Excellent Integrated System Limited
|
|
|
- Emma Arleen Hart
- 5 years ago
- Views:
Transcription
1 Excellent Integrated System Limited Stocking Distributor Click to view price, real time Inventory, Delivery & Lifecycle Information: Abracon Corporation AST3TQ-T MHZ-50-C For any questions, you can us directly:
2 Moisture Sensitivity Level (MSL) 3 FEATURES: Standard available frequencies: 10.00, 12.80, , 19.20, 19.44, 20.00, , 25.00, 26.00, 30.72, MHz LVCMOS Output or Clippled Sine Wave output Frequency stability: ±50ppb over -40ºC to +85ºC operating temperature range Excellent Phase Noise, Harmonics and Spurious content Typical rms jitter of 40MHz carrier & 10MHz carrier over 12kHz to 20MHz BW APPLICATIONS: COTS Military Radios & other Communication Hardware WiMax, LTE, BTS CATV, LAN, LMDS GPS Tracking with Hold-Over accuracy Test & Measurement Equipment Point-to-Point communication networks STANDARD SPECIFICATIONS: Maximum Rating Parameters Storage Temperature Range Supply Voltage Control Voltage ESD, HBM/CDM/MM Rating -55 to +125 C -0.5 to 6V 0 to 3V 4kV/2kV/200V Key Electrical Specifications Parameters Minimum Typical Maximum Units Notes Frequency Range MHz Standard Frequencies 10.00, 12.80, , 19.20, 19.44, 20.00, , 25.00, 26.00, 30.72, MHz Initial Frequency Tolerance (@+25 C) at shipping ±500 ppb Relative to carrier Frequency Stability Options -40 C to +85 C ±50 ppb Frequency Stability vs. Supply Voltage Change (Vdd±5%) ±100 ppb Frequency Stability vs. Load Change (Load±5%) ±200 ppb Aging (first C) ±1.0 ppm Aging (20 C) ±3.0 ±4.6 ppm Supply Voltage (Vdd) V Supply Current (Icc) 3.0 carrier ma 5.5 carrier Control Port ( Applicable for VCTCXO only) Control Voltage Range (Vc) V Center Control Voltage (Vc) +1.5 V To be with-in ±500 ppb of 25 C (at shipping) Frequency Tuning Range ±5.00 ±7.00 <±13.00 ppm (Vc = 1.5V±1.0V) Tuning Slope Positive Linearity ±1 % Port Impedance 100 kω
3 STANDARD SPECIFICATIONS: (Continued) Parameters Minimum Typical Maximum Unites Notes Phase Noise -140 dbc/hz (10MHz carrier C): RMS Jitter BW) ps Carrier Dependent Clipped Sine Wave Output Level 0.8 Vp-p Output Load 10kΩ//10pF LVCMOS Output (Square Wave) V OH 2.4 V Output Load=15pF V OL 0.4 V Output Load=15pF Output Load 15 pf Duty Cycle V OH - V OL)/2 Rise/Fall Time 6 ns Output Load=15pF PART IDENTIFICATION: AST3TQ- - MHz Pull-Ability T = TCXO V = VCTCXO Frequency in MHz Please specify the frequency in MHz e.g MHz Output Type C: LVCMOS SW: Clipped Sine Wave Packaging Blank: Bulk T5: 500pcs/reel T2: 2000pcs/reel
4 TYPICAL FREQUENCY STABILITY VS. TEMPERATURE TYPICAL SHORT TERM STABILITY
5 TYPICAL FREQUENCY PULL VS. CONTROL VOLTAGE TYPICAL PHASE NOISE MHz Carrier
6 TYPICAL AGING: Aging Test Conditions Series Frequency 10MHz Acquisition Mode Cycle Acquisition Time 1129 hours Test Temperature +85 C ± 1 C Number of Samples 5pcs Aging Data No. Projected Aging Time Aging/Day Aging/year (hrs) (ppm) (ppm) # # # # # OUTLINE DIMENSION: Recommended Land Pattern Dimensions: mm Pin Function 1 NC (for TCXO) Vc (for VCTCXO) 2 GND 3 Output 4 Vdd * For factory test only
7 Powered by TCPDF ( Powered by TCPDF ( REFLOW PROFILE: TAPE & REEL: Packaging: T5: 500pcs/reel T2: 2,000pcs/reel MSL-3 packaging applies to MOQ=25 units (cut tape) & T5 and T2. W A0 B0 K0 P F 16.0± ± ± ± ± ±0.1 E D P0 P2 T 1.75± / ± ± ±0.05 Dimensions: mm W A N T E F D 16.5± ± ± ± ± ± /-0.2 ATTENTION: Abracon Corporation s products are COTS Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
Ultra-Low Phase Noise OCXO
APPLICATIONS: COTS Military & Industrial Radios & Timing Circuits Cellular Infrastructure Radar Systems Test & Measurement Equipment GPS Tracking with precision hold-over accuracy WiMax / WLAN Precision
Ultra Low Phase Noise VCXO
FEATURES: High "Q", 3rd Overtone Crystal Technology Ultra Low Phase Noise -162 dbc/hz Typ. @ 10kHz offset, 100MHz carrier Standard LVCMOS RF Output Wide Operating Temperature (-40ºC to +85ºC) standard
Ultra Low Phase Noise XO / VCXO
FEATURES: High "Q", 3rd Overtone Crystal Technology Ultra Low Phase Noise -162 Typ. @ 10k, 100MHz carrier Standard LVCMOS RF Output Wide Operating Temperature (-40ºC to +85ºC) standard ±28 ppm Max. All
TEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR
TEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR ASTX-12, ASVTX-12 FEATURES: 2.5 X 2.0 X 0.9mm APPLICATIONS: Ultra miniature and low height 0.9mm. Low current consumption 2mA. Vc function
Key Electrical Specifications Parameters Minimum Typical Maximum Units Notes ppm
Moisture Sensitivity Level (MSL) 1 FEATURES: Ultra low phase Jitter: 0.2ps max integrated 12 khz to 20 MHz BW ±50ppm total frequency stability over -40 C to +85 C temperature range Output type: LVCMOS,,
Oven Controlled Crystal Oscillators
Moisture Sensitivity Level (MSL) 1 OERIEW: Abracon s AOCJYR series of World s Smallest Profile, Surface Mount- Ovenized Quartz Crystal Oscillators are based on Proprietary MercuryTM ASIC technology, patented
Oven Controlled Crystal Oscillators
Moisture Sensitivity Level (MSL) 1 OVERVIEW: Abracon s AOCJYR series of World s Smallest Profile, Surface Mount- Ovenized Quartz Crystal Oscillators are based on Proprietary MercuryTM ASIC technology,
Oven Controlled Crystal Oscillators
Moisture Sensitivity Level (MSL) 1 OVERVIEW: Abracon s AOCJYR series of World s Smallest Profile, Surface Mount- Ovenized Quartz Crystal Oscillators are based on Proprietary MercuryTM ASIC technology,
Frequency Divider Evaluation Board
OVERALL CAPABILITY ABLNO-EVAL; shown in figure (1) is designed to facilitate engineering evaluation of Abracon s Ultra Low Noise ABLNO series of fixed clock and voltage controlled crystal oscillators.
Pb RoHS. ASG-D Series; LVDS Output STANDARD SPECIFICATIONS: 7.0 x 5.0 x 1.9mm APPLICATIONS: FEATURES:
APPLICATIONS: Networking, SONET/SDH WiMax / WLAN Computing Phase Locked Loo Direct Digital Synthesis (DDS) DSL/ADSL Base Terminal Stations FEATURES: ASG series is a High Performance crystal based oscillator;
SMD TCXO/VCTCXO ASTXR-12 OVERVIEW: ESD Sensitive. Revised: Moisture Sensitivity Level (MSL) 1
ESD Sensitive Moisture Sensitivity Level (MSL) 1 OERIEW: Abracon s ASTXR series of Temperature Compensated Crystal Oscillators are based on an Advanced-Analog Temperature Compensation Integrated Circuit,
PECL, LVDS, CMOS Output Low Jitter SMD Crystal Oscillator
PECL, LDS, CMOS Output Low Jitter SMD Crystal Oscillator 7. x. x 1.mm Moisture Sensitivity Level (MSL) This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES:
PERFORMANCE PLASTIC PACKAGE ULTRA MINIATURE PURE SILICON TM CLOCK OSCILLATORS ASDMP Series
ASDMP Series FEATURES: Ultra Miniature Pure SiliconTM Clock Oscillator High Performance MEMS Technology by Discera Low Power Consumption for high speed communication Exceptional Stability Over Temp. at
ClearClock Ultra-Low Jitter & Power Optimized 5.0 x 3.2 mm XO. (3): Stability over OTR. D: ±15ppm over -20 C to +70 C F: ±20ppm over -40 C to +85 C
Features Ultra-Low Jitter: 125 fs Typ RMS (200fs MAX, F>250MHz); spurs included Available with any frequency from 50MHz to 2100MHz Factory programmable; samples available within 1-2 week lead times Lowest
Oven Controlled Crystal Oscillators
Moisture Sensitivity Level (MSL) 1 OVERVIEW: Abracon s series of World s Smallest Profile, Surface Mount- Ovenized Quartz Crystal Oscillators are based on Proprietary MercuryTM ASIC technology, patented
Frequency Translator / Jitter Attenuator
Moisture Sensitivity Level (MSL) This product is not Moisture Sensitive MSL = N/A: Not Applicable FEATURES: APPLICATIONS: Frequency translation, clock smoothing and jitter attenuation of the input 5x7x2
Ultra-Low Phase Jitter SMD Clock Oscillator
ASMX Moisture Sensitivity Level MSL 3 FEATURES: Excellent integrated phase jitter ±50ppm total frequency stability over -40 C to +85 C temperature range Output Type: LCMOS, LDS, LPECL, HCSL Industry standard
Ultra-miniature, Low Power, kHz MEMS Oscillator
Moisture Sensitivity Level (MSL) 1 ESD Sensitive FEATURES: Smallest 32.768kHz TCXO in the market: 1.54 x 0.84 x 0.6mm Supply oltage: 1.5 to 3.63 Ultra-Low Current Consumption: 1.52µA max.(core current,
Ultra-miniature, Low Power, kHz MEMS Oscillator
ESD Sensitive Moisture Sensitivity Level (MSL) 1 FEATURES: APPLICATIONS: Factory programmable output frequency: 1Hz to 32.768kHz Available in two types of ultra-miniature packages: 2.0 x 1.2 x 0.6mm (SMD);
Ultra-miniature, Low Power, kHz MEMS Oscillator
ESD Sensitive Moisture Sensitivity Level (MSL) 1 FEATURES: APPLICATIONS: Ultra-miniature size: Supply oltage: 1.2 to 3.63 (-10 ~ +70); 1.5 to 3.63 (-40 ~ +85) Ultra-Low Current Consumption: 1.4µA max.
CLEARCLOCK POWER OPTIMIZED 0.12ps 5x7mm XO
FEATURES APPLICATIONS 0.125ps typ jitter (150fs MAX f > 200MHz, 25 C) Highest in-class frequency range from 50 to 2100MHz Excellent spurious suppresion 70mA MAX IDD (, any VDD) Lowest in-class power consumption
Ultra-miniature, Low Power, kHz SMD MEMS Oscillator
ESD Sensitive Moisture Sensitivity Level (MSL) 1 FEAURES: Ultra-miniature size: Supply Voltage: 1.5V to 3.63V Ultra-Low Current Consumption: 1.0µA typ.(no load) Frequency Stabilities include: ±75ppm over
QTCT220 SERIES 2.0 x 2.5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to 52.
5PeNdTbfTaY Q-Tech s surface-mount QTCT220 oscillators consist of an IC 3.3Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from 10.000MHz
PARAMETER SYMBOL CONDITIONS VALUE UNIT
Page 1 of 6 FEATURES APPLICATIONS ±0.28 ppm Holdover Stability Mobile Phones ±4.6 ppm accuracy over all conditions Base Stations including 20 years aging Mobile Radios Miniature 5x7 mm SMD GPS Devices
QTCT570 SERIES 5 x 7mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to MHz Description
Description Q-Tech s surface-mount QTCT570 oscillators consist of an IC 2.8Vdc, 3.3Vdc clock TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range
32.768kHz IoT Optimized SMD Crystal
FEATURES Electrical Specifications Industry s smallest Tuning Fork Crystal (1.20 x 1.00 x 0.35 mm package) Ideally suited for space constraint IoT, Wearables & Wireless applications Simultaneously optimized
Low Power MEMS Jitter Attenuator
Moisture Sensitivity Level: MSL= FEATURES: Low power and miniature package programmable jitter attenuator Input/output frequency up to 200MHz I/O pins can be configured as output enable (OE), frequency
QTCT350 SERIES 3.2 x 5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 5.0Vdc MHz to 52.
Description Q-Tech s surface-mount QTCT350 oscillators consist of an IC 3.3Vdc, 5.0Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from
High Performance MEMS Jitter Attenuator
Moisture Sensitivity Level: MSL=1 FEATURES: APPLICATIONS: Low power and miniature package programmable jitter attenuator 1/10/40/100 Gigabiy Ethernet (GbE) Input frequency up to 200MHz SONET/SDH Output
LOW POWER TCXO & VCTCXO OSCILLATOR
PETERMANN-TECHNIK GmbH LOW POWER TCXO & VCTCXO OSCILLATOR SERIES TCVCTO-2 10.0 40.0 MHz FEATURES + 100% pin-to-pin drop-in replacement to quartz and MEMS based VCTCXO + Ultra Performance Oscillator for
AMJD-SERIES. fout = 27MHz, VDD=1.8V,
FEATURES APPLICATIONS Output selectable between 2 frequencies Compact footprint as small as 1.6x1.2mm Low power consumption 1MHz to 100MHz output frequency range Short lead time for new frequencies Wide
RFID Chip Antenna ACAJ-110- ACAJ-110-T Moisture Sensitivity Level (MSL) MSL = 1. SPECIFICATION Frequency Range. 868/915MHz VSWR
Moisture Sensitivity Level (MSL) MSL = 1 FEATURES: Passive Dielectric Chip Antenna Covering dual ISM bands 868MHz and 915MHz SMA mount, Reflowable to 255 degrees C max. Compact Dimensions (9.0mm x 3.0mm
XCO FAST TURNAROUND CLOCK OSCILLATOR HIGH FREQUENCY, LOW JITTER CLOCK OSCILLATOR FEATURES + DESCRIPTION SELECTOR GUIDE LVCMOS LVDS LVPECL
XCO FAST TURNAROUND DESCRIPTION FEATURES + The XCO clock series is a cutting edge family of low to high frequency, low jitter output, single or multi - frequency clock oscillators. The XCO clocks are available
Oven Controlled Crystal Oscillator OCXO SERIES 8100
FEATURES IEEE 1588 compatible Frequencies up to 100 MHz ELECTRICAL SPECIFICATIONS Frequency Range* fo 5.000 100.000 MHz Supply Voltage Vs Vs ±5% Power Consumption Warm-up Time Frequency Calibration Frequency
Logic & Supply Voltage: HC = HCMOS +5V L = LVHCMOS +3.3V P = LVPECL +3.3V
Description Q-Tech s surface-mount QTCV576 VCXOs consist of an IC 5Vdc,.Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic package with gold plated contact
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 The VS-701 VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
HIGH FREQUENCY, LOW JITTER CLOCK OSCILLATOR
DESCRIPTION FEATURES + The XCO clock series is a cutting edge family of low to high frequency, low jitter output, single or multi - frequency clock oscillators. The XCO clocks are available in 7.0 x 5.0,
IQXT IQXT is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package.
IQXT-205-2 IQXT-205-2 is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package. Model Name IQXT-205-2-18 IQXT-205-2-25 IQXT-205-2-28
MEMS Oscillator, Low Power, LVCMOS, MHz to MHz
Features: MEMS Technology Direct pin to pin drop-in replacement for industry-standard packages LVCMOS Compatible Output Industry-standard package 2.0 x 1.6, 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, and 7.0 x 5.0
Oven Controlled Crystal Oscillator OCXO SERIES IEEE 1100
ELECTRICAL SPECIFICATIONS Min. Typ. Max. Frequency Range* fo 10.000 50.000 MHz Supply Voltage Vs Vs ±5% Power Consumption Warm-up Time Frequency Calibration Frequency Stability vs. Temperature* 3.135 3.3
MX-503 High Precision Microprocessor Controlled Crystal Oscillator
MX-503 High Precision Microprocessor Controlled Crystal Oscillator MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50
2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Nominal frequency range
CFPT9000 -- SMD Temperature Compensated Crystal Oscillator (PLUTO) -- -- A series of surface mountable 7.0x5.0mm Temperature Compensated Voltage Controlled Crystal Oscillators (TCVCXOs) for medium to high
2.0 Absolute Maximum Ratings 1 Parameter Min. Max. Unit. a. Storage temperature C b. Supply voltage (VDD) V
E7157LF 1.0 Specification References a. Rakon part number E7157LF b. 100.0MHz RHT1490A TCVCXO c. Version D (2016-12-12) PROVISIONAL d. Package 14.4 x 9.2 x 4.7 mm max. 2.0 Absolute Maximum Ratings 1 Min.
Crystals Oscillators Filters Precision Timing Magnetics Engineered Solutions
Magnetics Engineered Solutions WWW.ABRACON.COM Introduction Purpose: Objectives: Content: Learning Time: Introduce the ASG series, Fixed Frequency XO & VCXO - Explain the benefits of the ASG series of
Preliminary. 2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Frequency 8 to 1500 MHz 2.2 Operating Temperature Range
RXO5032P SMD Clock Oscillator () High Performance XO in 5 x 3.2 mm Surface Mount package Product description The RXO5032P XO combines very low RMS phase jitter and tight frequency stability in a small
VS-507 Voltage Controlled SAW Oscillator
VS-507 Voltage Controlled SAW Oscillator VS-507 Description The VS-507 VCSO (Voltage Controlled Saw Oscillator from Vectron is an ultra high frequency, ultra low phase noise oscillator. The VS-507 provides
Logic & Supply Voltage: HC = HCMOS +5V L = LVHCMOS +3.3V P = LVPECL +3.3V
. and 5.0Vdc -.000MHz to 56.2MHz Description Q-Tech s surface-mount QTCV56 VCXOs consist of an IC 5Vdc,.Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic
Rakon Product Proposal
RTX5032A -- SMD Temperature Compensated Crystal Oscillator -- -- High performance TCXO offering excellent Phase Noise, Frequency Stability and VCO tilt compensation. -- Product description -- The RTX5032A
VT-802 VT-802. Temperature Compensated Crystal Oscillator. Description
T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,
IQXT IQXT-205-3
IQXT-205-3 IQXT-205-3 is a 2.0 x 1.6mm SMD Temperature Compensated Crystal Oscillator (TCXO) in a hermetically Model Name IQXT-205-3-18 IQXT-205-3-25 IQXT-205-3-28 IQXT-205-3-30 IQXT-205-3-33 A 1.8V version
Performance Specifications
TX-502 Temperature Compensated Crystal Oscillator High Precision TX-502 Features High Precision TCXO OCXO Replacement OCXO Temperature Performance Low power consumption Tight Tolerances Frequency range
CMOS/LVCMOS HF VCXO AE-X32BXX-X Series
CMOS/LVCMOS HF VCXO Description The AE-X32BXX Series of voltage controlled crystal oscillators (VCXO) provides high frequency with CMOS/LVCMOS output. The device does not use any frequency multiplication,
TX-801 Temperature Compensated Crystal Oscillator
TX-801 Temperature Compensated Crystal Oscillator TX-801 Features Applications The TX-801 TCXO provides fully compliant Stratum 3 levels of stability in a 5x3.2mm package. It is ideal for timing over IP
RFPT Specifications. SMD Low Acceleration Sensitivity TCXO / TCVCXO. Product description. Applications
RFPT705 -- SMD Low Acceleration Sensitivity TCXO / TCVCXO. -- -- A series of surface mountable Temperature Compensated Voltage Controlled Crystal Oscillators (TCVCXO) for applications where phase noise
Low Noise Oscillator series LNO 4800 B MHz
Specific request can be addressed to RAKON hirel@rakon.com Product Description LNO 4800 B3 is a low noise oscillator generating an output signal at 4800 MHz. It is composed by an OCSO (Oven Controlled
TX-500 Temperature Compensated Crystal Oscillator
TX-500 Temperature Compensated Crystal Oscillator TX-500 Features Low Phase Noise Low power consumption Output: HCMOS, Clipped Sinewave, PECL, True Sinewave Tight Tolerances Frequency range 1 of 6.4-160
VT-860 Temperature Compensated Crystal Oscillator
VT-860 Temperature Compensated Crystal Oscillator VT-860 Description Vectron s VT-860 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, Clipped sine wave output, analog temperature
Preliminary Rev. M Accusilicon AS318-B Series Professional Audiophile Crystal Oscillator
Accusilicon AS318-B Series Professional Audiophile Crystal Oscillator Features Extremely low close-in phase noise, designed for professional Audiophile & Recording application. Typical -100dBc @ 10Hz at
MX-600 Microprocessor Controlled Crystal Oscillator High Precision
MX-600 Microprocessor Controlled Crystal Oscillator High Precision MX-600 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-40
PL600-27T CLK0 XIN/FIN 1. Xtal Osc CLK1 XOUT CLK2. Low Power 3 Output XO PIN ASSIGNMENT FEATURES DESCRIPTION CLK2 GND VDD FIN CLK0 SOT23-6L
FEATURES 3 LVCMOS outputs with OE tri -state control Low current consumption: o
MINIATURE LOW POWER SMD OSCILLATOR
MINIATURE LOW POWER SMD OSCILLATOR SERIES LPXO FEATURES + High reliability for low cost + Cheapest available SMD-LPXO + Available in 1.8, 2.6, 2.8, 3.0 and 3.3 VDC (1.7-3.5 VDC) + New standard for low
MINIATURE LOW POWER SMD OSCILLATOR
MINIATURE LOW POWER SMD OSCILLATOR SERIES LPXO FEATURES + High reliability for low cost + Cheapest available SMD-LPXO + Available in 1.8, 2.6, 2.8, 3.0 and 3.3 VDC (1.7-3.5 VDC) + New standard for low
VT-841 VT-841. Temperature Compensated Crystal Oscillator. Description. Applications. Features. Block Diagram. Output V DD.
VT-841 Temperature Compensated Crystal Oscillator VT-841 Description Vectron s VT-841 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output, analog temperature
Model: FXTC-HE73 Series Preliminary
HCMOS 7 x 5mm 3.3V TCXO Freq: 0.75 MHz to 250MHz Features EXTREMELY Low Jitter XPRESSO Delivery Frequency Resolution to six decimal places -40 to +85 C operating temperatures Tri-State Enable / Disable
±0.1 ppm ±5 % ±0.1 ppm ±10 % 10 kω // 10 pf
Nominal frequency Fo Frequency stability: vs. temperature reference to (FMAX+FMIN)/2 vs. supply voltage changes reference to frequency at nominal supply vs. load changes reference to frequency at nominal
Solder Dip Options T = Standard S = Sn60Pb40 G=SAC305. Package 86 =Leaded 80 = Formed Leads 85=SMT. VCXO model
Description Q-Tech s 5x7mm LVCMOS Voltage Controlled Crystal Oscillators consist of an IC operating at a supply voltage 3.3Vdc and a miniature strip quartz crystal that operates at the fundamental frequency.
DTCXO Temperature Compensated Real-Time-Clock Module with SPI bus
DTCXO Temperature Compeated Real-Time-Clock Module with SPI bus Moisture Seitivity Level: MSL=1 FEATURES: APPLICATIONS: With state-of-the-art RTC Technology by Micro Crystal AG Wide range in communication
Model 356P/L Advanced PLL LVPECL or LVDS VCXO
Features Ceramic Surface Mount Package Low Phase Jitter Performance, 500fs Typical Advanced PLL Design w/ Low Fundamental Crystal Frequency Range 10MHz 800MHz * +2.5V or +3.3V Operation Output Enable Standard
OX-200 Oven Controlled Crystal Oscillator
OX-200 Oven Controlled Crystal Oscillator OX-200 Features Reflow Process Compatible AT-Cut and SC-Cut Crystal Options Low Profile Compact Package Applications Base Stations Test Equipment Synthesizers
Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator. E/D or NC
CC6 LPECL, LDS Crystal Oscillator Data Sheet CC6 Description ectron s CC6 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off either a 2.5 or 3.3 volt supply, hermetically
MX-503 Microprocessor Controlled Crystal Oscillator High Precision
MX-503 Microprocessor Controlled Crystal Oscillator High Precision MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50
VS-504 Dual Frequency VCSO High Frequency
VS-504 Dual Frequency VCSO High Frequency VS-504 The VS-504 dual frequency VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
Rakon Product Proposal
IT2200A -- SMD Temperature Compensated Crystal Oscillators -- -- Low cost SMD TCXO with voltage control option using an analogue IC for compensation. Frequencies ranging from 10MHz to 52MHz. -- Product
PS-701 SAW Oscillator
PS-701 SAW Oscillator PS-701 The PS-701 SO (Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support high speed data converters and 100G / 400G coherent optical
Package Type: 0 Through Hole Supply Voltage: V V V Logic: HCMOS Sine Wave
Description Q-Tech s High Stability OCXO is a high reliability signal generator that provides an HCMOS or Sine Wave output. The OCXO is available in a Through hole package. A flexible design allows Q-Tech
VCC1 VCC1. CMOS Crystal Oscillator. Description. Features. Applications. Block Diagram. Output V DD GND E/D. Crystal. Oscillator
CC1 CMOS Crystal Oscillator CC1 Description ectron s CC1 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The CC1 uses a fundamental or 3rd overtone crystal resulting
Parameters Symbol Min. Typ. Max. Unit Condition Frequency Range Output Frequency Range f MHz
Features Any frequency between 1 MHz and 110 MHz accurate to 6 decimal places Operating temperature from -40 C to +85 C. Refer to MO2018 for -40 C to +85 C option and MO2020 for -55 C to +125 C option
VX-706 Voltage Controlled Crystal Oscillator
VX-706 Voltage Controlled Crystal Oscillator VX-706 Features AT-Cut Crystal Surface Mount FR4 based package Single layer Reflow Process Compatible Low & Jitter Tight Stabilities Frequency Range 40-300MHz
Crystals Oscillators Real-Time-Clocks Filters Precision Timing Magnetics Engineered Solutions
Real-Time-Clocks Magnetics Engineered Solutions WWW.ABRACON.COM Introduction Purpose: Objectives: Content: Learning Time: Introduce the ABLNO series of Ultra Low Phase Noise, Fixed Frequency & VCXO s and
VC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
PL XIN CLK XOUT VCON. Xtal Osc. Varicap. Low Phase Noise VCXO (17MHz to 36MHz) PIN CONFIGURATION FEATURES DESCRIPTION BLOCK DIAGRAM
FEATURES PIN CONFIGURATION VCXO output for the 17MHz to 36MHz range Low phase noise (-130dBc @ 10kHz offset at 35.328MHz) LVCMOS output with OE tri-state control 17 to 36MHz fundamental crystal input Integrated
Ultra Low Jitter LVPECL or LVDS Clock
Features Ceramic Surface Mount Package Ultra Low Phase Jitter Performance, 100fs Typical Fundamental or 3 rd Overtone Crystal Design Frequency Range 80 170MHz * +2.5V or +3.3V Operation Output Enable Standard
OD100LP-Series Low Phase Noise
OD100LP-Series Low Phase Noise VCOCXO1 Description: The Connor-Winfield OD100LP-series is a low phase noise VCOCXO in a 1x1 inch metal package. The OD100LP-series is designed for those applications that
DTCXO Temperature Compensated Real-Time-Clock Module with SPI bus
DTCXO Temperature Compeated Real-Time-Clock Module with SPI bus Moisture Seitivity Level: MSL=1 FEATURES: APPLICATIONS: With state-of-the-art RTC Technology by Micro Crystal AG Wide range in communication
Features. o HCSL, LVPECL, or LVDS o HCSL/LVPECL, HCSL/LVDS, LVPECL/LVDS. o Ext. Industrial: -40 to 105 C o o. o 30% lower than competing devices
General Description The DSC557-03 is a crystal-less, two output PCI express clock generator meeting Gen1, Gen2, and Gen3 specifications. The clock generator uses proven silicon MEMS technology to provide
IoT OPTIMIZED LOW PROFILE QUARTZ CRYSTAL
FEATURES APPLICATIONS Optimized for energy saving wearables and IoT applications Plated at exceptionally low plating capacitance, as low as 4pF, with optimized ESR.4 mm max height ideally suited for height
IoT OPTIMIZED LOW PROFILE QUARTZ CRYSTAL
FEATURES APPLICATIONS Optimized for energy saving wearables and IoT applications Plated at exceptionally low plating capacitance, as low as 4pF, with optimized ESR.75 mm max height ideally suited for height
IoT OPTIMIZED LOW PROFILE QUARTZ CRYSTAL
FEATURES APPLICATIONS Optimized for energy saving wearables and IoT applications Plated at exceptionally low plating capacitance, as low as 4pF, with optimized ESR.6 mm max height ideally suited for height
T C X O and Logic: TTL / HCMOS V C T C X O Wave Form: Square Wave
T C X O and Logic: TTL / HCMOS V C T C X O Wave Form: Square Wave Product Summary: SQUARE MERCURY Since 1973 TCXO VCTCXO Available Frequency Range Output Wave Form: Square Wave Package size (mm), L x W
PSE Technology Corporation
PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY HOLDER TYPE SPEC. NO. ( P/N ) CUSTOMER P/N ISSUE DATE VERSION 100.000000 MHz TYPE FK 3.2X2.5 SEAM SEALED CRYSTAL CLOCK OSCILLATOR
HMC6380LC4B. WIDEBAND VCOs - SMT. Electrical Specifications, T A. Typical Applications. Features. General Description. Functional Diagram
Typical Applications Low Noise wideband MMIC VCO is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Satcom Military Radar, EW, & ECM Functional Diagram Features Wide Tuning Bandwidth
VVC1 VVC2 Voltage Controlled Crystal Oscillator
VVC1 VVC2 Voltage Controlled Crystal Oscillator Features The VVC1 Voltage Controlled Crystal Oscillator VCXO with a CMOS output Small 5.0 X 7.0 X 1.9 mm package Output frequencies to 66 MHz 5.0 or 3.3
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications Low noise wideband
CARDINAL COMPONENTS, INC. The Cardinal Cappuccino Crystal Oscillator CMOS TCXO 10MHz - 250MHz
SERIES CJTA The Cardinal Cappuccino Crystal Oscillator CMOS TCXO 10MHz - 250MHz Features 3.3V supply voltage- configurable 10MHz to 250MHz CMOS outputsconfigurable Better than 2Hz tuning resolution Low
VT-840 VT-840. Temperature Compensated Crystal Oscillator, Voltage Controlled Temperature Compensated Crystal Oscillator.
VT-840 Temperature Compensated Crystal Oscillator, Voltage Controlled Temperature Compensated Crystal Oscillator VT-840 Description Vectron s VT-840 Temperature Compensated Crystal Oscillator (TCXO) is
Model 149 Stratum 3E, 9x14 mm OCXO
Features 10 to 50 MHz Frequency Range Compliant to Stratum 3E of GR1244CORE Surface Mount 3.3V or 5.0V operation Low Jitter/Phase Noise Tape and Reel Packaging Applications Telecom Switching Wireless Communication
PRELIMINARY. Logic: C = CMOS S = Sine Wave
Description Q-Tech s microcomputer compensated crystal oscillator, MCXO, uses a high stability overtone SC-cut crystal with microprocessor controlled compensation. The self-temperature sensing resonator,
VX-805 Voltage Controlled Crystal Oscillator
VX-805 Voltage Controlled Crystal Oscillator VX-805 Description The VX-805 is a Voltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
VX-701 Voltage Controlled Crystal Oscillator
VX-701 Voltage Controlled Crystal Oscillator VX-701 Features AT-Cut Crystal Surface Mount FR4 based package Reflow Process Compatible Low Tight Stabilities Frequency Range 16-200MHz Standard Frequencies
Model 653 Very Low Jitter LVPECL or LVDS Clock
Features Ceramic Surface Mount Package Very Low Phase Jitter Performance, 500fs Maximum Fundamental or 3 rd Overtone Crystal Design Frequency Range 10 320MHz * +2.5V or +3.3V Operation Output Enable Standard