INFORMATION AMP TEKNIK A/S.

Transcription

1

2 DIAMOND TOOLS Electroplated, electroformed, metal bond and resin bond diamond tools are used on various materials because of very fast clean cutting, long life, versatility of design and relatively low cost. Replate and retip services, at very competitive prices, many products of our own manufacture and also other manufacturer s tooling. Please look out for these symbols: INFORMATION The information in this catalogue is given as a guide only and we reserve the right to alter, amend and delete prices, speci!cations and product availability without prior notice. AMP TEKNIK A/S Glentevej Køge - Danmark Tlf.: (0045) Fax: (0045) Ref: 1701NP

3 Page No A-B-C Page No F-G-H Fein Oscillating Machine Fein Oscillating Blades Fein Triangular Pads 35, 35, 35 GRINDING Groove Wheel GRP/GRE Pipe Tools Gulleted Saw Hand Files (Electro!ex) HAND MACHINES Hand Pads Hi Di Routers Holesaws Holesaw Arbors I-J-K Integral Spindle Saws Jigsaw Blades Jigsaw Machine Jig Trimming Guide, SE ACCESSORIES AS70 Angle Saw Machine AS100 Angle Grinder AS100 Angle Saw Machine AS15 Angle Saw Machine Air Belt Polisher Air Powered Machines Bandsaw Blades Blades Bosch Jigsaw Machine Calibration Drums Chamfer Rings Chamfer Wheel Continuous Rimmed Saw Core Drills Corrugated Toothed Saw Countersinks , CUTTING 1-7 D Dia Dry Discs Diagrit Water Chucks Dia Met Hand Pads Disc Accessories, AS100 Disc Accessories, Q-R D-Loc Discs Dome Ended Routers Drill Countersinks L-M-N M14 Backed Discs M14 Drums Mandrels, D-Loc Metal Bond Core Drills Narrow Belts Needle Files DRILLING Drum Accessories, Q-R E Electro!ex Belts Electro!ex Discs Electro!ex Drums Electro!ex Hand Files Electro!ex Hand Pads Electro!ex Pads O-P Oil Mist Lubricator Oscillating Blades Parallel Routers PCD Tipped Tools Pendulum Blade Piercing Routers Plastic Wedges Pneumatic Jigsaw Machine Pneumatic Wet Polisher Pyramid Saws

4 Page No Q Q-R Pneumatic Machine QRS Backing Discs 33 R-S-T Rebating Attachment, SE0 Re-dress Service Reka Tools Router Accessories, SE0 Router Accessories, SE ROUTING Routing Machine Saws Saw Accessories, AS70 Saw Accessories, AS100 Saw Accessories, AS15 Saw Accessories, SE0 Saw Accessories, SE50 Side Spoke Saws SE0 Machine SE50 Machine Serrated Edged Saw Special Tools Spindle Saws Stop Wheel Strip & Re-plate Service Surface Planers Technical Speci!cations Titan Dry Grinding Discs Trimming Machine , U-V Variable Speed Machine Vortex Cutters W-X-Y-Z Water Chucks Wedges Wind Turbine

5 DIAMOND SAWS FOR THE COMPOSITES INDUSTRY As one of the world leaders in diamond blade technology we are pleased to offer a complete range of high quality diamond blades for the Composites Industry. We offer the majority of our blades from stock but we also have the ability to manufacture a diamond blade to your speci cations/requirements. APPLICATIONS CONTINUOUS RIM: For fast straight line cutting with long life - see page. SIDE SPOKE: Engineered to cut curves without jamming - see page 3. GULLETED: Fast cutting with gullets allowing cooling action - see page 4. PYRAMID: For straight line cutting and heavy duty trimming and grinding - see page 5. CORREGATED TOOTHED: Specialized blade for Carbon/Kevlar type materials - see page 5. INTEGRAL SPINDLE: Used for close intricate work - see page. OSCILLATING: For stock removal/trimming in awkward areas - see page. BANDSAW: High quality diamond bandsaw - see page 7. JIGSAWS: Free cutting with clean nish - see page 7. 1

6 CONTINUOUS RIM SAWS For fast straight cutting of materials. Can be used in hand tools or on stationary machines at speeds between 1500 and 3000 surface metres per minute. Diameters 5-700mm Can be supplied in a variety of diamond grades and widths. Normally saws over 40mm diameter are coated with 3mm down the sides and the larger saws have a deeper coating. Saws are made with bore sizes to suit customers requirements which should be stated on order. Saws coated in grit are approximately 0.4mm wider than nominal width. CONTINUOUS RIM CONTINUOUS RIM ELECTROPLATED DIAMOND BLADE WIDTH ESC005 ESC05 ESC045 ESC05 ESC077 ESC085 *ESC135 ESC145 ESC14 ESC17 *ESC15 ESC175 ESC05 ESC55 ESC85 ESC305 ESC335 ESC355 ESC375 ESC405 ESC45 ESC455 ESC475 Other sizes available, prices on request. Technical Speci cation: Page 38 OTHER RELATED PRODUCTS HAND MACHINES - Pages /0 *ESC010 *ESC030 *ESC050 *ESC070 *ESC089 *ESC090 *ESC140 *ESC150 ESC1 ESC18 *ESC170 *ESC180 ESC10 ESC0 *ESC90 *ESC310 *ESC340 *ESC30 *ESC380 ESC410 ESC430 ESC40 ESC480

7 SIDE SPOKE SAWS This design allows the blade to cut curves without jamming or stalling the machine. Diameters 5-700mm Note: Can be supplied in a variety of diamond grades and widths. Also with 3 or 4 side spokes each side. Normally supplied with 3 spokes each side. Larger sizes can be supplied with 4 spokes per side. Saws are made with bore sizes to suit customers requirements which should be stated on order. Saws coated in grit are approximately 0.4mm wider than nominal width. SIDE SPOKE SPOKES EACH SIDE WIDTH ESS505 ESS55 ESS535 *ESS545 ESS55 *ESS555 *ESS55 ESS571 ESS15 *ESS585 ESS595 ESS05 ESS5 ESS35 ESS45 ESS55 ESS5 ESS75 ESS85 ESS95 ESS705 ESS715 ESS75 ESS735 ESS745 ESS755 ESS75 ESS775 44/0 ESS510 *ESS530 *ESS540 *ESS550 *ESS553 *ESS50 *ESS570 ESS57 *ESS0 *ESS590 ESS00 ESS10 ESS30 ESS40 ESS50 ESS0 ESS70 ESS80 ESS90 ESS700 ESS710 ESS70 ESS730 ESS740 ESS750 ESS70 ESS770 ESS780 ELECTROP OPLATED DIAMOND OP ELECTROPLATED SIDE SPOKE SAW Other sizes available, prices on request. Technical Speci cation: Page 38 OTHER RELATED PRODUCTS When ordering please state Code. *Denotes ex-stock HAND MACHINES - Pages

8 GULLETED SAWS The gullets allow clearance and cool cutting. Ideal for fast aggressive cutting of sheets, pipes and all materials over 0mm thick. Diameters mm Can be supplied in a variety of diamond grades and widths. Normally saws are coated a minimum 3mm down the sides and are made with bore sizes to suit customers requirements which should be stated on order. Saws coated in grit are approximately 0.4mm wider than nominal width. Silent centre saws are available on request. These saws lower the level of noise produced. GULLETED SAWS WIDTH ESG405 ESG415 ESG505 ESG515 ESG545 ESG55 ESG595 ESG15 ESG45 ESG5 ESG85 ESG715 ESG755 ESG805 ESG855 44/0 ESG410 ESG40 *ESG510 ESG50 ESG550 ESG570 ESG00 ESG0 ESG50 ESG70 ESG90 ESG70 ESG70 ESG810 ESG80 Other sizes available, prices on request. ELECTROPLATED DIAMOND GULLETED BLADE Technical Speci cation: Page 38 OTHER RELATED PRODUCTS HAND MACHINES - Pages

9 CORRUGATED TOOTHED SAW Diamond coated 44/0 saw with serrated teeth for Kevlar, Twaron and Aramid bres and also recommended for Carbon/Kevlar and Glass/ Kevlar woven composite materials. The serrated teeth help to shear the bre. Diameters 50-00mm CORRUGATED TOOTHED SAW WIDTH 44/0 *ESCK050A ESCK070 ESCK090 ESCK140 ESCK170 ESCK80 SERRATED TOOTHED ELECTROPLATED DIAMOND BLADES PYRAMID SAWS For heavy duty hand trimming and sawing on GRP mouldings and other applications. Allows side grinding as well as cutting. Diameters Grade 100, 110 & 15mm All saws are made with bore sizes to suit customers requirements which should be stated when ordering. Saws coated in grit are approximately 0.4mm wider than nominal width. PYRAMID BLADE BORE *BSEV153C *BSEV13E *BSEV183E PYRAMID BLADE 15 M14 FITTING FITTING M14 *BSEVF183 DIAMOND CUTTING & SIDE GRINDING BLADE Other sizes available, prices on request. Technical Speci cation: Page 38 OTHER RELATED PRODUCTS When ordering please state Code. *Denotes ex-stock HAND MACHINES - Pages

10 CONTINUOUS & SIDE SPOKED INTEGRAL SPINDLE SAWS INTEGRAL SPINDLE SAWS Used where it is necessary to cut close into a corner and where a boss or locking nut would get in the way. The blade and spindle are made in one piece and present an absolutely ush side to the work. Diameters Con guration 5-75mm Continuous Rim Side Spoke Can be supplied in a variety of diamond grades and widths. All saws are coated a nominal mm down the sides. Please state shank diameter and length when ordering. Saws coated in grit are approximately 0.4mm wider than nominal width. Other sizes available, prices on request. CONTINUOUS RIM WIDTH ESI505 ESI515 ESI55 ESI535 ESI545 44/0 *ESI510 *ESI50 *ESI530 ESI540 ESI550 WIDTH ESIS705 ESIS715 ESIS75 ESIS735 ESIS745 44/0 ESIS710 ESIS70 ESIS730 ESIS740 ESIS750 SIDE SPOKE Quantity Discounts 5 offless ½% 10 offless 5% 0 offless 7½% 50 offless 10% 100 offless 0% FEIN OSCILLATING BLADES CONTINUOUS RIMMED & PENDULUM OSCILLATING BLADES For use on Supercut machines enabling you to cut 90 appertures in Composites and clearing material in hard to reach areas of the workpiece. ELECTROPLATED BLADES Technical Speci cation: Page 38 OTHER RELATED PRODUCTS *ESC001 *ESC00 SE0 AIR MACHINE - Page 8 FEIN MULTITALENT MACHINE - Page 35 Other sizes available, prices on request. 78mm diameter Pendulum Saw

11 BANDSAW BLADES Diamond coated bandsaws are made from high quality steel with the leading edge coated with diamond giving a continuous ribbon of aggressive cutting action. Both straight cut and curves can be easily achieved, bearing in mind the tighter the curve required, the narrower width of bandsaw needed. Supplied ready welded to your exact required length or available in coils up to 39 metres long. Continuous Coated Castellated Edge (for thicker materials) Blade Widths 1, 19, 5mm BANDSAWS 1, 19 & 5mm Widths per metre per foot 44/0 0/85 85/ /10 150/170 00/40 Tension Gauge DIAMOND BANDSAW BLADES JIGSAW BLADES Diamond coated for free cutting with clean!nish. Available for a range of machines in medium 44/0 or coarse diamond. Grades coarse & 44/0 medium JIGSAW TYPE Lesto Pendle/Bosch Lesto Star Black and Decker RAC or Fein Rockwell Cengarette Makita *EJB00 EJB040 *EJB00 *EJB080 EJB100 *EJB10 EJB140 44/0 *EJB010 *EJB030 *EJB050 EJB070 EJB090 EJB110 EJB130 & 44/0 GRIT JIGSAW BLADES Technical Speci cation: Page 38 Note: Longer jigsaw blades available on request. OTHER RELATED PRODUCTS When ordering please state Code. *Denotes ex-stock PNEUMATIC JIGSAW MACHINE - Page 3 7

12 A wide selection of holesaws is available for both site and factory use when cutting holes in composites. SPECIAL HOLESAWS Type 1 - Automatic Side Ejection - provides a very rapid method of dry cutting holes in GRP mouldings and laminates. Type - Piloted with Spring Operated Core Ejection - for ease of location with core ejecting by means of a spring loaded plunger. HSS/Tungsten Carbide drill or plain pilot available. Type 3 - Spring Core Ejection without Pilot - designed for holesaws under 5mm diameter where limited internal space is available and will not accommodate a standard internal spring plunger ejector. A spring loaded centre is incorporated for location purposes, which ejects the core when the hole is nished. TYPE 1 Type 1 - Automatic Side Ejection - Piloted with Spring Operated Core Ejection 3 - Spring Core Ejection without Pilot Grade available, prices on request. Prices include Plain or HSS Pilot Drills. Prices are for cutting depths up to 19mm. Tungsten Carbide drills are available on request SPECIAL HOLESAWS - Grade 44/0 TYPE Other sizes available, prices on request. Technical Speci cation: Page 38 8 DIA. TYPE 1 1 EHS010A 1 EHS015A 19 EHS00A EHS05A 5 EHS030A 30 EHS035A 3 EHS040A 40 EHS045A 45 EHS050A 50 EHS055A 57 EHS00A 5 EHS05A 70 EHS070A 75 EHS075A 8 EHS080A 90 EHS085A 95 EHS090A 100 EHS095A 108 EHS100A 115 EHS105A 10 EHS110A 15 EHS115A 133 EHS10A 140 EHS15A 145 EHS130A 150 EHS135A TYPE EHS010S EHS015S EHS00S EHS05S EHS030S EHS035S EHS040S EHS045S EHS050S EHS055S EHS00S EHS05S EHS070S EHS075S EHS080S EHS085S EHS090S EHS095S EHS100S EHS105S EHS110S EHS115S EHS10S EHS15S EHS130S EHS135S TYPE 3 EHS010C EHS015C EHS00C EHS05C

13 STANDARD HOLESAWS DIA *EDH009 *EDH0058 *EDH101 *EDH0034 *EDH53 *EDH103 *EDH0078 *EDH105 *EDH0100 *EDH011 *EDH0118 *EDH013 *EDH0114 *EDH015 *EDH0138 *EDH017 *EDH011 *EDH019 *EDH0158 *EDH111 *EDH0134 *EDH113 *EDH0178 *EDH000 *EDH01 *EDH018 DIA *EDH014 *EDH05 *EDH038 *EDH01 *EDH09 *EDH058 *EDH034 *EDH078 *EDH0300 *EDH0318 *EDH0314 *EDH0338 *EDH031 *EDH0358 *EDH0334 *EDH0378 *EDH0400 *EDH0418 *EDH0414 *EDH0438 *EDH041 *EDH0434 *EDH0500 *EDH051 *EDH000 STANDARD HOLESAWS (Starrett type tting - Electroplated) A range of holesaws coated in diamond grit, that will rapidly cut through material leaving clean holes and giving long life. Diameters 14-15mm Holesaws furnished without arbors unless speci ed. Standard drilling depths; with pilot and ejector spring 15mm, without pilot and ejector spring 30mm, For customers requiring deeper drilling depth, quotations will be given on request. Other sizes available, prices on request. HOLESAWS ACCESSORIES ARBORS CHUCK SIZE HEX. HANK FITS SIZE HOLESAWS STANDARD GRIT DIAMOND HOLESAWS *MSA0A1 *MSA0A A1 ARBOR PILOT DRILL Tungsten Carbide Drill - Ø.5mm *MSAXA014C EJECTOR SPRING Ejects slug out of holesaw *MSA0A7 A ARBOR When ordering please state Code. *Denotes ex-stock Technical Speci cation: Page 38 9

14 METAL BOND DIAMOND CORE DRILLS Heavy duty metal bond diamond segmented or crowned Core Drills for wet cutting clean holes in GRP/FRP containing high levels of Silicon. All types of shank ttings and different tube lengths area available. 300mm OAL, 1¼ UNC METAL BOND SEGMENTED & CROWNED CORE DRILLS DIA. BMHP01 1 BMHP BMHP01 1 BMHP BMHP BMHP00 0 BMHP0 BMHP03 3 BMHP04 4 BMHP05 5 BMHP0 BMHP07 7 BMHP08 8 BMHP BMHP03 3 BMHP BMHP BMHP03 3 BMHP BMHP DIA. BMHP BMHP04 4 BMHP BMHP BMHP04 4 BMHP BMHP BMHP BMHP BMHP05 5 BMHP BMHP05 5 BMHP BMHP BMHP00 0 BMHP0 BMHP04 4 BMHP BMHP07 7 BMHP Other sizes available, prices on request. Technical Speci cation: Page 38 OTHER RELATED PRODUCTS WATER CHUCKS - Page 11 10

15 DIAGRIT WATER CHUCKS TYPE A - Heavy duty water chuck!ts most popular pillar drills clampamping directly onto the quill of the drilling machine enabling waterfeed through the centre of core drills. TYPE A TYPE B - Very popular Water Chuck!ts most popular pillar drills enabling waterfeed through the centre of core drills. BABY WATER CHUCK - A unique small water chuck is an easy answer to supplying water coolant to the working area when drillingg holes with a hand held pistol drill. Available with all types of shank!ttings. For use with standard holesaws. HEAVY DUTY WATER CHUCK - Please call for details on our Heavy avy Duty Water Chucks as we can design to your speci!cation. DIAGRIT WATER CHUCK - TYPE A *MMP004C Continental ½ BSP When ordering specify Morse taper size and quill diameter. eter. DIAGRIT WATER CHUCK - TYPE B *MMPC05C *MMPC05H Continental ½ BSP Habit TYPE B When ordering please specify Morse taper size. BABY WATER CHUCK *MMP008 Chuck complete with tap and pipe *MSAXA014C Extra carbide drills - ¼ diameter HEAVY DUTY When ordering please specify required shank. DIAGRIT HEAVY DUTY WATER CHUCK *MMP 1¼ UNC Fitting BABY WATER CHUCK OTHER RE RELATED PRODUCTS When ordering please state Code. *Denotes ex-stock MB CORE DR DRILLS - Page 10 11

16 TWIST DRILLS Diameters Grades 4-9.5mm & 44/0 Other sizes and grades are available on request. We also manufacture solid drills, details on request. TWIST DRILLS ELECTROPLATED DIAMOND TWIST DRILLS COUNTERBORES EMP5 EMP35 EMP45 EMP55 EMP5 EMP75 EMP85 EMP95 EMP305 EMP315 EMP35 44/0 EMP30 EMP40 EMP50 EMP0 *EMP70 *EMP80 *EMP90 EMP300 *EMP310 *EMP30 EMP330 COUNTERBORES Pilot Diameter Grades, 8, 10, mm & 44/0 Other sizes available, prices on request. When ordering please state; Diameter, Pilot, Shank Diameter. For holes up to mm diameter, these tools can be used in Series 50 or 0. Over mm diameter portable or!xed drilling machines can be used or static routing machines. Counterbores are not adjustable and must be ordered to cover both bore and recess, and can be manufactured to counterbore any size hole between 10mm and 50mm diameters. COUNTERBORES Technical Speci cation: Page 38 1 ECB310 ECB30 ECB330 ECB340 ECB350 ECB30 ECB370 ECB410 ECB40 ECB430 ECB440 ECB450 ECB40 ECB470 Other sizes available, prices on request. PRICE 44/0

17 COUNTERSINKS - TYPE C DRILL COUNTERSINKS Diameters Type A 4-1mm Type B 5.5-9mm Grades & 44/0 When ordering please state shank diameter. Other sizes and grades are available on request. Can be manufactured to your speci cation. TYPE A PILOT P ECKA3040 ECKA3045 ECKA3050 ECKA3055 ECKA300 ECKA3095 ECKA3100 ECKA3110 ECKA310 44/0 ECKA4040 ECKA4045 ECKA4050 ECKA4055 ECKA400 ECKA4095 ECKA4100 ECKA4110 ECKA410 TYPE C WITH PLAIN PILOT A ECKC3040 ECKC3045 ECKC3050 ECKC3055 ECKC300 ECKC3095 ECKC3100 ECKC3110 ECKC310 44/0 ECKC4040 ECKC4045 ECKC4050 ECKC4055 ECKC400 ECKC4095 ECKC4100 ECKC4110 ECKC410 TYPE D ANGLE 90º A BOLT SIZE M3 M5 M M8 M10 M1 ECKD305 ECKD3110 ECKD3130 ECKD3170 ECKD30 ECKD350 44/0 ECKD405 ECKD4110 ECKD4130 ECKD4170 ECKD40 ECKD450 Technical Speci cation: Page 38 13

18 A range of diamond routers is offered to encompass the majority of applications in the GRP/FRP Composites Industry. The high quality routers are available in various sizes and diamond grades. We can also manufacture these routers to your speci c requirements. DOME ENDED ROUTERS Designed for drilling, routing, rebating and trimming Glass Reinforced Plastic or similar materials. Developed to perform many different functions from trimming the unwanted section off breglass mouldings to routing deep rebates in laminates. Type DOME ENDED ROUTERS Standard (Figure 1) Coated to Shoulder (Figure ) Diameters Diamond Coating A diameter Shank D diameter 4,, 8mm, 8mm Diamond Coating Length B Grades 13, 19mm & 44/0 Diameter A 4mm are tapered. FIGURE 1 STANDARD FIGURE 1 DIAMOND COATING Dia. AA@ Length AB@ SHANK Dia. AD@ 8 8 *ERD10 *ERD30 *ERD50 ERD70 ERD90 ERD310 44/0 *ERD00 *ERD0 *ERD40 *ERD0 ERD80 ERD300 ERD30 FIGURE COATED TO SHOULDER FIGURE DIAMOND COATING Dia. AA@ Technical Speci cation: Page 38 OTHER RELATED PRODUCTS SE 50 ROUTER MACHINE - Page 9 14 Length AB@ SHANK Dia. AD@ ERD030 *ERD410 Other sizes available, prices on request. When ordering please state Code. *Denotes ex-stock 44/0 *ERD040 *ERD40

19 PARALLEL ROUTERS Designed for drilling, routing, rebating and trimming Glass Reinforced Plastic or similar materials. Developed to perform many different functions from trimming the unwanted section off breglass mouldings to routing deep rebates in laminates and other materials. Type Diameters Flat End Relieved End (Figure ) 4-5mm Diamond Coating Length B Grades 1.5, 19 & 5mm & 44/0 Standard grade of diamond 44/0 but where speed of cut is more important than nish use. Other grades and sizes available on request. When ordering please state Code and Size of Shank required. We will supply as Flat End type, unless otherwise requested. PARALLEL ROUTERS TYPE ERP DIAMOND COATING Dia. Length AA@ AB@ /0 ERP510 ERP50 ERP530 ERP540 *ERP550 *ERP50 ERP570 ERP580 ERP590 ERP00 ERP10 ERP0 ERP30 ERP40 ERP50 ERP0 ERP70 ERP80 ERP90 ERP700 ERP710 ERP70 ERP730 ERP740 *ERP505 ERP515 ERP55 ERP535 *ERP545 *ERP555 *ERP55 ERP575 ERP585 ERP595 ERP05 ERP15 ERP5 ERP35 ERP45 ERP55 ERP5 ERP75 ERP85 ERP95 ERP705 ERP715 ERP75 ERP735 ERP PARALLEL ROUTERS FIGURE Technical Speci cation: Page 38 OTHER RELATED PRODUCTS SE 50 ROUTER MACHINE - Page 9 Other sizes available, prices on request. 15

20 PIERCING ROUTERS Piercing routers or solid drills are usually used for drilling and routing Reinforced Plastic mouldings or laminate. Grade, 44/0 The standard grade is 44/0. Where speed of cut is more important than nish use. Shank D dia. mm. Other sizes and grades available on request. PIERCING ROUTERS PIERCING ROUTERS DIAMOND COATING Dia. A Length B ERDP3001 ERDP300 ERDP30801 ERDP3080 ERDP30803 ERDP /0 ERDP40401 ERDP4001 ERDP400 ERDP40801 ERDP4080 ERDP40803 ERDP40804 HI-DI ROUTER Our diamond coated routers have been developed over the years to perform many varied functions from trimming unwanted section off breglass mouldings to routing deep rebates in laminates of all kinds. The standard grade is 44/0. Where speed of cut is more important than nish use. Other sizes and grades available on request HI-DI ROUTER HI-DI ROUTER GRASSO ROUTER DIAMOND COATING Dia. Top mm Length mm A B SHANK Dia. mm D 44/0 *ERD135 GRASSO ROUTER Small diameter router for intricate work on Composite and similar materials. GRASSO ROUTER Technical Speci cation: Page 38 OTHER RELATED PRODUCTS SE 50 ROUTER MACHINE - Page 9 1 DIAMOND COATING Dia. Top mm Length mm A B SHANK Dia. mm D 3 44/0 *ERD003 Other sizes available, prices on request.

21 AMP are able to supply grinding tools to cover the majority of grinding applications in the Composite industry. ELECTROPLATED DIA-DRY DISCS Designed to provide a rapid continuous grinding of Reinforced Plastic and similar materials, with long life. Made for dry use but can be used wet. Recommended speed 8,000 to 1,000 rpm. Diameters 100, 180mm Grades, 44/0 & 0/ FITTING 1mm bore 1mm bore 1mm bore M14 M14.mm bore 44/0 0/85 44/0 *EMP110 *EMP115 EMP10 EMP11 EMP117 *EMP150 ELECTROPLATED DIAMOND DIA-DRY DISCS VACUUM BRAZED DIAMOND TITAN DRY GRIND DISCS TITAN DRY GRINDING DISCS Developed with vacuum brazed diamond for rapid stock removal. Diameters 115mm & 178mm Grade 40 Fits directly onto an angle grinder. TITAN DISCS FITTING.mm bore.mm bore *BMW075 *BMW085 Technical Speci cation: Page 38 OTHER RELATED PRODUCTS When ordering please state Code. *Denotes ex-stock AS100 ANGLE GRINDER MACHINE - Page 31 17

22 FLAT MACHINING SURFACE PLANERS SURFACE PLANERS Designed to be used in a heavy duty routing machine for machining at surfaces on Reinforced Plastic mouldings or blocks of laminate. The cutting edge is castellated to facilitate removal of swarf from the cutting face. Diameters Grades 40, 50, 5 & 75mm 30/3, & 44/0 Standard grade 44/0, for rapid stock removal or 30/3 for abrasive materials. SURFACE PLANERS ESP005 ESP015 ESP05 ESP035 44/0 ESP010 ESP00 ESP030 ESP040 VORTEX CUTTERS The ideal tool for opening up, elongating and machining oval holes. Diameters Grades 5, 50 & 75mm & 44/0 Alternative sizes can be manufactured in both parallel or tapered types. VORTEX CUTTERS PARALLEL TYPE VORTEX CUTTER Technical cal Speci cation: Page EMP050 EMP040 EMP045 EMP05 SIZE 5mm x 3mm 50mm x 3mm 50mm x 3mm 75mm x 3mm 44/0 44/0 Other sizes available, prices on request.

23 NEEDLE FILES A full range of quality diamond coated needle!les is available in the most popular shapes and grits,!ne, medium and coarse. ELECTROPLATED DIAMOND FILES TYPE TAPERED ENF010 ENF00 TF1 ENF030 *ENF040 TF ENF050 ENF00 ENF070 TF3 *ENF080 ENF090 ENF100 TF4 ENF110 ENF10 ENF130 TF5 ENF140 ENF150 ENF10 TF *ENF170 ENF180 ENF190 TF7 *ENF00 ENF10 ENF50 TF9 ENF0 ENF70 PARALLEL ENF80 PF10 ENF90 ENF300 ENF310 PF11 ENF30 ENF330 ENF340 PF1 ENF350 ENF30 Handle GRIT SIZE 85/100 10/150 00/40 85/100 10/150 00/40 85/100 10/150 00/40 85/100 10/150 00/40 85/100 10/150 00/40 85/100 10/150 00/40 85/100 10/150 00/40 85/100 10/150 00/40 Taper Flat 85/100 10/150 00/40 85/100 10/150 00/40 85/100 10/150 00/40 Oval 3 Square Knife Edge Square Round Barette Half Round ELECTROPLATED DIAMOND NEEDLE FILES Hand Slitting Crossing 1. When ordering please state code and grit size required. When ordering please state Code. *Denotes ex-stock 19

24 ELECTROFLEX HAND FILES HAND FILES General purpose!les supplied in sets of 4 different pro!les. Size Metal Grades 155mm Overall length. M10 - M800 grit ELECTROFLEX FILES *BEP840 *BEP845 *BEP850 *BEP855 SET OF 4 Black M10 Red M00 Yellow M400 White M800 NARROW DIAMOND BELTS Designed for dry grinding and deburring reinforced plastic and similar materials. NARROW BELTS FOR GRINDING & DEBURRING Length Width Metal Grades Other sizes available on request mm 8-13 mm grit ELECTROFLEX BELTS 305 x 13 mm Wide BEPN95A BEPN95C BEPN95D BEPN95E M0 M10 M00 M400 ELECTROFLEX BELTS 10 x 13 mm Wide OTHER RELATED PRODUCTS BEPN795A BEPN795C BEPN795D BEPN795E AIR BELT POLISHERS - Page 34 0 M0 M10 M00 M400

25 CUSHIONED FLEXIBLE HAND PADS Ideal for smoothing the edge of Reinforced Plastic moulding. Shaped foamed backing for comfortable grip. Colour coded foam backing for easy grade identi!cation. Size Metal Grades 90 x 55 mm & 100 x 55 mm Electro"ex M0 - M1800 grit ELECTROFLEX HAND PADS 90 x 55mm *BEPN0 *BEPN1 *BEPN17 *BEPN Green M0 Black M10 Red M00 Yellow M400 ELECTROFLEX HAND PADS 100 x 55mm *BEPN00 *BEPN10 *BEPN15 *BEPN0 Green M0 Black M10 Red M00 Yellow M400 ELECTRFLEX CUSHIONED HAND PADS DIA-MET HAND PADS A rigid hand pad with aggressive stock removal for hand grinding reinforced plastic and similar materials. Size 95 x 55mm Grades Green M0, Black M10, Red M00 DIA-MET HAND PADS 95 x 55mm *BHP005 *BHP010 *BHP015 Green M0 Black M10 Red M00 DIA-MET RIGID HAND PADS When ordering please state Code. *Denotes ex-stock 1

26 QRS FEIN PADS ELECTROFLEX PADS Flexible pads are used for removing sharp edges, arrising and bevelling. They have a quick release backing (QRS) for rapid change of pad. Available in various sizes with or without water holes. Metal Grades Electro!ex grit Other sizes and grades available on request. FEIN TRIANGLE ELECTROFLEX QRS OTHER RELATED PRODUCTS FEIN MULTITALENT MACHINE - Page 35 FEIN BACKUP PADS - Page 35 *BEPN890A *BEPN890C *BEPN890D *BEPN890E M0 M10 M00 M400 ELECTROFLEX DRUMS M14 Drums with central waterfeed for wet polishing. Diameters Metal Grades 50 & 75 mm Electro!ex grit Ø50 x 4mm Wide M14 FITTING ELECTROFLEX DRUMS *BEPN493N *BEPN495N *BEPN500N *BEPN505N M0 M10 M00 M400 Ø75 x 50mm Wide QRS BACKING ELECTROFLEX POLISHING DISCS *BEPN50A *BEPN50C *BEPN50D *BEPN50E M0 M10 M00 M400 QRS BACKING DISCS (VELCRO ) Quick release discs for grinding Reinforced Plastic and similar materials. Colour coded for easy grade identi"cation. ELECTROFLEX DIAMOND DISCS OTHER RELATED PRODUCTS Q-R PNEUMATIC MACHINE - Page 33 Technical Speci cation: Page 38 *BEPN09A *BEPN09C *BEPN09D *BEPN09E *MMP070 M0 M10 M00 M400 QRS Backup Pad Ø100mm Ø100mm x 10mm Bore

27 Ø100mm M14 BACKED DISCS ELECTROFLEX DISCS *BEPN080 *BEPN090 *BEPN095 *BEPN100 M0 M10 M00 M400 D-LOC DISCS M14 FITTING BACKED DISCS Quick release discs for grinding Composites. Colour coded for easy grade identi!cation. Diameter Metal Grades OTHER RELATED PRODUCTS Q-R PNEUMATIC MACHINE - Page 33 5, 50 & 75 mm Electro"ex grit Electroplus grit D-LOC DISCS Ø5mm *BEP900A *BEP900C *BEP900D *BEP900E M0 M10 M00 M400 D-LOC DISCS Ø50mm *BEP910A *BEP910C *BEP910D *BEP910E M0 M10 M00 M400 D-LOC DISCS Ø75mm *BEP915A *BEP915C *BEP915D *BEP915E M0 M10 M00 M400 D-LOC MANDRELS Quick release backup pads and shaft for D-Loc Discs. BACKUP PAD *BES900 *BES910 *BES915 D-LOC DISCS & MANDRELS Ø5mm Ø50mm Ø75mm When ordering please state Code. *Denotes ex-stock Technical Speci cation: Page 38 3

28 SPECIAL TOOLS We are specialists in designing and manufacturing special tools for many applications. For example, we are renowned for a large range of calibration wheels, drills, saws, routers, holesaws etc. speci cally for the GRP/FRP Pipe Industry and also for the Wind Turbine Industry. GRP/GRE PIPE SECTION 4

29 GRP/GRE PIPES A range of standard tools as well as bespoke tooling for individual requirements can be manufactured. These tools can be used for both Continuous/Discontinuous Filament Wound Pipe and Centrifugal Cast Pipe. We also hold a large stock for immediate despatch of Reka Coupling, Locking Bell and Spigot Joint tooling, Online and Of ine Calibration Drums and Threading wheels. DIAMOND SAWS *ESG01M *ESG0M *ESG03M *ESG04M *ESG0M *ESG3573 *ESG05M *ESG490 *ESG705 *ESG705X SIZE Ø00 x 4. x Ø7 bore Ø10 x 4. x Ø7 bore Ø15 x 4. x Ø7 bore Ø5 x 4. x Ø7 bore Ø30 x 4. x Ø7 bore Ø35 x 4. x Ø7 bore Ø50 x 4. x Ø7 bore Ø300 x 3. x Ø40 bore Ø400 x 3. x Ø50 bore Ø400 x 3. x Ø40 bore CALIBRATION DRUMS SIZE *EMW3845 Ø50 x 15 x 45 *EMW0000 Ø50 x 15 x 45 CALIBRATION DRUM & CHAMFERING RING COATING 0% 100% CHAMFER RING *EMW3844 SIZE Ø3 x 31 x 19 *EMW00001 Ø3 x 31 x 19 COATING 0% 100% 5

30 REKA 150 Stop *EMW04 *EMW099 Groove Chamfer *EMW040 Saw *ESG043 SIZE Ø Ø Ø Ø QTY 1 1 SIZE Ø Ø Ø Ø QTY 1 1 SIZE Ø <00mm Ø <00mm Ø <00mm Ø <00mm Ø <00mm Ø <00mm QTY SIZE Ø >00mm Ø >00mm Ø >00mm Ø >00mm Ø >00mm Ø >00mm QTY SIZE VLDP VLDP VLDP VLDP VLDP VLDP VLDP QTY REKA 175 CHAMFER WHEEL Stop *EMW04 Groove *EMW041 Chamfer *EMW040 Saw *ESG055 REKA 70 GROOVE WHEEL Stop *EMW011 Groove *EMW1159 Chamfer *EMW0110 Saw *ESG01M Saw *ESG0M Saw *ESG03M REKA 330 STOP WHEEL Stop *EMW011 Groove *EMW1158 Chamfer *EMW0110 Saw *ESG03M Saw *ESG04M Saw *ESG05M REKA 35 DIAMOND SAW Stop *EMW011 Groove *EMW73 Chamfer *EMW0110 Saw *ESG04M Saw *ESG0M Saw *ESG3573M Saw *ESG05M

31 WIND TURBINE INDUSTRY AMP can offer diamond tooling manufactured by one of the world s leading manufacturers of diamond tooling for the production of Wind Turbine parts, including a range of holesaws up to 950mm in diameter, surface planers and large diameter saws of up to 700mm for blade root trimming. All of these tools are available in various diamond grades to suit your speci c application. Also offered is a Design - Manufacture - Supply service for all of your special tools. Please contact our Technical Sales Engineers to discuss your requirements. Additionaly to the above we can also offer a strip, replate and retipping service for your used electroplated and metal bond tools. This could save you up to 40% on your tooling costs. SURFACE PLANER LARGE BLADE HOLESAW 7

32 AIR POWERED MACHINES SE0 TRIMMING MACHINE This robust lightweight powerful hand machine has been developed for rebating and sawing materials up to 1mm thick. The design of the machine allows it to be easily adapted for jig following and can also be bench or pedestal mounted. The machine is supplied with a safety guard and includes a safety lever throttle. For ROUTING or 8mm routers can be used and when used with a collet nut adaptor the machine will drive a 5mm diameter saw. For TRIMMING trimming can be carried out by using a mm router but the SE50 is more suited for this purpose. SE0 TRIMMING MACHINE - FIGURE 1 MGFSE0 SE0 Air Powered Trimming Machine Handle FIGURE 1 SE0 TRIMMING MACHINE OPTIONAL ATTACHMENTS JIG TRIMMING GUIDE AND GAUGE When used with a 50mm diameter side spoke saw this unit allows for precision trimming to be carried out by following a jig with the roller guides and adjusting width of cut as required. SAW ACCESSORIES - FIGURE FIGURE JIG TRIMMING GUIDE & GAUGE FOR Ø50mm SAW *MMPA01 Collet Nut Saw Adaptor.35mm *MMPA0 Collet Not Saw Adaptor 19mm *MMP00 Ømm Spindle Saw Arbor.35mm location *MMP05 Ømm Spindle Saw Arbor mm location *MMP03 Ø8mm Spindle Saw Arbor *ESC050A Ø50mm x Circular Saw 44/0 *ESS540A Ø50mm x Side Spoke Saw 44/0 *MMPSE49Jig Trimming Guide & Gauge for Ø50mm Saw *MMPC01 Saw Guard and Cowl for 5mm Diameter Saw REBATING ATTACHMENT AND GAUGE When used with a standard 19 x 35mm rebating router the adjustable guide allows a large range of rebates to be machined quickly and economically. ROUTER ACCESSORIES - FIGURE 3 FIGURE 3 - REBATING ATTACHMENT WITH DUST EXTRACTION COWL FOR REBATING ROUTERS Technical Speci cation: Page 39 8 *ERD0 mm Dome Ended Router 44/0 *ERD0 8mm Dome Ended Router 44/0 *MMP57 Plain Nose Cowl *MMP1007 Nose Cowl with Dust Extraction Pipe *MMPSE43 Rebating Attachment with Dust Extraction Cowl *ERT05 Rebating Router 44/0 *ERT015 Rebating Router

33 SE50 ROUTING MACHINE The high speed air powered machine has been designed principally to be used in conjunction with our diamond coated saws and routers for trimming Reinforced Plastic mouldings up to 3mm thick using saws up to 40mm diameter, either freehand or following a jig. The machine incorporates an auxiliary sleeve which can be easily removed for rapid change of tooling and will accept routers up to mm diameter. The machine is supplied with a plain nose cowl and includes a safety lever throttle. The SE50 has a side exhaust. The supplied plain nose cowl which can be used as a jig guide also protects both collet and router shank from abrasion. SE50 MACHINE *MGFSE50 SE50 Side Exhaust Routing Machine *MMPH01 Handle ROUTER ACCESSORIES *ERD040 *ERD0 *MMP70 *MMP73 4.8mm Dome Ended Router 44/0 mm Dome Ended Router 44/0 Plain Nose Cowl [included] Nose Cowl with Dust Extraction Pipe SE50 ROUTING MACHINE SAW ACCESSORIES *ESC030A *ESS530A MMPA05 MMP05 MMPC05 40mm Diameter x Circular Saw 44/0 40mm Diameter x Side Spoke Saw 44/0 Collet Nut Saw Adaptor Spindle Saw Arbor mm diameter Saw Guard and Dust Extraction Cowl When ordering please state Code. *Denotes ex-stock Technical Speci cation: Page 39 9

34 AIR POWERED MACHINES AS70 ANGLE SAW The AS70 is a very powerful lightweight machine tted with an open saw guard and ef cient dust extraction. The narrow head on the AS70 enables machining to be carried out in tight corners up to 1mm thick. Spent air is exhausted through the handle preventing the material being contaminated by airborne particles. Supplied with safety lever throttle. Recommended Saw Side Spoke 44/0 grit 70mm x mm x 1mm AS70 ANGLE SAW *BPMAS70 AS70 Angle Saw complete with hose, oil etc SAW ACCESSORIES *ESS553 AS70 ANGLE SAW Ø70mm x Side Spoke Saw 44/0 AS100 ANGLE SAW The AS100 is a very powerful robust machine developing 1.5 HP. Fast cutting, with very effective dust extraction, of Reinforced Plastic up to 5mm thick using a 100mm diameter side spoke saw. Supplied with a combined saw guard and dust extraction cowl and safety lever throttle. Recommended Saws Side Spoke 44/0 grit 100mm x mm x mm Continuous Rim 44/0 grit 100mm x mm x AS100 ANGLE SAW *BPMAS100 AS100 Angle Saw Machine SAW ACCESSORIES AS100 ANGLE SAW *ESS570 *ESC140 Ø100mm x Side Spoke Saw 44/0 Ø100mm x Continuous Rim 44/0 Technical Speci cation: Page 39 30

35 AS15 ANGLE SAW The AS15 has the same power and speci catons as the AS100. It has been designed to accept larger diameter saws for applications requiring a greater depth of cut. Will cut laminate up to 5mm thick or corrugated sheeting up to 40mm. Supplied as standard with safety lever throttle. Recommended Saws Side Spoke 44/0 grit 15mm x mm x mm Optional attachment Sole Plate with adjustable depth gauge. AS15 ANGLE SAW *BPMAS15 AS15 Angle Saw Machine AS15 ANGLE SAW OPTIONAL ATTACHMENTS SOLE PLATE WITH ADJUSTABLE DEPTH GAUGE A sole plate with adjustable depth gauge is available providing precise cutting depth of up to 35mm. SAW ACCESSORIES *ESS590C Ø15mm x Side Spoke Saw 44/0 *ESC170C Ø15mm x Continuous Rim Saw 44/0 OPTIONAL ATTACHMENT *MMPSP01 Adjustable Sole Plate and Handle AS100 ANGLE GRINDER AS100 ANGLE GRINDER Very powerful, heavy duty machine developing 1.5HP. Used for rapid grinding of Reinforced Plastic with a 100mm diameter Dia-Dry disc. The machine is supplied with a combined guard and dust extraction cowl and with safety lever throttle. Recommended Disc Ø100mm Dia-Dry & 44/0 AS100 ANGLE GRINDER *BPMAG100 AS100 Angle Grinder DISC ACCESSORIES *EMP110 *EMP115 Dia-Dry Disc Dia-Dry Disc 44/0 When ordering please state Code. *Denotes ex-stock Technical Speci cation: Page 39 31

36 AIR POWERED MACHINES BOSCH PNEUMATIC JIGSAW MACHINE A high quality professional pneumatic jigsaw, with the Bosch developed precision control system that virtually eliminates blade wander.!tool Free Blade Replacement - for fast & easy change.!exclusive Blade Clamp Mechanism - for superior hold.!low Vibration Design - ensures smooth operation.!four Stage Orbital Action - adjusts blade motion.!paddle Style On/Off Switch.!Low Position Roller Guide - ensures blade stability & precise cutting.!rotating Handle - provides comfort when cutting intricate workpiece.!adjustable Steel Footplate - retracts & tilts left & right up to 45º in both directions. PNEUMATIC JIGSAW AIR POWER JIGSAW *BPMHP00 Pneumatic with Precision Control Technical Speci cation: Page 39 OTHER RELATED PRODUCTS Electroplated Jigsaw Blades - Page 7 3

37 QUICK Q-R PNEUMATIC WET POLISHER Variable speed grinder with central water feed and rear exhaust. M14 tting. VARIABLE SPEED POLISHER *BPMQR Q-R Rear Exhaust Polisher ELECTROFLEX DISC ELECTROFLEX QRS BACKING DISCS Ø100mm x 10mm Bore *BEPN09A *BEPN09C *BEPN09D *BEPN09E *MMP070 M0 M10 M00 M400 QRS Backup Pad Ø100mm BACKED ELECTROFLEX DISCS M14 FITTING *BEPN080 *BEPN090 *BEPN095 *BEPN100 Ø100mm QUICK Q-R WET POLISHER M0 M10 M00 M400 ELECTROFLEX DRUMS Ø50 x 4mm Wide M14 FITTING *BEPN493N *BEPN495N *BEPN500N *BEPN505N M0 M10 M00 M400 Ø75 x 50mm Wide M14 FITTING *BEPN50A *BEPN50C *BEPN50D *BEPN50E M0 M10 M00 M400 DISC ACCESSORIES QRS FLAT TYPE WITH M14 FITTING QRS BACKUP PADS *MMP070 *MMP070C Ø100mm Flat Type with M14 tting Ø100mm Cushion Type with M14 tting Technical Speci cation: Page 39 FURTHER ACCESSORIES INFORMATION Drums - Page 100mm Flexible Discs - Page QRS Flat Type Backup Pad - Page M14 Backed Discs - Page 3 When ordering please state Code. *Denotes ex-stock 33

38 MODEL AIR POWERED MACHINES AIR BELT POLISHERS Diamond belt machine with Locklever for grinding, deburring and polishing dif!cult to reach areas. With 7º offset and rear exhaust. NARROW BELT MACHINES BPMDY005 BPMDY010 MODEL BELT SIZE 8-13 x 305mm 8-13 x 10mm ELECTROFLEX BELT ACCESSORIES 305 x 13 mm Wide NARROW DIAMOND BELTS BEPN95A BEPN95C BEPN95D BEPN95E M0 M10 M00 M x 13 mm Wide NARROW DIAMOND BELTS MODEL BEPN795A BEPN795C BEPN795D BEPN795E Technical Speci cation: Page 39 FURTHER ACCESSORIES INFORMATION Electro ex Narrow Belts - Page 0 34 M0 M10 M00 M400

39 ELECTRIC MACHINE FEIN OSCILLATING MACHINE FEIN MULTITALENT OSCILLATING The Fein Multitalent basic ocillating 110 volt machine is used for dry polishing. OSCILLATING POLISHER 110V MODEL *BEMFMM DRY SPEED Variable 11,000-0,000 FEIN PAD ACCESSORIES TRIANGLE QRS ELECTROFLEX *BEPN890A M0 *BEPN890C M10 *BEPN890D M00 *BEPN890E M400 FEIN BACKUP PADS Box of FEIN BACKUP PAD *BEMF001 QRS backing pad FEIN BLADE ACCESSORIES OSCILLATING ELECTROPLATED BLADES *ESC001 *ESC00 78mm diameter Pendulum Saw OSCILLATING BLADES Technical Speci cation: Page 39 FURTHER ACCESSORIES INFORMATION When ordering please state Code. *Denotes ex-stock FEIN TRIANGULAR PADS - Page FEIN OSCILLATING BLADES - Page 35

40 AIR PREPARATION MINI FILTER/ REGULATOR AND LUBRICATOR OIL MIST LUBRICATOR Air preparation mini!lter/regulator and lubricator which!lters air and water. The lubricator oil can be replenished without stopping the air line and oil delivery in a perfect mist, ensuring good lubrication to the working parts of the air power tool for maximum ef!ciency and long life. The semi-automatic drain!lter bowl with high quality polycarbonate bowl is designed for long service life. For use with AIR MACHINES *BMP03 *MMPL10 55 cu. ft./min 150 litre/min Hydrasil 10 Lubrication Oil ½L Mini Technical Speci cation: Page 39 OTHER RELATED PRODUCTS Air Machines - Pages 5-3 PLASTIC WEDGES Plastic wedges are used for separating Reinforced Plastic lay ups from the mould. These wedges are manufactured to provide an ideal and professional method for demoulding the!nished lay up without causing damage to the Gel Coat. Sizes Rigid Flexible 175mm x 75mm 130mm x 55mm 100mm x 38mm 15mm x 38mm Yellow - used for "at moulds Black - used for curved moulds PLASTIC WEDGES PLASTIC SEPARATING WEDGES *STP048 *STP050 *STP055 *STP053 *STP058 *STP00 *STP05 *STP03 Yellow Rigid 100mm x 38mm x 13mm Yellow Rigid 130mm x 55mm x 13mm Yellow Rigid 175mm x 75mm x 19mm Yellow Rigid 15mm x 38mm x 3mm Black Flexible 100mm x 38mm x 13mm Black Flexible 130mm x 55mm x 13mm Black Flexible 175mm x 75mm x 19mm Black Flexible 15mm x 38mm x 3mm When ordering please state Code. *Denotes ex-stock 3

41 STRIP, RE-PLATE & RE-TIP SERVICE A strip and replate service for your used electroplated tools, this could save you up to 40% on your tooling costs. Please ask for a quotation. STRIP & REPLATE SERVICE AVAILABLE FOR: Continuous Rim Blades Flute Wheels Pro!le Wheels Parallel Routers Various Electroplated CNC Tooling RE-TIP SERVICE AVAILABLE FOR : Multicut Core Drills Milling Wheels Routers (Metal Bond) Drums BEFORE AFTER 37

42 SAW BLADES - PAGES -5 DIAMOND COUNTERSINKS - PAGE 13 SURFACE SPEED 1,500-3,000 m/min 5-50 m/sec SPINDLE SAWS - PAGE RPM 4mm, mm 1,500 ELECTROPLATED ROUTERS - PAGES 14-1 SURFACE SPEED SURFACE SPEED SPEED RANGE mm 8-1 m/sec 5,500-50,000 rpm 8mm 8-1 m/sec 0,000-50,000 rpm STROKES 10mm 8-1 m/sec 15,300-30,000 rpm 11,000-18,500 / min 1mm 8-1 m/sec 1,700-5,000 rpm 1mm 8-1 m/sec 8,550-19,100 rpm 19mm 8-1 m/sec ,100 rpm 5mm 8-1 m/sec, rpm 1,500-3,000 m/min 5-50 m/sec OSCILLATING BLADES - PAGE BANDSAW BLADES - PAGE 7 TENSION MOS 1,050-1,400 kg/cm² 1,400 m/min - 1,800 m/min DIA DRY DISCS - PAGE 17 JIGSAW BLADES - PAGE 7 RPM STROKES 100mm 1,000 1,900 -,400 / min 180mm 8,500 ELECTROPLATED HOLESAWS - PAGES 8-9 TITAN DISCS - PAGE 17 RPM 14-0mm, mm 1,000-38mm, mm 8, mm 1, mm 1, mm 500 SURFACE PLANERS - PAGE 18 METAL BOND CORE DRILLS - PAGE 10 RPM 1-0mm 3,300 -, mm 1,740-1, mm 1, mm RPM SURFACE SPEED SPEED RANGE 30mm 5-31 m/sec 1,550-0,000 rpm 40mm 5-4 m/sec 1,000-0,000 rpm 50mm 5-5 m/sec 10,000-0,000 rpm 5mm 5-50 m/sec 7,350-14,700 rpm 75mm 0-50 m/sec 5,000-1,730 rpm VORTEX CUTTERS - PAGE 18 DIAMOND TWIST DRILLS - PAGE 1 RPM 4mm, mm 1,500 SURFACE SPEED SPEED RANGE 5mm 8-31 m/sec,000-3,700 rpm 50mm 1-31 m/sec,000-1,000 rpm 75mm 1-39 m/sec 4,000-10,000 rpm ELECTROFLEX DRUMS - PAGE DIAMOND COUNTERBORES - PAGE 1 RPM 4mm, mm 1,500 POLISHING MOS Wet 3,00 rpm FLEXIBLE DISCS & PADS - PAGES -3 Refer to machine manufacturers recommendations for speeds. 38

43 SE0 TRIMMING MACHINE - PAGE 8 AS15 ANGLE SAW - PAGE 31 COLLET MAX. HOSE MAX. SAW WEIGHT MIN. HOSE MAX. SAW WEIGHT mm or 8 internal/dia. mm 10 mm 75 kg 0.91 internal/dia. mm 10 mm 15 kg.5 FREE SPEED AIR PRESSURE AIR CONSUMPTION FREE SPEED AIR PRESSURE AIR CONSUMPTION rpm 0,000 kg/sq cm -7 litre/min 45 rpm 1,700 kg/sq cm -7 litre/min 55 SE50 ROUTING MACHINE - PAGE 9 AS100 ANGLE GRINDER - PAGE 31 COLLET MAX. HOSE MAX. SAW WEIGHT MIN. HOSE MAX. SAW WEIGHT mm internal/dia. mm mm 50 kg 1.14 internal/dia. mm 10 mm 100 kg 8 FREE SPEED AIR PRESSURE AIR CONSUMPTION FREE SPEED AIR PRESSURE AIR CONSUMPTION rpm 7,000 kg/sq cm -7 litre/min 340 rpm 1,700 kg/sq cm -7 litre/min 55 AS70 ANGLE SAW - PAGE 30 BOSCH PNEUMATIC JIGSAW - PAGE 3 MIN. HOSE MAX. SAW WEIGHT internal/dia. mm 10 mm 70 kg 0.9 FREE SPEED AIR PRESSURE AIR CONSUMPTION rpm 1,000 kg/sq cm -7 litre/min 53 WEIGHT 1.8 kg MIN. HOSE MAX. SAW WEIGHT internal/dia. mm 10 mm 100 kg 8 FREE SPEED AIR PRESSURE AIR CONSUMPTION rpm 1,700 kg/sq cm -7 litre/min 55 WEIGHT For further technical information, please contact AMP-Teknik A/S. 3,000 spm 30 FREE RUNNING SPEED AIR PRESSURE rpm psi 1. kg AIR BELT POLISHERS - PAGE kg 1.4 kg AIR FLOW MOTOR SCFM (LPM) hp 0 (55) 31 (878).4.5 SPEED 5,000 rpm max. 0,000 rpm max. FEIN MULTITALENT OSCILLATING - PAGE 35 WEIGHT The Technical Speci!cation information is for guidance only, assuming your machine/tools are in serviceable condition and have been maintained to the manufacturer s speci!cation. AIR CONSUMPTION Q-R PNEUMATIC WET POLISHER - PAGE 33 WEIGHT MODEL AS100 ANGLE SAW - PAGE 30 FREE RUNNING SPEED 1.9 kg SPEED VOLTAGE Variable 11,000-0, OIL MIST LUBRICATOR - PAGE 3 Compact size up to 150 litres/minute 55 cfm air "ow ¼ BSP!ttings. Operating pressure range kgf/cm² PSI. Effective water and particle removal 5µm!lter elements. Operating temperature range 10º-0º (14-140F). Recommended oil type ISO-VG3 the 4- drops per minute is adjusted by screwdriver to prevent unintentional oil volume adjustment. 39

44