CLEARCLOCK POWER OPTIMIZED 0.12ps 5x7mm XO
|
|
|
- Ira Morton
- 5 years ago
- Views:
Transcription
1 FEATURES APPLICATIONS 0.125ps typ jitter (150fs MAX f > 200MHz, 25 C) Highest in-class frequency range from 50 to 2100MHz Excellent spurious suppresion 70mA MAX IDD (, any VDD) Lowest in-class power consumption Supports,,, Supports ±50ppm or ±100ppm all inclusive stability -40 C to 85 C or -20 C to 70 C operation Industry standard 5x7mm footprint Networking and communications RF systems, base stations (BTS) Test and measurement Cloud, server and storage, Fibre Channel 100/400GbEthernet PCI Express OPTIONS AND PART IDENTIFICATION [Note 1] Note 1: Contact Abracon for part number requests with carrier frequency callouts up to 5 & 6 digit accuracy after the decimal. (1): Output Type P: D: H: (*) M: (4): OE Function (2): VDD A: 3.3V B: 2.5V C: 1.8V (*) (*) Excluding output (*) Frequency range limited to: 50~700MHz 1: OE Pin 1; Active High 2: OE Pin 1; Active Low 3: OE Pin 2; Active High 4: OE Pin 2; Active Low (3): Stability over OTR D: ±25ppm over -20 C to +70 C (5): Output Frequency in MHz Please specify the Frequency in units of MHz out to 4 digit accuracy after the decimal. (6): Packaging Blank: Bulk C: Cut Tape 50 units T: Tape & Reel 250 units Example: = MHz E: ±50ppm over -20 C to +70 C F: ±25ppm over -40 C to +85 C G: ±50ppm over -40 C to +85 C Part Number Example: PAF C
2 COMMON KEY ELECTRICAL SPECIFICATIONS Parameters Min [Note 1] Current Consumption (IDD) Set Tolerance (as 25 C ±3 C Operating Temperature Range (OTR) Storage Temperature Frequency Stability over OTR Aging over 10-Year Product Life [Note 2] All Inclusive Frequency Accuracy over 10-Year Product Life [Note 2] Rise (Tr) / Fall Time (Tf) <± // Duty Cycle Start-up Time [Note 2] 45 < 5.0 VOH VDD VDD-0.8 VOL VDD-2.0 VDD-1.55 VOH Output High Voltage (VOH) Output Low Voltage (VOL) Max. Frequency Range Power Supply Voltage (VDD) Typ. 1.4 VOL VOH VOL VOH VDD VDD=Max VOL VDD-0.6 VDD *(VDD) Notes Option P MHz V ma ppm C C Option D Option H Option M Option A Option B Option VDD=1.8V Relative to carrier See Options Option D or F ppm Option E or G ppm ppm D or F (±25ppm) E or G (±50ppm) ns % 50% VDD 2.0V or thevenin DD equivalent *(VDD) Output Enable (OE) Control Unit V DD V
3 COMMON KEY ELECTRICAL SPECIFICATIONS PARAMETERS MIN. MAX. UNIT Output Enable Time 2.5 ms Output Disable Time µs MHz MHz MHz MHz MHz Output Disable Current Consumption TYP. Vdd=3.3V Vdd=1.8V RMS Phase Jitter (12kHz -20MHz Vdd=3.3V fsec Note 1: Supply Voltage (Vdd) = 1.8V option not available with output Note 2: Relative to initial measured 25 C ±3 C TYPICAL PHASE NOISE AND JITTER CHARACTERISTICS (@25 C ± 3 C) [Note 2] Frequency (MHz) RF Output RMS Phase Jitter (fsec) 12kHz-20MHz BW 100Hz 1kHz 10kHz 100kHz Phase Noise (dbc/hz) 1MHz 10MHz 20MHz Frequency (MHz) RF Output RMS Phase Jitter (fsec) 12kHz-20MHz BW 100Hz 1kHz 10kHz 100kHz Phase Noise (dbc/hz) 1MHz 10MHz 20MHz Note 2: Refer to following Section for selected Phase Noise Plots
4 SELECTED PHASE NOISE PLOTS C ± 3 C) MHz VDD=3.3V 200MHz VDD=3.3V MHz VDD=1.8V 312.5MHz VDD=3.3V
5 SELECTED PHASE NOISE PLOTS C ± 3 C) MHz VDD=3.3V MHZ VDD=3.3V MHz VDD=3.3V 2100MHZ VDD=3.3V
6 TYPICAL FREQUENCY Vs. TEMPERATURE CHARACTERISTICS TYPICAL CURRENT CONSUMPTION (IDD) Vs. FREQUENCY CHARACTERISTICS 25ºC ± 3ºC) MECHANICAL DIMENSIONS TOP VIEW BOTTOM VIEW PIN # #1 #2 RECOMMENDED LAND PATTERN #3 #4 #5 #6 #7 #8 FUNCTION Option 1 & 2: Output Enable/ Disable Option 3 & 4: No Connect Option 1 & 2: No Connect Option 3 & 4: Output Enable/ Disable GND Output Complementary output Supply Voltage (VDD) No connect No connect *Compatible with industry standard 5x7mm footprint. Pin 7 and 8 are no connect solder pads, not required. Dimensions: mm
7 RECOMMENDED TEST CIRCUIT DIFFERENTIAL OUTPUT WAVEFORM
![REFLOW PROFILE [NOTE 5] [NOTE 6] [NOTE 7] ZONE 1 DESCRIPTION Preheat / Soak 2 3 Note 5: Ramp Up Rate (TL Note 6: Ramp Down Rate (TP Peak heat TEMPERATURE TSMIN ~ TSMAX 150 C ~ 200 C TL 217 C TP 260](/docs-images/81/84040616/images/8-4.jpg "C±5 C TIME 60 ~ 180 sec. 60 ~ 150 sec. 20 ~ 40 sec. ) = 3 C / sec. MAX ) = 6 C / sec.")
8 REFLOW PROFILE [NOTE 5] [NOTE 6] [NOTE 7] ZONE 1 DESCRIPTION Preheat / Soak 2 3 Note 5: Ramp Up Rate (TL Note 6: Ramp Down Rate (TP Peak heat TEMPERATURE TSMIN ~ TSMAX 150 C ~ 200 C TL 217 C TP 260 C±5 C TIME 60 ~ 180 sec. 60 ~ 150 sec. 20 ~ 40 sec. ) = 3 C / sec. MAX ) = 6 C / sec. MAX L ) = 8 minutes MAX P P *All temperatures refer to topside of the package, measured on the package body surface PACKAGING C = Cut Tape 50 units T = Tape & Reel 250 units/reel Tape Dimensions A 16.0 B 7.2 C 5.4 D 8.0 E 1.8 Reel Dimensions F G 16.5 H 19.6 Dimensions: mm
ClearClock Ultra-Low Jitter & Power Optimized 5.0 x 3.2 mm XO. (3): Stability over OTR. D: ±15ppm over -20 C to +70 C F: ±20ppm over -40 C to +85 C
Features Ultra-Low Jitter: 125 fs Typ RMS (200fs MAX, F>250MHz); spurs included Available with any frequency from 50MHz to 2100MHz Factory programmable; samples available within 1-2 week lead times Lowest
AMJD-SERIES. fout = 27MHz, VDD=1.8V,
FEATURES APPLICATIONS Output selectable between 2 frequencies Compact footprint as small as 1.6x1.2mm Low power consumption 1MHz to 100MHz output frequency range Short lead time for new frequencies Wide
Ultra Low Phase Noise VCXO
FEATURES: High "Q", 3rd Overtone Crystal Technology Ultra Low Phase Noise -162 dbc/hz Typ. @ 10kHz offset, 100MHz carrier Standard LVCMOS RF Output Wide Operating Temperature (-40ºC to +85ºC) standard
Key Electrical Specifications Parameters Minimum Typical Maximum Units Notes ppm
Moisture Sensitivity Level (MSL) 1 FEATURES: Ultra low phase Jitter: 0.2ps max integrated 12 khz to 20 MHz BW ±50ppm total frequency stability over -40 C to +85 C temperature range Output type: LVCMOS,,
ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT. Supply Voltage Vs Vs=+1.8V±5% is only for CML V
MEMS Differential Page 1 of 8 1 to 220 MHz High Performance LVPECL/ HCSL / LVDS / CML output High frequency stability SMD package 7.0 x 5.0 mm ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE
PARAMETER SYMBOL CONDITIONS VALUE UNIT
Page 1 of 6 FEATURES APPLICATIONS ±0.28 ppm Holdover Stability Mobile Phones ±4.6 ppm accuracy over all conditions Base Stations including 20 years aging Mobile Radios Miniature 5x7 mm SMD GPS Devices
Dynamic Engineers Inc.
Features and Benefits Standard and custom frequencies up to 2100 MHz Femto-second (f sec.) RMS phase jitter Short lead time Typical Applications Low noise synthesizer VCO reference Optical Communication
Ultra Low Phase Noise XO / VCXO
FEATURES: High "Q", 3rd Overtone Crystal Technology Ultra Low Phase Noise -162 Typ. @ 10k, 100MHz carrier Standard LVCMOS RF Output Wide Operating Temperature (-40ºC to +85ºC) standard ±28 ppm Max. All
CMOS, Ultra-low Jitter Voltage Controlled Crystal Oscillators (VCXOs)
GTJF538 series (5.0x3.2x1.4 mm, 8 pads), a member of Mercury QuikXO quick-turn Voltage Controlled Crystal Oscillators 9VCXOs), features CMOS output and femtosecond (f. sec.) RMS phase jitter (163 f. sec.
CARDINAL COMPONENTS, INC. The Cardinal Cappuccino Crystal Oscillator CMOS TCXO 10MHz - 250MHz
SERIES CJTA The Cardinal Cappuccino Crystal Oscillator CMOS TCXO 10MHz - 250MHz Features 3.3V supply voltage- configurable 10MHz to 250MHz CMOS outputsconfigurable Better than 2Hz tuning resolution Low
MEMS Oscillator, Low Power, LVCMOS, MHz to MHz
Features: MEMS Technology Direct pin to pin drop-in replacement for industry-standard packages LVCMOS Compatible Output Industry-standard package 2.0 x 1.6, 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, and 7.0 x 5.0
ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT
MEMS Oscillator Page 1 of 5 Ultra Low power: < 1 A Fixed 32.768 khz No Supply Voltage external bypass capacitors required XTAL replacement in 2.0 mm x 1.2 mm SMD SMD package 2.0 x 1.2 mm ELECTRICAL SPECIFICATIONS
ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT. Any Frequency between Frequency range, accurate to 6 decimal places
Page 1 of 5 Ultra low phase jitter: 0.5ps ( 12kHz to 20MHz ) LCMOS/ LTTL compatible output SMD package 7.0 x 5.0 mm ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION ALUE UNIT Min. Typ. Max. Frequency
ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT. Vs ±5% Vs ±5% Vs ±5%
Page 1 of 5 0.6 RMS Phase Jitter over 12 khz to 20 MHz bandwidth 31 Standard frequencies from 25 MHz to 212.5 MHz LPECL and LDS Output types SMD package 7.0 x 5.0 mm ELECTRICAL SPECIFICATIONS PARAMETER
S1903 and S1950 Series
Actual Size = 5 x 7mm Product Features 3.3V or 5V ACMOS/TTL compatible logic levels Very tight frequency stability available Fast clock edge rate Pin-compatible with standard 5x7mm packages Designed for
Packaging Outline. 7mm. FN A = Product Family. Frequency Stability *AA = ±20 ppm (-10 to +70 C) *A = ±25 ppm (-10 to +70 C)
Series Crystal Clock Oscillator (XO) 3.3V CMOS Low Jitter XO Actual Size = 5 x 7mm Product Features Less than 1.5 ps RMS jitter with non-pll design 3.3V CMOS/TTL compatible logic levels Pin-compatible
Excellent Integrated System Limited
Excellent Integrated System Limited Stocking Distributor Click to view price, real time Inventory, Delivery & Lifecycle Information: Abracon Corporation AST3TQ-T-10.000MHZ-50-C For any questions, you can
Solder Dip Options T = Standard S = Sn60Pb40 G=SAC305. Package 86 =Leaded 80 = Formed Leads 85=SMT
Description Q-Tech s 5x7mm LVDS and LVPECL hybrid oscillators consist of an IC operating at various supply voltages of 2.5V and 3.3Vdc and a miniature strip quartz crystal. The series is offered in various
IoT OPTIMIZED LOW PROFILE QUARTZ CRYSTAL
FEATURES APPLICATIONS Optimized for energy saving wearables and IoT applications Plated at exceptionally low plating capacitance, as low as 4pF, with optimized ESR.4 mm max height ideally suited for height
IoT OPTIMIZED LOW PROFILE QUARTZ CRYSTAL
FEATURES APPLICATIONS Optimized for energy saving wearables and IoT applications Plated at exceptionally low plating capacitance, as low as 4pF, with optimized ESR.75 mm max height ideally suited for height
Low-Jitter I 2 C/SPI Programmable CMOS Oscillator
Datasheet General Description The DSC2110 and series of programmable, highperformance CMOS oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability while incorporating
IoT OPTIMIZED LOW PROFILE QUARTZ CRYSTAL
FEATURES APPLICATIONS Optimized for energy saving wearables and IoT applications Plated at exceptionally low plating capacitance, as low as 4pF, with optimized ESR.6 mm max height ideally suited for height
HIGH FREQUENCY, LOW JITTER CLOCK OSCILLATOR
DESCRIPTION FEATURES + The XCO clock series is a cutting edge family of low to high frequency, low jitter output, single or multi - frequency clock oscillators. The XCO clocks are available in 7.0 x 5.0,
Pb RoHS. ASG-D Series; LVDS Output STANDARD SPECIFICATIONS: 7.0 x 5.0 x 1.9mm APPLICATIONS: FEATURES:
APPLICATIONS: Networking, SONET/SDH WiMax / WLAN Computing Phase Locked Loo Direct Digital Synthesis (DDS) DSL/ADSL Base Terminal Stations FEATURES: ASG series is a High Performance crystal based oscillator;
Parameters Symbol Min. Typ. Max. Unit Condition Frequency Range Output Frequency Range f MHz
Features Any frequency between 1 MHz and 110 MHz accurate to 6 decimal places Operating temperature from -40 C to +85 C. Refer to MO2018 for -40 C to +85 C option and MO2020 for -55 C to +125 C option
Logic & Supply Voltage: HC = HCMOS +5V L = LVHCMOS +3.3V P = LVPECL +3.3V
Description Q-Tech s surface-mount QTCV576 VCXOs consist of an IC 5Vdc,.Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic package with gold plated contact
LOW POWER TCXO & VCTCXO OSCILLATOR
PETERMANN-TECHNIK GmbH LOW POWER TCXO & VCTCXO OSCILLATOR SERIES TCVCTO-2 10.0 40.0 MHz FEATURES + 100% pin-to-pin drop-in replacement to quartz and MEMS based VCTCXO + Ultra Performance Oscillator for
ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT. 52 standard frequencies between 3.57MHz and MHz
Frequency Oscillator Page 1 of 6 Low Power Consumption of 3.5 typical at 1.8 52 Standard frequencies between 3.57MHz and 77.760 MHz HCMOS/ LCMOS compatible output SMD package 2.0 x 1.6 mm ELECTRICAL SPECIFICATIONS
Ultra-miniature, Low Power, kHz MEMS Oscillator
Moisture Sensitivity Level (MSL) 1 ESD Sensitive FEATURES: Smallest 32.768kHz TCXO in the market: 1.54 x 0.84 x 0.6mm Supply oltage: 1.5 to 3.63 Ultra-Low Current Consumption: 1.52µA max.(core current,
Additional parameters Parameter Min Typ Max. Units Condition Weight 1 g
Typical Applications Base Stations Test + Measurement Features Surface Mount Package Reflow Process Compatible Low Phase Noise Build in PLL-Circuit Output range Standard frequencies 1 MHz 185 MHz 1; 25;
Typical Applications Base Stations Test Equipment Synthesizers. Frequency stabilities 1 [Standard]
![Typical Applications Base Stations Test Equipment Synthesizers. Frequency stabilities 1 [Standard]](/thumbs/96/128719484.jpg "Typical Applications Base Stations Test Equipment Synthesizers. Frequency stabilities 1 [Standard]")
PX-701 Clock Oscillator Features Reflow Process Compatible Surface Mount Package AT-Cut Crystal SONET Minimum Clock Specification Low Phase Noise Tight Tolerances Typical Applications Base Stations Test
XCO FAST TURNAROUND CLOCK OSCILLATOR HIGH FREQUENCY, LOW JITTER CLOCK OSCILLATOR FEATURES + DESCRIPTION SELECTOR GUIDE LVCMOS LVDS LVPECL
XCO FAST TURNAROUND DESCRIPTION FEATURES + The XCO clock series is a cutting edge family of low to high frequency, low jitter output, single or multi - frequency clock oscillators. The XCO clocks are available
QTCT570 SERIES 5 x 7mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to MHz Description
Description Q-Tech s surface-mount QTCT570 oscillators consist of an IC 2.8Vdc, 3.3Vdc clock TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range
SiT to 725 MHz Ultra-low Jitter Differential Oscillator
SiT9367 220 to 725 MHz Ultra-low Jitter Differential Oscillator Features Any frequency between 220.000001 MHz and 725 MHz, accurate to 6 decimal places. For HCSL output signaling, maximum frequency is
QTCT350 SERIES 3.2 x 5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 5.0Vdc MHz to 52.
Description Q-Tech s surface-mount QTCT350 oscillators consist of an IC 3.3Vdc, 5.0Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from
VS-507 Voltage Controlled SAW Oscillator
VS-507 Voltage Controlled SAW Oscillator VS-507 Description The VS-507 VCSO (Voltage Controlled Saw Oscillator from Vectron is an ultra high frequency, ultra low phase noise oscillator. The VS-507 provides
VC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
Ultra-Low Phase Noise OCXO
APPLICATIONS: COTS Military & Industrial Radios & Timing Circuits Cellular Infrastructure Radar Systems Test & Measurement Equipment GPS Tracking with precision hold-over accuracy WiMax / WLAN Precision
PS-701 SAW Oscillator
PS-701 SAW Oscillator PS-701 The PS-701 SO (Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support high speed data converters and 100G / 400G coherent optical
Performance Specifications
TX-502 Temperature Compensated Crystal Oscillator High Precision TX-502 Features High Precision TCXO OCXO Replacement OCXO Temperature Performance Low power consumption Tight Tolerances Frequency range
Ultra-miniature, Low Power, kHz MEMS Oscillator
ESD Sensitive Moisture Sensitivity Level (MSL) 1 FEATURES: APPLICATIONS: Ultra-miniature size: Supply oltage: 1.2 to 3.63 (-10 ~ +70); 1.5 to 3.63 (-40 ~ +85) Ultra-Low Current Consumption: 1.4µA max.
Reflow Process Compatible Low Phase Noise Build in PLL-Circuit
Typical Applications Base Stations Features Surface Mount Package Reflow Process Compatible Low Phase Noise Build in PLL-Circuit Output Frequency range Standard frequencies 10 MHz 700 MHz 10; 25; 26; 39.3216;
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 The VS-701 VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
VS-504 Dual Frequency VCSO High Frequency
VS-504 Dual Frequency VCSO High Frequency VS-504 The VS-504 dual frequency VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
Low-Jitter Precision LVDS Oscillator
General Description The DSC0 & series of high performance oscillators utilizes a proven silicon MEMS technology to provide excellent jitter and stability over a wide range of supply voltages and temperatures.
Ultra-miniature, Low Power, kHz MEMS Oscillator
ESD Sensitive Moisture Sensitivity Level (MSL) 1 FEATURES: APPLICATIONS: Factory programmable output frequency: 1Hz to 32.768kHz Available in two types of ultra-miniature packages: 2.0 x 1.2 x 0.6mm (SMD);
32.768kHz IoT Optimized SMD Crystal
FEATURES Electrical Specifications Industry s smallest Tuning Fork Crystal (1.20 x 1.00 x 0.35 mm package) Ideally suited for space constraint IoT, Wearables & Wireless applications Simultaneously optimized
Programmable Low-Jitter Precision LVDS Oscillator
General Description The & series of high performance fieldprogrammable oscillators utilizes a proven silicon MEMS technology to provide excellent jitter and stability over a wide range of supply voltages
Logic & Supply Voltage: HC = HCMOS +5V L = LVHCMOS +3.3V P = LVPECL +3.3V
. and 5.0Vdc -.000MHz to 56.2MHz Description Q-Tech s surface-mount QTCV56 VCXOs consist of an IC 5Vdc,.Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic
Parameters Symbol Min. Typ. Max. Unit Condition Frequency Range. Frequency Stability and Aging ppm ppm ppm ppm
Features Frequencies between 115.194001 MHz to 137 MHz accurate to 6 decimal places Operating temperature from -40 C to +125 C. For -55 C option, refer to MO8920 and MO8921 Supply voltage of +1.8V or +2.5V
SiT MHz to 725 MHz Ultra-low Jitter Differential VCXO
SiT3373 220 MHz to 725 MHz Ultra-low Jitter Differential VCXO Features Any frequency between 220.000001 MHz and 725 MHz accurate to 6 decimal places Widest pull range options: ±25, ±50, ±80, ±100, ±150,
LOW POWER PROGRAMMABLE OSCILLATOR
LOW POWER PROGRAMMABLE OSCILLATOR SERIES LPOP 115.0 137.0 MHz FEATURES + High Frequency Programmable Low Power Oscillator for Low Cost + Excellent long time reliability + Excellent total frequency stability
Parameters Symbol Min. Typ. Max. Unit Condition Frequency Range Output Frequency Range f MHz
Features Any frequency between 1 MHz and 110 MHz accurate to 6 decimal places 100% pin-to-pin drop-in replacement to quartz-based XO Excellent total frequency stability as low as ±20 ppm Operating temperature
Programmable Low-Jitter Precision HCSL Oscillator
Programmable LowJitter Precision HCSL Oscillator General Description The & series of high performance fieldprogrammable oscillators utilizes a proven silicon MEMS technology to provide excellent jitter
VC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1., 2.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 125 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
Preliminary Rev. M Accusilicon AS318-B Series Professional Audiophile Crystal Oscillator
Accusilicon AS318-B Series Professional Audiophile Crystal Oscillator Features Extremely low close-in phase noise, designed for professional Audiophile & Recording application. Typical -100dBc @ 10Hz at
C5310. Tight Stability. 1 MHz 700 MHz
Typical Applications Base Stations Test Equipment Switching Portable Equipment Frequency range Standard frequencies Features Surface Mount Package Reflow Process Compatible AT-Cut Crystal Low Phase Noise
Oven Controlled Crystal Oscillators
Moisture Sensitivity Level (MSL) 1 OERIEW: Abracon s AOCJYR series of World s Smallest Profile, Surface Mount- Ovenized Quartz Crystal Oscillators are based on Proprietary MercuryTM ASIC technology, patented
PERFORMANCE PLASTIC PACKAGE ULTRA MINIATURE PURE SILICON TM CLOCK OSCILLATORS ASDMP Series
ASDMP Series FEATURES: Ultra Miniature Pure SiliconTM Clock Oscillator High Performance MEMS Technology by Discera Low Power Consumption for high speed communication Exceptional Stability Over Temp. at
DSC2011. Low-Jitter Configurable Dual CMOS Oscillator. General Description. Features. Block Diagram. Applications
General Description The DSC2011 series of high performance dual output CMOS oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability while incorporating additional
SiT9156 LVPECL, LVDS Oscillator (XO) with 0.3 ps Jitter for 10Gb Ethernet
Features 0.3 ps RMS phase jitter (random) for 10GbE applications Frequency stability as low as ±10 PPM 100% drop-in replacement for quartz and SAW oscillators Configurable positive frequency shift, +25,
VS-800 Ultra-Low Jitter High Frequency VCSO
VS-800 Ultra-Low Jitter High Frequency VCSO VS-800 Description The VS-800 is a Voltage Controlled SAW Oscillator that operates at the fundamental frequency of the internal SAW resonator. The SAW resonator
Preliminary. 2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Frequency 8 to 1500 MHz 2.2 Operating Temperature Range
RXO5032P SMD Clock Oscillator () High Performance XO in 5 x 3.2 mm Surface Mount package Product description The RXO5032P XO combines very low RMS phase jitter and tight frequency stability in a small
Programmable Low-Jitter Precision CMOS Oscillator
DSC8121 General Description The DSC8101 & DSC8121 series of high performance fieldprogrammable oscillators utilizes a proven silicon MEMS technology to provide excellent jitter and stability over a wide
VX-805 Voltage Controlled Crystal Oscillator
VX-805 Voltage Controlled Crystal Oscillator VX-805 Description The VX-805 is a Voltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
LOW POWER SPREAD SPECTRUM OSCILLATOR
LOW POWER SPREAD SPECTRUM OSCILLATOR SERIES LPSSO WITH SPREAD-OFF FUNCTION 1.0 110.0 MHz FEATURES + 100% pin-to-pin drop-in replacement to quartz and MEMS based XO + Low Power Spread Spectrum Oscillator
EMI Reduction Spread Spectrum Clock Oscillators 3HM572 Series Group R
The most efficient way to reduce EMI (Electromagnetic Interference) is to reduce it from its principle source the clock oscillator. Mercury 3HM572, an integrated clock module composed of a spread spectrum
Frequency Translator / Jitter Attenuator
Moisture Sensitivity Level (MSL) This product is not Moisture Sensitive MSL = N/A: Not Applicable FEATURES: APPLICATIONS: Frequency translation, clock smoothing and jitter attenuation of the input 5x7x2
VT-802 VT-802. Temperature Compensated Crystal Oscillator. Description
T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,
Low-Jitter Precision LVPECL Oscillator
DSC0 General Description The DSC0 & series of high performance oscillators utilizes a proven silicon MEMS technology to provide excellent jitter and stability over a wide range of supply voltages and temperatures.
LOW POWER PROGRAMMABLE OSCILLATOR
LOW POWER PROGRAMMABLE OSCILLATOR SERIES LPOP 1.0 110.0 MHZ FEATURES + Low Power Programmable Oscillator for Low Cost + Excellent long time reliability + Frequency range of 1 MHz and 110 MHz accurate to
TEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR
TEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR ASTX-12, ASVTX-12 FEATURES: 2.5 X 2.0 X 0.9mm APPLICATIONS: Ultra miniature and low height 0.9mm. Low current consumption 2mA. Vc function
TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator
TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator TX-707 The TX-707 Series TCXO combines innovative manufacturing and the latest technology to provide low phase noise and excellent g-sensitivity.
DSC1033. General Description
DSC1.V LowPower CMOS Oscillator General Description The DSC1 is a.v fixed frequency MEMS based PureSilicon Oscillator. It can be factory programmed to any frequency from 1 to 15MHz. The DSC1 incorporates
Description. Block Diagrams. Figure 1b. Crystal-Based Multiplier w/saw
C-501 oltage Controlled Crystal Oscillator C-501 Description The C-501 is a voltage controlled crystal oscillator that is housed in a hermetic 14.0 x 9.0 x 4.5mm ceramic package. Depending upon the frequency
Ultra-Low Phase Jitter SMD Clock Oscillator
ASMX Moisture Sensitivity Level MSL 3 FEATURES: Excellent integrated phase jitter ±50ppm total frequency stability over -40 C to +85 C temperature range Output Type: LCMOS, LDS, LPECL, HCSL Industry standard
Low Power (na Current Consumption) KHz ME831, ME832, ME833, ME834 Series
Features: ME83x is a 32.768 KHz CMOS output TCXO with a maximum frequency stability of ± 5 ppm (± 2.62 minutes / year) over -0 to +85 C, much better time-keeping accuracy than the competition. A proprietary
PX-421 Crystal Oscillator
PX-421 Crystal Oscillator PX-421 PX-421 PX-421 PX-421 Features Frequency: 10 KHz to 125 MHz 4 Pin 1/2 DIP Package with Through Hole and SMD lead optio Fully RoHS Compliant * No pure tin is used in this
VC-711 Differential (LVPECL, LVDS) Crystal Oscillator
C-7 Differential (LPECL, LDS) Crystal Oscillator C-7 Description ectron s C-7 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off either a 2.5 or 3.3 volt power supply
DSC2022. Low-Jitter Configurable Dual LVPECL Oscillator. Features. General Description. Block Diagram. Applications
General Description The DSC2022 series of high performance dual output oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability while incorporating additional device
Logic & Supply Voltage: L = LVHCMOS +3.3V at 15pF N=LVHCMOS +2.5V at 15pF R = LVHCMOS +1.8V at 15pF
Description Q-Tech s surface-mount QTCC230 oscillators consist of an IC 3.3Vdc, 2.5Vdc, and 1.8Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic package
Synchronized Crystal Oscillator, General Requirements. AH-ASCMXXXG-X Series PATENT PENDING
PATENT PENDING Description The Synchronized Crystal Oscillator is intended for use in the system, which requires multiple clocks in different nodes of the system to run synchronously in frequency without
High Performance MEMS Jitter Attenuator
Moisture Sensitivity Level: MSL=1 FEATURES: APPLICATIONS: Low power and miniature package programmable jitter attenuator 1/10/40/100 Gigabiy Ethernet (GbE) Input frequency up to 200MHz SONET/SDH Output
VX-503 Voltage Controlled Crystal Oscillator
VX3 Voltage Controlled Crystal Oscillator VX3 Features Description The VX3 voltage controlled crystal oscillator expands VI s advanced VCXO performance capabilities while adhering to a package footprint
SiT2002B High Frequency, Single Chip, One-output Clock Generator
Features Any frequency between 115 MHz to 137 MHz accurate to 6 decimal places of accuracy Operating temperature from -40 C to 85 C. Refer to SiT2019 for -40 C to 125 C and SiT2021 for -55 C to 125 C options
DSC1001. Low-Power Precision CMOS Oscillator. General Description. Features. Benefits. Block Diagram
DSC.8~.V LowPower Precision CMOS Oscillator General Description The DSC is a silicon MEMS based CMOS oscillator offering excellent jitter and stability performance over a wide range of supply voltages
MX-600 Microprocessor Controlled Crystal Oscillator High Precision
MX-600 Microprocessor Controlled Crystal Oscillator High Precision MX-600 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-40
VVC4 Voltage Controlled Crystal Oscillator
C4 oltage Controlled Crystal Oscillator Features ectron s Smallest CXO, 5.0 X 3.2 X 1.2 mm High Frequencies to 77.70 MHz 5.0 or 3.3 operation Linearity 10% Tri-State Output for testing Low jitter < 1ps
MX-503 Microprocessor Controlled Crystal Oscillator High Precision
MX-503 Microprocessor Controlled Crystal Oscillator High Precision MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50
PECL, LVDS, CMOS Output Low Jitter SMD Crystal Oscillator
PECL, LDS, CMOS Output Low Jitter SMD Crystal Oscillator 7. x. x 1.mm Moisture Sensitivity Level (MSL) This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES:
TX-500 Temperature Compensated Crystal Oscillator
TX-500 Temperature Compensated Crystal Oscillator TX-500 Features Low Phase Noise Low power consumption Output: HCMOS, Clipped Sinewave, PECL, True Sinewave Tight Tolerances Frequency range 1 of 6.4-160
VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator
VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator Features 2.5 or 3.3 V LVDS 3rd Overtone Crystal for best jitter performance Output frequencies to 270 MHz Low Jitter < 1 ps rms, 12kHz to 20MHz Enable/Disable output
Crystals Oscillators Filters Precision Timing Magnetics Engineered Solutions
Magnetics Engineered Solutions WWW.ABRACON.COM Introduction Purpose: Objectives: Content: Learning Time: Introduce the ASG series, Fixed Frequency XO & VCXO - Explain the benefits of the ASG series of
Other Options Available For An Additional Charge Hot Solder Dip Sn60/Pb40 per MIL-PRF Specifications subject to change without prior notice.
6QeOdUbfUaZ Q-Tech s surface-mount QTCC570 oscillators consist of an IC 5Vdc, 3.3Vdc, 2.5Vdc, and.8vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic
Oven Controlled Crystal Oscillators
Moisture Sensitivity Level (MSL) 1 OVERVIEW: Abracon s series of World s Smallest Profile, Surface Mount- Ovenized Quartz Crystal Oscillators are based on Proprietary MercuryTM ASIC technology, patented
Ultra-miniature, Low Power, kHz SMD MEMS Oscillator
ESD Sensitive Moisture Sensitivity Level (MSL) 1 FEAURES: Ultra-miniature size: Supply Voltage: 1.5V to 3.63V Ultra-Low Current Consumption: 1.0µA typ.(no load) Frequency Stabilities include: ±75ppm over
Tfs248e.doc version VI TELEFILTER Filter specification TFS 248 E 1/5. D a t a typ. Value Limit
Filter specification TFS 248 E 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances at f c *) Input: 560 Ω -5.9pF Characteristics Output: 500 Ω -6.3 pf Remark:
VX-705 Voltage Controlled Crystal Oscillator
X-705 oltage Controlled Crystal Oscillator X-705 Description The X-705 is a oltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
Oven Controlled Crystal Oscillators
Moisture Sensitivity Level (MSL) 1 OVERVIEW: Abracon s AOCJYR series of World s Smallest Profile, Surface Mount- Ovenized Quartz Crystal Oscillators are based on Proprietary MercuryTM ASIC technology,