Air Infiltration The amount of air leaking in and out of a building through cracks in walls, windows, and doors.
|
|
- Blaise Cole
- 5 years ago
- Views:
Transcription
1 Air Infiltration The amount of air leaking in and out of a building through cracks in walls, windows, and doors. Aluminum Clad Sill Heavy extruded aluminum over wood that provides a long lasting, weatherproof sill for StrongArm II Entry Doors Angled Welding Shaped windows of angles greater or less than 90 degrees are all fusion welded for strength, weather seal, and durability Arctic Vinyl Threshold Provides the ultimate long lasting thermal break for both the inswing and outswing sills. Argon A colourless, odourless, non-flammable, non-reactive, inert gas which acts as an insulator between the panes of glass in a sealed unit. Astragal The center member of a double door, which is attached to the fixed or inactive door panel. Awning Window An operating style of window with a sash hinged on the top, and swings open at the bottom towards the exterior. Balance A mechanical device, normally spring loaded, used in hung windows to counterbalance the width of the sash during opening and closing. Bay Window A three-unit combination window consisting of central picture or fixed window and flanked by a pair of windows set at an angle (usually 45 degrees).
2 Bow Window A type of window consisting of four or more window units attached at an angle to give an impression of a curve. Brickmould Decorative perimeter or border that encases the entire window and is visible from the outside of the house. Camlocks Locks sash to frame for air tightness and security. (One or two per casement, depending on height; two per awning). Casement Window An operating style of window with a side-hinged sash that opens from the side towards the exterior. Casing Molding of various widths, thickness and shapes applied to the framework of window and door units. Caulking A sealant used to seal construction joints, in order to prevent water and air infiltration. Centre of Glass Area (COG) The central area of a sealed unit making up 80 per cent of the glass area. Cladding An aluminum material locked to the outside faces of many products to provide a durable, low-maintenance exterior surface. Combination Window A combination of two or more complete window assemblies of the same or different types that are mulled or welded (v-weld) together.
3 Condensation Moisture formation on surfaces due to cold temperatures, high humidity levels, and poor airflow. Conduction A process of heat transfer whereby heat moves directly through a material by molecule agitation. Dew Point The temperature at which water vapour will condense as warm, moist air is cooled. Double Hung Window An operating style of window with an upper sash that slides down, and a lower sash that slides up. Drip Cap or Flashing A molding placed on the top of the brickmould or casing of a window frame. Dry Glazing A method of securing glass in a window frame with a dry, resilient gasket, without the use of a glazing component. Dual Pane An insulated glass unit consisting of two panes of glass held together by a sealant and a spacer bar. Edge of Glass The area within 10cm (2.5 ) of the edge surrounding the perimeter of the glass. Egress The space in which the operating part of the window requires clearance for fire regulations.
4 Elliptical Window Curved top half window that does not form a half circle since the curvature is less. Nor does the arch come down to the sill, but meets with vertical sides. Emissivity The rate at which a surface of a material radiates long-wave heat energy, usually referring to glass surface properties. Low emissivity results in less overall heat loss. Extended Half Round and Elliptical Window The sides extend to various heights beyond the curvature of the top. Extension Jambs Flat wood or PVC parts that are applied to the inside of the frame to extend it in width, which allows the frame to adapt to a thicker wall. (6 ½ or other special widths). Exterior Glazed Glass installed from the exterior side of the window. Finseal Weatherstripping A brush type weatherstripping that has a plastic mylar fin centred in the pile. Mainly used with sliders. Fixed Unit A stationary window or door unit that does not open. Flashing A thin strip of metal or synthetic material that diverts water away from a window or skylight. Flushbolts and Astragal Where a double door is desired that will have no restricting post when both doors are open. This movable, weather-stripped post is attached to one door and locked to the head and sill with flush bolts.
5 Frame The enclosing box of a window or door that surrounds a sash or sealed unit, consisting of a head, sill and two jambs. French Door Hinged door available in one, two, three, or four-wide combinations with up to two panels operating. Fusion Welded Corners (PVC) Equal to the extruded frame. 100% air and water tight. All frames and sash are constructed in this fashion in automated machines to produce a perfectly square frame every time. Garden Door Available two or three-wide, one panel operates as a door while the other panel opens window-style and comes complete with screen. On three-wide units the third panel is fixed. Glazing (1) The generic term for the transparent, or sometimes translucent, material in a window or a door. It is most often glass. Glazing Stop Used to hold the glass into the frame. Glazing/Glazed (2) Is the process of installing a sealed unit into a frame or sash using stops. Also refers to the type of glass used to make the sealed unit. Glider An operating style of window that has a sash which slides horizontally to open.
6 Grilles (Muntin bars) Dividing bars or muntins, used either on the surface or between panes of glass for a decorative appearance. Half Round Window True half round where the arch comes right down to the sill. The height is half the width. Head The top portion of a window or door frame. Head and Seat Attached to the top and bottom of a Bay or Bow window as an option where the wall is NOT framed to follow the angle of the window. Hopper A window unit in which the top of the sash swings inward. Inside Casing Available for half rounds or other curved top windows in laminated pine or oak. Insulated Glass Unit (IG or IGU) A combination of two or more panes of glass factory sealed using a spacer bar. Also known as a sealed unit. Integral Nailing Fin A prepunched fin that is part of the extrusion which allows for easy installation. Interior Glazed Glass installed from the interior of the building. Interlocking Mullion and Sash Where the sash joins the centre of the fixed mullion the two are drawn together by a beveled interlock that is double weather-stripped.
7 Jamb The side components of a window or door frame. Jamb Wrap (Painted Metal) Applied on the jamb between the brickmould and weatherstrip of a door frame. Lite Single pane of glass. Low-E Glass A type of glass consisting of a low emissivity coating on one side. A low emissivity coating significantly reduces heat loss in glazing combinations. Mortise A slot or rectangular cavity cut into a piece of wood to receive another part. Mortise & Tenon Joint Used at the corner of a wood sash to give strength and prevent sagging. Glued and machine squared for perfect fit in frame. Mullion An extrusion that joins windows. A sealant is applied between the units to prevent air and water leakage. A bullnose or profiled moulding is used on the inside and outside to cover this joint. Mullion Cover An extrusion that joins panning perimeter legs that extend over existing mullions. Multi-lock One camlock lever at the bottom operates multiple locking points to secure the sash to the frame.
8 Nailing Fin A vinyl or metal flange integrated into (or attached to) the perimeter of a window frame for insulation onto the rough opening header, jack studs and rough sill. Operator Refers to a door or a window that has an operable sash or panel that opens to allow passage or ventilation. Patio Door A sliding door comprising of a panel fitted with an insulated sealed unit, with one operating panel sliding horizontally to provide passage. Available in two, three and four wide units. Picture Window A type of window in which a sealed unit is glazed directly into window frame, without a sash. Polyurethane Core Doors are foam injected for high insulating value R15 R-Value A term used to express the insulating values of a material or unit. A higher R-value results in a better insulating properties. R-value is the inverse of the materials U-value. (R=1/U). Reinforced Steel Comes in flat or tubular form that is completely enclosed in the vinyl frame for very large window combinations to structurally enhance the window. Relative Humidity Humidity expressed as a percentage of the maximum possible humidity at a given temperature.
9 Rough Opening The opening built into a frame wall to receive a window or door unit. Sash A sub frame component that surrounds a sealed unit. A sash can be either fixed (nonoperating) or operating. Sash Balance A coiled spring or spiral system integrated into the jamb liners to allow double hung or single hung sashes to open and close. Sealant Hot melt butyl between glass and sash for air and water tight seal every time. Sealed Unit A combination of two or more panes of glass factory sealed using a spacer bar. Also known as a insulating glass unit (IGU). Shims Rubber setting blocks used to position the glass into the window to ensure it is level, square and plumb. Sidelite A narrow fixed or operating unit joined to the side of a door frame combination. Sill The bottom component of a door or window frame. Sill Track Snap-in extruded vinyl, covers drain holes and provides platform for sash rollers to roll on.
10 Simulated Dividing Lites (SDL) A decorative bar mounted on the exterior and interior of a sealed unit to provide the visual affect of dividing the glass into smaller units. Single Hung (Vertical) An operating style of window, with fixed top panel and a lower sash that slides up vertically. Skylight A window designed especially for roof installation, usually to provide natural light to interior building areas. Slider A type of window with one fixed sash, and one or two that slides sideways. Also known as a glider. Solar Heat Gain Coefficient (SHGC) The measure of how much solar heat gain energy a glass combination will allow to pass through. A higher SHGC allows more potential solar heat gain than a lower SHGC (see SunStop.) Solar Transmittance The percentage of total solar energy that glazing transmits through a window. Sound Transmission Class (STC) A rating measure for the ability of glazing to block out sound from outside sources. Spacer Bar The strip of material that maintains uniform separation between the layers of glass in the sealed unit of the window. Stops A window component that holds the sealed unit into a frame or sash.
11 SunStop A special Low-E coating designed to reduce the solar heat gain coefficient of glazing. SunStop glazing reduces UV rays, excessive solar heat gain, improves the R-Value, and allows a high percentage of visible light transmittance. Thermal Break A space or insulating material used to break highly conductive materials, to reduce heat transfer. Transom A window unit combined to the top of a window or door frame. Tri-pane A sealed unit consisting of three panes of glass separated with two spacer bars. U-Value A measurement of heat transmission (see R-Value.) Visible Light Transmittance The percentage of visible light that is transmitted through a glazing combination. The type of sealed unit, coatings and tints will affect the percentage of visible light transmittance. Weatherstripping A material used to create an air or water seal between operating components of a window or door. Wind Load The amount of pressure exerted by the wind on a window or door generally expressed in pounds per square foot.
WINDOW INSTALLATION GUIDE
WINDOW INSTALLATION GUIDE SAWDAC is not responsible for or liable for any use or misuse of the information contained in this window installation guide. Window Installation Guide This guide provides basic
More informationWindow Parts and Styles
CORE WEB BASED CORE APPLICATION SPECIFIC INSTALLATION INFORMATION AND METHODS Photo courtesy of Building-Products.com Window Parts and Styles Although all possible measures have been taken to insure the
More informationabout us PLYGEM
offerings 4415 Pheasant Ridge Rd., Suite 00, Roanoke, VA 24014 about us It s more than a window. It s a whole new point of view. At Ply Gem Windows, we have a different view for the way the window business
More informationSliding Glass Door Assembly and Installation Guide
Sliding Glass Door Assembly and Installation Guide Index Door System Components and Hardware The following components are needed to complete the installation of your Sliding Patio Door unit. Check all
More informationHH Windows & Doors German engineered. American made. the horizontal pivot window
HH Windows & Doors German engineered. American made. the horizontal pivot window 1 Table of contents Key features Sizing Configurations Section drawings Muntins and stops Plane of installation Interior
More informationSeries 9000 Vinyl Single Hung
Series 9000 Single Hung Series 9000 Vinyl Single Hung Contents List of Architectural Drawings...9000SH - 3 Elevations - Single Hung...9000SH - 4 Available Sizes - Single Hung...9000SH - 5 Elevations -
More informationArchitectural detail manual Double-Hung window DF3604
MATERIALS Extruded vinyl profiles comply with the performance requirements of AAMA 303-97. Color is White. FRAME All frames are assembled utilizing fusion-welded technology for added strength and durability.
More informationDF COLLECTION. Architectural Detail Guide Double-Hung Window DF 3604 TABLE OF CONTENTS
DF COLLECTION Architectural Detail Guide Double-Hung Window DF 3604 TABLE OF CONTENTS Specifications... 8-2 Quick Spec Guide... 8-3 General Information Other Split Options... 8-5 Multiple Assemblies...
More informationVINYL REPLACEMENT WINDOW INSTALLATION STANDARDS
VINYL REPLACEMENT WINDOW INSTALLATION STANDARDS BEFORE you start to remove the existing windows Place clean drop cloths in all work areas. Re-measure the opening to ensure the new window will fit. Remove
More informationSeries 9000 Vinyl Horizontal Slider
Series 9000 Horizontal Slider Series 9000 Vinyl Horizontal Slider Contents List of Architectural Drawings...9000HS - 3 Elevations - XO or OX...9000HS - 4 Available Sizes - XO or OX...9000HS - 5 Elevations
More informationSun Windows General Information New Construction Hinged Door Installation Instructions
A G H F H H A. Apply Weather Resistive Barrier B. Apply Bottom Flashing Tape C. Install Sill Pan End Caps & Pan D. Caulk Sides & Top Nailing Surface, Set Door, Fasten E. Apply Side Flashing Tape F. Apply
More informationCUSTOM VINYL WINDOWS
CUSTOM VINYL WINDOWS working smarter to make Why ACAN? SUPERIOR IN-HOUSE EXTRUSION ACAN designs and extrudes profiles in-house from upvc material to secure consistent quality from the start, to offer its
More informationJAMESTOWN175 SERIES Fixed, Projected and Casement Steel Windows
Fixed, Projected and Casement Steel Windows Hope s Jamestown Series steel windows are manufactured from heavy custom hot-rolled steel profiles. All frames, ventilators and muntin bars are -/" in depth.
More informationInnovative Leading in Glass. Glass glossary
Glass glossary Innovative Leading in Glass Acrylic A type of thermoplastic, sometimes used for glazing. Good weather resistance, shatter resistance and visual clarity. Air Infiltration The amount of air
More informationVINYL WINDOWS (new construction or replacement) page 2. VINYL PATIO DOORS pages WOOD CLAD WINDOWS (new construction).page 5 WOOD CLAD WINDOWS
RECOMMENDED INSTALLATION INSTRUCTIONS Please choose the appropriate instructions for the product(s) you are using. Read the instructions thoroughly before beginning the installation process. All instructions
More informationSeries 6000 Vinyl Single Hung
Series 6000 Horizontal Slider Series 6000 Vinyl Single Hung Contents List of Architectural Drawings...6000SH - 3 Elevations - Single Hung...6000SH - 4 Available Sizes - Single Hung...6000SH - 5 Series
More informationVisions 2000 Single Hung Tilt Window Parts Reference Catalog
Visions 2000 Single Hung Tilt Window Parts Reference Catalog (Includes Parts and Information for Single Hung Tilt Picture and Basement and Miscellaneous Parts for Single Hung Tilt Oriel and Single Hung
More informationDoors & Windows. Series 700 Windows, Single Hung Tilt Standard Features. Slider Lock. Vinyl Windows. J-Rail '
Vinyl Windows Series 700 Windows, Single Hung Tilt Standard Features Constructed with white virgin PVC vinyl 2-3/8" overall frame dimension: 1" face to fin; lap pocket for vinyl siding Fusion welded frame
More informationPlease read and understand all instructions before beginning. These instructions cover the non-impact aluminum French Door 101.
The performance and proper operation of a door is only as good as the installation. By following these instructions, the probability of a good installation greatly increases. Please read and understand
More informationINSTALLATION INSTRUCTION FOR CLAD BOW WINDOWS WITHOUT HEAD AND SEAT BOARD
2008 Pella Corporation Part Number: 80KG0101 INSTALLATION INSTRUCTION FOR CLAD BOW WINDOWS WITHOUT HEAD AND SEAT BOARD Note: These instructions may be used for all Pella Bow windows that do not have a
More informationRead guide from beginning to end before starting installation. Read all warnings and cautions during unit installation.
Installation Guide for E-Series/Eagle High-Performance Mullion Windows with LVL Reinforcement and Installed Using Type B Clips Thank you for choosing Andersen. Instructions are for typical, new wood-framed
More informationINSTALLATION INSTRUCTIONS. Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING
JANUARY, 2014 1 INSTALLATION Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING INSTRUCTIONS 2 FRAME ASSEMBLY JANUARY, 2014 601442 SHEAR BLOCK BALL BEARING NRP BUTT (FACTORY APPLIED
More informationINSTALLATION INSTRUCTION FOR WOOD DOUBLE-HUNG AND CASEMENT WINDOWS USING WOOD BRICKMOULD OR FLAT CASING
2009 Pella Corporation Part Number: 80DZ0101 INSTALLATION INSTRUCTION FOR WOOD DOUBLE-HUNG AND CASEMENT WINDOWS USING WOOD BRICKMOULD OR FLAT CASING Brickmould/Flat Casing Aluminum Head Flashing Corner
More information4-lite Patio Door. Installation Instructions
4-lite Patio Door Installation Instructions IMPORTANT: Read the instructions and familiarize yourself with the door parts and pieces before beginning assembly and installation. Note: Only the 5-0 x 6-8
More informationINSTALLATION INSTRUCTIONS IMPERVIA SLIDING PATIO DOOR WITH FINS
2008 Pella Corporation Part Number: 803V0101 INSTALLATION INSTRUCTIONS IMPERVIA SLIDING PATIO DOOR WITH FINS Installation Instructions for Typical Wood Frame Construction. These instructions were developed
More informationWINDOW REPLACEMENT INSTRUCTIONS FOR CASEMENT, DOUBLE-HUNG AND CLAD FRAME WINDOWS USING FRAME SCREWS
WINDOW REPLACEMENT INSTRUCTIONS FOR CASEMENT, DOUBLE-HUNG AND CLAD FRAME WINDOWS USING FRAME SCREWS These instructions were tested developed for replacing windows in wood-frame wall construction systems
More informationFeaturing classic style combined with the latest in innovative window technology, the Sierra Pacific aluminum clad. Carmel Double Hung
Featuring classic style combined with the latest in innovative window technology, the Sierra Pacific aluminum clad window is a true aesthetic beauty. No visible PVC jambliners to mar the beauty of the
More informationMasonite Steel Entry Doors
Masonite Steel Entry Doors STEEL ENTRY DOORS Masonite HD High-Definition Steel Doors Masonite Metal-Edge Steel Doors Masonite Wood-Edge Steel Doors PREMVU Wood-Edge Steel Flush-Glazed Doors Masonite Steel
More informationINSTALLATION INSTRUCTIONS for Wood/Clad Wood Windows without Exterior Trim or Nailing Fin (JII025) ImpOrTaNT INFOrmaTION & GlOssary.
for Wood/Clad Wood Windows without Exterior Trim or Nailing Fin (JII025) Thank you for selecting JELD -WEN products. Attached are JELD-WEN s recommended installation instructions for metal clad wood windows
More informationINSTALLATION INSTRUCTION INSTRUCCIONES DE INSTALACIÓN FOR CLAD HINGED PATIO DOOR PUERTA DE BISAGRA PARA PATIO
2008 Pella Corporation Part Number: 801V0101 INSTALLATION INSTRUCTION INSTRUCCIONES DE INSTALACIÓN FOR CLAD HINGED PATIO DOOR PUERTA DE BISAGRA PARA PATIO REMEMBER TO USE APPROPRIATE PERSONAL PROTECTIVE
More informationGeneral Information... Elevation Notes... Elevation Notes Transom... Light Cut Information... Clear Opening Design Data Table 1 & 2 Panel...
TABLE OF CONTENTS General Information..................................... Elevation Notes......................................... Elevation Notes Transom................................. Light Cut Information....................................
More informationLegend W White B Bronze S Silver (Gray) K Black M Mill. Figure
Figure Description Part No. Additional Part Manual No. Color Code Page No. 1 Frame head N/A Not shown 2 Screen adaptor N/A Not shown 3 Frame jamb N/A Not shown 4 Frame sill N/A Not shown 5 Frame sill adaptor
More informationArchitectural detail manual Classic Wood Awning Windows
PRODUCT SPECIFICATIONS EXTERIOR FINISH All exterior surfaces completely covered with factory-applied latex primer. Natural exterior (no primer) available as an option. AURALAST WOOD AuraLast wood is fundamentally
More informationSingle-Hung Windows Premium Atlantic Aluminum
TABLE OF CONTENTS Specifications... 2-2 QuickSpecGuide... 2-3 Elevations: Scale Single-Hung-FloridaSizes... 2-4 Grille Patterns... 2-5 SectionDetails: 6 Scale... 2-6 InstallationWallDetails... 2-10 PagethroughthePDFusingthebutonsontheright,
More informationWEB BASED CORE APPLICATION SPECIFIC INSTALLATION INFORMATION AND METHODS
CORE WEB BASED CORE APPLICATION SPECIFIC INSTALLATION INFORMATION AND METHODS Removing Old Windows Part I - Frame In Although all possible measures have been taken to insure the accuracy of the material
More informationInstallation Guide for Andersen Architectural Clad Inswing Entry and Patio Doors
Installation Guide for Andersen Architectural Clad Inswing Entry and Patio Doors Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly, installation and maintenance
More informationINSTALLATION INSTRUCTION - INSTRUCCIONES DE INSTALACIÓN FOR CLAD CASEMENT & AWNING WINDOW VENTANA DE DOS HOJAS CON REVESTIMIENTO
2008 Pella Corporation Part Number: 801P0101 INSTALLATION INSTRUCTION - INSTRUCCIONES DE INSTALACIÓN FOR CLAD CASEMENT & AWNING WINDOW VENTANA DE DOS HOJAS CON REVESTIMIENTO Corner Corner Top Fin Corner
More information6400, 8400 and 9400 Series Sliding Patio Door
Contemporary 3 Panel Classic 5 Panel French Panel 6400, 8400 and 9400 Series Sliding Patio Door (O) Fixed Panel Left (X) Operating / Mullion Panel Right (X) Operating / Lock Panel Left (O) Fixed Panel
More informationRead guide from beginning to end before starting installation. Read and follow all warnings and cautions during unit installation.
Installation Guide for Andersen Clad Outswing Folding Doors with Track-In-Floor Thank you for choosing Andersen. Instructions are for typical, new wood-framed wall construction with weather protection
More informationF r e n c h w o o d G l i d i n g P a t i o D o o r s
Contents Frenchwood Gliding Patio Doors Basic Unit Details Two and Four Panel...9-2 Sidelight...9-5 Options / Accessories Ramped Insert - Interior and Exterior...9-6 Grilles...9-7 Anchoring Methods...9-9
More informationStyle Line Series. Vinyl Windows. Architectural Manual
Style Line Series Vinyl Windows Architectural Manual Instructions on how to use this manual: This document has been designed for easy navigation and to quickly click to the section you need. Here s some
More informationINSTALLATION INSTRUCTION - INSTRUCCIONES DE INSTALACIÓN FOR CLAD SLIDING PATIO DOOR PUERTA CORREDERA PARA PATIO
2008 Pella Corporation Part Number: 801W0103 INSTALLATION INSTRUCTION - INSTRUCCIONES DE INSTALACIÓN FOR CLAD SLIDING PATIO DOOR PUERTA CORREDERA PARA PATIO Corner Fin Corner Door Top Nailing Fin Side
More information70 Series. Preferred Replacement Bay and Bow Windows
70 Series Preferred Replacement Bay and Bow Windows Andersen Corporation, including its subsidiary Silver ine Building Products C, earned the 2010 ENERGY STAR Partner of the Year award. Preferred Replacement
More information(773) INSTALLATION INSTRUCTIONS for Vinyl Windows with Integral Nailing Fin (JII001) IMPORTANT INFORMATION & GL OSSARY ROUGH OPENINGS
Thank you for selecting C l i m a t e G u a r d products. Attached are our recommended installation instructions for Vinyl windows with an integral (2400-02) will not affect application of the ClimateGuard
More informationINSTALLATION INSTRUCTIONS for Wood/Clad Wood Windows with Exterior Trim or Nail Fin (JII024)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for metal clad wood windows with nailing fin or primed wood windows with exterior trim. While the
More informationCurtain Wall Installation Guide
Curtain Wall Installation Guide Curtain Wall Installation Guide 1 IMPORTANT NOTICES! Important Notices & Information Manufacturer s Notes: The building envelope must be correctly prepared with weather
More informationMetal & Vinyl, Flush Mount and Recessed Fin Windows Recommended Installation Instructions
PO Box 480 Ph: 417-235-7821 Monett, MO 65708 Fax: 417-737-7140 Metal & Vinyl, Flush Mount and Recessed Fin Windows Recommended Installation Instructions These installation instructions are recommendations
More informationProduct Presentation
2016 Product Presentation DOOR SILLS Inswing Door Sills Entry and Patio WEATHER RESISTANT Solid foam PVC base provides added thermal resistance (thermally-broken) Non-rot, water and termite resistant Closed-cell
More informationInstallation Instructions for Custom Wood and Fiberglass Door Systems (JII100)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Custom Wood and Fiberglass Doors. Read these instructions thoroughly before beginning. They
More information4300Wi WOOD INTERIOR CASEMENT VINYL WINDOW gerkin.com
00Wi 800.75.506 gerkin.com 00Wi Decades Of Proven Performance Gerkin is one of the industry s most respected manufacturers of vinyl window and door products. We blend new material technology with innovative
More informationINSTALLATION INSTRUCTIONS - INSTRUCCIONES PARA LA INSTALACIÓN CLAD WINDOWS WITH FLUSH FLANGE
2012 Pella Corporation Part Number: 81CP0101 INSTALLATION INSTRUCTIONS - INSTRUCCIONES PARA LA INSTALACIÓN CLAD WINDOWS WITH FLUSH FLANGE Lea las instrucciones en español en el reverso Installation Instructions
More informationInstallation Guide for Architectural Wood Hinged Windows
Guide for Architectural Wood Hinged Windows Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly, installation and maintenance are essential if the benefits
More informationSITELINE CLAD-WOOD WINDOW CASEMENT TABLE OF CONTENTS
TABLE OF CONTENTS 1 GENERAL INFORMATION Dimensional Windows Siteline clad casement windows may be specified as "dimensional", by adjusting the desired rough opening width or height. Siteline clad casement
More informationSTACKING MULTI-SLIDE DOOR SYSTEM INSTALLATION INSTRUCTIONS
STACKING MULTI-SLIDE DOOR SYSTEM INSTALLATION INSTRUCTIONS 1290363 Revision 1 12/16 Page 1 Weather Shield Mfg., Inc. NOTICE CAUTION! Failure to install and maintain our product according to these instructions
More informationWEB BASED CORE APPLICATION SPECIFIC INSTALLATION INFORMATION AND METHODS
CORE WEB BASED CORE APPLICATION SPECIFIC INSTALLATION INFORMATION AND METHODS Proper Window & Door Flashing Although all possible measures have been taken to insure the accuracy of the material presented,
More informationUNIVERSITY SERIES Fixed, Projected and Casement Steel Windows
Fixed, Projected and Casement Steel Windows Hope's University Series steel window profiles were designed for projects requiring historic replication of exterior putty glazed steel windows. The fixed and
More informationI n s t a l l a t i o n I n s t r u c t i o n s
HInged PAtio Door Systems I n s t a l l a t i o n I n s t r u c t i o n s IMPORTANT: Read the instructions and familiarize yourself with the door parts and pieces before beginning assembly and installation.
More informationVinyl Windows Manufactured by VPI Quality Windows
Vinyl Windows Manufactured by VPI Quality Windows Part Number: 531&591 Installation 531 & 591 SERIES SLIDING AND HUNG WINDOW INSTALLATION INSTRUCTIONS Installation Instructions for Typical Construction.
More information26- H i n g e d P a t i o D o o r s - I n s w i n g
Contents Hinged Patio Doors - Inswing Basic Unit Details... 2 Options / Accessories Accessibility Option... 5 Andersen Grilles... 6 Extension s... 7 Anchoring Methods... 8 Joining Details... 9 Suggested
More informationWeather Shield Awning and Scena Vu Wood Window Parts Reference Catalog
Weather Shield Awning and Scena Vu Wood Window Parts Reference Catalog #1024040 (03/02) Weather Shield Mfg., Inc. Medford, WI 54451 715/748-2100 Table of Contents Awning and Scena Vu Wood Window Parts
More informationINSTALLATION INSTRUCTIONS for Vinyl Windows with Integral Nailing Fin (JII001) IMPORTANT INFORMATION & GLOSSARY ROUGH OPENINGS
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Vinyl windows with an integral nailing fin. While the use of these installation instructions
More informationSteel Reinforced Joining Guide (Horizontal / Vertical)
(Horizontal / Vertical) for Andersen Patio Door and/or Elliptical Top Window Combinations Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly, installation
More informationBlock Frame Inovo Patio Door/Transom/Sidelite Field Mulling Instructions. simonton.com/installation. If mulling sidelites, skip to Step 5.
Effective Date: 10/1/17 Tools Needed Kit Contents Safety Glasses Cordless Drill Phillips Screw Bit Two-step Drill Bit (3/8-1/8 ) Utility Knife Interior Mullion Exterior Mullion Cover Hardware Kit Clamps
More informationAll Window Installation Instruction
1 All Window Installation Instruction Hurd Window Installation Instructions for Nail Fin & Wood Brick Mould Units Nail Fin Windows See Pages 2-11 Wood Brick Mould Windows See Pages 2-6, 8 & 12BM - 14BM
More informationHeavy Wall Applied Stop Tube Frame and Door Installation
INSTALLATION INSTRUCTIONS Heavy Wall Applied Stop Tube Frame and Door Installation Read all instructions before beginning installation. These instructions are provided to help prevent installation problems
More informationSeries 6000 Vinyl Horizontal Slider
Series 6000 Horizontal Slider Series 6000 Vinyl Horizontal Slider Contents List of Architectural Drawings...6000HS - 3 Elevations - XO or OX...6000HS - 4 Available Sizes - XO or OX...6000HS - 5 Elevations
More informationVinyl Windows and Doors Manufactured by VPI Quality Windows
Vinyl Windows and Doors Manufactured by VPI Quality Windows Part Number: 511_Installation ENDURANCE CASEMENT\AWNING\PW INSTALLATION INSTRUCTIONS Installation Instructions for Typical Construction These
More informationSun Windows General Information New Construction Sliding Door Installation Instructions H F
A G B D C H F H E H A. Apply Weather Resistive Barrier B. Apply Bottom Flashing Tape C. Install Sill Pan End Caps & Pan D. Caulk Sides & Top Nailing Surface, Set Door, Fasten E. Apply Side Flashing Tape
More informationWOOD OUT SWING AWNING, CASEMENT, & HOPPER WINDOW
WOOD OUT SWING AWNING, CASEMENT, & HOPPER WINDOW INSTALLATION GUIDE READ SPECIFIC INSTALLATION INSTRUCTIONS COMPLETELY BEFORE STARTING ANY INSTALLATION Failure to install and maintain our product according
More informationSeries 9000 Vinyl Fixed Window
Series 2030 Picture Window Series 9000 Vinyl Fixed Window Contents List of Architectural Drawings... 9000PW - 3 Elevations - 9000 Fixed... 9000PW - 4 Available Sizes - 9000 Fixed... 9000PW - 5 Elevations,
More informationContemporary 3 Panel Classic 5 Panel French Panel
Contemporary 3 Panel Classic 5 Panel French Panel (X) Operating / Lock Panel Left (O) Fixed Panel Right Note : Glazing Beads For All Panel Face To The Exterior 2 Panel XO Left Is Shown Above Opposite =
More informationArchitectural Manual. Vinyl Windows & Patio Doors
Architectural Manual Vinyl Windows & Patio Doors Instructions on how to use this manual: This document has been designed for easy navigation and to quickly click to the section you need. Here s some important
More informationReplacement Windows Measuring & Installation Guide
Proper Measuring Proper Measuring of Typical Wood Openings Replacement windows are ordered and manufactured E.B. (Exact Both) size, exact width and exact height. Windows are manufactured to the nearest
More informationINSTALLATION SHOP DRAWINGS FOR MINNEAPOLIS, MN
MINNEAPOLIS, MN 2-0- 2-- General Notes Abbreviations Deviations from Architectural Specifications Deviations from Architectural Drawings ALUM. = ALUMINUM B.O. = BY OTHERS CONT. = CONTINUOUS. = CLEARANCE
More informationPocket Door Installation Instructions
Installation Instructions Before getting started: Read instructions thoroughly. Be sure that you have the necessary tools and materials before starting the installation. Consult your local building code
More informationFold-A-Way Patio Door ASSEMBLY & INSTALLATION GUIDE
Fold-A-Way Patio Door ASSEMBLY & INSTALLATION GUIDE This instruction guide provides the minimum recommended procedures to correctly prepare the rough opening, install a fold-a-way patio door unit and apply
More informationTechnical Guide E. EDouble/Single Hung Windows. Technical Guide E1
Technical Guide E Double/Single Hung Windows E Technical Guide E1 Product Features Styles Double Hung, Single Hung, Radius Top and Cottage options. Standard Features Natural, clear Douglas Fir interior
More information3-LITE PATIO DOOR INSTALLATION INSTRUCTIONS
3-LITE PATIO DOOR INSTALLATION INSTRUCTIONS IMPORTANT: Read the instructions and familiarize yourself with the door parts and pieces before beginning assembly and installation. TOOLS NEEDED: Tape Measure
More informationAwning and Casement Window
Awning and Casement Window Please also see: Options Full Lifetime Warranty Overview All Series Casement and Awning windows are available in both standard and custom sizes to match virtually any design,
More informationINSTALLATION INSTRUCTIONS for Vinyl Windows with Integral Nailing Fin (JII001)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Vinyl windows with an integral nailing fin. While the use of these installation instructions
More informationInstallation Guide for Andersen Architectural Clad Hinged Windows
Guide for Andersen Architectural Clad Hinged Windows Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly, installation and maintenance are essential if the
More informationTESTED FOR Report No. : A04H-009 Date : February 10, 2004 FLEETWOOD ALUMINUM PRODUCTS, INC. Page : 1 of Railroad Street Corona, CA 91720
TESTED FOR Date : February 10, 2004 FLEETWOOD ALUMINUM PRODUCTS, INC. Page : 1 of 5 2485 Railroad Street Corona, CA 91720 1.0 PURPOSE The purpose of this report is to present the testing methods employed
More informationInSTallaTIon InSTruCTIonS For 4-lITe PaTIo Door unassembled
InSTallaTIon InSTruCTIonS For 4-lITe PaTIo Door unassembled Measuring Tape Pencil Shims Drill & Drill bits: 6", 8", 5 6", 7 6" Tools & materials You Will need: Square Hammer or Mallet Level Stiff Putty
More informationNEW CONSTRUCTION PATIO DOOR INSTALLATION INSTRUCTIONS (WITH NAILING FLANGE)
NEW CONSTRUCTION PATIO DOOR INSTALLATION INSTRUCTIONS (WITH NAILING FLANGE) Slim Line & Classic French Style Patio Doors Materials included: (2) #10 x 2-1/2" Phillips Pan head keeper s (2) 3/8" Hole plugs
More informationWOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR. Table of Contents
WOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR Table of Contents PAGE History... 2 Part Identification Wood Commercial Door XX RHRA... 3 Part Identification Wood Commercial Door Stationary
More informationTherma-Tru Fiber-Classic and Smooth-Star Sliding Patio Door System
PATIODOORSYSTEMS Therma-Tru Fiber-Classic and Smooth-Star Sliding Patio Door System Quad Unit Assembly & Installation Read all instructions before starting. The applicable standards for these products
More informationINSTALLATION INSTRUCTION - INSTRUCCIONES DE INSTALACIÓN FOR CLAD AWNING, CASEMENT & NON-RECTANGULAR CASEMENT WINDOW
2009 Pella Corporation Part Number: 812W0100 INSTALLATION INSTRUCTION - INSTRUCCIONES DE INSTALACIÓN FOR CLAD AWNING, CASEMENT & NON-RECTANGULAR CASEMENT WINDOW para las Ventanas de madera recubiertas
More informationChapter 9. Windows and Exterior Doors
Chapter 9. Windows and Exterior Doors 9.1 INSTALLING WINDOWS 9.2 INSTALLING EXTERIOR HOUSE DOORS 9.3 INSTALLING SHED DOOR 9.4 INSTALLING EGRESS COMPONENTS Tools needed by volunteers: Hammer Nail apron
More informationNorwood Windows Permaglass Fiberglass Products Installation Instruction
Norwood Windows Permaglass Fiberglass Products Installation Instruction Care and storage of fiberglass windows: Fiberglass products purchased from Norwood Windows must be stored in a dry sheltered area
More informationINSTALLATION INSTRUCTIONS IMPERVIA (Vent and Fixed) AWNING, CASEMENT, and LARGE AWNING WINDOW WITH FINS
2012 Pella Corporation Part Number: 80WH0101 INSTALLATION INSTRUCTIONS IMPERVIA (Vent and Fixed) AWNING, CASEMENT, and LARGE AWNING WINDOW WITH FINS Installation Instructions for Typical Wood Frame Construction.
More informationINOVO 4-LITE SLIDING PATIO DOOR ASSEMBLY AND INSTALLATION INSTRUCTIONS
INOVO 4-LITE SLIDING PATIO DOOR ASSEMBLY AND INSTALLATION INSTRUCTIONS IMPORTANT: READ THE INSTRUCTIONS AND FAMILIARIZE YOURSELF WITH THE DOOR PARTS AND PIECES BEFORE BEGINNING ASSEMBLY AND INSTALLATION.
More informationINSTALLATION GUIDE WOOD PIVOTING CIRCLE/ OVAL
WOOD PIVOTING CIRCLE/ OVAL READ SPECIFIC INSTALLATION INSTRUCTIONS COMPLETELY BEFORE STARTING ANY INSTALLATION Failure to install and maintain our product according to these instructions will VOID any
More information4. Partially open the operating panel and tilt the top toward the interior of the door (Figure 4). Lift the panel off the sill and set it aside.
Effective Date: 10/1/2017 Tools Needed Kit Contents Hardware Kit Safety Glasses Cordless drill Phillips screw bit Two-step drill bit (3/8-1/8 ) utility knife Interior Mullion Exterior Mullion Cover clamps
More informationLCS075 All Purpose Glazing Tool LCS Patio Door Roller Channel
Patio, storm & exterior door hardware LCS075 All Purpose Glazing Tool Arrow Bumper LCS Patio Door Roller Channel Mousetrap 1 BRONZE BUSHINGS * New size now available. 2 CORNER KEYS LCS1460 Miter Cut, Glass
More information4500 Series. Fabrication and Installation Instructions
4500 Series Fabrication and Installation Instructions E4500 Series July, 2017 Table of Contents GENERAL CONSTRUCTION NOTES... 3 EXTRUDED ALUMINUM PARTS... 5 ACCESSORIES... 7 OVERVIEW... 8 FRAME FABRICATION...
More informationDear Contractor, I am glad that you are interested in our window rebate program.
Dear Contractor, I am glad that you are interested in our window rebate program. I have included three documents with this letter. One is our form to indicate your intention to participate in the program.
More informationTHERMO-FIT REPLACEMENT WINDOW INSTALLATION INSTRUCTIONS (BRICKMOULD / NO NAILING FLANGE)
THERMO-FIT REPLACEMENT WINDOW INSTALLATION INSTRUCTIONS (BRICKMOULD / NO NAILING FLANGE) fig.3 Casement, Awning, Fixed Casement, Direct-Set, Double-Hung, Single-Hung & Horizontal Slider Windows Materials
More informationBAYS, BOWS, DETAILS AND VALUE ADDED FEATURES. gerkin.com
BAYS, BOWS, DETAILS AND VALUE ADDED FEATURES gerkin.com Gerkin COMFORT SERIES BOWS Whether, a room needs to feel a little more open, space is a premium or some character is needed, Gerkin fits the need
More informationRead guide from beginning to end before starting installation. Read and follow all warnings and cautions during unit installation.
Installation Guide for Andersen Wood Outswing Folding Doors with Track-In-Floor Thank you for choosing Andersen. Instructions are for typical, new wood-framed wall construction with weather protection
More informationWindows Installed into Walls with Polyiso and Wood Framing. Installation Instructions Standard Method Revised 10/24/2016
Windows Installed into Walls with Polyiso and Wood Framing Installation Instructions Standard Method Revised 10/24/2016 Background There are many acceptable ways to mount and detail windows for support
More information