOUNTING HRDWRE 2 - small 2 - large
More informationSingle Mirror Cabinet
Single Mirror Cabinet Assembly Instructions - please keep for future reference YO886 464/3944 Dimensions Width - 35.5cm Depth - 16.5cm Height - 60cm Important Please read these instructions fully before
More informationCROWN IMPERIAL ASSEMBLY INSTRUCTIONS
CROWN IMPERIAL ASSEMBLY INSTRUCTIONS Standard Drawer Box Page 1 of 14 Standard Drawer Box Parts Parts Supplied B C D A E F G Page 2 of 14 Part Letter Part Name Quantity 300-600 Deep Pan A Base Panel 1
More informationNapoli - Shoe Storage
apoli - Shoe Storage ssembly Instructions - Please keep for future reference 93/6936 Dimensions Width - 80cm Depth - 33cm Height - 86cm MDE I RITI Important - Please read these instructions fully before
More informationPantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or oth
88 5076 691 Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have taken great
More informationVigilant Cigar Humidor Vault. Assembly Instructions
Vigilant Cigar Humidor Vault Assembly Instructions Models: 1000, 1500, and 2000 Congratulations! You have purchased a superior cigar humidor. These humidors have been specifically designed to properly
More informationSTORAGE & SHELVING SYSTEM - INSTALLATION GUIDE
STORAGE & SHELVING SYSTEM - INSTALLATION GUIDE If you have ordered storage drawers, shelving, hanging rails or shoe racks this guide will help you install your storage and shelving system, together with
More informationMirror Cabinets. Planning & Installation Information
Planning & Installation Information Mirror Cabinets Guideline Overview Homeowner Message Understand your role in the project. 2 Product Specification Selection of product and general product specifications,
More informationM MODULAR PARTS T01-A INSTALLATION INSTRUCTIONS MIRRORED CABINET W/DEFOGGER K-15512T , 2011 Copyright Kohler China Ltd.
M M MODULAR INSTALLATION INSTRUCTIONS ( ) MIRRORED CABINET W/DEFOGGER K-15512T BEFORE YOU BEGIN Please read these instructions carefully to familiarize yourself with the required tools, materials, and
More informationCloset System Installation Manual
Closet System Manual Thank you For choosing our Custom Closet Collection to fit all your needs Closets come fully assembled to make your project an enjoyable and satisfying experience. With quality Custom
More informationOhio Sideboard MADE IN BRITAIN. Assembly Instructions - Please keep for future reference 314/7128
Ohio - 6+2 Sideboard ssembly Instructions - Please keep for future reference 14/7128 Dimensions Width - 120cm Depth - 9.5cm Height - 78cm MDE IN RITIN Important - Please read these instructions fully before
More informationGENERAL FITTING INSTRUCTIONS FITTED
G07V1.1 U K GENERAL FITTING INSTRUCTIONS FITTED Important : Unpack the units carefully ensuring not to scratch them with the knife blade. Inspect every item carefully before installation as no claim for
More informationOhio - Bookcase MADE IN BRITAIN. Assembly Instructions - Please keep for future reference 343/2235
Ohio - ookcase Assembly Instructions - Please keep for future reference 343/35 Dimensions Width - 7cm Depth - 33cm Height - 183cm MADE IN RITAIN Important - Please read these instructions fully before
More informationmetal sided pot drawer soft close
Follow these instructions to install your parts and accessories. Things you need to know lways read the full instructions prior to installation. Make sure you leave plumbing and electrical work to qualified
More informationSUMMIT HUTCH ASSEMBLY HARDWARE WALL MOUNTING HARDWARE TOOLS REQUIRED COMPONENTS. 4 - large. 4 - bolts 4 - flat 4 - spring small screws.
SSEMBLY HRDWRE Missing hardware? Please call 800.606.6387 for replacements. 20 - small 4 - large 4 - bolts 4 - flat 4 - spring washers washers 8 - shelf pins 4 - cam 4 - cams 2 - connecting brackets WLL
More information600mm 3 drawer base cabinet
Follow these instructions to build and attach your cabinet. Things you need to know ase cabinets come with different positions for attaching your. If you are choosing the rebated back option make sure
More informationStuff-Your-Stuff Platform Bed (Twin and Full)
Stuff-Your-Stuff Platform Bed (Twin and Full) Pre-Assembly: Please read all instructions before beginning assembly. Assembly by two people is a must. Save all packing materials until assembly is complete
More informationPIVOT BUFFET HARDWARE TOOLS REQUIRED COMPONENTS. 8 - cams 8 - cam screws bolts 44 - flat washers shelf pins.
PIVOT BUFFET HRDWRE 8 - cams 8 - cam screws 44 - bolts 44 - flat washers 44 - spring washers 8 - screws 16 - shelf pins Thank you for purchasing the Pivot Buffet. This page lists all the contents included
More informationM MODULAR PARTS T01-A INSTALLATION INSTRUCTIONS MIRRORED CABINET SIMPLIFIED LEFT OPENING DOOR K-15512T-NL RIGHT OPENING DOOR K-15512T-NR
M M MODULAR INSTALLATION INSTRUCTIONS ( ) MIRRORED CABINET SIMPLIFIED LEFT OPENING DOOR K-1551T-NL RIGHT OPENING DOOR K-1551T-NR BEFORE YOU BEGIN Please read these instructions carefully to familiarize
More informationVenetia - Shoe Storage
Venetia - Shoe Storage ssembly Instructions - Please keep for future reference 06/576 33/603 ak White Dimensions Width - 80cm Depth - 33cm eight - 86cm MDE I RITI Important - Please read these instructions
More informationScandi - 3 Door 5 Drawer Wardrobe
Scandi - 3 Door 5 Drawer Wardrobe Assembly Instructions - Please keep for future reference 02250 Dimensions Width : 0.9 cm Depth : 9.0 cm Height: 9.3 cm Assembly Instructions - Please keep for future reference
More informationSteele TV Stand Stock # BH
LOT NUMBER: DATE PURCHASED: / / Steele TV Stand Stock # BH46-084-899-02 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store
More informationMalibu - 3 Drawer 2 Door Robe
Malibu - 3 Drawer Door Robe ssembly Instructions - Please keep for future reference 7/83 38/3574 58/904 37/187 58/7679 79/1496 6/617 58/803 57/51 79/1960 55/7788 47/766 66/7355 49/661 78/5189 78/0830 Dimensions
More informationP.O. Box 8400 Green Bay, WI (920)
P.O. Box 8400 Green Bay, WI 54308-8400 (920) 468-2165 Change Notice No. 112 Implemented By: KI-Pembroke Notification By: Scott Vissers Date: 03/15/10 Component Product Title: Series XXI Lateral Filing
More informationSection 1 Cubicles. Section 2 IPS Duct Panel Systems. Section 3 - Vanity Units Components & Assembly 12. Section 4 Basic Maintenance.
Contents Section 1 Cubicles Cubicle Components 3 Cubicle Installation 4-5 Cubicle Fittings Brackets 6 Hinges 7 Partition Support Leg 8 Indicator Bolt 9 Section 2 IPS Duct Panel Systems Frame, Flash & Panel
More informationDEVONSHIRE ELOSIS ORDERING INFORMATION PARTS INSTALLATION INSTRUCTIONS MIRROR CABINET. , 2005 Copyright Kohler China Ltd.
DEVONSHIRE ELOSIS INSTALLATION INSTRUCTIONS MIRROR CABINET BEFORE YOU BEGIN Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation sequences.
More informationC Cuisine Cart IMPORTANT NOTE
88 9001 001C Cuisine Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken
More informationAssembly Instructions Please keep for future reference Inspire 40
Assembly Instructions Please keep for future reference Inspire 40 Version 3 : 28/07/2014 Important - Please read these instructions fully before starting assembly ALR2902 Safety and Care Advice Important
More informationIMPORTANT: WILL NOT FIT COUNTRYMAN MODELS
Part #1410-0102-07 2 3 1 IMPORTANT: WILL NOT FIT COUNTRYMAN MODELS Apply masking tape around the bottom grille opening and across the bottom of the upper facto ry grille.. Open the hood and remove the
More informationBarnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratch
88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have
More informationB. Side Panel. E. Middle Panel 1 pc. 1 pc. 1 pc. S. Side Rack. 1 pc. T. Base Rack. U. Pipe 3 pcs. M6x35 Head Cap Bolt 14 pcs.
IMPORTANT 88 5089 95C Kitchen Cart Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly
More informationVanity Installation Instructions
Vanity Installation Instructions Segments of these instructions will relate to your vanity. Please read these instructions thoroughly and ensure the appropriate instructions are used during the installation
More informationScandi - 2 Door 2 Drawer Tallboy
Scandi - Door Drawer Tallboy Assembly Instructions - Please keep for future reference 00 Dimensions Width : 8. cm Depth : 49.0 cm Height: 5.9 cm Assembly Instructions - Please keep for future reference
More informationInstallation Instructions
by Plato Woodwork Installation Instructions Plato Woodwork, Inc. 200 Third Street SW P.O. Box 98 Plato, MN 55370 www.platowoodwork.com 800.328.5924 SECTION GUIDE GETTING STARTED PAGE # Installation Methods...
More informationOhio - TV Unit MADE IN BRITAIN. Assembly Instructions - Please keep for future reference 309/6561
Ohio - TV Unit ssembly Instructions - Please keep for future reference 09/6561 Dimensions Width - 120cm Depth - 9.5cm Height - 61.5cm MDE IN RITIN Important - Please read these instructions fully before
More informationINSTALLATION AND CARE GUIDE SOLUTIONS VANITY
INSTALLATION AND CARE GUIDE SOLUTIONS VANITY 059324 PRE-INSTALLATION Tools Required Materials Included 1 Vanity with leg option Materials Required 3 wood screws 1 2x4 beam cut to size Leg Options Cone
More informationVenetia - Shoe Storage
Venetia - Shoe Storage ssembly Instructions - Please keep for future reference 06/576 33/603 Oak White Dimensions Width - 80cm Depth - 33cm eight - 86cm DE I RITI Important - Please read these instructions
More informationPantry IMPORTANT NOTE
88 5022 69 Pantry IPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great
More informationINSTALLATION AND CUSTOMER CARE INFORMATION FOR SC FREESTANDING STERILIZATION CENTERS
INSTALLATION AND CUSTOMER CARE INFORMATION FOR SC144-200 FREESTANDING STERILIZATION CENTERS General Information: Many Artizan Design Free-standing Sterilization Centers are custom designed and built to
More informationWe put a lot of effort in the design and construction of our products to ensure they set the standard for quality, durability and ease of assembly.
ER CUSTOMER Thank you for purchasing your new piece of furniture from unelm. We put a lot of effort in the design and construction of our products to ensure they set the standard for quality, durability
More informationCanterbury 4 DRW CHEST
Canterbury 4 DRW CHEST Assembly Instructions - Please save for future reference 553/4801 565/2178 572/6080 25 kg 55 lbs 9 kg 20 lbs max. Dimensions Width - 84.3cm Depth - 41.9cm Height - 99.7cm Important
More informationTOOLS REQUIRED
VINTNER UFFET HRDWRE 16 - wood dowels 26 - back 16 - bolts 4 - pull bolts Thank you for purchasing the Vintner uffet. This page lists all the contents included in the box. Please take time to identify
More informationNEXUS SERIES CABINETS
NEXUS SERIES CABINETS STANDARD BASE ASSEMBLY INSTRUCTIONS Also applies to: Galaxy Series, Nexus Series, Ridgeline Series, Statesman Series, and Waterford Series FOR YOUR INFORMATION: These assembly instructions
More informationCabinet Storage Products
Assembly Instructions Storage Products (UltraStor, Acoustis, Adjustable Shelf, Cover Panels, Closure Panels) Wood Compartment Doors Full Wood Door Compartment Grille Doors Full Grille Door No Doors Contents
More informationINSTALLATION AND CARE INSTRUCTIONS
INSTALLATION AND CARE INSTRUCTIONS Vertical Applications Honeycomb Shades CONTENTS Introduction...2 Before You Begin...3 Vertical Application Parts Overview...4 Materials Required...5 Tools Required...6
More informationDisplay-Top Apothecary Cabinet. Assembly Instructions. Page 1
Display-Top Apothecary Cabinet Assembly Instructions Page 1 Display-Top Apothecary Cabinet Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean,
More informationINSTALLATION AND CUSTOMER CARE INFORMATION FOR SC FREESTANDING STERILIZATION CENTERS
INSTALLATION AND CUSTOMER CARE INFORMATION FOR SC120-200 FREESTANDING STERILIZATION CENTERS General Information: Many Artizan Design Free-standing Sterilization Centers are custom designed and built to
More informationINFINITE RANGE - HINGE DOOR
INFINITE RANGE - HINGE DOOR HINGE DOOR + 1 SIDE RETURN PANEL (CORNER) Please read these instructions before installing, as incorrect fitting will invalidate the guarantee-carry out each stage before moving
More informationELLIS SIDEBOARD. Pre-assembly preparation. Necessary Tools. John Lewis
John Lewis ELLIS SIDEBOARD Stock Number: 87702726 Thank you for purchasing this Ellis sideboard. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product.
More informationBathroom installation instructions
Bathroom installation instructions INSTLLTION INSTRUCTIONS Contents Important Note These fitting instructions refer to fitting Utopia Furniture to a solid wall. If your bathroom has studded walls, please
More informationAssembly Instructions
1 27694 Trend Podium Assembly Instructions #27694 Trend Podium Part Drawing Description Qty Part Drawing Description Qty P-1 Base 1 EA Hardware List Screw M6x12mm 30 EA P-2 Right Side Panel 1 EA A2 Phil
More informationCurium 19H Installation Instructions & Parts List
Curium 19H Installation Instructions & Parts List Illustration Curium 19H Right Hand Page 1 of 15 01/07/2016 Revision 2.1 IMPORTANT This shower screen / enclosure must be installed by suitably qualified
More informationNew Sywell - Dresser and Stool
New Sywell - resser and Stool Assembly Instructions - Please keep for future reference 239/6994 259/7975 247/9684 258/7040 resser imensions Width - 77.5cm epth - 40cm Height - 74.5cm Stool imensions Width
More informationCurium 19.4H Installation Instructions & Parts List
Curium 19.4H Installation Instructions & Parts List Illustration Curium 19.4H Right Hand Page 1 of 21 30/06/2016 Revision 1.0 IMPORTANT This shower screen / enclosure must be installed by suitably qualified
More informationINSTALLATION GUIDE. 1. Overview. 2. Measuring. 3. Tools & fixings you will need B C. Opening Width. Opening Height
INSTALLATION GUIDE Please take a few minutes to read through this guide before getting started. 1. Overview A Typical Sliding Wardrobe Door Layout A Frame - Top Liner (optional) B Top Track C Frame - Strike
More informationEMPEROR RECTANGULAR DINING TABLE + 4 FOLDING CHAIR. Important - Please read these instructions fully before starting assembly
EMPEROR RECTAGULAR G TABLE + FOLG CHAR Assembly nstructions - Please keep for future reference 60356 60357 G TABLE x FOLG CHAR x TABLE imensions Width - 39 cm epth - 7 cm Height - 75 cm CHAR imensions
More informationFrom all of us, thank you for choosing. John McDonald, Founder
Installation Manual From all of us, thank you for choosing This instruction manual was put together in the spirit of the Do-It-Yourself movement while simultaneously serving to help professionals understand
More informationFootprint Mobile Assembly Instructions
Footprint Mobile Assembly Instructions 1998754 Revision -1 Complete Series Master Packet If you have any questions concerning these instructions, please call Kimball Office Customer Service. 20 Kimball
More informationRight. Side Tower-Overhead Combination Revised 11/12/05 ON SITE A,B D,E C
Right ON SITE Side Tower-Overhead Combination Revised 11/12/05 2 Installation of Side Tower-Overhead Combination units is easy when the correct SEQUENCE is followed. 3 Your unit consists of the following
More information2x16L side mount pullout bin
ollow these instructions to install your parts and accessories. Things you need to know lways read the full instructions prior to installation. Consider possible obstructions to your parts & accessories,
More informationASSEMBLY INSTRUCTION FOR WYTHE BURLED WOOD BAR
ASSEMBLY INSTRUCTION FOR WYTHE BURLED WOOD BAR IMPORTANT SAFETY INSTRUCTIONS: Please read all instructions carefully before assembling. For your safety, assembly by two or more adults is strongly recommended.
More informationFor assembly see instructions in carton
88 5523 943 Kitchen Island IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have
More informationINSTALLATION AND CARE INSTRUCTIONS
INSTALLATION AND CARE INSTRUCTIONS Vertical Applications Honeycomb Shades 52 C8-10-3401 Rev 2/14 CONTENTS Introduction...2 Before You Begin...3 Vertical Application Parts Overview...4 Materials Required...5
More informationMISSION AUDIO STAND GBU
MISSION AUDIO STAND Thank you for purchasing our Mission Audio Stand. Assembly of this product requires a Phillips screwdriver and a hammer. We have found it helpful to have a second person present in
More informationWalton - Tall Cupboard
Walton - Tall upboard ssembly Instructions - Please keep for future reference 151/8113 Dimensions Width - 80.5cm Depth - 39cm eight - 152.5cm MD IN RITIN Important - Please read these instructions fully
More informationCABINETRY Assembly Instructions
www.hdicabinetry.com Assembly Instructions TABLE OF CONTENTS Category Page(s) Section 1: Framed Series Base Cabinet Instructions Wall Cabinet Instructions Easy Reach Cabinet Instructions 1.01-1.04 1.05-1.06
More informationLeft Unit. G. Shelf 1 pc. Small Cam Lock 6 pcs.(+1 extra) Cam Lock Screw 2 pcs.(+1 extra) Cam Lock Screw 6 pcs.(+1 extra)
88 5180 181 Art & Craft Computer Desk (Cottage Oak) IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring
More informationInstallation And Care Instructions. Vertical Honeycomb Shades
Installation And Care Instructions Vertical Honeycomb Shades Rev 5/2013 Table Of Contents Getting Started... 3 Parts Overview... 4 Materials Required... 5 Tools Required... 6 Outside Mount Installation...
More informationLANSDOWN 400MM FLOOR CUPBOARD (LAN400FC.LW/LAN400FC.PG) INSTALLATION AND AFTERCARE INSTRUCTIONS
LANSDOWN 400MM FLOOR CUPBOARD (LAN400FC.LW/LAN400FC.PG) INSTALLATION AND AFTERCARE INSTRUCTIONS Installation Procedure This unit can be joined to other units with furniture fixing bolts (not provided).
More informationSection 9: Finishing Touches - Other Decor Units
Section 9: Finishing Touches - Other Decor Units Butler Sink Units Important: This unit is designed to be used with either This unit is always used between other units. Level the units. Fix together and
More informationInstallation Site Preparation - Site Preparation
S c u l p t u r e s Bespoke Single Door / Bespoke Frameless Hinged Door + Inline Panel Instruction Manual Truelife Consumer Guarantee Please make sure the purchaser/end user completes and returns the Guarantee
More informationDubnium 11 Installation Instructions & Parts List
Dubnium 11 Installation Instructions & Parts List Illustration Dubnium, H1 Handle Right Hand: Open Out Page 1 of 25 IMPORTANT This shower screen / enclosure must be installed by suitably qualified individuals.
More informationLima - Corner TV Unit
Lima - orner TV Unit - Please keep for future reference 6/496 imensions Width - 9.5cm epth - 9cm Height - 51cm A IN RITAIN Important - Please read these instructions fully before starting assembly If you
More informationSideboard. Assembly Instructions - Please keep for future reference. 041 xx 5535
Sideboard ssembly Instructions - lease keep for future reference 041 xx 5535 Dimensions Width - 117.2cm Depth - 38.8cm eight - 73.6cm Important - lease read these instructions fully before starting assembly
More informationVertical Honeycomb Shades
Step by Step Installation Instructions Vertical Honeycomb Shades Customer Service 800.248.8888 or visit us online at smithandnoble.com Thank you for purchasing from Smith+Noble. Your new shades have been
More informationNewhalem Collection. Specification Sheets for Newhalem Vanities, Linen & Mirror. Specifications: SPECIFICATION VARIANCES
Newhalem Collection Specification Sheets for Newhalem Vanities, Linen & Mirror. SPECIFICATION VARIANCES Dimensions on finished vanities may vary slightly from those shown on these specification sheets
More informationINFINITE RANGE - CENTRE FOLDING DOOR
INFINITE RANGE - CENTRE FOLDING DOOR CENTRE FOLDING DOOR + 2 SIDE RETURN PANELS (PENINSULA) Please read these instructions before installing, as incorrect fitting will invalidate the guarantee-carry out
More informationINSTALLATION INSTRUCTIONS
INSTRUCTIONS FURNITURE SAPPHIRE Vanity BEFORE YOU BEGIN Please read these instructions carefully to familiarise yourself with the required tools, materials, and installation sequences. Follow the sections
More informationCorded Honeycomb Shades
Corded Honeycomb Shades Remove shade from package. Save packaging until shade is installed and working to your satisfaction. Level Tape Measure Pencil Power drill Screwdriver s for different mounting surface:
More informationSection 7. Microwave/compact oven... page 185 Microwave/compact oven with warming drawer... page 187. Fridge or freezer option...
Section 7 Midi tower shelf configurations Cabinet information How the cabinet is supplied... page 176 Additional shelf pack... page 177 Cabinet modifications... page 177 Hints and tips for installation..........................................
More informationRevised
Indentify Non-powered panels and separate from Powered panels. Non-powered panel shown at left.. Powered panel shown at left has powerway mounted at factory. Also separate panels by surface type, width
More informationRYAN 6 DRAWER TALLBOY PARTS LIST
RYAN 6 DRAWER TALLBOY Congratulations on your purchase of your RYAN 6 DRAWER TALLBOY. The RYAN Collection is made in New Zealand from 100% New Zealand made MDF an environmentally sound and renewable resource.
More informationMaintenance Guide 11/12
Product Maintenance Guide 11/12 C abinetry Care, Cleaning & Adjustment Guide After installation care After your cabinets have been installed, wipe down exteriors with a clean damp cloth. Work on a small
More informationPreference Collection 5580 Treatment Console INSTALLATION GUIDE
Preference Collection 5580 Treatment Console INSTALLATION GUIDE 0 WARNING Failure to install the 5580 as described in this installation guide may cause the unit to collapse, resulting in serious injury
More informationC. Side Panel 1 pc. B. Side Panel. 1 pc. J2. Shelf. 4 pcs. Adjustable Pin 24 pcs. (+1 extra) M3.5x16 Wood Screw 20 pcs. (+1 extra) 2 pcs.
IMPORTANT 20 05180 0307 Hutch Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly
More informationM. Door 1 Pc. 1 Pc. Door 1 Pc. 1 Pc. M3x20 Wood Screw (long) 8 Pcs. (+1 extra) M3x10 Wood Screw for Magnet 8 Pcs. (+1 extra)
88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have
More informationMedium Storage Unit. Assembly Instructions - Please keep for future reference 833/2471
Medium Storage Unit ssembly Instructions - lease keep for future reference 833/47 Dimensions Width - 3.5cm Depth - 30.cm Height - 9.cm Important - lease read these instructions fully before starting assembly
More informationa.k.a. casegoods instructions
a.k.a. casegoods instructions a a.k.a. workwall installation IMPORTANT NOTES Failure to install product according to installation instruction will result in loss of warranty. Tools required for assembly
More informationPRODUCT DESCRIPTION. Toulouse Gents Wardrobe White
PRODUCT DESCRIPTION Toulouse Gents Wardrobe White 1 DEAR CUSTOMER Thank you for purchasing your new piece of furniture from Dunelm. We put a lot of effort in the design and construction of our products
More informationAssembly Instructions
RoomScape Furniture System March 2013 - Bed Styles bed deck board bed deck board top cap top cap base glide middle side rail frame frame stacking device frame middle lower reinforcement side rail Single
More informationGardman Lean-to Greenhouse Assembly Instructions
Page 1 Gardman Lean-to Greenhouse Assembly Instructions Our Help Line provides support and advice to customers of Summer Garden Buildings after ordering. For advice before you buy you can phone us free
More informationD. Middle Panel. C. Middle Panel. 1 pc. B. Side Panel 1 pc. I. Back Stretcher. 1 pc. J. Front Stretcher. 1 pc. S. Door 1 pc. T.
itchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care
More information