BANDS ROLLS SAW BLADES BELTS SHEETS DISCS STARS STRIPS FLAPS WHEELS FILES
|
|
- Charity Smith
- 5 years ago
- Views:
Transcription
1 BANDS Coated Abrasive Bands Non-Woven Nylon Bands BELTS Coated Abrasive Belts Cloth Polishing Belts Non-Woven Nylon Belts DISCS Clean n Strip Discs Coated Abrasive Discs Non-Woven Nylon Discs NewEdge Scalloped-Edge Abrasive Discs Scotch-Brite Bristle Discs FLAPS Dynascaler Flaps, Hub FILES Reciprocating Files ROLLS Coated Abrasive Rolls SAW BLADES Bi-Metal Reciprocating Saw Blades SHEETS Coated Abrasive Sheets DynaMitt Sheets Non-Woven Nylon Sheets STARS Coated Abrasive Sanding Stars STRIPS Coated Abrasive Strips WHEELS Green Corps Cut-Off Wheels Coated Abrasive Flap Wheels Depressed Center Wheels Diamond Cut-Off Wheels Non-Woven Nylon Wheels...218
2 Coated Abrasive Belts For Use With Portable Belt Tools The Choice is Yours! ABRASIVES AND FILES 209 Dynabrade offers abrasive belts in three varieties to fit the preference & budget of every operator 577F Premium grade belts. The 577F Cubicut Polycut is a premium grade of zirconia alumina from. The selfsharpening characteristic of the microcrystalline structure is combined with heavy strength polyester cloth making these belts superior. We recommend these belts for optimum performance on our tools. DC Dynacut These zirconia alumina abrasive belts cut faster and last longer than most coated abrasive products when grinding steel or stainless steel with Dynabrade small belt tools. The belts are very sharp and are excellent for use on most metals, including aluminum and titanium, when lubricated properly (use Dynūba 100 spray lubricant; part number 60000). Aluminum Oxide Abrasive belts constructed of the most popular man-made abrasive: aluminum oxide. Aluminum oxide is tough and known for its high speed penetration of materials such as carbon steel, alloy steel, tough bronze and hard wood without excessive fracturing of the grain. Excellent all-around abrasive belts for everyday use. Coated Abrasive Belts Length For Use With These Dynabrade Tools Width 40 Grit 60 Grit 80 Grit 120 Grit 180 Grit 220 Grit 320 Grit 7-1/ (191 mm) 9-3/ (248 mm) 10-11/16" (271 mm) 2-1/ Dia. Pneumatic Wheels Diameter Pneumatic Wheels 3-1/ Dia. Pneumatic Wheels 2-1/ (57 mm) 7" (178 mm) DC DC (305 mm) Mini-Dynafile II 1/8" (3 mm) 1/ 1/ DC DC DC
3 210 ABRASIVES AND FILES Coated Abrasive Belts (Cont d) For Use With Portable Belt Tools 577F DC Dynacut Aluminum Oxide Length For Use With These Dynabrade Tools Width 40 Grit 60 Grit 80 Grit 120 Grit 180 Grit 220 Grit 320 Grit 15-1/ (394 mm) 18" (457 mm) 20-1/ (521 mm) 2 (610 mm) 5" Diameter Pneumatic Wheels Dynafile II Electric Dynafile II Dynafile III Dynangle Dynafile II Dynafile 1-1/ 2-3/ (70 mm) 3-1/ (89 mm) 7" (178 mm) 1/8" (3 mm) 1/ 1/ 3/ 3/ 1/8" (3 mm) 1/ 1/ DC DC DC DC DC DC DC DC DC DC DC DC DC
4 ABRASIVES AND FILES 211 Coated Abrasive Belts (Cont d) For Use With Portable Belt Tools 577F DC Dynacut Aluminum Oxide Length For Use With These Dynabrade Tools Width 40 Grit 60 Grit 80 Grit 120 Grit 180 Grit 220 Grit 320 Grit 2 Cont d (610 mm) 26-5/16" (610 mm) 30" (762 mm) 3 (610 mm) 4 (864 mm) 7 (183 cm) 8-1/ Dia. x 9" Long Pneumatic Wheels Dynabelter Dynangle II Dynafile utilizing Contact Arm Versatility Grinders Dynafile III Take-About Sander 9" (229 mm) 1/ 1/ 1/ 1/ 3/ 1/ 1/ 1/ DC DC DC DC DC DC DC DC DC DC
5 212 ABRASIVES AND FILES Coated Abrasive Belts (Cont d) For Use With Portable Belt Tools Length For Use With These Dynabrade Tools Width 40 Grit 50 Grit 60 Grit 80 Grit 120 Grit 180 Grit 220 Grit 7 Cont d (183 cm) 78" (198 cm) 10 (264 cm) Versatility Grinders Band Saw Blade Grinders Versatility Grinders 1-1/ 1-1/ DC DC 577F DC Dynacut Scalloped Abrasive Belts 777F 120 Length For Use With These Dynabrade Tools Width Grit 2 (610 mm) Dynafile III 1/ Non-Woven Nylon Belts For Use With Portable Belt Tools Scotch-Brite Surface Conditioning Belts Dynabrade Non-Woven Nylon SE Coarse Coarse Medium Very Fine Super Fine Type T Polish. Length For Use With These Dynabrade Tools Width Brown Maroon Blue Grey White 7-3/8" (187 mm) 2-1/ Dia. Pneumatic Wheels /8" (244 mm) 10-11/16" (271 mm) 1 (309 mm) Diameter Pneumatic Wheels 3-1/ Dia. Pneumatic Wheels Mini-Dynafile II 2-1/ (57 mm) 7" (178 mm) 1/
6 ABRASIVES AND FILES 213 Non-Woven Nylon Belts (Cont d) For Use With Portable Belt Tools Scotch-Brite Surface Conditioning Belts Dynabrade Non-Woven Nylon SE Coarse Coarse Medium Very Fine Super Fine Type T Polish. Length For Use With These Dynabrade Tools Width Brown Maroon Blue Grey White 15-1/ (394 mm) 18" (457 mm) 2 (610 mm) 5" Diameter Pneumatic Wheels Dynafile II, Electric Dynafile II, Dynafile III, Dynangle Dynafile 2-3/ (70 mm) 3-1/ (89 mm) 1/ 1/ 3/ 1/ 1/ " (762 mm) Dynabelter 1/ (864 mm) 7 (183 cm) Dynangle II Versatility Grinders 1/ 1/ Cloth Polishing Belts For Use With Portable Belt Tools Part Length For Use With These Dynabrade Tools Width Number 2 (610 mm) Dynafile 1/ 90010
7 214 Coated Abrasive Bands For Use With Expander Wheels ABRASIVES AND FILES Non-Woven Nylon Bands For Use With Expander Wheels DC Dynacut Zirconia Alumina Dynabrade Non-Woven Nylon Length Width 36 Grit 60 Grit 80 Grit 120 Grit / 1-1/ 5" (127 mm) 1-1/ 1-1/ 2 1-1/ 1-1/ DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC Coarse Medium Length Width Brown Maroon / 1-1/ 5" (127 mm) 1-1/ 1-1/ 2 1-1/ 1-1/
8 Coated ABRASIVES AND FILES 215 NewEdge Scalloped-Edge Abrasive Discs For Use With These Connects Vacuum Diameter Dynabrade Tools to Type Grit Grit Micron Micron Micron 3-1/ (89 mm) Random Orbital and Gear-Driven Sanders Aluminum Oxide Non-Vac " (127 mm) Non-Vac Vacuum Non-Woven Nylon, for Pad Dynabrade For Use With These Vacuum Medium Fine Diameter Dynabrade Tools Type Maroon Gray 3-1/ (89 mm) 5" (127 mm) Random Orbital and Gear-Driven Sanders Non-Vac Non-Vac Vacuum Sample Kits Each kit contains 3 of each NewEdge Scalloped-Edge abrasive disc listed, relative to diameter and vacuum type. Diameter 3-1/ (89 mm) Kit Part No Vacuum Kit Part Diameter Type No. 5" Non-Vac (127 mm) Vacuum Non-Woven Nylon Discs 3/ Scotch-Brite Surface Conditioning Connects SE Coarse Coarse Medium Very Fine Super Fine Ultra Fine Dimensions For Use With These Dynabrade Tools to Brown Maroon Blue Gray White Mini-Dynorbital / (32 mm) and Dia. Roloc Roloc Dia. Roloc / (286 mm) Random Orbital and Gear-Driven Sanders Tear Drop Triangular Dynafine Sanders
9 216 ABRASIVES AND FILES Coated Abrasive Discs Regalite 751U Stikit Gold 216U DC Dynacut Aluminum Oxide Connects Vacuum Number Diameter For Use With These Dynabrade Tools to Type of Holes Grit Grit Grit Grit Grit Grit Grit Grit Grit Grit 3-1/ (89 mm) 5" (127 mm) 6" (152 mm) 8" (203 mm) 11-1/ (286 mm) Tear-Drop Triangular Dia. Random Orbital Sanders Random Orbital and Gear-Driven Sanders Dynafine Sanders DC DC PSA Non-Vac Vacuum PSA Non-Vac Non-Vac Vacuum Non-Vac Vacuum Non-Vac Vacuum Non-Vac Vacuum PSA Non-Vac Vacuum Non-Vac Vacuum Non-Vac Vacuum O-Style PSA Non-Vac Non-Vac PSA Non-Vac Loop Non-Vac Micro-Finishing Film Connects Vacuum Number ,000 Diameter For Use With These Dynabrade Tools to Type of Holes Grit Grit Grit Grit Grit 3/ Mini-Dynorbital SC SC Silicon Carbide Aluminum Oxide PSA Non-Vac PSA Non-Vac / (32 mm) SC PSA Non-Vac PSA Non-Vac For Use With These Connects Vacuum Number Diameter Dynabrade Tools to Type of Holes Micron Micron Micron Micron Micron 11-1/ (286 mm) Random Orbital and Gear-Driven Sanders Non-Vac Vacuum O-Style
10 ABRASIVES AND FILES 217 Coated Abrasive Discs (Cont d) Locking-Type Dia. Vacuum DC DC Dynacut Zirconia Alumina Diameter For Use With These Dynabrade Tools Grit Grit Grit Flap Discs Locking-Type Aluminum Oxide Diameter For Use With These Dynabrade Tools Grit Grit Grit Grit and Dia Ceramic Coated Discs Roloc F Diameter For Use With These Dynabrade Tools Grit Grit Grit Grit Grit Grit and Dia Dia / (114 mm) 4-1/ (114 mm) Dia Trizact Abrasive Discs Connects Vacuum Number A35 A10 A5 Diameter For Use With These Dynabrade Tools to Type of Holes Green Blue Orange 1-1/ Mini-Dynorbital Trizact Hook-It II Non-Vac / (286 mm) Random Orbital and Gear-Driven Sanders Hook-It II Non-Vac
11 218 ABRASIVES AND FILES Coated Abrasive Discs (Cont d) Cerium Oxide 568XA Discs Scotch-Brite Bristle Discs Maximum 50 Grit 80 Grit 120 Grit Length For Use With These Dynabrade Tools RPM Green Yellow White and Dia. Cerium Oxide 568XA Connects Vacuum Number Diameter For Use With These Dynabrade Tools to Type of Holes 568XA 11-1/ (286 mm) Random Orbital and Gear-Driven Sanders Hook-It II Non-Vac , , / (114 mm) 4-1/ (114 mm) Dia. 12, Clean n Strip Discs Dynastraight SXCRS Center Length For Use With These Dynabrade Tools Dia. Hole Coarse 1/ 1/ 5" (127 mm) 6" (152 mm) Non-Woven Nylon Wheels Abrasive Impregnanted Dynastraight Dynisher Scotch-Brite Surface Conditioning Center Length For Use With These Dynabrade Tools Dia. Hole Coarse Medium 6" (152 mm)
12 Dynastraight Flapper Dynisher ABRASIVES AND FILES 219 Coated Abrasive Flap Wheels Aluminum Oxide Wheel Center Length For Use With These Dynabrade Tools Width Thread Hole Grit Grit Grit Grit Grit 2-1/ (64 mm) 1/-20 Female / Coated Abrasive Sanding Stars Spindle-Mount Stars Shank Diameter For Use With These Dynabrade Tools Dia. Grit Grit Grit Grit Grit Grit Grit Lightweight Dyninger 1/ Aluminum Oxide Arbor-Mount Stars Center Diameter For Use With These Dynabrade Tools Hole Grit Grit Grit Grit Grit Grit Grit Lightweight Dyninger 1/ Aluminum Oxide " (203 mm) Dyninger Eyelet Stars Center Diameter For Use With These Dynabrade Tools Hole Grit Grit Grit Grit Grit Grit Grit 3/ 3-48 Aluminum Oxide / Lightweight Dyninger / / /
13 220 ABRASIVES AND FILES Coated Abrasive Strips Dynafine Finger Sander Aluminum Oxide Length For Use With These Dynabrade Tools Width 120 Grit 180 Grit 240 Grit 3/8" (10 mm) / 6" (152 mm) 1/ 1/ Coated Abrasive Sheets Dimensions Connects Vacuum Number Width x Length For Use With These Dynabrade Tools to Type of Holes Grit Grit Grit Grit Grit Grit Grit Grit Grit 75 mm x 110 mm Dynabug II Sanders PSA Aluminum Oxide SC Silicon Carbide Non-Vac Vacuum Non-Vac Vacuum mm x 133 mm Dynabug II Sanders Non-Vac PSA Vacuum Non-Vac Vacuum (4+4) / x 2-3/ (89 mm x 70 mm) Dynafine Backsplash Sander SC PSA Non-Vac / x 7" (93 mm x 178 mm) 100 mm x 148 mm Dynabug and Dynaline Sanders Dynabug II Sanders with Sanding Pad PSA Non-Vac Non-Vac Vacuum 7 (Delta) / x 7/8" (114 mm x 22 mm) Dynafine Raised Panel Sander Non-Vac / x 4-1/ (114 mm x 108 mm) Dynabug Model T and Dynabug II with Clips Non-Vac
14 DynaMitt Sheets Coated ABRASIVES AND FILES 221 Dimensions Connects Backing Width x Length For Use With These Dynabrade Tools to Type Weight Grit Grit Grit Grit Grit Grit 4-3/ x 7-7/8" (121 mm x 200 mm) DynaMitt Sanding Glove Aluminum Oxide, Gold Aluminum Oxide Paper N/A Cloth J Non-Woven Nylon Dimensions For Use With These Dynabrade Tools Very Fine 4-3/ x 7-7/8" (121 mm x 200 mm) DynaMitt Sanding Glove Dynabrade Sample Kits Each kit contains: 1 non-woven nylon sheet 1 each of grit paper sheets 2 each of 80/120 grit paper sheets 2 each of 80/180 cloth sheets Dimensions 4-3/ x 7-7/8" (121 mm x 200 mm) Kit Part No Non-Woven Nylon Sheets Dimensions For Use With These Dynabrade Tools Medium Fine Very Fine Super Fine x 7" (102 mm x 178 mm) Dynaline Sanders Scotch-Brite Clean n Finish Dynabrade Non-Woven Nylon / x 7/8" (114 mm x 22 mm) Dynafine Raised Panel Sander Coated Abrasive Rolls Connects Width For Use With These Dynabrade Tools to Grit Grit Grit Grit Grit 2-3/ (70 mm) Dynaline Sanders Stikit Gold 216U PSA / (93 mm) Dynabug Sanders PSA Dynascaler Flaps and Hub Flaps, Type C Roto Peen Hub Dynabrade Flap Size For Use With These Dynabrade Tools Heavy Duty Width For Use With These Dynabrade Tools Part No. Dynascaler / (57 mm) Dynascaler 30330
15 222 ABRASIVES AND FILES Reinforced Depressed Center Wheels Type 27 Aluminum Oxide Diameter For Use With These Dynabrade Tools Center Hole 24 Grit Dia. Depressed Center Wheel Grinders 3/8" (10 mm) Green Corps Cut-Off Wheels 3/8" (10 mm) Center Hole 24 Diameter For Use With These Dynabrade Tools Thickness Grit or Cut-Off Wheel Tools 1/16" (2 mm) /3 (1 mm) Diamond Cut-Off Wheels Continuous Rim Side Spoked Gulleted/Slotted Center Wheel Diamond Part Diameter For Use With These Dynabrade Tools Arbor Hole Thickness Grit Wrap Wheel Type No. Dia. Cut-Off Wheel Tools 3/8" (10 mm) 3/3 (2 mm) 1/8" (3 mm) Continuous Rim Side Spoked Dia. Cut-Off Wheel Tools 3/ Continuous Rim /3 (2 mm) 1/8" (3 mm) Side Spoked Gulleted/Slotted / (114 mm) 4-1/ (114 mm) Dia. Cut-Off Wheel Tools 3/8" (10 mm) 3/3 (2 mm) 1/8" (3 mm) Gulleted/Slotted " (127 mm) 5" (127 mm) Dia. Cut-Off Wheel Tools 3/ Continuous Rim /3 (2 mm) 1/8" (3 mm) Side Spoked Gulleted/Slotted 93662
16 ABRASIVES AND FILES 223 Bi-Metal Reciprocating Saw Blades Teeth per Part Length x Width For Use With These Dynabrade Tools Thickness Shank Inch Shape Number 6" x Taper (152 mm x Taper) Reciprocating Saws.05" (1.3 mm) 1/ " x 3/ (152 mm x 19 mm).035" (0.9 mm) 1/ Reciprocating Files File Shank Part Length For Use With These Dynabrade Tools Type Cut Type Dia. Shape Number Equaling Square Dynadie III Straight Medium Cut 1 1/8" (3 mm) Three Square Half Round Crochet /- (89 mm-102 mm) Round Equaling Curved Fine Cut 1 1/8" (3 mm) Square Three Square Half Round Crochet Round Shank 00 0 Length For Use With These Dynabrade Tools Dia. Shape Very Coarse Coarse 6" (152 mm) Dynadie III 5/3 (4 mm) 1/ Pillar Half Round Round Triangular Square Reciprocating Filers 1/8" - 1/ Tapered (3 mm - 6 mm) Foundry 90985
Where to Sell Dynabrade Tools, From A-Z
Where to Sell Dynabrade Tools, From A-Z Comprehensive Guide to Dynabrade Sales Opportunities Reorder No. EUR14.32 Agricultural Equipment Applications: Surface preparation of weld areas, deburring, cleaning
More informationSURFACE CONDITIONING CUTTING ABRASIVES
SURFACE CONDITIONING CUTTING ABRASIVES 399 ABRASIVES SURFACE CONDITIONING POWERBLEND 503515 POWERBLEND SCD Flap Disc Surface Conditioning Super High Performance (for Angle Grinders) POWERBLEND SCD flap
More information, Hookit, PSA. & Random Orbital Sanding Solutions. Solid Surface. Composites. Gel Coat. E-Coat
Name NX 216U 3M 3M Stikit, Hookit and PSA Selection Guide 236U 255L 202DZ 348D 415U Stikit, Hookit, PSA & Random Orbital Sanding Solutions Gel Coat Composites Solid Surface Substrate Application Metal
More informationAbrasives 31. Abrasives. ACCESSORIES Rubber Slotted Expander Wheels Slotted wheels for use with evenrun bands.
215587 Pages 30-39 7/21/03 2:57 PM Page 30 3M Evenrun Bands Aluminum oxide bands are made of high-grade mineral and a bonding system which reduces shelling of the mineral. Economical abrasive bands for
More informationBuffing Wheels PRICE LIST
PRICE LIST In response to requests for an on-line price list, here it is. Prices are subject to change without notice. Generally, prices for buffs, abrasives and accessories are per piece; compounds per
More informationSandpaper Product Guide. Premium Automotive Aftermarket Quality Complete Selection of Hand & Power Sanding Accessories Excellent Value
Sandpaper Product Guide Premium Automotive Aftermarket Quality Complete Selection of Hand & Power Sanding Accessories Excellent Value Index Introduction to Abrasives Abrasive Components... 3 Sandpaper
More informationabrasives Accessories
Accessories Norton Rapid Strip Brush The Norton Rapid Strip brush easily attaches to your compact hand drill and produces results comparable to sand or bead blasting. Ideal for metal, masonry or fiberglass,
More informationSTRIP BISCUITS BACKING PAD HOLDERS SCUFF BELTS TUFF DUTY. 10 Discs per Box. Stock No.: 2 Dia. # U2SB 3 Dia. # U3SB 4 Dia. # U4SB U3SB U2SB U4SB
STRIP BISCUITS TUFF DUTY HD and flexible applications Resilient dense core Black 10 Discs per Box 2 Dia. # U2SB 3 Dia. # U3SB 4 Dia. # U4SB U3SB U2SB U4SB SCREW-LOK BACKING PAD HOLDERS 1 # U1B 2 # U2B
More informationWENDT USA, LLC Wendt USA, LLC Wendt USA, LLC
WENDT USA, LLC Over the next year, you will see a change to our new company logo. We will be rolling it out in our literature, packaging and our forms. You are getting the same high quality product you
More informationP n e u m a t i c To o l A c c e s s o r i e s INDUSTRIAL
P n e u m a t i c To o l A c c e s s o r i e s INDUSTRIAL 01 Velcro Sanding Paper & Self-Adhesive Type SANDING PAD & PAPER MSA-082 1/2 Velcro Sanding Pad Spindle Thread: M10 MSA-092 3/4 Velcro Sanding
More informationProduct Range. Solutions for Industry.
Product Range Solutions for Industry www.master-abrasives.co.uk Introduction Master Abrasives has a hard and long earned reputation in the UK abrasives market for providing solutions with high quality
More informationHAND PADS. Hand Pads AJAX ALO MEDIUM HAND PADS. Product Features Premium quality Nylon fiber High performance ALO grain
HAND PADS Hand Pads CUMI offers wide range of nonwoven abrasive hand pads for free sanding and machine sanding operations. Made from premium quality Nylon web, coated with high performance synthetic abrasives
More informationPRECISION SURFACES INTERNATIONAL, INC.
PRECISION SURFACES INTERNATIONAL, INC. 922 ASHLAND STREET HOUSTON, TEXAS 77008-6734 +1-713-426-2220 800-843-0950 FAX +1-713-426-2223 FAX 800-414-1644 www.psidragon.com info@psidragon.com DYNABRADE TOOLS
More informationAbrasives & Pads. ingersollrandproducts.com/accessories
97 ingersollrandproducts.com/accessories 98 Consumables & Attachments Quick Change Abrasives Sets Ingersoll Rand offers a complete line of 1-1/2" to 3" surface-conditioning discs designed to maximize the
More informationAbrasives & Engineering Materials
INTERNATIONAL ORDERLINE Abrasives & Engineering Materials Abrasives - contents Abrasives Drill and Die Grinder- Abrasives & Wire Brushes Angle Grinder - Discs, Flap Discs & Wire Brushes 2018 2018 2019
More informationPOWER TOOL ACCESSORIES
POWER TOOL ACCESSORIES SUPER PREMIUM CHALLENGER SEGMENTED SAW 100% hot press Anti clog bond system High premium treated diamonds Effortless fast cutting Segmented 105 1.8 X 8 20 Super Hard Granite and
More informationWoodworking & Solid Surface Finishing Products
Woodworking & Solid Surface Finishing Products Abrasives for the Wood Industry Engineered for the woodworking professional. Mirka surface finishing products and solutions are used throughout the woodworking
More informationReliable solutions with optimised performance
Reliable solutions with optimised performance 3M innovation provides quality you can count on in a full line of premium engineered abrasives and convenient all-purpose abrasive products for use in stock
More informationTools Sec. 23 $SU. 201
Tools Sec. 23. 201 2 2" & 3" Disc Holder Quick Change 5 2" Disc Green Zirconia Surface Removal 7 2" Disc Surface Conditioning 6 3 3" Disc Green Zirconia Surface Removal 7 3" Disc Surface Conditioning 6
More informationTools Sec. 23 Jun. 2018
Tools Sec. 23 Jun. 2018 2 2" & 3" Disc Holder Quick Change 5 2" Disc Green Zirconia Surface Removal 7 2" Disc Surface Conditioning 6 3 3" Disc Green Zirconia Surface Removal 7 3" Disc Surface Conditioning
More informationINSTALLATION GUIDE VERSION 11/14
INSTALLATION GUIDE VERSION 11/14 In this guide we will demonstrate effective techniques and methods for installing EDGE stainless steel sinks seamlessly in both laminate and solid surface. These techniques
More informationEMBRACE GRIND THE CUT-OFF DISCS GRINDING DISCS FLAP DISCS
EMBRACE THE GRIND CUT-OFF DISCS GRINDING DISCS FLAP DISCS grind The daily just got easier. At Osborn, we take pride in delivering results. We believe in innovation. Our deep understanding of applications
More informationSuper Closeout Deals
Super Closeout Deals Fastronix dealers as well as the general public are welcome to purchase items from our Super Closeout Deals page. You will find a wide assortment of products PRICED TO MOVE! If you
More informationTools Sec. 23 2FW. 2018
Tools Sec. 23. 2018 Kits Ratchet Type Standard Nutsert Tool Part # Included In Kit Sizes Tool Type Qty. 12938 Nosepiece and Mandrel included 10-24, 10-32, 1/4"-20, 5/16"-18, 3/8"-16 Thread Size Nosepieces
More informationFOR INFORMATION CALL FLEX(3539) or VISIT OUR WEBSITE AT FLEXOVITABRASIVES.COM FLEX (3539) flexovitabrasives.
Corporate Offices, Manufacturing Facility, Eastern U.S.A. Sales & Distribution Center 305 Eden-Evans Center Rd. Angola, New York 4006 United States of America Tel: (76) 952-9290 (76) 549-50 Fax: (76) 549-4078
More informationPOWER CARVERS/ACCESSORIES
16 POWER CARVERS/ACCESSORIES Foredom Tools and Accessories Foredom No. 8 handpiece - slim handpiece. Chuck guard sleeve protects fingers and permits close work. Slides back when changing accessories. Includes
More informationFibratex Convolute Wheels
Clean and Finish Convolute Wheels Soft, conformable Open-mesh Consistent finish Reduced loading An open-mesh product for cleaning and finishing operations. These wheels are: used with light/moderate pressure
More informationTitan Installation Instructions
Titan Installation Instructions Introduction: This manual was written to cover the fabrication and installation of sink bowls and tub and shower surrounds in residential and commercial applications. As
More information(mm) x x x x x
Waterproof Paper Sheets Flexible latex impregnated, anti-slip paper backing with a fully resin-bonded grit. The paper can be used wet or dry as a durable abrasive for hand finishing. Supplied in full sheets
More informationMILWAUKEE TOOLS
INDEX ACCESSORIES BATTERY PACKS/CHARGER... 14-7 BIT EXTENSION... 14-9 BLADES BAND SAW... 14-7 CIRCULAR SAW... 14-10 SHEAR FOR MODEL 6850... 14-7 HOLE SAW KITS... 14-8 HOLE SAWS 4/6 BI-METAL... 14-8 ARBORS...
More informationPFERD Australia - World Of Tools
PFERD Australia - World Of Tools VERTRAU BLAU Trust In The Blue Known globally for manufacturing quality abrasives. Your total abrasive solution. Tradition, Progress, Innovation A leading manufacturer
More informationBlower Cutter Jig Saw Circular Saw Circular Saw Drill High Speed Drill High Speed Drill Mixer Hammer Drill Hammer Drill Demolition Hammer
Index M00 M00 M0801K M0901 M0920 M0921 M1902 M2300 M2401Z M3600 M3601 M3700 Cutter Drill Power Planer Compound Miter Saw Portable Cut-off Router Router (Plunge type) Trimmer 08 08 M4000 M4101 M4301 M5801
More information3M Belt Selection Guide. 3M Backstand, Benchtop and Portable Tool Belts. Belts
3M Belt Selection Guide 3M, Benchtop and Belts Application Metal Type Belt Product Grinding Light Grinding Blending Deburring Finishing Cleaning Coatings Removal Stainless Steel Aluminum Carbon Steel Titanium
More informationE TREMEFLAP FLAP WHEELS
E TREMEFLAP REFERENCE & APPLICATION GUIDE Flap Wheels EASY WAYS TO PLACE AN ORDER Phone: 905 282 1313 Fax: 905 282 1313 e-mail: sales@extremeabrasivesl.com Over the Web: (coming soon) EXTREME ABRASIVES
More informationINDASA has a range of products that covers all coated abrasive needs for the Automotive Refinishing Industry and other Industrial applications.
Product Range INDASA has a range of products that covers all coated abrasive needs for the Automotive Refinishing Industry and other Industrial applications. Our sales figures and international presence
More informationBONDED ABRASIVE PRIMER
BONDED ABRASIVE PRIMER Basic information on the terminology and use of bonded abrasive products. Property of: KASCO ABRASIVES Coldwater, Michigan 1-800-367-729 Fax 517-279-7265 1 GENERAL BONDED ABRASIVES
More informationABRASIVE CATALOGS. Application: Weld dressing Cutting off smoothing of Casting Can be applied on various kind of Steel and non-ferrous materials
ABRASIVE CATALOGS Reinforced Depressed Centre Grinding Discs are excellently fabricated depressed centre grinding discs that are exclusively available in varying diameters of 4-9 in different thickness.
More informationOrder from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA ph: (410) (800) fx: (410) (800)
from MARYLAND METRICS P.O. 6 Owings Mills, MD 7 USA ph: (4)80 (800)6880 fx: (4)84 (800)8799 BEltS SeRieS 900: SpeC CHeCk material Aluminum Cast Iron Brass/Bronze Die Castings Carbon Steel Stainless Steel
More informationTECHNICAL BULLETIN BELT FINISHING WITH MICRO-MESH
TECHNICAL BULLETIN BELT FINISHING WITH MICRO-MESH MICRO-MESH finishing belts provide desired surface qualities and economic benefits to many types of finishing operations, and are available in a range
More informationFinishes and Finishing Techniques
Finishes and Finishing Techniques TED 126 Spring 2007 Review pages 147-150, 284-294 Finishes and finishing techniques The finishing process to choose depends partly on the type of wood and the appearance
More informationO N T H E C U T T I N G E D G E O F T E C H N O L O G Y
A B R A S I V E P R O D U C T S C A T A L O G U E O N T H E C U T T I N G E D G E O F T E C H N O L O G Y Founded in 1981, Grinding Techniques (Pty) Ltd. is the largest privately owned abrasive manufacturer
More informationMarvel Abrasive Tools
+91-8048763597 Marvel Abrasive Tools https://www.indiamart.com/marvelabrasivetools/ Our company is among the leading manufacturers and exporters reckoned for offering a precisely designed array of Grinders,
More informationSolid Surfaces. Sanding and polishing solid surface materials chemical-concepts.com
Solid Surfaces Sanding and polishing solid surface materials.800.220.966 chemical-concepts.com Classic solid surfaces Classic solid surfaces Application recommendations for classical solid surface materials.
More informationProduct Overview. Electric Pneumatic Hydraulic. Concrete and Masonry Dust Collection Systems Hot Work Zone Tools
Electric Pneumatic Hydraulic Product Overview Metalworking Surface Finishing Surface Preparation Concrete and Masonry Dust Collection Systems Hot Work Zone Tools www.csunitec.com Metalworking In the shop
More informationPliers. Pliers PLIERS
Pliers Pliers PILERS Long Nose Pliers With Side Cutter Comfortable two-component handles combine durability with a secure non-slip grip. High-leverage joint placement increases leverage to reduce the cutting
More informationSOUTHERN COLUMBIA AREA SCHOOL DISTRICT TECHNOLOGY EDUCATION BID WOOD SHOP UNIT TOTAL QUAN UNIT DESCRIPTION CO MFG# CAT # COST COST COMMENTS
2 BOX GERSON DISPOSABLE RESPIRATOR MASK-50/BX PAXTON 1501 340094 $ - $ - 4 ROLL ABRASIVE DISCS 5" STIKIT, 220 GRIT, ROLL/100 PAXTON 524306 $ - $ - 6 ROLL ABRASIVE DISCS 5" STIKIT, 80 GRIT, ROLL/100 PAXTON
More information7th/8th Grade Industrial Tech General Safety. Give your undivided attention to the machine in which you are using.
7th/8th Grade Industrial Tech General Safety Wood Lab Safety General Safety Always wear safety glasses. Report all injuries to the instructor. No baggy clothing or open toed shoes. Give your undivided
More informationSheet Metal Tools. by:prem Mahendranathan
Sheet Metal Tools by: SHEET METAL TOOL KIT SHEET METAL TOOLS Rivet Gun 3/32, 1/8, 5/32, 3/16",Cupped Set Mini Bucking Bar Footed Heel-Toe Bucking Bar Air Tool Oil Mechanics Tool Bag High-Speed Air Drill
More information3M Abrasive Systems. Sanding made simple.
3M Abrasive Systems Sanding made simple. Introducing Sanding Made Simple. For more than 100 years, 3M Science has provided technologies designed to make your life easier and improve the world one finish
More informationCutting, Grinding and Abrasive Accessories
High quality range of abrasive cutting discs, grinding discs and surface preparation accessories engineered for ultimate performance Universal Diamond Blades Cutting and Grinding Discs The essential construction
More informationApril 2018 Edition STANDARD DUTY
April 2018 Edition STANDARD DUTY INDUSTRIAL POWER TOOLS Index Angle Grinder 4 Belt Sander 4 Blower 6 Circular Saw 5 Compound Mitre Saw 5 Demolition Hammer 3 Drill 3 Jig Saw 5 Finishing Sander 4 Rotary
More informationABRASIVES. Buffalo Dental Manufacturing Company, Inc.
ABRASIVES Buffalo Dental Manufacturing Company, Inc. www.buffalodental.com 2 Abrasives, Blue Mounted Points Blue mounted points ideal for trimming and finishing dentures, temporaries and restorative materials.
More informationAbrasive Systems Division. Scotch-Brite Surface Conditioning Wheels. Driving consistency. with 3M Abrasives
Abrasive Systems Division Surface Conditioning Wheels Driving consistency with 3M Abrasives Wheels wheels, one of the most complete selections of surface conditioning wheels, continue to raise the bar
More informationHand Sanding. 4 ALI INDUSTRIES, INC. :: Sanding Sheets
Hand Sanding :: Sanding Sheets :: Sanding Sponges :: Zip Sander :: Sanding Tools :: Synthetic Steel Wool 4 ALI INDUSTRIES, INC. www.gatorfinishing.com Hand Sanding Hand Sanding Hand sanding products from
More informationAgricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
More informationFinishing. Separating and grinding discs. Supercut ST separating discs. Supercut separating discs for ceramic
Separating and grinding discs Supercut ST separating discs maximum cutting efficiency minimal breakage risk excellent strength nylon reinforced quality Color: brown Recommended speed: 15000 min -1 Maximum
More informationCREATIVE TECHNOLOGY. Products Guide GRINDING WHEELS DRESSER VITRIFIED CBN WHEELS DIAMOND WHEELS & TOOLS PERIPHERAL EQUIPMENTS & RELATED PRODUCTS
CREATIVE TECHNOLOGY Products Guide GRINDING WHEELS DRESSER VITRIFIED CBN WHEELS DIAMOND WHEELS & TOOLS PERIPHERAL EQUIPMENTS & RELATED PRODUCTS Diprotex meets all your grinding and polishing requirements,
More informationChapter 26 Abrasive Machining Processes. Materials Processing ABRASIVE MACHINING 10/11/2014. MET Manufacturing Processes
MET 33800 Manufacturing Processes Chapter 26 Abrasive Machining Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing Chapters
More informationContents. pages 20-24: Installing Edge sinks into. custom laminate countertops page 8: Installing Edge sinks into postform laminate countertops
Contents pages 2-8: Installing Edge sinks into custom laminate countertops page 8: Installing Edge sinks into postform laminate countertops pages 9-14: Installing Acrylic sinks into custom laminate countertops
More informationDEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES
DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES PRICE HEAVY-DUTY BLADES PER PER E-BLADES NUMBER Great Low Prices E-100 10 22025 $14.65 Heavy Duty HSS for steel and aluminum.
More informationThe World of Jöst abrasives
The World of Jöst abrasives useit-abrasives m a d e b y J Ö S T The brand for high-quality abrasives Almost dust-free - quick and effective suction removal of sanding dust With the development and patenting
More information3M Industrial Products. Industrial Products for Woodworking
3M Industrial Products Industrial Products for Woodworking 3 Complete solutions. Commitment to Innovation and Quality. Complete solutions. It s what you ve come to expect from 3M, the leading supplier
More informationAbrasives for Precision Grinding
Genuine STARCKE. Since 1829. Abrasives for Precision Grinding www.st a r c k e.de Genuine STARCKE. Since 1829. EXCELLENCE IS NOT A MATTER OF CHANCE. Abrasives from STARCKE are typical products Made in
More informationBasic function of head = reading information on the hard disc. Magnetic head mounted to a SS suspension arm. Hard Disc Air gap (
Basic function of head = reading information on the hard disc Magnetic head mounted to a SS suspension arm Hard Disc Air gap (0.001-0.002 mm) Head mounted to a SS suspension arm Physical Properties of
More informationKnotted Shank Brushes
Knotted Shank Brushes Knot Wheel Brushes with Shank 6 mm Ø D A H Z RPM Pack. steel 0.35/0.014" steel 0.50/0.020" stainl. 0.50/0.020" mm /inch mm /inch max. Art. No. Art. No. Art. No. 75 / 3 9 / 3/8 15
More informationDEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES
DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES Great Low Prices HEAVY-DUTY E-BLADES BLADES PER NUMBER E-0 22025 PRICE PER $14.20 Heavy Duty HSS for steel and aluminum.
More informationBurnishing machine TRINOXFLEX Set. BSE Set
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Burnishing machine TRINOXFLEX Set BSE 4-3 00 Set 433.438 Power input 400 watt Power output 880 watt Max. tool Ø 25 Tool width 00 Tool
More informationAdvised RPM 50x100x19 AC AM AF AVF x100x19 AC AM AF AVF x110x19 AC AM AF AVF
KEY WAY FLAP brushes FOR METAL WORKING COATED ABRASIVE KWF KWF with flexible coated abrasive flaps for rust removal, welding marks, oxidations and masking of metal surfaces. 2988 corundum cloth easily
More informationNecessity leads to innovation
Necessity leads to innovation www.marvelabrasivetools.com Marvel Abrasive Tools Total Industrial Solution Surface & Paint Finishing Metals, Wood, Plastic & Composite Materials Abrasives Velcro / PSA Discs,
More informationSURFACE CONDITIONING
SURFACE CONDITIONING SURFACE CONDITIONING Abcon SCM products feature a non-woven, three-dimensional design for high performance applications on steel, stainless steel, aluminum, titanium and exotic alloys.
More informationBRUSHES WITH SHANK 60 61
60 6 Wheel Brushes with Shank Knot Wheel Brushes with Shank Ø 6 mm D A H Z R RPM Pack. STH 0. 0.0 STH 0.0 0.00 ROH 0.0 0.00 mm inch mm inch mm inch max. Art.-No. Art.-No. Art.-No. 7 9 /8 /8 8,000 0 7.98.
More informationAdditional requirements and conditions for abrasive products to be marked with the osa symbol
Appendix of paragraph 3 of the Conditions of Use for the osa Trademark Additional requirements and conditions for abrasive products to be marked with the osa symbol Conformance with the European safety
More informationO N T H E C U T T I N G E D G E O F T E C H N O L O G Y
A B R A S I V E P R O D U C T S C A T A L O G U E O N T H E C U T T I N G E D G E O F T E C H N O L O G Y Founded in 1981, Grinding Techniques (Pty) Ltd. is the largest privately owned abrasive manufacturer
More informationSawing Basics V63WCWO3. Operator Variables That Aid Sawing Performance
Sawing Basics V63WCWO3 Operator Variables That Aid Sawing Performance When making blade recommendations, there are a few questions we need to answer: Which blade do we use? Which tooth pitch do we use?
More informationTHE COMPLETE RANGE OF ABRASIVE PRODUCTS FOR MERCHANDISING PRODUCT CATALOGUE
THE COMPLETE RANGE OF ABRASIVE PRODUCTS FOR MERCHANDISING PRODUCT CATALOGUE 2018 2 CONTENTS INTRODUCTION 4 The Flexovit Merchandising Program 4 The Flexovit Brand History 5 A Corporate Perspective 5 How
More informationCATALOG ABRASIVES SERVING SMALL BUSINESS, FARM & RANCH, HOME WORKSHOPS, AUTOMOTIVE AFTERCARE, & THE INDUSTRIAL MARKETS SINCE 1932 P-10851
2016 ABRASIVES CATALOG SERVING SMALL BUSINESS, FARM & RANCH, HOME WORKSHOPS, AUTOMOTIVE AFTERCARE, & THE INDUSTRIAL MARKETS SINCE 1932 ABRASIVES CATALOG P-10851 Abrasives catalog Forney industries 2057
More informationVICTOGRAIN Simply better
Simply better Innovation TRUST BLUE Triangular, precision-formed abrasive grain Fastest work progress Longest tool life General information VICTOGRAIN products are some of the most effective grinding tools
More informationDIAMETER SELECTION ABRASIVE SELECTION
GENERAL APPLICATION AND SELECTION OF the tool DIAMETER SELECTION Tool diameter is determined by the nominal bore size in which the tool is to operate. The Flex-Hone Tool is always produced and used in
More informationBY LACKMOND TILE PRODUCTS AND SOLUTIONS EQUIPMENT ACCESSORIES DIAMOND TOOLS
TILE PRODUCTS AND SOLUTIONS EQUIPMENT ACCESSORIES DIAMOND TOOLS BEAST 10" WET TILE SAW BLADE SIZE: MOTOR CAPACITY: RIP CUT CAPACITY: DIAGONAL CUT CAPACITY: DEPTH OF CUT AT 90 : DEPTH OF CUT AT 45 : BEVEL:
More informationIndustrial Price List Sandpaper, Backup Pads & Housing
Industrial Price List Sandpaper, Backup Pads & Housing ULTIMATE BROWN PAPER: A Weight Paper Not very aggressive Good for base coat/clr coat sanding Good for Body Shops & Woodworking Less chance of swirel
More informationOur existing DG diamond tools are as follow:
A.R.E. Blue Classic Products, LLC. 539 G ST. BLAINE WA.US. 98230 FAX: 360-332-5232 360-319-8254 360-332-5232 areblueclassic@gmail.com www.areblueclassic.com A.R.E. Stands for Artistically Designed, Real
More informationCross Peen Hammer. Introduction. Lesson Objectives. Assumptions
Introduction In this activity plan students will develop various machining and metalworking skills by building a two-piece steel hammer. This project will introduce basic operations for initial familiarization
More informationEDM Polishing Stones General Purpose Stones Detail Stones Industrial Abrasives
EDM Polishing Stones General Purpose Stones Detail Stones Industrial Abrasives Our commitment to our customers is set in stone. About Us For nearly forty years BORIDE Engineered Abrasives has developed
More informationTraditional Grinding & Polishing
Traditional Grinding & Polishing Grinding Wheels 3.2 Discs 3.4 Polishing & Buffing Powders 3.5 Felt Buffers 3.7 SECTION 3 Grinding Wheels RADIAC / NATIONAL SILICON CARBIDE WHEELS A high quality, made in
More informationMAGNETIC DRILL PRESSES AC35 MAGNETIC DRILL PRESS
MAGNETIC DRILL PRESSES AC35 MAGNETIC DRILL PRESS Triple Edge Cutting Features: The CT series features two sets of three cutting tips each with different geometries, balancing and cutting forces. This enables
More informationFlexible Diamond Disc
Diamond Burs - with 2.37mm HP Shanks The abrasive properties of Diamond bonded to the tool ensure fast, easy action & long durability. Used for engraving, drilling, cutting, cleaning castings, etc. Always
More informationGuidelines for working with
Guidelines for working with 1. Sawing Circular Saws When using circular saws, only the circular saw blades that are not set are suitable for cutting PARAPAN. Hardened metal saw blades that have the greatest
More informationABRASIVES. Plus the New Pozzi Malibu Series! 3 Separate Product Lines
ABRASIVES 3 Separate Product Lines Plus the New Pozzi Malibu Series! Since 1971 Abrasives! Mandrels! Pozzi Has Them All! A wide selection of mounted and unmounted points, discs and wheels for operatory
More informationtools cutters 524 orderline: larsson side cutters, larsson end cutters tools
cutters larsson side cutters, larsson end cutters Side Cutters: 999 720 Diagonal cutters, pointed jaws (3054) flush cut for wire Ø 0.35-1.00mm 29.75 999 721 Diagonal cutters pointed jaws (3055) regular
More informationInterproximal Reduction
Interproximal Reduction 10.0 mm 10.0 mm 1.0 mm 0.39 mm Fine Grit Long Item #: 8859-31-010 1.0 mm 0.45 mm Medium Grit Long (Blue Color ID) Item #: 859-31-010 1 pack... $ 46.95/pk 3 or more... $ 44.95/pk
More informationFor Tool Room Applications
High Performance Grinding Wheels... For Tool Room Applications Precision Engineered Grinding Wheels Tell us your needs... We'll Meet Them! Radiac Abrasives offers more than 30,000 precision built products
More informationLooking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.
1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.
More informationPRESENTATION OF METALLURGICAL SUPPLIES A METALLOGRAPHY WORLD CORPORATION POLISHING CLOTH'S
PRESENTATION OF METALLURGICAL SUPPLIES A METALLOGRAPHY WORLD CORPORATION POLISHING CLOTH'S PREMIUM POLISHING CLOTH SAMPLE CARD AVAILABLE Quick reference guide cross compares to Struers & Buehler Cloth
More informationElectron Microscopy Sciences
Electron Microscopy Sciences INSTRUCTIONAL MANUAL CAT. 50120-10 Model 900 Grinding and Polishing Machine P.O. Box 550 s1560 Industry Road s Hatfield PA 19440 1 Introduction The Model 900 is a small, compact
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
Tel: 20-5-8 / Fax: 20-59-7 50 Huyler St / So. Hackensack, NJ 070 USA JIG AND RECIPROCATING Starrett offers industrial quality high speed steel edge bi-metal saw blades. These blades have a high speed steel
More informationSINK BULL. Solutions For The Stone Shop RAPID Z-CUT AND
SINK BULL AND RAPID Z-CUT Solutions For The Stone Shop SINK BULL FEATURES Finally, an affordable, heavy duty, manual sink milling machine designed for the stone shop. The Sink BULL utilizes a simple, rigid,
More informationNew in the PFERD Product Line TRUST BLUE
New in the PFERD Product Line TRUST BLUE New Since Tool Manual 21 I trust blue. Workers all over the world trust blue and choose PFERD. The combination of innovative, high-performance products, world-class
More informationProtective titanium nitrite coating. Double-fluted design. No. of Hole Sizes 1/8 to 1/2 13. Drill Diameter Sizes (In.) 1/4 to 7/8 11 1/16
Step Drill Bits 35-511 35-512 35-513 35-514 Trust IDEAL step drill bits for precise, repetitive drilling through the toughest materials including brass, carbon steel, cast iron, stainless steel, and more.
More informationQuick Release Arbor VOL 2. MULTIFITBLADES oscillating tool blades and accessories. MultiFitBlades.com
Quick Release Arbor VOL 2 MultiFitBlades.com 1-888-594-4442 Machine Compatibility inside cover Applications Overview 2 Blades & Accessories 3 Metal Cutting 3 Wood Cutting 5 Tile Grout & Masonry 9 Scraping,
More informationQUALITY PRODUCTS AND SERVICE FOR OVER 35 YEARS.
QUALITY PRODUCTS AND SERVICE FOR OVER 35 YEARS. Saw Blades BANDSAW BLADES Ram Sales stocks and welds bandsaw blades from a wide variety of World-Class manufacturers. Having multiple sources assures our
More information