DURA-THRUST LINEAR THRUSTERS LT SERIES ET SERIES PREMIER LINE REPLACEABLE CYLINDER
|
|
- Rodney Tucker
- 5 years ago
- Views:
Transcription
1 DURATHRUST S LT SERIES PREIER LINE Full range of sizes and strokes Internal Cylinder Precision ounting Adjustable Hard Stops Robust design Extremely Durable Fully field serviceable Sensors Ready Page 31.1 ET SERIES REPLACEABLE CYLINDER Full range of sizes and strokes External Cylinder Precision ounting Hard Stops Robust design Extremely Durable Fully field serviceable Sensors Available Page 32.1 FOR ORE INFORATION CALL US AT OR FAX: VISIT US AT
2 DURATHRUST Linear Thrusters LTSERIES DURATHRUST LT Series of Linear Thrusting Devices provide industry leading quality and durability for automatic working positioning/holding. The LT series is designed for high demanding applications where precision and durability are required. FEATURES DURATHRUST LT Series is internally powered by fully field repairable air cylinders. The slide bearings are oil impregnated bronze bushings. Rods are bolted to the end blocks to assure positive location and rigidity. Adjustable shaft mounted locking collars with nylon bumper pads allow easy setup and provide low noise level minimizing the clatter inherent in fast acting slide devices. Furthermore the entire LT series is sensor ready. OUNTING STYLES DURATHRUST LT Series units can be mounted and located in any plane with provided mounting holes and dowel pin holes. The main bodies contain counterbored clearance holes for cap screws and optional tapped holes for mounting with dowel pin holes for precise location. The end blocks contain tapped and dowel pin holes for easy adaptations to additional work moving/ holding devices or customer tooling. Optional end blocks are also available for mounting 2 units together. SPECS BORE DIA [11.1mm] ROD DIA [6.35mm] SPECS BORE DIA [14.3mm] ROD DIA [9.5mm] LT1 Page 31.4 LT2 Page 31.5 LT3 The LT series of linear thrusters is perfect for demanding applications such as part assembly, part stops or location, lifting tables, and clamps. TECHNICAL SPECIFICATION Pneumatic Specifications ENGLISH ETRIC Pressure Range psi bar Cylinder Type Double Acting Dynamic Seals BunaN Required Valves 4way, 2 position Temperature Range BunaN Seals (standard) 30 to 180 F 35 to 80 C Viton Seals (V option) 20 to 300 F 30 to 150 C OPERATING PRINCIPLES SPECS BORE DIA [19.1mm] ROD DIA [12.7mm] LONGER S SPECS BORE DIA [28.6mm] ROD DIA [19.1mm] Page 31.6 LT4 Page 31.7 EXHAUST INTAKE INTAKE EXHAUST FOR ORE INFORATION CALL US AT OR FAX: VISIT US AT
3 ANUFACTURING CO. PRODUCT FEATURES DURATHRUST LTSERIES Aircraft Grade Aluminum Black Hard Coat Optional End blocks For direct connection to next smaller thruster All Units Sensor Ready For use with magnetic sensors Precision Ground Shafting Case hardened to 6062 Rc Available agnetic Sensors Round body with Quick Disconnect Locking Collars & Shock Pads Standard on all thruster isalignment Coupling Increases service life Ucup and Oring Seals Standard BunaN with Viton option Dowel Holes Standard on ain body and End Plate Tapped and Clearance Holes Available on ain body and End Block Sensor agnet Standard in all cylinders Precision Bronze Bushings Supports both ain and Piston rods OUNTING INFORATION ounts and operates in any orientation DESIGNED ANUFACTURED ASSEBLED IN THE USA AIN BODY PAYLOAD ount thru ain body using Cbore Clearance holes on topside and Tapped holes on both sides. Use Dowel holes for positive location. ount Payload to End block using Tapped holes. Use Dowel holes for positive location. (T) Option retains Tapped holes on both sides and provides Tapped holes to mount up to bottom. Use Dowel holes for positive location (C) Option allowing thru the End block to the payload using Cbore Clearance holes. Use Dowel holes for positive location. FOR ORE INFORATION CALL US AT OR FAX: VISIT US AT
4 ANUFACTURING CO. ADDITIONAL INFORATION DURATHRUST LTSERIES DURATHRUST LT SYSTES With DURATHRUST LT series each thruster unit can mount directly to the next smaller thruster thru an optional end block The thruster are mounted with cap screws and located with Dowel Pins and can be position in both orientations shown. HOW TO ORDER (1) Order larger Thruster with optional End block (B) (2) Order next size smaller Thruster with optional Tapped body holes (T) NO ADAPTER PLATES LT21.0B LT11.0T CUSTO APPLICATIONS ultilevel Pick and Place system created using a DURASLIDE RGC Linear Slide with two DURATHRUST LT Linear Thruster Overhead Gantry system created using a DURASLIDE LSE Air Slide with a DURATHRUST LT Linear Thruster FOR ORE INFORATION CALL US AT OR FAX: VISIT US AT
5 ANUFACTURING CO. DIENSIONAL DRAWING DURATHRUST LT1 SPECIFICATIONS LT1 LT1 aximum Air Pressure 100 psi 6.9 bar Thrust 80 psi / 5.5 bar 12.0 lbf 53.3 N Unit Force Factor Extend 0.15 lbf/psi 9.7 N/bar Unit Force Factor Retract 0.12 lbf/psi 7.9 N/bar Base Weight 0.35 lb 0.16 kg Additional Weight per Stroke 0.16 lb/in 2.9 g/mm Cylinder Bore Diameter 0.437" mm Shaft Diameter 0.250" 6.35 mm ADDITIONAL DIENSIONS A B 1 [25.4] [56.5] [104.8] 2 [50.8] [81.9] [155.6] LOADING LT1 LT1 (in [mm]) ax Applied Load (Extended) F+W 8 lbf 4 lbf 36 N 18 N ax oment 10 lbfin 1.1 Nm ax Dynamic Load (Payload) W 2 lbf 0.91 kg F W Flow controls recommended for nearly all applications HOW TO ORDER : BASIC UNIT ACCESSORIES (order separately) ETRIC BASIC ODEL LT1 ETRIC Inch: 1.0, 2.0 mm: 25.4, 50.8 HOLES T Tapped Body END PLATE C Cbore Clearance holes SEALS V Viton (standard Buna N) SAPLE ORDER: LT12.0T Ex) LT1 Thruster with 2 inch stroke and Tapped Body Holes END BLOCK T C HOLES SEALS V AGNETIC SENSOR KITS * (Round track mounted) RSKN agnetic Sensor NPN w/ quick disconnect Kit RSKP agnetic Sensor PNP w/ quick disconnect Kit * Sensors kits include (2) sensors and (2) 5 meter cables. AGNETIC SENSORS * (Round track mounted) RSN agnetic Sensor NPN w/ quick disconnect RSP agnetic Sensor PNP w/ quick disconnect * Includes (1) sensor. SENSOR CABLE SENCAB5 Quick Disconnect PUR Cable 5 Length CUSTO DESIGNS ALWAYS AVAILABLE PLEASE CONTACT US FOR INFORATION FOR ORE INFORATION CALL US AT OR FAX: VISIT US AT
6 ANUFACTURING CO. DIENSIONAL DRAWING DURATHRUST LT2 SPECIFICATIONS LT2 LT2 aximum Air Pressure 100 psi 6.9 bar Thrust 80 psi / 5.5 bar 19.8 lbf 88.2 N Unit Force Factor Extend 0.25 lbf/psi 16.0 N/bar Unit Force Factor Retract 0.22 lbf/psi 14.2 N/bar Base Weight 0.90 lb 0.41 kg Additional Weight per Stroke 0.16 lb/in 2.9 g/mm Cylinder Bore Diameter 0.562" mm Shaft Diameter 0.375" 9.53 mm ADDITIONAL DIENSIONS A B 1 [25.4] [60.3] [90.8] 2 [50.8] [85.7] [167.0] LOADING LT2 LT2 (in [mm]) ax Applied Load (Extended) F+W 20 lbf 10 lbf 89 N 45 N ax oment 50 lbfin 5.6 Nm ax Dynamic Load (Payload) W 5 lbf 2.3 kg F W Flow controls recommended for nearly all applications HOW TO ORDER : BASIC UNIT ETRIC ETRIC HOLES END PLATE BASIC ODEL LT2 HOLES Inch: 1.0, 2.0 mm: 25.4, 50.8 T Tapped Body B End Plate for direct connection to the LT1 C Cbore Clearance holes SEALS V Viton (standard Buna N) SAPLE ORDER: LT22.0T Ex) LT2 Thruster with 2 inch stroke and Tapped Body Holes T END BLOCK B SEALS V ACCESSORIES (order separately) AGNETIC SENSOR KITS * (Round track mounted) RSKN agnetic Sensor NPN w/ quick disconnect Kit RSKP agnetic Sensor PNP w/ quick disconnect Kit * Sensors kits include (2) sensors and (2) 5 meter cables. AGNETIC SENSORS * (Round track mounted) RSN agnetic Sensor NPN w/ quick disconnect RSP agnetic Sensor PNP w/ quick disconnect * Includes (1) sensor. SENSOR CABLE SENCAB5 Quick Disconnect PUR Cable 5 Length CUSTO DESIGNS ALWAYS AVAILABLE PLEASE CONTACT US FOR INFORATION FOR ORE INFORATION CALL US AT OR FAX: VISIT US AT
7 ANUFACTURING CO. DIENSIONAL DRAWING DURATHRUST LT3 SPECIFICATIONS LT3 LT3 aximum Air Pressure 100 psi 6.9 bar Thrust 80 psi / 5.5 bar 35.3 lbf 157 N Unit Force Factor Extend 0.44 lbf/psi 28.5 N/bar Unit Force Factor Retract 0.39 lbf/psi 25.3 N/bar Base Weight 2.19 lb 0.99 kg Additional Weight per Stroke 0.54 lb/in 9.6 g/mm Cylinder Bore Diameter 0.750" mm Shaft Diameter 0.500" 12.7 mm ADDITIONAL DIENSIONS A B 1 [25.4] [73.0] [141.0] 2 [50.8] [98.4] [191.8] 3 [76.2] [123.8] [242.6] LOADING LT3 LT3 (in [mm]) ax Applied Load (Extended) F+W 30 lbf 15 lbf 10 lbf 133 N 69 N 45 N ax oment 75 lbfin 8.5 Nm ax Dynamic Load (Payload) W 10 lbf 4.5 kg F W Flow controls recommended for nearly all applications HOW TO ORDER : BASIC UNIT ETRIC ETRIC HOLES END PLATE BASIC ODEL LT3 HOLES Inch: 1.0, 2.0, 3.0 mm: 25.4, 50.8, 76.2 T Tapped Body B End Plate for direct connection to the LT2 C Cbore Clearance holes SEALS V Viton (standard Buna N) SAPLE ORDER: LT32.0V Ex) LT3 Thruster with 2 inch stroke and Viton Seals T END BLOCK B SEALS V ACCESSORIES (order separately) AGNETIC SENSOR KITS * (Round track mounted) RSKN agnetic Sensor NPN w/ quick disconnect Kit RSKP agnetic Sensor PNP w/ quick disconnect Kit * Sensors kits include (2) sensors and (2) 5 meter cables. AGNETIC SENSORS * (Round track mounted) RSN agnetic Sensor NPN w/ quick disconnect RSP agnetic Sensor PNP w/ quick disconnect * Includes (1) sensor. SENSOR CABLE SENCAB5 Quick Disconnect PUR Cable 5 Length CUSTO DESIGNS ALWAYS AVAILABLE PLEASE CONTACT US FOR INFORATION FOR ORE INFORATION CALL US AT OR FAX: VISIT US AT
8 ANUFACTURING CO. DIENSIONAL DRAWING DURATHRUST LT4 SPECIFICATIONS LT4 LT4 aximum Air Pressure 100 psi 6.9 bar Thrust 80 psi / 5.5 bar 79.5 lbf N Unit Force Factor Extend 0.99 lbf/psi 64.1 N/bar Unit Force Factor Retract 0.92 lbf/psi 59.1 N/bar Base Weight 3.75 lb 1.7 kg Additional Weight per Stroke 1.0 lb/in 17.9 g/mm Cylinder Bore Diameter mm Shaft Diameter mm ADDITIONAL DIENSIONS A B 2 [50.8] [104.8] [207.7] 3 [76.2] [130.2] [258.5] 4 [101.6] [155.6] [309.3] 5 [127.0] [181.0] [360.1] LOADING LT4 LT4 (in [mm]) ax Applied Load (Extended) F+W lbf lbf lbf lbf N N N N ax oment 250 lbfin 28.2 Nm ax Dynamic Load (Payload) W 25 lbf 11.3 kg F W Flow controls recommended for nearly all applications HOW TO ORDER : BASIC UNIT ETRIC BASIC ODEL LT4 ETRIC Inch: 2.0, 3.0, 4.0, 5.0 HOLES mm: 50.8, 76.2, 101.6, HOLES T Tapped Body END PLATE B End Plate for direct connection to the LT3 C Cbore Clearance holes SEALS V Viton (standard Buna N) SAPLE ORDER: LT43.0T Ex) LT4 Thruster with 3 inch stroke and Tapped Body Holes T END BLOCK B SEALS V ACCESSORIES (order separately) AGNETIC SENSOR KITS * (Round track mounted) RSKN agnetic Sensor NPN w/ quick disconnect Kit RSKP agnetic Sensor PNP w/ quick disconnect Kit * Sensors kits include (2) sensors and (2) 5 meter cables. AGNETIC SENSORS * (Round track mounted) RSN agnetic Sensor NPN w/ quick disconnect RSP agnetic Sensor PNP w/ quick disconnect * Includes (1) sensor. SENSOR CABLE SENCAB5 Quick Disconnect PUR Cable 5 Length CUSTO DESIGNS ALWAYS AVAILABLE PLEASE CONTACT US FOR INFORATION FOR ORE INFORATION CALL US AT OR FAX: VISIT US AT
9 EXPLODED VIEW ANUFACTURING CO. DURATHRUST LTSERIES LT3 & LT4 NOTE: For Piston Assemblies please see diagram specific to model number LT2 LT1 FOR ORE INFORATION CALL US AT OR FAX: VISIT US AT
10 ANUFACTURING CO. PARTS LIST HOW TO ORDER PARTS ITE REQ D NAE LT1 LT2 LT3 LT4 1 1 ain Body LT101 LT201 LT301 LT End Block LT102 LT202 LT302 LT Rear Piston * LT103 LT203 LT303 LT Front Piston * LT104 LT204 LT304 LT404 5 Table Guide Bushing * LT105 (1 REQ D) LT205 (1 REQ D) LT305 (2 REQ D) LT405 (2 REQ D) 6 1 Seal Bushing * LT106 LT206 LT306 LT End Cap * LT107 LT207 LT307 LT Piston Rod LT108 LT208 LT308 LT Connector * LT109 LT209 LT309 LT Rod LT110 LT210 LT310 LT Bushing * LT111 LT211 LT311 LT Table Piston Seal * ORG011 (1 REQ D) UCP125 (2 REQ D) UCP225 (2 REQ D) UCP255 (2 REQ D) 16 2 Oring * ORG012 ORG014 ORG018 ORG Piston Rod Seal * UCP110 UCP115 UCP Shock Pads * XSP0250 XSP0375 XSP0500 XSP Locking Collars * XLC0250 XLC0375 XLC0500 XLC Repair Kit # * LT1 LT2 LT3 LT4 OPTIONS S 1 T 3 B 4 C 5 S 1 S 1 V 2 V 2 V 2 V 2 ETRIC PART NUBER OPTIONS SAPLE ORDER: LT Ex) LT1 Piston Rod with 2 inch stroke OPTIONS (see product pages for information) 1 S = Stroke 2 V = Viton Seals option 3 T = Tapped Holes option 4 B = Adapter End Block option 5 C = Cbore Clearance option NOTES * etric code not required # Repair Kits include req d qty of parts marked with in diagram above specific to thruster model FOR ORE INFORATION CALL US AT OR FAX: VISIT US AT
11 DURATHRUST Linear Thrusters ETSERIES NONROTATING VERTICAL / LIGHT DUTY HORIZONTAL ET1 DURATHRUST ET Series of Linear Thrusting Devices provide a practical, lowcost, economy approach to automatic working positioning/holding. The ET series is designed for nonrotating vertical or light duty horizontal applications where the load capacity our LT series are not required, while still offering the quality construction and durability you ve come to expect. FEATURES DURATHRUST ET Series is externally powered by standard nonrepairable air cylinders. The slide bearings are oil impregnated bronze bushings. Rods are pinned to the end blocks to assure positive location. Adjustable shaft mounted locking collars with nylon bumper pads allow easy setup and provide low noise level minimizing the clatter inherent in fast acting slide devices. Furthermore the entire ET series is sensor ready. OUNTING STYLES DURATHRUST ET Series units can be mounted and located in any plane with provided mounting holes and dowel pin holes. The main bodies contain both tapped holes and counterbored clearance holes for cap screws. The end blocks contain the same features for easy adaptations to additional work moving/holding devices or customer tooling. SPECS BORE DIA [14.3mm] ROD DIA [6.4mm] SPECS BORE DIA [19.1mm] ROD DIA [9.5mm] Page 32.3 ET2 Page 32.4 ET3 The ET series of economy thrusters is perfect for simple applications such as part ejection, part stops, lifting tables, and clamps. TECHNICAL SPECIFICATION Pneumatic Specifications ENGLISH ETRIC Pressure Range psi bar Cylinder Type Double Acting Dynamic Seals BunaN Required Valves 4way, 2 position SPECS BORE DIA [27.0mm] ROD DIA [12.7mm] Page 32.5 ET4 Temperature Range BunaN Seals (standard) 30 to 180 F 35 to 80 C Viton Seals (V option) 20 to 300 F 30 to 150 C OPERATING PRINCIPLES SPECS BORE DIA [38.1mm] ROD DIA [19.1mm] Page 32.6 EXHAUST INTAKE INTAKE EXHAUST FOR ORE INFORATION CALL US AT OR FAX: VISIT US AT
12 ANUFACTURING CO. PRODUCT FEATURES DURATHRUST VERTICAL LIGHT DUTY HORIZONTAL ETSERIES Aircraft Grade Aluminum Black Anodize Finish Precision Features Low Cost Sensor Ready and Precision ounting All Units Sensor Ready For use with agnetic Sensors agnetic Sensors available Clampon with Quick Disconnect isalignment Coupling Increases service life Sensor agnets Standard in all cylinders Locking Collars& Shock Pads Standard on all thruster ultiple ounting Features Tapped, Counterbored Clearance and Dowel Holes in End block and ain body Precision Ground Shafting Case hardened to 6062 Rc Bronze Bushings Oil impregnated bronze bushing for high load and low wear. OUNTING INFORATION ounts and operates in any orientation DESIGNED ANUFACTURED ASSEBLED IN THE USA PAYLOAD ount Payload thru End block using Cbore Clearance Holes on backside and or mount up to End block using Tapped holes on front side. Use Dowel holes for positive location. AIN BODY ount thru ain body using Cbore Clearance Holes on topside and or mount up to ain body using Tapped holes on backside. Use Dowel holes for positive location. FOR ORE INFORATION CALL US AT OR FAX: VISIT US AT
13 ANUFACTURING CO. DIENSIONAL DRAWING DURATHRUST VERTICAL LIGHT DUTY HORIZONTAL ET1 SPECIFICATIONS ET1 ET1 aximum Air Pressure 100 psi 6.9 bar Thrust 80 psi / 5.5 bar 19.2 lbf 85.4 N Unit Force Factor Extend 0.24 lbf/psi 15.5 N/bar Unit Force Factor Retract 0.22 lbf/psi 14.2 N/bar Base Weight 0.47 lb 0.21 kg Additional Weight per Stroke 0.05 lb/in 0.85 g/mm Cylinder Bore Diameter 0.562" mm Shaft Diameter 0.250" 6.35 mm LOADING ET1 ET1 Typical Load (Force + Weight)*Stroke (F+W)*S 4 lbfin 0.45 Nm ax oment 4 lbfin 0.45 Nm Typical Dynamic Payload W 2 lbf 0.91 kg Flow controls recommended for nearly all applications F W HOW TO ORDER : BASIC UNIT ETRIC BASIC ODEL ET1 ETRIC Inch: in 0.5 increments mm: in 25.4mm increments SEALS V Viton (standard Buna N) SEALS SAPLE ORDER: ET12.0 Ex) ET1 Thruster with 2 inch stroke V CUSTO DESIGNS ALWAYS AVAILABLE PLEASE CONTACT US FOR INFORATION ACCESSORIES (order separately) AGNETIC SENSOR KITS * (Cylinder clamp mounted) CSKN agnetic Sensor NPN w/ quick disconnect Kit CSKP agnetic Sensor PNP w/ quick disconnect Kit CSKR agnetic Sensor REED w/ quick disconnect Kit * Sensors Kits include (2) sensors and (2) cylinder clamps and (2) 5 meter cables. AGNETIC SENSORS * (Cylinder clamp mounted) CSN agnetic Sensor NPN w/ quick disconnect CSP agnetic Sensor PNP w/ quick disconnect CSR agnetic Sensor REED w/ quick disconnect * Includes (1) sensors and (1) cylinder clamp SENSOR CABLE SENCAB5 Quick Disconnect PUR Cable 5 Length FOR ORE INFORATION CALL US AT OR FAX: VISIT US AT REV A 32.3
14 ANUFACTURING CO. DIENSIONAL DRAWING DURATHRUST VERTICAL LIGHT DUTY HORIZONTAL ET2 SPECIFICATIONS ET2 ET2 aximum Air Pressure 100 psi 6.9 bar Thrust 80 psi / 5.5 bar 35.2 lbf N Unit Force Factor Extend 0.44 lbf/psi 28.4 N/bar Unit Force Factor Retract 0.39 lbf/psi 25.2 N/bar Base Weight 1.05 lb 0.48 kg Additional Weight per Stroke 0.09 lb/in 1.63 g/mm Cylinder Bore Diameter 0.750" mm Shaft Diameter 0.375" 9.52 mm LOADING ET2 ET2 Typical Load (Force + Weight)*Stroke (F+W)*S 6 lbfin 0.68 Nm ax oment 6 lbfin 0.68 Nm Typical Dynamic Payload W 5 lbf 2.3 kg Flow controls recommended for nearly all applications F W HOW TO ORDER : BASIC UNIT ETRIC BASIC ODEL ET2 ETRIC Inch: increments mm: mm increments SEALS V Viton (standard Buna N) SAPLE ORDER: ET21.0V Ex) ET2 Thruster with 1 inch stroke and Viton seals CUSTO DESIGNS ALWAYS AVAILABLE PLEASE CONTACT US FOR INFORATION SEALS V ACCESSORIES (order separately) AGNETIC SENSOR KITS * (Cylinder clamp mounted) CSKN agnetic Sensor NPN w/ quick disconnect Kit CSKP agnetic Sensor PNP w/ quick disconnect Kit CSKR agnetic Sensor REED w/ quick disconnect Kit * Sensors Kits include (2) sensors and (2) cylinder clamps and (2) 5 meter cables. AGNETIC SENSORS * (Cylinder clamp mounted) CSN agnetic Sensor NPN w/ quick disconnect CSP agnetic Sensor PNP w/ quick disconnect CSR agnetic Sensor REED w/ quick disconnect * Includes (1) sensors and (1) cylinder clamp SENSOR CABLE SENCAB5 Quick Disconnect PUR Cable 5 Length FOR ORE INFORATION CALL US AT OR FAX: VISIT US AT
15 ANUFACTURING CO. DIENSIONAL DRAWING DURATHRUST VERTICAL LIGHT DUTY HORIZONTAL ET3 SPECIFICATIONS ET3 ET3 aximum Air Pressure 100 psi 6.9 bar Thrust 80 psi / 5.5 bar 70.4 lbf N Unit Force Factor Extend 0.88 lbf/psi 56.7 N/bar Unit Force Factor Retract 0.81 lbf/psi 52.3 N/bar Base Weight 1.68 lb 0.76 kg Additional Weight per Stroke 0.16 lb/in 2.9 g/mm Cylinder Bore Diameter 1.062" 27 mm Shaft Diameter 0.500" 12.7 mm LOADING ET3 ET3 Typical Load (Force + Weight)*Stroke (F+W)*S 8 lbfin 0.9 Nm ax oment 8 lbfin 0.9 Nm Typical Dynamic Payload W 10 lbf 4.5 kg Flow controls recommended for nearly all applications F W HOW TO ORDER : BASIC UNIT ACCESSORIES (order separately) ETRIC BASIC ODEL ET3 ETRIC Inch: increments mm: mm increments SEALS V Viton (standard Buna N) SAPLE ORDER: ET32.0V Ex) ET3 Thruster with 2 inch stroke and Viton seals CUSTO DESIGNS ALWAYS AVAILABLE PLEASE CONTACT US FOR INFORATION SEALS V AGNETIC SENSOR KITS * (Cylinder clamp mounted) CSKN agnetic Sensor NPN w/ quick disconnect Kit CSKP agnetic Sensor PNP w/ quick disconnect Kit CSKR agnetic Sensor REED w/ quick disconnect Kit * Sensors Kits include (2) sensors and (2) cylinder clamps and (2) 5 meter cables. AGNETIC SENSORS * (Cylinder clamp mounted) CSN agnetic Sensor NPN w/ quick disconnect CSP agnetic Sensor PNP w/ quick disconnect CSR agnetic Sensor REED w/ quick disconnect * Includes (1) sensors and (1) cylinder clamp SENSOR CABLE SENCAB5 Quick Disconnect PUR Cable 5 Length FOR ORE INFORATION CALL US AT OR FAX: VISIT US AT
16 ANUFACTURING CO. DIENSIONAL DRAWING DURATHRUST VERTICAL LIGHT DUTY HORIZONTAL ET4 SPECIFICATIONS ET4 ET4 aximum Air Pressure 100 psi 6.9 bar Thrust 80 psi / 5.5 bar lbf N Unit Force Factor Extend 1.76 lbf/psi N/bar Unit Force Factor Retract 1.61 lbf/psi N/bar Base Weight 4.07 lb 1.85 kg Additional Weight per Stroke 0.33 lb/in 5.92 g/mm Cylinder Bore Diameter mm Shaft Diameter 0.750" mm LOADING ET4 ET4 Typical Load (Force + Weight)*Stroke (F+W)*S 15 lbfin 1.69 Nm ax oment 15 lbfin 1.69 Nm Typical Dynamic Payload W 25 lbf 9.1 kg Flow controls recommended for nearly all applications F W HOW TO ORDER : BASIC UNIT ETRIC BASIC ODEL ET4 ETRIC Inch: increments mm: mm increments SEALS V Viton (standard Buna N) SAPLE ORDER: ET41.0 Ex) ET4 Thruster with 1 inch stroke CUSTO DESIGNS ALWAYS AVAILABLE PLEASE CONTACT US FOR INFORATION SEALS V ACCESSORIES (order separately) AGNETIC SENSOR KITS * (Cylinder clamp mounted) CSKN agnetic Sensor NPN w/ quick disconnect Kit CSKP agnetic Sensor PNP w/ quick disconnect Kit CSKR agnetic Sensor REED w/ quick disconnect Kit * Sensors Kits include (2) sensors and (2) cylinder clamps and (2) 5 meter cables. AGNETIC SENSORS * (Cylinder clamp mounted) CSN agnetic Sensor NPN w/ quick disconnect CSP agnetic Sensor PNP w/ quick disconnect CSR agnetic Sensor REED w/ quick disconnect * Includes (1) sensors and (1) cylinder clamp SENSOR CABLE SENCAB5 Quick Disconnect PUR Cable 5 Length FOR ORE INFORATION CALL US AT OR FAX: VISIT US AT
17 EXPLODED VIEW ANUFACTURING CO. DURATHRUST VERTICAL LIGHT DUTY HORIZONTAL ETSERIES PARTS LIST HOW TO ORDER PARTS ETRIC PART NUBER ITE REQ D NAE ET1 ET2 ET3 ET4 OPTIONS 1 1 ain Body ET101 ET201 ET301 ET End Block ET102 ET202 ET302 ET Bushing * ET103 ET203 ET303 ET Connector ET104 ET204 ET304 ET Rod ET105 ET205 ET305 ET405 S Air Cylinder ET106 ET206 ET306 ET406 S 1 V Locking Collar * XLC0250 XLC0375 XLC0500 XLC Shock Pad * XSP0250 XSP0375 XSP0500 XSP Repair Kit * # ET1 ET2 ET3 ET4 SAPLE ORDER: ET Ex) ET1 Rod with 2 inch stroke OPTIONS OPTIONS (see product pages for information) 1 S = Stroke 2 V = Viton Seals NOTES * etric code not required # Repair Kits include req d qty of parts marked with FOR ORE INFORATION CALL US AT OR FAX: VISIT US AT
18 TECH NOTES R&I ANUFACTURING CO. FOR ORE INFORATION CALL US AT OR FAX: VISIT US AT
DURA-TAC ROTARY ACTUATORS SRA SERIES JG SERIES BALL DRIVEN RACK DRIVEN
DURATAC JG SERIES BALL DRIVEN SRA SERIES RACK DRIVEN See Page 51.1 See Page 52.1 DURATAC Rotary Actuators JGSERIES BALL DRIVEN DURATAC JG1000 is an economic rotary actuator with rotary motion achieved
More informationDURA-GRIP PH-SERIES. Parallel Grippers PH-30 / PH-40 PH-50 / PH-60 PH-70
PHSERIES PH Series of Part Placement Devices is designed to provide a low cost gripping unit for use on transfer mechanisms. These air operated units grip parts internally or externally offering the designer
More informationAngular Grippers- Cam Driven Series
RA SERIES Angular Grippers- Cam Driven Series. General Purpose: This style gripper is widely used in the industry and is a rugged design that supplies very high grip force for its size. Cost Effective:
More informationParallel Grippers- Low Profile Series
RPL SERIES 1.9 Parallel Grippers- Low Profile Series Precision applications: Preloaded Dual-V roller bearings eliminate side play for excellent part position repeatability. Repeatable grip force: Low friction
More informationROCK DRILLS Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1027 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill the reservoir with air tool oil or 10W equivalent for
More informationParallel Grippers 1.1. For more information call us at: DESTACO or Fax: Visit us on the Internet at:
Parallel Grippers PARALLEL GRIPPERS 1.1 PARALLEL GRIPPERS 1.2 Parallel Motion Gripper DPP Precision Series Precision parallel gripper featuring our DIRECTCONNECT mounting pattern Dual-V precision roller
More informationRPE Parallel Gripper- Electric Gripper Series
1.14 RPE Parallel Gripper- Electric Gripper Series Failsafe Operation: Spring closed feature allows for full grip force during power off conditions. Electrically Actuated: Requires simple 24VDC pulsed
More informationParts Sheet. RSX096 High Force, Rod Style Actuator EXPLODED VIEW - RSX _00_RSX09. * Specify stroke length when ordering A/R = As Required
RSX0 High Force, Rod Style Actuator Parts Sheet 00_00_RSX0 EXPLODED VIEW RSX0 0 0 0 PART NO or ITEM Config. Code DESCRIPTION QTY. 0 Leadscrew/Rollerscrew (Standard) Leadscrew/Rollerscrew (TRR Option) 0
More informationThe model number of all Transition Plates consists of two alphanumeric clusters. The first cluster designates product type, base product and bore size
Aluminum plates that couple Bimba actuators Ultran rodless cylinders, rotary actuators, and Thrusters into a variety of multi-axis configurations. The customer s attachment reads a bar code on the product
More informationNEW PRODUCT BULLETIN Linear Thrusters
ulletin #G-J0 NW PROUT UTIN inear Thrusters G Series lock Style Slides Tapped holes top, 'bore/thru hole from bottom () Toolbar- nodized aluminum Repairable, built-in air cylinder earing block- nodized
More informationPARALLEL PNEUMATIC GRIPPERS MINIATURE SERIES
PRE PEUI GRIPPERS IIURE SERIES DESIGED FOR IFOD OUIG RP Series Small Part Handling RP-1 Precision Gripping Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning ccuracy
More informationTWIN ROD CYLINDERS 6 CONTENTS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG TWIN ROD CYLINDERS6 CONTENTS TWIN ROD CYLINDERS 6 Features 745 Specifications/Order Codes 747 Inner Construction and Major Parts 748 Dimensions
More informationHigh Precision Air Chucks
Precision Workholding Solutions High Precision Air Chucks www..com Improve productivity and lower the cost of secondary machining operations..... through high concentricity. Holding close concentricity
More informationHigh Precision Diaphragm Chucks
Precision Workholding Technology High Precision Diaphragm Chucks Unique Diaphragm Chuck Design MicroCentric Improving the quality and efficiency of secondary machining operations.... through high workpiece
More informationMaintenance Information
16601023 Edition 2 January 2014 Air Impact Wrench 2705P1 Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these
More informationModel No: TC10. Parts Information: Tyre Changer - Automatic
Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10
More informationCOLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS
COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS ROYAL QUICK-GRIP MANUAL COLLET FIXTURES FOR 4TH AND 5TH AXIS APPLICATIONS q Unit is actuated via a hybrid mechanical/hydraulic mechanism.
More informationJARVIS. Model Brisket Scissor EQUIPMENT... TABLE OF
Model 423-17 Brisket Scissor EQUIPMENT SELECTION... Ordering No. TABLE OF CONTENTS... Page Model 423--17... 4037003 Air Filter / Regulator / Lubricator 3022003 Air Hose Assembly... 3059018 Balancer...
More informationParallel Grippers- DPG DIRECTCONNECT Modular Series
1.84 Parallel Grippers- DPG DIRECTCONNECT Modular Series Mounting Information: Grippers can be mounted & operated in any orientation G Technical Specifications: Pneumatic Specifications Imperial Metric
More informationInspection. Assembly Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent.
6010-34 Inspection 3. Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent. 3. If spring test equipment is available, check the tension of each spring according to the specifications
More informationSTEVENS SUBPLATES. STEVENS ENGINEERING, INC. TOLL-FREE WEB FAX
STEVENS SUBPLATES Spacing of hole patterns on Stevens accessories is identical to the pattern on Stevens Subplates. Insertion of the pull dowels thru bushed holes in the accessory into corresponding bushed
More informationSpecifications. Engine Dimensions. Dimensions in millimeters. Inch equivalents shown in [] Rev. -- 5KohlerEn
Engine Dimensions Dimensions in millimeters. Inch equivalents shown in []. 24 690 0 Rev. -- 5KohlerEn ENGINE IDENTIFICATION NUMBERS Kohler engine identiþcation numbers (model, speciþcation and serial)
More informationWhy Use Guided Keepers
Why Use Guided Keepers Guidance and Retention - ALL-IN-ONE This product may be covered by one or more patents or patent applications. See http://www.standardlifters.com/patents.html for details. 12/13
More informationService Parts List AA4V90
Service Parts List AA4V90 Series 1 06.96 Ordering of AA4V Parts For Rexroth to supply the correct parts for your unit, please include all of the following information with your parts order. TYPE CODE TYPE
More informationGAGING AND INSPECTION
Fixture Plates...75 Fixturing Towers...76 CMM Fixturing Kits... 77-78 Clamping Components... 79-80 Standoffs and Locators... 81-82 Magnetic Components... 83-84 Height Adjustment...84 Positioners...85 Clamp
More informationModel CBM-3 Counterbore Module Rev TABLE OF CONTENTS
92-0227 Rev. 070529 Model CBM-3 Counterbore Module TABLE OF CONTENTS CUSTOMER MESSAGE Inside Front Cover SAFETY PRECAUTIONS 3 GENERAL DESCRIPTION 6 SPECIFICATIONS 7 MAINTENANCE 9 OPERATION 10 CUTTING SPEEDS
More informationNo September, Char-Lynn. Power Steering. Repair Information. 20 Series Steering Control Unit 001
Char-Lynn Power Steering No. 7-313 September, 1997 Repair Information 20 Series Steering Control Unit 001 Bearing Race Retaining Ring Needle Thrust Bearing Bearing Race Seal Ring Backup Washer Seal (3
More informationw w w. h d o n l i n e s h o p. d e AUTOMATIC COMPRESSION RELEASE TOOL GENERAL INSTALLATION -J04654 REV Kit Number Models
-J05 REV. 008-0- GENERAL Kit Number 98-08 Models AUTOMATIC COMPRESSION RELEASE TOOL For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com
More informationBand-Master ATS Nano Pneumatic Banding Tool Operating Instructions
Band-Master ATS 601-118 Nano Pneumatic Banding Tool CONTENTS 601-118 Overview... 3 Safety.... 5 Initial Tool Set-up... 5 Regulator assembly mounting... 5 Attach tool head to regulator.... 6 Operating instructions...
More informationThe Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.
More informationSC Spare parts list. Hydraulic steel cutter. SC 3600 s/n DEQ Construction Tools GmbH No
SC 3600 Spare parts list Hydraulic steel cutter SC 3600 s/n DEQ169166-2018 Construction Tools GmbH No. 3390788601 2018-05-09 General information This spare parts list applies to the following: Part number
More informationPrecision Chucks for Improved Accuracy and Increased Productivity
Precision Workholding Technology Precision Chucks for Improved Accuracy and Increased Productivity Precision Air Chucks (Self Contained Design) MicroCentric Precision Air Chucks feature a patented open
More informationVSG4720. balancing. block machining. boring. cleaning. crankshaft. cylinder head machining. flywheel grinders. honing. motorcycle small engine
TM engine rebuilding equipment balancing block boring cleaning crankshaft cylinder head flywheel grinders honing motorcycle small engine surfacing center center versatility New capabilities Tooling adapters
More informationNEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
More informationModules. Sigma Tool Change System. Users Guide & Preventative Maintenance and Replacement Procedures
Sigma Tool Change System 3.1 5.1 Modules Users Guide & Preventative Maintenance and Replacement Procedures GUIDE : 95000_english Rev 11 648 Saratoga Road Glenville, NY 12302 USA Phone: 518 384 1000 Fax
More informationTruTrack Screw-Drive Actuator TKS50
TruTrack Screw-Drive Actuator TKS0 7 4 Parts Sheet 00-4_0_TKS0 4 Not backward compatible with units manufactured before 0/0/00 0 0 7 7 0 4 SOLID NUT SN0 LMI SN0 RP SN0 GH SN0 BRK. 00-00 Head, Idle. 00-04
More informationFRAME. Pull Type Rigid Frame, Lift Rotate INNER HITCH
Pull Type Rigid Frame, Lift Rotate INNER HITCH The hitch length can be adjusted in 15" increments to accommodate the tractor tire options (single or dual tires) being used and attachments installed on
More informationHydraulic Clamping Systems
Hydraulic Clamping Systems Hydraulic Swivel clamps, double action Operating pressure max. 250 bar Hydraulic swivel clamps are particularly designed for applications which require high clamping forces and
More informationPRODUCTION VISES. Vises. Bock Quick Change Fixturing. 5-Axis Production Vises
Vises Introduction to Design... 74 75 VMC/HMC Solutions...76 77 Ball Lock Mounting System...78 79 Production Vises 4" (100 mm) Production Vises... 80 81 6" (150 mm) Production Vises...82 83 Self Centering
More informationDelrin Cone T-Handle Spring Stop w/pad...9 Screw Jack Large Toggle Clamp w/pad...9 Adjustable Ball Positioner...14
Distributed by Rapp Industrial Sales INDEX Aluminum Fixture Plates...4 Pin Rest...11 Acrylic Plates...4 Thread Adapter...11 Fixturing Towers...5 Delrin Cone...11 CMM Fixturing Kits...6-7 Magnetic Rest
More informationKM3000 PORTABLE KEY MILL
KM3000 PORTABLE KEY MILL FEATURES SETUP & OPERATION COMPONENTS & ACCESSORIES TECHNICAL DATA Cut a new, full-depth, 6 inch (152 mm) keyway in less than 4 minutes.* The KM3000 Portable Key Mill is a simple,
More informationDrilling and Tapping. A Buyers Guide.
Drilling and Tapping A Buyers Guide www.miragemachines.com About Mirage Machines Mirage portable machine tools optimise the performance of on-site assets by achieving operational excellence, maximising
More informationDecide what reach is required. This must be at least equal to or larger than the depth of the part which needs removal. Safe Working Load (tonnes)
Sykes-Pickavant pullers are manufactured to a very high specification and subjected to rigorous testing - far exceeding their stated capacities. The legs and beams are drop forged from high quality steel
More informationPERFORMANCE RACING AND ENGINE BUILDING MACHINERY AND EQUIPMENT
PERFORMANCE RACING AND ENGINE BUILDING MACHINERY AND EQUIPMENT F68A Programmable Automatic Machining Center AC Servo Motors and Power Drawbar Hardened Box Way Column Touch Screen Control INDUSTRY EXCLUSIVE
More informationZero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
More informationAdditional Information
NUMBER: 1 34 13 S.M. REF.: Listed in Table ENGINE: EPA04/07 Series 60 DATE: January 2013 SUBJECT: CHECKING CYLINDER LINER PROTRUSION ADDITIONS, REVISIONS, OR UPDATES Publication Number Platform Section
More informationMODELS 49 RA 49 RAZ 49 RAC
General Safety and Maintenance Manual MODEL grinder featuring a rear exhaust. Model Number Exhaust Direction REAR Throttle Type (L) Lever or (K) Safety Lever Speed 12000 to 14000 R.P.M (13500rpm is standard)
More informationPower Output. Spindle. 7.7 Inches (196 cm) 11.0 Lbs. (5.0 Kg)
HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual SUPER HEAVY DUTY VERTICAL GRINDERS 4 Horsepower Vertical Grinders 4 HORSEPOWER Model Number Throttle Type Power Output Weight
More informationParts Sheet. MXB63P Profiled Rail, Belt-Drive Actuators 63mm (2-1/2 inch) Series EXPLODED VIEW - MXB63P _02. Models: MXB63PBWS50
Parts Sheet #80000_0 MXBP Profiled Rail BeltDrive Actuators Parts Sheet MXBP Profiled Rail, BeltDrive Actuators mm (/ inch) Series Models: MXBPBWS0 EXPLODED VIEW MXBP b 8 9 80000_0 0 a 0 8 9 ITEM PART
More informationGeneral Safety and Maintenance Manual
General Safety and Maintenance Manual 3 H.P HORIZONTAL GRINDERS CAPACITY -6 Inch (150 mm) or 8 Inch (200 mm) Type 1 Wheels -Any Type 16, 17, 17R, 18 or 18R Cone Wheels w/ 5/8-11 Mounting 3 H.P HORIZONTAL
More informationParts Sheet. MXB25P Profiled Rail, Belt-Drive Actuators 25mm (1 inch) Series EXPLODED VIEW - MXB25P _02. Models: MXB25PBWS18
Parts Sheet #0000_0 MXBP Profiled Rail BeltDrive Actuators Parts Sheet MXBP Profiled Rail, BeltDrive Actuators mm ( inch) Series Models: MXBPBWS b EXPLODED VIEW MXBP 0000_0 a 0 0 ITEM PART NO or Config.
More informationSG10XY. Cylinder Head Seat & Guide Machine. With ACTIV Spindle & Guide-to-Guide Automation. your machining time, productivity and profits!
SG10XY Cylinder Head Seat & Guide Machine With ACTIV Spindle & Guide-to-Guide Automation your machining time, productivity and profits! Machining Equipment Created for Performance Racing & Engine Remanufacturing.
More informationFast, Flexible, Functional
FA ZTEK T H E S H A P E O F T H I N G S T O C O M E T-Slotted Aluminum Solutions Fast, Flexible, Functional FAST Prompt, timely shipments Shortest possible turnaround Large in-stock inventory of standard
More informationExploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw
Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw 136 137 135 134 132 131 133 113 114 115 117 116 118 119 120 121 79 78 77 107 108 65 76 110 109 66 10 9 6 11 5 4 8 7 75 74 73 72 111 112
More informationBead Roller Operating, Servicing, and Safety Instruction Manual
Bead Roller Operating, Servicing, and Safety Instruction Manual CAUTION: Read and Understand These Operating, Servicing, and Safety Instructions, Before Using This Machine. 1-800-67-26 10 Cooperative Way
More informationTable of Contents. B. Base Tool Changer...2 MC-16 Manual Tool Changer...2
Table of Contents B. Base Tool Changer...2 MC-16 Manual Tool Changer...2 1. Product Overview... 2 1.1 Master Plate Assembly... 2 1.1.1 Optional Ratchet Knob... 2 1.2 Tool Plate... 3 1.3 Optional Modules...
More informationw w w. h d o n l i n e s h o p. d e TIMKEN BEARING CONVERSION TOOL GENERAL INSTALLATION -J04672 REV Kit Number Models
-J067 REV. 008-07- GENERAL Kit Number 8-08 Models TIMKEN BEARING CONVERSION TOOL For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com
More informationIntroduction... 2 Scope of Manual... 2 Description... 2 Specifications Installation... 2 Actuator Mounting... 3 Loading Connection...
Instruction Manual Form 1909 February 1999 Type 657 Sizes 80 & 100 Introduction.............................. 2 Scope of Manual............................. 2 Description..................................
More informationJARVIS. Model25CL-4,5,6 Hock Cutter and Loin Dropper. 25CL--5 Front Legs and Horns. 25CL--4 Hind Legs and Horns. 25CL--6 Loins
Model25CL-4,5,6 Hock Cutter and Loin Dropper 25CL--4 Hind Legs and Horns 25CL--5 Front Legs and Horns 25CL--6 Loins EQUIPMENT SELECTION... Ordering No. TABLE OF CONTENTS... Page 25CL--4... 4025007 25CL--5...
More informationFisher 667 Diaphragm Actuators Size 80 and 100
Instruction Manual 667 Size 80 and 100 Actuators Fisher 667 Diaphragm Actuators Size 80 and 100 Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications... 2 Maximum Pressure Limitations...
More informationFisher 1052 Size 20 Diaphragm Rotary Actuator with H Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (H) Fisher 1052 Size 20 Diaphragm Rotary Actuator with H Mounting Adaptation Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications...
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
R8 COLLETS SERIES 333 : SUPERIOR IMPORT SERIES 330 : (Concentricity guaranteed to 0.000) Size 1/32** 1995502 1/16 1995104 7169005 3/32 1995106 7169010 1/8 1995108 7169012 5/32 1995110 7169015 3/16 1995112
More informationC-15 Truck Engine 9NZ00001-UP(SEBP ) - Document Structure. Media Number -RENR Publication Date -01/07/2008 Date Updated -22/07/2008
Page 1 of 8 Shutdown SIS Previous Screen Product: TRUCK ENGINE Model: C-15 TRUCK ENGINE 9NZ Configuration: C-15 Truck Engine 9NZ00001-UP Disassembly and Assembly C-15, C-16 and C-18 Truck Engines Media
More informationPARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V
PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V UPPER ASSEMBLY 101 6190481 THROTTLE CABLE FOR MODELS WITH ADDITIONAL CHOKE CABLE 1 101 6190751 THROTTLE CABLE FOR MODELS WITH OUT ADDITIONAL
More informationMODEL D DIESEL PILE HAMMER
AMERICAN PILEDRIVING EQUIPMENT, INC. MODEL D125-42 DIESEL PILE HAMMER SPARE PARTS BOOK Corporate Office 7032 S. 196th Street Kent, WA, USA 98032 Tel: 1-800-248-8498 Tel: 1-253-872-0141 Fax: 1-253-872-8710
More informationSHEREX FASTENING SOLUTIONS PNEUMATIC SPIN-SPIN RIGHT ANGLE INLINE STYLE RIVET NUT INSTALLATION TOOL SSG-913 MANUAL
SHEREX FASTENING SOLUTIONS PNEUMATIC SPIN-SPIN RIGHT ANGLE INLINE STYLE RIVET NUT INSTALLATION TOOL SSG-913 MANUAL SSG-913 Specifications R.P.M. - 400 *Air Pressure - 80-110 psi (oiled) Weight - 2.3 lbs.
More information2-JAW SELF-CENTERING PARALLEL PNEUMATIC GRIPPER (SERIES S)
2-JAW ELF-CENTERING PARALLEL PNEUMATIC GRIPPER (ERIE ) Hanover IF Design Award Winner. Modular with Gimapick ystem. Double-acting (single-acting on request). Bottom porting is available. High gripping
More informationMSR/MSB Mechanical Setting Tool
Tech Unit No: 0620000004 Revision: B Approved By: Quality Engineer Date: 2014-12-16 MSR/MSB Mechanical Setting Tool FEATURES: Special designed Bow Spring provides positive control and allows one size Mechanical
More informationSHEREX FASTENING SOLUTIONS PNEUMATIC SPIN-SPIN INLINE STYLE RIVET NUT INSTALLATION TOOL SSG-902 MANUAL
SHEREX FASTENING SOLUTIONS PNEUMATIC SPIN-SPIN INLINE STYLE RIVET NUT INSTALLATION TOOL SSG-902 MANUAL SSG-902 Specifications R.P.M. - 1500 *Air Pressure - 60-90 psi (oiled) Weight - 2 lbs. (0.9 kg) Air
More informationParts Manual. Field-Pro Heavy Harrow Bar. Part Number H
Parts Manual Field-Pro Heavy Harrow Bar Part Number H28542-04 IMPORTANT: ALL ITEMS ARE IDENTIFIED WITH A PART NUMBER. Some of the smaller parts such as bolts, nuts, washers, etc. are not all shown, however,
More information.500. location of stopscrews for Drill thru & c-bore for #10 S.H.C.S. (2) .60. #10-32 air connection (2).189 dia (2)
A -1 otary rive 0-180 ully Adjustable eatures Angle of rotation adjusted with built in stop screws with fine threads top screws are compatible with sensing switches esigned for production rates and long
More informationMODELS 920LS-922LS SERIES
THE MODELS 90LS-9LS SERIES HYDRAULIC LOG SPLITTER EXPLODED VIEWS WITH PART NUMBERS CONGRATULATIONS! You are now the proud owner of a BARRETO log splitter. The following pages have detailed views of your
More informationSG100XY. Large Capacity Cylinder Head Seat & Guide Machine. With ACTIV Spindle & Guide-to-Guide Automation
SG100XY Large Capacity Cylinder Head Seat & Guide Machine With ACTIV Spindle & Guide-to-Guide Automation your machining time, productivity and profits! Machining Equipment Created for Performance Racing
More informationRelated Products. Air Reservoirs. Related Products. Application Checklist
10.2-10.10 Air-to-Air Boosters 10.11-10.12 Air Reservoirs 10.13 Manual Valves 10.14 Absorbers 10.15-10.21 Transition Plates 10.22-10.35 Application Checklist Couplers Appendix 10.36 10.37-10.38 10.39 Related
More informationPower Train Lift Max. Capacity: 1,250 lbs.
655 EISENHOWER DRIVE OWATONNA, MN 55060 USA PHONE: (507) 455-7000 TECH. SERV.: (800) 533-6127 FAX: (800) 955-8329 ORDER ENTRY: (800) 533-6127 FAX: (800) 283-8665 INTERNATIONAL SALES: (507) 455-7223 FAX:
More informationOperating Instructions and Parts Manual 10-inch Table Saw
Operating Instructions and Parts Manual 10-inch Table Saw Model 66 shown with optional extension table and legs, mobile base, and motor cover WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60123 Part
More informationLORON SERVICE MANUAL / PARTS LIST SINGLE DOUBLE PALLET HANDLER CONTENTS: PAGE 1 Lift Truck Requirements General Installation Procedures
LORON SERVICE MANUAL / PARTS LIST SINGLE DOUBLE PALLET HANDLER CONTENTS: PAGE 1 Lift Truck Requirements General Installation Procedures 2 Mounting Options Stop Block Adjustments 3 General Weekly Inspection
More informationMXE32P Profiled Rail Bearing Screw-Drive Actuators 32mm (1-1/4 inch) Series
S Parts Sheet MXEP Profiled Rail Bearing ScrewDrive Actuators mm (/ inch) Series Models: MXEP MXEP MXEP MXEPSN0 MXEPSN0 7b 800007_0_MXE 8 8 9 7a 7 0 9 8 9 7 0 Parts Listing A/R= As Required 0 MXES ITEM
More informationInstalling CNC Stepper Motor Mounts on a Sherline Mill
WEAR YOUR SAFETY GLASSES FORESIGHT IS BETTER THAN NO SIGHT READ INSTRUCTIONS BEFORE OPERATING Mill upgrade kit part numbers: P/N 6700/6710 Model 5000/5400 mills P/N 6705/6715 Model 2000 mill P/N 6740/6745
More informationTemposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors M-Series Mobile Hydraulic in-cylinder Sensor Model MH PWM Output Data Sheet SENSORS Document Part Number 551119 Revision B M-Series
More informationSPIDA SAW OPERATIONS MANUAL
SPIDA SAW OPERATIONS MANUAL CM SERIAL NUMBER. OCTOBER 2000 CONTENTS Page description 1.) Contents 2.) Safety First 3.) CM Overview 4.) CM Specifications 5.) CM Installation 6.) CM Operation Setting the
More informationRepair Manual MK40A-MK45A-MK50A MK55A-MK60A-MK65A. Ref Rev.C General Pump is a Member of The Interpump Group
MK Repair Manual MK40A-MK45A-MK50A MK55A-MK60A-MK65A General Pump is a Member of The Interpump Group 8 INDEX 1. INTRODUCTION..................................................Page 3 2. REPAIR INSTRUCTIONS...........................................Page
More informationQuick-Release Front Vise 05G34.01
Quick-Release Front Vise 05G34.01 Patent Pending Introduction A front vise is the most generally useful vise on a typical workbench. It can be used for clamping parts on edge within the jaws, for clamping
More informationDesign a drill jig for drilling 4 holes in the following component.
Design a drill jig for drilling 4 holes in the following component. Design procedure for Jig a. Selection of Jig A leaf (or) latch jig is selected to accomplish this component. The leaf is hinged on one
More informationDiesel Pile Hammer D30-32 Part # 66508
Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner
More informationFixLogix CMM Fixture System Instructions
FixLogix CMM Fixture System Instructions FixLogix uses t-slot technology to provide simple fixture construction. Components are locked onto the plate or linear frames using FixLogix t-nuts. This design
More informationGeneral Safety and Maintenance Manual
General Safety and Maintenance Manual 4 H.P HORIZONTAL GRINDERS CAPACITY -6 Inch (150 mm) or 8 Inch (200 mm) Type 1 Wheels -Any Type 16, 17, 17R, 18 or 18R Cone Wheels w/ 5/8-11 Mounting 65H Series 4 H.P
More informationRelated Products. Manual Valves. Application Checklist. Related Products
Flow Controls 10.2-10.10 Air-to-Air Boosters 10.11-10.12 Air Reservoirs 10.13-10.17 Manual Valves 10.18 Absorbers 10.19-10.25 Transition Plates 10.26-10.39 Application Checklist 10.40 Alignment Couplers
More informationGeneral Safety and Maintenance Manual 3 H.P HORIZONTAL GRINDERS. and Thread RPM T1-5/8-11 X 1.9. Lever. Lever. Handle
HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual 3 H.P HORIZONTAL GRINDERS 3 H.P HORIZONTAL GRINDERS Capacity: -6 Inch (150 mm) or 8 Inch (200 mm) Type 1 Wheels -Any Type 16,
More informationParts Catalog. S-Series Slicer Smart Manual SG13. Model:
, 07 99507 ECN 065 Parts Catalog S-Series Slicer Smart Manual Model: SG SG 0/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
More informationNUMBER: S.M. REF.: Listed in Table ENGINE: Series 50/50G DATE: October 2013 SUBJECT: MACHINING CYLINDER BLOCK COUNTERBORES
NUMBER: 10 25 13 S.M. REF.: Listed in Table ENGINE: Series 50/50G DATE: October 2013 SUBJECT: MACHINING CYLINDER BLOCK COUNTERBORES ADDITIONS, REVISIONS, OR UPDATES Publication Number Platform Section
More informationModular transfer system. PDF- Catalog Modular Transfer System
Modular transfer system PDF- Catalog Modular Transfer System 1 Modular Transfer System TLM 1000 156, route de Lyon 38300 DOMARIN FRANCE Phone (33) 4 37 03 33 55 Fax (33) 4 37 03 33 59 September 2001 edition
More informationParts List 4 MODEL T-18 and T-27 Mark II Turbo-Meters
MP-1070A Rev. 9 Invensys Energy Metering 80 Liberty Boulevard DuBois, PA 15801 Telephone (814) 371-8000 FAX (814) 375-8460 Parts List 4 Model T-18 and T-27 Mark II Turbo-Meter Parts List 4 MODEL T-18 and
More informationBORE ALIGNMENT. Straightness measurement of bore and bearing journals PRINTER CONNECTION PC PROGRAM INCLUDED ELECTRONIC INCLINOMETER EXPANDABLE
D650 D660 BORE ALIGNMENT Straightness measurement of bore and bearing journals ELECTRONIC INCLINOMETER PC PROGRAM INCLUDED PRINTER CONNECTION EXPANDABLE IT S ALL ABOUT STRAIGHTNESS The Easy-Laser Linebore
More informationDanly Die Sets CATALOG DIE SETS. Quality & performance Quick delivery Precision Components
Danly Sets TM CATALOG DIE SETS Quality & performance Quick delivery Precision Components 1 TM Danly Sets www.anchordanly.com CATALOG DIE SETS Service We Deliver and Quality You Can Depend On Danly Sets
More informationTable of Contents. B. Base Tool Changer...2 MC-36 Manual Tool Changer...2
Table of Contents B. Base Tool Changer...2 MC-36 Manual Tool Changer...2 1. Product Overview... 2 1.1 Master Plate Assembly... 2 1.1.1 Optional Ratchet Knob... 2 1.2 Tool Plate... 3 1.3 Optional Modules...
More informationPrecision Grinding and Control Vise. Vises PSS. Tools and Accessories. For more Information current prices, please
PSK 50 shown incl. pull-down feature Vises Precision Grinding and Control Vise high precision, robust structure, hardened and ground v-grooves, high holding capacity can be used on 4 different sides face
More informationUSER MANUAL & PARTS LIST MODEL 136A S/N:
NUMBERALL STAMP & TOOL CO., INC. USER MANUAL & PARTS LIST MODEL 136A S/N: P.O. BOX 187, 1 HIGH ST. SANGERVILLE, ME 04479 www.numberall.com office@numberall.com TEL: 207-876-3541 FAX: 207-876-3566 MODEL
More informationPh: Fax:
www.lexairinc.com Ph: 859-255-5001 Fax: 859-255-6656 Lexair is a privately held, American owned corporation committed to the design and manufacturing of industrial products. We are a World Class Manufacturer
More informationParts Catalog. S-Series Slicer Manual Frozen Option S13. Model:
, 07 995 ECN 08 Parts Catalog S S-Series Slicer Manual Frozen Option Model: S 05/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
More information