Extrusions GB-3-IN01. Updated: Scale: REV: - This Drawing is Protected by Copyright Altus NZ Ltd.
|
|
- Silvester Osborne
- 5 years ago
- Views:
Transcription
1
2
3 Extrusions Updated: N/A Scale: N.T.S REV: - Dwg Dwg Revision Rev No Description Description Date GB-3-IN01 Index Page GB Extrusions GB Extrusions GB Extrusions GB Extrusions GB Extrusions Extrusions GB-3-IN01
4
5 N/A Scale: 1:1 Extrusions REV: Cap Outer Frame Rafter COMPONENT BR508 ex Shoe Extrusions GB-3-001
6 N/A Scale: 1:1 Extrusions REV: Large Rafter Large Purlin Purlin Small Rafter NOTE: This section has a minimum purchase requirement of 150kg, approx. 55m Extrusions GB-3-002
7 N/A Scale: 1:1 Extrusions REV: - Extrusion Profiles Universal Glazing Cap Base Bead Bead Extrusions GB-3-003
8 N/A Scale: 1:1 Extrusions REV: Glazing Bar THM Mullion/Frame Finned Glazing Bar THM Mullion/Frame Extrusions GB-3-004
9 N/A Scale: 1:1 Extrusions REV: - Extrusion Profiles Iluminex Glazing Bars Glazing Bar BR515 Extrusions GB-3-005
10
11 'I'-Values Updated: N/A Scale: N.T.S REV: - Dwg Dwg Revision Rev No Description Description Date GB-4-IN01 Index Page GB 'I'-Values 'I'-Values GB-4-IN01
12
13 'I'-Values Updated: N/A Scale: N.T.S REV: - Profile Part No. Description 'I'cm 4 Wind Pressure Moment of Inertia OUTER FRAME RAFTER PURLIN LARGE RAFTER SMALL RAFTER ARCADIA BAR GLAZING BAR Thermal Glazing Bar Finned Thermal Glazing Bar 'I'-Values GB-4-001
14
15 Hardware Updated: N/A Scale: N.T.S REV: - Dwg Dwg Revision Rev No Description Description Date GB-5-IN01 Index Page GB Hardware GB Hardware GB Hardware GB Hardware GB Hardware GB Hardware Hardware GB-5-IN01
16
17 Hardware Updated: N/A Scale: N.T.S REV: - GLAZING GASKET CAP FIXING SCREW , BAR, CAP , , , BARS, CAP backing seal (Dynex 934) 3/16" BSW machine screw s/steel c/sunk slot head glazing gasket note 1 WM50090 WM , BAR, CAP glazing thickness 4-5mm 6-10mm 12-18mm length of screw * 1/2" * 1/2" 3/4" glazing gasket glazing thickness 6-10mm 12-18mm 20-24mm 25mm length of screw 1" 1 1/4" 1 1/2" 1 3/4" backing seal (E2091/S) backing seal *Available ex FAL service centre, Part No. FA78009 NOTE 1: Use backing seal in cap and backing seal in bar or vice versa GLAZING GASKET backing seal backing seal wedge wedge CAP FIXING SCREW 3/16" BSW s/steel c/sunk slot head machine screw glazing gasket WM501c/501c WM503/503 WM503/ BAR, CAP glazing thickness flashing 4mm 5mm length of screw 3/8" 3/8" 3/8" WM503/503 WM503/503 WM503/503 WM503/501c 6mm 8mm 10mm 18mm 1/2" 1/2" 1/2" 1" GLAZING BASE CAP glazing gasket glazing thickness GASKET & SCREW LENGTH TO SUIT APPLICATION ARCADIA BAR ARCADIA BEAD glazing gasket 50840/ / /50560 glazing thickness 4mm 6mm 8mm wedge Hardware GB-5-001
18 Hardware Updated: N/A Scale: N.T.S REV: - Hardware GB-5-002
19 Hardware Updated: N/A Scale: N.T.S REV: - 30 cut 50x 40x 4 Aluminium Box Section (609698) Aluminium spigot & Rafter bars Corner Gusset Sloped Glazing NZS 4223: 1985 clause states "Sloped glazing is a term applied to glazing that is sloped more than 15 degrees from the vertical" and "Grade A safety glass shall be used on all sloped and overhead glazing." It is recommended that laminated glazing be used in lieu of toughened for safety reasons. If broken the PVB interlayer will prevent disintegration and also act as a preventative barrier against penetration. However 6mm laminate should not exceed 700mm width. Screws and rivets CP72052, CP72053 end caps 3/4"x6g S/S General assembly 3/4"x8g S/S 0311 Fixing shoe Shoe fixing to bars 3/4"x10g S/S CP72050, CP72051 end caps CP72052, CP72053 end caps General assembly 1/8" Monel steel Pop-rivets 0109 Purlin stops Hardware GB-5-003
20 Hardware Updated: N/A Scale: N.T.S REV: - Stops For The 0109 Series Purlins. Purlin Stop ex colonial bar 40mm long for & rafter bars Glass Stop For purlin bar ex 3mm aluminium flat. 40mm long, height to suit glazing Non Stocked End-Caps For The 60mm Wide Sections Aluminium End Cap / small bar Non Stocked Aluminium end cap / large bar Non Stocked Hardware GB-5-004
21 Hardware Updated: N/A Scale: N.T.S REV: - End-Caps For The 60mm Wide Sections. Fixing Shoe BR508 (stocked in 5.0m only) for , bars R 4.5 Factory Fitted Fixing Shoes R 4.5 csk R 4.5 R 4.5 csk Fixing shoe - FAL ex 50 x 3mm aluminium flat for , bars Non Stocked Fixing shoe - FAL ex 50 x 3mm aluminium flat for , bars Non Stocked Hardware GB-5-005
22 Hardware Updated: N/A Scale: N.T.S REV: Nylon Fin End Cap End Caps to be 3mm thick Aluminium Fabricators to make Hardware GB-5-006
23 Cross Sections Updated: N/A Scale: N.T.S REV: - Dwg Dwg Revision Rev No Description Description Date GB-7-IN01 Index Page GB-7-C01 Elevation GB Jamb Detail GB Bar Fixing Detail GB Transom / Purlin Detail GB Transom / Purlin Detail GB Plan view of rafter / Purlin Junction GB Section through Purlin GB Jamb Detail - DG GB Section through BR515 (302915) GB Fixing Shoe Machining Details GB Universal GB Universal GB Jamb Detail GB Jamb Detail GB Purlin Detail GB Purlin Detail GB Glazing Bar Detail Cross Sections GB-7-IN01
24
25 N/A Scale: 1:1 Elevations REV: Mono Pitched Canopy Cross Sections GB-7-C01
26 Elevations N/A Scale: 1:1 REV: - Thermal / / Cross Sections GB-7-C02
27 N/A Scale: 1:1 Jamb Detail REV: - Jamb flashing fixed to cap Glazing bar cap 40 x 40 x 3mm (FAL ) Transom notch for onto Cross Sections GB-7-001
28 N/A Scale: 1:1 Bar Fixing Detail REV: - 3/16"csk machine screw WM51024 or WM50090 Backing seal WM51024 Backing seal Transom notch for onto g screw Fixing shoe Cross Sections GB-7-002
29 N/A Scale: 1:1 Transom Detail REV: WM51024 or WM50090 Backing seal WM51024 Backing seal Fixing shoe Cross Sections GB-7-003
30 N/A Scale: 1:2 Transom Detail REV: - Head flashing fixed to cap 3/16"csk machine screw Inseal tape #3109 x 6.0mm thick (by sellotape) between glass and cap Head Detail Rafter notch for onto Packing to suite Bottom Detail Sill Optional Drainage hole Cross Sections GB-7-004
31 N/A Scale: 1:1 Purlin Junction REV: - Slope Cap to glazing bar rafter Silicone sealant between glazing Purlin backing seal cut 20mm (cap Only) Continuous backing seal to rafter Cross Sections GB-7-005
32 Jamb Detail N/A Scale: 1:1 REV: - Double Glazed Jamb flashing fixed to cap Transom notch for onto Cross Sections GB-7-006
33 N/A Scale: 1:1 Purlin Detail REV: WM51024 Fasten cap with 3/16" csk machine screw Continuous silicone seal between glazing WM Flat as purlin stops Cross Sections GB-7-007
34 N/A Scale: 1:1 REV: - Main Rafter Detail Glazing cap WM WM51024 Flat fixed to rafter channel in short lengths as a stop for the purlin Glazing bar fixing shoe 75mm long Cross Sections GB-7-008
35 Fixing Shoe Detail N/A Scale: 1:1 REV: - Iluminex Glazing Bars Wedge to suit BR515 HEAD SILL 25 Mill off TEE & Fold up in Vice Drill to suit Fixing screws Cross Sections GB-7-009
36 Glazing Bar Detail N/A Scale: 1:1 REV: - Universal Glazing Bars Box section to suit Cross Sections GB-7-010
37 Jamb Detail N/A Scale: 1:1 REV: - Thermal Glazing Bars Jamb flashing fixed to cap Sealant Overseal Timber or plastic packer Fixing to engineer specs. Cross Sections GB-7-011
38 Jamb Detail N/A Scale: 1:1 REV: - Thermal Glazing Bars Jamb flashing fixed to cap Jamb flashing fixed to cap Sealant 1.6mm Flashing Flashing cup, 1.6mm aluminium strip. 50mm wide, rivited to Ctr max Timber or plastic packer Fixing to engineer specs. Cross Sections GB-7-012
39 Purlin Detail N/A Scale: 1:1 REV: - Thermal Glazing Bars Bracket mounted to first Fixings to engineer specs Bracket fabricated to suit Cross Sections GB-7-013
40 Purlin Detail N/A Scale: 1:1 REV: - Thermal Glazing Bars Cross Sections GB-7-014
41 Glazing Bar Detail N/A Scale: 1:1 REV: - Thermal Glazing Bars Head Detail Jamb flashing fixed to cap over seal Packer - Timber or plastic Fixing to engineers spec Packer - Timber or plastic Bottom Detail Packer End Caps to be 3mm thick Aluminium Fabricators to make Cross Sections GB-7-015
42
43 Exploded Views Updated: N/A Scale: N.T.S REV: - Dwg Dwg Revision Rev No Description Description Date GB-8-IN01 Index Page GB Purlin Detail GB Universal Glazing Bar Detail GB Glazing Bar Detail GB Exploded Views Exploded Views GB-8-IN01
44
45 Purlin Detail N/A Scale: N.T.S REV: - Commercial Glazing Bars Note: Transom milling detail the outer frame to that of a standard transom. See Section 9 Machining for milling/notching details. See Section 5 Hardware for screw lengths. 3/16" csk Slot head machine ctrs (for screw length see sheet GB-5-001) Glass stop cap 3/16" BSW csk screw Outer frame rafter Purlin stop Purlin milled around rafter Exploded Views GB-8-001
46 Universal Glazing Bar Detail N/A Scale: N.T.S REV: - Universal Glazing Bars cap Glass sheet spanning between box sections max ctrs 600mm 8g ss fixings at 400 ctrs base WM049 Glazing base seal Box section to suit span WM050 Glazing base seal Exploded Views GB-8-002
47 Glazing Bar Detail Updated: N/A Scale: N.T.S REV: - Head flashing Slot glazing bar to accept head flashing Glass Splice cut glazing bar if required Fixing shoes Wedge gaskets / / Glazing bars Glass stop Exploded Views GB-8-003
48 Exploded Views Updated: N/A Scale: N.T.S REV: Mitre Cut See section for machining and drainage g Pan x 50mm End Caps to be 3mm thick Aluminium Fabricators to make Glass g Pan x 12mm Exploded Views GB-8-004
49 Machining Updated: N/A Scale: N.T.S REV: - Dwg Dwg Revision Rev No Description Description Date GB-9-IN01 Index Page GB Cutting Formulae GB Purlin Machining GB Purlin Machining GB Purlin Machining GB Roof Bar Machining GB Glazing Bar Machining GB Glazing Bar Machining GB Purlin Machining GB Glazing Bar Machining GB Glazing Bar Machining Machining GB-9-IN01
50
51 N/A Scale: N.T.S REV: - Purlin Machining Machining GB-9-001
52 N/A Scale: N.T.S REV: - Purlin Machining Machining GB-9-002
53 N/A Scale: N.T.S REV: - Purlin Machining Machining GB-9-003
54 N/A Scale: N.T.S REV: - Purlin Machining Machining GB-9-004
55 Roof Bar Machining N/A Scale: N.T.S REV: - Commercial Glazing Bars Outer frame Cap Machining GB-9-005
56 N/A Glazing Bar Machining Scale: N.T.S REV: Glazing bar Machining GB-9-006
57 Glazing Bar Machining N/A Scale: N.T.S REV: - Universal Glazing Bars Cap Glazing bar Machining GB-9-007
58 Machining N/A Scale: N.T.S REV: - Thermal Head Notch Machining GB-9-008
59 N/A Glazing Bar Machining Scale: N.T.S REV: - Machining GB-9-009
60 N/A Glazing Bar Machining Scale: N.T.S REV: Head Purlin Head 10Ø Drainage hole Purlin Machining GB-9-009
SIG Awning / Casement / Fixed Lite 100
TYPICAL FRAME ASSEMBLY - AWNING WINDOW 07-01 85720-2 GASKET EXT FL JAMB 100 BS201 (3471) HEAD HINGED 100 86064 TRIM FIN A 83963 SCREW SQ 8G X 1.0 PAN PP SS #2 85737 GASKET EXT FL TRANSOM 85720-1 86065
More informationC.00. Ullrich Aluminium Co. Ltd. Ulltraclad Aluminium Cladding September Wall Batten Elevation. Horizontal battens between verticals at soffit
Horizontal battens between verticals at soffit 2 C.04 600 600 600 600 Cavity batten at 600 mm centres 1 C.03 Batten fixing points 1 C.04 1 C.07 1 C.12 1 C.13 1 C.14 Meter Box Window 1 C.08 1 C.09 800 800
More information2 AllSeasons Awning and Casement Windows
2 AllSeasons Awning and Casement Windows Summary Performance Awning Casement and Fixed windows Requirement Performance Comments Water and Air Pressure 455Pa 2130Pa 1000Pa 2300Pa Exceeds NZS 4211 2008 Weight
More informationSystem for 2+ Level Buildings
Issued Sept 205 Contact Info@symonite.co.nz System for 2+ Level Buildings Typical Details Issued: September 205 TYPICAL DETAILS CONTENTS.0 TYPICAL VERTICAL JOINTS 2.0 EXT. CORNER / TYPICAL HORIZONTAL JOINT
More informationSKIN SYSTEM ORDER FORM NOTES AND REQUIREMENTS
SKIN SYSTEM ORDER FORM NOTES AND REQUIREMENTS STRUCTURAL SUPPORTS It is recommended that all rafter centers be no greater than 24 and mullions required every 4ft down the slope. Slope Distances - Maximum
More informationSeries 525 LouvreMASTER Adjustable Louvre Window
Series 525 LouvreMASTER Adjustable Louvre Window DESIGNER SERIES Photo courtesy of Hanlon Windows Australia DATE: NOVEMBER 2009 REPLACES: AUGUST 2003 DESIGNER SERIES Series 525 KEY EATURES / PERORMANCE
More informationStorefront Installation Guide
Storefront General Notes: 1. Check Contract Documents and Shop Drawings. Understand and clarify any Field Verify Notes and approvals of drawings and products to be familiar with the project. Installation
More informationMETL-VISION WINDOW SYSTEM FOR HORIZONTAL WALL PIONEERING INSULATED METAL PANEL TECHNOLOGY
METL-VISION WINDOW SYSTEM FOR HORIZONTAL WALL Window assembly GUIDE PIONEERING INSULATED METAL PANEL TECHNOLOGY PIONEERING INSULATED METAL PANEL TECHNOLOGY CONTENTS DETAIL TITLE FILE NO. PAGE NO. INTRODUCTION..................................................................
More informationKocked Down with Ends Assembled
Installation Instructions for Quarter Round (QR) Kocked Down with Ends Assembled Note: Prior to starting Installation, check unit/parts for damage. Please read entire Installation Instructions & review
More informationDW VERTICAL INSTALLATION
AR-PJ-01-DW5V AR-PJ-02-DW5V AR-PJ-03-DW5V AR-PJ-04-DW5V AR-BS-01-DW5V AR-BS-02-DW5V AR-OC-01-DW5V AR-OC-02-DW5V AR-OC-03-DW5V AR-IC-01-DW5V AR-IC-02-DW5V AR-IC-03-DW5V AR-FO-01-DW5V AR-FO-02-DW5V AR-FO-03-DW5V
More informationRevision Date: April 01, Paramount Enclosure
Paramount Enclosure www.urbanindustries.com 15 Urban Industries, Inc. 2008 Tools The following tools are recommended for the installation of the Paramount Aluminum Enclosure and roof. 1 2 Level 1 4 Level
More information40mm Thermoclick. Type II Class 1 Clear Satin Anodize - 201R1 (Mid Grade Commercial)
http://www.sundancesupply.com 40mm Thermoclick Type II Class 1 Clear Satin Anodize - 201R1 (Mid Grade Commercial) U-Profile 12' Lengths $39 Out System offers a complete set of extrusions and accessories
More informationSUPREME WALL GARDEN ASSEMBLY INSTRUCTIONS 24/08/16 www.hallsgreenhouses.com Please refer to website for the most up to date instructions. SAFETY WARNING 1. Always wear protective glasses, shoes, gloves
More informationArchitectural Testing AAMA 501 TEST REPORT. Report Number: C Rendered to: Tubelite, Inc. Walker, Michigan
Architectural Testing AAMA 501 TEST REPORT Report Number: C1529.01-450-44 Rendered to: Tubelite, Inc. Walker, Michigan MODEL DESIGNATION: E4500 PRODUCT TYPE: Non-Thermal Storefront This report contains
More informationSynseal assembly guide 2009:Synseal assembly guide /2/09 12:38 Page 1. Conservatory Roof Assembly Guide
Synseal assembly guide 2009:Synseal assembly guide 2007 9/2/09 12:38 Page 1 Conservatory Roof Effective from February 2009 Synseal assembly guide 2009:Synseal assembly guide 2007 9/2/09 12:39 Page 6 3.1
More informationFinesse Profiles. Nailstrip
Installation Details Profile and Lap Detail 265/465 38mm NAILSTRIP *other widths available CD GRADE PLYWOOD 19mm STRUCTURE SILICONE * MIN 20mm VENTILATION GAP * WHEN ROOF PITCH IS UNDER 7.5 OR TOTAL COMBINED
More informationVertical Slider Section Detail
Vertical Slider Section Detail PRODUCT GUIDE Main & Bead Profiles 128 42 69 VS01 - Outer frame 150 139 210 189 60 52 52 52 48 30 42 60 18 72 90 18 60 VS02 - Cill VS14 - Cill 18 VS03 - Top Sash VS04 - Standard
More information173.1 INTRODUCTION SERIES 453 RESIDENTIAL DOUBLE-HUNG WINDOW INTO FRAMING. Australian Registered Design. Design Features :
INTRODUCTION DATE JUN 06 REPLACES NOV 04 SCALE NOT TO SCALE Design Features : Vertical sliding double-hung sashes inlaid directly into shopfront framing. Flyscreens tuck into dedicated recess in the jamb
More informationASS 70 FD folding / sliding door. Installation Guide
ASS 70 FD folding / sliding door Installation Guide IMPORTANT! These doors should be fitted by competent and trained installers. Please read these instructions thoroughly before beginning the installation.
More informationDW HORIZONTAL INSTALLATION
AR-PJ-01-DW2H 2" HORIZONTAL PANEL JOINT AR-PJ-02-DW2H 2" VERTICAL PANEL JOINT AR-PJ-03-DW2H 3" HORIZONTAL PANEL JOINT AR-PJ-04-DW2H 3" VERTICAL PANEL JOINT AR-PJ-05-DW2H CUSTOM REVEAL AR-PJ-06-DW2H DW-2000S
More information(Non Handed Kits) Slotted Hand Screwdriver. Power Driver & Bits. Work Gloves
Patio Door Kit Assembly Instructions -- 2-Panel Patio Door with Non-Assembled Frame and Assembled Sash Panels. (Non Handed Kits) Project Requirements: ~ This door was manufactured for installation into
More informationDesign Features : INTRODUCTION SERIES 704 ARCHITECTURAL SlideMASTER SLIDING DOOR. Australian registered design.
INTRODUCTION DATE DEC 07 REPLACES JUN 06 SCALE NOT TO SCALE Design Features : Series 704 has been designed as an internal sliding door that can be fabricated in numerous configurations: 'XF', 'FX', 'FXF',
More informationMethod of Build 1. Fire. Sound
Method of Build 1 General Viso Fire & Acoustic in the solid form differs from most other systems as it can be erected using 12.5mm & 15.0mm boards within the same Aluminium framework. Also hidden fix board
More informationCROSSBAR RAFTER ISOMETRIC
Super Sky Products' typical glazing system consists of glass panels or "lites" which are attached to the main framing members using extruded aluminum "retainers" or "pressure plates". These retainers are
More informationYWY M08 The new VELUX solution
YWY M08 The new VELUX solution VELUX roof windows and vertical window elements installed as a dormer in roof pitches between 42º and 52º YWY M08 is available as a double or triple unit and can be installed
More informationMulling & Transom General Installation Instructions
1. Overview: This document outlines general recommended instructions for combining Fleetwood s window and door products in the field. Additional detailed information on mulling and transoms is also available
More informationInstallation Guide. Evolve bi-fold. 8. Door restrictor- optional p9. 1. Before you start p2. 9. Adjustment. 2. Measuring and surveying p2
Evolve bi-fold Installation Guide 1. Before you start p2 8. Door restrictor- optional p9 2. Measuring and surveying p2 3. Configuration details p4 4. Installation p5 5. Glazing p5 6. Glazing packer details
More informationUpdates Interior compensation of varying infill thicknesses. THERM + V curtain walls
Aluminium curtain wall from 10 to 24 can be compensated T12 = Depths from 25 Cover profile /15 013003 6 m Cover profile /12 013004 6 m Structural profile / V 113005 6 m Pressure profile 47 118005 6 m 011070.LI
More informationMethod of Build 1. General
Method of Build 1 General GLAZED ELEVATIONS Viso Double Glazed in glazed form differs from many other systems as the vertical joints can have Viso dry joints or the unique HIDDEN mullion post between glazed
More informationLonsdale ThermGard Rafter Glazing Bars for conservatory roofs Introduction
Lonsdale ThermGard Rafter Glazing Bars for conservatory roofs Introduction This guide has been produced to assist specifiers and designers by illustrating typical rafter glazing bar details for sloped
More informationENGINEERING STRENGTH INSTAL L AT I O N M A NUAL OUR STRENGTH IS OUR STRENGTH
ENGINEERING STRENGTH INSTAL L AT I O N M A NUAL OUR STRENGTH IS OUR STRENGTH RAFTER PREPERATION RAFTER PREPARATION A FRAME PREPERATION AND ASSEMBLY A FRAME PREPARATION AND ASSEMBLY... Open boxes, remove
More informationESS Awning / Casement / Fixed Lite 52
05-01 83963/S8100PP SCREW SQ 8G X 1.0 PAN PP SS #2 (FRAME) 85990 /S8150PP SCREW SQ 8G X 1.5 PAN PP SS #2 (SASH) 83765 SCREW SQ 8G X 0.75 PAN SD SS #2 (SECURITY SCREEN TO FRAME) 86876 SCREW SQ M4 X 0.55
More informationKestrel Aluminium Systems Limited. Product Manual Section 11 Thermal Framing System - Fabrication. Manual Version
Limited Product Manual Section 11 - Fabrication Manual Version 23.0.1 Section 11.01 Fabrication 11.01.01 sheet 1 General guidelines for cutting and bar preparation Section 11 Contents Section 11.02 Fabrication
More informationInstallation Instructions
Installation Instructions Alcove Enclosure Before Installation please check that your shower enclosure system is undamaged Please read these instructions carefully March 2015 TOOLS REQUIRED Electric or
More informationALPINE TRAY. To get the best from this product please follow these recommendations.
F I X I N G D E TA I L S ALPINE TRAY The standing seam roofing profile is designed to withstand some of New Zealand s harshest weather in our toughest environments. To get the best from this product please
More informationASS 70 FD folding/sliding door installation guide
ASS 70 FD folding/sliding door installation guide 2 Preparation IMPORTANT These doors should be fitted by competent and trained installers. Please read these instructions thoroughly before beginning the
More informationSingle-Hung Windows Premium Atlantic Aluminum
TABLE OF CONTENTS Specifications... 2-2 QuickSpecGuide... 2-3 Elevations: Scale Single-Hung-FloridaSizes... 2-4 Grille Patterns... 2-5 SectionDetails: 6 Scale... 2-6 InstallationWallDetails... 2-10 PagethroughthePDFusingthebutonsontheright,
More informationSPG+S27 PATENT GLAZING. SPG+S27 Series Product Assembly Manual 1999
SPG+S27 PATENT GLAZING SPG+S27 Series Product Assembly Manual 1999 4.1.ii 03.99 SPG and S27 Patent Glazing Introduction The Company Senior Aluminium Systems are a group of companies based in the United
More informationADGV_001_FASTPOS. Date Jan 2013 Detail. Profile. Fastener Positioning Scale 1:20 Detail No. ADGV_ mm from top edge. 600mm MAX CTRS TIMBER STUDS
ADGV_001_FASTPOS Panel Timber Frame 12mm from top edge 600mm MAX CTRS TIMBER STUDS 200 mm MAX CTRS 50mm from corner Fastener Positioning Scale 1:20 No. ADGV_001 ADGV_003_SHTEDGEPOS Centre line of Timber
More informationINSTALLATION GUIDE SLIMLINE ROOF LANTERN 4 PANE CONFIGURATION
INSTALLATION GUIDE SLIMLINE ROOF LANTERN 4 PANE CONFIGURATION SLIMLINE STEP-BY-STEP INSTALLATION GUIDE Thank you for choosing Roof Maker, we hope you are delighted with your new rooflight. Our roof lanterns
More informationKestrel Aluminium Systems Limited. Product Manual Section 22 TB Commercial Door. Manual Version
Kestrel Aluminium Systems Limited Product Manual Section 22 TB Commercial Door Manual Version 23.0.1 PAS24: 2012 Section 22.01 Product Specification 22.01.01 sheet 1 Product specification 22.01.01 sheet
More informationMonaco Installation Guide - Surface Profiles
v1 Page 1 Thank you for purchasing this Monaco shower screen. Please study these instructions carefully before assembly and installation and check all supplied parts immediately upon receipt. These instructions
More informationINSTALLATION INSTRUCTIONS SIDELITE ASSEMBLY SERIES 900 TERRACE DOOR AND SERIES 925 PATIO DOOR
INSTALLATION INSTRUCTIONS SIDELITE ASSEMBLY SERIES 900 TERRACE DOOR AND SERIES 925 PATIO DOOR Phone: (800) 262-5151 Fax: (866) 262-3299 crlaurence.com usalum.com crl-arch.com 11M0292 HANDLING, STORAGE,
More informationPRODUCT DESCRIPTION. This evaluation report includes aluminum clad wood skylights based on the following tested configurations:
TEXAS DEPARTMENT OF INSURANCE Engineering Services Program / MC 10-A Guadalupe Street P.O. Box 149104 Austin, Texas 78714-9104 Phone No. (512) 22-2212 Fax No. (512) 46-669 PRODUCT EVALUATION Effective
More informationmethod of build Komfire-75 partitioning system 75mm Steel Stud & Plasterboard Partitioning System with Square Aluminium Cover Trims KOMFORT
821 811 342 821 835 853 863 840 12.5mm Plasterboard 837 75mm Steel Stud & Plasterboard Partitioning System with Square Aluminium Cover Trims Note: For clarity the cavity infill has not been shown 854 342
More information4. Partially open the operating panel and tilt the top toward the interior of the door (Figure 4). Lift the panel off the sill and set it aside.
Effective Date: 10/1/2017 Tools Needed Kit Contents Hardware Kit Safety Glasses Cordless drill Phillips screw bit Two-step drill bit (3/8-1/8 ) utility knife Interior Mullion Exterior Mullion Cover clamps
More informationINSTALLATION INSTRUCTIONS 2 x 4 1/2 for 1 Glass
INSTALLATION INSTRUCTIONS 2 x 4 1/2 for 1 Glass Deep pocket allows for direct anchor attachment to substrate without flat filler plate. 1/4 Ø perimeter anchor holes allows for direct anchor attachment
More informationSteel Reinforced Joining Thank you for choosing Andersen. Please leave this guide with building owner.
Steel Reinforced Joining (Horizontal/Vertical) for Andersen 400 Series Woodwright & Tilt-Wash Double-Hung, Picture, and Transom Windows and 400 Series Double-Hung Half Circle and Flexiframe Specialty Windows
More informationFlushglaze For Framed Openings and Horizontal Panels. Window System Installation Guide
Flushglaze 4500 For Framed Openings and Horizontal Panels Window System Installation Guide January 2017 BENCHMRK Welcome to Kingspan, global leaders in the design and manufacture of insulated metal panels
More information14000 Series. Fabrication and Installation Instructions
14000 Series Fabrication and Installation Instructions 14000 Series Revision December 01, 2009 Table of Contents GENERAL CONSTRUCTION NOTES... 3 EXTRUDED ALUMINUM PARTS... 4 ACCESSORIES... 7 OVERVIEW...
More informationKS42 MF SERIES - HORIZONTAL INSTALLATION
CI-DS-01-KSMF H CI-PJ-01-KSMF H CI-PJ-02-KSMF H CI-PJ-03-KSMF H CI-PJ-04-KSMF H CI-PJ-05-KSMF H CI-PJ-06-KSMF H CI-PJ-07-KSMF H CI-PJ-08-KSMF H CI-PJ-09-KSMF H CI-PJ-10-KSMF H CI-PJ-11-KSMF H CI-PJ-12-KSMF
More informationInstallation of Fiberglass Windows
Installation of Fiberglass Windows Before you begin please read and understand these installation instructions. The following installation instructions are recommended by Norwood and failure to follow
More informationSIMPLER BETTER FASTER
SIMPLER BETTER FASTER 1. FITTING RING BEAMS DETAILS Always work anti-clockwise viewed from outside the roof. Each bar should be sequentially numbered, i.e. 1, 2, 3. Select the ring beam, position the left
More informationINSTALLATION SHOP DRAWINGS FOR MINNEAPOLIS, MN
MINNEAPOLIS, MN 2-0- 2-- General Notes Abbreviations Deviations from Architectural Specifications Deviations from Architectural Drawings ALUM. = ALUMINUM B.O. = BY OTHERS CONT. = CONTINUOUS. = CLEARANCE
More informationKS SERIES - VERTICAL INSTALLATION
CS-DS-01-KSV CS DISCLAIMER CS-PJ-01-KSV KS42SL EXPANDED PANEL JOINT CS-PJ-02-KSV KS42SL ENGAGED PANEL JOINT CS-PJ-03-KSV KS45SL EXPANDED PANEL JOINT CS-PJ-04-KSV KS45 FLAT ENGAGED PANEL JOINT CS-PJ-05-KSV
More information14000 I/O Series Flush Glaze. Fabrication and Installation Instructions
14000 I/O Series Flush Glaze Fabrication and Installation Instructions Last saved on 12/18/2009 Table of Contents GENERAL CONSTRUCTION NOTES...3 EXTRUDED ALUMINUM PARTS...4 ACCESSORIES...5 OVERVIEW...6
More informationArchitect: Daluz/González Architekten Photo: Peter Baracchi CP 155 SLIDING DOOR INSTALLATION GUIDE. Edition 15/21
Architect: Daluz/González Architekten Photo: Peter Baracchi CP 155 SLIDING DOOR INSTALLATION GUIDE Edition 15/21 INDEX 1. IMPORTANT INFORMATION... 4 1.1. Lift & slide door overview... 5 1.2. Details...
More informationInstallation Guide Simplicity Alfresco. V1.9 Lu070318
0333 305 5272 www.canoports.co.uk Installation Guide Simplicity Alfresco V1.9 Lu070318 Tools Required Below is a list of tools that you will require to install your the Simplicity Alfresco System. Cordless
More information900 SERIES WALL PANELS
CI-DS-01-900 CI-PP-01-900 CI-PJ-01-900 CI-PJ-02-900 CI-PJ-03-900 CI-BS-01-900 CI-BS-02-900 CI-BS-03-900 CI-BS-04-900 CI-BS-05-900 CI-OC-01-900 CI-OC-02-900 CI-IC-01-900 CI-FO-01-900 CI-FO-02-900 CI-FO-03-900
More informationCardo DOOR & RETURN SHOWER ENCLOSURE INSTALLATION PLEASE READ THESE INSTRUCTIONS CAREFULLY.
Cardo DOOR & RETURN SHOWER ENCLOSURE INSTALLATION PLEASE READ THESE INSTRUCTIONS CAREFULLY. IT IS RECOMMENDED TO USE A TRAINED SHOWER INSTALLER FOR THIS SHOWER TO OBTAIN THE BEST INSTALLATION. D Square
More informationInstallation Guide Contemporary Alfresco V1.3 LU
Installation Guide Contemporary Alfresco V1.3 LU 010818 Tools Required Below is a list of tools that you will require to install you're the Contemporary Alfresco System. Cordless Drill Mastic Gun Spirit
More informationSide Light Frame Pack Assembly Instructions
Please read this complete set of assembly instructions before starting the installation and only when you understand the construction method start to follow the step by step guide. IDENTIFY THE PACK CONTENTS
More informationAllora ALCOVE ENCLOSURE INSTALLATION BEFORE INSTALLATION CHECK THAT YOUR ALLORA SHOWER ENCLOSURE SYSTEM IS UNDAMAGED
Allora ALCOVE ENCLOSURE INSTALLATION BEFORE INSTALLATION CHECK THAT YOUR ALLORA SHOWER ENCLOSURE SYSTEM IS UNDAMAGED ALCOVE SHOWER Your shower can be installed to open Left hand or Right hand by rotating
More information. crealco V I S TA F O L D B O T T O M R O L L E R F O L D I N G D O O R Index Legal Disclaimer 4 Profile Identification 5-7 Hardware Identification 8
. crealco V I S TA F O L D B O T T O M R O L L E R F O L D I N G D O O R VISTAFOLD SYSTEM PRODUCT MANUAL 2013 Wispeco (Pty) Ltd, All Rights Reserved Revision: June 2013 . crealco V I S TA F O L D B O T
More informationSide Light Frame Pack Assembly Instructions
Side Light Frame Pack Assembly Instructions Please read this complete set of assembly instructions before starting the installation and only when you understand the construction method start to follow
More informationFold-A-Way Patio Door ASSEMBLY & INSTALLATION GUIDE
Fold-A-Way Patio Door ASSEMBLY & INSTALLATION GUIDE This instruction guide provides the minimum recommended procedures to correctly prepare the rough opening, install a fold-a-way patio door unit and apply
More informationBlock Frame Inovo Patio Door/Transom/Sidelite Field Mulling Instructions. simonton.com/installation. If mulling sidelites, skip to Step 5.
Effective Date: 10/1/17 Tools Needed Kit Contents Safety Glasses Cordless Drill Phillips Screw Bit Two-step Drill Bit (3/8-1/8 ) Utility Knife Interior Mullion Exterior Mullion Cover Hardware Kit Clamps
More informationfor Andersen 400 Series Woodwright Transom over 400 Series Woodwright Double-Hung or 400 Series Woodwright Picture Window
for Andersen 400 Series Woodwright Transom over 400 Series Woodwright Double-Hung or 400 Series Woodwright Picture Window Congratulations! You have just purchased one of the many fine Andersen products.
More informationIn-line Patio Fabrication & Installation
In-line Patio Fabrication & Installation Instructions 2 Pane Patio p2 Cutting and Preparation p2 Welding and Cleaning p2 Assembly p2 Fabrication Instructions for 3/4 Pane Lock Style p3 Installation (removable
More informationKestrel Aluminium Systems Limited. Product Manual Section 12 60mm Polyamide Window System. Manual Version
Limited Product Manual Section 12 mm Manual Version 23.0.1 Section 12.01 Product Specification 12.01.01 sheet 1 mm Window System Product Specification 12.01.01 sheet 2 mm Window System Product Specification
More informationArchitectural Information Series 614 ClearVENT Double-hung Window Design Features Australian registered design
Architectural Information Page: 27. 1 Introduction Design Features This full vision vertical sliding sashless double-hung window has been designed to complement our existing quality product range including:
More informationINDEX SECTION 3: COMMERCIAL HARDWARE
SECTION 3: COMMERCIAL HARDWARE INDEX Product Page Patch Fittings 3.1-3.2 Patch Components 3.3 Architectural Door Pivots 3.4 Door Rails and Components 3.5 Ozone Self Closing Hydraulic Patch 3.6-3.7 Ozone
More informationHow To Install Windows: Nail-Fin Application
How To Install Windows: Nail-Fin Application Required Tools & Materials: Materials: 1 3/4" galvanized roofing nails. Nails must penetrate at least 1" into framing For mulled and/or DP50 or above units:
More informationThe Leka System Installation Guide
Installation Guide The Leka System Installation Guide The following guide has been created to assist in the fabrication and installation of the Leka System. Please note that each roof is individual and
More informationCurtain Wall Installation Guide
Curtain Wall Installation Guide Curtain Wall Installation Guide 1 IMPORTANT NOTICES! Important Notices & Information Manufacturer s Notes: The building envelope must be correctly prepared with weather
More informationVENTED GABLE DETAIL ROOF PANEL GABLE FLASHING 24" C/C MAX. BUTYL SEALANT TAPE ROOF PURLIN FLASH AB-1, AB-2, AB-3, OR AB-4
ROOF PANEL GABLE FLASHING FASTENER @ 24" C/C MAX. ROOF PURLIN BUTYL SEALANT TAPE FLASH AB-1, AB-2, AB-3, OR AB-4 FASTENER @ EVERY MAJOR RIB OR 12" C/C MAX. F-J TRIM FABRAL ALUMINUM SOFFIT FASTENER 24"
More informationKEITH PANEL SYSTEMS FUNDERMAX- MAX EXTERIOR EXPOSED FASTENER PRESSURE EQUALIZED WALL SYSTEM
S Y S T E M D E T A I L S FUNDERMAX- MAX EXTERIOR EXPOSED FASTENER PRESSURE EQUALIZED WALL SYSTEM PAGE TITLE PAGE Table of Contents Fundermax Max Exterior Product Information Design and Installation Information
More informationA REFERENCE GUIDE OF TYPICAL RAINSCREEN WALL AND WINDOW DETAILS
WARRANTY PROVIDER ACCEPTED A REFERENCE GUIDE OF TYPICAL RAINSCREEN WALL AND WINDOW DETAILS Per: 2006 B.C.B.C. Part 9 DISCLAIMER THE INFORMATION CONTAINED IN THIS DOCUMENT REPRESENTS CURRENT WOOD FRAME
More informationPlatinum Swing Panel Installation Instructions
Platinum Swing Panel Installation Instructions The Standard Platinum Swing Panel is designed to fit baths with a perimeter lip no taller than 20mm. If installing onto baths without a perimeter lip an optional
More informationPREMIUM GLASS BATH SCREEN
PREMIUM GLASS BATH SCREEN INSTALLATION GUIDE Bath screens must be installed in situations where the floor of the bathroom has a waterproof membrane installed. For New Zealand, the bath screen must be installed
More informationASTM E 1886 and ASTM E 1996 TEST REPORT. Rendered to: PRL ALUMINUM ARCHITECTURAL PRODUCTS City of Industry, California
Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Report No.: D1090.02-301-44 Rendered to: PRL ALUMINUM ARCHITECTURAL PRODUCTS City of Industry, California PRODUCT TYPE: Bi-Fold Door SERIES/MODEL:
More informationMonaco Installation Guide - Surface Profiles - vjun16
1 Thank you for purchasing this Monaco shower screen. Please study these instructions carefully before assembly and installation. Checking of Parts Parts are listed at the beginning of this guide. Please
More informationINOVO 2-LITE SLIDING PATIO DOOR
INOVO 2-LITE SLIDING PATIO DOOR ASSEMBLY AND INSTALLATION INSTRUCTIONS IMPORTANT: READ THE INSTRUCTIONS AND FAMILIARIZE YOURSELF WITH THE DOOR PARTS AND PIECES BEFORE BEGINNING ASSEMBLY AND INSTALLATION.
More informationALLORA SWING PANEL INSTALLATION INSTRUCTIONS
ALLORA SWING PANEL INSTALLATION INSTRUCTIONS Before Installation Please check that your Allora Swing Panel is undamaged SEQUENCE OF INSTALLATION These instructions are also available from the Athena website:
More informationInstallation Guidelines For ALUMINUM M-SERIES 3 PANEL SLIDING DOOR
www.quakerwindows.comv www.quakercommercialwindows.com PO Box 128 504 Highway 63 South Freeburg, MO 65035 800-347-0438 573-469-4151 (fax) Installation Guidelines For ALUMINUM M-SERIES 3 PANEL SLIDING DOOR
More informationAustin Standing Seam Awning with Overhead Braces Assembly and Installation Instructions. Assembly Instructions
Austin Standing Seam Awning with Overhead Braces Assembly and Installation Instructions Be sure to use safety glasses when assembling and installing the awning. Some metal parts may have sharp edges. Use
More informationTYPICAL BARGE DETAIL - CROSS SECTION
SELECTED OWENS CORNING ASPHALT SHINGLES APPLY A BEAD OF BITUMASTIC ADHESIVE/SEALANT METAL BARGE DRIP EDGE FLASHING No15 RAG FELT ROOF UNDERLAY PLYWOOD ROOF FRAME BARGE BOARD SOFFIT LINING (IF APPLICABLE)
More informationClearVue Roofing System Technical Manual
Technical Manual Components CLEARVUE RAFTER BRACKETS CV-02 2 Components CLEARVUE EXTRUSIONS CV-03 3 Components END PLATES - 6mm SHEET CV-04 4 Components END PLATES - 8mm SHEET CV-05 5 Components MECHANICAL
More informationpatio door installation guide
patio door installation guide Measuring & surveying p2 Mechanical jointing p5 Installation p5 Hardware adjustment p7 Sealing of outer frame p7 Cleaning p7 Walk through clearances p8 Minimum and maximum
More informationFIXED FLAT ROOFLIGHT: INSTALLATION INSTRUCTIONS (Double & triple glazed)
FIXED FLAT ROOFLIGHT: INSTALLATION INSTRUCTIONS (Double & triple glazed) Thank you for choosing to purchase a ROOF Maker Fixed Flat Rooflight. Assembly Procedure Guidance Please take precaution when moving
More information4500 Series. Fabrication and Installation Instructions
4500 Series Fabrication and Installation Instructions E4500 Series July, 2017 Table of Contents GENERAL CONSTRUCTION NOTES... 3 EXTRUDED ALUMINUM PARTS... 5 ACCESSORIES... 7 OVERVIEW... 8 FRAME FABRICATION...
More informationInstallation - Sub Cills
Installation - Sub Cills Fitting of Subcill Drainage paths through the sub-cill can be seen on the illustration alongside so care must be taken to ensure they are not obstructed and that screw fixings
More informationSCW Series Product Assembly Manual 2008 SCW CURTAIN WALL
SCW Series Product Assembly Manual 2008 SCW CURTAIN WALL 2.1.ii 07.08 SCW Curtain Wall Introduction The Company Senior Aluminium Systems are a group of companies based in the United Kingdom supported through
More informationNon-Reinforced Joining Guide (1-Way Vertical or Horizontal) for Andersen 200 Series Tilt-Wash Double-Hung Windows and Complementary Products
(1-Way Vertical or Horizontal) for Andersen 200 Series Tilt-Wash Double-Hung Windows and Complementary Products Non-Reinforced Joining Guide Congratulations! You have just purchased one of the many fine
More informationNon-Reinforced Joining Guide (2-Way Horizontal and Vertical Joining) for Andersen 200 Series Tilt-Wash Double-Hung and Transom Windows
(2-Way Horizontal and Vertical Joining) for Andersen 200 Series Tilt-Wash Double-Hung and Transom Windows Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly,
More information4-lite Patio Door. Installation Instructions
4-lite Patio Door Installation Instructions IMPORTANT: Read the instructions and familiarize yourself with the door parts and pieces before beginning assembly and installation. Note: Only the 5-0 x 6-8
More informationThe WANZ Guide to Window Installation. as described in E2/AS1 Amendment 7
The WANZ Guide to Window Installation as described in E2/AS1 Amendment 7 1 November 2017 Version 1.4 0800 397 263 technical@altus.co.nz The WANZ Guide to Window Installation as described in E2/AS1 Amendment
More informationmistley PELE Installation Guide vapr16 Mistley Bathroom Glass Limited No 4 One Mistley Quayside, High Street, Mistley, Essex CO11 1AL England
mistley BAT HRO O M G LASS vapr16 Page 2 Thank you for purchasing this Pele shower screen. Please study these instructions carefully before assembly and installation and check all supplied parts immediately
More informationThe Roofing Store TRS 9 35MM 78MM 150MM 78MM PRODUCT TECHNICAL DATA
TRS 9 35MM 78MM 150MM 78MM THICKNESS END SPAN INTERNAL SPAN MINIMUM PITCH 0.55MM 2.30M 3.20M 3 DESCRIPTION TRS 9 profile is designed for commercial and industrial roofing. The profile is suitable for low
More information3-LITE PATIO DOOR INSTALLATION INSTRUCTIONS
3-LITE PATIO DOOR INSTALLATION INSTRUCTIONS IMPORTANT: Read the instructions and familiarize yourself with the door parts and pieces before beginning assembly and installation. TOOLS NEEDED: Tape Measure
More information