ASSEMBLY INSTRUCTIONS FOR 14 x 14 SONOMA ARCHED TOP PERGOLA : OPTIONAL SIDEWALL WINDOW LATCHES Wall Panel Batten Strip Top Cap For Wall Base Beam For

Size: px

Start display at page:

Download "ASSEMBLY INSTRUCTIONS FOR 14 x 14 SONOMA ARCHED TOP PERGOLA : OPTIONAL SIDEWALL WINDOW LATCHES Wall Panel Batten Strip Top Cap For Wall Base Beam For"

Marcus Briggs
5 years ago
Views:

1 ASSEMBLY INSTRUCTIONS FOR 14 x 14 SONOMA ARCHED TOP PERGOLA : OPTIONAL SIDEWALL WINDOW LATCHES Wall Panel Batten Strip Top Cap For Wall Base Beam For Wall Size: mm Size: mm 4 Panel Wall with Open Window Size: mm Wall Beam Support Size: mm Screw Bracket X8 Size: mm Screw Size: 0.2 x x 90mm Screw X4 Size: 0.2 x x 55mm X 52 Size: 0.16 x x 30mm 1 of 4

2 ASSEMBLY INSTRUCTIONS FOR 14 x 14 SONOMA ARCHED TOP PERGOLA : OPTIONAL LATTICE WALL PANEL Attach L Brackets F to each end of lower wall support beam B Mount center support L to beam B. Screw beam to posts. Make sure beam is level abd posts are SQUARE UP 2 of 3

3 ASSEMBLY INSTRUCTIONS FOR 14 x 14 SONOMA ARCHED TOP PERGOLA : OPTIONAL LATTICE WALL PANEL Lattice Wall Panel Size: mm Batten Strip Size: mm 4 Panel Lattice Wall Base Beam For Wall Top Cap For Wall Size: mm Size: mm Wall Beam Support Bracket Size: mm Screw Screw Screw X8 Size: 0.2 x x 90mm X4 Size: 0.2 x x 55mm X 52 Size: 0.16 x x 30mm 1 of 3

4 ASSEMBLY INSTRUCTIONS FOR 14 x 14 SONOMA ARCHED TOP PERGOLA : OPTIONAL LATTICE ROOF PANELS A Lattice Panel Size: 36 x x 995mm x 16 Drop lattice roof panels into place on upper beam assembly. Can secure with additional wood screws in high wind area. A 1of 1

5 ASSEMBLY INSTRUCTIONS FOR 14 x 14 SONOMA ARCHED TOP PERGOLA Carefully position posts in final location. Check for squareness. Install outer arch assembles and attach corner braces G. Then install inside arches. 5 of 5

6 ASSEMBLY INSTRUCTIONS FOR 14 x 14 SONOMA ARCHED TOP PERGOLA Lay posts on level surface. Bolt crossbeam D to posts as shown. Repeat for remaining two post. Screw corner into place as shown. Screw decoractive brackets in place on posts. Repeat procedure for other set of posts. 4 of 5

7 ASSEMBLY INSTRUCTIONS FOR 14 x 14 SONOMA ARCHED TOP PERGOLA Bolt steel footplate to each of four posts Assemble left and right half of arched beams, joining with brackets M and N

8 ASSEMBLY INSTRUCTIONS FOR 14 x 14 SONOMA ARCHED TOP PERGOLA : Part List Post Tall Corbel Post Brace Short Corbel Post Brace Size: mm Size: mm Size: mm Outer Right Side Upper Beam Outer Left Side Upper Beam Long Beam Post Plate Size: 8 200mm 5 Size: mm 5 Interrior Upper Beam X8 Size: 0.4 x x 160mm Size: mm Right Side Exterrior Arch Size: mm Left Side Exterior Arch Size: mm Interrior Arch X 42 X16 Size: 0.4 x x 55mm X30 X16 Size: 0.2 x 3 5 x 75mm Size: mm Size: mm Size: mm Size: 0.2 x x 90mm X 158 Size: 0.2 x x 55mm Size: 0.16 x x 30mm 2 of 5

9 From ground to lower edge of Horizontal beam Total Height ASSEMBLY INSTRUCTIONS FOR 14 x 14 SONOMA ARCHED TOP PERGOLA NOTE : View of Complete 14 x 14 Basic Unit Post to Post Inside Dimension -- All Four Side -- Center to center Post Dimension -- All Four Side -- 1 of 5

ASSEMBLY INSTRUCTIONS FOR 14 x 14 SONOMA ARCHED TOP PERGOLA : OPTIONAL SIDEWALL WINDOW LATCHES Add eyebolt and metal amr/ hook to allow shutter windows to be fixed in

10 ASSEMBLY INSTRUCTIONS FOR 14 x 14 SONOMA ARCHED TOP PERGOLA : OPTIONAL SIDEWALL WINDOW LATCHES Add eyebolt and metal amr/ hook to allow shutter windows to be fixed in open position After assembly and final check for Squareness, anchor posts through mounting holes in post base plates. Use lag bolts to secure to cement surface. 4 of 4

11 ASSEMBLY INSTRUCTIONS FOR 14 x 14 SONOMA ARCHED TOP PERGOLA : OPTIONAL SIDEWALL WINDOW LATCHES Position wall panels in slot on lower beam. Use L brackets to attach outer wall panels to posts. Hold inner two panels in position and drop top cap G into place ti align panels. Screw into place. Position 3 batten strips B to cover wall panel seams. Can be mounted either side, customer preference. Screw into place. 3 of 4

ASSEMBLY INSTRUCTIONS FOR 14 x 14 SONOMA ARCHED TOP PERGOLA : OPTIONAL LATTICE WALL PANEL Position wall panels in slot on lower beam. Use L brackets to attach outer wall panels to posts.

12 ASSEMBLY INSTRUCTIONS FOR 14 x 14 SONOMA ARCHED TOP PERGOLA : OPTIONAL LATTICE WALL PANEL Position wall panels in slot on lower beam. Use L brackets to attach outer wall panels to posts. Hold inner two panels in position and drop top cap G into place ti align panels. Screw into place. Position 3 batten strips B to cover wall panel seams. Can be mounted either side, customer preference. Screw into place. 3 of 3

13 ASSEMBLY INSTRUCTIONS FOR 14 x 14 SONOMA ARCHED TOP PERGOLA : OPTIONAL SIDEWALL WINDOW LATCHES Attach L Brackets F to each end of lower wall support beam B Mount center support L to beam B. Screw beam to posts. Make sure beam is level abd posts are SQUARE UP 2 of 4

(TOLL FREE); 7am 7pm Pacific Time, Monday-Saturday ASSEMBLY INSTRUCTIONS FOR THE ATTACHED ARCHED PERGOLA KITS WITH WALL MOUNTED ANCHORS

866.332.203 (TOLL FREE); 7am 7pm Pacific Time, Monday-Saturday ASSEMBLY INSTRUCTIONS FOR THE ATTACHED ARCHED PERGOLA KITS WITH WALL MOUNTED ANCHORS Qty. 2 2 Quantity will vary. Quantity will vary. Quantity