ABOUT THE COMPANY Dear customers,

Transcription

1 COMPONENTS FOR IGHTNING RODS AND EARTHING 208

2 ABOUT THE COMPANY We present you the catalog of products and goods of our company with focus on the production of components for lightning conductors and grounding and products of technical brushes intended for versatile use of light and heavy grinding including necessary accessories. From the historical point of view of our company especially important is year 996 when the company started to produce basic assortment of these products in rented premises, created business strategy and started to promote itself on the domestic market. Another important stage was the reconstruction of our own premises in Radkov u Vítkova in 2002 which enabled our company to expand and complement the machinery and technology equipment and at the same time to increase its production capacity. Since 2003 our company has been fully stabilized, equipped with high-quality machinery, our own transport and a team of reliable and competent personnel who are able to respond to your specific requirements This catalog is not a closed system and it will be continuously replenished according to the needs of our customers with new or innovative products and other goods within the business activities of our company All products are covered by the General Product Safety Declaration pursuant to Act No. 02/200 Coll. as amended, and assurance is given on the issuance of a declaration of conformity of products with the applicable standards. The company has established a functional system of management of quality management according to ISO 900: 2008 for activities and services - production, purchase and sale of lightning conductors, grounding and components for lightning conductors. Dear customers, our company s goal is your satisfaction with the quality and reliability of our products, including the provision of high quality technical support and related services in business. We are happy to hear your comments regarding the performance of our products and our staff is ready to respond to your requirements, please refer to our contact and business addresses.

3 KOVOBESK KPS Opava s.r.o., Radkov 5, tel./fax: , Components for lightning rods and earthing Air terminals and holders Pg. strana Insulation poles and holders strana Pg conductor ine supports Pg. strana -0-3 Clamps Pg. -6 strana 4-20 Protective angles Pg. strana 7 2 Protective angle holders Pg. 7-9 strana conductor Earth electrode Pg. strana Contact addresses Complete range including other accessories can be ed at: KOVOBESK KPS OPAVA s.r.o., Radkov kovoblesk@kovoblesk.cz tel.: tel./fax: mobil: mobil: mobil: The company is registered in the Commercial Register of the Regional Court in Ostrava, Section C, File 2998.

4 INTRODUCTION Components for lightning rods and earthing This catalog for lightning conductors and grounding contains all standardized materials for conductor construction and earthing in hot-dip galvanized steel, stainless steel and AlMgSi alloy complete with a complete range of SONAP cable clips, current clamps, rope clamps and tensioning screws. The catalog of parts is processed in a table according to its purpose and use, the nomenclature and the type designation follows the previously valid standards. The range of products and components is continuously supplemented with new elements in accordance with the current standards ČSN EN and ČSN EN 6256 (a complete list of valid standards is given in the Assembly nstructions, which is an integral part of this catalogue). All components are certified according to applicable standards in the Electrotechnical Institute of Prague (Authorized Person No. 20) and serve as a basis for the Declaration of general product safety pursuant to Act No. 02/200 Coll. as amended. Original documents and issued statements (certificates) from other suppliers we represent are filed in our company. Technical solution Components for lightning rods and earthing zinc finish - a comprehensive range of products and components that is continuously updated with new features in line with applicable standards and customer requirements - basic material design steel grade (designation FeZn) - different materials grey, tempered cast iron and plastic (PVC label) are listed in the catalogue for these specific products - the surface finish of the component is hot dip galvanizing - connecting material - steel grade hot dip galvanized or galvanized Components for lightning rods and earthing aluminium design (air terminals) - components in aluminum are marked with a symbol in the catalog AlMgSi - basic material alloy AlMgSi 0,5, F22 semi-hard - without surface finish - connection accessories steel grade, hot dip galvanized or galvanized Components for lightning rods and earthing stainless steel design - components in stainless steel design are marked in the catalogue with symbol stainless steel: N V2A stainless steel.430 (AlSI 304) N V4A stainless steel.440 (AlSI 36) for use in the ground - connection accessories stainless steel in design A2 or A4 The stainless steel parts are combined with any other material (FeZn, Cu, AlMgSi). Assembly of the component is recommended with the conductors according to the specified standards - in the catalogue it is stated for each element separately. In case of combinations of conductors of different materials, observe the recommendations for the composition of these materials according to the table in the technical part of the installation instructions on page 33. Cable clips SONAP - standard series of all-metal fasteners for fastening cables to steel structures and footbridges - certification of the product by the Electrotechnical Testing Institute in Prague, authorized person No basic material steel grade - surface finish hot dip or galvanized zinc treatment We believe our products will find their way to a satisfied customer.

5 CONTENT ine support: Clamps: Protective top covers: oading rod: Protective angels: Holders: Protective pipes Holders: ightning rods, supports, stands, holders: - into a wall: PV0, PV02, PV03, PV04, PV05, PV06, PVP, PV2P, PV3P, PV3P prologend - under tiling: PV, PVb - on top of the truss: PV5 - into a wall, for corrugated eternit and into wooden constructions: PV7, PV8, sealing washer - for flat roofs: PV2 concrete/plastic, PV2self-adhesive - under roofing: PV22 straight, twisted, upper - under roofing: PV22 upper with shaped lock - for metal roofs: PV23, PV24 - for skylights and iron constructions: PV32 - for earthing of power devices: PV4, 42, 43, 44, line support - for wall PV Z - universal support bracket for supports PV5, PV2, PV22 - connecting: SS, SS with liner - eaves clamp: SO small, SO big, SO UNI - attaching: SP, SP UNI, SP UNI A with suspension - cross clamp: SK, SK with liner - testing: SZ alloy, SZ UNI, SZ tubular - universal: SU UNI, SUA, SUB - for pipeline: ST (0 0) - for rain leaders: ST universal - deviation and connecting: SR0, SR02 - earthing: SR03 cast iron, SR03 S, SR03 K steel - for lightning rod: SJ 0 - for earthing rod: SJ 02 - upper: OS0 FeZn - lower: OS04 FeZn - loading rod: TZ - protective angle: OÚ - of protective angle: DuD, DuZ, DuD screw, bolt, DuD UNI, DuD metal plate - protective tube: OT - protective tubes: DoT spike, screw, DoT UNI screw/bolt - with thread: JP/M6, JP/M6 with taper to 0mm/000mm - straight: JP, JP with taper to 0mm/000mm - concrete stand for JP/M6 - concrete stand for JP/adjustable joint - holder for ridge: DJ upper/pv 5 - upper holder: DJH4 - lower holder: DJD4 - stand for JP small/3, big/700 2,3,4 5 6,7 7, Telescopic air terminal: - telescopic air terminal 24 Earth electrodes: Other accessories: Remote ightning Rods: - earthing bars: ZT tubular, ZTP full, ZTP + clamp, ZTT + clamp, ZTX + clamp - earthing belt: ZD0 + clamp - earthing plate ZD02 + clamp - petrolatum tape, superflex - ID labels: labels PVC - Rolled lead: lead Pb - Earthing tape FeZn, stainless steal - eakage earthing wire: FeZn, Cu, AlMgSi, stainless steel, AlMgSi/PVC - Wire rope FeZn - Cable clamps: SONAP - Universal current terminals - Rope clamps: S - Tension bolts: NS - Insulating poles IZT, IZT-V, IZT-J, IZT with concrete weight - Holders of remore lightning rod D OH Assembly instructions: Technical part: Overview of valid standards:

6 SUPPORTS PV 0-03 PV Support of lining into wall for fixing the conductor to masonry or wood recommended conductor diameter: Ø 8 0mm dimension PV FeZn stainless steel V2A PV FeZn stainless steel V2A PV FeZn stainless steel V2A PV FeZn stainless steel V2A PV FeZn stainless steel V2A PV FeZn stainless steel V2A PV P 3P (PV3P extended) Universal plastic holder of lining enables easier assembly and disassembly of conductor. Color design: FeZn grey Wall plug: 8/30/75 PV P - 3P screw wall plug 5/80 8/30/75 PV 3P extended screw wall plug plastic Support of lining into walling, plastic / wall plug for fixing the conductor to the masonry by means of a plastic cable holder and anchoring dowels recommended conductor diameter: Ø 8 0mm PV P FeZn PV 2P FeZn PV 3P FeZn PV 3P extended 5/ MBR 0/20 5/90 MBR 0/60 PV 3P - 55 ( mm) FeZn PV 3P - 55 (90 mm) FeZn Note: other lengths of screws and dowels can be prepared according to individual requirements for facade insulation PV Support of lining under tiling H for fastening the conductor on roof tiles (attachment of the support behind the first roof bar) recommended conductor diameter: Ø 8 0mm PV b H H PV FeZn stainless steel 0 PV b FeZn stainless steel PV b FeZn stainless steel

7 SUPPORTS PV 5 Universal Support of lining at the top of the roof (standard types) H 65 H 70 H 65 H 00 PV 5 Beta PV 5 Bramac PV 5 Tondach PV 5 Bramac low PV 5 Slovakian Tondach, Bramac for fixing the conductor at the ridge of the roof for the most common types of roofing recommended conductor diameter: Ø 8 0mm dimensions (mm) PV 5 UNI A strip 30x, PV 5 UNI B strip 20x3 PV 5 Beta Strip 30x, FeZn stainless steel V2A FeZn Possibility of use type of ridge: Tondach 2 ( 2 2cm) Cembrit (width 22 23cm) H FeZn stainless steel V2A PV 5 Bramac Strip 20x FeZn Possibility of use: type od ridge: Beta Bramac Tondach airing 4 Bobrovka ( 4 20cm) PV Tondach Strip 30x,5 PV 5 Bramac low Strip 20x3 H FeZn FeZn Possibility of use: type of ridge: Tondach 26 ( 3 26cm) Bramac low H PV 5 Tondach (Slovakian) FeZn Strip 20x3 PV 5 Tondach (Slovakian) Strip 30x, FeZn Possibility of use: type of ridge: Tondach Slovakian Bramac 2

8 SUPPORTS PV 5 ERUS 65 H H PV 5 ERUS Strip 30x FeZn Possibility of use: type of ridge: Erlus PV 5 Half-grooved H PV 5 Cembrit H PV 5 Half-grooved 7 Strip 20x3 H H PV 5 Cembrit Strip 20x FeZn Possibility of use: type of ridge: Tondach half-grooved 7 ( 7 8cm) FeZn stainless steel V2A Possiblity of use: type of ridge: Cembrit (width 2,5 3cm) PV 5 indab Support of linig at the top of the roof (for the sheet covering) 0 H for fixing conductor at the top of the roof support is shaped exactly according to the ridge template recommended conductor diameter: Ø 8 0mm H PV 5 indab Strip 30x FeZn stainless steel V2A Possibility of use: type of ridge: INDAB 3

9 SUPPORTS PV 5 Mittal 90 H PV 5 Mittal Strip 30x2 H Possibility of use: type of ridge: Mittal FeZn PV 5 adjustable Bolt 2xM8 65 Support of lining at the top of the roof (adjustable) for fixing conductor at the top of the roof for different kinds of ridges the flexibility of the support range is ensured by moving the movable part to the base of the support recommended conductor diameter: Ø 8 0mm H bolt 2xM8 H Bolt 4xM5 PV 5 Adjustable Bolt 2xM8 PV 5 Adjustable Bolt 4xM FeZn FeZn stainless steel 65 H bolt 4xM5 Possibility of use: type of ridge: Tondach airing 5 ( 5 24,5cm) Tondach smooth (width 7cm) Tondach 2 ( 2-2cm) Tondach 26 (3 26cm) Cembrit Separate support Type PV 5 adjustable plastic stainless steel for fixing conductor at the top of the roof for different kinds of ridges in combination of universal holders (plastic, stainless steel) a separate bracket for cable supports can be used to assemble the support and to secure the conductor see section supports, table pg. 0 M8 (inner) M8 (inner) M8 H bolt 2xM8 Separate support PV5 adjustable H FeZn stainless steel V2A 4

10 SUPPORTS PV7 twist 6 PV 7 twist 8 PV 7 twist 8 extended strap ining support to masonry and wooden structures for fixing conductor to corrugated eternig or by using anchors for masonry and wood recommended conductor diameter: Ø 8 0mm Twist Ø D/length twist PV 7 6/ twist / FeZn PV 7 8/ /00 PV 7 8/ /60 PV 7 8/ /200 PV 7 8/2 00 8/ FeZn stainless steel V2A FeZn stainless steel V2A FeZn stainless steel V2A FeZn stainless steel V2A PV 7 8/ / FeZn 30 PV 7 8/ / FeZn 30 PV 7 8/00 Extended strap 20 8/ FeZn Note: the length of the strap (dimensions ) can be adjusted according to the individual requirement for thermal insulation of the facade. PV 8 twist 0 Twist Ø D/length ine support for corrugated eternit and wooden structures for fixing conductor to corrugated eternit or by using anchors for masonry and wood recommended conductor diameter: Ø 8 0mm twist PV 8 0/ / FeZn PV 8 0/ / FeZn PV 8 0/ / FeZn 30 PV 8 0/ / FeZn 30 Washer Al/rubber Sealing washer 8 rubber metal plate Al for seals of supports with type screws: PV 7, DuD, DoT (as an addition against leakage) Ø D Ø 38 Washer Al38/8 (complet) Ø D FeZn freely 5

11 SUPPORTS PV 2c concrete/plastic/lock x PV 2c/00 concrete/plastic/ bolt M8 Flat roof line support for fixing conductor on flat roofs simple plastic lock to push the conductor, height 70mm the wire is fastened with a steel liner and screw M8, height 00mm Material: UV-resistant plastic with concrete filler enclosed on the underside of the lid recommended conductor diameter: Ø 8 0mm weight ~ kg Ø 40 Ø 40 PV 2c Concrete/plastic/lock x FeZn PV 2c/00 Concerete/plastic/M FeZn PV 2d concrete cube/plastic/ lock 2x PV 2d/00 concrete cube/ plastic/bolt M8 60x00 60x00 for fixing conductor on flat roofs double plastic lock to push the conductor, increases strength of the brackets Material: UV-resistant plastic and bracket for concrete cube recommended conductor diameter: Ø 8 0mm weight ~ kg PV 2d Concrete/plastic/lock x Separate PVC holder Concerete/plastic/M FeZn FeZn for fixing conductor on flat roofs conductor is fastened with a steel strap and screw M8, height 00mm Material: UV-resistant platic and bracket for concrete cube recommended conductor diameter: Ø 8 0mm weight ~ kg PV 2d/00 Concrete cube/plastic/m FeZn PV 2e all-plastic/concrete/ lock 2x 75x30 for fixing conductor on flat roofs double plastic lock to push the conductor, increases strength of the bracket Material: UV-resistant plastic with concrete filler enclosed on the underside of the lid recommended conductor diameter: Ø 8 0mm weight ~,2kg PV 2e All-plastic/concrete/lock 2x FeZn 6

12 SUPPORTS Separate support type PV 2 adhesive ine support on flat roofs steel, plastic Plastic M8 (inner) M8 (external) for gluing or gluing with PVC patch on flat roofs PVC patch is not part of the support supply - its use must be consulted with the supplier of roofing a separate bracket for cable supports can be used to assemble the support and to secure the conductor see section supports, table pg. 0 Material: metal base combined with universal conductor holder recommended conductor diameter: Ø 8 0mm Separate support - PV FeZn 00x00 PV 2 adhesive steel/bolt M8 ine support on flat roofs steel for gluing or gluing with PVC patch on flat roofs PVC patch is not part of the support supply - its use must be consulted with the supplier of roofing the conductor is fastened with a steel strap with a bolt M Material: all-metal recommended conductor diameter: Ø 8 0mm 00x00 PV 2 adhesive Steel/bolt M8 PV 2 adhesive Steel/bolt M FeZn FeZn PV 22 straight, twisted Roof support for fixing the light conductor on tiled and eternit roofs recommended conductor diameter: Ø 8 0mm straight twisted PV 22 straight FeZn stainless steel V2A PV 22 twisted FeZn stainless steel V2A 00 7

13 SUPPORTS PV 22 upper Roof support for fixing the light conductor on shingled, tiled and eternit roofs recommended conductor diameter: Ø 8 0mm dimensions 90 (290) Separate support type PV 22 - upper M8 (external) plastic stainless steel PV 22 upper -90 PV 22 upper FeZn stainless steel V2A FeZn stainless steel V2A a separate bracket for cable supports can be used to assemble the support and to secure the conductor see section Supports, table pg M8 (inner) M8 (inner) Separate support type PV 22 - upper FeZn nerez V2A PV 22 - upper - with sealing rubber - without sealing rubber bolt M6 stainless steel rubber EPDM 30 ine support of roofing for fixing the conductor, especially on sheet metal roofs with doublesided sealing of the joint Material: galvanized steel (support) rubber EPDM with UV resistance, bolt M6 stainless steel recommended conductor diameter: Ø 8 0mm PV 22 upper with sealing rubber PV 22 upper with sealing rubber PV 22 upper without sealing rubber PV 22 upper without sealing rubber separate sealing rubber dimensions FeZn stainless steel V2A FeZn stainless steel V2A FeZn stainless steel V2A FeZn stainless steel V2A PV 22 upper (with Al strip for shaped lock) ine support under the roof for fixing the conductor on tiled roofs with shaped locks recommended conductor diameter: Ø 8 0mm Al strip 30x mm shaped lock Dimension (according to shape lock) dimensions PV 22 upper with Al 00 PV 22 upper with Al FeZn stainless steel V2A FeZn stainless steel V2A 00 It is supplemented with a thin aluminum strip into which the shape of the lock of the roofing can be created by simply pushing without further fixing the anchor nails into the laths. Universal use without the effort of pre-molding the lock.

14 SUPPORTS PV 22 upper with shaped locks ine support under roofing with shaped lock for securing the conductor wire on tiled roofs with shape locks for individual types of tiles recommended conductor diameter for all types of supports: Ø 8 0mm type of tiles Tondach lock number tile type SAMBA related type of tile SUM RUMBA FeZn stainless steel V2A 2 HRANICE FeZn stainless steel V2A 3 FRANCOUZSKÁ FeZn stainless steel V2A 4 ROMÁNSKÁ 2 CARMEN VENUS FeZn stainless steel V2A 5 FACOVKA SRDCOVKA ANDACH, TANGO, ACTUA, JUPITER, MUDE, BOERO FeZn stainless steel V2A 6 BRNĚNKA 4 FIGARO FeZn stainless steel V2A 7 FRANCOUZSKÁ 4 (short) CSARDAS ANDACH FeZn stainless steel V2A Dimension (according to shape lock) 8 BOBROVKA STEINBRUCK, TWIST, BRAVURA, DR. BOBROVKA FeZn stainless steel V2A 9 JIRČANKA 3 UNIVERZA 2 POKA FeZn stainless steel V2A 0 STODO 2 (adjustable) FeZn stainless steel V2A FIGÁRO DEUXE FeZn stainless steel V2A Type of tiles Röben 2 FIGÁRO - 2 MONZA PUS FeZn stainless steel V2A FeZn stainless steel V2A 22 BERGÁMO FeZn stainless steel V2A Type of tiles Creaton 24 PIEMONT - 3 RAPIDO FeZn stainless steel V2A FeZn stainless steel V2A PV 23 straight PV 24 PV 23 twisted Roof support for sheet metal roofs for fixing the conductor on metal roofs recommended conductor diameter: Ø 8 0mm dimension PV FeZn stainless steel V2A PV 23 twisted FeZn stainless steel V2A 75 PV FeZn stainless steel V2A 9

15 SUPPORTS PV 32 ine support for skylights and iron constructions for fixing the conductor to iron structures recommended conductor diameter: Ø 8 0mm dimension 40 PV FeZn stainless steel V2A PV 4, 42 PV 43, 44 ine support for earthing of power equipment for attaching earthing strips to masonry and iron structures dimension (mm) strip PV 4 20x FeZn PV x FeZn 60 PV x FeZn PV x FeZn PV Z Wall support for fixing conductor to wall and metall halls recommended conductor diameter: Ø 8 0mm Opening 2x Ø 7mm 60 dimension PV Z FeZn stainless steel V2A PV Z FeZn Universal conductor holder Plastic stainless steel Separate line support holder use for support types: PV5, PV22, PV2 facilitates the installation of the conductor wire by simply attaching it to a plastic holder or pressing it into a stainless steel clip recommended conductor diameter: Ø 8 0mm dimension Plastic holder M8 (inner) M8 (inner) Stainless steel clip

16 CAMPS SS 2xM8 Connection clamp 40 for the parallel connection of circular conductors recommended conductor diameter: Ø 8 0mm SS with liner 2xM8 40 SS SS with liner 20 - FeZn stainless steel V2A FeZn stainless steel V2A SO small 2xM8 Eaves clamp for connecting the circular conductor to the eaves gutters recommended conductor diameter: Ø 8 0mm 55 SO small FeZn stainless steel V2A SO big Eaves clamp 4xM8 for connecting the circular conductor to the eaves gutters recommended conductor diameter: Ø 8 0mm SO big FeZn stainless steel V2A 30 SO UNI Eaves clamp (with coach bolt) x M0 (coach bolt) for connecting the circular conductor to the eaves gutters the use of the coach bolt (x) makes it easier and quicker to install recommended conductor diameter: Ø 8 0mm SO small UNI FeZn stainless steel V2A

17 CAMPS SP 2xM8 Terminal clamp for connecting the circular conductor to the metal elements of the object 70 recommended conductor diameter: Ø 8 0mm 55 SP FeZn stainless steel V2A SP UNI Svorka připojovací (s vratovým šroubem) x M0 (coach bolt) for connecting the circular conductor to the metal elements of the object the use of the coach bolt makes it easier and quicker to install recommended conductor diameter: Ø 8 0mm SP Uni A with suspension x M0 (coach bolt) SP UNI FeZn stainless steel V2A SP Uni A with suspension FeZn stainless steel V2A SK 55 4xM8 Cross clamp for cross connections of circular conductors recommended conductor diameter: Ø 8 0mm SK with liner 65 4xM8 SK SK with liner FeZn stainless steel V2A stainless steel V4A FeZn stainless steel V2A stainless steel V4A 2

18 CAMPS SZ cast iron Stirrup 4xM Test clip for the connection of the above-ground part of the lightning conductor to ground Material: galvanized tempered cast iron brass nuts 4xM8 recommended conductor diameter: Ø 8 0mm SZ cast iron FeZn SZ UNI 2x M0 (coach bolt) 80x40 Test clamp (with coach bolt) for the connection of the above-ground part of the lightning conductor to ground the use of the coach bolt (2x) with brass nuts makes it easier and quicker to install recommended conductor diameter: Ø 8 0mm SZ UNI 2xM FeZn stainless steel 2VA SZ tubular Test clamp tubular 2xM8 Tr. Ø 8x2 for the connection of the above-ground part of the lightning conductor to ground recommended conductor diameter: Ø 8 0mm 65 SZ tubular 2xM FeZn stainless steel V2A SU UNI SU A (strip wire) 40 xm0 (coach bolt) xm0 (coach bolt) SU B SU B (wire wire) 40 xm0 (coach bolt) 45 Universal clamp for universal coupling of circular conductors in the following manner: concurrent, cross, coaxial, T-shaped and joining with flat material using the coach bolt (xm0) facilitates and speeds up assembly recommended conductor diameter: Ø 8 0mm design SU UNI SU A Strip-wire SU B Wire-wire 3 2x liner + centrepiece x liner + centrepiece 2x liners FeZn stainless steel V2A FeZn stainless steel V2A FeZn stainless steel V2A stainless steel V4A

19 CAMPS ST 0-0 Pipe clamp for connecting circular conductors to pipes of different diameters classifyingof parts: class N recommended conductor diameter: Ø 8 0mm JS ( ) dimensions D (mm) dimensions ST 0 / FeZn stainless steel V2A 2xM8 Ø D xm8 ST 02 3/ FeZn stainless steel V2A ST FeZn stainless steel V2A ST 04 / FeZn nstainless steel V2A ST 05 / FeZn stainless steel V2A ST FeZn stainless steel V2A ST 07 2 / FeZn ST FeZn ST FeZn ST FeZn ST universal xm8 Ø D Gutter pipe clamp for connecting circular conductors to gutter ducts of various diameters in a flexible stainless steel strip design that allows universal use recommended conductor diameter: Ø 8 0mm D ST universal ST universal 400 ST universal no belt Stainless steel belt for ST Uni FeZn stainless steel V2A FeZn nstainless steel V2A FeZn stainless steel V2A 2 x 0, FeZn SR xM6 Branch and connecting coupling for cross and parallel junction tapes SR xM8 SR 0 4xM6 SR 02 4xM6 SR 02 4xM8 30x4 strip 20x FeZn 30x FeZn FeZn stainless steel V2A stainless steel V2A 4

20 CAMPS SR 03 S cast iron 80 2xM8 (coach bolt) Earthing clamp for the parallel connection of the earthing belt and the circular conductor Material: hot-galvanized temperate cast iron + hot dip galvanized steel plate recommended conductor diameter: Ø 8 0mm material SR 03 S bolt/cast iron FeZn SR 03S - interliner 95 Earthing clamp for parallel connection of earthing tape and circular conductor with intermediate plate recommended conductor diameter: Ø 8 0mm material SR 03 S 2xM8/steel FeZn stainless steel V2A SR 03 K 55 Earthing clamp for cross-linking of earthing tape and circular conductor recommended conductor diameter: Ø 8 0mm material SR 03 K 4xM8/steel FeZn stainless steel V2A stainless steel V4A SR 03 S/S steel 80 4xM8 (coach bolt) Earthing clamp for the parallel connection of the earthing belt and the circular conductor recommended conductor diameter: Ø 8 0mm material SR 03 S/S 4xM8 coach bolt/steel FeZn 5

21 CAMPS SJ 0 (2xM8) 80 Clamp to lightning rod for connecting the round conductor to the lightning rod recommended conductor diameter: Ø 8 0mm Ø D SJ 0 2xM8 D FeZn stainless steel V2A SJ 0 (4xM8) 90 Clamp to lightning rod for connecting round conductor to the lightning rod recommended conductor diameter: Ø 8 0mm Ø D D SJ 0 6 4xM8 SJ 0 4xM FeZn stainless steel V2A FeZn 20 SJ 02 (2xM8) 80 Clamp to lightning rod for connecting round conductor to the lightning rod recommended conductor diameter: Ø 8 0mm D Ø D SJ 02 2xM FeZn stainless steel V2A SJ 02 (4xM8) 90 Clamp to lightning rod for connecting round conductor to the lightning rod recommended conductor diameter: Ø 8 0mm D Ø D SJ 02 4xM FeZn stainless steel V2A 20 6

22 Protective covers and angle pieces, insertion rods OS 0 upper OS 04 lower Protective cover protection of the roof at the point of attachment of the lightning rod from the leakage Z Z Z OS 0 upper Ø FeZn OS 04 lower 20x FeZn TZ Ø 0 Insertion rod 45 earth leak protection, rod diameter 8mm, protects ground-to-air transition and better resists mechanical damage TZ, FeZn TZ FeZn Ø 8 OÚ Protective angle piece earth conductor earth protection from mechanical damage D OÚ, x30x x30x x30x FeZn FeZn stainless steel V2A OÚ x30x x30x FeZn 20 - FeZn DuD spike DuZ Holder of the protective angle into the masonry attaching protective angle to protected object DuD spike FeZn DuZ (-) DuZ (-240) FeZn stainless steel V2A FeZn 30 7

23 HODERS DuD twist Holder of the protective angle to the masonry and wood attaching protective angle to the protected object by means of screws M6, M8 and dowels P extended types of holders according to the requirements for DuD twist FeZn DuD twist FeZn stainless steel V2A DuD twist FeZn DuD twist 8 DuD twist 8 P DuD twist 8 PP FeZn FeZn stainless steel V2A FeZn 30 DuD Uni + twist/bolt M8 Protective angle holder into masonry universal attaching protective angle to the protected object using a combined twist/bolt M8 and dowels 25 M8 (inner) Twist/bolt M8 x DuD UNI FeZn Combined twist/bolt M8 M8 Twist/bolt M FeZn Twist/bolt M FeZn Twist/bolt M FeZn Note: other length of the screw can be prepared according to the individual requirements for facade insulation DuD sheet metal Protective angle holder into sheet metal attaching protective angle to sheet metal by means of self-drilling screw DuD sheet metal 65 (-65) DuD sheet metal (-00) FeZn stainless steel V2A FeZn 8

24 HODERS, PROTECTING TUBES OT Protecting tube earth conductor earth protection from mechanical damage dimensions OT, FeZn stainless steel V2A DoT spike DoT twist Protective tube holder and air terminal holder attaching protective tube and air terminals to protected object dimensions DoT pike DoT Twist 8/ FeZn FeZn stainless steel V2A 30 DoT twist Protective tube holder and collector into wood attaching protective tube and air terminals to protected object by means of twist M8 and dowels dimensions DoT twist 8/00 DoT twist 8/60 DoT twist 8/200 DoT twist 8/ FeZn FeZn stainless steel V2A FeZn FeZn 30 DoT twist 8/ FeZn 30 DoT twist 8/ FeZn 30 DOT Uni + twist/bolt M8 Protective tube holder and air terminal universal attaching protective tube and air terminals to protected object by means of combined twist/bolt M8 and dowels 30 dimensions M8 (nner) DOT UNI FeZn Twist/bolt M FeZn M8 Twist/bolt M FeZn Twist/bolt M FeZn Note: other length of the twist can be prepared according to the individual requirements for facade insulatio 9

25 IGHTNING RODS, PEDESTAS JP thread M6 diam. 6mm diam. 8mm ightning rods (with thread M6) into concrete pedestal a passive receiving device located over a protected object to convey el. discharges dimensions diam. D (6 mm) diam. D (8 mm) JP 0/M FeZn AlMgSi FeZn AlMgSi JP 5/M FeZn AlMgSi FeZn AlMgSi JP 20/M FeZn AlMgSi FeZn AlMgSi JP 30/M FeZn AlMgSi FeZn AlMgSi M6 ØD JP 40/M JP /M FeZn AlMgSi FeZn AlMgSi FeZn AlMgSi FeZn AlMgSi JP 60/M FeZn AlMgSi FeZn AlMgSi Type of termination - thread M6 into concrete pedestal JP thread M6 diam. 6/0mm diam. 8/0mm Ø 0 ightning rods (with thread M6) and necking to 0mm/000mm into concrete pedestal 000 a passive receiving device located over protected object to convey el. discharge dimensions diam. D (6 mm) diam. D (8 mm) JP 5/M AlMgSi AlMgSi JP 20/M AlMgSi AlMgSi JP 30/M AlMgSi AlMgSi JP 40/M AlMgSi AlMgSi JP /M AlMgSi AlMgSi M6 ØD Type of termination thread M6 into concrete pedestal - the transverse joint ØD 6/0 is provided with a solid molding - the transverse joint ØD 8/0 is provided with a solid molding Concrete pedestal (for JP/M6) thread M6 Concrete pedestal (with thread M6 for lightning rod) including washer PVC to attach lightning rods to flat roofs Material: UV resistant plastic with concrete filler Ø 3 Indication weight (kg) Pedestal PVC/M FeZn Pedestal Concrete/M FeZn 20

26 IGHTNING RODS, PEDESTAS JP straight diam. 6mm diam. 8mm ØD -Type of termination: straight without complement ightning rods (with straight end) a passive receiving device located over protected object to convey el. discharge dimensions JP JP 5 0 JP JP JP JP 00 JP diam. D (6 mm) FeZn AlMgSi stainless steel V2A FeZn AlMgSi stainless steel V2A FeZn AlMgSi stainless steel V2A FeZn AlMgSi stainless steel V2A FeZn AlMgSi FeZn AlMgSi FeZn AlMgSi diam. D (8 mm) FeZn AlMgSi FeZn AlMgSi FeZn AlMgSi FeZn AlMgSi FeZn AlMgSi FeZn AlMgSi FeZn AlMgSi JP straight diam. 6/0mm diam. 8/8mm Ø ightning rods (with straight end) and necking to 0mm/000mm a passive receiving device located over protected object to convey el. discharge ØD Concrete pedestal (for JP/adjustable joint) Adjustable joint (SJ0 + SUB) Ø 3 dimensions diam. D (6 mm) diam. D (8 mm) JP AlMgSi AlMgSi JP AlMgSi AlMgSi JP AlMgSi AlMgSi JP AlMgSi AlMgSi JP AlMgSi AlMgSi - transition junction Ø 6/0 is implemented with solid molding - transition junction Ø 8/0 is implemented with solid molding Concrete pedestal (with adjustable joint for lightning rod with straight end) including PVC washer to attach lightning rods to flat roofs adjustable joint allows the trap to be adjusted to the vertical position relative to the pitch of the roof Material: UV resistant plastic with concrete filler Indication weight (kg) Pedestal PVC/adjustable joint FeZn Pedestal Concrete/adjustable joint FeZn 2

27 HODERS DJ upper/pv5 Holder of the lightning rod on the roof ridge with supports PV to attach lightning rods on the roof ridge in combination with supports PV5 90 DJ upper PV FeZn Note the components of the delivery are not PV 5 supports and lightning rod - it must be ed separately the design of the holder is modified for mounting on all types PV DJ 4H upper ightning rod holder to attach lightning rods on the roof DJ 4D lower dimensions DJ4H upper FeZn DJ4D lower FeZn 22

28 STANDS Stand for JP (small/3) Stand for lightning rod with straight end small 3 SJ 0 + SUB to attach lightning rod on flat roofs with the support span cca 3mm Material: Steel construction on plastic/concrete supports Advantages: also suitable for slightly sloping roofs where the verticality of the lightning rod can be adjusted by movable joint and adjusting screws on the supports SUB clamp allows the snap-in connector to be attached to the overall lightning protection system Recommendations for lengths of air terminals: up to,5m for steel up to 2m for AlMgSi Packaging: separate steel frame + supports kg (3pcs) Weight: cca 5kg (including supports) span (mm) Stand for JP (small/3) Stand for JP (big/700) Stand for lightning rod with straight end big to attach lightning rod on flat roofs with the support span cca 700mm Material: Steel construction on plastic/concrete supports Advantages: also suitable for slightly sloping roofs where the verticality of the lightning rod can be adjusted by the movable joint and the adjusting screws on the supports 700 Recommendations for lengths of air terminals: up to 3m for steel - up to 4m for AlMgSi Packaging: separate steel frame + supports 2kg (3pcs) Weight: cca 40kg (including supports) span (mm) Stand for JP (big/700)

29 TEESCOPIC COECTOR Telescopic collector Telescopic collectors JTK Tubes AlMgSi Bar Ø6 AlMgSi V telescopic collectors are mainly used for straight (pent) and flat roofs and are used to protect all metallic elements on such roofs such as chimneys, exhausts, air conditioning, antennas, cooling units and all other technological equipment furthermore when used in assemblies, it may also form a separate collecting system, e.g., for all cases of protection of the building by the method of rolling a ball according to ČSN EN Material: own collector: - tube alloy AlMgSi - rod Ø6mm alloy AlMGSi stand: - steel, FeZn pedestal: - vibrated concrete + PVC washers connecting accessories: - steel, FeZn Construction: ST04 ~ 400 the collector itself is made of Al pipes (alloy AlMgSi) which fit together and cross section according to ČSN EN for the construction of collectors the composition of individual parts is dependent on the required collector height in the range of 5m to 0m. Individual lengths are fixed to each other by M8 screws the collector itself is anchored to a steel triangular base that is fixed by means of adjustable screws on concrete bases weighing (2, 20) kg which ensure the stability of the whole set the concrete pedestals are equipped with PVC pads against damage of the roofing and their number on the arm is vertical to the collector height (see table) the stability of the collector is supported by cable rods with tensioning screws M6 lightning conductor is connected to the collector via the ST04 clamp at the bottom of the stand type designation ( ) Table of standard collector assemblies: 5m 0m (non-standard heights and heights over 0 m must be discussed individually) lenghts of the parts of collector assembly (m) tube tube tube bar Ø 40x4 Ø 32x3,5 Ø 25x5 Ø 6/0 recommended number of concrete supports on the shoulder (kg) weight of the set cca (kg) recommended height of the pull-out bars (mm) JTK (30 229) 2 /0 3x JTK 60 (30 298) 3 /0 3x JTK 70 (30 28) 3 / 3x JTK 80 (30 274) 4 / 3x JTK 90 (30 267) 4 2 / 3x JTK 00 (30 2) / 3x

30 EARTH CONDUCTORS ZT (tubular) Stopper Spike Earth conductors (tubular) for switching el. discharges into the conductive layers of the earth dimension dimension cross section (mm) ZT 000 tube Ø 28x FeZn ZT,5 0 tube Ø 28x FeZn ZT tube Ø 28x FeZn ZT (full) ZTP + SR03K Earth conductors (tubular full) for switching el. discharges into the conductive layers of the earth SR03K dimension dimension cross section (mm) ZTP 000 bar Ø FeZn ZTP,5 0 bar Ø FeZn ZTP bar Ø FeZn ZTP + SR03K 000 bar Ø FeZn ZTP,5+ SR03K 0 bar Ø FeZn ZTP 2+ SR03K 2000 bar Ø FeZn ZTT+SR03K SR03K Earth conductors T profile with clamp SR03K for switching el. discharges into the conductive layers of the earth, greater contact surface than a circular bar of the same length the connection clamp allows continuous and perpendicular connection of the conductor tape dimension dimension cross section (mm) ZTT + SR03K 000 T-profil 30x30x4 ZTT,5 + SR03K 0 T-profil 30x30x4 ZTT 2+ SR03K 2000 T-profil 30x30x FeZn FeZn FeZn ZTX+SR03K SR03K Earth conductors (cross profile with clamp SR03K) for switching el. discharges into the conductive layers of the earth reduces the earthing resistance value within the size of the contact area compared to the standard circular bars or bars of the T profile the connection clamp allows continuous and perpendicular connection of the conductor tape dimension dimension cross section (mm) ZTX + SR03K 000 X-profil xx3 ZTX,5 + SR03K 0 X-profil xx3 ZTX 2+ SR03K 2000 X-profil xx FeZn FeZn FeZn 25

31 Earth conductors + other accessories ZD 0 + SR03K SR03K Earthing belt (with clamp SR03k) for switching el. discharges into the conductive layers of the earth the connection clamp allows the connection of the earthing strip 30x4mm and conductor Ø 8, 0mm A B dimension AxB (mm) ZD 0 + SR03K 2000x FeZn ZD 02 + SR03K SR03K Earthing plate (with clamp SR03K) for switching el. discharges into the conductive layers of the earth the connection clamp allows the connection of the earthing strip 30x4mm and conductor Ø 8, 0mm A B dimension AxB (mm) ZD 02 + SR03K 0x FeZn ZD 02 + SR03K 000x FeZn Petroleum tape, Superflex Protection of the connections stored in the ground Petroleum bands are anticorrosive material exhibiting outstanding properties throughout the service life of the grounded installatio on one joint use about 0 ANTICOR Plastic petroleum strip (width 30mm and length 0m). Band the branch first (approx. 20cm), then wind up the strip (approx. 80cm straps) so that the bolts are perfectly insulated we wrap the ANTICOR 202 PVC tape in the same way and create sufficient mechanical protection dimension (mm) in carton Petroleum tape ANTICOR Plast x Superflex ANTICOR x PVC labels, stainless steel ID label for earthing and ground marking numbers 0 9 graphic symbols stainless steel PVC stainless steel PVC ead Pb Rolled lead for the transition of copper wire to steel dimension (mm) in carton lead Pb 60x0, FeZn 26

32 OTHER ACCESSORIES Earthing tape Earthing tape FeZn, stainless steel for making tape ground electrode tape coil dimension (mm) coils (kg/m) tape FeZn 30x ~ 25/25 tape FeZn 20x3 275 ~ 25/52 tape FeZn 30x3,5 274 ~ /60 Wire eakage earth wire FeZn, AlMgSi, stainless steel, Cu wire coil wire FeZn Ø 8 diameter D (mm) wire FeZn Ø 0 wire AlMgSi Ø FeZn FeZn FeZn FeZn FeZN FeZn soft soft semi-hard semi-hard coils (kg/m) ~ /25 ~ 20/ ~ 0/25 ~ /80 ~ 20/30 ~ 0/5 ~ 20/ ~ 6,7/ ~ 20/ ~ 6,7/ ~ /25 ~ /80 wire stainless Ø stainless steel V2V steel Ø stainless steel V4A wire - Cu Ø Cu ~ / Wire AlMgSi/PVC eakage wire AlMgSi/PVC (diam. 8mm/diam. mm) conductor for the installation of conductors, especially for the so called hidden leads halogen-free PVC sheathing PVC color creamy white wire coil Wire 8, AlMgSi/PVC diameter D (mm) coils (kg/m) Ø 8/ AlMgSi/PVC ~ 20/00 Wire rope High-conductivity strands FeZn conductor for installation of lightning conductors and other electrical equipment. Stronghold: 540 mpa rope coil diameter D (mm) coils (kg/m) Rope 25 +6x2, FeZn ~ 205 Rope 35 +6x2, FeZn ~ 205 Rope 7x FeZn ~ 205() Rope x2, FeZn ~ 205 Rope 95 9x2, FeZn ~ 205 Rope 20 9x2, FeZn ~

33 OTHER ACCESSORIES SONAP clamps Cable clamps SONAP for attaching conductors to steel constructions dimension cable from (mm) to (mm) SONAP / SONAP 4/ SONAP 28/ SONAP 40/ SONAP 54/ SONAP 74/ Current terminals Universal clamps current for the connection of cables and wires rope diameter (mm) main branch 0 2xM xM xM xM xM xM Rope clamps S Rope clamps to form clamping ropes and wires dimension (mm) rope stirrup S 3 3 M4 20 S 5 5 M5 227 S 6 6 M5 234 S 8 8 M6 24 S 0 0 M8 258 S M8 265 S 3 3 M0 272 S 4 4 M0 289 S 9 9 M 296 S M4 22 Tension bolts NS Tension bolts for connecting and tensioning steel ropes dimension (mm) bolt length NS 5 M5 / NS 6 M6 70/ NS 8 M8 0/ NS 0 M NS 2 M2 / NS 4 M NS 6 M

34 REMOTE IGHTNING RODS Insulating rod (IZT) Separate insulating rod plastic insulating rod for the preparation of various lengths of insulated brackets Material: plastic GFK, diameter 6mm design insulated length GFK IZT Insulating rod for conductor (IZT-V) Insulating rod for cable attachmnent (with metal head) for conducting the conductor (diam. 8,0mm) at a prescribed distance from the metal parts and the technological system of the protected object design insulated length GFK IZT - V 430 IZT - V 680 IZT - V Insulating rod for air terminal (IZT-J) Insulating rod for air terminal attachment (with metal head) for fixing the collecting rod at a prescribed distance from the metal components and the technological systems of the protected object design insulated length GFK IZT - J 430 IZT - J 680 IZT - J Insulating rod with concrete weight (IZT V, concrete) Support of the insulating rod for the cable grip in combination with the concrete weights for conducting the conductor wire at a prescribed distance from metal components and technological systems on flat roofs design IZT V/concrete 00x00 IZT V/concrete 200x200 insulated length weight (kg) 00-2, , Note: the insulated length for the ranges can be adjusted as needed 00x00 200x200 29

35 REMOTE IGHTNING RODS Holder D-OH (straight) The holder of the remote lightning conductor into walling for fixing the insulating rod perpendicularly to the wall of the building D-OH straight FeZn Holder D-OH (angular) Holder to the remote lightning rod into walling angular for fixing the insulating rod to the corner of the object D-OH angular FeZn Holder D-OH (with twist) Holder to the remote lightning rod to the wall with twist for fixing the insulating rod with anchors to the wall and wood D-OH with twist FeZn Holder D-OH (jointed) Holder to the remote lightning rod for strut IZT jointed for the inclined attachment of the strut between the insulating rods D-OH jointed FeZn Holder D-OH (angular) Holder of the remote lightning rod for the wall angular for fixing the insulating rod to the corner of the object perpendicularly or concurrently D-OH angular FeZn 30

36 REMOTE IGHTNING RODS Holder D-OH ST UNI (stainless steel tape) Holder of the remote lightning rod on the pipe stainless steel tape Ø D for attaching lightning rod to pipe or pole in flexible stainless steel strip design that allows universal use dimension D (mm) D-OH ST UNI FeZn Holder D-OH ST 0-09 Holder of the remote lightning rod on the pipe Ø D for attaching lightning rod to the pipe according to different diameters dimension D (mm) D-OH ST FeZn D-OH ST FeZn D-OH ST FeZn D-OH ST FeZn D-OH ST FeZn D-OH ST FeZn D-OH ST FeZn D-OH ST FeZn D-OH ST FeZn The assortment of holders will be continuously refilled according to the needs and methods of anchoring the insulating bars to the protected objects. 3

37 ASSEMBY INSTRUCTIONS Assembly instructions ightning conductors are used to create a system of lightning protection (PS) and are suitable for all types of construction and earthing of electrotechnical devices. Classifying parts depending on the ability to withstand lightning current (clamps) - class N for normal stress by function - use above ground or storage in the ground (concrete) Material composition hot galvanized steel: - basic material design steel class (S 235 JR) - grey cast iron alluminium: - EN AW 6060 (AlMgSi 0,5), F22 semi-hard stainless steel: - stainless steel V2A (.430) and V4A (.440) non-metallic: - plastic stabilized against UV radiation, vibrated concrete, plastic GFK In the case of a material combination this is further specified in the relevant item in the catalog. Construction of lightning conductors The individual components are mounted with conventional mounting tools as detachable joints, the self-fastening of the conductor inside the component is via the threadless steel insert or the universal guide holders. Recommended maximum tightening torques for connecting material when mounting light conductors: (connecting material with standard strength: 4.6 and 5.8) FeZn AlMgSi stainless steel - joints for hexagon bolts and nuts size M6 3,7 Nm 2,5 Nm 3,7 Nm - joints for hexagon bolts and nuts size M8 9,0 Nm 4,0 Nm 9,0 Nm - joints for coach bolts and nuts size M0 8,0 Nm 4,0 Nm 8,0 Nm - joints using stirrups and nuts size M8 9,0 Nm 4,0 Nm - Conductors for the construction of lightning conductors Complete overview for all materials see ČSN EN dimension profile (min) for air-termination network for earth electrodes lightning rods and down-lead steel wire galvanized Ø 8 mm (down-lead) Ø 6 mm (lightning rods) Ø 0 mm steel rope galvanized mm² 70 mm² steel tape galvanized - 60 mm² 90 mm² copper wire copper rope Ø 8 mm (down-lead) Ø 6 mm (lightning rods) mm² (Ø 8 mm) (can be tin plated) - 60 mm² mm² (can be tin plated) Recommended methods of conductor assembly (use) are specified separately for each relevant part in the catalog documentatio Resistance to mechanical effects (for supports) is: - side load 200 N - for longitudinal moving load N Compliance with the specified component requirements according to the Installation Instructions is carried out in the framework of the installation and regular inspections. 32

38 TECHNICA PART Technical part Table of weight and length conversion of conductors. dimensions weigh m (kg) lenght kg (m) FeZn wire diam 8 mm 0,400 2, FeZn wire diam 0 mm 0,620,62 FeZn rope profile 25 mm² 0,230 4,42 FeZn rope profile 35 mm² 0,280 3,57 FeZn rope profile mm² 0,400 2, FeZn rope profile 70mm² 0,620,62 FeZn rope profile 95 mm² 0,770,33 FeZn rope profile 20 mm² 0,960,04 FeZn tape 20x3 mm 0,480 2,08 FeZn tape 30x4 mm 0,9,05 Stainless steel wire diam 8 mm 0,400 2, Stainless steel wire diam 0 mm 0,620,62 Stainless steel tape 30x3,5 mm 0,820,22 Cu wire diam 7 mm 0,3 2,86 Cu wire diam 8 mm 0,4 2,22 AlMgSi wire diam 8 mm 0,35 7,40 AlMgSi/PVC wire diam 8/ mm 0,200 5,00 ead Pb coil 60x0,5 mm 0,4 (bm) 2,44 (bm) Note: strength of steel ropes: 540 MPa Table of combinations of joints of different materials in the construction of conductors in terms of the risk of corrosion Note: if necessary to combine two different materials that are mutually inappropriate, bimetallic couplings must be used. material steel FeZn (hot dip galvanized) alluminium (alloy AlMgSi) steel FeZn (hot dip galvanized) suitable possible connection alluminium (alloy AlMgSi) possible connection suitable copper (Cu) unsuitable unsuitable copper (Cu) unsuitable unsuitable suitable steel stainless steel possible connection possible connection possible connection steel stainless steel possible connection possible connection possible connection suitable OVERVIEW OF VAID STANDARDS ČSN EN ČSN EN ČSN EN ČSN EN ČSN EN ČSN EN ČSN EN ČSN ČSN EN ISO 46 ightning protection part - Part : Requirements for connecting components ightning protection part part 2: Requirements for wires and earthing ightning protection part part 4: Requirements for connector supports Protection from lightning and overvoltage part : General principles Protection from lightning and overvoltage part 2: Risk management Protection from lightning and overvoltage part 3: Material damage to buildings and the danger of life Protection from lightning and overvoltage part 4: Electric and electronic systems in buildings Elektrical equipment part 5: Selection and construction of el. equipment, earthing and protective conductors Zinc coated hot dip coatings for steel and cast iron products 33

39 What we produce and sell Components for lightning conductors and earthing complete assortment of conductors in the design FeZN, AlMgSi, stainless steel (supports, clamps, holders, collecting and earthing rods, earthing plates, protective angles and pipes and other accessories) lightning conductor 8, 0mm, FeZn, Cu, AlMgSi, AlMgSi/PVC, stainless steel high-conductivity strands FeZn earthing tape in dimensions 30x4mm (FeZn), 30x3,5 (stainless steel) cable clips SONAP rope clamps and tensioning screws universal current clamps other connecting and mounting material air terminals AlMgSi telescopic masts AlMgSi remote lightning conductors, insulating bars

40 Hradec Králové Opava Radkov Ostrava CONTACT ADDRESS: KOVOBESK KPS OPAVA s.r.o Radkov 5 IČO: Tel./fax: kovoblesk@kovoblesk.cz SAES DEPARTMENT: mobil: mobil: starecek@kovoblesk.cz SHIPPING DEPARTMENT, WAREHOUSE: tel./fax: mobil: sklad@kovoblesk.cz