WSS-Sliding Door Systems - SPRINT. Flexible and exclusive. Varied solutions for single and double leaf all-glass doors.
|
|
- Abraham Lindsey
- 5 years ago
- Views:
Transcription
1 - SPRINT Flexible and exclusive. Varied solutions for single and double leaf all-glass doors.
2 Limited partnership, based in DE Heiligenhaus, Local court Wuppertal, HRA Personal liable partner: WSS Limited Management Company and Heinz Wevers based in DE Heiligenhaus, local court Wuppertal, HRB Managing director: Guido Lücker, Robin Fasel Tax. N 0. DE / VAT We reserve the right for any misprints or other technical mistakes. We reserve the right to change any product features and dimensions at any time. Legal claims, no matter which kind, cannot be derived from using our document. The reprint of this document, also in parts, requires our written permission. The general terms and conditions can be viewed under Heiligenhaus, January 2012 Wilh. Schlechtendahl & Söhne GmbH & Co. K.G. 2
3 SPRINT - Slide Line Reliable quality. Max. leaf weight 150 kg Technical details from page 5 Sliding door system from page 8 SPRINT - Private Line Discreet design. Max. leaf weight 60 kg Technical details from page 13 Sliding door system from page 15 SPRINT - Business Line New opportunities. Max. leaf weight 180 kg Technical details from page 19 Sliding door system from page 22 SPRINT - Design Line Function and design. Max. leaf weight 100 kg Technical details from page 27 Sliding door system from page 29 Accessories and Information Lock, handles and accessories from page 32 Glass preparations from page 34 Materials and surface finishes from page 36 3
4 SPRINT - Slide Line 4
5 WSS-Sliding Door Systems SPRINT - Slide Line Features: Technical details: suitable for single and double leaf all-glass doors fixing of the side panels in/on the sliding track wall or ceiling installation high-quality aluminium surfaces or stainless steel finish manual bi-parting system (for double leaf doors) damped opening and closing SOFT-STOP (max. 100 kg) possibility for subsequent installation of the SOFT-STOP into existing system Glass: 8, 10 and 12 mm ESG (8,76 and 10,76 mm VSG) Leaf weight: max. 150 kg (ESG made from uncoated Float glass) Profile height: 120 mm Sliding track: drilled every 400 mm / Ø 6,5 mm Height adjustability: ± 5 mm (carrier) Test: cycles according to DIN EN 1527 / class 6 Corrosion protection: suitable for high-humidity environments according to DIN EN 1670 / class 4 use with Low-Energy-Drive possible Components: 1. sliding track, 2. sidepanel profile, 3. cover, 4. glass clamp/sidepanel, 5. carrier, 6. track stop The bi-parting system allows a synchronic movement of two leafs. The door is gently damped and guided into the final position using the SOFT-STOP. The Low-Energy-Drive automatically opens and closes the door at the push of a button. 5
6 SPRINT - Slide Line Sectional view: 47, H ± H H H X ± ,5 34,5 Sliding door leaf Sliding door leaf with sidepanel Calculation of the glass height: Sliding door leaf: H1 = H - 98 mm Sidepanel: H2 = H - 81 mm + insert into floor X Information: When using a sliding door leaf with sidepanel, please calculate an overlap of mm. 6
7 SPRINT - Slide Line Installation situations: Sliding door, single leaf Sliding door, single leaf with sidepanel / offset Sliding door system: Piece Sliding door set 1 please see page 8 Accessories: SOFT-STOP Low-Energy-Drive 1 please see page 9 Sliding door system: Piece Sliding door set 1 please see page 8 Sidepanel profile Accessories: SOFT-STOP Low-Energy-Drive 1 please see page 9 Sliding door, double leaf Sliding door, double leaf with sidepanels Sliding door system: Piece Sliding door set 2 please see page 8 Accessories: Bi-parting system SOFT-STOP Low-Energy-Drive 1 please see page 9 Sliding door system: Piece Sliding door set 2 please see page 8 Sidepanel profile Accessories: Bi-parting system SOFT-STOP Sliding door, single leaf with sidepanel / in-line Sliding door, double leaf / movable on one side Sliding door system: Piece Sliding door set 1 please see page 8 Sidepanel glass clamp Sliding door system: Piece Sliding door set 2 please see page 8 Track connector, bent Accessories: SOFT-STOP Low-Energy-Drive 1 please see page 9 Information: Bi-parting system, SOFT-STOP and Low-Energy-Drive can not be combined with each other. Accessories: Cover...page 9 Endcaps...page 9 Screen protection profile...page 11 Seals...page 11 Sliding door flush handles...page 32 Hook bolt lock...page 32 Strike plate...page 32 Strike box...page 33 Floor stop...page 33 Handles...page 33 7
8 SPRINT - Slide Line Sliding door set, for single leaf doors max. leaf weight 150 kg for 8-12 mm glass 1 sliding track, 2 carriers, 2 track stops, 1 floor guide Sliding track mm aluminium, E6/C-0 anodized mm aluminium, E6/C-0 anodized Information Sliding door set cut to size: Sliding track: Accessory-Set: Sidepanel profile for 8-12 mm glass installation on sliding track Length mm aluminium, mill finish cut to size aluminium, mill finish Sidepanel glass clamp for 8-12 mm glass installation in sliding track aluminium, mill finish Bi-parting system synchronous opening and closing of double leaf doors with wire rope, deflection pulleys and glass clamp plastic, natural Information leaf width: leaf weight: min. 500 mm, max mm max. 80 kg per leaf (recommendation) SOFT-STOP damped opening and closing max. leaf weight 100 kg single acting to fix in sliding track subsequent installation into existing systems (without dismantling) plastic, black Information single application: min. leaf width 580 mm double-sided application: min. leaf width 910 mm 8
9 SPRINT - Slide Line Low-Energy-Drive Low-Energy-Drive for opening and closing drive with gear belt and deflection pulleys (with glass clamp) with 2 covers, 250 mm length activated by start button control unit and power supply for installing in flushmounted box 250 Length cut to size aluminium, E6/C-0 anodized cut to size aluminium, E6/C 31 anodized Information leaf width: leaf weight: min. 500 mm, max mm max. 80 kg per leaf (recommendation) Cover to clip on with profile to accept screen protection profile and seals 47,8 2 Length mm aluminium, E6/C-0 anodized mm aluminium, E6/C 31 anodized mm aluminium, E6/C-0 anodized mm aluminium, E6/C 31 anodized mm aluminium, E6/C-0 anodized mm aluminium, E6/C 31 anodized cut to size aluminium, E6/C-0 anodized cut to size aluminium, E6/C 31 anodized Endcap 120 for sliding track for ceiling fixing aluminium, E4/C-0 anodized aluminium, E4/C 31 anodized 46 2 Endcap for sliding track for wall fixing aluminium, E4/C-0 anodized aluminium, E4/C 31 anodized 69,8 2 Endcap for sliding track with sidepanel profile / ceiling fixing aluminium, E4/C-0 anodized aluminium, E4/C 31 anodized 68 2 Endcap 120 for sliding track with sidepanel profile / wall fixing aluminium, E4/C-0 anodized aluminium, E4/C 31 anodized 9
10 SPRINT - Slide Line Sliding track Length mm aluminium, E6/C-0 anodized cut to size aluminium, E6/C-0 anodized Track connector, bent length: approx. 440 mm Execution right Execution left aluminium, E6/C-0 anodized right aluminium, E6/C-0 anodized Accessory-Set 2 carriers, 2 track stops, 1 floor guide floor guide available in three surface finishes Execution ESG Glass mm ESG aluminium, E6/C-0 anodized mm ESG aluminium, E1/C 31 anodized mm ESG aluminium, RAL 9005 coated ,76-10,76 mm VSG aluminium, E6/C-0 anodized ,76-10,76 mm VSG aluminium, E1/C 31 anodized ,76-10,76 mm VSG aluminium, RAL 9005 coated Information Carrier for ESG: No glass preparation necessary when using VSG made from 2 x ESG with pressure resistant inlayer. Carrier for VSG: Glass drilling necessary when using VSG made from 2 x ESG with standard PVB inlayer (please see page 34). Accessory-Set for timber doors 2 carriers, 2 track stops, 1 floor guide Timber min. 40 mm door thickness plastic, natural 10
11 SPRINT - Slide Line Carrier 28 Glass mm ESG aluminium, mill finish ,76-10,76 mm VSG aluminium, mill finish Execution ESG Information Carrier for ESG: No glass preparation necessary when using VSG made from 2 x ESG with pressure resistant inlayer. Carrier for VSG: Glass drilling necessary when using VSG made from 2 x ESG with standard PVB inlayer (please see page 34). Track stop adjustable holding force plastic, white Screen protection profile bottom screen protection profile to close the sidepanel profile in door area Length mm aluminium, E6/C-0 anodized mm aluminium, E6/C 31 anodized cut to size aluminium, E6/C-0 anodized cut to size aluminium, E6/C 31 anodized Brush seal Length mm plastic, natural Rubber swipe seal Length mm plastic, natural 11
12 SPRINT - Private Line
13 SPRINT - Private Line Features: suitable for single and double leaf all-glass doors use with sidepanel possible wall or ceiling installation high-quality aluminium surfaces or stainless steel finish damped opening and closing SOFT-STOP Technical details: Glass: 8 and 10 mm ESG Leaf weight: max. 60 kg (ESG made from uncoated Float glass) Profile height: 57 mm Sliding track: drilled every 400 mm / Ø 5,5 mm Height adjustability: ± 3,5 mm (carrier) Test: cycles according to DIN EN 1527 / class 6 Corrosion protection: suitable for high-humidity environments according to DIN EN 1670 / class Components: 1. sliding track, 2. cover, 3. carrier, 4. track stop left, 5. track stop right, 6. floor guide The door is gently damped and guided into the final position using the SOFT-STOP. 13
14 SPRINT - Private Line Sectional view: , H1 H ±3, X 25 H ±3, H1 H 34,5 Sliding door leaf Sliding door leaf with sidepanel Calculation of the glass height: Sliding door leaf: H1 = H - 43 mm Sidepanel: H2 = H - 37 mm + insert to floor X Information: When using a sliding door leaf with sidepanel, please calculate an overlap of mm. 14
15 SPRINT - Private Line Sliding door set, for single leaf doors max. leaf weight 60 kg for 8-10 mm glass for ceiling fixing 1 sliding track, 2 carriers, 1 cover, 2 track stops, 1 floor guide Sliding track mm aluminium, E6/C-0 anodized mm aluminium, E1/C 31 anodized mm aluminium, E6/C-0 anodized mm aluminium, E1/C 31 anodized Information Sliding door set cut to size: Sliding track: Cover: Accessory-Set: Sliding door set, for single leaf doors max. leaf weight 60 kg for 8-10 mm glass for wall fixing 1 sliding track, 2 carriers, 1 cover, 2 track stops, 1 floor guide Sliding track mm aluminium, E6/C-0 anodized mm aluminium, E1/C 31 anodized mm aluminium, E6/C-0 anodized mm aluminium, E1/C 31 anodized Information Sliding door set cut to size: Sliding track: Cover: Accessory-Set: ,5 51,8 Endcap 56 for sliding track with cover self-adhesive aluminium, E6/C-0 anodized aluminium, E1/C 31 anodized 2,5 69,3 Endcap 56 for sliding track with sidepanel and cover self-adhesive aluminium, E6/C-0 anodized aluminium, E1/C 31 anodized 15
16 SPRINT - Private Line SOFT-STOP damped opening and closing max. leaf weight 60 kg double acting with stop plastic, black Information leaf width: min. 840 mm glass preparation: page 34 38,3 Sliding track for ceiling fixing 57 Length mm aluminium, E6/C-0 anodized mm aluminium, E1/C 31 anodized cut to size aluminium, E6/C-0 anodized cut to size aluminium, E1/C 31 anodized 38,3 Sliding track for wall fixing 57 Length mm aluminium, E6/C-0 anodized mm aluminium, E1/C 31 anodized cut to size aluminium, E6/C-0 anodized cut to size aluminium, E1/C 31 anodized 55,3 Sliding track with sidepanel 57 53,8 Length mm aluminium, E6/C-0 anodized mm aluminium, E1/C 31 anodized cut to size aluminium, E6/C-0 anodized cut to size aluminium, E1/C 31 anodized 14 Information The sidepanel must be clamped or sealed on site. 16
17 SPRINT - Private Line 13,5 56 Cover Length mm aluminium, E6/C-0 anodized mm aluminium, E1/C 31 anodized cut to size aluminium, E6/C-0 anodized cut to size aluminium, E1/C 31 anodized 18, Screen protection profile with brackets bottom screen protection profile to close the sidepanel profile in door area Length mm aluminium, E6/C-0 anodized mm aluminium, E1/C 31 anodized cut to size aluminium, E6/C-0 anodized cut to size aluminium, E1/C 31 anodized Accessory-Set for 8-10 mm glass 2 carriers, 2 track stops, 1 floor guide floor guide availabe in three surface finishes aluminium, E6/C-0 anodized aluminium, E1/C 31 anodized aluminium, RAL 9005 coated 31,7 160 Carrier for 8-10 mm glass aluminium, E6/C-0 anodized , Track stop Execution left aluminium, E6/C-0 anodized right aluminium, E6/C-0 anodized Execution left 17
18 SPRINT - Business Line
19 SPRINT - Business Line Features: suitable for single and double leaf all-glass doors use with sidepanel possible wall or ceiling installation high-quality aluminium surfaces or stainless steel finish manual bi-parting system (for double leaf doors) damped opening and closing SOFT-STOP (max. 80 kg) Technical details: Glass: 8, 10 and 12 mm ESG (8,76, 10,76 and 12,76 mm VSG) Leaf weight: max. 180 kg (ESG made from uncoated Float glass) Profile height: 65 mm Sliding track ceiling: drilled every 200 mm / Ø 8,4 mm Sliding track wall: drilled every 340 mm / Ø 6,3 mm Height adjustability: ± 5 mm (carrier) Test: cycles according to DIN EN 1527 / class 6 Corrosion protection: suitable for high-humidity environments according to DIN EN 1670 / class Components: 1. sliding track, 2. cover, 3. carrier, 4. track stop, 5. floor guide The bi-parting system allows a synchronic movement of two leafs. The door is gently damped and guided into the final position using the SOFT-STOP. 19
20 SPRINT - Business Line Sectional view: t 10 H1 5 H Y t Y t Z 10 H H1 65 H 32 Sliding door leaf Sliding door leaf with sidepanel t (mm) Y (mm) 8 33,5 8, ,5 10, ,5 12,76 31 t (mm) Y (mm) Z (mm) 8 33,5 18,2 8, , ,5 16,2 10, , ,5 14,2 12, ,4 Calculation of the glass height: Sliding door leaf: H1 = H - 42 mm Sidepanel: H2 = H - 47 mm Information: When using a sliding door leaf with sidepanel, please calculate an overlap of mm. 20
21 SPRINT - Business Line Installation situations: Sliding door, single leaf Sliding door, single leaf with sidepanel / offset Sliding door system: Piece Sliding door set 1 please see page 22 Sliding door system: Piece Sliding track with sidepanel 1 please see page 24 Accessory-Set 1 please see page 25 Accessories: SOFT-STOP Sliding door, double leaf Sliding door, double leaf with sidepanels Sliding door system: Piece Sliding door set 2 please see page 22 Accessories: Bi-parting system SOFT-STOP Sliding door system: Piece Sliding track with sidepanel 1 please see page 24 Accessory-Set 2 please see page 25 Accessories: Bi-parting system Information: Bi-parting system and SOFT-STOP can not be combined with each other. Accessories: Endcaps...page 22 Screen protection profile...page 24 Insert profile...page 24 Seals...page 25 Sliding door flush handles...page 32 Hook bolt lock...page 32 Strike plate...page 32 Strike box...page 33 Floor stop...page 33 Handles...page 33 21
22 SPRINT - Business Line Sliding door set, for single leaf doors max. leaf weight 180 kg for 8-12 mm glass for ceiling fixing 1 sliding track, 2 carriers, 1 cover, 2 track stops, 1 floor guide Sliding track mm aluminium, E6/C-0 anodized mm aluminium, E6/C 31 anodized mm aluminium, E6/C-0 anodized mm aluminium, E6/C 31 anodized Information Sliding door set cut to size: Sliding track: Cover: Accessory-Set: Sliding door set, for single leaf doors max. 180 kg leaf weight for 8-12 mm glass for wall fixing 1 sliding track, 2 carriers, 1 cover, 2 track stops, 1 floor guide Sliding track mm aluminium, E6/C-0 anodized mm aluminium, E6/C 31 anodized mm aluminium, E6/C-0 anodized mm aluminium, E6/C 31 anodized Information Sliding door set cut to size: Sliding track: Cover: Accessory-Set: ,5 1 Endcap for sliding track with cover self-adhesive 64, aluminium, E6/C-0 anodized aluminium, E6/C 31 anodized 72,5 1 Endcap for sliding track with sidepanel profile self-adhesive 64, aluminium, E6/C-0 anodized aluminium, E6/C 31 anodized 22
23 SPRINT - Business Line Bi-parting system synchronous opening and closing of double leaf doors with wire rope, deflection pulleys and carrier plastic, natural 4 Information leaf width: leaf weight: min. 560 mm, max mm max. 80 kg per leaf (recommendation) SOFT-STOP damped opening and closing max. leaf weight 80 kg single acting with stop and tentacle , plastic, black Information single application: leaf width min. 785 mm double application: leaf width min mm Information Not appliable with sidepanel-profile! Sliding track for ceiling fixing Length mm aluminium, E6/C-0 anodized mm aluminium, E6/C 31 anodized cut to size aluminium, E6/C-0 anodized cut to size aluminium, E6/C 31 anodized Sliding track for wall fixing Length mm aluminium, E6/C-0 anodized mm aluminium, E6/C 31 anodized cut to size aluminium, E6/C-0 anodized cut to size aluminium, E6/C 31 anodized 23
24 64,5 WSS-Sliding Door Systems SPRINT - Business Line Sidepanel profile 21 23,5 64,5 Length mm aluminium, E6/C-0 anodized mm aluminium, E6/C 31 anodized cut to size aluminium, E6/C-0 anodized cut to size aluminium, E6/C 31 anodized 15 Cover 12 14,5 Length mm aluminium, E6/C-0 anodized mm aluminium, E6/C 31 anodized cut to size aluminium, E6/C-0 anodized cut to size aluminium, E6/C 31 anodized Screen protection profile bottom screen protection profile to close the sidepanel profile in door area 17,2 Length mm aluminium, E6/C-0 anodized mm aluminium, E6/C 31 anodized cut to size aluminium, E6/C-0 anodized cut to size aluminium, E6/C 31 anodized Insert profile screen protection to close the running way 28,9 1,6 Length mm aluminium, E6/C-0 anodized mm aluminium, E6/C 31 anodized cut to size aluminium, E6/C-0 anodized cut to size aluminium, E6/C 31 anodized 24
25 SPRINT - Business Line Accessory-Set 2 carriers, 2 track stops, 1 floor guide floor guide available in three surface finishes Execution ESG Glass mm ESG aluminium, E6/C-0 anodized mm ESG aluminium, E1/C 31 anodized mm ESG aluminium, RAL 9005 coated ,76-12,76 mm VSG aluminium, E6/C-0 anodized ,76-12,76 mm VSG aluminium, E1/C 31 anodized ,76-12,76 mm VSG aluminium, RAL 9005 coated Information Carrier for ESG: No glass preparation necessary when using VSG made from 2 x ESG with pressure resistant inlayer. Carrier for VSG: Glass drilling necessary when using VSG made from 2 x ESG with standard PVB inlayer (please see page 34). Carrier Glass mm ESG zinc casting, mill finish ,76-12,76 mm VSG zinc casting, mill finish Execution ESG Information Carrier for ESG: No glass preparation necessary when using VSG made from 2 x ESG with pressure resistant inlayer. Carrier for VSG: Glass drilling necessary when using VSG made from 2 x ESG with standard PVB inlayer (please see page 34). Track stop zinc casting, mill finish Brush seal Length mm plastic, natural Rubber swipe seal Length mm plastic, natural 25
26 SPRINT - Design Line
27 SPRINT - Design Line Features: suitable for single and double leaf all-glass doors wall or glass installation ceiling fixation on request stainless steel V2A, brushed simple glass preparation Technical details: Glass: Leaf weight: Track: Height adjustability: Test: 8, 10 and 12 mm ESG max. 100 kg (ESG made from uncoated Float glass) Ø 25 mm ± 2,5 mm (eccentric suspensions) cycles according to DIN EN 1527 / class Components: 1. track with wall fixing, 2. carriers, 3. endstops, 4.floor guide, 5. floor stop The holders allow a fast and secure wall installation of the track (track with wall fixing). The clamping surfaces optimally disperse the pressure to the glass (track with glass fixing). 27
28 SPRINT - Design Line Sectional view: Ø ,5 Ø 21 Ø 60 Ø 51,4 ± 2, Wall fixing Glass fixing 28
29 SPRINT - Design Line Sliding door set, for single leaf doors max. leaf weight 100 kg for 8-12 mm glass 1 track with wall fixing, 2 carriers, 2 endstops, 1 floor guide, 1 floor stop Track mm stainless steel V2A, brushed mm stainless steel V2A, brushed mm stainless steel V2A, brushed mm stainless steel V2A, brushed Information Sliding door set cut to size: Track with wall fixing: Accessory-Set: Information Glass preparation: page 34 Sliding door set, for single leaf doors max. leaf weight 100 kg for 8-12 mm glass 1 track with glass fixing, 2 carriers, 2 endstops, 1 floor guide, 1 floor stop Track mm stainless steel V2A, brushed mm stainless steel V2A, brushed mm stainless steel V2A, brushed mm stainless steel V2A, brushed Information Sliding door set cut to size: Track with glass fixing: Accessory-Set: Information Glass preparation: page Track with wall fixing Ø 25 mm with plugs Length mm stainless steel V2A, brushed mm stainless steel V2A, brushed mm stainless steel V2A, brushed mm stainless steel V2A, brushed cut to size stainless steel V2A, brushed 29
30 SPRINT - Design Line Track with glass fixing Ø 25 mm with plugs Length mm stainless steel V2A, brushed mm stainless steel V2A, brushed mm stainless steel V2A, brushed mm stainless steel V2A, brushed cut to size* stainless steel V2A, brushed Information Glass preparation: page 35 *) When ordering sliding door systems cut to size, WSS provides an individual drawing of the glass preparation. Accessory-Set for 8-12 mm glass 2 carriers, 2 endstops, 1 floor guide, 1 floor stop stainless steel V2A, brushed Information Glass preparation: page 34 Ø 59,5 Carrier Ø ± 2,5 for 8-12 mm glass stainless steel V2A, brushed Information Glass preparation: page Ø25 Endstop stainless steel V2A, brushed 25 Ø15 3/7/15/22 Wall spacer Ø6,1 Execution mm stainless steel V2A, brushed mm stainless steel V2A, brushed mm stainless steel V2A, brushed mm stainless steel V2A, brushed 30
31 Accessories and Information 31
32 Lock, Handles and Accessories 11 Sliding door flush handles for 8-12 mm glass Ø41 Ø aluminium, E4/C-0 anodized aluminium, E4/C 31 anodized stainless steel V2A, brushed Information Glass preparation: page Sliding door flush handles for 8-10 mm glass adhesive bonding stainless steel V2A, brushed Information Glass preparation: page Hook bolt lock for 8-12 mm glass prepared for profile cylinder aluminium, E4/C-0 anodized aluminium, E4/C 31 anodized stainless steel V2A, brushed Information Glass preparation: page Strike plate stainless steel V2A, brushed
33 Lock, Handles and Accessories Strike box for 8-12 mm glass aluminium, E4/C-0 anodized aluminium, E4/C 31 anodized stainless steel V2A, brushed Information Glass preparation: page Floor guide for 8-12 mm glass adjustable 50 34, aluminium, E6/C-0 anodized aluminium, E1/C 31 anodized aluminium, RAL 9005 coated Floor stop for 8-12 mm glass adjustable aluminium, E6/C-0 anodized aluminium, E1/C 31 anodized aluminium, RAL 9005 coated Ø30 Handles straight form back to back fixing for 8-19 mm glass L GL GL L stainless steel V2A, brushed stainless steel V2A, brushed stainless steel V2A, brushed stainless steel V2A, brushed cut to size* cut to size stainless steel V2A, brushed Information Glass preparation: page *) The max. length is mm when using 2 fixing points. For lengths of more than mm, we recomment 3 fixing points. 33
34 WSS-Sliding Door Systems Glass Preparations SPRINT - Slide Line Carrier (VSG) ,5 Ø10 SPRINT - Private Line SOFT-STOP leaf width min max.r10 SPRINT - Business Line Carrier (VSG) Ø SPRINT - Design Line Carrier leaf width 90 Ø22 Ø22 34
35 Glass Preparations SPRINT - Design Line Track with glass fixing Track length Track holder Size X Piece Piece Piece Piece 590 track length 90 X X X X Ø22 Accessories Ø50 R L Ø18 Sliding door flush handles Hook bolt lock Strike box Handles
36 Material and Surface Finishes STEEL 005 = mill finish 010 = galvanized 099 = special colours ALUMINIUM Anodizing after Euras standard colour swatch and standard coating (dip colouring) 105 = mill finish 112 = E4/C-0 silver 114 = E6/C-0 silver 122 = E4/EV 2 champagne 124 = E6/EV 2 champagne 127 = E4/EV 3 similar brass 129 = E6/EV 3 similar brass 132 = E4/S5/EV 5 similar gold 134 = E6/S5/EV 5 similar gold 136 = E1/C 31 similar stainless steel V2A 137 = E4/C 31 similar stainless steel V2A 139 = E6/C 31 similar stainless steel V2A 142 = E4/C 32 light bronze 144 = E6/C 32 light bronze 147 = E4/C 33 medium bronze 149 = E6/C 33 medium bronze 152 = E4/C 34 dark bronze 154 = E6/C 34 dark bronze 157 = E4/C 35 black 159 = E6/C 35 black 174 = polished chrome 198 = stainless steel V2A finish 199 = special anodized Powder coating 250 = RAL 9010 pure white 255 = RAL 9016 traffic white 265 = RAL 9005 jet black 299 = special coating BRASS 305 = mill finish 310 = galvanized 316 = polished, without lacquer 318 = polished, with lacquer 325 = matt nickel plated 326 = matt brushed, without lacquer 328 = matt brushed, with lacquer 350 = RAL 9010 pure white 355 = RAL 9016 traffic white 372 = satin chrome 374 = polished chrome 376 = velour nickel plated 399 = special colours STAINLESS STEEL V2A 405 = mill finish 416 = polished 426 = brushed 499 = special colours PLASTIC 505 = natural 550 = white 565 = black 599 = special colours ZINC CASTING 705 = mill finish 725 = matt nickel plated 730 = silver 750 = RAL 9010 pure white 755 = RAL 9016 traffic white 770 = RAL 9005 jet black 772 = satin chrome 773 = stainless steel V2A finish 774 = polished chrome 799 = special colours GLASS 805 = clear PRE-TREATMENT E1 E2 E3 E4 E5 E6 = linished = brushed = polished = linished and brushed = linished and polished = chemical etched Information: The selection of available materials and surfaces can differ from each product. For details, please see price list. Different materials and treatments cause slight differences in colour. These examples of colours are only for your guidance. Differences in colour are determined by the printing. Further surface finishes are available. If required, please contact our sales department. Articles manufactured in different materials, can slightly differ from the dimensions shown in the images. 36
37 Material and Surface Finishes ALUMINIUM E4/C-0 silver E4/EV 2 champagne E4/EV 3 similar brass E4/S5/EV 5 similar gold E4/C 31 similar stainless steel E4/C 32 light bronze E4/C 33 medium bronze E4/C 34 dark bronze polished chrome stainless steel finish STAINLESS STEEL brushed polished
38 Locks and Fittings for Glass General Survey Basic Catalogue Brochures Locks and Fittings for Glass The general catalogue contains all products for interior and exterior doors. STUDIO - Private Line Infinitely adjustable, extremely stable. The innovative locks with Polyisocyanat-Spring components. STUDIO Loft - Private / Business Line The innovative and newly designed locks for the private and commercial sector. All-in solutions for escape doors The innovative locks for emergency exit doors (DIN EN 179) and panic doors (DIN EN 1125). 38
39 Locks and Fittings for Glass General Survey Brochures SELCO Self-closing double action door hinges The new door hinges for interior doors in the private and commercial sector. Max. door weight 70kg. MARE - Wellness Line The innovative stainless steel V2A shower fittings.design and transparency. cleanic New solutions for health and hygiene. Locks and Fittings for exterior doors Flexible and logical: Reassuring and reliable security for All-Glass Constructions. 39
40 WILH. SCHLECHTENDAHL & SÖHNE GMBH & CO K.G. Mozartstraße 4-12 DE Heiligenhaus P.O. Box /62 DE Heiligenhaus Phone: +49 (0) 20 56/ 17-0 Fax: +49 (0) 20 56/51 42 Web: K w-0070_kat_sprint-schiebetürsysteme_en_01 01/2012 Wilh. Schlechtendahl & Söhne GmbH & Co.K.G.
General Information CONTENTS. Sales promotion Code of material and surface finishes 352. Examples of colours 353.
CONTENTS Sales promotion 350-351 Code of material and surface finishes 352 Examples of colours 353 Imprint 354 Sales promotion Sample display ca. 350 x 400 mm STUDIO - Private Line 99.100.0400. Sample
More informationHardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
More informationKWS Handrail Systems. Architectural Hardware
KWS Handrail Systems Architectural Hardware Technical Information KWS Handrail-Systems - the flexible solution System for handrails in stainless steel and timber Completely pre-assembled or single components
More informationBAKA Protect Serie 2000 / Protect. BAKA Protect Series 2000 / The adjustable hinge system for timber entrance doors
Protect Serie 2000 / 4000 Protect BAKA Protect Series 2000 / 4000 The adjustable hinge system for timber entrance doors index BAKA Protect 2D BAKA Protect 2010 2D two-dimensionally adjustable up to 120
More informationLocks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
More informationDoor Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
More informationOrganisational Kitchen Fittings Kitchen Cabinet Accessories
Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationSliding Door Hardware-Glass Bottom Rolling System
Sliding Door Hardware-Glass Silent Aluflex 0 Maximum door weight: 0 kg ( lbs.) Maximum internal height:,500 mm (9 / ) Mullions are recommended for doors taller than 000 mm ( 3/ ) Door width: 500 500 mm
More informationHardware Fitting Accessories Door Seals
Areas of application Protection against cold, draught and vermin Reduces light leakage, sound insulation Smoke control, fire resistance Reduces the energy consumption of air conditioning systems (see following
More informationInterior Equipment/Shop Fittings
Interior Equipment/ Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Hook-in profile Eilox SHOPTEC Shopfitting system Wall channel Bracket Column Accessories
More informationSilent Aluflex 80 Sliding door system: A wealth of options for peoples who want the best
Silent Aluflex 80 Sliding door system: A wealth of options for peoples who want the best Escape the mundane and discover something special: Unusual inspirations and surprising solutions for your space
More informationJ; ('& ): J; )'& ): J; +'& ): J; +(+ ): J;,)& ): 9WXb[ i[j J;9JKI <_n_d] <P%' '& <_n_d] IP 7ii[cXbo 7Z`kijc[dj 9WbYkbWj_ed \ehckbwi
INdex ZERTIFIZIERT 4 INTERIOR DOOR SIMONSWERK TECTUS TE 210 3D for unrebated and rebated, flush-faced quality doors Hinge up to 40 kg Technical Data Load capacity Length (leaf/frame) Width (leaf/frame)
More informationTable and Furniture Base Fittings Table Legs and Table Bases
Square Stainless steel coloured laquered square Bright laquered square Area of application: For table and coffee tables Material: Plastic glide Finish/Colour: Table leg brushed, glide black Cross section:
More informationUniversal ARCOS EA. Patch Fittings
Universal ARCOS EA Patch Fittings Product range 4 5 DORMA Universal 6 25 ARCOS Universal 26 33 DORMA EA 34 39 Accessories 40 50 Metric/English Conversion Guide 51 3 DORMA Product Range DORMA Patch fittings
More informationDoor accessories. Hinges Accessories Grab rails Door plates Information Signage
Door accessories Hinges Accessories Grab rails Door plates Information Signage Hinges 4 Accessories 8 Grab rails 11 Door plates 12 Information signage 16 Hinges DBB-SS-009 Two Ball Bearing Butt Hinge
More informationGEZE SLIDING DOOR SYSTEMS
GEZE Perlan 140 Multi-faceted uses with individual accessories The discrete design supports every required room effect and makes the sliding door system with its accessories a guarantee for elegant and
More informationTECTUS. The completely concealed hinge system
The completely concealed hinge system index te 210 3d up to 40 kg 4 te 310 3d up to 60 kg 5 te 510 3d up to 100 kg 6 TE 525 3D up to 100 kg 7 te 630 3d up to 200 kg 8 Cable set TECTUS Accessories 9 Fixing
More informationHCS the HOPPE Compact System. for all HOPPE door- and window handles!
HCS the HOPPE Compact System for all HOPPE door- and window handles! HCS the HOPPE Compact System...... is a unique product developed by HOPPE. ... opening, closing and locking all in one HCS the HOPPE
More informationCabinet Rim lock, Push Button type, - 25 mm backset Page 2-3
Izerwaren Order numbers 25.191. Cabinet Rim lock, Push Button type, - 25 mm backset Page 2-3 Cabinet Rim lock, backset 25 mm - 1 Minimum door thickness 19 mm ~3/4 Strike plate not included with lock Both
More informationTECTUS - New Versions. New Versions. The completely concealed hinge system
TECTUS - New Versions New Versions The completely concealed hinge system index te 240 3d up to 40 kg 6 te 340 3d up to 80 kg 7 TE 540 3D up to 120 kg 8 TE 640 3D up to 200 kg 9 TE 540 3D A8 up to 100 kg
More informationHinges and Flap Fittings Information
Information METALLAMAT Adjustment options Lateral adjustment Adjusting on concealed hinge + mm Height adjustment Via mounting plates adjusting ± 2 mm Depth adjustment Adjusting on concealed hinge + 4 mm,
More informationDrake & Wrigley s extensive range of architectural hardware is produced entirely in commercial grade nonferrous metals, primarily solid brass, zinc and stainless steel. A wide choice of colours can also
More informationLift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge Pivot door
More informationKitchen Fittings Hanging Cabinets and Accessories
Cabinet hanger Knock-in version, load bearing capacity 130 kg/pair Depth adjustment Finish: Galvanized Concealed mounting of cabinet hanger behind the rear panel (Min. 16 mm free space required) Mounting
More informationSPECIAL HINGES. From flap hinges and mini-hinges to glass door hinges for direct mounting on the cabinet side wall.
SPECIAL HINGES From flap hinges and mini-hinges to glass door hinges for direct mounting on the cabinet side wall. 0 GRASS THE CATALOGUE 0-0 SPECIAL HINGES Hinges for special applications. Where individual
More informationSIKU RB. The knuckle hinge system for PVCu entrance doors
SIKU RB The knuckle hinge system for PVCu entrance doors index SIKU RB RB 5010 3D up to 120 kg drilling position 10.0 mm 4 RB 5015 3D up to 120 kg drilling position 11.5 mm 5 RB 5020 3D up to 120 kg drilling
More informationTECTUS. The completely concealed hinge system
TECTUS The completely concealed hinge system It s still design even if there s nothing to be seen! TECTUS This Latin word for concealed signifies SIMONSWERK s newly developed, completely hidden hinge system.
More information77 cm. 5243/3-GA (3 pcs.) 5243/3-BO (3 pcs.)
ARCHIMEDE ST.102-4ENG SPECIFICATION Range: ARCHIMEDE Design: Caimi Lab 5203-GA, 5203-BO, 5213-GA, 5213-BO, 5223-GA, 5223-BO, 5233/3-GA, 5233/3-BO, 5241/3-GA, 5241/3-BO, 5243/3-GA, 5243/3-BO, 5245/3-GA,
More informationRAILINGSYSTEMS PLANNING MANUAL EFFICIENCY DECIDES
RAILINGSYSTEMS PLANNING MANUAL EFFICIENCY DECIDES THE SYSTEM The system that can even be without any load-bearing handrail... * With general technical approval (AbP) and certified type structural properties!
More informationType of system: fully automated operation
Type of system: fully automated operation Element types Pivotable end panel: Standard element: Door with frame: Fully automated drive and locking. Fully automated travel With an integrated door closer
More informationFolding sliding doors
Folding sliding doors Standard program overview Folding sliding doors Folding sliding doors single and double-skinned Product Dimensions in mm width/height Leaf thickness Min. headroom Min. lateral projection
More informationK15.13 FACE FIXED DOOR HINGES K15 DOORS
K15 DOORS K15.13 01.02.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General... K15.13.03 2. 2-part hinge...
More informationMortise Locks. European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications
2 Mortise Locks 2 c 3 4 6 9 22 24 European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications 2016 02 2 FSB North America European Mortise Lock
More informationCatalogue. Locks for aluminium. The global leader in door opening solutions
Catalogue Locks for aluminium The global leader in door opening solutions Summary Locks for aluminium 1 POINT LOCKS............................................................ 2 3 POINTS LOCKS...........................................................
More informationSection 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie .
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS Web. acrylicdesign.ie Email. sales@acrylicdesign.ie Acrylic Design 2004-2015 Mobile Cable System Components Single panel clamp Stand Off for
More informationargenta opening doors
invisible hinges Content Invisible neo... 4 Invisible... 12 Invisible Pro XS4... 20 Pivotica Pro... 26 Pivotica... 32 Magnotica... 36 CONCEALED HINGES To strive for an aesthetic design for both rotating
More informationFEET, WHEELS, FLOOR FASTENINGS, SUPPORTS
SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT
More informationTHE COMPLETE CABINET
THE COMPLETE CABINET ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE WELCOME TO ONE-STOP SHOPPING. THE ONLY ALUMINUM DOOR PROGRAM YOU LL NEED. This is
More informationNEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
More informationTHE COMPLETE CABINET
THE COMPLETE CABINET ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE WELCOME TO ONE-STOP SHOPPING. THE ONLY ALUMINUM DOOR PROGRAM YOU LL NEED. This is
More informationHardware Fitting Accessories
Hardware Fitting Accessories Hardware Fitting Accessories Contents Bolts Flush bolt/door operating locking bolt Fully automatic flush bolt Engineering security bolt Floor socket/indicator bolt set Door
More informationBOLOTA 316 OTHER PRODUCT RANGES SERVICE
BOLOTA 316 BOLOTA 316 OTHER PRODUCT RANGES SERVICE INDEX Lever Handles Escutcheons & Bathroom Turns Academy Range Pull Handles Push Plates & Kick Plates Signage Lockcases Cylinders Door Controls Hinges
More informationInterior Equipment, Shop Fittings
Interior Equipment, Häfele, the brand you can trust. The innovator of functionality. Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Eilox SHOPTEC Shopfitting
More informationACCESSORIES SUPPLEMENTS BERLIN
188 BERLIN In the model series you will find a variety of sign types and formats. On the following pages we will show you additional products such as picture rails and sign accessories such as spacers.
More informationargenta opening doors
invisidoor Invisible aluminium frame for interior doors Content invisidoor... 4 invisidoor AX / AX PRO... 10 invisidoor SD / SDX... 16 invisiplint... 22 general information... 27 THE INVISIDOOR CONCEPT
More informationWeatherfold 4s 50 & Guide to Quantities For Top Hung Exterior Folding Systems. Non Mortice Timber & Aluminium
- Guide to Quantities For Top Hung Exterior Folding Systems. Non Mortice Timber & Aluminium This Guide to Quantities is only applicable to Data Sheets E1 and E130. Specification for Individual Panels Track
More informationFURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS
www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories
More informationTubular Latches. 3 a. Heavy Duty Lever Latches Series HLL Features Ordering String Functions Dummy Mounts Trim Sets Specifications
3 Tubular Latches 3 a 3 4 6 8 12 14 Heavy Duty Lever Latches Series HLL Features Ordering String Functions Dummy Mounts Specifications 2016 02 2 FSB North America Heavy Duty Lever Latch HLL Series Quality
More informationSikurExit: panic function multipoint locks for 1- and 2-leaf aluminum and steel doors
SikurExit: panic function multipoint locks for 1- and 2-leaf aluminum and steel doors SikurExit: panic function multipoint locks for 1- and 2-leaf aluminum and steel doors OPERATION 3 point locking mechanism
More informationStandard program overview Steel smoke-proof doors
Smoke-proof doors Standard program overview Steel smoke-proof doors Pos. Product 1 RS-1 Steel door (thin rebated) Smoke-proof door in accordance EN 1634-3 / DIN 18095 Dimensions W 625-1350 H 1750-2500
More informationMADE IN GERMANY. Developed & Manufactured By. Drawer Runner System.
MADE IN GERMANY Developed & Manufactured By Drawer Runner System www.hafele.com MADE IN GERMANY Overview BASI SYSTEM Drawer sides with multi-functional benefi ts The Moovit drawer system provides completely
More informationAluminium hinges DORMA LM. October 1999
Aluminium hinges DORMA LM October 1999 DORMA LM Engineered down to the smallest detail adaptable to any profile system The DORMA LM series of aluminium hinges has been developed to give fast, safe and
More informationDoor Bolt - Satin Chrome. High quality solid brass, chrome plated surface fix bolt.
Bolts Door Bolt - Polished Brass Door Bolt - Polished Chrome Door Bolt - Satin Chrome Door Bolt - Florentine Bronze High quality solid brass surface fix bolt. High quality solid brass, chrome plated surface
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
PROFILE SYSTEM PRE-ASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS s r ood gni d i l s dna gni t f i l r o f s t neme l e de l bme s s a - er P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS MINITEC
More informationBEYOND. Accessories 132. General information 102. Safety-related information 157. Short pivoting rod 104. Continuous pivoting rod 106
BEYOND General information 102 Short pivoting rod 104 Accessories 12 Safety-related information 157 Continuous pivoting rod 106 Glass preparation 108 100 DORMA DORMA 101 BEYOND GENERAL INFORMATION SYSTEMATIC
More informationFig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7
FSW Installation instructions Track rail 75 x 72 mm 1. Ceiling substructure and installation of the track rail (Fig. 1): The track rail must be bolted over its entire length (including the stacking track
More informationK15.12 ROLLENBAND K15 DOORS
K15 DOORS 01.04.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics....03 2. Application range....03
More informationTectus TE 680 3D FD TECTUS TE 680 3D FD. The concealed hinge system for timber entrance doors
Tectus TE 680 3D FD TECTUS TE 680 3D FD The concealed hinge system for timber entrance doors 2 Tectus TE 680 3D FD Index TECTUS TE 680 3D FD The concealed hinge system for timber entrance doors 4 Sealing
More informationBÖMA GmbH Maschinenbau und Automatisierungstechnik
Construction kit index Profiles Aluminium grid 40 1.01 Aluminium grid 50 1.02 KP-40/50 Plastic profile 1.03 AP-40/50 Aluminium cover profile 1.03 SBT-F Sliding doors guide prof. 1.04 FL-40/50 Wear strip
More informationbriousa.com where ideas unfold Brio Single Run Top hung straight sliding architectural systems for panels up to 350kg (770lbs)
where ideas unfold briousa.com Brio Single Run Top hung straight sliding architectural systems for panels up to 350kg (770lbs) Brio where ideas unfold Watch your adventurous architectural ideas unfold
More informationHÄFELE WORLDWIDE. Häfele Distribution Centre (Nagold, Black Forest, southern Germany)
HÄFELE WORLDWIDE Häfele Headquater is located in Nagold, Black Forest, Germany with 100 % private ownership. Häfele is a leading company as a furniture fittings and architectural hardware supplier. The
More informationArticle List Portavant 120 Complete Sets. Smooth cushioning, gentle closing
Smooth cushioning, gentle closing Overview of feasible installation situations Portavant 120 Pages 1 to 3 Pages 7 to 9 Wall mounting Ceiling mounting with sidelight Pages 4 to 6 Pages 10 to 12 Photographic
More informationPANIC BARS Marking IN ACCORDANCE WITH 1125:1997/A1:2001
PANIC BARS Marking IN ACCORDANCE WITH 25:997/A:200 Exclusive PININFARINA design Full adaptability in application Quick and easy installation Reliable and safe performance Tested up to 2.000.000 cycles
More informationWall flashing profiles FP 60 WA 1 WA 150 WA 1 - ÜK WA 1 - Ü 150 E
Wall flashing profiles FP 60 WA 1 WA 150 WA 1 - ÜK 150-275 WA 1 - Ü 150 E 1 F Ü R D I E ZU K U N FT G E DAC HT. The alwitra waterproofing system alwitra wall flashing profiles are part of the practically
More informationEuropean cylinder 3 point lock. for aluminium and steel doors
European cylinder 3 point lock for aluminium and steel doors European cylinder 3 point locks for aluminium and steel doors HIGH SECURITY - Horizontally sliding lateral deadbolt. - Pre-setting for additional
More informationSPECIAL EXTRUSIONS AND ACCESSORIES
PROFILE SYSTEM SPECIAL EXTRUSIONS s no i s u r t xe l a i c eps Import Belgium & Luxembourg Profilex s.a. 4A, Z.I. In den Allern L-9911 Troisvierges Tel: 00352/99 89 06 Fax: 00352/26 95 73 73 www.profilex-systems.com
More informationHardware Fitting Accessories Accessories
Door viewer Suitable for door thicknesses (a) 34 52 mm Telescopic version Without flap Angle of vision: 160º Door drilling: 12 mm Suitable for door thicknesses (a) 35 78 mm Telescopic version Without flap
More informationHOPPE (UK) Ltd. Introducing ARRONE Plus Anti-Ligature Range. About HOPPE (UK) Ltd ARRONE
Anti-Ligature Range HOPPE (UK) Ltd Introducing ARRONE Plus Anti-Ligature Range It is a generally accepted statistic, supported by government figures, that several thousand people are seriously or fatally
More informationTechnical product descriptions WORKTOPS STANDARD SLIM LINE. 1. Material thickness 38 mm. 2. Core/substrate material Chipboard
Technical product descriptions WORKTOPS I STANDARD 1. 38 mm 2. Chipboard 3. Surface material Laminate (CPL, HPL) 4. Laminate thickness 0,6-0,8 mm 5. Surface structure Wood pore or relief, matt, gloss 6.
More informationSport-Thieme. Handball Goal. Assembly instruction. 3x2 m, Free-standing with Fixed Net Brackets
Assembly instruction Sport-Thieme Handball Goal Cat.-no.: 115 0953 2392905 239 2918 113 6500 239 2400 239 2413 3x2 m, Free-standing with Fixed Net Brackets Thanks for choosing Sport-Thieme equipment! In
More informationassembly instructions
door opens outwards door opens inwards front cubicle door opens outwards or inwards with side panel seite 1 ensure that the supplied parts are complete by checking the packing list. make sure that tools
More informationMEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
More informationDoor Furniture, Rosettes, Door Holders
Door Furniture, Rosettes, Door Holders Series 2600 B.2 B.9 Security Door Furniture 2600 Accessories Rosettes Series SELINA.700 B.12 B.17 Security Door Furniture SELINA.700, SELINA.750 Inside Door Rosette
More informationThe wide range of concealed hinges
The wide range of concealed hinges OTLAV S.p.A produces and sells hinges for doors and windows and other accessories for frames. Founded in 1956 by entrepreneur Angelo Padovan, is the world leader in terms
More informationOne programme many advantages. Type C-BASIC the extremely sturdy WC cubicle made of HPL
BASIC WC cubicles BASIC contents One programme many advantages............................ page 3 Type C-BASIC the extremely sturdy WC cubicle made of HPL................ page 4 / 5 Type D-BASIC the inexpensive
More informationPLANE Line PL 901 BASIC
Single Wing T 90 (El2 90-SaC5) Fire Resistant Steel Door PLANE Line PL 901 Plane Optic Fire Protection T90 (El2 90-SaC5) in accordance with DIN EN 1634-1 * Smoke Control RS (S 200) in accordance with DIN
More informationsalto safe 4028 A12 Turn-tilt windows
A12 Turn-tilt windows salto safe 4028 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. 32 9 388 88 81 - F. 32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com salto safe 4028 Contents 1. General
More informationSECTION QUALITY YOU CAN MEASURE
PANIC EXIT DEVICES10 SECTION QUALITY YOU CAN MEASURE The EN1125 Classification printed on each CE branded CISA panic device identifies the appropriate characteristics of each panic device. Sect.10.1 Sect.10.2
More informationConnector Technology, Shelf Supports Connection Fittings
MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid
More informationSLIDING DOOR SYSTEM_ S42 PRODUCT LIST. System description Accessories
SLIDING DOOR SYSTEM_ S42 PRODUCT LIST System description Accessories 1 SLIDING DOOR SYSTEM_ S42 1.0_ System description_ page 03 2.0_ Profiles_ page 04 3.0_ System description S1600 fixed panels_ page
More informationPrice list Portavant 80 automatic. Glass fittings with logic. New! Automatically convincing! SAFETY FIRST
Glass fittings with logic Price list Portavant 80 automatic New! Automatically convincing! SAFETY FIRST Select the solution to meet your needs in only three steps, using our complete sets. Select installation
More informationSport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed
Assembly instructions Art.-Nr.: 201 0915 203 4502 Sport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed 0218214 2018 Sport-Thieme GmbH D-38367 Grasleben Germany sport-thieme.com info @sport-thieme.com
More informationWA7000. (rev )
M-Series Push-Out Casement WA7000 Copyright 2018 Reveal Windows & Doors All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without permission by Reveal
More informationATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing.
F U R N I T U R E F I T T I N G S M A N U F A C T U R E R Twin-walled seel drawer. Complete Range of concealed runners up to 50 Kilos resistance. indamatic self closing and soft closing. Double wall 405
More informationSLIDING DOOR SYSTEM_ S34 PRODUCT LIST. System description Accessories
SLIDING DOOR SYSTEM_ S34 PRODUCT LIST System description Accessories SLIDING DOOR SYSTEM_ S34 1.0_ System description_ page 03 2.0_ Profiles_ page 04 3.0_ Profile finishes_ page 08 4.0_ Panels_ page 09
More informationBest Practice Guide. Metal Finishes. Trades descriptions for door and window hardware.
Metal Finishes Trades descriptions for door and window hardware www.dhfonline.org.uk 01 dhf Best Practice dhf Best Practice : Metal Finishes - Trades descriptions for door and window hardware Foreword
More informationAdjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
More informationStandard push bar panic and emergency exit devices.
Briton Series - Panic and emergency exit hardware Briton Series - Panic exit hardware Standard push bar panic and emergency exit devices. In distinct contrast to the modular nature of the Briton 560-0
More informationC11.15 HANDLES AND LOCKCASES C11 SIDE HUNG WINDOWS
C11 SIDE HUNG WINDOWS C11.15 HANDLES AND LOCKCASES 01.03.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Handles
More informationPUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20
Flat Goods Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy Duty
More informationTailor-made services for the benefit of your image TECHNICAL CATALOGUE STANDARD PRODUCTS.
Tailor-made services for the benefit of your image TECHNICAL CATALOGUE STANDARD PRODUCTS www.huguenin-sandoz.ch info@huguenin-sandoz.ch WATCH STANDS ADAPTABLE TO YOUR REQUIREMENTS Standard watch stands
More informationAstragals and Meeting Stiles
Table of Contents Split Astragals.....................................................1-2 Split Astragals with Snap Covers.......................................3 Meeting Stile Gasketing...............................................4
More informationTesting and CE Marking
Briton Series - Panic and emergency exit hardware Briton Series - Panic exit hardware Testing and CE Marking In distinct contrast to the modular nature of the Briton 560-0 Series, the long established
More informationHahn KT-R. Butt hinge for plastic doors
Hahn KT-R Butt hinge for plastic doors For explanations of the table, please visit www.dr-hahn.com Service classes Durability Weight of test door Fire resistance Security Corrosion resistance Intrusion
More informationBERNINI PANIC DEVICES
BERNINI PANIC DEVICES With EC mark, in compliance with standard EN 25:2008 Exclusive Pininfarina design Complete application adaptability Fast and easy installation Functional safety and reliability Also
More informationMaterial Packing Brown Grey Pine Black White
RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24
More informationE11.15 HANDLES AND LOCKCASES E11 BOTTOM HUNG OPEN IN WINDOWS
E11 BOTTOM HUNG OPEN IN WINDOWS HANDLES AND LOCKCASES 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Handles
More informationCOMPONENTS P A N E L + S H E L F F I X I N G S A C R Y L I C S A C C E S S O R I E S F I N m m C A B L E m m R O D.
COMPONENTS T H E D E F I N I T I V R A N G E C A B L E + R O D A C C E S S O R I E S P A N E L + S H E L F F I X I N G S 1. 5 m m C A B L E 3 m m C A B L E 6. 0 m m R O D 1 2. 0 m m R O D T R A C K F I
More informationIPA FITTINGS FOR SCHÜCO ALU INSIDE NORDIC A/S J. PETERSENS BESLAGFABRIK JACOB PETERSENSVEJ 9, DK-9240 NIBE TEL: (+45)
IPA FITTINGS FOR SCHÜCO ALU INSIDE NORDIC 2017 A/S J. PETERSENS BESLAGFABRIK JACOB PETERSENSVEJ 9, DK-9240 NIBE TEL: (+45) 98 35 15 00 3 FITTINGS FOR SCHÜCO ALU INSIDE NORDIC Table of contents PAGE SCHÜCO
More information