PECL, LVDS, CMOS Output Low Jitter SMD Crystal Oscillator

Transcription

1 PECL, LDS, CMOS Output Low Jitter SMD Crystal Oscillator 7. x. x 1.mm Moisture Sensitivity Level (MSL) This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES: Low Jitter <1 phase jitter RMS PECL, LDS, CMOS Output APPLICATIONS: SONET, PCI Express, SERDES, ideo Anywhere Low Jitter is required Common Key Electrical Specifications Frequency Range: CMOS LDS PECL Operating Temperature: Storage Temperature: Overall Frequency Stability*: dd = 3.3 Supply oltage (dd): dd =. Tri-state function : Aging: "1" (IH.7*dd) or Open: Oscillation "" (IH<.3*dd) : Hi Z "" (IH<.3*dd) or Open: Oscillation "1" (IH.7*dd) : Hi Z - + C Fundamental 3-Overtone 3-Overtone 3-Overtone See options C ppm See options Standard Option 1 MHz CMOS, LDS, PECL 1 PECL (Option P) C First year * Inclusive of C, operating temperature range, input voltage variation, load variation, aging, shock, and vibration. ** Transition times are measured between % and 9% of dd with an output load of 1 pf. Key Electrical Specifications for PECL Supply Current (Idd): Output oltage: Symmetry: Start-up Time : Rise/Fall Time (Tr/Tf): Phase jitter RMS (1kHz to MHz): OH OL dd- dd dd-. dd % ms ns.~ MHz dd=3.3,..~ MHz ~1.999 MHz 9.~ MHz.~ MHz REISED: 1 Hidden Creek Lane Spicewood TX 7669 Phone: Fax: //16 ISO91-

2 PECL, LDS, CMOS Output Low Jitter SMD Crystal Oscillator 7. x. x 1.mm (Continued)... khz -14.~ MHz khz ~ MHz m m m Period jitter RMS Offset MHz carrier Phase Noise. MHz carrier ( value): 1. MHz carrier 16. MHz carrier 1kHz dbc Key Electrical Specifications for LDS m m m ± ±. ua % Supply Current (Idd) Output Differential oltage (OD) od Magnitude Change ( od) Offset oltage [RL=Ω] (Os) Offset Magnitude Change [RL=Ω] ( Os) OH Output oltage: OL Power-off Leakage (Ioxd) [out=dd or GND, dd=] Symmetry Start-up Time Rise/Fall Time [RL=Ω, CL=pF] (Tr/Tf): Phase jitter RMS (1kHz to MHz) Period jitter RMS 4 ms ns 6.~ MHz 6.~ MHz 6.~ MHz 6.~ MHz REISED: 1 Hidden Creek Lane Spicewood TX 7669 Phone: Fax: //16 ISO91-

3 PECL, LDS, CMOS Output Low Jitter SMD Crystal Oscillator 7. x. x 1.mm (Continued) Phase Noise ( value): Offset 1kHz khz khz MHz carrier. MHz carrier 1. MHz carrier 16. MHz carrier dbc Key Electrical Specifications for CMOS Supply Current (Idd): Output Load : Start-up Time : OH OL Output Drive Current 3pF load (IOSD) [OL =.4, OH =.4 ] Symmetry: Output oltage: Rise/Fall Time (Tr/Tf).9*dd 4.1*dd ~1.999 MHz 4.~6.999 MHz 9.~ MHz pf ms ~1.999 MHz 4.~6.999 MHz 9.~ MHz % ns ~1.999 MHz 4.~6.999 MHz 9.~ MHz REISED: 1 Hidden Creek Lane Spicewood TX 7669 Phone: Fax: //16 ISO91-

4 PECL, LDS, CMOS Output Low Jitter SMD Crystal Oscillator 7. x. x 1.mm (Continued) 1kHz khz khz Phase jitter RMS (1kHz to MHz) Period jitter RMS Phase Noise ( value): Offset. MHz carrier. MHz carrier. MHz carrier. MHz carrier ~1.999 MHz 4.~6.999 MHz 9.~ MHz ~1.999 MHz 4.~6.999 MHz 9.~ MHz dbc OPTIONS AND PART IDENTIFICATION: (Left Blank If Standard) ABNM - MHz - - Packaging Blank: Bulk T: Tape & Reel Supply oltage Blank: 3.3 :. Frequency in MHz Please specify the frequency in MHz. e.g MHz Operating Temp. Blank: C ~ +7 C D: - C ~ +6 C E: - C ~ +7 C F: -3 C ~ +7 C N: -3 C ~ + C L: -4 C ~ + C Overall Freq. Stability Blank: ±ppm R: ±ppm K: ±3ppm H: ±3ppm PIN 1 logic level* Output State Output P1: PECL1 : LDS C: CMOS TRI-STATE PIN OPERATION: Output Type Option 1,C LDS,CMOS 1(Default) *Connect to DD for logic level "1", connect to ground for logic level "". P1 PECL1 Enabled Tri-state Tri-state Enabled 1 Hidden Creek Lane Spicewood TX 7669 Phone: Fax: REISED: 6//16 ISO91: CE RTIFIED

5 PECL, LDS, CMOS Output Low Jitter SMD Crystal Oscillator OUTLINE DRAWING: 7. x. x 1.mm For CMOS Output Pin Function 1 Tri-State GND/Case 3 Output 4 dd For PECL and LDS Output Note: Recommend using an approximately.1uf bypass capacitor between PIN 3 and 6. Pin # Function 1 Tri-state NC 3 GND 4 Q 6 dd 1 Hidden Creek Lane Spicewood TX 7669 Phone: Fax: Dimensions: inches (mm) REISED: 6//16 ISO91-

6 PECL, LDS, CMOS Output Low Jitter SMD Crystal Oscillator 7. x. x 1.mm REFLOW PROFILE: TAPE & REEL: T= Tape and reel (1,pcs/reel) Dimensions: mm Need a test socket for the ABNM Series? To view compatible PRECISION TEST & BURN-IN SOCKETS for these parts, click here. ATTENTION:Abracon Corporation s products are COTS Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. 1 Hidden Creek Lane Spicewood TX 7669 Phone: Fax: REISED: 6//16 ISO91-