Tool Clamping Systems. CENTRO P Precision Collet Chucks. SYNCHRO T Tapping Chucks. precise. powerful. intelligent.

Transcription

1 Tool Systems CNTRO P Precision Collet Chucks SYNCRO T Tapping Chucks precise. powerful. intelligent.

2 Innovative Tool Systems from FRION When it comes to clamping cutting tools, collet technology cannot be beaten in terms of precision and force in relation to reliability and cost-effectiveness. FRION has been providing this technology with decisive impulses for decades. = The FRION Precision Collet The heart of the technology is the collet: For many years, the combination of a specially manufactured steel and our unique production technology has enabled FRION to manufacture top-quality collets according to IN ISO (R / SX) with a maximum accuracy of 2 μm. = The FRION CNTRO P Precision Collet Chuck The CNTRO P s legendary reputation on the market is no coincidence. It is one of the best collet chucks that money can buy. Combined with the FRION collets, which are perfectly matched to this chuck, it achieves a system accuracy of 3 µm and avoids the need to use expensive hydraulic expansion and shrinking techniques. In this catalogue we explain in detail the many different beneits of this technology with regard to accuracy, holding force, lexibility and priceperformance ratio. 2 FRION Tool clamping systems

3 = ven more Power with the Maxi RIP igh Performance Power System In order to be able to use the CNTRO P clamping technology for extreme roughing and highly resistant materials as well, this simple but technically ingenious clamping technology increases the holding torque of the CNTRO P to 800 Nm and more. = The FRION SYNCRO T Tapping Chuck By compensating the pitch differences or tolerances of the tap and the synchronous spindle, the machining results can be optimised while maintaining quality and cost-effectiveness. special tapping chuck with minimum length compensation is required for this. We ve got it the SYNCRO T! Rely on tool clamping systems from FRION and obtain perfect results with unbeatable cost-effectiveness. 3

4 The FRION Precision Modular System Chuck older Version Chuck Form For all common spindle holder types. The CNTRO P Precision Collet Chuck is available in two versions for different collets. In addition there is an optimised Tapping Chuck: the SYNCRO T. The chuck is classiied into three basic forms. ifferent chuck diameters and lengths give rise to 260 variants of the CNTRO P. unique variety of possible applications. Mixed forms such as Mini-Tapered and Tapered-Standard are possible. = IN SK 30 / 40 / 50 = IN / ISO SK- 32 / 40 / 50 / 63 / 80 / 100 = IN SK- 25 / 32 / 40 / 50 / 63 = IN SK-F 63 = ISO C 4 / 5 / 6 / 8 = JIS 6339 MS / BT 30 / 40 / 50 = NSI B5.50 CT 40 / 50 = IN 1835 Z 10 / 16 / 20 / 25 / 32 R OZ B CNTRO P - for collets according to IN ISO B (R/SX) - very high concentricity of 3 µm with FRION R-P collets CNTRO P - for collets according to IN ISO B (OZ) - extremely stable versions with holding forces of over 600 Nm with CP ideal for rough milling SYNCRO T - for tap collets similar to IN ISO with internal square drive - with minimum length compensation MINI TPR STNR - slim version for PCM Mini - small interference contour - external diameter of clamping nuts 10 / 16 / 22 mm - clamping ranges 1 5 mm (R8), 1 7 mm (R11), 1 10 mm (R16) - standard projection lengths (dimension ) of 50 / 70 / 100 /4 / 130 / 6 / 160 mm (type-dependent) - balancing quality 2.5 at up to 30,000 rpm pplication examples: SC machining, die and mould making, medical and dental technology, drilling / reaming / inishing - tapered version for PCC Special - small interference contour with external diameter of clamping nuts 16 / 22 / 24 mm - clamping ranges 1 7 mm (R11), 1 10 mm (R16) - standard projection lengths (dimension ) of 45 / 55 / 60 /100 / 4 / 130 / 6 / 160 mm (type-dependent) - balancing quality 2.5 at up to 30,000 rpm pplication examples: SC machining, model, mould and tool making, drilling / reaming / inishing and roughing - rigid version for PC Standard - external diameter of clamping nuts 30 / 32 / 40 / 50 / 63 mm - clamping ranges 1 10 mm (R16), 1 13 mm (R20), 1 16 mm (R25), 2 20 mm (R32), 3 26 mm (R40), 2 25 mm (FM25), 4 32 mm (FM32) - standard projection lengths (dimension ) of 40 / 48 / 50 /60 / 2.5 / 70 / 3 / 80 / 85 / 90 / 100 / 4 / 120 / 5 / 130 / 6 / 160 / 200 mm (type-dependent) - balancing quality 2.5 at up to 30,000 rpm pplication examples: SC and PC machining, model, mould and tool making, drilling / reaming / inishing / roughing, machining of wood 4 FRION Tool clamping systems

5 Collet nut Cooling Suitable for all possible methods of supplying cooling lubricant. The central component of the FRION modular kit, the collet, is available in several versions differing in accuracy, area of application and coolant application. Since the chuck body is supplied without clamping nuts, these must be ordered separately. You have the choice between the standard version and the version for sealing discs! - central () - laterally via the collar (C) - minimum-quantity lubrication (MQL) - air cooling - peripheral cooling along the shaft by means of larger sealing disc Pull Stud IN Form Cooling lubricant supply through the centre Form / BT Pull Stud IN Form B Cooling lubricant supply via the collar Form B / BTB R-P Precision Collet 2 μm IN ISO B (R/SX) R-P Precision Collet 2 μm similar to IN ISO with seals for IC (inner coolant supply) R-P Precision Collet 2 μm similar to IN ISO with seals for IC (inner coolant supply) and jet holes R-B Tap Collet similar to IN ISO with internal square drive and seals for IC (inner coolant supply) R-B Tap Collet similar to IN ISO with internal square drive, seals for IC (inner coolant supply) and jet holes OZ--P Precision Collet 3 μm IN ISO B Technical Information MQL 2, rpm 2,5 6, rpm 6, rpm The chucks marked with MQL are suitable for minimum quantity lubrication. In MQL the required amount of lubricant for the cutting tool is reduced to a minimum by means of a dosing technique. This is supplied to the cutting point either directly or i- nely dispersed via an air stream. fter clariication of all technical details we can convert MQL-compatible chucks. CNTRO P Standard balancing quality for SK IN Form and F CNTRO P Standard balancing quality for IN 69871, SK IN / ISO Form, polygonal, MS/BT (JIS B 6339) and CT (NSI B5.50) SYNCRO T Standard balancing quality for SK IN / ISO Form SYNCRO T Standard balancing quality for IN and MS/BT (JIS B 6339) Table for converting inches to mm see page 71 5

6 Overview of Contents Tool Systems Page Introduction 2 Precision Modular System, Technical Information 4 Overview of Contents 6 CNTRO P precise. 8 CNTRO P powerful. 10 CNTRO P intelligent. 12 Maxi RIP and SYNCRO T intelligent. 14 Precision and Tapping Chucks CNTRO P Precision Collet Chuck R OZ SYNCRO T Tapping Chuck B older Type Page Taper Shanks IN /B /B50 20 ollow Tapers IN / ISO SK SK SK SK SK SK ollow Tapers IN SK SK SK SK SK SK-F63 38 Polygonal Shanks ISO C4 39 C5 39 C6 40 C8 41 Taper Shanks JIS B 6339 MS/BT30 () 41 MS/BT 0 ( /B) 2 MS/BT 0 ( /B) Taper Shanks NSI B.50 CT40 (/B) 47 CT50 (/B) 49 Cylindrical Shanks Z () 50 Taper Shanks similar to IN (wood working) 30 () 51 6 FRION Tool clamping systems

7 R OZ B Page Precision and Tap R-P Precision IN ISO B (R/SX) 59 R-P Precision similar to IN ISO with Seals for IC (Inner Coolant Supply) 60 R-P Precision similar to IN ISO with Seals for IC (Inner Coolant Supply) and Jet oles 60 R-B Tap similar to IN ISO with Seals for IC (Inner Coolant Supply) 61 R-B Tap similar to IN ISO with Seals for IC (Inner Coolant Supply) and Jet oles 62 OZ Precision IN ISO B 62 ccessories PC 52 RO RO Roller Bearing Wrenches 57 RMO Torque Setting Wrenches 58 TBRS Mounting evices 58 I I Sealing iscs 63 BIS ata Carriers 63 S-U S-W djustable Stop Screws 64 KW Taper Wipers 65 F Flex-one Brushes 65 IKR SCL-IKR Coolant Supply Tubes and Wrenches 66 ZB Pull Studs 67 MXI RIP igh Performance Power System 70 Conversion Table 71 Ordering xample 71 7

8 Precise and conomical lthough it costs more than a standard collet chuck, a precision collet chuck wins by a mile in terms of cost-effectiveness. With maximum precision you achieve better machining results with considerably smaller manufacturing tolerances, thus saving expensive reworking. In addition, precision means that longer service lives of the cutting tools are achieved and that the machine spindle is preserved even during the most complex work. These are just two of the factors that can cause far higher costs than the comparatively low additional expenditure involved in the acquisition of a precision collet chuck. Thanks to the system accuracy of 3 μm the CNTRO P is not only at the peak of precision, but also stands for a high degree of cost-effectiveness! precise. 8 FRION Tool clamping systems

9 CNTRO P Top Class with 3 μm System ccuracy ccuracy Finishing CNTRO P Pre-roughing 3 x Standard R collet chuck SC roughing PC roughing Force = ccuracy and olding Force The FRION CNTRO P belongs to the absolute top class of collet chucks. Unique, patented design features achieve a far higher accuracy than conventional R collet chucks. Furthermore the system provides impressively higher holding forces. Thanks to this interaction the CN- TRO P can be used in a signiicantly wider range of applications. = Optimum esign ue to well-thought-out chuck design, we achieve maximum symmetry with minimum residual imbalance. Further design features are the ground 30 trapezoidal thread and the special coating of the nut, which reduce friction and, together with the double guiding, ensure accurate centring of the nut on the chuck. = igh Concentricity and Repeatability Together with the FRION R-P Precision an outstanding system accuracy of 3 μm is reached (at 3 x, 50 mm). We thus achieve up to six times the precision of a conventional R collet chuck. = Maximum Balancing Quality The chuck is a central element for the dampening of vibrations in the system of machine spindle, tool holder and tool. For this reason great importance is attached to the balancing quality of CNTRO P Precision Collet Chucks. They are inely balanced as standard with 2.5 at up to 30,000 rpm or U 1 gmm, thus achieving maximum dimensional accuracy, surface quality and tool service lives. 9

10 reater Force for Flexibility With a powerful grip you can keep a irm hold on everything. That is precisely the demand made on a highly eficient tool clamping system, because only in this way can a precise and, hence, economical result be achieved, irrespective of the material, the type of machining and the clamping situation. The extraordinary holding force of the FRION tool clamping systems leads to the greatest possible material removal rate without the danger of tool withdrawal and the associated risk of scrap and is thus a guarantor for safe, effective and economical operation. Fundamentally thought-through and thanks to consistent further development even in the details, FRION s patented collet system grips more powerfully than ever. distinctive feature that offers decisive advantages in all disciplines of tool clamping compared to conventional collet chucks. powerful. 10 FRION Tool clamping systems

11 The CNTRO P More Powerful in Principle 0,0 mm 2,0 mm CNTRO P IN collet sits completely in the holder: FRION patent pproximate competitor s solution olding torque in Nm* CNTRO P CP 32 Standard R collet chuck 4,0 mm Standard R collet chuck Ø in mm *olding torque (statistic) in Nm at the tool, tightening torque of the clamping nut 140 Nm, tool shank hardended, polished (Rz 2.5) and grease-free CNTRO P CNTRO P = igh olding Force In FRION s patented collet system the collet sits completely inside the collet closing taper. ue to the unique design it does not apply the usual bridging, thus enabling holding forces twice as high as those of conventional collet chucks. The ground trapezoidal thread, the polished surface of the collet and the roughness in the bore of the collet further increase the holding forces. This ensures high security and enables rough machining with optimum results. = igh Rigidity The reduction of bending and compressive forces creates an enormous stability. This has been implemented in the design of the CNTRO P according to the latest indings. The chuck body is reinforced to the diameter of the clamping nut, leading to maximum rigidity and an optimum interference contour. CNTRO P Perfect clamping (recommended for PC) Reduced clamping force = Strong and Insensitive ven insensitivity is a strong point. The CNTRO P is resistant to temperature luctuations and is fully suitable for dry processes and hard milling up to 200 C. ydraulic chuck = Immense Stability The special design of the CNTRO P achieves a better and more even distribution of the clamping forces over the entire cylindrical surface of the tool shank and the radial forces are optimally absorbed. So milling operations produce perfect surfaces. 11

12 System Intelligence in the etails, too FRION s most important principle has always been to keep things simple. For us, a technical development only reaches full maturity when it is immediately understandable and usually when it is amazingly simple. nd that is precisely what we have succeeded in doing with our precision collet chucks. precise collet chuck with a unique design and with a large range of possible applications. Constructional intelligence is the basis for the entire system and the top series CNTRO P represents the peak of simple perfection. Intelligent Innovations = Consistently innovative Precision collet chucks by FRION have been perfected over a period of many years, making use of a great deal of experience and beneit from large investments in development. It is often the smallest details that move us forward and which ultimately provide the technical advantage. For many years, we have worked with our customers to turn practical requirements into useful products. = reatest Possible ampening The constructive principle of our collets absorbs vibrations. Perfectly calculated masses optimise cushioning even more. = nvironmental Protection Sustainability is not just a question of money, but also of conscientious dealing with energy and resources. Thanks to its perfect concentricity, CNTRO P reduces the power consumption of the spindle. Workpieces can be machined in a shorter time, as a result of which, less electricity is used. ry machining is possible, saving the costs for water, cooling units, and disposal. In addition, tool wear is reduced, and the tools don t need to be replaced so often. = Simple andling FRION relies on simplicity where handling is concerned, too. espite its many technical advantages, an ingeniously simple, mechanical collet chuck requires no peripheral devices. It can be clamped simply, quickly, and securely, using the roller bearing wrench. The high purchase costs for ancillary equipment can be dispensed with. = Variable Cooling CNTRO P is suitable for all methods of cooling lubricant supply (central, laterally via the collar, minimum quantity lubrication, air cooling or peripheral cooling along the tool shank). Tool clearance CNTRO P Tool clearance conventional collet chuck = Largest Possible Tool Clearance The CNTRO P is designed in such a way that it offers the largest possible tool clearance and thus an extra-long length adjustment range. ence, the tool can be clamped at the optimum tool projection length, whereby vibration is prevented, the tool is preserved, and the surface inish is optimised. 12 FRION Tool clamping systems

13 intelligent. = Universally Usable The CNTRO P is ideal for drilling, countersinking, reaming, milling, for PC / SC, and for tapping. rilling / Countersinking Precision reaming Milling ard milling Traverse milling = Intelligent System The clamping nut of the CNTRO P is tightened with a roller bearing wrench. The clamping nuts are marked with the maximum torques, which depend on the diameter to be clam- SC milling in tool and mould making industry Over-length chucks for poorly accessible machining areas ped. In principle the maximum tightening torques can be used; for inishing machining, however, we recommend tightening the clamping nut only to 50-70% of the maximum tightening torque in order to obtain the optimal machining results on account of a higher degree of damping. The clamping nut itself is manufactured completely symmetrically and has no slots or holes. = On Request with Collapse By means of a special clamping nut, a collapse up to 0.4 mm can be achieved with the R-P collet. 13

14 Maxi RIP The igh Performance Power System with a olding Torque of 800 Nm The machining of highly resistant materials such as stainless steel or titanium is increasingly in demand, placing high demands on the holding torques of your tool clamping systems. The newly developed Maxi RIP igh Performance Power System doubles the already high holding torques of the CNTRO P Precision Collet Chuck and thus enables extreme rough machining. With the specially developed and patented induction technology the range of application of the CNTRO P Precision Collet Chuck is expanded, tool service lives are extended and top surface qualities are achieved. The total system costs are thus reduced. = Maxi RIP - The Intelligent Solution In combination with the CNTRO P, this thermal clamping system enables holding forces of up to 800 Nm and higher to be achieved. For years CNTRO P has set standards in concentricity, dampening, stability and, in 80% of applications, in clamping force, too; the increased demands on the holding torque are now met and even exceeded with Maxi RIP. = Process Reliability with igh Functionality tool is clamped as usual in the CNTRO P using the roller bearing wrench (e.g. with 140 Nm for a 20 mm tool). The nut is subsequently heated up to 150 C within a few seconds by an inductive heat source (380 V). The process thus remains in the low temperature range. The temperature difference provides for a slight expansion of the clamping nut in relation to the collet chuck. fter heating up, the clamping nut is retightened to 140 Nm using the torque wrench. This additional rotation of the clamping nut more than doubles the holding torque. = Precision, Concentricity and ampening Remain Outstanding This enormous increase is not achieved at the expense of precision. With a concentricity of 3 μm (based on a tool with a projection length of 3 x ), the usual FRION quality is retained in full. The advantage of the low temperature range for example in relation to shrinking with up to 300 C and water cooling also lies in the short cooling phase and the cheaper equipment. FRION s cooling solution consists of a simple cooling bath, in which the tool is cooled down to lukewarm within just one minute. It has been veriied that the small temperature differences have no negative effect on the microstructure of the material. The dampening characteristics also remain outstanding, although they are slightly reduced by the thermal clamping. The good cushioning characteristics are mainly attributable to the multipart clamping system, in which the collet absorbs vibrations on account of its dampening capacity. = Main dvantages - Maximisation of the holding torque to over 800 Nm - Constant high precision - Outstanding dampening - Longer tool life - Machining of highly resistant materials 14 FRION Tool clamping systems

15 SYNCRO T The Perfectly Optimised Tapping Chuck The SYNCRO T Tapping Chuck compensates differences in pitch between the tap and the synchronous spindle as well as compensating the pitch tolerances of the tap. It provides for a cushioning effect between the tool and spindle during synchronised tapping (rigid tapping) on machining centres with synchronous spindles. = Versatile Properties - minimum length compensation on compression / tension (± 0.5 mm) - high radial rigidity due to double bearing - high concentricity - high clamping force due to clamping by tap collets with internal square drive - separate compression / tension mechanism - deined adjustable compressive / tensile forces - compact, wear-free design - long service life - internal coolant feed possible in all types - no clamping nuts for sealing discs are required when using coolant, since the FRION R-B Tap are generally supplied with seals (usable up to 120 bar) - minimum quantity lubrication (MQL) possible on request = dvantages in Synchronous Tapping - absolute process reliability due to minimum length compensation - low risk of breakage - high service lives of the taps (up to 150% higher than with a rigid collet chuck) - improved thread quality - fewer machine downtimes = Conclusion In order to achieve the optimum cutting result, the FRION SYNCRO T Tapping Chuck should be used on machines with synchronous spindles even where the latest controllers are involved so as to extend service life and improve quality. intelligent. 15

16 Collet Chucks with Taper Shanks IN R MINI 2,5 CNTRO P Slim Version for PCM Mini escription Order-No. Form 1) tool insertion Tool insertion Range / CP11M-30-= CP11M-30-= ,0 7,0 R11-P PC M PC11M-I ccessories: pages 52, 53, Wrenches page 57, Mounting evices page 58, Precision page 59, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Pull Studs page 67 R STNR 2,5 CNTRO P Version for PC escription Order-No. Form 1) CP16-30-= CP16-30-= CP25-30-= tool insertion Tool insertion CP32-30-= Range / 1,0 10,0 R16-P/P/B 1,0 16,0 R25-P/P/B 2,0 20,0 R32-P/P/B PC PC16-I PC PC25-I PC PC32-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Pull Studs page 67 1) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on pages 52 and FRION Tool clamping systems

17 α Collet Chucks with Taper Shanks IN /B40 R MINI 2,5 CNTRO P Slim Version for PCM Mini escription Order-No. Form 1) CP11M-B40-= CP11M-B40-= CP11M-B40-= CP11M-B40-= /B CP16M-B40-= CP16M-B40-= CP16M-B40-= CP16M-B40-= tool insertion Tool insertion Range / 1,0 7,0 R11-P 1,0 10,0 R16-P/P/B PC M PC11M-I PC MS PC16MS- I ccessories: pages 52, 53, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Pull Studs pages 67, 68 R TPR 2,5 CNTRO P Tapered Version for PCC Special escription Order-No. Form 1) α tool insertion Tool insertion Range / CPC16-B40-= ,5 140 /B 24 CPC16-B40-= , ,0 10,0 R16-P/ P/B PC C PC16C-I ccessories: page 53, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Pull Studs pages 67, 68 1) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on pages 52 and 53 17

18 Collet Chucks with Taper Shanks IN /B40 R STNR 2,5 CNTRO P Version for PC escription Order-No. Form 1) CP16-40-= CP16-B40-= /B CP16-40-= CP16-B40-= CP16-B40-= /B CP16-B40-= CP16-B40-= CP20-B40-= CP20-B40-= CP25-B40-= CP25-40-= CP25-B40-= /B CP25-40-= CP25-B40-= CP25-B40-= /B CP25-B40-= CP25-B40-= CP32-40-= CP32-B40-= /B CP32-40-= CP32-B40-= /B CP32-40-= CP32-B40-= CP32-B40-= /B CP32-B40-= CP40-40-=70 2) CP40-40-=100 2) tool insertion 94 Tool insertion Range / 1,0 10,0 R16-P/P/B 1,0 13,0 R20-P/P/B 1,0 16,0 R25-P/P/B 2,0 20,0 R32-P/P/B 3,0 26,0 R40-P/P/B PC PC16-I PC PC20-I PC PC25-I PC PC32-I PC PC40-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Pull Studs pages 67, 68 1) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1 under on page 54 2) Without clearance to IN in front of the tool change lange 18 FRION Tool clamping systems

19 Collet Chucks with Taper Shanks IN /B40 F OZ STNR 2,5 CNTRO P Version for PC escription Order-No. Form 1) tool insertion Tool insertion 2) F 2) CP225-B40-= /B Range / 2,0 25,0 FM P PC PC225-I ccessories: page 55, Wrenches page 57, Mounting evices page 58, Precision page 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Pull Studs pages 67, 68 T B 6, rpm SYNCRO T Tap insertion T escription Order-No. Form 2,8 7, Cutting range ST16-B-B40-= M3 M12 R16-B ST20-B-B40-= M3 M16 R20-B ST25-B-B40-= /B M3 M20 R25-B 25 ST32-B-B40-= M4 M27 R32-B ST40-B-B40-= M4 M33 R40-B ccessories: Wrenches page 57, Mounting evices page 58, Tap pages 61, 62, Taper Wipers page 65, Flex-one Brushes page 65, Pull Studs pages 67, 68 1) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on page 55 2) imension is for tool shanks 20 mm and dimension F is for tool shanks > 20 mm 19

20 Collet Chucks with Taper Shanks IN /B50 R STNR 2, rpm CNTRO P Version for PC escription Order-No. Form 1) CP16-50-= CP16-50-= CP16-50-= CP25-50-= CP25-50-= CP25-50-= CP32-B50-= tool insertion CP32-B50-= /B CP32-B50-= CP40-50-= CP40-50-= Tool insertion Range / 1,0 10,0 R16-P/P/B 1,0 16,0 R25-P/P/B 2,0 20,0 R32-P/P/B 3,0 26,0 R40-P/P/B PC PC16-I PC PC25-I PC PC32-I PC PC40-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61,62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Pull Studs pages 67, 68 OZ STNR 2,5 CNTRO P Version for PC escription Order-No. Form 1) CP225-B50-= /B tool insertion Tool insertion CP432-B50-= Range / 2,0 25,0 FM P 4,0 32,0 FM32 PC PC225-I PC PC432-I ccessories: page 55, Wrenches page 57, Mounting evices page 58, Precision page 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Pull Studs pages 67, 68 1) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on pages 54 and FRION Tool clamping systems

21 Collet Chucks with Taper Shanks IN /B50 T B 6, rpm SYNCRO T Tap insertion T escription Order-No. Form 2,8 7, Cutting range ST16-B-B50-= M3 M12 R16-B ST20-B-B50-= M3 M16 R20-B ST25-B-B50-= /B M3 M20 R25-B 25 ST32-B-B50-= M4 M27 R32-B ST40-B-B50-= M4 M33 R40-B ccessories: Wrenches page 57, Mounting evices page 58, Tap pages 61, 62, Taper Wipers page 65, Flex-one Brushes page 65, Pull Studs pages 67, 68 Collet Chucks with ollow Tapers IN 69893/ISO SK-32 R MINI MQL 1) 2,5 CNTRO P Slim Version for PCM Mini escription Order-No. Form 2) tool insertion Tool insertion Range / 1,0 7,0 CP11M-SK-32-=40 3) R11-P CP16M-SK-32-=50 3) ,0 10,0 24 CP16M-SK-32-= R16-P/P/B PC M PC11M-I PC MS PC16MS-I ccessories: pages 52, 53, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 1) MQL (minimal quantity lubrication) see page 5 2) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on pages 52 and 53 3) xtra short version, screw 21

22 Collet Chucks with ollow Tapers IN 69893/ISO SK-32 R STNR MQL 1) 2,5 CNTRO P Version for PC escription Order-No. Form 2) tool insertion Tool insertion CP20-SK-32-=50 3) Range / 1,0 13,0 R20-P/P/B PC PC20-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 Collet Chucks with ollow Tapers IN 69893/ISO SK-40 R MINI MQL 1) 2,5 CNTRO P Slim Version for PCM Mini escription Order-No. Form 2) tool insertion Tool insertion Range / CP11M-SK-40-= ,0 7, CP11M-SK-40-= R11-P PC M PC11M-I ccessories: page 52, Wrenches page 57, Mounting evices page 58, Precision page 59, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 1) MQL (minimal quantity lubrication) see page 5 2) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on pages 52 and 54 3) xtra short version, screw 22 FRION Tool clamping systems

23 α α Collet Chucks with ollow Tapers IN 69893/ISO SK-40 R MINI TPR MQL 1) 2,5 CNTRO P Tapered Version for PCM Mini escription Order-No. Form 2) α CPC11M-SK-40- =100 tool insertion Tool insertion , Range / 1,0 7,0 R11-P PC M PC11M-I ccessories: page 52, Wrenches page 57, Mounting evices page 58, Precision page 59, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 R TPR MQL 1) 2,5 CNTRO P Tapered Version for PCC Special escription Order-No. Form 2) α tool insertion Tool insertion Range / CPC16-SK-40-= ,0 10, R16-P/ CPC16-SK-40-= P/B PC C PC16C-I ccessories: page 53, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 1) MQL (minimal quantity lubrication) see page 5 2) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on pages 52 and 53 23

24 Collet Chucks with ollow Tapers IN 69893/ISO SK-40 R STNR MQL 1) 2,5 CNTRO P Version for PC escription Order-No. Form 2) CP16-SK-40-= tool insertion CP25-SK-40-=60 3) ,0 16,0 40 CP25-SK-40-= R25-P/P/B 40 Tool insertion CP32-SK-40-=61 3) Range / 1,0 10,0 R16-P/P/B 2,0 20,0 R32-P/P/B PC PC16-I PC PC25-I PC PC32-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 T B MQL 1) 6, rpm SYNCRO T Tap insertion T escription Order-No. Form 2,8 7, Cutting range ST16-B-SK-40-= M3 M12 R16-B ST20-B-SK-40-= M3 M16 R20-B ccessories: Wrenches page 57, Mounting evices page 58, Tap pages 61, 62, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 1) MQL (minimal quantity lubrication) see page 5 2) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on page 54 3) xtra short version, screw 24 FRION Tool clamping systems

25 Collet Chucks with ollow Tapers IN 69893/ISO SK-50 R MINI MQL 1) 2,5 CNTRO P Slim Version for PCM Mini escription Order-No. Form 2) tool insertion CP11M-SK-50-= Tool insertion Range / 1,0 7,0 R11-P PC M PC11M-I ccessories: page 52, Wrenches page 57, Mounting evices page 58, Precision page 59, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 R MINI TPR MQL 1) 2,5 CNTRO P Tapered Version for PCM Mini escription Order-No. Form 2) α CPC11M-SK-50- =100 tool insertion Tool insertion , Range / 1,0 7,0 R11-P PC M PC11M-I ccessories: page 52, Wrenches page 57, Mounting evices page 58, Precision page 59, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 1) MQL (minimal quantity lubrication) see page 5 2) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on page 52 25

26 Collet Chucks with ollow Tapers IN 69893/ISO SK-50 α R TPR MQL 1) 2,5 CNTRO P Tapered Version for PCC Special escription Order-No. Form 2) α tool insertion CPC16-SK-50-= CPC16-SK-50-= , CPC16-SK-50-= Tool insertion Range / 1,0 10,0 R16-P/ P/B PC C PC16C-I ccessories: page 53, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 R STNR MQL 1) 2,5 CNTRO P Version for PC escription Order-No. Form 2) CP25-SK-50-= tool insertion Tool insertion CP25-SK-50-= CP25-SK-50-= CP32-SK-50-= Range / 1,0 16,0 R25-P/P/B 2,0 20,0 R32-P/P/B PC PC25-I PC PC32-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 1) MQL (minimal quantity lubrication) see page 5 2) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on pages 53 and 54 3) xtra short version, screw 26 FRION Tool clamping systems

27 Collet Chucks with ollow Tapers IN 69893/ISO SK-50 T B MQL 1) 6, rpm SYNCRO T Tap insertion T escription Order-No. Form 2,8 7, Cutting range ST16-B-SK-50-= ST20-B-SK-50-= M3 M16 R20-B ST25-B-SK-50-= M3 M20 R25-B - M3 M12 R16-B ST32-B-SK-50-= M4 M27 R32-B ccessories: Wrenches page 57, Mounting evices page 58, Tap pages 61, 62, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 27

28 α Collet Chucks with ollow Tapers IN 69893/ISO SK-63 R MINI MQL 1) 2,5 CNTRO P Slim Version for PCM Mini escription Order-No. Form 2) CP11M-SK-63-= tool insertion Tool insertion CP11M-SK-63-= CP11M-SK-63-= CP11M-SK-63-= CP16M-SK-63-= CP16M-SK-63-= CP16M-SK-63-= CP16M-SK-63-= Range / 1,0 7,0 R11-P 1,0 10,0 R16-P/P/B PC M PC11M-I PC MS PC16MS-I ccessories: pages 52, 53, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 R TPR MQL 1) 2,5 CNTRO P Tapered Version for PCC Special escription Order-No. Form 2) α tool insertion Tool insertion Range / CPC16-SK-63-= , CPC16-SK-63-= , ,0 10,0 R16-P/ P/B PC C PC16C-I ccessories: page 53, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 1) MQL (minimal quantity lubrication) see page 5 2) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on pages 52 and FRION Tool clamping systems

29 Collet Chucks with ollow Tapers IN 69893/ISO SK-63 R STNR MQL 1) 2,5 CNTRO P Version for PC escription Order-No. Form 2) CP16-SK-63-=55 3) CP16-SK-63-= CP16-SK-63-= CP16-SK-63-= CP16-SK-63-= CP20-SK-63-=60 3) CP20-SK-63-= CP25-SK-63-=60 3) CP25-SK-63-= CP25-SK-63-= CP25-SK-63-= CP25-SK-63-= CP32-SK-63-=70 3) tool insertion CP32-SK-63-= CP32-SK-63-= CP32-SK-63-= CP40-SK-63-=80 3)4) CP40-SK-63-=160 4) Tool insertion - - Range / 1,0 10,0 R16-P/P/B 1,0 10,0 R20-P/P/B 1,0 16,0 R25-P/P/B 2,0 20,0 R32-P/P/B 3,0 26,0 R40-P/P/B PC PC16-I PC PC20-I PC PC25-I PC PC32-I PC PC40-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 1) MQL (minimal quantity lubrication) see page 5 2) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on page 54 3) xtra short version, screw 4) Without clearance to IN in front of the tool change lange 29

30 α α Collet Chucks with ollow Tapers IN 69893/ISO SK-63 R TPR STNR MQL 1) 2,5 CNTRO P Tapered Version for PC escription Order-No. Form 2) α tool insertion Tool insertion CPC32-SK-63-=75 3) Range / 2,0 20,0 R32-P/ P/B PC PC32-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 OZ TPR STNR MQL 1) 2,5 CNTRO P Tapered Version for PC escription Order-No. Form 2) α tool insertion Tool insertion CPC225-SK-63- =85 3) , Range / 2,0 25,0 FM P PC PC225-I ccessories: page 55, Wrenches page 57, Mounting evices page 58, Precision page 62, Sealing iscs page 63, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 1) MQL (minimal quantity lubrication) see page 5 2) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on pages 54 and 55 3) xtra short version, screw 30 FRION Tool clamping systems

31 Collet Chucks with ollow Tapers IN 69893/ISO SK-63 OZ STNR MQL 1) 2,5 CNTRO P Version for PC escription Order-No. Form 2) tool insertion CP432-SK-63-=90 3) Tool insertion Range / 4,0 32,0 FM32 PC PC432-I ccessories: page 55, Wrenches page 57, Mounting evices page 58, Precision page 62, Sealing iscs page 63, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 T B MQL 1) 6, rpm SYNCRO T Tap insertion T escription Order-No. Form 2,8 7, Cutting range ST16-B-SK-63-= ST20-B-SK-63-= ST25-B-SK-63-= M3 M20 R25-B 25 ST32-B-SK-63-= M4 M27 R32-B - - M3 M12 M3 M16 R16-B R20-B ST40-B-SK-63-= M4 M33 R40-B ccessories: Wrenches page 57, Mounting evices page 58, Tap pages 61, 62, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 1) MQL (minimal quantity lubrication) see page 5 2) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on page 55 3) xtra short version, screw 31

32 Collet Chucks with ollow Tapers IN 69893/ISO SK-80 R STNR MQL 1) 2,5 CNTRO P Version for PC escription Order-No. Form 2) CP32-SK-80-= tool insertion Tool insertion CP40-SK-80-= Range / 2,0 20,0 R32-P/P/B 3,0 26,0 R40-P/P/B PC PC32-I PC PC40-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 T B MQL 1) 6, rpm SYNCRO T Tap insertion T escription Order-No. Form 2,8 7, Cutting range ST32-B-SK-80-= M4 M27 R32-B ST40-B-SK-80-= M4 M33 R40-B ccessories: Wrenches page 57, Mounting evices page 58, Tap pages 61, 62, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 1) MQL (minimal quantity lubrication) see page 5 2) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on page FRION Tool clamping systems

33 α Collet Chucks with ollow Tapers IN 69893/ISO SK-100 R STNR MQL 1) 2,5 CNTRO P R Version for PC escription Order-No. Form 2) CP16-SK-100-= CP16-SK-100-= tool insertion CP25-SK-100-= CP25-SK-100-= ,0 10,0 R16-P/P/B 1,0 16,0 R25-P/P/B CP32-SK-100-= ,0 20,0 CP32-SK-100-= R32-P/P/B CP32-SK-100-= CP40-SK-100-=100 3) Tool insertion Range / 3,0 26,0 R40-P/P/B PC PC16-I PC PC25-I PC PC32-I PC PC40-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 OZ TPR STNR MQL 1) 2,5 CNTRO P Tapered Version for PC escription Order-No. Form 2) tool insertion Tool insertion Range / CPC225-SK =90 3) CPC432-SK =100 3) ,0 25,0 FM P 4,0 32,0 FM32 PC PC225-I PC PC432-I ccessories: page 55, Wrenches page 57, Mounting evices page 58, Precision page 62, Sealing iscs page 63, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 1) MQL (minimal quantity lubrication) see page 5 2) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on pages 54 and 55 33

34 α Collet Chucks with ollow Tapers IN 69893/ISO SK-100 T B MQL 1) 6, rpm SYNCRO T Tap insertion T escription Order-No. Form 2,8 7, Cutting range ST16-B-SK-100-= ST20-B-SK-100-= ST25-B-SK-100-= M3 M20 R25-B 25 ST32-B-SK-100-= M4 M27 R32-B - - M3 M12 M3 M16 R16-B R20-B ST40-B-SK-100-= M4 M33 R40-B ccessories: Wrenches page 57, Mounting evices page 58, Tap pages 61, 62, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 Collet Chucks with ollow Tapers IN SK-25 R MINI TPR MQL 1) 2, rpm CNTRO P Tapered Version for PCM Mini escription Order-No. Form 2) α CPC8M-SK-25-=35 3) CPC11M-SK-25-=35 3) , tool insertion Tool insertion Range / 1,0 5,0 R8-P 1,0 7,0 R11-P PC8M PC M PC11M-I CPC16M-SK-25-=45 3) ,0 10,0 R16-P/ P/B PC MS PC16MS- I ccessories: pages 52, 53, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 1) MQL (minimal quantity lubrication) see page 5 2) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on pages 52 and 53 3) xtra short version, screw 34 FRION Tool clamping systems

35 α Collet Chucks with ollow Tapers IN SK-32 R MINI TPR α MQL 1) 2, rpm CNTRO P Tapered Version for PCM Mini escription Order-No. Form 2) α CP8M-SK-32-=50 3) CPC11M-SK-32-= ,5 tool insertion Tool insertion CPC16M-SK-32-= Range / 1,0 5,0 R8-P 1,0 7,0 R11-P 1,0 10,0 R16-P/ P/B PC8M PC M PC11M-I PC MS PC16MS-I ccessories: pages 52, 53, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 Collet Chucks with ollow Tapers IN SK-40 R MINI TPR MQL 1) 2, rpm CNTRO P Tapered Version for PCM Mini escription Order-No. Form 2) α tool insertion Tool insertion Range / CPC11M-SK-40-= ,0 7, CPC11M-SK-40-= , R11-P CPC16M-SK-40-= ,0 10, R16-P/ CPC16M-SK-40-= , P/B PC M PC11M-I PC MS PC16MS- I ccessories: pages 52, 53, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 1) MQL (minimal quantity lubrication) see page 5 2) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on pages 52 and 53 3) xtra short version, screw 35

36 α Collet Chucks with ollow Tapers IN SK-40 R STNR MQL 1) 2, rpm CNTRO P Version for PC escription Order-No. Form 2) tool insertion CP25-SK-40-=60 3) Tool insertion Range / 1,0 16,0 R25-P/P/B PC PC25-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 Collet Chucks with ollow Tapers IN SK-50 R MINI TPR MQL 1) 2, rpm CNTRO P Tapered Version for PCM Mini escription Order-No. Form 2) α tool insertion Tool insertion Range / CPC11M-SK-50-= ,0 7, CPC11M-SK-50-= , R11-P CPC16M-SK-50-= ,0 10, R16-P/ CPC16M-SK-50-= , P/B PC M PC11M-I PC MS PC16MS- I ccessories: pages 52, 53, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64,Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 1) MQL (minimal quantity lubrication) see page 5 2) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on pages 52 to 54 3) xtra short version, screw 36 FRION Tool clamping systems

37 Collet Chucks with ollow Tapers IN SK-50 R STNR MQL 1) 2, rpm CNTRO P Version for PC escription Order-No. Form 2) tool insertion Tool insertion CP25-SK-50-=70 3) Range / 1,0 16,0 R25-P/P/B PC PC25-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 Collet Chucks with ollow Tapers IN SK-63 R STNR MQL 1) 2, rpm CNTRO P Version for PC escription Order-No. Form 2) tool insertion Tool insertion CP32-SK-63-=70 4) Range / 2,0 20,0 R32-P/P/B PC PC32-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 1) MQL (minimal quantity lubrication) see page 5 2) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on page 54 3) Only stop screw S-CP16-U (thread M11x1) possible 4) xtra short version, screw 37

38 Collet Chucks with ollow Tapers IN SK-F63 R STNR 2, rpm CNTRO P Version for PC escription Order-No. Form 1) tool insertion Tool insertion CP32-SK-F63-=65 2) F Range / 2,0 20,0 R32-P/P/B PC PC32-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Taper Wipers page 65, Flex-one Brushes page 65 OZ STNR 2, rpm CNTRO P Version for PC escription Order-No. Form 1) tool insertion Tool insertion CP225-SK-F63-=75 2) F Range / 2,0 25,0 FM25-P PC PC225-I ccessories: page 55, Wrenches page 57, Mounting evices page 58, Precision page 62, Sealing iscs page 63, Taper Wipers page 65, Flex-one Brushes page 65 1) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on pages 54 and 55 2) xtra short version, screw 38 FRION Tool clamping systems

39 Collet Chucks with Polygonal Shanks ISO C4 () R STNR 2,5 CNTRO P Version for PC escription Order-No. Form 1) CP16-C4-= tool insertion CP20-C4-=55 2) Tool insertion Range / 1,0 10,0 R16-P/P/B 1,0 13,0 R20-P/P/B PC PC16-I PC PC20-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Coolant Supply Tubes and Wrenches page 66 Collet Chucks with Polygonal Shanks ISO C5 () R STNR 2,5 CNTRO P Version for PC escription Order-No. Form 1) CP16-C5-= ,0 10, CP16-C5-= R16-P/P/B CP20-C5-=60 2) tool insertion Tool insertion CP25-C5-=60 2) CP32-C5-=60 2) Range / 1,0 13,0 R20-P/P/B 1,0 16,0 R25-P/P/B 2,0 20,0 R32-P/P/B PC PC16-I PC PC20-I PC PC25-I PC PC32-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65 1) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on page 54 2) xtra short version, screw 39

40 Collet Chucks with Polygonal Shanks ISO C6 () R STNR 2,5 CNTRO P Version for PC escription Order-No. Form 1) CP16-C6-=60 2) ,0 10,0 30 CP16-C6-= R16-P/P/B CP20-C6-=60 2) CP20-C6-= CP25-C6-=60 2) CP25-C6-= CP25-C6-= CP25-C6-= CP32-C6-=60 2) tool insertion CP32-C6-= CP32-C6-= CP40-C6-=65 2) CP40-C6-= Tool insertion Range / 1,0 13,0 R20-P/P/B 1,0 16,0 R25-P/P/B 2,0 20,0 R32-P/P/B 3,0 26,0 R40-P/P/B PC PC16-I PC PC20-I PC PC25-I PC PC32-I PC PC40-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65 1) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on page 54 2) xtra short version, screw 40 FRION Tool clamping systems

41 Collet Chucks with Polygonal Shanks ISO C8 () R STNR 2,5 CNTRO P Version for PC escription Order-No. Form 1) CP32-C8-= tool insertion CP40-C8-= Tool insertion Range / 2,0 20,0 R32-P/P/B 3,0 26,0 R40-P/P/B PC PC32-I PC PC40-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65 Collet Chucks with Taper Shanks JIS B 6339 MS/BT30 () R MINI 2,5 CNTRO P Slim Version for PCM Mini escription Order-No. Form 1) tool insertion Tool insertion CP11M-BT30-= CP11M-BT30-= Range / 1,0 7,0 R11-P PC M PC11M-I ccessories: page 52, Wrenches page 57, Mounting evices page 58, Precision page 59, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Pull Studs pages 68, 69 1) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on pages 52 and 54 41

42 Collet Chucks with Taper Shanks JIS B 6339 MS/BT30 () R STNR 2,5 CNTRO P Version for PC escription Order-No. Form 1) CP16-BT30-= CP16-BT30-= CP16-BT30-= CP16-BT30-= CP20-BT30-= CP16-BT30-= CP16-BT30-= CP25-BT30-= CP25-BT30Z-= CP25-BT30Z-= CP25-BT30Z-= CP32-BT30Z-= CP32-BT30Z-= CP32-BT30Z-= tool insertion Tool insertion Range / 1,0 10,0 R16-P/P/B 1,0 13,0 R20-P/P/B 1,0 16,0 R25-P/P/B 2,0 20,0 R32-P/P/B PC PC16-I PC PC20-I PC PC25-I PC PC32-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Pull Studs pages 68, 69 1) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on page FRION Tool clamping systems

43 α Collet Chucks with Taper Shanks JIS B 6339 MS/BT40 ( /B) R MINI 2,5 CNTRO P Slim Version for PCM Mini escription Order-No. Form 1) CP11M-BTB40-= CP11M-BTB40-= CP11M-BTB40-= CP11M-BTB40-= /B CP16M-BTB40-= CP16M-BTB40-= CP16M-BTB40-= CP16M-BTB40-= tool insertion Tool insertion Range / 1,0 7,0 R11-P 1,0 10,0 R16-P/P/B PC M PC11M-I PC MS PC16MS-I ccessories: pages 52, 53, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Pull Studs pages 68, 69 R TPR 2,5 CNTRO P Tapered Version for PCC Special escription Order-No. Form 1) α tool insertion Tool insertion Range / CPC16-BTB40-= /B 24 4,5 CPC16-BTB40-= ,0 10,0 R16-P/ P/B PC C PC16C-I ccessories: page 53, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Pull Studs pages 68, 69 1) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on pages 52 and 53 43

44 Collet Chucks with Taper Shanks JIS B 6339 MS/BT40 ( /B) R STNR 2,5 CNTRO P Version for PC escription Order-No. Form 1) CP16-BT40-= CP16-BTB40-= /B CP16-BT40-= CP16-BTB40-= CP16-BTB40-= /B CP16-BTB40-= CP16-BTB40-= CP20-BTB40-= /B 32 CP20-BTB40-= CP25-BTB40-= /B CP25-BT40-= CP25-BTB40-= /B CP25-BT40-= CP25-BTB40-= CP25-BTB40-= /B CP25-BTB40-= CP25-BTB40-= CP32-BTB40-= /B CP32-BT40-= CP32-BTB40-= /B CP32-BT40-= CP32-BTB40-= CP32-BTB40-= /B CP32-BTB40-= tool insertion CP40-BT40-= CP40-BT40-= Tool insertion Range / 1,0 10,0 R16-P/P/B 1,0 13,0 R20-P/P/B 1,0 16,0 R25-P/P/B 2,0 20,0 R32-P/P/B 3,0 26,0 R40-P/P/B PC PC16-I PC PC20-I PC PC25-I PC PC32-I PC PC40-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Pull Studs pages 68, 69 1) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on page FRION Tool clamping systems

45 Collet Chucks with Taper Shanks JIS B 6339 MS/BT40 (/B) OZ STNR 2,5 F CNTRO P Version for PC escription Order-No. Form 1) tool insertion Tool insertion 2) F 2) CP225-BTB40-= /B Range / 2,0 25,0 FM25-P PC PC225-I ccessories: page 55, Wrenches page 57, Mounting evices page 58, Precision page 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Pull Studs pages 68, 69 T B 6, rpm SYNCRO T Tap insertion T escription Order-No. Form 2,8 7, Cutting range ST16-B-BTB40-= M3 M12 R16-B ST20-B-BTB40-= M3 M16 R20-B ST25-B-BTB40-= /B M3 M20 R25-B 25 ST32-B-BTB40-= M4 M27 R32-B ST40-B-BTB40-= M4 M33 R40-B ccessories: Wrenches page 57, Mounting evices page 58, Tap pages 61, 62, Taper Wipers page 65, Flex-one Brushes page 65, Pull Studs pages 68, 69 1) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on page 55 2) imension is for tool shanks 20 mm and dimension F is for tool shanks > 20 mm 45

46 Collet Chucks with Taper Shanks JIS B 6339 MS/BT50 ( /B) R STNR 2,5 CNTRO P Version for PC escription Order-No. Form 1) CP32-BT50-= tool insertion Tool insertion CP32-BTB50-= /B 53 CP32-BTB50-= CP40-BT50-= CP40-BT50-= Range / 2,0 20,0 R32-P/P/B 3,0 26,0 R40-P/P/B PC PC32-I PC PC40-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65, Pull Studs pages 68, 69 T B 6, rpm SYNCRO T Tap insertion T escription Order-No. Form 2,8 7, Cutting range ST16-B-BTB50-= M3 M12 R16-B ST20-B-BTB50-= M3 M16 R20-B ST25-B-BTB50-= /B M3 M20 R25-B 25 ST32-B-BTB50-= M4 M27 R32-B ST40-B-BTB50-= M4 M33 R40-B ccessories: Wrenches page 57, Mounting evices page 58, Tap pages 61, 62, Taper Wipers page 65, Flex-one Brushes page 65, Pull Studs pages 68, 69 1) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on page FRION Tool clamping systems

47 α Collet Chucks with Taper Shanks NSI B.50 CT40 (/B) R MINI 1 2,5 CNTRO P Slim Version for PCM Mini escription Order-No. Form 1 2) tool insertion Tool insertion CP11M-CT40-=4 2) /B 16 44, CP11M-CT40-=5 2) Range / 1,0 7,0 R11-P PC M PC11M-I ccessories: page 52, Wrenches page 57, Mounting evices page 58, Precision page 59, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65 R TPR 1 2,5 CNTRO P Tapered Version for PCC Special escription Order-No. Form 1 2) α tool insertion Tool insertion CPC16-CT40-=4 2) , /B 30 44,45 29 CPC16-CT40-=6 2) , Range / 1,0 10,0 R16-P/ P/B PC C PC16C-I ccessories: page 53, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65 1) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on pages 52 and 53. 2) CT40 is supplied with thread 5/8-11 UNC complying with NSI B

48 Collet Chucks with Taper Shanks NSI B.50 - CT40 (/B) R STNR 1 2,5 CNTRO P Version for PC escription Order-No. Form 1 2) CP16-CT40-=2,5 2) ,5 75 CP16-CT40-=4 2) CP16-CT40-=5 2) CP20-CT40-=3 2) CP20-CT40-=4 2) CP25-CT40-=4 2) /B 44,45 CP32-CT40-=3 2) CP32-CT40-=4 2) CP32-CT40-=5 2) tool insertion Tool insertion CP32-CT40-=6 2) CP40-CT40-=4 2) Range / 1,0 10,0 R16-P/ P/B 1,0 13,0 R20-P/ P/B 1,0 16,0 R25-P/ P/B 2,0 20,0 R32-P/ P/B 3,0 26,0 R40-P/ P/B PC PC16-I PC PC20I PC PC25-I PC PC32-I PC PC40-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65 1) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on page 54 2) CT40 is supplied with thread 5/8-11 UNC complying with NSI B FRION Tool clamping systems

49 Collet Chucks with Taper Shanks NSI B.50 - CT50 (/B) R STNR 1 2,5 CNTRO P Version for PC escription Order-No. Form 1 2) tool insertion CP16-CT50-=4 2) CP16-CT50-=6 2) CP20-CT50-=4 2) CP20-CT50-=6 2) CP25-CT50-=4 2) /B 40 69,85 CP25-CT50-=6 2) CP32-CT50-=4 2) CP32-CT50-=6 2) CP40-CT50-=4 2) CP40-CT50-=6 2) Tool insertion Range / 1,0 10,0 R16-P/ P/B 1,0 13,0 R20-P/ P/B 1,0 16,0 R25-P/ P/B 2,0 20,0 R32-P/ P/B 3,0 26,0 R40-P/ P/B PC PC16-I PC PC20-I PC PC25-I PC PC32-I PC PC40-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65 1) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1 under on page 54 2) CT50 is supplied with thread 1-8 UNC complying with NSI B

50 Collet Chucks with Cylindrical Shank () Z R MINI L1 L2 CNTRO P Tool xtension for PCM Mini escription Order-No. Z L1 L2 1) CP8M-Z10-L= CP8M-Z10-L= CP11M-Z16-L= CP11M-Z16-L= CP16M-Z16-L= CP16M-Z20-L= CP16M-Z20-L= tool insertion 68 Tool insertion Range / 1,0 5,0 R8-P 1,0 7,0 R11-P 1,0 10,0 R16-P/ P/B PC8M PC M PC11M-I PC MS PC16MS-I ccessories: pages 52, 53, Wrenches page 57, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65 T B SYNCRO T with Shank IN 1835 B+ Tap insertion T escription Order-No. Z 2,8 7, Cutting range ST16-B-Z20-= ST16-B-Z25-= M3 M12 R16-B ST20-B-Z20-= ST20-B-Z25-= M3 M16 R20-B ST25-B-Z20-= ST25-B-Z25-= M3 M20 R25-B ST32-B-Z25-= ST32-B-Z25-= M4 M27 R32-B ST32-B-Z32-= ST40-B-Z25-= ST40-B-Z32-= M4 M33 R40-B ccessories: Wrenches page 57, Tap pages 61, 62, Taper Wipers page 65, Flex-one Brushes page 65 1) L2 applies to without Sealing iscs, for with Sealing iscs see dimension 1) under on pages 52 and FRION Tool clamping systems

51 Collet Chucks with Taper Shanks Similar IN (Wood Working) R STNR 2,5 CNTRO P Version for PC (without driving and positioning slot) escription Order-No. Form 1) tool insertion Tool insertion Range / CP32-30-= CP32-30-= ,0 20,0 R32-P/P/B PC PC32-I ccessories: page 54, Wrenches page 57, Mounting evices page 58, Precision pages 59, 60, Tap pages 61, 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65 OZ STNR 2,5 F CNTRO P Version for PC escription Order-No. Form 1) tool insertion Tool insertion 2) F 2) CP = Range / 2,0 25,0 FM P PC PC225-I ccessories: page 55, Wrenches page 57, Mounting evices page 58, Precision page 62, Sealing iscs page 63, Stop Screws page 64, Taper Wipers page 65, Flex-one Brushes page 65 1) imension applies to without Sealing iscs. For with Sealing iscs see dimension 1) under on pages 54 and 55 2) imension is for tool shanks 20 mm and dimension F is for tool shanks > 20 mm 51

52 ccessories PC R L Mini PCM escription Order-No. Range L for Collet Chucks for PC8M ,0 5, CP8M R8-P PC11M ,0 7, ,2 CP11M CPC11M R11-P PC16MS ,0 10,0 PC16M ,9 CP16M CPC16M R16-P/P/B = with extremely small dimensions and for high speeds = only the nominal diameter can be clamped R Mini PCM-I - sealed L escription Order-No. iameter L 1) for Collet Chucks for PC11M-I Ø=3, ,0 PC11M-I Ø=4, ,0 PC11M-I Ø=5, ,0 PC11M-I Ø=6, ,0 PC11M-I Ø=7, , ,7 +2,5 CP11M CPC11M R11-P = with extremely small dimensions and for high speeds = for direct sealing (for internal coolant supply or for sealing against any ingress of dirt) = depending on tool shank Ø a Nut is required = only the nominal diameter can be clamped ue to their design I are longer than standard (-dimension see product pages 16 to 51 plus 1) ) R Collet xtractor Z-R for Mini PCM escription Order-No. for Nut for Z-R PC8M R8-P Z-R PC11M-I R11-P = for extraction of the Collet out of the Nut 52 FRION Tool clamping systems

53 ccessories PC R Mini PCM-I for Sealing iscs L escription Order-No. Range L 1) for Collet Chucks for PC16MS-I ,0 10,0 PC16M-I ,9 +3 CP16M CPC16M R16-P/P/B = with extremely small dimensions and for high speeds = for Sealing iscs (for internal coolant supply or for sealing against any ingress of dirt) = only the nominal diameter can be clamped ue to their design I are longer than standard (-dimension see product pages 16 to 51 plus 1) ) R Special PCC (tapered) L escription Order-No. Range L for Collet Chucks for PC16C ,0 10, ,2 CPC16 R16-P/P/B = tapered for mould-making industry = only the nominal diameter can be clamped R L Special PCC-I (tapered) for Sealing iscs escription Order-No. Range L 1) for Collet Chucks for PC16C-I ,0 10, ,2 +3 CPC16 R16-P/P/B = tapered for mould-making industry = for Sealing iscs (for internal coolant supply or for sealing against any ingress of dirt) = only the nominal diameter can be clamped ue to their design I are longer than standard (-dimension see product pages 16 to 51 plus 1) ) 53

54 ccessories PC R L PC escription Order-No. Range 1) L for Collet Chucks for PC ,0 10, ,4 CP16 R16-P/P/B PC ,0 13, ,6 CP20 R20-P/P/B PC ,0 16, ,6 CP25 R25-P/P/B PC ,0 20, ,9 CP32 R32-P/P/B PC ,0 26, ,5 CP40 R40-P/P/B = for high speeds = for very precise clamping of PC tools = only the nominal diameter can be clamped R L PC-I for Sealing iscs escription Order-No. Range L for Collet Chucks for PC16-I ,0 10, ,4 +3 CP16 R16-P/P/B PC20-I ,0 13, ,6 +3 CP20 R20-P/P/B PC25-I ,0 16, ,9 +3,3 CP25 R25-P/P/B PC32-I ,0 20, ,1 +3,2 CP32 R32-P/P/B PC40-I ,0 26, ,8 +3,3 CP40 R40-P/P/B = for high speeds = for very precise clamping of PC tools = for Sealing iscs (for internal coolant supply or for sealing against any ingress of dirt) = only the nominal diameter can be clamped ue to their design I are longer than standard (-dimension see product pages 16 to 51 plus 1) ) 54 FRION Tool clamping systems

55 ccessories PC OZ L PC escription Order-No. Range L for Collet Chucks for PC ,0 25, ,2 CP225 FM25 P PC ,0 32, CP432 FM32 = for high speeds = for very precise clamping of PC tools = only the nominal diameter can be clamped OZ L PC-I for Sealing iscs escription Order-No. Range L 1) for Collet Chucks for PC225-I ,0 25, ,2 +4 CP225 FM25 P PC432-I ,0 32, CP432 FM32 = for high speeds = for very precise clamping of PC tools = for Sealing iscs (for internal coolant supply or for sealing against any ingress of dirt) = only the nominal diameter can be clamped ue to their design I are longer than standard (-dimension see product pages 16 to 51 plus 1) ) 55

56 ccessories SS R L SS escription Order-No. Range L for Collet Chucks for CP16 -SS -Ø-0, ,0 10, ,3 CP16 R16-P CP20-SS-Ø-0, ,0 13, ,8 CP20 R20-P CP25-SS-Ø-0, ,0 16, ,8 CP25 R25-P CP32-SS-Ø-0, ,0 20, ,9 CP32 R32-P CP40-SS-Ø-0, ,0 26, ,6 CP40 R40-P = for clamping SS tools = limited speed (pre-balanced) = with collapse (minus 0,4 mm) R L SS-I for Sealing iscs escription Order-No. Range L 1) for Collet Chucks for CP16-SS-I-Ø-0, ,0 10, ,8 +2,5 CP16 R16-P CP20-SS-I-Ø-0, ,0 13, ,9 +3,1 CP20 R20-P CP25-SS-I-Ø-0, ,0 16, ,8 +3 CP25 R25-P CP32-SS-I-Ø-0, ,0 20, ,2 +3,3 CP32 R32-P CP40-SS-I-Ø-0, ,0 26, ,6 +3 CP40 R40-P = for clamping SS tools = limited speed (pre-balanced) = for Sealing iscs (for internal coolant supply or for sealing against any ingress of dirt) = with collapse (minus 0,4 mm) ue to their design I are longer than standard (-dimension see product pages 16 to 51 plus 1) ) 56 FRION Tool clamping systems

57 ccessories Wrenches RO RO R OZ B Ingeniously simple, simply ingenious! Our Roller Bearing Wrenches are designed for safe, quick and simple clamping of tools without any risk of injury to the user, because they cannot slip off the clamping nuts. They are available in two versions: with standard handle or with square drive adapter for deined clamping of tools using a torque wrench. Our Roller Bearing Wrenches are suitable for: = all CNTRO P and all complying with IN ISO (R/SX) with external diameters 10 /16 /22 /24 /30 /32 /35 /40 /42 /50 and 63 mm. = all without grooves and drilling, which is more positive at high speeds because of improved weight properties and quiet running. Roller Bearing Wrenches RO with andle escription Order-No. for RO PC8M RO PC11M PC11M-I RO PC16MS PC16MS-I RO PC16M PC16M-I PC16C PC16C-I RO RO RO RO RO PC16 PC16-I CP16-SS-Ø-0,4 CP16-SS-I-Ø-0,4 ST16-B PC20 PC20-I CP20-SS-Ø-0,4 CP20-SS-I-Ø-0,4 ST20-B PC25 PC25-I CP25-SS-Ø-0,4 CP25-SS-I-Ø-0,4 ST25-B PC32 PC32-I CP32-SS-Ø-0,4 CP32-SS-I-Ø-0,4 ST32-B PC225 PC225-I PC40 PC40-I CP40-SS-Ø-0,4 CP40-SS-I-Ø-0,4 ST40-B PC432 PC432-I Roller Bearing eads RO escription Order-No. VKT for RO x12 PC11M PC11M-I RO PC16MS PC16MS-I RO PC16M PC16M-I PC16C PC16C-I RO RO RO RO RO x18 PC16 PC16-I CP16-SS-Ø-0,4 CP16-SS-I-Ø-0,4 ST16-B PC20 PC20-I CP20-SS-Ø-0,4 CP20-SS-I-Ø-0,4 ST20-B PC25 PC25-I CP25-SS-Ø-0,4 CP25-SS-I-Ø-0,4 ST25-B PC32 PC32-I CP32-SS-Ø-0,4 CP32-SS-I-Ø-0,4 ST32-B PC225 PC225-I PC40 PC40-I CP40-SS-Ø-0,4 CP40-SS-I-Ø-0,4 ST40-B PC432 PC432-I 57

58 ccessories Wrenches MS R OZ B Torque Setting Wrenches MS escription Order-No. VKT Torque range for Roller Bearing ead MS Nm RO RO MS x Nm RO RO RO MS Nm RO RO RO RO MS Nm RO RO RO RO 14x18 MS Nm RO63 (for CP432) ccessories Mounting evices TBRS R OZ B Mounting evices TBRS with Roller Bearing escription Order-No. for holder shanks TBRS SK25 TBRS SK32 C3 TBRS SK40 C4 TBRS MS/BT30 TBRS SK30 SK50 C5 TBRS SK40 SK63 C6 MS/BT40 CT40 TBRS SK80 C8 TBRS ,5 SK50 TBRS SK100 MS/BT50 CT50 = for easy and safe clamping of holder shanks at the lange using rollers for mounting and removing cutting tools, therefore self clamping and ideal for SK forms and F as well as polygonal shanks = for all common holder shanks such as SK (IN 69871), SK (IN forms, B, C,,, F), polygonal shanks (ISO ), MS/BT (JIS B 6339) and CT (NSI B5.50) 58 FRION Tool clamping systems

59 ccessories Precision R-P IN ISO B (R/SX) R Precision R-P 2 μm for R11-P to R40-P escription Order-No. L Profile from to steps 4004 R8-P 4008 R11-P 426 R16-P 428 R20-P 430 R25-P 470 R32-P 472 R40-P ,0 5,0 0,5 5 μm 8,5 13, /16 1/8 3/ ,0 7,0 0,5 2 μm 11, /16 1/8 3/16 1/ μm 17 27,5 1,0 10,0 0,5 1,1 1,4 + 1,6 1,9 + 2,1 2,4 0,1 2,6 2,9 + 3,1 3,4 + 3,6 3,8 0,1 5,6 6,3 7,1 1/16 3/32 1/8 5/32 3/16 7/32 1/4 9/32 5/16 11/32 3/8 13/ ,0 13,0 0,5 2 μm 21 31, /8 3/16 1/4 5/16 3/8 7/16 1/ ,0 16,0 0,5 2 μm /8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/ ,0 20,0 0,5 2 μm /8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/ ,0 26,0 0,5 2 μm /4 3/8 1/2 5/8 3/4 7/8 1 Ordering xample Complete Order-No. with the diameter, e.g. R32-P Ø 6 mm = Order-No resp. Ø 1/8 = Order-No Inch conversion table please see page 71 at the bottom! 59

60 ccessories Precision Coolant R-P Similar IN ISO R Precision Coolant R-P with Seals for IC (Inner Coolant Supply) 2 μm escription Order-No. L Profile from to steps 425 R16-P 427 R20-P 429 R25-P ,0 10,0 1,0 2 μm 16,7 27, /8 3/16 1/4 5/16 3/ ,0 13,0 1,0 2 μm 20,7 31, /8 3/16 1/4 5/16 3/8 7/16 1/ ,0 16,0 1,0 2 μm 25, /8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/ ,0 20,0 1,0 469 R32-P 2 μm 32, /8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 471 R40-P μm 40,7 46 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 22,0 25,0 ccessories Precision Coolant R-P Similar IN ISO R Precision Coolant R-P with Seals for IC (Inner Coolant Supply) and Jet oles 2 μm escription Order-No. L Profile Standard bore 429 R25-P μm 25,7 34 4,0 6,0 8,0 10,0 12,0 14,0 469 R32-P μm 32,7 40 4,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 Ordering xample Complete Order-No. with the diameter, e.g. R20-P Ø 8 mm = Order-No resp. Ø 3/16 = Order-No Inch conversion table please see page 71 at the bottom! Use of shanks with lateral lat with R-P Incorrect Position! Correct Position! 60 FRION Tool clamping systems

61 ccessories Tap R-B Similar IN ISO R B Tap R-B with Internal Square rive and Seals for IC (Inner Coolant Supply) 10 μm escription Order-No. L L2 Proile 4031 R16-B μm 16,7 27, R20-B μm 20,7 31, R25-B μm 25, R32-B μm 32, R40-B μm 40, Ordering xample Standard bore (Shank-Ø/Square) / 2,8/2,1 / 22 /, /,, /, 18 / 22 /, /,, /, Complete Order-No. with the diameter, e.g. R40-B Ø 8/6,3 mm = Order-No , /,, /,, /,, /,, /,, /,, /,, /,, /,, /,, /,, /,, /,, /,, /,, /,, /,, /, 25 /, /,, /,, /, 18 / 22 /, /,, /, 25 / 18 / 22 /, /,, /, 25 /, /,, /,, /,, /,, /,, /,, /,, /,, /,, /,, /,, /,, /,, /,, /, 6,0/12,5, /,, /,, /,, /,, /,, /,, /,, /5,6, /,, /,, /,, /,, /,, /, 6,0/12,5 30 /, /,, /, 18 /, /,, /,, /,, /, 22 / ww 25 / ww 33 / ww, /,, /,, /,, /,, /,, /,, /,, /, 6,0/12,5, /,, /,, /,, /, 61

62 ccessories Tap R-B Similar IN ISO R B Tap R-B with Internal Square rive, Seals for IC (Inner Coolant Supply) and Jet oles 10 μm escription Order-No. L Profile 4276 R20-B μm 20,7 31,5 / ww 4537 R32-B μm 32,7 40 / ww Standard bore (Shank-Ø/Square), /,, /,, /,, /,, /,, /,, /,, /,, /,, /,, /,, /,, /,, /,, /,, /,, /, ccessories Precision OZ--P IN ISO B OZ Precision OZ--P (double slotted) 3 μm escription Order-No. L Profile Standard bore 462 FM25-P μm 35, ,0 4,0 6,0 8,0 10,0 12,0 14,0 16,0 18,0 20,0 25,0 Ordering xample Complete Order-No. with the diameter, e.g. FM25-P Ø 20 mm = Order-No ccessories Precision OZ- IN ISO B OZ Precision OZ- (double slotted) 6 μm resp. 10 μm escription Order-No. L Profile from to steps ,0 25,0 0,5 462 FM25 6 μm 35, /8 1/4 3/8 1/2 5/8 3/ FM μm 43,7 60 4,0 32,0 0,5 62 FRION Tool clamping systems

63 ccessories Sealing iscs I I R I ,6 1,0 10,0 0, /8 3/16 1/4 5/16 3/8 I ,8 2,0 13,0 PC16MS-I PC16M-I PC16C-I PC16-I PC20-I R16-P R20-P I ,2 2,0 16,0 0,5 PC25-I R25-P 2 +0,4/-0, ,0 20,0 I32 I40 Sealing iscs I escription Order-No. L Profile from to steps range ,2 34,2 L 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 3,0 26,0 0,5 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 Ordering xample Complete Order-No. with the diameter, for PC32-I PC40-I e.g. I32 Ø 16 mm = Order-No resp. Ø 1/2 = Order-No Inch conversion table please see page 71 at the bottom! for R32-P R40-P OZ Sealing iscs I escription Order-No. L Profile from to steps range for for I225 (S50) ,0 25,0 PC225-I FM25 P 4 1,0-0,5 I432 (S60) ,0 32,0 PC432-I FM32 ccessories ata Carrier BIS R OZ B ata Carrier BIS (BLLUFF) escription Order-No. for Collet Chucks BIS C /L all Все SK- 63

64 ccessories djustable Stop Screws S-U S-W L1 SW1 SB R OZ djustable Stop Screws S-U escription Order-No. SW1 SB L1 for Collet Chucks S-CP11-U M8x1 4 CP M CPC M 1,6 8 S-CP16-U M11x1 6 CP M CPC M CP CPC S-CP20-U M14x1 5 1,5 CP CP CP S-CP25/32/225-U M18x2,5 (for old chuck types) 10 S-CP25-U M18x1,5 CP25 6 1,6 CP CP (for collet chuck S-CP32/225-U M22x1,5 series available fall 2011) CP20 S-CP40-U M28x1,5 25 CP40 L2 L1 SW1 SB R OZ djustable Stop Screws S-W escription Order-No. SW1 SB L1 L2 for Collet Chucks S-CP11-W M8x1 4 S-CP16-W M11x1 S-CP25/32/225-W M18x2,5 6 1, ,5 CP M CPC M 22 7 S-CP25-W M18x1,5 1, CP25 S-CP32/225-W M22x1, ,5 CP M CPC M CP CPC (for old chuck types) CP CP CP (for old chuck types) CP CP (for collet chuck series available fall 2011) 64 FRION Tool clamping systems

65 ccessories Taper Wipers KWK R B Taper Wipers KWK-R escription Order-No. for Chucks and olders Type KWK-R CP11M KWK-R CP16 CPC16 CP16M ST16-B KWK-R CP20 ST20-B KWK-R CP25 ST25-B KWK-R CP32 ST32-B for cleaning of the collet closing taper ccessories Flex-one Brushes F Flex-one Brushes We recommend the use of Flex-one Brushes for cleaning the bore of the collets. These brushes are lexible and oversized at the beginning, so that they can be used for slightly bigger diameters when new. fterwards they can also be used for smaller diameters until they need to be replaced. Instructions for use Flex-one Brushes should be rotated when inserted into and removed from the collet. Use either a standard commercially available honing oil or drilling emulsion! The speed should be between 60 to 600 r.p.m. depending on the diameter. R OZ B escription Flex-one Brushes F Order-No. vailable measurements (please indicate Ø when ordering) F-BC 180 SC , , ,2 25,4 Ordering xample Complete Order-No. with the diameter, e.g. F-BC 180 SC Ø 12,7 mm = Order-No

66 ccessories Coolant Supply Tubes and Wrenches IKR SCL-IKR R OZ B Coolant Supply Tubes IKR escription Order-No. for SK Form IKR-SK M10x1 IKR-SK M12x1 IKR-SK M16x1 and IKR-SK M18x1 IKR-SK M20x1,5 IKR-SK M24x1,5 R OZ B Wrenches SCL-IKR for Coolant Supply Tubes escription Order-No. for SK SCL-IKR-SK SCL-IKR-SK SCL-IKR-SK SCL-IKR-SK SCL-IKR-SK SCL-IKR-SK FRION Tool clamping systems

67 ccessories Pull Studs ZB R OZ B Pull Studs ZB IN with bore escription Order-No. L1 L α for Taper Shanks ZB30-IN M ZB40-IN M ZB50-IN M R OZ B Pull Studs ZB IN B without bore escription Order-No. L1 L α for Taper Shanks ZB30-IN-B M ZB40-IN-B M ZB50-IN-B M R OZ B Pull Studs ZB ISO 7388/II-B with bore escription Order-No. L1 L α for Taper Shanks ZB40-ISO ,5 16,4 18,95 12,95 17 M ZB50-ISO , ,6 25 M R OZ B Pull Studs ZB ISO 7388-B without bore escription Order-No. L1 L α for Taper Shanks ZB40-ISO-B ,5 16,4 18,95 12,95 17 M ZB50-ISO-B , ,6 25 M

68 ccessories Pull Studs ZB R OZ B Pull Studs ZB IN 2080 with inner thread escription Order-No. L1 L α for Taper Shanks ZB40-IN ,6 17 M ZB50-IN ,1 39, M R OZ B Pull Studs ZB MS/BT 45 (JIS B 6339) with bore escription Order-No. L1 L α for Taper Shanks ZB30-BT ,5 M ZB40-BT M ZB50-BT M R OZ B Pull Studs ZB MS/BT 30 (JIS B 6339) with bore escription Order-No. L1 L α for Taper Shanks ZB30-BT ,5 M ZB40-BT M ZB50-BT M R OZ B Pull Studs ZB MS/BT 90 (JIS B 6339) with bore escription Order-No. L1 L α for Taper Shanks ZB30-BT ,5 M ZB40-BT M ZB50-BT M FRION Tool clamping systems

69 ccessories Pull Studs ZB R OZ B Pull Studs ZB MS/BT 45 (JIS B 6339) without bore escription Order-No. L1 L α for Taper Shanks ZB30-BT-45 -B ,5 M ZB40-BT-45 -B M ZB50-BT-45 -B M R OZ B Pull Studs ZB MS/BT 30 (JIS B 6339) without bore escription Order-No. L1 L α for Taper Shanks ZB30-BT-30 -B ,5 M ZB40-BT-30 -B M ZB50-BT-30 -B M R OZ B Pull Studs ZB MS/BT 90 (JIS B 6339) without bore escription Order-No. L1 L α for Taper Shanks ZB30-BT-90 -B ,5 M ZB40-BT-90 -B M ZB50-BT-90 -B M

70 igh Performance Power System Maxi RIP R OZ Basic device M with and Inductor ø 63 mm and Reduction to ø 50 mm escription Order-No. ø for Collet Chucks M1 co (380 В) V) и and 63 мм 63 mm CP CP CP CP32 CP225 CP CP CP40 CP432 R OZ Coolant Bath KW escription Order-No. for holder shanks KW SK40 SK63 C6 MS/BT40 CT40 R OZ Mounting evice TBRS-KW with Roller Bearing incl. installation parts for ixing on a work bench escription Order-No. for holder shanks TBRS63-KW SK40 SK63 C6 MS/BT40 CT40 70 FRION Tool clamping systems

71 Information Conversion Table Conversion of inch to metric, which is in accordance with the last 4 digits of the order number: 1/16 = 1/ = /32 3/32 = = /8 1/8 = 0318 = 5/32 5/32 = 0397 = 3/16 3/16 = 0476 = /32 7/32 = = /4 1/4 = 0635 = /32 9/32 = 0714 = /16 = 5/ = /32 11/32 = = /8 3/8 = 0953 = 13/32 13/32 = 1032 = 7/16 7/16 = 1111 = /2 1/2 = = /16 9/16 = 1429 = /8 = 5/ = /16 11/16 = 1746 = /4 3/4 = = /16 13/16 = 2064 = 7/8 7/8 = 2223 = 1 = = 2540 Ordering xample Collet Chuck + Nut + Sealing isc e.g. CP32-B40-=100 e.g. PC32 none e.g. CP32-B40-=100 e.g. PC32-I e.g. I32 + Collet + ccessories e.g. R32-P e.g. R32-P e.g. R32-B e.g. R32-P Wrenches, djustable Stop Screws, Taper Wipers, Flex-one Brushes, Coolant Supply Tubes, Pull Studs, Mounting evices In order to guarantee the highest possible lexibility of the Precision Collet Chuck CNTRO P, the Collet Chucks,, and the accessories MUST be ordered separately. Please do not hesitate to contact us if you require a version that is not included in this catalogue. 71

72 FRION, an owner-run company, is synonymous with unique, high-quality tool and workpiece clamping systems. With over 100 years of experience and a pronounced drive to be perfect, FRION is continuously developing new products and technologies. The company enjoys a technical lead that is based on innovation and design intelligence, and also on superior quality that is Made in ermany. The solid reputation of FRION s products is no coincidence. They are as precise as the company itself: focused 100 percent on the customer s requirements, absolutely reliable, and always one step ahead. Tool clamping Tool clamping systems Workpiece clamping precise. powerful. intelligent. FRION Vertriebs-mb Forststrasse Kaisersbach ermany Phone Fax info@fahrion.de // medienmaler.de