Series 618 MAGNUM Sliding Door

Transcription

1 Photo courtesy of Portland Aluminium & Glass. Designer Form & Function Building Design. Builder Beasley Construction Pty Ltd DATE: NOVEMBER 2009 REPLACES: OCTOBER 2007

2 KEY FEATURES / PERFORMANCE CHARACTERISTICS MAGNUM Sliding door internal view (Not to scale) Designed to complement the MAGNUM window systems. Standard frame is 133mm wide and will snap to the 102mm wide MAGNUM window frames without unsightly screws or rivets. 44mm and 50mm high flat sills are ideal for recessing into floor. 44mm Jambs and head match the standard 44mm flat square sill. The 33mm thick stiles are ideal for extra large doors in high wind load areas. Full height doors (2700mm) remove the need for highlights in most applications. We have successfully tested 2700mm x 4000mm XXF and 2700mm x 3000mm XF doors for compliance with the relevant Australian Standards. Achieving very high water resistance, refer water rating requirements pages for performance details on both sills. Reinforced frame legs are designed to retain the door panels in high wind load areas and help us achieve the high ultimate ratings. The accompanying optional stacking multi-panel external flydoor system nests into the main frame. The custom screen door system is designed to complement the glass door. The high water resistance of 450Pa allows these doors to be installed into most residential projects. Meeting stiles fitted with custom end closers that restrict water turbulence under extreme conditions. Unused frame recesses are closed off with snap-in flat fillers for improved appearance and water resistance. 90 Corner opening door available. Maximum Panel Height* Maximum Panel Width* Maximum Glass Thickness 2641mm 1500mm 20mm * Subject to individual site conditions and wind loads. Contact AWS Technical Support for more information, techsupport@awsaustralia.com.au TYPICAL CONFIGURATIONS

3 Sound Reduction HOW TO SPECIFY A number of glass combinations have been tested in similar sliding doors. Glass Description Rw Value 6.38mm Vlam Hush 32 (0;-2) 10.5mm Vlam Hush 34 (0;-2) 6.5VLam Hush / 8Air / 5Toughened 35 (-1;-4) SYSTEM NAME Vantage MAGNUM Sliding Door FINISH Powder Coat Anodised WERS RATINGS Single Glazed Glass Description COOLING HEATING Uw SHGCw Tvw Inf 5mm Clear 20% 18% mm Grey 35% 10% mm EverGreen 37% 9% mm Laminate 21% 17% mm Solace 39% 35% COLOUR Select from the Vantage range of approved powder coat or anodising colours GLASS Specify thickness 20mm Specify thermal performance where applicable (Uv & SHGC) Specify acoustic performance where applicable (RW) Double Glazed Glass Description COOLING HEATING Uw SHGCw Tvw Inf 4Clr/10Gap/4Clr 37% 43% Clr/10Gap/4EA 43% 47% Clr/10Ar/4EA 44% 50% Az/10Gap/4EA 38% 41% Clr/8Gap/5Clr 43% 47% D & 3D CAD Files Available GO TO: > CAD & Revit 3D Files CAD file: DWG or DXF VAN_618 MORE INFORMATION For the latest updates regarding this product visit our website HARDWARE Refer to hardware selection guide for compatible options Specification Assistance Need help specifying this product? call techsupport@ and our awsaustralia.com.au qualified technical and advisors our will qualified assist technical you with product advisors selection will assist and you specification with product for your selection project and specification for your project. PAGE 239

4 SPECIFIERS CHECKLIST Not all sliding doors are the same. Sure they open and close and if you are lucky they will accept a flydoor that keeps bugs out - but if you want your sliding door to perform, keep the elements and the bugs on the outside where they belong and operate smoothly for years to come there are some things you should check/compare when choosing your supplier. FEATURE 618 Opposition Does the door comply with the relevant Australian Standards? All sliding doors should comply but it pays to ask for written proof. Standard sliding door sill has a high water rating of 300 Pa Very exposed installations can be upgraded to an even higher 450 Pa water rating Multiple stackers We offer numerous door configurations including multiple stacking options. Recessed doors are also available including types XX, XXX and XXXX, XXXX XXXX Clean frame lines All unwanted frame recesses are closed off with flat fillers inside and out. Minimal sill recess and also minimal visible sill drain holes improve visual appearance. Both frame and panels are clean and square. Tall bottom rail standard on MAGNUM door panels. Recess sill option With a flat sill design we can offer a completely recessed sill detail, shown on later page. Numerous glazing options Single glazing from 4mm to 10.38mm thick. 20mm Insulating glass units. ClearVENT sashless double-hung insert available Fixed sidelights will accept sashless double-hung insert. Optional midrails Single glazed doors and sidelights will accept 57mm or 90mm deep midrails. We can also fit ClearVENT sashless double-hung insert over midrails. YES YES YES YES YES YES YES YES YES Matching screen door Optional screen frame nests onto main frame, secretly fixed - not a tack on frame, Sightlines have been matched up on screen and glass doors. Square screen door joinery to match glass door. Screen door can be supplied with stainless steel mesh. MAGNUM Sliding doors can be fitted with Centor S1 retractable screens. Strong panels We have designed this door for very exposed locations with clean stiles. Numerous locking options including mortice locks We offer a large variety of surface mounted locks including twin locking tongues. For the ultimate finish we also have mortice locks with raised 316 stainless steel pull handles or recess finger pulls. Stainless steel lock furniture For the ultimate finish the twin locking ANDO and ICON mortice lock furniture is available in marine grade 316 stainless steel. YES YES YES YES YES Sliding doors can be coupled to windows without visible rivets. YES

5 DESIGN FEATURES OCT 2007 This sliding door has been designed to complement the MAGNUM window systems. The standard frame is 133mm wide and will snap to the 102mm wide MAGNUM window frames without unsightly visible screws or rivets, details on these couplers are illustrated later in these notes. Frame assembly can be square cut or mitred. The 44mm and 50mm high flat sills are ideal for recessing into the floor. 44mm Jambs and head match the standard 44mm flat square sill. The 33mm thick stiles are ideal for extra large doors in high wind load areas. Full height doors (2700mm) remove the need for highlights in most applications. We have successfully tested 2700mm x 4000mm XXF and 2700mm x 3000mm XF doors for compliance with the relevant Australian Standards. Achieving very high water resistance, refer water rating requirements pages for performance details on both sills. Reinforced frame legs are designed to retain the door panels in high wind load areas and help us achieve the high ultimate ratings. Doors can be fabricated as XXF, FXX, FXXXXF, XXXF, FXXX, FXXXXXXF, XF, FX, FXF, XFF, FFX, FXXF, XX, XXX, XXXX, XXXXXX, CX, CXX, CXXX and CXXXXXXC. The accompanying optional stacking multi panel external flydoor system nests into the main frame. The custom screen door system is designed to complement the glass door. The flydoor frame is secretly screwed to the main frame. This can be carried out on site if required. The 133mm wide standard perimeter frame has been designed to snap to a large variety of Vantage adaptors including: 180 Door to window vertical couplers. 135 Door to window bay coupler. 90 Door to window box coupler. Heavy duty door highlight couplers. The high water resistance of 450Pa allows these doors to be installed into most residential projects. Meeting stiles fitted with custom end closers that restrict water turbulence under extreme conditions. Square flat faces inside and out. Unused frame recesses are closed off with snap-in flat fillers for improved appearance and water resistance. Standard door rails and stiles will accept glass up to 10.38mm thick or 20mm IGU s using the double glazing stiles and rails. Heavy door panels are fitted with double bogey wheels for smooth long term operation. The flydoor extrusions have been custom designed to match sliding door rail sight lines. Flydoors are fitted with snap-on interlocks again for improved appearance. Type XXF, XFF, XF, XXXF, FXXX, XX, XXX and XXXX doors can be fitted with mortice locks including locks with recessed finger pulls as shown later in these notes. We also offer a large variety of surface locks. Fixed edge panel can be fitted with ClearVENT sashless double-hung inserts. All of the important features are shown in full colour at: PAGE 241

6 STANDARD CONFIGURATIONS OCT 2007 Type 'XF' & 'FX' Single track door Maximum height Maximum width = 2700mm = 3000mm Maximum panel weight 105 Kg. Type 'FXF', 'FFX' & 'XFF' Single track door Maximum height Maximum width = 2700mm = 4500mm Type 'FXXF' Single track door Maximum height Maximum width = 2700mm = 5900mm Type 'FXX' & 'XXF' Double track door Maximum height Maximum width = 2700mm = 4500mm Maximum panel weight 105 Kg. Type 'FXXXXF' Double track door Maximum height = 2700mm Maximum width = 9000mm Width limited by head and sill stock lengths

7 STANDARD CONFIGURATIONS OCT 2007 Type 'FXXX' & 'XXXF' Triple track door Maximum height Maximum width = 2700mm = 6000mm F Maximum panel weight 105 Kg. F F Type 'FXXXXXXF' Triple track door Maximum height = 2700mm Maximum width = 12000mm Note: Head and Sill would have to be spliced when width exceeds 6400mm. F Midrails through doors We offer 57mm and 90mm deep midrails on the single glazed panels. The ClearVENT sashless double-hung shown below can also be fitted over midrails. F F Type 'XC', 'XXC' & 'XXXC' ClearVENT sashless double-hung inserted into fixed panel (sidelight) PAGE 243

8 VERTICAL CROSS SECTION THROUGH XXF DOOR - DOUBLE GLAZED Stainless steel self tapping frame assembly screws. Double weatherpile mohair seals. Custom double glazed stiles & rails Flat filler snaps into unused pockets. This greatly improves the appearance and reduces water penetration. Wrap around PVC glazing channel: Grade 'A' safety glass. 20mm Insulating Glass Unit. CAD file: DWG or DXF VAN 618 Height adjustable heavy duty roller carriage, designed to carry heavy door panels. Double weatherpile mohair seals. Drainage holes protected with co-extruded Santoprene hinging flap mm wide frame Drainage holes into the drainage trough. Tubular sump. Sill tube supported with reinforcing channel. Standard 44mm high sill has been tested to resist 300Pa water. The 50mm performance sill shown lower left has been tested to resist 450Pa water.

9 Horizontal Section through XXF Multi Panel STACKING Door - SINGLE GLAZED Meeting Stile Strength This table shows a range of serviceability ratings (1/150) that can be achieved: Type Height Width Meeting Stiles Code mm mm Light Medium XXF Pa 2007 Pa XXF Pa 1909 Pa XXF Pa XXF Pa CAD file: DWG or DXF VAN_618 The door has been successfully tested to 450Pa water resistance. This makes the product suitable for exposed residential applications. For other sizes/types refer full Pascal rating tables later in this section. Alternative locks : ANDO surface mounted single point deadlock. ANDO surface mounted two point deadlock. Mortice lock with raised ICON pull handles. Mortice lock with recessed ICON finger pulls. Mortice lock with recessed ANDO finger pulls. 'Albany' mortice deadlocks two point deadlock. Lock colours: All of the surface locks come in a variety of standard powder coat finishes. Locks can also be supplied in a variety of metal finishes refer your local Vantage sales office or go to our web site. ICON and ANDO raised and recessed pulls are only available in 316 stainless steel. ANDO single point locking Vantage offer a variety of door locking options, Double weatherpile mohair seals. Extruded aluminium flat fillers close off these unused pockets. Stainless steel self tapping frame assembly screws ANDO two point locking ANDO two point slimline locking PAGE 245

10 XXF MULTI PANEL DOOR IN THE OPEN POSITION Clear opening on 'FXX' door approx. 60% of O/A width CAD file: DWG or DXF VAN_618 Lock Options: The MAGNUM doors can be fitted with a variety of locks, as shown on this and previous page. Albany mortice lock with Miro pull handles Albany mortice two point locking Lock stile stands proud of second panel to protect lock. Middle panel cassettes in line with fixed external panel as shown left. Adhesive PVC door stop top and bottom. ICON S.S. Recessed finger pull with mortice lock ICON S.S. Bold pull handles with mortice lock

11 VERTICAL SECTION THROUGH XXXF MULTI PANEL DOOR - SINGLE GLAZED F Stainless steel self tapping frame assembly screws. Double weatherpile mohair seals. Flat filler snaps into unused pockets. This greatly improves the appearance and reduces water penetration. Doors can be single glazed up to 10.38mm and double glazed with up to 20mm IGU s Wrap around PVC glazing channel: Grade 'A' safety glass. CAD file: DWG or DXF VAN 618 Flydoor: On four track doors we offer Centor S1 retractable screens Drainage holes protected with co-extruded Santoprene hinging flap mm wide frame Height adjustable heavy duty roller carriage. Double weatherpile mohair seals. Drainage holes into the drainage trough. Tubular sump. Sill tube supported with reinforcing channel. The 50mm performance sill shown left will resist 450Pa water. Note XXXF (Four Track) only available in 50mm high sill version. PAGE 247

12 HORIZONTAL SECTION THROUGH XXXF MULTI PANEL DOOR - SINGLE GLAZED Lock Options: The four panel doors can be fitted with a variety of locks, some are shown on this page. ANDO two point locking ANDO two point slimline locking CAD file: DWG or DXF VAN_618 Flydoor: On four track doors we offer Centor S1 retractable screens ICON S.S. Bold pull handles with mortice lock

13 VERTICAL SECTION THROUGH XXF MULTI PANEL FLYDOOR Spring loaded flydoor wheel fixed to top rail. The wheel can be adjusted via screw on the inside to reduce door vertical movement. Screen frame insert. Spring loaded flydoor wheels in bottom rail are height adjusted using the internal adjustment screw. Support the door weight while adjusting the height. Screen door sightline lines through CAD file: DWG or DXF VAN_ PAGE 249

14 HORIZONTAL SECTION THROUGH XXF MULTI PANEL DOOR WITH FLYDOORS The custom flydoor stiles line through with glass door stiles. Vantage custom flydoors come with snap-on door interlocks. CAD file: DWG or DXF VAN_618 Vantage custom flydoor frame.

15 SILL INSTALLATION DETAILS Secure sill to structure with countersunk M6 Dynabolts at meeting stile location and 800mm maximum centres. Seal over screw heads Squirt Silicon seal into the screw access hole before fitting the fixing bolts, to reduce water escaping from sump at fixing holes. Most Important: Sill sealed to structure at this location. Alternative type 'P' running rails The type 'P' running rails are designed so that when they are toe to toe they space the flydoors to suit head and jambs. Drainage recess, leave 9mm gap. Sill also drains into the sump. Sump with adequate drainage system (by builder) PAGE 251

16 DESIGN FEATURES - S1 RECTRACTABLE SCREEN By far the largest and most robust retractable screening system on the market. The detail in this section show the screen fitted behind Magnum sliding door. The screen can be fitted to any of the Magnum door configurations including the maximum opening 'XXXF' and 'FXXXXXXF' doors up to 7400mm wide. The S1 screen frame can be coloured to match the Magnum sliding door frame. Load Balancing Technology (LBT ) (patent pending) allows for the sort of effortless fingertip control. With no spring-loading to fight against, the screen's lead-stile remains firmly in any chosen position until further pressure is applied. Load-balancing also means far greater mesh tension across the screen, eliminating any tendency to sag. Tight Technology manufacturing techniques ensure control of the horizontal edges of the screen so they remain straight and tight across the widest spans. A shock absorption system allows visitors taken in by the screen's unobtrusiveness and near invisibility to walk away with no more than a surprise - and no system damage. Should strong winds blow the screen out of the top or bottom channels the mesh will self-feed back onto the roll as it is rolled away. S1 is manufactured in stainless steel and reinforced engineered polymers. PetScreen Lite, the tough PVC coated polyester mesh used in the screen, is hard wearing and resistant to damage from pets and children. The mesh is easy to clean and can be replaced (service call required). The S1 screen system has undergone cyclic testing to 400,000 operations in a laboratory and been extensively exposed to dust, mud, sand and corrosive atmosphere to ensure it is a product for the real world. It has stood up to impact testing with a 17kg punching bag 100 times, wind testing to 20kph and considerable pushing, poking and prodding to simulate real life usage. Easy to install as the screen kit arrives in cardboard boxes after being factory cut to the finished sizes. Large size screens available 3000mm high x 3700mm wide single or 7400mm wide double bi-parting screens. Screen Maintenance Screen fabric should be cleaned with a soft brush or a damp soft cloth. Tracking should be regularly cleaned to prevent the build-up of dirt and debris. A vacuum cleaner fitted with a nozzle is effective. Operating mechanisms are fully contained and do not require maintenance other than keeping clear of dirt and debris.

17 TYPICAL VERTICAL CROSS SECTION - S1 RECTRACTABLE SCREEN Important Note: The wall is 289mm thick excluding the internal wall lining Steel lintel/s designed to carry structure over. 39 Gyprock secured to header with fast grab flexible sealant. Leave 12mm gap between timber/steel lintel to allow for settlement. Gyprock NOT bonded to the flydoor head. Screw fix screen head to door through pre-drilled holes in screen head channel and door main head. Architrave secured to Gyprock with fast grab flexible sealant. Not secured to the flydoor head channel (allow to slip) Clearance 12 Frame Height H 44 T3 (three track) Frame types: 'XXF', 'FXXXXF', 'XXX' and 'XXXXXX' detail also applies to type 'XF', FXF' and 'FXXF' doors that use the T3 frame. Retractable screens can be fitted to any of the sliding doors up to 7400mm wide. Important Note: The details on this page show the standard 44mm sill. 44mm Sill Sliding doors can't support the weight of the structure over. Lintels and headers must be capable of supporting the weight of wall and roof over. Centor S1 Screening system. Maximum screen frame width: Single = 3700mm Double = 7400mm Pack and screw Centor flyscreen sill to structure with the top aligning with the adjoining glass door sill O/A Screen Height = H + 36 Stud Opening Height = H Seal main door frame to structure in this area before fitting the screen sill. Stepped Sill Detail PAGE 253

18 TYPE 'XXF' WITH S1 RECTRACTABLE SCREEN - <= 3700mm WIDE type 'XXF', 'XF' & 'XFF' door Glass door frame width 95 <= 3578mm Flush jamb also applies to door types 'FXF', 'FXXF' & 'FXXXXF'. Gyprock secured to stud wall and flydoor jamb with fast grab flexible sealant. Flydoor jamb secured to stud with aluminium fixing lugs and double sided tape, lugs supplied with flydoor kit Flydoor jamb secured to main frame with double side tape. 10 Architrave secured to Gyprock with fast grab flexible sealant. Don't screw fix architrave or wall lining into the Centor flydoor jamb box as this could damage the screening. IMPORTANT NOTE: When you use the single flydoor system on a single direction glass door where the glass door lock is on the jamb as detailed left. The screen frame aligns with the main glass door frame. You will have access to the lock cylinder as the screen door moves into the open position. Frame Width W Setback O/A Screen Width = W Stud Opening Width = W If the overall screen width exceeds 3700mm you must use a double screen frame and rebate the screen jambs as shown on following page. Centor S1 Screening system. Maximum single screen frame width: Single = 3700mm therefore the Maximum glass door frame width: With single screen = 3578mm Don't screw fix architrave or wall lining into the Centor flydoor jamb box as this could damage the screening. Create a rebate in the inner stud wall to accept the flydoor box as detailed. Fit timber spacer to create a fixing point for the main glass door leaving 10mm gap for adjustment and shimming. Fix main frame to the spacer 450mm max. cts. The conventional 250mm brick veneer wall has been thickened up (39mm) on the inner face to accept the flydoor system. If the external wall is 240mm add 49mm packing to the inner face to bring the overall wall thickness back to 289mm. 289 scale: not to scale

19 TYPE 'XXF' WITH S1 RECTRACTABLE SCREEN - > 3700mm WIDE 95 type 'XXF', 'XF' & 'XFF' door Glass door frame width > 3578mm Gyprock secured to stud wall and flydoor jamb with fast grab flexible sealant. Flydoor jamb secured to stud with aluminium fixing lugs and double sided tape, lugs supplied with flydoor kit Architrave secured to Gyprock with fast grab flexible sealant. Don't screw fix architrave or wall lining into the Centor flydoor jamb box as this could damage the screening. IMPORTANT NOTE: When you use the double flydoor system on a single direction glass door where the glass door lock is on the jamb as detailed left. The screen frame must be rebated as detailed to allow access to the glass door internal lock cylinder. Frame Width W O/A Screen Width = W Stud Opening Width = W Setback Screen door stile in the open position. Centor S1 Screening system. Maximum double screen frame width: Double = 7400mm This situation does not occur on bi-parting glass doors ('FXXXXF' and 'FXXF') with a double screen system Don't screw fix architrave or wall lining into the Centor flydoor jamb box as this could damage the screening. Create a rebate in the inner stud wall to accept the flydoor box as detailed. Fit timber spacer to create a fixing point for the main glass door leaving 10mm gap for adjustment and shimming. Fix main frame to the spacer 450mm max. cts. The conventional 250mm brick veneer wall has been thickened up (39mm) on the inner face to accept the flydoor system. If the external wall is 240mm add 49mm packing to the inner face to bring the overall wall thickness back to 289mm. 289 PAGE 255

20 TYPE 'XXX' WITH S1 RECTRACTABLE SCREEN - <= 3700mm WIDE type 'XXX' door Glass door frame width <= 4806mm Flush jamb also applies to door type 'XXXXXXXX'. 95 Gyprock secured to stud wall and flydoor jamb with fast grab flexible sealant. Flydoor jamb secured to stud with aluminium fixing lugs and double sided tape, lugs supplied with flydoor kit. Frame Width W Wall Opening Width = W * Setback 61 O/A Screen Width = W * Stud Opening Width = W * Main Frame Stud Opening Width = W + 81 Flydoor jamb secured to main frame with double side tape. Architrave secured to Gyprock with fast grab flexible sealant. Don't screw fix architrave or wall lining into the Centor flydoor jamb box as this could damage the screening. IMPORTANT NOTE: When you use the single flydoor system on a single direction glass door where the glass door lock is on the jamb as detailed left. The screen frame aligns with the main glass door frame. You will have access to the lock cylinder as the screen door moves into the open position. On type 'XX' door the limitation on glass door width is less than the maximum width on a singe flydoor frame. So you won't need a double screen. Centor S1 Screening system. Maximum single screen frame width: Single = 3700mm therefore the Maximum glass door frame width: With single screen = 4806mm Wall Width = W/ Build the external cover wall and clad as required. We have drawn the external brick skin at a standard 115mm thick, if this was thicker the cover wall could also be constructed in brick Ext. Wall Width = W/4-180 Don't screw fix architrave or wall lining into the Centor flydoor jamb box as this could damage the screening. Flydoor jamb secured to stud with aluminium fixing lugs and double sided tape, lugs supplied with flydoor kit. Build 80mm maximum thick stud wall on the inside, positioned as detailed. Fix main frame to the stud 450mm max. cts. The conventional 250mm brick veneer wall has been thickened up (39mm) on the inner face to accept the flydoor system. If the external wall is 240mm add 49mm packing to the inner face to bring the overall wall thickness back to 289mm. 289 scale: not to scale

21 TYPE 'XXX' WITH S1 RECTRACTABLE SCREEN - > 3700mm WIDE type 'XXX' door Glass door frame width > 4806mm 95 Gyprock secured to stud wall and flydoor jamb with fast grab flexible sealant. Frame Width W Wall Opening Width = W * Setback 101 O/A Screen Width = W * Stud Opening Width = W * Screen door stile in the open position. Main Frame Stud Opening Width = W Flydoor jamb secured to stud with aluminium fixing lugs and double sided tape, lugs supplied with flydoor kit. Architrave secured to Gyprock with fast grab flexible sealant. Don't screw fix architrave or wall lining into the Centor flydoor jamb box as this could damage the screening. IMPORTANT NOTE: When you use the double flydoor system on a single direction glass door where the glass door lock is on the jamb as detailed left. The screen frame must be rebated as detailed to allow access to the glass door internal lock cylinder. Centor S1 Screening system. Maximum double screen frame width: Double = 7400mm This situation does not occur on bi-parting glass doors ('XXXX' and 'XXXXXX) with a double screen system. Wall Width = W/ Build the external cover wall and clad as required. We have drawn the external brick skin at a standard 115mm thick, if this was thicker the cover wall could also be constructed in brick Ext. Wall Width = W/4-180 Don't screw fix architrave or wall lining into the Centor flydoor jamb box as this could damage the screening. Flydoor jamb secured to stud with aluminium fixing lugs and double sided tape, lugs supplied with flydoor kit. Build 80mm maximum thick stud wall on the inside, positioned as detailed. Fix main frame to the stud 450mm max. cts. The conventional 250mm brick veneer wall has been thickened up (39mm) on the inner face to accept the flydoor system. If the external wall is 240mm add 49mm packing to the inner face to bring the overall wall thickness back to 289mm. 289 scale: not to scale PAGE 257

22 TYPICAL VERTICAL CROSS SECTION - S1 RECTRACTABLE SCREEN Gyprock secured to header with fast grab flexible sealant. Important Note: The wall is 320mm thick excluding the internal wall lining Leave 12mm gap between timber/steel lintel to allow for settlement. Gyprock NOT bonded to the flydoor head. Steel lintel/s designed to carry structure over. Screw fix screen head to door through pre-drilled holes in screen head channel and door main head. Architrave secured to Gyprock with fast grab flexible sealant. Not secured to the flydoor head channel (allow to slip). Clearance Clearance Frame Height H 50 6 T4 (four track) Frame types: 'XXXF', 'FXXXXXXF', 'XXXX' and 'XXXXXXXX' Sliding doors can't support the weight of the structure over. Lintels and headers must be capable of supporting the weight of wall and roof over. Centor S1 Screening system. Maximum screen frame width: Single = 3700mm Double = 7400mm Pack and screw Centor flyscreen sill to structure with the top aligning with the adjoining glass door sill O/A Screen Height = H + 30 Stud Opening Height = H Seal main door frame to structure in this area before fitting the screen sill. Stepped Sill Detail

23 TYPE 'XXX' WITH S1 RECTRACTABLE SCREEN - > 3700mm WIDE 95 type 'XXXF' & 'FXXX' door Glass door frame width Gyprock secured to stud wall and flydoor jamb with > 3578mm fast grab flexible sealant. Flydoor jamb secured to stud with aluminium fixing lugs and double sided tape, lugs supplied with flydoor kit Setback Screen door stile in the open position. Architrave secured to Gyprock with fast grab flexible sealant. Don't srew fix architrave or wall lining into the Centor flydoor jamb box as this could damage the screening. IMPORTANT NOTE: When you use the double flydoor system on a single direction glass door where the glass door lock is on the jamb as detailed left. The screen frame must be rebated as detailed. to allow access to the glass door internal lock cylinder. Frame Width W O/A Screen Width = W Stud Opening Width = W Centor S1 Screening system. Maximum double screen frame width: Double = 7400mm This situation does not occur on bi-parting glass doors ('FXXXXF' and 'FXXF') with a double screen system Don't screw fix architrave or wall lining into the Centor flydoor jamb box as this could damage the screening. Create a rebate in the inner wall to accept the flydoor box as detailed. Fit timber spacer to create a fixing point for the main glass door leaving 10mm gap for adjustment and shimming. Fix main frame to the spacer 450mm max. cts. The conventional 250mm brick veneer wall has been thickened up (39mm) on the inner face to accept the flydoor system. If the external wall is 240mm add 49mm packing to the inner face to bring the overall wall thickness back to 289mm. PAGE 259

24 HORIZONTAL SECTION THROUGH XF GLASS DOOR Meeting Stile Strength This table shows a range of serviceability ratings (1/150) that can be achieved: type Height Width Meeting Stiles code mm mm Light Medium Heavy XF Pa 1875 Pa 3000 Pa XF Pa 2200 Pa XF Pa 2200 Pa The door has been successfully tested to 450Pa water resistance. This make the product suitable for exposed residential applications. For other sizes/types refer full Pascal rating tables later in this section. CAD file: DWG or DXF VAN_618 Alternative locks : ANDO surface mounted single point deadlock. ANDO surface mounted two point deadlock. ANDO mortice lock with recessed finger pull. 'Albany' mortice deadlocks two point deadlock. Lock colours: All of these locks come in a variety of standard powder coat finishes. Locks can also be supplied in a variety of metal finishes refer your local Vantage sales office or go to our web site. ANDO single point locking Important Feature Light meeting stile combinations don't project inside past the frame line. Double weatherpile mohair seals. Vantage offer a variety of door locking options, Double weatherpile mohair seals. Extruded aluminium flat fillers close off these unused pockets. Stainless steel self tapping frame assembly screws ANDO two point locking ANDO two point slimline locking ANDO mortice with recessed finger pulls

25 90 CORNER MEETING STILES MAGNUM 618 Doors can be supplied as a corner unit that will open away from the corner (as illustrated right). One door can be opened for every day access. One side could be opened depending on the wind direction. Both sides opened when required for maximum access. Can be configured as FX-XF, FXX-XXF, FXXX-XXXF Waterproof Corner Stiles The corner stiles have been designed to look good and acheive maximum weather performance. No unsightly holes at the top and bottom. PAGE 261

26 MEETING STILE PASCAL RATINGS Scale: HALF FULL SIZE XF & FX FXF FXXF Door Meeting stiles type Height Width Light Medium Heavy with with with mm mm S U S U S U XF XF XF XF XF XF XF XF XF XF XF XF FXF FXF FXF FXF FXF FXF FXF FXF FXF FXF FXF FXF FXF FXF FXF FXXF FXXF FXXF FXXF FXXF FXXF FXXF FXXF FXXF FXXF FXXF FXXF Wind Ratings (Pa) Meeting stiles. FXXF Heavy Meeting Stiles: The above table shows no increase with the heavy meeting stile combination on FXXF doors as the limitation is the central biparting combination and this only comes in the medium strength arrangement. Light With with Ixx = 269 x 10 3 mm 4 Medium With with Ixx = 887 x 10 3 mm 4 Heavy With with Ixx = 1506 x 10 3 mm 4 Important Note: If you use the heavy meeting stile combination, flydoors can't be fitted within the main frame. The serviceability ratings over 2200Pa are only available when using the performance 50mm high sill (42303).

27 MEETING STILE PASCAL RATINGS S = Serviceability limit state (deflection = L/150). U = Ultimate strength limit state (factored yield strength = 104 MPa). Scale: HALF FULL SIZE FXX & XXF These tables have been calculated using nominal section properties. A typical assembly has been tested as per the requirements of AS2047, Ultimate strength rating has been limited to 4500 Pa, 50% higher than the highest serviceability number nominated Serviceability ratings were restricted by the maximum water resistance (450Pa) achieved on panels up to 1320mm wide equates to 4000mm wide XXF or 2710mm wide XF doors Serviceability ratings were restricted by the maximum water resistance (300Pa) achieved on extra wide door panels. Blank Denotes rating under 700 Pa. FXXXXF Door Meeting stiles type Height Width Light Medium Heavy with with with mm mm S U S U S U XXF XXF XXF XXF XXF XXF XXF XXF XXF XXF XXF XXF XXF XXF XXF FXXXXF FXXXXF FXXXXF FXXXXF FXXXXF FXXXXF FXXXXF FXXXXF FXXXXF FXXXXF FXXXXF FXXXXF FXXXXF FXXXXF FXXXXF FXXXXF FXXXXF FXXXXF Wind Ratings (Pa) Meeting stiles. FXXXXF Heavy Meeting Stiles: The above table shows no increase with the heavy meeting stile combination on FXXXXF doors as the limitation is the central biparting combination and this only comes in the medium strength arrangement. Light With with Ixx = 269 x 10 3 mm 4 Medium With with Ixx = 887 x 10 3 mm 4 Heavy With with Ixx = 1506 x 10 3 mm 4 Important Note: If you use the heavy meeting stile combination, flydoors can't be fitted within the main frame. PAGE 263

28 MEETING STILE PASCAL RATINGS Scale: HALF FULL SIZE S = Serviceability limit state (deflection = L/150). U = Ultimate strength limit state (factored yield strength = 104 MPa). These tables have been calculated using nominal section properties. A typical assembly has been tested as per the requirements of AS2047, Ultimate strength rating has been limited to 4500 Pa, 50% higher than the highest serviceability number nominated. FXXX & XXXF F 3000 Serviceability ratings were restricted by the maximum water resistance (450Pa) achieved on panels up to 1320mm wide equates to 4000mm wide XXF or 2710mm wide XF doors Serviceability ratings were restricted by the maximum water resistance (300Pa) achieved on extra wide door panels. Blank Denotes rating under 700 Pa. F FXXXXXXF F Door Meeting stiles type Height Width Light Medium Heavy with with with mm mm S U S U S U XXXF XXXF XXXF XXXF XXXF XXXF XXXF XXXF XXXF XXXF XXXF XXXF XXXF XXXF XXXF FXXXXXXF FXXXXXXF FXXXXXXF FXXXXXXF FXXXXXXF FXXXXXXF FXXXXXXF FXXXXXXF FXXXXXXF FXXXXXXF FXXXXXXF FXXXXXXF FXXXXXXF FXXXXXXF FXXXXXXF FXXXXXXF FXXXXXXF FXXXXXXF Wind Ratings (Pa) Meeting stiles. FXXXXXXF Heavy Meeting Stiles: The above table shows no increase with the heavy meeting stile combination on FXXXXF doors as the limitation is the central bi-parting combination and this only comes in the medium strength arrangement. Light With with Ixx = 269 x 10 3 mm 4 Medium With with Ixx = 887 x 10 3 mm 4 Heavy With with Ixx = 1506 x 10 3 mm 4 Important Note: If you use the heavy meeting stile combination, flydoors can't be fitted within the main frame.

29 MORTICE LOCKS We offer a premium locking option Iseo mortice lock with D or recessed finger pulls. All three handle and finger pull options are only available in marine grade 316 stainless steel. ICON S.S. Bold pull handles with mortice lock ICON S.S. Recessed finger pulls with mortice lock ANDO S.S. Recessed finger pulls with mortice lock Important Note: On heavy doors we recommend the raised pull handle shown far left. PAGE 265

30 MULLION COUPLER Scale: HALF FULL SIZE MAGNUM fixed frame illustrated Seal coupler to frame at nailing fin position with closed cell foam tape. MAGNUM sliding door Fit snap-on cover trim after coupling frames to 'I' coupler. O/A Window Width 2 O/A Door Width MAGNUM fixed frame illustrated Seal coupler to frame at nailing fin position with closed cell foam tape. Alternative Coupler: Box coupler can also be used vertically in lieu of shown right MAGNUM sliding door O/A Window Width 50 O/A Door Width

31 TRANSOM COUPLER 32 O/A Window Height 50 O/A Window Height O/A Door Height Seal coupler to frame at nailing fin position with closed cell foam tape. 50 O/A Door Height MAGNUM sliding door MAGNUM sliding door Magnum fixed frame illustrated Magnum fixed frame illustrated Scale: HALF FULL SIZE Frame Heights Transom Width Window Door Ratings (Pa) mm mm mm S U Frame Heights Transom Width Window Door Ratings (Pa) mm mm mm S U PAGE 267

32 Optional ClearVENT INSERT Scale: half full size ClearVENT insert fitted into door panel with custom inlay adaptor. Notes: * ClearVENT adaptor can be fitted into MAGNUM sliding door fixed panels as shown on this page. * The width of the adaptor and therefore the overall door unit will be limited by the maximum width of ClearVENT. As shown on the table the width varies depending on wind load and glass type selected. * ClearVENT has been tested to resist 300Pa water. * External sliding flydoors can't be fitted to doors fitted with ClearVENT as the adaptor frame would clash with flydoor. * The flyscreen version of ClearVENT we also offer an alternative head and jamb insert frame that is narrower and won't accept flyscreens (refer Series 614 ClearVENT ). * Doors fitted with ClearVENT inserts won't accept the standard external sliding flydoor systems shown earlier, however Centor S1 retractable screens can be fitted. Glass Performance of ClearVENT sashes: The weak link on frameless double-hung sashes will be the unsupported glass edge across the centre of the window. The situation is covered in Australian Standard AS Typical window examples based on this Standard Maximum Window Width (based on 30mm frames and 72823) Wind Classification 6mm Annealed Glass 5mm Toughened Glass 6mm Toughened Glass 6.38mm Laminated Glass N1 1210mm 1210mm 1210mm 1210mm N2 1210mm 1210mm 1210mm 1210mm N3 1067mm 1186mm 1210mm 1037mm N4 904mm 1036mm 1186mm 880mm N5 763mm 886mm 1036mm 744mm N6 679mm 859mm 995mm 662mm Refer Series 614 for other areas.

33 MAGNUM 618 WITH ClearVENT Scale: HALF FULL SIZE Type 'CX' Sliding Doors The ClearVENT window can be fitted into the sidelight of sliding doors. type 'CX' shown above also available as: 'XC', CXXC, CXX, & XXC. The window requires grade 'A' safety glass. Window can be fitted with flyscreen as shown left. Maximum water resistance rating on this unit would be 300Pa. CAD file: DWG or DXF VAN_618 Go to our web site for details: Residential sliding door section. PAGE 269

34 XX HORIZONTAL SECTION - CLOSED Scale: half full size Unused jamb recess closed off with snap-in flat fillers. Weatherpile seal both sides on jambs. Standard ANDO two point lock illustrated. Grade 'A' safety glass. Moving panel meeting stile end cap. Weatherpile seals. Moving panel meeting stile end cap.

35 Scale: NOT TO SCALE XX HORIZONTAL SECTION - OPEN 46 O/A Width = W Clear Opening = W Moulded nylon threshold end caps. ANDO Slimline lock illustrated. Adhesive buffer stops fitted to meeting stile end caps top and bottom. This stops the doors in the correct position and protects the metal finish. Note: There are numerous ways of creating stack away doors. On these and the previous pages we have shown two examples. PAGE 271

36 Scale: half full size XXX HORIZONTAL SECTION - CLOSED Unused jamb recesses closed off with snap-in flat fillers. Weatherpile seal both sides on jambs. Standard ANDO two point lock illustrated. Moving panel meeting stile end cap. Grade 'A' safety glass. 10 Weatherpile seals. Moving panel meeting stile end cap. Weatherpile seal. Weatherpile seal. Moving panel meeting stile end cap. Interlocker secure to wall.

37 Scale: NOT TO SCALE XXX HORIZONTAL SECTION - OPEN 46 Note: We also offer type XXXX cavity doors Clear Opening = (W *0.75) -252 Moulded nylon threshold end caps. O/A Width = W ANDO Slimline lock illustrated. 132 Adhesive buffer stops fitted to meeting stile end caps top and bottom. This stops the doors in the correct position and protects the metal finish. Note: There are numerous ways of creating stack away doors. On these and the previous pages we have shown two examples. PAGE 273