AMJD-SERIES. fout = 27MHz, VDD=1.8V,

Transcription

1 FEATURES APPLICATIONS Output selectable between 2 frequencies Compact footprint as small as 1.6x1.2mm Low power consumption 1MHz to 100MHz output frequency range Short lead time for new frequencies Wide -40 C to +85 C operating temperature range Low operating current: 3mA IDD (typ) Wearables Internet of Things (IoT) Industrial IoT Audio and video Drones and robotics ELECTRICAL SPECIFICATIONS Electrical characteristics unless otherwise indicated, VDD =1.8V -5% to 3.3V +10%, temperature range -40ºC to 85 ºC Parameters Min. Frequency Range Power Supply Voltage (VDD) Max. Units MHz V Current Consumption (IDD) Typ. 3.0 ma fout = 27MHz, VDD=1.8V, See Options Operating Temperature Range C Storage Temperature C All Inclusive Frequency Stability Aging Duty Cycle Output Logic Levels Input Logic Levels Logic High VOH ppm ppm No Load Options D or F Options E or G 1st % Std Drive option: I = 3mA 0.8*VDD V Logic Low VOL Logic High VIH Note 0.2*VDD 0.7*VDD High Drive option: I = 6 ma Std Drive option: I = -3mA High Drive option: I = -6 ma V Logic Low VIL 0.3*VDD Enable Pull-Up Resistor Power Supply Ramp (tpu) Start-up Time (tsu) 100 ms Time to 90% targeted VDD 1.3 ms From 90% VDD to valid clock 25ºC

2 ELECTRICAL SPECIFICATIONS Parameters min Typ. Max. Units Note 40 Frequency Select Switching Time (tfs) CL = 15 pf VDD =1.8V CL = 15 pf VDD =2.5V/3.3V High Drive Rise(Tr)/Fall (Tf) Time ns CL = 10 pf VDD =2.5V/3.3V RMS Period Jitter fout= 27 MHz VDD = 1.8 V Cycle-to-Cycle Jitter (Peak) fout= 27 MHz Typ. Max. Units Std Drive CL = 10 pf VDD =1.8V ps ps VDD = 2.5V/3.3V VDD = 1.8 V VDD = 2.5V/3.3V ABSOLUTE MAXIMUM RATINGS Parameters min Supply Voltage V Input Voltage -0.3 VDD+0.3 V +150 ºC Maximum Junction Temperature Note Ambient Operating Temperature ºC Industrial Ambient Operating Temperature ºC Extended Commercial Storage Ambient Temperature Range ºC Soldering Temperature +260 ºC 40 Sec Maximum 4 kv HBM, 400V MM, 2 kv CDM ESD Protection

3 OPTIONS AND PART IDENTIFICATION AMJD (1): Package Size G : 1.6 x 1.2 mm A : 2.0 x 1.6 mm D : 2.5 x 2.0 mm E : 3.2 x 2.5 mm (2): Stability over OTR D: ±25ppm over -20 C to +70 C E: ±50ppm over -20 C to +70 C F: ±25ppm over -40 C to +85 C G: ±50ppm over -40 C to +85 C Part Number Example: AMJDGGJ-A01T **MOQ per package: 1.6x1.2mm: 100pcs/bag 2.0x1.6mm: 100pcs/bag 2.5x2.0mm: 140 pcs/tube 3.2x2.5mm: 110 pcs/tube Frequency Code A01 A02 A03 A04 A05 A06 A07 A08 (4): Output Frequencies See table 1 for Common dual frequency pairs. Contact Abracon for custom frequency pairs. (3): Output Drive/Pin 1 Function Option Output Drive Pin 1 Function H Standard Frequency Select J High Frequency Select Frequency 1 Frequency MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz Frequency Code A09 A10 A11 A12 A13 A14 A15 A16 Frequency 1 (5): Packaging Blank: Bulk** T: Tape & Reel (1kpcs / reel) T3: Tape & Reel (3kpcs / reel) Frequency MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz For Quick turn-around programmable sample orders less than MOQ represented above: Due to the immediate availability of stock and the qty of the order, the parts may be delivered as Cut Tape, Loose parts in Antistatic Bag or in Tube(s). For orders equal to or greater than MOQ and less than 1000pcs: Due to packaging, the order must be a multiple of MOQ per package size above For orders equal to or greater than 1000pcs: Bulk is not an option. Please refer to tape and reel packaging.

4 TYPICAL PERFORMANCE 25ºC ± 3ºC Current Consumption vs Frequency Current Consumption vs Supply Voltage PIN FUNCTIONS Pin Number Pin Name 1 FS GND Output VDD Description : High or Open = Frequency 1 Frequency Select Low = Frequency 2 Power Supply Ground Oscillator Clock Output Power Supply Note 2 Note 1&3 Notes : frequency 2 will be engaged on pin 3. DD pin as possible.

5 OUTPUT BUFFER OPTIONS respective output currents of greater than 3 ma and 6 ma at 20% to 80% of the supply voltage. For loads of 15 pf or higher, the high-drive option is recommended. DIAGRAMS Output Waveform Test Circuit Recommended Board Layout

6 MARKING 1.6 mm x 1.2 mm VFLGA 2.0 mm x 1.6 mm VFLGA Lot Code Internal Code SSS Blank: Quick turn-around programmable orders < 1000pcs XXXX: Internal frequency 2.5 mm x 2.0 mm VLGA 3.2 mm x 2.5 mm DFN e.g Internal Code YYWW OSSS YY (Year): e.g. 18 for 2018 WW (Week): e.g. 08 for the 8th week of the year Lot Code

7 MECHANICAL DIMENSIONS 1.6 x 1.2 mm VFLGA Package Outline Top View Side View Bottom View Description Marker Number of Terminals Terminal Pitch Terminal Pitch Overall Height Dimensions (mm) N 4 e e1 A A BSC 0.75 BSC 0.84 ± Substrate Thickness (with Terminals) A3 0.20REF Overall Length Overall Width Terminal Width Terminal Width D E b1 b2 1.60BSC 1.20BSC 0.30 ± ± 0.05 Terminal Length Terminal 1 Index Chamfer L CH 0.35 ± Dimensioning and tolerance per ASME Y14.5M BSC: Basic Dimension. Theoretically exact value shown without tolerances REF: Reference Dimension, usually without tolerance, for information purposes only

8 MECHANICAL DIMENSIONS Recommended Landing Pattern Description Contact Pitch Contact Pitch Contact Spacing Contact Width Contact Width Contact Pad Length Space Between Contacts Space Between Contacts Contact 1 Index Chamfer Marker E1 E2 C X1 X2 Y G1 G2 CH Max Typ Max Unit 1.20 BSC 1.16 BSC mm x 45º REF Dimensioning and tolerance per ASME Y14.5M BSC: Basic Dimension. Theoretically exact value shown without tolerances REF: Reference Dimension, usually without tolerance, for information purposes only

9 MECHANICAL DIMENSIONS 2.0 x 1.6 mm VFLGA Package Outline Side View Top View Bottom View Description Marker Number of Terminals Terminal Pitch Terminal Pitch Overall Height Dimensions (mm) N 4 e e1 A A BSC 0.95 BSC 0.84 ± Substrate Thickness (with Terminals) A REF Overall Length Overall Width Terminal Width Terminal Width Terminal Length D E b1 b2 L 2.00 BSC 1.60 BSC 0.35 ± ± ± 0.05 Terminal 1 Index Chamfer CH 0.15 Dimensioning and tolerance per ASME Y14.5M BSC: Basic Dimension. Theoretically exact value shown without tolerances REF: Reference Dimension, usually without tolerance, for information purposes only

10 MECHANICAL DIMENSIONS Recommended Landing Pattern Description Contact Pitch Contact Spacing Contact Width Contact Width Marker E2 C X1 X2 Contact Pad Length Y Space Between Contacts Space Between Contacts Contact 1 Index Chamfer G1 G2 CH Max Typ Max Unit 1.55 BSC mm x 45º REF Dimensioning and tolerance per ASME Y14.5M BSC: Basic Dimension. Theoretically exact value shown without tolerances REF: Reference Dimension, usually without tolerance, for information purposes only

11 MECHANICAL DIMENSIONS 2.5 x 2.0 mm VLGA Package Outline Top View Side View Bottom View Description Marker Number of Terminals Terminal Pitch Terminal Pitch Overall Height Dimensions (mm) N 4 e e1 A A BSC 1.25 BSC 0.84 ± Substrate Thickness (with Terminals) A3 0.20REF Overall Length Overall Width Terminal Width Terminal Length Terminal 1 Index Chamfer D E b1 L CH 2.50BSC 2.00BSC 0.65± ± Dimensioning and tolerance per ASME Y14.5M BSC: Basic Dimension. Theoretically exact value shown without tolerances REF: Reference Dimension, usually without tolerance, for information purposes only

12 MECHANICAL DIMENSIONS Recommended Landing Pattern Description Contact Pitch Contact Spacing Contact Width Contact Width Contact Pad Length Space Between Contacts Space Between Contacts Contact 1 Index Chamfer Marker E C X1 X2 Y G1 G2 CH Max Typ Max Unit 1.65 BSC mm x 45º REF Dimensioning and tolerance per ASME Y14.5M BSC: Basic Dimension. Theoretically exact value shown without tolerances REF: Reference Dimension, usually without tolerance, for information purposes only

13 MECHANICAL DIMENSIONS 3.2 x 2.5 mm DFN Package Outline Top View Side View Recommended Landing Pattern Bottom View Dimensions : mm

14 REFLOW PROFILE Zone Description 1 Preheat / Soak 2 3 Peak heat Temperature Time TSMIN ~ TSMAX 60 ~ 180 sec. 150 C ~ 200 C TL 60 ~ 150 sec. 217 C TP sec. MAX. 255 C C

15 PACKAGING Bulk MOQ= 100pcs/Bag* T= 1,000pcs/reel (D=180mm) T3= 3,000pcs/reel (D=180mm) 1.6 mm x 1.2 mm VFLGA A0 B0 K0 F 1.40 ± ± ± ± 0.05 P ± 0.10 W /-0.10 Dimensions : mm * For Quick turn-around programmable sample orders less than MOQ represented above: Due to the immediate availability of stock and the qty of the order, the parts may be delivered as Cut Tape, Loose parts in Antistatic Bag or in Tube(s). For orders equal to or greater than MOQ and less than 1000pcs: Due to packaging, the order must be a multiple of MOQ per package size above For orders equal to or greater than 1000pcs: Bulk is not an option. Please refer to tape and reel packaging.

16 PACKAGING Bulk MOQ= 100pcs/Bag* T= 1,000pcs/reel (D=180mm) T3= 3,000pcs/reel (D=180mm) 2.0 mm x 1.6 mm VFLGA A0 B0 K0 F P1 W 1.90 ± ± ± ± ± /-0.10 Dimensions : mm * For Quick turn-around programmable sample orders less than MOQ represented above: Due to the immediate availability of stock and the qty of the order, the parts may be delivered as Cut Tape, Loose parts in Antistatic Bag or in Tube(s). For orders equal to or greater than MOQ and less than 1000pcs: Due to packaging, the order must be a multiple of MOQ per package size above For orders equal to or greater than 1000pcs: Bulk is not an option. Please refer to tape and reel packaging.

17 PACKAGING Bulk MOQ= 140pcs/Tube* T= 1,000pcs/reel (D=180mm) T3= 3,000pcs/reel (D=180mm) 2.5 mm x 2.0 mm VLGA A0 B0 K0 F P1 W 2.25± ± ± ± ± /-0.10 Dimensions : mm * For Quick turn-around programmable sample orders less than MOQ represented above: Due to the immediate availability of stock and the qty of the order, the parts may be delivered as Cut Tape, Loose parts in Antistatic Bag or in Tube(s). For orders equal to or greater than MOQ and less than 1000pcs: Due to packaging, the order must be a multiple of MOQ per package size above For orders equal to or greater than 1000pcs: Bulk is not an option. Please refer to tape and reel packaging.

18 PACKAGING Bulk MOQ= 110pcs/Tube* T= 1,000pcs/reel (D=180mm) T3= 3,000pcs/reel (D=180mm) 3.2 mm x 2.5 mm DFN Dimensions : mm * For Quick turn-around programmable sample orders less than MOQ represented above: Due to the immediate availability of stock and the qty of the order, the parts may be delivered as Cut Tape, Loose parts in Antistatic Bag or in Tube(s). For orders equal to or greater than MOQ and less than 1000pcs: Due to packaging, the order must be a multiple of MOQ per package size above For orders equal to or greater than 1000pcs: Bulk is not an option. Please refer to tape and reel packaging.