ES2. fully integrated screening system for bifold doors. load balancing technology. tough PVC-coated polyester mesh.

Size: px

Start display at page:

Download "ES2. fully integrated screening system for bifold doors. load balancing technology. tough PVC-coated polyester mesh."

Shon Merritt
5 years ago
Views:

1 ES2 fully integrated screening system for bifold doors load balancing technology tough PVC-coated polyester mesh tight technology

ES2 BIFOLD DOOR SCREENING SYSTEM ES2: DOOR SCREENING SYSTEM BIFOLDING HARDWARE SYSTEM WITH INTEGRATED INSECT DOOR SCREEN ES2 SPECIFICATIONS max panel weight 40kg max panel width 1000mm max frame

2 ES2 BIFOLD DOOR SCREENING SYSTEM ES2: DOOR SCREENING SYSTEM BIFOLDING HARDWARE SYSTEM WITH INTEGRATED INSECT DOOR SCREEN ES2 SPECIFICATIONS max panel weight 40kg max panel width 1000mm max frame sizes: double screen 2400mm(H) x 5800mm(W) single screen 2400mm(H) x 3000mm(W) door thickness 38-40mm Putting an end to the compromises between uninterrupted views and unrestricted movement and the need to eliminate unpleasant flying pests Centor ES2 continues the evolution of the redoubtable E2 bifold system. Including a world-first fully integrated insect screening solution for bi-fold scale openings ES2-based doors are ready for action as soon as temperatures allow. The rest of the year the screen system can be rolled back out of view, with hardware integrated into the architecture of the door frame itself. Built Tough and Tested Centor s designers have catered for anything that modern life might throw at this sturdy product. Materials ES2 is manufactured entirely in stainless steel, brass and reinforced engineering polymers. Tough PVC-coated polyester mesh used in the screen, is hardwearing and resistant to damage from pets. The mesh is easy to clean and can be replaced. Testing The screen system has undergone cyclic testing to 50,000 operations in a laboratory and been extensively exposed to dust, mud, sand and corrosive atmosphere. It has stood up to impact testing with a 17kg punching bag 100 times, wind testing to 20kph and considerable pushing, poking and prodding to simulate real life usage. With ES2 Centor s commitment to research and development has oncde again produced a product as advanced as it is functional; the world s first fully-integrated screening system for bifold-scale openings. High Performance System Once again Centor s commitment to research and development has produced a product as advanced as it is functional. Features built into ES2 s screen system include: Load Balancing Technology Load Balancing Technology (LBT ) (patent pending) allows for the sort of effortless fingertip control synonymous with Centor products, with no crude spring-loading to fight against. The screen s lead-stile remains balanced in any chosen position until further pressure is applied. Load-balancing also means far greater mesh tension across the screen, eliminating any tendency for sag. Tight Technology Tight Technology manufacturing techniques ensure control of the horizontal edges of the screen so they remain straight and tight across the widest spans. SPECIFYING ES2 For detailed component selection, including calculating size and number of door panels, specifiers can utilise Doorcalc, Centor s free specification and ordering software. Doorcalc is available from Architects and Designers can feel comfortable simply specifying Centor ES2 and leaving detailed component selection to the builder, joiner or fabricator. Shock Absorption A shock absorption system allows visitors taken in by the screen s unobtrusiveness and near invisibility to walk away with no more than a surprise and no system damage. ARCHITECTURAL GRADE PERFORMANCE WITH A TEN YEAR WARRANTY Self-Feeding Mechanism Should strong winds blow the screen out of the top or bottom channels the mesh will self-feed back onto the roll as it is rolled away. p: 222

3 ES2 BIFOLD DOOR SCREENING SYSTEM

stylishly minimal ES2 puts an end to compromises between

4 ES2 BIFOLD DOOR SCREENING SYSTEM Functioning smoothly and reliably so that use of bifold doors is maximised whatever the season, the stylishly minimal ES2 puts an end to compromises between uninterrupted views, unrestricted movement and the need to eliminate insects. p: 224

5 ES2 BIFOLD DOOR SCREENING SYSTEM

ES2: ARCHITECTURAL DETAIL Downloadable DXF or DWG files ready for use in your own documentation are a convenient resource for architects and specifiers wishing

6 ES2: ARCHITECTURAL DETAIL Downloadable DXF or DWG files ready for use in your own documentation are a convenient resource for architects and specifiers wishing to use Centor systems. ES2 DXF or DWG files can be downloaded from Horizontal Profile Single screen shown Patents Pending p: 226

7 Vertical Profile Patents Pending

8 Brick Veneer Head Alternate A Flashing Head fixed with special 6mm x 75mm stainless steel tek screws Refer to E2 specification for spacing Fixing plate installed with batten screws before door is fitted p: 228

9 Brick Veneer Head Alternate B Flashing Fix with batten screws at 450mm centers; refer to E2 specifications for spacing. (140g x 75mm shown) Brad 10g x 50mm batten screws; refer to E2 specification for spacing Resilient packer as necessary Head support timber 30 x 180 x width of Head

10 Brick Veneer Head Alternate C Wall Liner Flashing Extended width header beam 125mm wide Packer Fix with batten screws at 450mm centers; refer to E2 specifications for spacing. (140g x 75mm shown) Architrave 120mm x 8mm p: 230

11 Brick Veneer Jamb Option 1 Fixing bracket riveted to jamb Brad max length 25mm Architrave 120 x 18 Packer 8mm x 30mm adhere to frame Bracket fixed to stud by #6 x 25mm countersunk tek screws at 600 centers Flashing Storm mould or sealant

12 Brick Veneer Jamb Option 2 Bracket fixed to stud by #6 x 25mm countersunk tek screws at 600 centers Fixing bracket riveted to jamb Brad max length 35mm Architrave 120 x 18 Packer 8mm x 30mm adhere to frame Flashing Trim 80 x 18 Storm mould or sealant p: 232

13 Concrete Beam Fixing Dynabolt 8mmx75mm Refer to E2 specifications for spacing Impervious coating applied to surface prior to affixing door Sealant Sealant Resilient packer at each fixing point

14 Concrete Block Jamb Detail Adhesive Packer 19 x 40 Architrave Dynabolt 6 x 125, 3 places equally spaced Sealant Brad Packing blocks fitted at anchor points Impervious coating applied to opening prior to affixing door Sealant p: 234

15 Sill Detail Brick Veneer Sealant Sealant Flashing Dynabolt 8mm x 75mm at 600mm centers 280 TYP

16 Timber Clad Head Alternate A Flashing Fix with batten screws at 450mm centers; refer to E2 specifications for spacing. (140g x 75mm shown) Moulding or Trim as required by builder to conceal flashing and fixing Brad 10g x 50mm batten screws at 450mm centers Packer Head support timber 30 x 180 x width of head Optional Architrave p: 236

Timber Clad Head Alternate B Flashing Moulding or trim as required by builder to conceal flashing and fixing Fixing plate ESHFP100 installed with #10

17 Timber Clad Head Alternate B Flashing Moulding or trim as required by builder to conceal flashing and fixing Fixing plate ESHFP100 installed with #10 x 50mm batten screws before door is fitted Packer Head fixed with 6mm x 75mm stainless steel tek screws supplied Refer to E2 specifications for spacing

18 Chamfer Board Jamb Bracket fixed to stud #6x25mm countersunk tek screws at 600 centres Fixing bracket riveted Brad to jamb Architrave 120mm x 12mm Flashing Packer 8mm x 30mm by builder adhere to frame Moulding or trim to besealed to jamb and cladding p: 238

Screens for any door or window type

Screens for any door or window type System Selection S1 Screen S2 Screen Frame height max. 10 (3200mm) min. 47-1/4 max. 124 (1200-3150mm) Frame width max. 24 (7600mm) min. 25-3/16 max. 102-3/8 (640-2600mm)