26- H i n g e d P a t i o D o o r s - I n s w i n g

Transcription

1 Contents Hinged Patio Doors - Inswing Basic Unit Details... 2 Options / Accessories Accessibility Option... 5 Andersen Grilles... 6 Extension s... 7 Anchoring Methods... 8 Joining Details... 9 Suggested Product Applications /10 year limited warranty, fully transferable, non-prorated. Choose Low-E tempered or Low-E Sun tempered glass. Dual-pane tempered insulating glass is also available. Smooth, easy operation. Choose White, Sandtone or Terratone color exteriors. White interiors can be painted to match home s décor. r e v. 1 2 / 0 6 A r c h i t e c t u r a l D e t a i l F i l e

2 Basic Unit Details - Single and Two Panel Basic Unit Scale 3" = 1'-0" (1:4) H i n g e d P a t i o D o o r s - I n s w i n g 1-5/16" (33) 4-9/16" (116) 1-5/16" (33) 4-9/16" (116) 5-5/8"+ (143 +) depending on hinge adjustment 5-5/8"+ (143 +) depending on hinge adjustment Clear Opening Height Clear Opening Height Andersen optional gliding insect screen 10-+ (264+) depending on hinge adjustment Andersen optional hinged insect screen 10-+ (264+) depending on hinge adjustment 1/4" (6) 1/4" (6) 1-1/4" (318) 1-1/4" (318) 6" (152) 6" (152) Vertical Section - with Gliding Insect Screen Two Panel - Active/Stationar y or Stationar y/active Vertical Section - with Hinged Insect Screen Single Panel - Active Two Panel - Active/Stationar y or Stationar y/active 2 A r c h i t e c t u r a l D e t a i l F i l e r e v. 1 2 / 0 6

3 Basic Unit Details - Single and Two Panel Basic Unit Scale 3" = 1'-0" (1:4) H i n g e d P a t i o D o o r s - I n s w i n g Horizontal Section - with Hinged Insect Screen Single Panel Active Horizontal Section - with Gliding Insect Screen Two Panel - Stationar y/active (shown) or Active/Stationar y r e v. 1 2 / 0 6 A r c h i t e c t u r a l D e t a i l F i l e

4 Basic Unit Details - Single and Two Panel Basic Unit Scale 3" = 1'-0" (1:4) H i n g e d P a t i o D o o r s - I n s w i n g Door at 90 clear opening position Door at full clear opening position Astragal LC Clear Opening Width at 90 Clear Opening Width Full Open Position 50 = 2' 5-5/8" (752) 54 = 2' 7-5/8" (803) 60 = 2' 11-5/8" (905) 50 = 2' 5-5/8" (752) 54 = 2' 7-5/8" (803) 60 = 2' 11-5/8" (905) Horizontal Section Stationar y / Active A r c h i t e c t u r a l D e t a i l F i l e r e v. 1 2 / 0 6

5 Basic Unit Details - Stationar y Panel H i n g e d P a t i o D o o r s - I n s w i n g Basic Unit Scale 3" = 1'-0" (1:4) 1-5/16" (33) 4-9/16" (116) 5-5/8" (143 ) 5-5/8" (143) 5-5/8" (143) 10- (264) 1-1/4" (318) Minimum Rough Opening Width 1-1/4" (318) Horizontal Section Stationar y Panel 1/4" (6) 1-1/4" (318) 6" (152) Vertical Section Stationar y Panel Accessibility Option Scale 3" = 1'-0" (1:4) Low threshold sill Accessible Door A special accessible door option is available that offers a 32" clear opening width at 90 and a 1/2" high threshold. Meets door width and threshold height requirements of ICC/ANSI A and ADAAG guidelines. Contact your Andersen supplier for availability. 1/2" (13) r e v. 1 2 / 0 6 A r c h i t e c t u r a l D e t a i l F i l e

6 Standard Grille Options / Accessories Contact an Andersen Representative for project specific grille options. 200 Series Grille Options Removable Interior Grilles Andersen Finelight Grilles-Between-the-Glass Grille Profiles Scale = Full Removable Interior Wood Grille Profiles (chamfer profile). 7/16" 7/16" 7/16" 3/4" 7/8" 1-1/8" Andersen Finelight Grilles-Between-the-Glass 3/4" 1/2" 1" Window Profile Patio Door Profile 6 A r c h i t e c t u r a l D e t a i l F i l e r e v. 1 2 / 0 6

7 Options / Accessories Prefinished White Interior Extension s Scale 3" = 1'-0" (1:4) H i n g e d P a t i o D o o r s - I n s w i n g Interior extension jambs have a low-maintenance white finish and are available for 5 1/4" (133), 6 9/16" (167), and 7 1/8" (181) wall thickness. Other wall dimensions can be accommodated with extension jamb modification. Extension jambs are pre-drilled for easy application. r e v. 1 2 / 0 6 A r c h i t e c t u r a l D e t a i l F i l e

8 Anchoring Methods Scale 3" = 1'-0" (1:4) Wood Screw Fastener / Flange in Standard Position Wood Screw Fastener / Flange in Reversed Position Patio door unit is secured in opening using wood screw fasteners through the jamb (the flange itself cannot support the door). Patio door unit is secured in opening using wood screw fasteners through the jamb (the flange itself cannot support the door). Wood screw fastener Wood screw fastener 4-9/16" (116) 4-3/16" (106) exterior sheathing Flange Flange in reverse position Threaded Masonr y Fastener / Expansion Sleeve Patio door unit is secured in opening by pre-drilling through side jamb into masonry. Make sure that the unit frame parts do not become bowed when using anchoring methods. Unit will not operate properly if frame parts are stressed. threaded masonry fastener Flange removed A r c h i t e c t u r a l D e t a i l F i l e r e v. 1 2 / 0 6

9 Joining Details Andersen Joining Materials Scale 3" = 1'-0" (1:4) Active Panel 2" (51) Stationary Panel interior trim and extension jambs by others Structure by others Joining Compatibility Many Andersen units are designed to be joined with other Andersen units in a variety of non-reinforced and reinforced combinations. Other combination types and joining methods can be viewed in the Andersen Product Guide for Professionals, in Andersen Window Studio software, and by visiting andersenwindows.com. Combination designs should always be checked for design pressure performance requirements to make sure the appropriate joining method is specified. Andersen 2" support mullion wood filler 2" (51) Andersen 2" support mullion trim strip set in continuous bead of sealant each side 2" Support Mullion Frenchwood Patio Door Transom Active Panel Stationary Panel Andersen reinforced lvl joining strip unit Dimension height Andersen wood casing 1" (25) trim strip set in continuous bead of sealant each side unit Dimension height trim strip set in continuous bead of sealant each side Andersen reinforced lvl joining strip Inswing Patio Door Andersen LVL Reinforced Mullion Andersen LVL Reinforced Transom r e v. 1 2 / 0 6 A r c h i t e c t u r a l D e t a i l F i l e

10 Suggested Product Applications Wall Types Scale 1-1/2" = 1'-0" (1:8) Flange at head and jambs Remove flange at head and jambs Andersen insect screen (10) (10) Andersen insect screen Vertical Section Wood Siding / 2 x 4 Wood Stud Framing Vertical Section Brick Veneer / 2 x 6 Metal Stud Framing Minimum Rough Opening Rough opening dimensions shown are the minimum dimensions recommended for proper installation. These dimensions may need to be increased to allow for use of building wraps, flashing, sill or pan flashing, brackets, fasteners or other items which could decrease these dimensions. Adjusting rough opening dimensions to accommodate these materials is the responsibility of the designer or installer. Importance of Proper Installation Proper installation and maintenance of Andersen products are essential if optimum performance is to be fully attained. Written installation instructions which provide guidelines for proper installation are available for Andersen products from your local Andersen supplier or by writing to: Andersen Windows, Inc., Box 12, Bayport, MN or by visiting our website at Remember that every installation is different. Andersen strongly recommends consultation with an Andersen product representative and with an experienced contractor, architect, or structural engineer prior to the installation of any Andersen product. Construction by Others Andersen Corporation is not responsible for the design of, conditions in, or performance of, adjacent wall or roof construction beyond the perimeter of the Andersen units. NOTE: Where E.I.F.S. wall finish is adjacent to units, contact E.I.F.S. manufacturer for installation instructions, including the use of appropriate flashing, the proper use of sealant and backer rod, and the proper width of sealant joint around the perimeter of the unit. NOTE: Leave adequate clearance between sill and masonry for caulking and dimensional change of framework. Flange may be removed where construction sequence/ detailing requires no flange. 10 A r c h i t e c t u r a l D e t a i l F i l e r e v. 1 2 / 0 6

11 Suggested Product Applications Wall Types Flange at head and jambs Exterior trim by others Andersen insect screen Membrane flashing over flange (by others) (10) (10) Andersen insect screen Vertical Section E.I.F.S. / Concrete Masonr y Unit (CMU) Vertical Section Brick / Concrete Masonry Unit (CMU) Minimum Rough Opening Rough opening dimensions shown are the minimum dimensions recommended for proper installation. These dimensions may need to be increased to allow for use of building wraps, flashing, sill or pan flashing, brackets, fasteners or other items which could decrease these dimensions. Adjusting rough opening dimensions to accommodate these materials is the responsibility of the designer or installer. Importance of Proper Installation Proper installation and maintenance of Andersen products are essential if optimum performance is to be fully attained. Written installation instructions which provide guidelines for proper installation are available for Andersen products from your local Andersen supplier or by writing to: Andersen Windows, Inc., Box 12, Bayport, MN or by visiting our website at Remember that every installation is different. Andersen strongly recommends consultation with an Andersen product representative and with an experienced contractor, architect, or structural engineer prior to the installation of any Andersen product. Construction by Others Andersen Corporation is not responsible for the design of, conditions in, or performance of, adjacent wall or roof construction beyond the perimeter of the Andersen units. NOTE: Where E.I.F.S. wall finish is adjacent to units, contact E.I.F.S. manufacturer for installation instructions, including the use of appropriate flashing, the proper use of sealant and backer rod, and the proper width of sealant joint around the perimeter of the unit. NOTE: Leave adequate clearance between sill and masonry for caulking and dimensional change of framework. Flange may be removed where construction sequence/ detailing requires no flange. r e v. 1 2 / 0 6 A r c h i t e c t u r a l D e t a i l F i l e 11

12 Suggested Product Applications Wall Types Scale 1-1/2" = 1'-0" (1:8) Exterior trim by others 1-3/16" (30) Exterior trim by others Existing frame wall Flange at head and jambs Flange at head and jambs (10) Exterior trim by others (10) Andersen insect screen Andersen insect screen Vertical Section Stucco / Concrete Masonry Unit (CMU) Inset Door Vertical Section Existing Wall Minimum Rough Opening Rough opening dimensions shown are the minimum dimensions recommended for proper installation. These dimensions may need to be increased to allow for use of building wraps, flashing, sill or pan flashing, brackets, fasteners or other items which could decrease these dimensions. Adjusting rough opening dimensions to accommodate these materials is the responsibility of the designer or installer. Importance of Proper Installation Proper installation and maintenance of Andersen products are essential if optimum performance is to be fully attained. Written installation instructions which provide guidelines for proper installation are available for Andersen products from your local Andersen supplier or by writing to: Andersen Windows, Inc., Box 12, Bayport, MN or by visiting our website at Remember that every installation is different. Andersen strongly recommends consultation with an Andersen product representative and with an experienced contractor, architect, or structural engineer prior to the installation of any Andersen product. Construction by Others Andersen Corporation is not responsible for the design of, conditions in, or performance of, adjacent wall or roof construction beyond the perimeter of the Andersen units. NOTE: Where E.I.F.S. wall finish is adjacent to units, contact E.I.F.S. manufacturer for installation instructions, including the use of appropriate flashing, the proper use of sealant and backer rod, and the proper width of sealant joint around the perimeter of the unit. NOTE: Leave adequate clearance between sill and masonry for caulking and dimensional change of framework. Flange may be removed where construction sequence/ detailing requires no flange. 12 A r c h i t e c t u r a l D e t a i l F i l e r e v. 1 2 / 0 6