SHED PACK Step 1: Choose your shed type.
|
|
- Avice Ellis
- 5 years ago
- Views:
Transcription
1 SHED PACK Step 1: Choose your shed type. Industrial Shed Open FarmShed Shed Pack / Types of Sheds Drawing # S0104.A001 Hanger Shed
2 =DISCLAIMER= Please read and agree to Purlin Brackets Terms and Conditions before purchasing if you don t agree to the following Terms and Conditions please do not purchase this product. Terms and conditions Legal Disclaimer Please read before purchasing Purlin Brackets is not responsible for, and expressly disclaims all liability for injury, loss of life or damages of any kind arising out of use, reference to, or reliance on any information contained within the Purlin Brackets Web Site, Purlin Brackets Ebay Site and Purlin Brackets Documentation supplied with Purlin Brackets Shed Sets. While the information contained within the Purlin Brackets Web Site, Purlin Brackets Ebay Site and Purlin Brackets Documentation supplied with Purlin Brackets Shed Sets is periodically updated, no guarantee is given that the information provided in Purlin Brackets Web Site, Purlin Brackets Ebay Site and Purlin Brackets Documentation supplied with Purlin Brackets Shed Sets is correct, complete, and up-to-date. Purlin Brackets only offers this information contained in Purlin Brackets Web Site, Purlin Brackets Ebay Site and Purlin Brackets Documentation supplied with Purlin Brackets Shed Sets as a guide only reference taken directly from the Australian Standards. Purlin Brackets strictly recommends any information followed by Purlin Brackets Web Site, Purlin Brackets Ebay Site and Purlin Brackets Documentation supplied with Purlin Brackets Shed Sets to be checked and authorized by a fully qualified Engineer and must meet the planning and building approval process of local law applications. Purlin Brackets takes no responsibility for the physical building processes and applications of the information contained in Purlin Brackets Web Site, Purlin Brackets Ebay Site and Purlin Brackets Documentation supplied with Purlin Brackets Shed Sets. Purlin Brackets strictly recommends a qualified Builder to be appointed for the Supervision and Responsibility of assembly of Purlin Brackets Shed Sets. Shed Pack / Types of Sheds Drawing # S0104.B001
3 Overview Page Step 2: Choose either pad footing layout or strip footing concrete slab layout. Step 3: Choose your shed width, wall height, shed length and roof pitch. (5, 11, 15 or 22.5 ) Top Hat Spacing Pad Footing Layout Shed Width Mullion Spacing Roof Pitch Step 4: Choose your portal frame spacing. a) Standard Single Portal Frames -3 metre spacing, C150mm or C200mm. or; b) Back to Back Portal Frames -4 metre spacing, C200mm only. -5 metre spacing, C200mm only. Step 5: Choose your wall cladding and roof cladding profile types. Apex Height Wall Height Girt Spacing 0 Average Height Ground Level Portal Frame Spacing Pad Footing Layout Shed Frame Front View Pad Footing Layout Strip Footing Concrete Slab Layout Shed Width Top Hat Spacing Mullion Spacing Roof Pitch Shed Length Portal Frame Spacing Apex Height Wall Height Girt Spacing 0 Average Height Ground Level Shed Pack / Overview Page Drawing # S0104.C001 Shed Frame Plan View Strip Footing Concrete Slab Layout Shed Frame Front View Strip Footing Concrete Slab Layout
4 3m Portal Frame Spacing Purlin Bracket Set *Engineering certification is compliant in wind region A, B, C and D. **Suitable for 6" (150mm) and 8" (200mm) C section. Each portal frame assembly is shipped with the following components 1x Apex Bracket, 3mm galvanised steel sheet, G450 - Z350 2x Haunch Bracket, 3mm galvanised steel sheet, G450 - Z350 2x Footing Plate, 3mm galvanised steel sheet, G450 - Z350 28x M16x40mm 8.8 grade structural bolt, galvanised 28x M structural nut, galvanised 56x M structural washer, galvanised 4x M16x105mm Claw Wedge Masonary Anchor, galvanised 4m & 5m Portal Frame Spacing Purlin Bracket Set *Engineering certification is compliant in wind region A and B only. **Suitable for 8" (200mm) C section only. Each portal frame assembly is shipped with the following components 2x Apex Bracket, 3mm galvanised steel sheet, G450 - Z350 4x Haunch Bracket, 3mm galvanised steel sheet, G450 - Z350 4x Footing Plate, 3mm galvanised steel sheet, G450 - Z350 28x M16x40mm 8.8 grade structural bolt, galvanised 28x M structural nut, galvanised 56x M structural washer, galvanised 4x M16x105mm Claw Wedge Masonary Anchor, galvanised *BOLTS INCLUDED IN SET M16x105mm Claw Wedge Masonary Anchor, galvanised M16x40mm 8.8 Structural Assembly, galvanised M16x40mm 8.8 grade structural bolt, galvanised M structural washer, galvanised M structural washer, galvanised M structural nut, galvanised *SCREWS TO BE SOURCED BY CUSTOMER Shed Pack / Overview Page 14g-10x25mm Hex Head Needle Point Class 4 use when screwing to metal 0.42 to 1.5mm in thickness Drawing # S0104.D001 SDM 14-10x50mm HEX BRA Cyclonic Roof Cladding Screw / Cyclonic Washer 12-14x45mm Class 4 Standard Roof Cladding Screw 14g-10x25mm Hex Head SDS Class 4 use when screwing to metal 1.5 to 4.0mm in thickness
5 Ridge Cap Gutters Roof Cladding Barge Flashing 3D Open Farm Shed & 3D Industrial Shed Perspective View C Door Option 3 D3: End Wall End Wall or Gable Wall Apex Brace Purlin Rafter Top Hat Batten Side Wall Girt Girt Gutter Bracket C Section Gutter Girt Header Perspective View C Hidden Cladding Column Mullion Haunch Brace End Wall Girt Wind Brace Roller Door Jamb Contact: Sam Phone: tisam2@yahoo.com.au Open Farm Shed & Industrial Shed 3D Internal Frame Diagram Drawing # S0104.E001 *Example shed only to represent components.
6 Door Option 4 D4: End Wall Ridge Cap Gutters Roof Cladding 3D Hanger Shed Barge Flashing Apex Brace Purlin Rafter Side Wall or Gutter Wall Perspective View C Top Hat Batten Girt Gutter Bracket C Section Gutter Girt Side Wall Girt Haunch Brace Hanger Shed 3D Internal Frame Diagram Drawing # S0104.E002 Perspective View C Hidden Cladding *Example shed only to represent components. Column
7 Pad Footing, Open Farm Shed & Pad Footing, Industrial Shed Shed Perspective View Roof Pitch Apex Height Wall Height Shed Length Portal Frame Spacing More portal frames may be added as per span table Optional Door Shed Top View (Hidden Cladding) Shed Width Top Hat Spacing Mullion Spacing Girt Spacing 0 Average Height Ground Level *Bitumen damp course between footing plate and concrete. Open Farm Shed & Industrial Shed Pad Footing Layout Drawing # S0104.F001 Date Drawn: Shed Front View (Hidden Cladding) Pad Dimension, View x3 Footing Type: Pad Footing Concrete Type: 25MPa Reinforcement: Refer to table
8 Pad Footing, Hanger Shed Shed Perspective View Roof Pitch Apex Height Wall Height Shed Length Portal Frame Spacing More portal frames may be added as per span table Shed Top View (Hidden Cladding) Shed Width Top Hat Spacing Mullion Spacing Girt Spacing Shed Front View (Hidden Cladding) 0 Average Height Ground Level Pad Dimension, View x3 Footing Type: Pad Footing Concrete Type: 25MPa Reinforcement: Refer to table *Bitumen damp course between footing plate and concrete. Hanger Shed Pad Footing Layout Drawing # S0104.F002 Date Drawn:
9 Strip Footing, Open Farm Shed & Strip Footing, Industrial Shed A More portal frames may be added as per span table Shed Length Portal Frame Spacing 1xSaw Cut Each Way every 3000 to 4500mm within 24-36hr of concrete pour Optional Doors Shed Top View (Hidden Cladding) Shed Width Shed Perspective View Front face only can be open with no mullions Top Hat Spacing Mullion Spacing Roof Pitch Refer to table *Bitumen damp course between footing plate and concrete. Apex Height Wall Height Girt Spacing 0 Average Height Ground Level 30 Section A:A, View x6, Soil Class: S, M or H1 Footing Type: Slab/Strip Footing Concrete Type: 25MPa Reinforcement: Trench Mesh, *Refer to table Slab: SL82 Top only Vapour Barrier: 0.2mm Polyethylene Sheet Open Farm Shed & Industrial Shed Strip Footing Slab Layout Drawing # S0104.G001 Date Drawn: Shed Front View (Hidden Cladding)
10 Strip Footing, Hanger Shed A More portal frames may be added as per span table Shed Length Portal Frame Spacing 1xSaw Cut Each Way every 3000 to 4500mm within 24-36hr of concrete pour Shed Top View (Hidden Cladding) Shed Width Shed Perspective View Top Hat Spacing Mullion Spacing Roof Pitch Refer to table *Bitumen damp course between footing plate and concrete. Apex Height Wall Height Girt Spacing 0 Average Height Ground Level 30 Section A:A, View x6, Soil Class: S, M or H1 Footing Type: Slab/Strip Footing Concrete Type: 25MPa Reinforcement: Trench Mesh, *Refer to table Slab: SL82 Top only Vapour Barrier: 0.2mm Polyethylene Sheet Hanger Shed Strip Footing Slab Layout Drawing # S0104.G002 Date Drawn: Shed Front View (Hidden Cladding)
11 51 *For all details on fixings and fasteners please refer to: S0104.H001 and relevant Wind Region Design Ruirements C End wall Girt Bracket Angle 50x50x1.6mm 100mm Long 4x Tek Screw 4x Tek Screw, Connect to Purlin Rafter 300mm Critical Structural Laps, Wall Girts and Top Hat Battens Must Overlap 300mm 4x Tek Screw, 25mm in from each edge Apex Bracket & Haunch Bracket 8x M16x40mm 8.8 Structural Assembly, galvanised Roof Cladding: Screw every 2nd Rib at Sheet Ends Otherwise screw every 3rd Rib C Perspective View C 50 Ɵ C Wind Bracing must be over Top Hat Batten and Wall Girts. qty= Cross brace to 30% per roof plane Ridge Cap Flashing (match roof pitch angle) Tek screw every 500mm, each side Gutter Overhang Barge and Wall Flashing Tek screw every 500mm, top and side Wall Cladding: Screw every valley C Wind Bracing must be over Top Hat Batten and Wall Girts. qty= Cross brace to 30% per wall C Z Mullion Bracket 87x76x3mm 150mm Long 4x M16x40mm 8.8 Structural Assembly, galvanised Roller Door Jamb, Z150 Notch where ruired for: header, brackets, braces, purlins and footing plates. Tek screw to column every 300mm Perspective View C Hidden Cladding Girt Gutter Bracket 2x Tek Screw Contact: Sam Phone: tisam2@yahoo.com.au Open Farm Shed & Industrial Shed 3D Connection Diagram Drawing # S0104.H001 TH64 TH75 TH96 Door Jamb, Footing Plate Angle 50x50x3mm 50mm Long. 1x Dynabolt M10x70mm. 2x Tek screw Footing Plate 2x M16x105mm Claw Wedge Masonary Anchor, galvanised 2x M16x40mm 8.8 Structural Assembly, galvanised *Example shed only to represent components. End of Purlin or Wall Girt 2x Tek Screw Wrap Wind Brace around members 4x Tek Screw Pack end wall Girts with structural ply, or for greater thickness, use non-compressive material. Alternatively increase Girt top hat size. 2x Tek Screw
12 51 *For all details on fixings and fasteners please refer to: S0104.H001 and relevant Wind Region Design Ruirements C End wall Girt Bracket Angle 50x50x1.6mm 100mm Long 4x Tek Screw 4x Tek Screw, Connect to Purlin Rafter 300mm Critical Structural Laps, Wall Girts and Top Hat Battens Must Overlap 300mm 4x Tek Screw, 25mm in from each edge Apex Bracket & Haunch Bracket 8x M16x40mm 8.8 Structural Assembly, galvanised Roof Cladding: Screw every 2nd Rib at Sheet Ends Otherwise screw every 3rd Rib C Perspective View C 50 Ɵ C Wind Bracing must be over Top Hat Batten and Wall Girts. qty= Cross brace to 30% per roof plane Ridge Cap Flashing (match roof pitch angle) Tek screw every 500mm, each side Gutter Overhang Barge and Wall Flashing Tek screw every 500mm, top and side Wall Cladding: Screw every valley C Wind Bracing must be over Top Hat Batten and Wall Girts. qty= 1 cross brace per wall C Mullion Bracket 87x76x3mm 150mm Long 4x M16x40mm 8.8 Structural Assembly, galvanised Wind Bracing must be over Top Hat Batten and Wall Girts. qty= Cross brace to 30% per wall Girt Gutter Bracket 2x Tek Screw 64 Z150 4x Tek Screw, Connect to Column 4x Tek Screw, 25mm in from each edge Perspective View C Hidden Cladding Hanger Shed 3D Connection Diagram Drawing # S0104.H002 TH64 Side Wall Girts, Must Overlap 300mm TH75 TH96 *Example shed only to represent components.
13 Single end wall portal frames - 3m spacings Single Rafters **Suitable for 150mm/6" and 200mm/8" C Section 1x Apex Bracket 8x Structural Assembly Single Mullions Single Columns 1x Haunch Bracket 1x Compact Gutter Girt (optional) 8x Structural Assembly Optional: Compact Gutter Girt Bracket Contact: Sam Phone: tisam2@yahoo.com.au Single Portal Frame, with Mullions Drawing # S0104.I001 1x Footing Plate 2x Structural Assembly 2x Masonry Anchor 1x Mullion Footing Plate 2x Structural Assembly 2x Masonry Anchor SHEET 1 of 1
14 Single internal portal frames - 3m spacings Single Rafters **Suitable for 150mm/6" and 200mm/8" C Section 1x Apex Bracket 8x Structural Assembly Single Columns 1x Haunch Bracket 1x Compact Gutter Girt (optional) 8x Structural Assembly Optional: Compact Gutter Girt Bracket Single Portal Frame, no Mullions Drawing # S0104.I002 1x Footing Plate 2x Structural Assembly 2x Masonry Anchor SHEET 1 of 1
15 Back to back end wall portal frames - 4m & 5m spacings **ONLY 200mm/8" C Section can be used for back to back portal frames Double Apex Brace 1x Universal Mullion Bracket Single Mullions 2x Apex Bracket 8x Structural Assembly 2x Haunch Bracket 1x Compact Gutter Girt (optional) 8x Structural Bolt Assembly Optional: Compact Gutter Girt Bracket Double Rafters Double Haunch Brace Double Portal Frame, with Mullions Drawing # S0104.J001 2x Internal Footing Plate 3mm 2x Structural Bolt Assembly 2x Masonry Anchor - Exploded 1x Mullion Footing Plate view x2 2x Structural Bolt Assembly 2x Masonry Anchor Double Columns
16 Back to back internal portal frames - 4m & 5m spacings **ONLY 200mm/8" C Section can be used for back to back portal frames Double Apex Brace 2x Apex Bracket 8x Structural Assembly Optional: Compact Gutter Girt Bracket 2x Haunch Bracket 1x Compact Gutter Girt (optional) 8x Structural Bolt Assembly Double Rafters Double Haunch Brace Double Portal Frame, no Mullions Drawing # S0104.J002 2x Internal Footing Plate 3mm 2x Structural Bolt Assembly 2x Masonry Anchor - Exploded view x2 Double Columns
17 Open Farm Shed & Industrial Shed -Roller Door Frame E E View x10 C Section Z Section D Z Section A B C Top View Section D View x10 C Section C Section C Section Open Farm Shed & Industrial Shed Door Assembly detail Drawing # S0104.K001 Z Section Z Section Z Section Z Section SHEET 1 of 1 A View x10 B View x10 C View x10 C Section
18 Customised Portal Frame Layout Once you have purchased a shed set you will be supplied the following customised information. Contact: Sam Phone: tisam2@yahoo.com.au Customised Portal Frame Layout Portal Frame Dimensions Punching Profile Drawing # S0104.L001 SHEET 1 of 1
SHED PACK. Sheds are commonly constructed using portal frames.
SHED PACK Sheds are commonly constructed using portal frames. This pack relates to purchasing portal frame purlin bracket sets. Ruest our free generic engineered and certified shed plans. SHED PACK Step
More informationSTRATCO GABLE HOMESHED STRATCO GABLE HOMESHEDS STUBBIE INSTALLATION GUIDE
STRATCO GABLE HOMESHED STRATCO GABLE HOMESHEDS STUBBIE INSTALLATION GUIDE INSTALL GUIDE BEFORE YOU START COUNCIL APPROVAL It is important that you have local council approval before building your Stratco
More informationDUTCH GABLE CARPORT RECOMMENDED INSTRUCTION MANUAL
DUTCH GABLE CARPORT RECOMMENDED INSTRUCTION MANUAL Table of Contents Introduction 2 Components 3 Step 1a Marking out the Perimeter of the Carport with Footing only 4 Step 2a Footing Set-Out for Concrete
More informationGABLE ROOF CARPORT RECOMMENDED INSTRUCTION MANUAL
GABLE ROOF CARPORT RECOMMENDED INSTRUCTION MANUAL Table of Contents Introduction 2 Components 3 Step 1a Marking out the Perimeter of the Carport with Footing only 3 Step 2a Footing Set-Out for Concrete
More informationSTEEL BUILDINGS RECOMMENDED INSTALLATION GUIDE
STEEL BUILDINGS RECOMMENDED INSTALLATION GUIDE 3 TO 30 METRE SPAN FRAME FIRST METHOD SUPPLIED BY: Last update 2 May 2008 2008 FBHS (Aust) Pty Limited FBHS (Aust) Pty Limited ABN 83 126 232 504 trading
More informationGable HomeshedsTM INSTALLATION BEFORE YOU START TOOLS REQUIRED GUIDE LARGE SPAN. Council Approval. Before Starting
INSTALLATION GUIDE Gable HomeshedsTM LARGE SPAN BEFORE YOU START Council Approval It is important to contact your local council before building your Stratco Gable Homeshed. You will have already received
More informationTRADITIONAL GABLE ATTACHED PATIO AND CARPORT. Your complete guide to building an ATTACHED Outback TRADITIONAL GABLE PATIO or CARPORT
TRADITIONAL GABLE ATTACHED PATIO AND CARPORT STRATCO OUTBACK ASSEMBLY INSTRUCTIONS. Your complete guide to building an ATTACHED Outback TRADITIONAL GABLE PATIO or CARPORT BEFORE YOU START Carefully read
More informationINSTALLATION GUIDE. Flat Roof Homesheds TM. Onto Concrete BEFORE YOU START TOOLS REQUIRED
INSTALLATION GUIDE Flat Roof Homesheds TM Onto Concrete BEFORE YOU START It is important to check your Local Government Authority requirements before the installation of your new Stratco Flat Roof Homeshed.
More informationMULTISPAN GABLE WITH HIP END ATTACHED PATIO
MULTISPAN GABLE WITH HIP END ATTACHED PATIO STRATCO OUTBACK ASSEMBLY INSTRUCTIONS. Your supplementary guide to building an ATTACHED MULTISPAN GABLE VERANDAH or PATIO WITH HIP END This set of instructions
More informationCURVED ROOF ASSEMBLY INSTRUCTIONS ATTACHED VERANDAH. Your supplementary guide to building an ATTACHED CURVED ROOF VERANDAH or PATIO BEFORE YOU START
ROOF ATTACHED VERANDAH ASSEMBLY INSTRUCTIONS Your supplementary guide to building an ATTACHED ROOF VERANDAH or PATIO This set of instructions should be used in conjunction with the Stratco instruction
More informationCLEARSPAN GABLE STRATCO OUTBACK ASSEMBLY INSTRUCTIONS. WITH GAZEBO END ATTACHED PATIO
CLEARSPAN GABLE WITH GAZEBO END ATTACHED PATIO STRATCO OUTBACK ASSEMBLY INSTRUCTIONS. Your supplementary guide to building an ATTACHED CLEARSPAN GABLE VERANDAH or PATIO WITH GAZEBO END This set of instructions
More information1 P a g e THIS IS A GENERIC MANUAL AND MAY NOT BE INDICATIVE OF YOUR CONSTRUCTION.
1 P a g e INDEX SECTION DESCRIPTION PAGE 1 TOOLS REQUIRED 3 2 GENERAL PARTS IDENTIFICATION.... 4 2.1 Structural Members 4 2.2 Brackets.. 4 2.3 Fasteners and Bolts 5 2.4 Roof and Wall Cladding.. 5 2.5 Gutters
More informationASSEMBLY INSTRUCTIONS GG77. BASE SIZE: 2.190m x 2.020m
ASSEMBLY INSTRUCTIONS GG77 BASE SIZE: 2.190m x 2.020m CONGRATULATIONS ON PURCHASING A DURATUF GUARDIAN SHED. BEFORE YOU BEGIN THE ASSEMBLY PLEASE NOTE SOME IMPORTANT POINTS: BEFORE YOU START: Read all
More informationSafety Glasses Safety Gloves Ladders Measuring Tape Spirit Level String Line. Tin-Snips Rivet Gun Caulking Gun Silicone Socket Set
BEFORE YOU START Carefully read these instructions and refer to them constantly during each stage of construction. If you do not have all the necessary tools or information, contact Stratco for advice.
More informationGLOSSARY OF TERMS SECTION 8
GLOSSARY OF TERMS SECTION 8 Anchor Bolt Angle Base Plate Bay Blocking CCB Centerline Chord Cladding Clip Closure Strip An A-307 steel bolt embedded in the concrete footing to anchor the base plate of the
More informationPINEHAVEN SHEDS Assembly Instructions FOR LEAN-TO SHEDS
PINEHAVEN SHEDS Assembly Instructions FOR LEAN-TO SHEDS GARDEN PRODUCTS www.pinehavensheds.co.nz 5/16 hex drive bit, By asking about our products at your nearest DIY or gardening store www.pinehavensheds.co.nz
More informationASSEMBLY INSTRUCTIONS GL75. BASE SIZE: 2.190m x 1.520m
ASSEMBLY INSTRUCTIONS GL75 BASE SIZE: 2.190m x 1.520m CONGRATULATIONS ON PURCHASING A DURATUF GUARDIAN SHED. BEFORE YOU BEGIN THE ASSEMBLY PLEASE NOTE SOME IMPORTANT POINTS: BEFORE YOU START: Read all
More informationASSEMBLY INSTRUCTIONS SS2520. BASE SIZE: 2.520m x 2.020m
ASSEMBLY INSTRUCTIONS SS50 BASE SIZE:.50m x.00m CONGRATULATIONS ON PURCHASING A SMART STORE SHED. BEFORE YOU BEGIN THE ASSEMBLY PLEASE NOTE SOME IMPORTANT POINTS: BEFORE YOU START: Read all instructions
More informationASSEMBLY INSTRUCTIONS SS2010. BASE SIZE: 2.020m x 1.020m
ASSEMBLY INSTRUCTIONS SS010 BASE SIZE:.00m x 1.00m CONGRATULATIONS ON PURCHASING A SMART STORE SHED. BEFORE YOU BEGIN THE ASSEMBLY PLEASE NOTE SOME IMPORTANT POINTS: BEFORE YOU START: Read all instructions
More informationINSTRUCTION MANUAL FOR MULTIBUILD VERTICAL CLAD QUAKER BARN WITH OR WITHOUT OUT MEZZANINE FLOOR UP TO 12 METRE SPAN
INSTRUCTION MANUAL FOR MULTIBUILD VERTICAL CLAD QUAKER BARN WITH OR WITHOUT OUT MEZZANINE FLOOR UP TO 12 METRE SPAN SUPPLIED BY: LAST UPDATED March 11, 2003 2001 AG&S Building Systems, Sydney Australia
More informationSTEEL BUILDINGS RECOMMENDED INSTALLATION GUIDE
STEEL BUILDINGS RECOMMENDED INSTALLATION GUIDE 3 TO 30 METRE SPAN FRAME FIRST METHOD SUPPLIED BY: Last update 19 September 2011 2011 FBHS (Aust) Pty Limited FBHS (Aust) Pty Limited ABN 83 126 232 504 trading
More informationSTEEL BUILDINGS RECOMMENDED INSTALLATION GUIDE
STEEL BUILDINGS RECOMMENDED INSTALLATION GUIDE 3 TO 30 METRE SPAN TILT UP METHOD SUPPLIED BY: Last update 19 September 2011 2011 FBHS (Aust) Pty Limited FBHS (Aust) Pty Limited ABN 83 126 232 504 trading
More informationBUILDING GUIDE FOR MULTIBUILD ALL STEEL BUILDINGS 3 TO 30 METRE SPAN
BUILDING GUIDE FOR MULTIBUILD ALL STEEL BUILDINGS 3 TO 30 METRE SPAN SUPPLIED BY: 26 Dobney Ave, Wagga Wagga. NSW. 2650 PH: 02 6925 5719, Fax 02 6925 2895 Email: sales@havashed.com.au, Web Address: www.havashed.com.au
More informationClopay Models 835/837 Sliding Door System Installation Guide
Clopay Models 835/837 Sliding Door System Installation Guide The aim of this instruction is to guide you through the process of construction and fitting of Sliding Doors. Due to the number of sizes available
More informationFLAT ROOF CARPORT RECOMMENDED INSTRUCTION MANUAL
FLAT ROOF CARPORT RECOMMENDED INSTRUCTION MANUAL Table of Contents Introduction... 2 Components... 3 Step 1 Marking out the Perimeter of the Carport... 3 Step 2a Footing Set-Out for Concrete Block Pad
More informationOutback Gable CLEARSPAN ATTACHED
It is important to check your Local Government Authority requirements before the installation of your new Stratco Outback Flat Verandah. It is the builderʼs responsibility to ensure any existing structure
More informationINSTRUCTION MANUAL FOR MULTIBUILD AMERICAN BARN
INSTRUCTION MANUAL FOR MULTIBUILD AMERICAN BARN SUPPLIED BY: LAST UPDATED April 26, 2006 2001 AS&G Building Systems AMERICAN BARN The American Barn uses similar components to other steel frame buildings.
More informationINSTALLATION GUIDE. Outback Clearspan Gable BEFORE YOU START ADDITIONAL MATERIALS ADDITIONAL MATERIALS WITH COOLDEK ROOFING
INSTALLATION GUIDE Outback Clearspan Gable WITH COOLDEK ROOFING BEFORE YOU START It is important to check your Local Government Authority requirements before the installation of your new Stratco Outback
More informationDUTCH GABLE FREESTANDING CARPORT
DUTCH GABLE FREESTANDING CARPORT STRATCO OUTBACK ASSEMBLY INSTRUCTIONS. Your complete guide to building a FREESTANDING Outback DUTCH GABLE CARPORT BEFORE YOU START Carefully read these instructions. If
More informationAbsco Premier Garden Shed Assembly Instructions Model: J30302G
Absco Premier Garden Shed Assembly Instructions FRONT: 9' 0 7 64" SIDE: 9' 0 7 64" HEIGHT: 6' 0 43 64" 0' 3 64" CONCRETE SLAB 0' 3 64" CONCRETE SLAB WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE IS A REBATED
More informationAbsco Premier Garden Shed Assembly Instructions Model: J30302G
Absco Premier Garden Shed Assembly Instructions FRONT: 9ft-0-7 64in SIDE: 9ft-0-7 64in HEIGHT: 6ft-0-43 64in 0ft--3 64in CONCRETE SLAB 0ft--3 64in CONCRETE SLAB WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE
More informationINSTALLATION GUIDE. Outback. Flat Attached BEFORE YOU START ADDITIONAL MATERIALS TOOLS REQUIRED. VERAnDAHS PATIOS CARPORTS
INSTALLATION GUIDE Outback VERAnDAHS PATIOS CARPORTS Flat Attached BEFORE YOU START It is important to check your Local Government Authority requirements before the installation of your new Stratco Outback
More informationOUTBACK FLAT ATTACHED VERANDAH PATIO CARPORT - INSTALLATION GUIDE BEFORE YOU START TOOLS REQUIRED ADDITIONAL MATERIALS
BEFORE YOU START It is important to check your Local Government Authority requirements before the installation of your new Stratco Outback Flat Verandah. It is the builder s responsibility to ensure any
More informationFinesse Profiles. Nailstrip
Installation Details Profile and Lap Detail 265/465 38mm NAILSTRIP *other widths available CD GRADE PLYWOOD 19mm STRUCTURE SILICONE * MIN 20mm VENTILATION GAP * WHEN ROOF PITCH IS UNDER 7.5 OR TOTAL COMBINED
More informationGIRTS ON BACK OF BUILDING
GIRTS ON BACK OF BUILDING ALL GIRTS ARE 1 1/2 SQUARE TUBE. GIRT LENGTHS FOR 12, 20, 24, AND 30 WIDE BUILDINGS: ON 12 WIDE BUILDINGS GIRTS ARE 67 3/4 LONG ON 20 WIDE BUILDINGS GIRTS ARE 56 3/4 LONG ON 24
More informationThe Roofing Store TRS 9 35MM 78MM 150MM 78MM PRODUCT TECHNICAL DATA
TRS 9 35MM 78MM 150MM 78MM THICKNESS END SPAN INTERNAL SPAN MINIMUM PITCH 0.55MM 2.30M 3.20M 3 DESCRIPTION TRS 9 profile is designed for commercial and industrial roofing. The profile is suitable for low
More informationE N G L I S H GARDEN SHED. Assembly Instructions. Suitable for Models WITH VARYING DEPTHS
GARDEN SHED Assembly Instructions Suitable for Models 6' Wide 8' Wide 0' Wide WITH VARYING DEPTHS GI0003 November 0 INSTALLATION ADVICE It's Not That Difficult! The construction of your shed isn't as complicated
More informationAppendix B Framing Component Installation Last updated 5/27/2013
Appendix B Framing Component Installation Last updated 5/27/2013 Apex Brace Installation Appendix B 1 Refer to apex connection detail on the engineering plans for the location of the apex brace. Refer
More informationAcceptable Standards of Domestic Construction
Truss or Rafter Roof Batten Triple grip fastener (for roof trusses) Foil lined Insulation blanket Top plate Sprocket Brick tie Top plate strapping at 1200mm max. cts. Note: Holding down straps should be
More informationAppendix A Door and Window Framing Last updated 5/21/2013
Appendix A Door and Window Framing Last updated 5/21/2013 1. First complete all previous framing for bay. Appendix A 1 Install all applicable columns, rafters, and/or eave purlins for the bay in which
More information900 SERIES PANEL SHEET INDEX STAGGERED ENDLAP STAGGERED MALE LEG AT ENDLAP CONTINUOUS FEMALE ENDLAP INSTALLATION SEQUENCE CI-WR
900 SERIES PANEL CI-DS-01-900 CI-PJ-01-900 CI-PJ-02-900 CI-EL-01-900 CI-EL-02-900 CI-EL-03-900 CI-EL-04-900 CI-EL-05-900 CI-EL-06-900 CI-EL-07-900 CI-EL-08-900 CI-RD-01-900 CI-RD-02-900 CI-RD-03-900 CI-EV-01-900
More informationHow-To-build guide carport
How-To-build guide carport What you can build using this guide This guide will show you how to build a free-standing, open-sided single carport. Before you begin building Contact your local territorial
More informationAbsco Regent Shed Assembly Instructions Model: J30372R
Absco Regent Shed Assembly Instructions FRONT: 9ft-0-7 64in SIDE: ft-3 3in HEIGHT: 6ft-0-43 64in ft-4-3in CONCRETE SLAB 0ft--3 64in CONCRETE SLAB WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE IS A REBATED
More informationKS SERIES - VERTICAL INSTALLATION
CS-DS-01-KSV CS DISCLAIMER CS-PJ-01-KSV KS42SL EXPANDED PANEL JOINT CS-PJ-02-KSV KS42SL ENGAGED PANEL JOINT CS-PJ-03-KSV KS45SL EXPANDED PANEL JOINT CS-PJ-04-KSV KS45 FLAT ENGAGED PANEL JOINT CS-PJ-05-KSV
More informationINSTALLATION GUIDE. Flat Roof Homesheds TM BEFORE YOU START TOOLS REQUIRED
INSTALLATION GUIDE Flat Roof Homesheds TM BEFORE YOU START It is important to check your Local Government Authority requirements before the installation of your new Stratco Flat Roof Homeshed. Read these
More informationINSTALLATION INSTRUCTIONS LS X 12-2 X 7 1/2 FRAME LOAFING SHED
INSTALLATION INSTRUCTIONS LS-12 12 X 12-2 X 7 1/2 FRAME ACTUAL FRAME BASE SIZE: 12 X 12-2 LOAFING SHED Our unique assembly process quickly transforms the individual pieces into a finished structure that
More information900 SERIES WALL PANELS
CI-DS-01-900 CI-PP-01-900 CI-PJ-01-900 CI-PJ-02-900 CI-PJ-03-900 CI-BS-01-900 CI-BS-02-900 CI-BS-03-900 CI-BS-04-900 CI-BS-05-900 CI-OC-01-900 CI-OC-02-900 CI-IC-01-900 CI-FO-01-900 CI-FO-02-900 CI-FO-03-900
More information15 YEAR GUARANTEE. Tough and long lasting Guaranteed waterproof for 15 years Economical and easy to fix AVAILABLE IN A RANGE OF COLOURS
INSTALLATION GUIDE AVAILABLE IN A RANGE OF COLOURS 15 YEAR GUARANTEE Tough and long lasting Guaranteed waterproof for 15 years Economical and easy to fix Coroline corrugated bitumen sheet is a tough lightweight
More informationINSTALLATION INSTRUCTIONS LS X 12-2 X 7 1/2 FRAME LOAFING SHED
INSTALLATION INSTRUCTIONS LS-24 24 X 12-2 X 7 1/2 FRAME ACTUAL FRAME BASE SIZE: 24 X 12-2 LOAFING SHED Our unique assembly process quickly transforms the individual pieces into a finished structure that
More informationDura-Lock Roof System
DLR-14 Dura-Lock Roof System Assembly and Installation Instructions Read the instructions before starting the job. They explain the steps required to produce a finished product that will meet factory specifications.
More informationINSTALLATION INSTRUCTIONS LS X 12-2 X 7 1/2 FRAME LOAFING SHED
INSTALLATION INSTRUCTIONS LS-30 30 X 12-2 X 7 1/2 FRAME ACTUAL FRAME BASE SIZE: 30 X 12-2 LOAFING SHED Our unique assembly process quickly transforms the individual pieces into a finished structure that
More informationGALVANIZED SHED GREEN 2.3 X 2.3 X 1.9m
INSTRUCTIONS FOR: GALVANIZED SHED GREEN 2.3 X 2.3 X 1.9m MODEL NO: GSS2323G Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
More informationVENTED GABLE DETAIL ROOF PANEL GABLE FLASHING 24" C/C MAX. BUTYL SEALANT TAPE ROOF PURLIN FLASH AB-1, AB-2, AB-3, OR AB-4
ROOF PANEL GABLE FLASHING FASTENER @ 24" C/C MAX. ROOF PURLIN BUTYL SEALANT TAPE FLASH AB-1, AB-2, AB-3, OR AB-4 FASTENER @ EVERY MAJOR RIB OR 12" C/C MAX. F-J TRIM FABRAL ALUMINUM SOFFIT FASTENER 24"
More informationROOM smooth cement f.f FLOOR LAYOUT
3,300 3,600 4,100 2,159 1,000 1,241 ROOM smooth cement f.f 168 900 1,091 1,000 1,241 4,400 FLOOR LAYOUT FLOOR LAYOUT CARTAKERS ROOM 2,159 1,000 1,241 SOUTH ELEVATION EAST ELEVATION 1,241 1,000 1,091 900
More informationGALVANIZED STEEL SHED 1.5 x 0.8 x 1.5M
INSTRUCTIONS FOR GALVANIZED STEEL SHED 1.5 x 0.8 x 1.5M MODEL NO: GSS150815G Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
More informationSteeline X-SPAN purlins
Steeline X-SPAN purlins DESIGN MANUAL F y y L R5 t D 2 Origin x x x x y D L steeline.com.au y y E CONTENTS IMPORTANT NOTES... 1-1 DISCLAIMER... 1-1 INTRODUCTION... 1-2 HOW TO USE THE X-SPAN purlins DESIGN
More informationASSEMBLY INSTRUCTIONS FOR VERSATUBE VERTICALLY SHEETED 2 x3 SINGLE SLOPE LOAFING SHED 12 W X 18 2 / 30 2 / 42 2 L X 8 / 10 6 ON CENTER FRAMES
ASSEMBLY INSTRUCTIONS FOR VERSATUBE VERTICALLY SHEETED x3 SINGLE SLOPE LOAFING SHED W X 8 / 30 / L X 8 / 0 ON CENTER FRAMES Our unique assembly process quickly transforms the individual pieces into a finished
More informationPOST FRAME CONSTRUCTION MANUAL
POST FRAME CONSTRUCTION MANUAL www.pole-barn.info www.apbbuildings.com TABLE OF CONTENTS 3. Jobsite Preparation 4. Setting Foundation Posts 5. Setting Corner Posts 6. Sidewall & Endwall Posts 7. Grade
More informationAbsco Premier Garden Shed Assembly Instructions Model: 23231GK
Absco Premier Garden Shed Assembly Instructions Model: 33GK FRONT:.6m SIDE:.6m HEIGHT:.00m 360mm CONCRETE SLAB 360mm WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EDGES DOWNWARDS BY 0mm. 50mm 0mm 50mm
More information4-SIDED NAVAJO SHELTER ARIZONA MODEL INSTALLATION INSTRUCTIONS
4-SIDED NAVAJO SHELTER ARIZONA MODEL INSTALLATION INSTRUCTIONS Recommended Tools: Before You Begin: Saftey Glasses, Tape Measure, Carpenters Level, Framing Square, Hex Head Nut Drivers, Chalk Line, Elec.
More informationStratco Sanctuary INSTALLATION BEFORE YOU START TOOLS REQUIRED GUIDE
INSTALLATION GUIDE Stratco Sanctuary Verandahs, Patios and Carports BEFORE YOU START It is important to check with your Local Government Authority prior to the installation of your new Stratco Sanctuary
More informationTOPSPAN 22 / 40 LYSAGHT TOPSPAN 22 / 40. Steel roof and ceiling battens for non cyclonic applications
TOPSPAN 22 / 40 LYSAGHT TOPSPAN 22 / 40 Steel roof and ceiling battens for non cyclonic applications Our TOPSPAN 22 ceiling batten and TOPSPAN 40 roof battens are the economical alternative to timber battens.
More informationExtrusions POLYLOCK ATTACHING EXTRUSIONS
Extrusions POLYLOCK ATTACHING EXTRUSIONS ITEM # DESCRIPTION USES 1001 Aluminum Girt 16 lengths Used in metal end packages and sidewalls as horizontal members. Requires girt/baseboard splice (#1000). 1000
More informationTimber to Timber - Timber to Concrete - Timber to Steel
01/2017 TIMBER CONNECTORS NOT TO BE USED IN EXTERIOR SITUATIONS Stainless Steel alternatives are available where stated Timber to Timber - Timber to Concrete - Timber to Steel MiTek manufactures and markets
More informationBlokes Shed INSTALLATION INSTRUCTIONS Custom Design & Build. Nationwide Delivery
Blokes Shed 10 Year Guarantee On Sanders workmanship Made in NZ Using NZ timber supplies 40+ Years Experience In business since 1975 Professional Install Available NZ wide Nationwide Delivery Available
More informationINSTALLATION INSTRUCTIONS
STRIP DOORS AIR DOORS INSTALLATION INSTRUCTIONS BULK PVC FILM STRIP SHEET PANEL SCREENS, CURTAINS and ENCLOSURES MEGA-PRO SWINGING DOORS DOCK ACCESSORIES IMPORTANT Carefully examine the carton(s) for damage.
More informationStandard 25 Wide Structure
Standard 25 Wide Structure Truss Arch Style 2 piece 12ft c/c typical Arch Depth 12 Webbing Diameter 1/2 1 run straight 2 runs straight Wind Brace - up to 120 8 Wind Brace - up to 192 12 Wind Brace - over
More informationVENTED GABLE DETAIL ROOF PANEL GABLE FLASHING 24" C/C MAX. BUTYL SEALANT TAPE ROOF PURLIN FLASH AB-1, AB-2, AB-3, OR AB-4
GABLE FLASHING FASTENER @ 24" C/C MAX. ROOF PURLIN BUTYL SEALANT TAPE FLASH AB-1, AB-2, AB-3, OR AB-4 FASTENER @ EVERY MAJOR RIB OR 12" C/C MAX. F-J TRIM FABRAL ALUMINUM SOFFIT FASTENER 24" C/C MAX. BUTYL
More informationIt is important that you contact your local government authority to determine if building approval is required.
HANDI-MATE SHED HANDI-MATE LOCKER INSTALLATION GUIDE INSTALL GUIDE BEFORE YOU START PRIOR TO INSTALLATION It is important that you contact your local government authority to determine if building approval
More informationMUELLER
Slab Mounted: 24x24 Backyard Building with Optional Center Girts Instructions Mueller Backyard Building Kits are not engineered structures and do not meet any specific building code criteria. 877-2- MUELLER
More informationDouble Beam Freestanding Pergola Installation Guide
Double Beam Freestanding Pergola Installation Guide Patent Pending. Copyright 2011 USAVinyl, LLC - All Rights Reserved The information contained in these instructions are proprietary to USAVinyl, LLC and
More informationRecommended Slating Tools
Recommended Slating Tools Product Size L Sketch of Article No. Description 60-070 Scriber 60-00 Slater s Hammer 60-00 Slater Ripper 60-080 Parallel Shears 60-0 Slate Cutter Kwiksnip Slate Guuillotine Slate
More informationHANDI-MATE SHED BEFORE YOU START INSTALL GUIDE HINGED DOOR HANDI-MATE INSTALLATION GUIDE PRIOR TO INSTALLATION
HANDI-MATE SHED HINGED DOOR HANDI-MATE INSTALLATION GUIDE INSTALL GUIDE BEFORE YOU START PRIOR TO INSTALLATION It is important that you contact your local government authority to determine if building
More informationDIY SHED GUIDE Planning your Project I Simple Illustrations I Hints
Easy Step by Step Guide DIY SHED GUIDE Planning your Project I Simple Illustrations I Hints TIMBERLINK. MADE OF TASMANIA. DIY Shed Guide Timberlink Green Outdoor Structural Range Timberlink Green Outdoor
More informationIMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS FOR AZTEC SHELTER
IMPORTANT -- SPECIAL INSTALLATION INSTRUCTIONS FOR AZTEC SHELTER ** READ ALL INSTALLATION INSTRUCTIONS BEFORE STARTING!** If at any point, you have questions, call 1-800-851-0865...(The manufacturer will
More informationASSEMBLY INSTRUCTIONS
Quality Built In ASSEMBLY INSTRUCTIONS MK4B BASE SIZE 4210mm x 3380mm ASSEMBLY INSTRUCTIONS Tools Required: Drill Drill Bit 3.5mm Drill Bit 6mm (for clear roof panel only) Hex Drive 5/16 Riveter Hammer
More informationINSTALLATION INSTRUCTIONS LS X 12-2 X 7 1/2 FRAME LOAFING SHED
INSTALLATION INSTRUCTIONS LS-12 12 X 12-2 X 7 1/2 FRAME ACTUAL FRAME BASE SIZE: 12 X 12-2 LOAFING SHED Our unique assembly process quickly transforms the individual pieces into a finished structure that
More informationINSTRUCTION MANUAL J23232GK
We thank you for choosing an Australian Made Shed. For further assistance please visit our detailed instructional video library at Http://www.abscosheds.com.au/watch-videos At ABSCO Industries we are always
More informationAbsco Highlander Shed Model: 3045HK
FOR CONSTRUCTION IN NON-CYCLONIC AREAS WIND RATING: W33N (N2) FRONT: 3.0 m SIDE: 4.48m HEIGHT: 2.3 m CONCRETE SLAB 300mm 4580mm CONCRETE WHEN LAYING YOUR CONCRETE SLAB, ENSURE THERE IS A REBATED EDGE 25mm
More informationCorner Potting Store Assembly Instructions
Corner Potting Store Assembly Instructions English SS225E Before assembly We recommend that time is taken to read the instructions before starting assembly, then follow the easy step by step guide. The
More informationTABLE OF CONTENTS A. PBR
TABLE OF CONTENTS A. PBR Panel 1. PBR Panel Architect/Engineer Information....................................... 2 2. PBR Panel UL 90 Requirements............................................... 3 3. PBR
More informationDesign Guide Pryda Connectors for Steel Framing
Pryda Connectors for Steel Framing Copyright: (c) Pryda Australia A Division of ITW Australia November 2012 November 2012 Design Guide Pryda Connectors for Steel Framing INDEX General Notes General information
More informationDeluxe Cabana INSTALLATION INSTRUCTIONS. INSTALLATION Deluxe INSTRUCTIONS Cabana
INSTALLATION Deluxe INSTRUCTIONS Cabana 1 Deluxe Cabana 10 Year Guarantee On Sanders workmanship Made in NZ Using NZ timber supplies 40+ Years Experience In business since 1975 Professional Install Available
More informationDoor Canopy. PDL Building Products Industrial Parkway, N. Olmsted, OH Phone:
Door Canopy Door Canopies are attractive and efficient while eliminating the need and expense of drafting and manufacturing canopies as part of the building package. Construction: 26 gauge material around
More informationAPPENDIX 1 : Post and Beam Model
Good Practice Guide to Hut Building Prepared by Reforesting Scotland s Campaign for a Thousand Huts (5th Draft) APPENDIX 1 : Post and Beam Model Peter Caunt & Bernard Planterose June 2017 www.thousandhuts.org
More informationGuardian warm roof conversion system. Installation Guide
Guardian warm roof conversion system Installation Guide 2 www.guardianroof.co.uk Conservatory walls consist largely of glazed elements including windows and doors that may include structural mullions or
More informationNEVADA ASSEMBLY INSTRUCTIONS
NEVADA ASSEMBLY INSTRUCTIONS BASE SIZE: 2.700m x 1.500m NEVADA Tools Required: Battery Drill Riveter Hammer Tape Measure Ladder Skillsaw Level Screwdriver - Flat 3/8 Hex Drive bit 8mm Hex Drive bit Drill
More informationGeneral Layout. Eng. Maha Moddather
General Layout Eng. Maha Moddather mahamoddather@eng.cu.edu.eg Introduction Concrete Beam subjected to Bending Moment around Major Axis M x Compression d Concrete tensile strength is neglected A S Tension
More informationTrack Rack. * Track Racks are not lockable
The Track Rack s unique staggered, sliding hook design creates the greatest parking efficiency while still providing easy access to any particular bike. When adding or removing a bike to the rack, simply
More informationPotting Store Assembly Instructions
Before assembly We recommend that time is taken to read the instructions before starting assembly, then follow the easy step by step guide. The instruction sheet is only a guide to the assembly. Certain
More informationUNIVERSAL ASSEMBLY INSTRUCTIONS FOR VERSATUBE FRONTIER GARAGE BUILDINGS
UNIVERSAL ASSEMBLY INSTRUCTIONS FOR VERSATUBE FRONTIER GARAGE BUILDINGS Our unique assembly process quickly transforms the individual pieces into a finished structure that will give you years of service.
More informationHILAND TRAY FORM AND FUNCTION MATERIAL SPECIFICATIONS DESIGN GUIDE ROOFING I WALLING
HILAND TRAY ROOFING I WALLING DESIGN GUIDE FORM AND FUNCTION Hiland Tray is a modern 455mm wide tray roofing and walling system, roll formed onsite with a mobile roll forming facility in long single lengths
More information3.1 General Provisions
WOOD FRAME CONSTRUCTION MANUAL 107 3.1 General Provisions 3.1.1 Prescriptive Requirements The provisions of this Chapter establish a specific set of resistance requirements for buildings meeting the scope
More informationASSEMBLY INSTRUCTIONS
Quality Built In ASSEMBLY INSTRUCTIONS MK3 BASE SIZE 3380mm x 1715mm ASSEMBLY INSTRUCTIONS Tools Required: Drill Drill Bit 3.5mm Drill Bit 6mm (for clear roof panel only) Hex Drive 5/16 Riveter Hammer
More informationSteelChief Installation Instructions for pre-assembled panel form sheds GABLE ROOF
SteelChief Installation Instructions for pre-assembled panel form sheds GABLE ROOF Please read fully before commencing work...any queries will be promptly answered, contact theboss@steelchief.com.aui MPORTANT
More informationAbsco Aviary Assembly Instructions Model: A23231G
Absco Aviary Assembly Instructions Model: A23231G FRONT: 2.26m SIDE : 2.22m HEIGHT: 1.96m WHEN LAYING YOUR CONCRETE SLAB, CHAMFER THE 50mm EDGES DOWNWARDS BY 10mm. 50mm 10mm 50mm THIS WILL ENSURE THAT
More informationStructural Calculations
Structural Calculations Project Project Number 14 266 Napier Girls High School Performing Arts Building (Arthur Building) Document Control Date Version Extent of Revision Status 21 September 2015 A Original
More informationWith Pitch Collector Frame
With Pitch Collector Frame INSTALLATION INSTRUCTIONS FOR SOLAR WATER HEATER SYSTEMS This frame must be installed by an authorised person. Please leave this guide with the householder. SOLAHART INDUSTRIES
More informationIDAHO ASSEMBLY INSTRUCTIONS. BASE SIZE: 1.800m x 1.200m
IDAHO ASSEMBLY INSTRUCTIONS BASE SIZE: 1.800m x 1.200m IDAHO Tools Required: Battery Drill Riveter Hammer Tape Measure Ladder Skillsaw Level Square Drive Bit No.2 3/8 Hex Drive Bit 8mm Hex Drive Bit Drill
More information5 5 8 " 60" 53 8 " " 7" 5 1 2" 7" " FIVE MODELS TO MEET YOUR DESIGN REQUIREMENTS.
Installation Manual GIRT LAMINATEDATED WOOD COLUMN 1/4" SCREW 1/2" BOLT STRUCTURAL REINFORCING BRACKET SKIRT BOARD 10,000 PSI PRECAST CONCRETE CONTINUOUS STEEL REINFORCEMENT GALV VANIZED STEEL UPLIFT ANCHORS
More information