IQXT IQXT-205-3
|
|
|
- Ashlee Alexander
- 5 years ago
- Views:
Transcription
1 IQXT IQXT is a 2.0 x 1.6mm SMD Temperature Compensated Crystal Oscillator (TCXO) in a hermetically Model Name IQXT IQXT IQXT IQXT IQXT A 1.8V version A 2.5V version A 2.8V version A 3.0V version A 3.3V version IQD Products Ltd Station Road Crewkerne Somerset TA18 8AR United Kingdom Tel: +44 (0) Fax: +44 (0) info@iqdfrequencyproducts.com Registered in England No: VAT Registration No: GB
2 IQXT IQXT is a 2.0 x 1.6mm SMD Temperature Compensated Crystal Oscillator (TCXO) in a hermetically Developed frequencies: , , 19.2, 26.0, 33.6, 38.4 and 52.0MHz Outline (mm) Parameters Tolerance Max Tolerance Condition Stability Ageing 13.0MHz to 52.0MHz 25 C ±2 C ±0.50ppm ±1ppm max per 25 C ±2 C Tolerance: Referred to nominal frequency before reflow soldering. IR Reflow Resistance (@ 25 C ±2 C ref to frequency before reflow): ±1ppm max, 24hrs after reflow Variation (@ ±5% change): ±0.1ppm max Load Variation (@ ±10% change): ±0.1ppm max Electrical Parameters 1.8V ±5% Absolute Maximum Ratings: : -0.6V to 4.6V Operating Temperature Ranges -40 to 105 C Output Details Output Compatibility Clipped Sine Drive Capability 10kΩ//10pF Output: DC coupled Output Level: 0.8V pk-pk min Start Up Time (90% of V pk-pk): 2ms max Start Up Time (within ±0.5ppm): 2ms max Noise Parameters Phase Noise (typ): 1kHz Environmental Parameters Storage Temperature Range: -40 to 105 C Ordering Information *Minimum info required * Model* Output Stability (over operating temperature range)* Operating Temperature Range* Example 26.0MHz IQXT Clipped Sine ±0.5ppm 40 to 105C 1.8V Compliance RoHS Status (2011/65/EU) REACh Status MSL Rating (JDEC-STD-033): Not Applicable
3 IQXT Packaging Details Pack Style: Cutt Pack Size: 100 Pack Style: Reel Pack Size: 2,000 Cut tape Tape & reel in accordance with EIA-481-D Electrical Specification - maximum limiting values 1.8V ±5% Min Max Temperature Range Stability (Min) Current Draw Rise and Fall Time Duty Cycle C ppm ma ns % 13.0MHz MHz -40 to 105 ± MHz MHz -40 to 105 ± MHz 52.0MHz -40 to 105 ±0.5 2 This document was correct at the time of printing; please contact your local sales office for the latest version. Click to view latest version on our website.
4 IQXT IQXT is a 2.0 x 1.6mm SMD Temperature Compensated Crystal Oscillator (TCXO) in a hermetically Developed frequencies: , , 19.2, 26.0, 33.6, 38.4 and 52.0MHz Outline (mm) Parameters Tolerance Max Tolerance Condition Stability Ageing 13.0MHz to 52.0MHz 25 C ±2 C ±0.50ppm ±1ppm max per 25 C ±2 C Tolerance: Referred to nominal frequency before reflow soldering. IR Reflow Resistance (@ 25 C ±2 C ref to frequency before reflow): ±1ppm max, 24hrs after reflow Variation (@ ±5% change): ±0.1ppm max Load Variation (@ ±10% change): ±0.1ppm max Electrical Parameters 2.5V ±5% Absolute Maximum Ratings: : -0.6V to 4.6V Operating Temperature Ranges -40 to 105 C Output Details Output Compatibility Clipped Sine Drive Capability 10kΩ//10pF Output: DC coupled Output Level: 0.8V pk-pk min Start Up Time (90% of V pk-pk): 2ms max Start Up Time (within ±0.5ppm): 2ms max Noise Parameters Phase Noise (typ): 1kHz Environmental Parameters Storage Temperature Range: -40 to 105 C Ordering Information *Minimum info required * Model* Output Stability (over operating temperature range)* Operating Temperature Range* Example 26.0MHz IQXT Clipped Sine ±0.5ppm 40 to 105C 2.5V Compliance RoHS Status (2011/65/EU) REACh Status MSL Rating (JDEC-STD-033): Not Applicable
5 IQXT Packaging Details Pack Style: Cutt Pack Size: 100 Pack Style: Reel Pack Size: 2,000 Cut tape Tape & reel in accordance with EIA-481-D Electrical Specification - maximum limiting values 2.5V ±5% Min Max Temperature Range Stability (Min) Current Draw Rise and Fall Time Duty Cycle C ppm ma ns % 13.0MHz MHz -40 to 105 ± MHz MHz -40 to 105 ± MHz 52.0MHz -40 to 105 ±0.5 2 This document was correct at the time of printing; please contact your local sales office for the latest version. Click to view latest version on our website.
6 IQXT IQXT is a 2.0 x 1.6mm SMD Temperature Compensated Crystal Oscillator (TCXO) in a hermetically Developed frequencies: , , 19.2, 26.0, 33.6, 38.4 and 52.0MHz Outline (mm) Parameters Tolerance Max Tolerance Condition Stability Ageing 13.0MHz to 52.0MHz 25 C ±2 C ±0.50ppm ±1ppm max per 25 C ±2 C Tolerance: Referred to nominal frequency before reflow soldering. IR Reflow Resistance (@ 25 C ±2 C ref to frequency before reflow): ±1ppm max, 24hrs after reflow Variation (@ ±5% change): ±0.1ppm max Load Variation (@ ±10% change): ±0.1ppm max Electrical Parameters 2.8V ±5% Absolute Maximum Ratings: : -0.6V to 4.6V Operating Temperature Ranges -40 to 105 C Output Details Output Compatibility Clipped Sine Drive Capability 10kΩ//10pF Output: DC coupled Output Level: 0.8V pk-pk min Start Up Time (90% of V pk-pk): 2ms max Start Up Time (within ±0.5ppm): 2ms max Noise Parameters Phase Noise (typ): 1kHz Environmental Parameters Storage Temperature Range: -40 to 105 C Ordering Information *Minimum info required * Model* Output Stability (over operating temperature range)* Operating Temperature Range* Example 26.0MHz IQXT Clipped Sine ±0.5ppm 40 to 105C 2.8V Compliance RoHS Status (2011/65/EU) REACh Status MSL Rating (JDEC-STD-033): Not Applicable
7 IQXT Packaging Details Pack Style: Cutt Pack Size: 100 Pack Style: Reel Pack Size: 2,000 Cut tape Tape & reel in accordance with EIA-481-D Electrical Specification - maximum limiting values 2.8V ±5% Min Max Temperature Range Stability (Min) Current Draw Rise and Fall Time Duty Cycle C ppm ma ns % 13.0MHz MHz -40 to 105 ± MHz MHz -40 to 105 ± MHz 52.0MHz -40 to 105 ±0.5 2 This document was correct at the time of printing; please contact your local sales office for the latest version. Click to view latest version on our website.
8 IQXT IQXT is a 2.0 x 1.6mm SMD Temperature Compensated Crystal Oscillator (TCXO) in a hermetically Developed frequencies: , , 19.2, 26.0, 33.6, 38.4 and 52.0MHz Outline (mm) Parameters Tolerance Max Tolerance Condition Stability Ageing 13.0MHz to 52.0MHz 25 C ±2 C ±0.50ppm ±1ppm max per 25 C ±2 C Tolerance: Referred to nominal frequency before reflow soldering. IR Reflow Resistance (@ 25 C ±2 C ref to frequency before reflow): ±1ppm max, 24hrs after reflow Variation (@ ±5% change): ±0.1ppm max Load Variation (@ ±10% change): ±0.1ppm max Electrical Parameters 3.0V ±5% Absolute Maximum Ratings: : -0.6V to 4.6V Operating Temperature Ranges -40 to 105 C Output Details Output Compatibility Clipped Sine Drive Capability 10kΩ//10pF Output: DC coupled Output Level: 0.8V pk-pk min Start Up Time (90% of V pk-pk): 2ms max Start Up Time (within ±0.5ppm): 2ms max Noise Parameters Phase Noise (typ): 1kHz Environmental Parameters Storage Temperature Range: -40 to 105 C Ordering Information *Minimum info required * Model* Output Stability (over operating temperature range)* Operating Temperature Range* Example 26.0MHz IQXT Clipped Sine ±0.5ppm 40 to 105C 3.0V Compliance RoHS Status (2011/65/EU) REACh Status MSL Rating (JDEC-STD-033): Not Applicable
9 IQXT Packaging Details Pack Style: Cutt Pack Size: 100 Pack Style: Reel Pack Size: 2,000 Cut tape Tape & reel in accordance with EIA-481-D Electrical Specification - maximum limiting values 3.0V ±5% Min Max Temperature Range Stability (Min) Current Draw Rise and Fall Time Duty Cycle C ppm ma ns % 13.0MHz MHz -40 to 105 ± MHz MHz -40 to 105 ± MHz 52.0MHz -40 to 105 ±0.5 2 This document was correct at the time of printing; please contact your local sales office for the latest version. Click to view latest version on our website.
10 IQXT IQXT is a 2.0 x 1.6mm SMD Temperature Compensated Crystal Oscillator (TCXO) in a hermetically Developed frequencies: , , 19.2, 26.0, 33.6, 38.4 and 52.0MHz Outline (mm) Parameters Tolerance Max Tolerance Condition Stability Ageing 13.0MHz to 52.0MHz 25 C ±2 C ±0.50ppm ±1ppm max per 25 C ±2 C Tolerance: Referred to nominal frequency before reflow soldering. IR Reflow Resistance (@ 25 C ±2 C ref to frequency before reflow): ±1ppm max, 24hrs after reflow Variation (@ ±5% change): ±0.1ppm max Load Variation (@ ±10% change): ±0.1ppm max Electrical Parameters 3.3V ±5% Absolute Maximum Ratings: : -0.6V to 4.6V Operating Temperature Ranges -40 to 105 C Output Details Output Compatibility Clipped Sine Drive Capability 10kΩ//10pF Output: DC coupled Output Level: 0.8V pk-pk min Start Up Time (90% of V pk-pk): 2ms max Start Up Time (within ±0.5ppm): 2ms max Noise Parameters Phase Noise (typ): 1kHz Environmental Parameters Storage Temperature Range: -40 to 105 C Ordering Information *Minimum info required * Model* Output Stability (over operating temperature range)* Operating Temperature Range* Example 26.0MHz IQXT Clipped Sine ±0.5ppm 40 to 105C 3.3V Compliance RoHS Status (2011/65/EU) REACh Status MSL Rating (JDEC-STD-033): Not Applicable
11 IQXT Packaging Details Pack Style: Cutt Pack Size: 100 Pack Style: Reel Pack Size: 2,000 Cut tape Tape & reel in accordance with EIA-481-D Electrical Specification - maximum limiting values 3.3V ±5% Min Max Temperature Range Stability (Min) Current Draw Rise and Fall Time Duty Cycle C ppm ma ns % 13.0MHz MHz -40 to 105 ± MHz MHz -40 to 105 ± MHz 52.0MHz -40 to 105 ±0.5 2 This document was correct at the time of printing; please contact your local sales office for the latest version. Click to view latest version on our website. Sales Office Contact Details: UK: +44 (0) Germany: France: USA: info@iqdfrequencyproducts.com Web: Printed on 20 Mar 18 12:57 using Model Data Sheet V Page 11 of 11
IQXT IQXT is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package.
IQXT-205-2 IQXT-205-2 is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package. Model Name IQXT-205-2-18 IQXT-205-2-25 IQXT-205-2-28
CXOLAT CXOLAT 1.8V CXOLAT 2.5V CXOLAT 3.0V CXOLAT 3.3V
CXOLAT he CXOLAT 32.768kHz surface-mount oscillator achieves the low power comparable with a tuning fork design and the fast start-up and tight frequency stability attained by an AT cut crystal design.
CXOQ CXOQ 1.8V CXOQ 2.5V CXOQ 3.0V CXOQ 3.3V
CXOQ Statek s ultra miniature and ultra low profile CXOQ oscillators consist of a CMOS/TTL compatible hybrid circuit and a state-ofthe-art, miniature, fundamental-mode crystal. Model Name Description CXOQ
VT-802 VT-802. Temperature Compensated Crystal Oscillator. Description
T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,
VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4
VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4 VT-800 Description Vectron s VT-800 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine
VT-841 VT-841. Temperature Compensated Crystal Oscillator. Description. Applications. Features. Block Diagram. Output V DD.
VT-841 Temperature Compensated Crystal Oscillator VT-841 Description Vectron s VT-841 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output, analog temperature
VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator
VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator Features Clipped Sine Wave Output Output Frequencies to 27 MHz Fundamental Crystal Design Optional VCXO Function available Gold
VT-701 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC2
T-701 Temperature Compensated Crystal Oscillator Previous ectron Model TC2 T-701 Description ectron s T-701 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output,
VT-501 Temperature Compensated Crystal Oscillator Previous Vectron Model VTD3
T-501 Temperature Compensated Crystal Oscillator Previous ectron Model TD3 T-501 Description ectron s T-501 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog
VT-860 Temperature Compensated Crystal Oscillator
VT-860 Temperature Compensated Crystal Oscillator VT-860 Description Vectron s VT-860 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, Clipped sine wave output, analog temperature
TEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR
TEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR ASTX-12, ASVTX-12 FEATURES: 2.5 X 2.0 X 0.9mm APPLICATIONS: Ultra miniature and low height 0.9mm. Low current consumption 2mA. Vc function
TX-801 Temperature Compensated Crystal Oscillator
TX-801 Temperature Compensated Crystal Oscillator TX-801 Features Applications The TX-801 TCXO provides fully compliant Stratum 3 levels of stability in a 5x3.2mm package. It is ideal for timing over IP
TX-705 Temperature Compensated Crystal Oscillator
TX-705 Temperature Compensated Crystal Oscillator TX-705 Features Applications The TX-705 is a TCXO family designed for applications where superior g-sensitivity and good phase noise together with small
VT-840 VT-840. Temperature Compensated Crystal Oscillator, Voltage Controlled Temperature Compensated Crystal Oscillator.
VT-840 Temperature Compensated Crystal Oscillator, Voltage Controlled Temperature Compensated Crystal Oscillator VT-840 Description Vectron s VT-840 Temperature Compensated Crystal Oscillator (TCXO) is
VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator
VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator Features CMOS Square Wave Output Enable Disable Feature Output Frequencies to 30 MHz Fundamental Crystal Design Optional VCXO function
Rakon Product Proposal
RTX5032A -- SMD Temperature Compensated Crystal Oscillator -- -- High performance TCXO offering excellent Phase Noise, Frequency Stability and VCO tilt compensation. -- Product description -- The RTX5032A
Product Specifications Approval Sheet
TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com
VX-703 Data Sheet VX-703. Voltage Controlled Crystal Oscillator Previous Vectron Model V-Type. Description. Features. Applications.
X-703 Data Sheet oltage Controlled Crystal Oscillator Previous ectron Model -Type X-703 Description ectron s X-703 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator
RFPT Specifications. SMD Low Acceleration Sensitivity TCXO / TCVCXO. Product description. Applications
RFPT705 -- SMD Low Acceleration Sensitivity TCXO / TCVCXO. -- -- A series of surface mountable Temperature Compensated Voltage Controlled Crystal Oscillators (TCVCXO) for applications where phase noise
This bulletin is to notify all customers of the termination of the following Ecliptek series effective March 1 st, 2002:
Marketing Bulletin DATE: March 6, 2003 TO: FROM: RE: Affected Customers Mark Stoner Product Termination To all concerned parties, This bulletin is to notify all customers of the termination of the following
2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Nominal frequency range
CFPT9000 -- SMD Temperature Compensated Crystal Oscillator (PLUTO) -- -- A series of surface mountable 7.0x5.0mm Temperature Compensated Voltage Controlled Crystal Oscillators (TCVCXOs) for medium to high
VX-805 Voltage Controlled Crystal Oscillator
VX-805 Voltage Controlled Crystal Oscillator VX-805 Description The VX-805 is a Voltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
VCC M CMOS Crystal Oscillator
CC1-1545-49M1520000 CMOS Crystal Oscillator CC1 Description ectron s CC1 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The CC1 uses a fundamental or 3rd overtone
VC-820 CMOS Crystal Oscillator
C-20 CMOS Crystal Oscillator C-20 ectron s C-20 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The C-20 uses a fundamental or a 3rd overtone crystal, oscillating
CMOS/LVCMOS HF VCXO AE-X32BXX-X Series
CMOS/LVCMOS HF VCXO Description The AE-X32BXX Series of voltage controlled crystal oscillators (VCXO) provides high frequency with CMOS/LVCMOS output. The device does not use any frequency multiplication,
Performance Specifications
TX-502 Temperature Compensated Crystal Oscillator High Precision TX-502 Features High Precision TCXO OCXO Replacement OCXO Temperature Performance Low power consumption Tight Tolerances Frequency range
TX-500 Temperature Compensated Crystal Oscillator
TX-500 Temperature Compensated Crystal Oscillator TX-500 Features Low Phase Noise Low power consumption Output: HCMOS, Clipped Sinewave, PECL, True Sinewave Tight Tolerances Frequency range 1 of 6.4-160
VCC1 VCC1. CMOS Crystal Oscillator. Description. Features. Applications. Block Diagram. Output V DD GND E/D. Crystal. Oscillator
CC1 CMOS Crystal Oscillator CC1 Description ectron s CC1 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The CC1 uses a fundamental or 3rd overtone crystal resulting
VV-701 Voltage Controlled Crystal Oscillator Previous Vectron Model VVC1/VVC2
-701 oltage Controlled Crystal Oscillator Previous ectron Model C1/C2-701 Description ectron s -701 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator with a CMOS output.
VX-705 Voltage Controlled Crystal Oscillator
X-705 oltage Controlled Crystal Oscillator X-705 Description The X-705 is a oltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
QTCT570 SERIES 5 x 7mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to MHz Description
Description Q-Tech s surface-mount QTCT570 oscillators consist of an IC 2.8Vdc, 3.3Vdc clock TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range
PLETRONICS NCF4 Series
NCF4 2.0 x 2.5 x 1.0 mm LCC Ceramic Package Electrical Characteristics Features Pletronics NCF4 Series Temperature Compensated Crystal Oscillator Optional Voltage Control Function Clipped Sine Wave Output
VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator
VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator Features CMOS output Output frequencies to 168 MHz Tri-state output for board test and debug -10/70 or 40/85 C operating temperature Gold over nickel
QTCT350 SERIES 3.2 x 5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 5.0Vdc MHz to 52.
Description Q-Tech s surface-mount QTCT350 oscillators consist of an IC 3.3Vdc, 5.0Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from
Performance Specifications. Frequency Stabilities 1 ( MHz) -20 to +70 C -40 to +85 C -40 to +95 C Residual error compare to fit curve
MD-403 I2C InterfaceOven Controlled Crystal Oscillator MD-403 The MD-403 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates with an onboard
MX-600 Microprocessor Controlled Crystal Oscillator High Precision
MX-600 Microprocessor Controlled Crystal Oscillator High Precision MX-600 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-40
Model 356P/L Advanced PLL LVPECL or LVDS VCXO
Features Ceramic Surface Mount Package Low Phase Jitter Performance, 500fs Typical Advanced PLL Design w/ Low Fundamental Crystal Frequency Range 10MHz 800MHz * +2.5V or +3.3V Operation Output Enable Standard
MX-503 High Precision Microprocessor Controlled Crystal Oscillator
MX-503 High Precision Microprocessor Controlled Crystal Oscillator MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50
Description. Block Diagrams. Figure 1b. Crystal-Based Multiplier w/saw
C-501 oltage Controlled Crystal Oscillator C-501 Description The C-501 is a voltage controlled crystal oscillator that is housed in a hermetic 14.0 x 9.0 x 4.5mm ceramic package. Depending upon the frequency
MX-503 Microprocessor Controlled Crystal Oscillator High Precision
MX-503 Microprocessor Controlled Crystal Oscillator High Precision MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50
2.0 Absolute Maximum Ratings 1 Parameter Min. Max. Unit.
RFPO45 G.8263 1.0 Specification References a. Rakon part number (Doc ID) M6635LF (514241) b. 25.0MHz MERC 9x7 HOT CMOS 3.3V c. Version 1 (2014-04-01) d. Package 9.7 x 7.5 x 4.3 mm max. 2.0 Absolute Maximum
PLETRONICS TCD3 Series
TCD3 3.2 x 5.0 x 1.50 mm LCC Ceramic Package Features Pletronics TCD3 Stratum-III Type Series Temperature Compensated Crystal Oscillator Optional Voltage Control Function Low Power / Fast Warm Up Clipped
VVC4 Voltage Controlled Crystal Oscillator
C4 oltage Controlled Crystal Oscillator Features ectron s Smallest CXO, 5.0 X 3.2 X 1.2 mm High Frequencies to 77.70 MHz 5.0 or 3.3 operation Linearity 10% Tri-State Output for testing Low jitter < 1ps
Rakon Product Proposal
RS1490P XO `Tiger' SMD Clock Oscillator Series High Performance PLL Crystal Clock Oscillator. Product description This PLL XO offers ultra low RMS phase jitter and high frequency stability in an industry
VC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
VC-711 Differential (LVPECL, LVDS) Crystal Oscillator
C-7 Differential (LPECL, LDS) Crystal Oscillator C-7 Description ectron s C-7 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off either a 2.5 or 3.3 volt power supply
OX-400 / OX 401 Oven Controlled Crystal Oscillator
OX-400 / OX 401 Oven Controlled Crystal Oscillator OX-400 / 401 Features 4-Pin Dip Fast warm-up TCXO replacement for better short term stability Frequency Range, 10 MHz to 40 MHz Standard frequencies,
TX-700 Temperature Compensated Crystal Oscillator
TX-700 Temperature Compensated Crystal Oscillator Features EFC Standard Small Size 0% RoHS Compliant Low Profile range of 6.4-52 MHz Standard Frequencies:, 12.8, 16.384, 19.44, 20, 20.48 MHz Applications
PLETRONICS TCD4 FEMTOCELL Series
TCD4 Femto 3.2 x 5.0 x 1.50 mm LCC Ceramic Package Features Pletronics TCD4 Femtocell Series Temperature Compensated Crystal Oscillator Optional Voltage Control Function Low Power / Fast Warm Up Clipped
TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator
TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator TX-707 The TX-707 Series TCXO combines innovative manufacturing and the latest technology to provide low phase noise and excellent g-sensitivity.
MINIATURE LOW POWER SMD OSCILLATOR
MINIATURE LOW POWER SMD OSCILLATOR SERIES LPXO FEATURES + High reliability for low cost + Cheapest available SMD-LPXO + Available in 1.8, 2.6, 2.8, 3.0 and 3.3 VDC (1.7-3.5 VDC) + New standard for low
Model 149 Stratum 3E, 9x14 mm OCXO
Features 10 to 50 MHz Frequency Range Compliant to Stratum 3E of GR1244CORE Surface Mount 3.3V or 5.0V operation Low Jitter/Phase Noise Tape and Reel Packaging Applications Telecom Switching Wireless Communication
VC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
Rakon Product Proposal
IT2200A -- SMD Temperature Compensated Crystal Oscillators -- -- Low cost SMD TCXO with voltage control option using an analogue IC for compensation. Frequencies ranging from 10MHz to 52MHz. -- Product
PLETRONICS THA3 Series
THA3 5.0 x 7.0 x 2.6 mm LCC Ceramic Package Features Pletronics THA3 Stratum-III Type Series Temperature Compensated Crystal Oscillator Optional Voltage Control Function Low Power / Fast Warm Up CMOS Output
S1903 and S1950 Series
Actual Size = 5 x 7mm Product Features 3.3V or 5V ACMOS/TTL compatible logic levels Very tight frequency stability available Fast clock edge rate Pin-compatible with standard 5x7mm packages Designed for
Preliminary. 2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Frequency 8 to 1500 MHz 2.2 Operating Temperature Range
RXO5032P SMD Clock Oscillator () High Performance XO in 5 x 3.2 mm Surface Mount package Product description The RXO5032P XO combines very low RMS phase jitter and tight frequency stability in a small
VC-801 CMOS Crystal Oscillator Previous Vectron Model VCC4
C-01 CMOS Crystal Oscillator Previous ectron Model CC4 C-01 ectron s C-01 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The C-01 uses fundamental or 3rd overtone
Low Power (na Current Consumption) KHz ME831, ME832, ME833, ME834 Series
Features: ME83x is a 32.768 KHz CMOS output TCXO with a maximum frequency stability of ± 5 ppm (± 2.62 minutes / year) over -0 to +85 C, much better time-keeping accuracy than the competition. A proprietary
PARAMETER SYMBOL CONDITIONS VALUE UNIT
Page 1 of 6 FEATURES APPLICATIONS ±0.28 ppm Holdover Stability Mobile Phones ±4.6 ppm accuracy over all conditions Base Stations including 20 years aging Mobile Radios Miniature 5x7 mm SMD GPS Devices
PSE Technology Corporation
PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY 24.000000 MHz PRODUCT TYPE TYPE FJ 2.5x2.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR SPEC. NO. ( P/N ) FJ2400002 CUSTOMER P/N
VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator
VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator Features 2.5 or 3.3 V LVDS 3rd Overtone Crystal for best jitter performance Output frequencies to 270 MHz Low Jitter < 1 ps rms, 12kHz to 20MHz Enable/Disable output
VS-708 Single Frequency VCSO
VS-708 Single Frequency VCSO VS-708 Description The VS-708 is a Voltage Controlled SAW Oscillator that operates at the fundamental or a fraction of the internal SAW filter frequency. The SAW component
PSE Technology Corporation
PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY 25.000000 MHz PRODUCT TYPE SPEC. NO. ( P/N ) TYPE FJ 2.5x2.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR CUSTOMER P/N ISSUE DATE
PS-701 SAW Oscillator
PS-701 SAW Oscillator PS-701 The PS-701 SO (Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support high speed data converters and 100G / 400G coherent optical
Typical Applications Base Stations Test Equipment Synthesizers. Frequency stabilities 1 [Standard]
![Typical Applications Base Stations Test Equipment Synthesizers. Frequency stabilities 1 [Standard]](/thumbs/96/128719484.jpg "Typical Applications Base Stations Test Equipment Synthesizers. Frequency stabilities 1 [Standard]")
PX-701 Clock Oscillator Features Reflow Process Compatible Surface Mount Package AT-Cut Crystal SONET Minimum Clock Specification Low Phase Noise Tight Tolerances Typical Applications Base Stations Test
PSE Technology Corporation
PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY 156.250000 MHz PRODUCT TYPE SPEC. NO. ( P/N ) CUSTOMER P/N ISSUE DATE VERSION TYPE UX 5.0x3.2 SEAM SEALED CRYSTAL CLOCK
VVC1 VVC2 Voltage Controlled Crystal Oscillator
VVC1 VVC2 Voltage Controlled Crystal Oscillator Features The VVC1 Voltage Controlled Crystal Oscillator VCXO with a CMOS output Small 5.0 X 7.0 X 1.9 mm package Output frequencies to 66 MHz 5.0 or 3.3
VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1., 2.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 125 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
MINIATURE LOW POWER SMD OSCILLATOR
MINIATURE LOW POWER SMD OSCILLATOR SERIES LPXO FEATURES + High reliability for low cost + Cheapest available SMD-LPXO + Available in 1.8, 2.6, 2.8, 3.0 and 3.3 VDC (1.7-3.5 VDC) + New standard for low
Model 653 Very Low Jitter LVPECL or LVDS Clock
Features Ceramic Surface Mount Package Very Low Phase Jitter Performance, 500fs Maximum Fundamental or 3 rd Overtone Crystal Design Frequency Range 10 320MHz * +2.5V or +3.3V Operation Output Enable Standard
VS-800 Ultra-Low Jitter High Frequency VCSO
VS-800 Ultra-Low Jitter High Frequency VCSO VS-800 Description The VS-800 is a Voltage Controlled SAW Oscillator that operates at the fundamental frequency of the internal SAW resonator. The SAW resonator
Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator. E/D or NC
CC6 LPECL, LDS Crystal Oscillator Data Sheet CC6 Description ectron s CC6 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off either a 2.5 or 3.3 volt supply, hermetically
MHz. Performance Specifications
VX-501-0276-245M76 Preliminary version: Subject to technical modification. VCXO VX-501-0276-245M76 Nominal frequency (f0) 245.76 MHz Performance Specifications Frequency stabilities vs. operating temp.
Excellent Integrated System Limited
Excellent Integrated System Limited Stocking Distributor Click to view price, real time Inventory, Delivery & Lifecycle Information: Abracon Corporation AST3TQ-T-10.000MHZ-50-C For any questions, you can
PSE Technology Corporation
PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY HOLDER TYPE SPEC. NO. ( P/N ) CUSTOMER P/N ISSUE DATE VERSION 25.000000 MHz TYPE FK 3.2x2.5 SEAM SEALED CRYSTAL CLOCK OSCILLATOR
Performance Specifications. Frequency Stabilities 1 ( 10 & 20 MHz)
MD-223 I 2 C Interface Oven Controlled Crystal Oscillator Preleminary version MD-223 The MD-223 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates
Model 633 Very Low Jitter LVPECL or LVDS Clock
Features Ceramic Surface Mount Package Very Low Phase Jitter Performance, 500fs Maximum Fundamental or 3 rd Overtone Crystal Design Frequency Range 10 220MHz * +2.5V or +3.3V Operation Output Enable Standard
Performance Specifications
OX-280 Oven Controlled Crystal Oscillator OX-280 Features Surface Mount Package AT-CUT and SC_CUT Crystal Options Low Profile Compact Package Compact Package Applications Base stations Test equipment Synthesizers
MD-403 I2C InterfaceOven Controlled Crystal Oscillator
MD-43 I2C InterfaceOven Controlled Crystal Oscillator MD-43 The MD-43 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates with an onboard
2.0 Absolute Maximum Ratings 1 Parameter Min. Max. Unit. a. Storage temperature C b. Supply voltage (VDD) V
E7157LF 1.0 Specification References a. Rakon part number E7157LF b. 100.0MHz RHT1490A TCVCXO c. Version D (2016-12-12) PROVISIONAL d. Package 14.4 x 9.2 x 4.7 mm max. 2.0 Absolute Maximum Ratings 1 Min.
VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1.,.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 15 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
A DROP-IN REPLACEMENT SOLUTION FOR YOUR EMI / EMC COMPLIANCE PROBLEM
3HM57 Group R A DROP-IN REPLACEMENT SOLUTION FOR YOUR EMI / EMC COMPLIANCE PROBLEM The principle sources of the EMI problem come from the system clocks. Therefore, rather than patch the problem with ferrite
Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator E/D
X-700 oltage Controlled Crystal Oscillator Previous ectron Model C-710 X-700 The X-700 is a oltage Controlled Crystal Oscillator that operates at the fundamental frequency of the internal HFF crystal.
Ultra Low Jitter LVPECL or LVDS Clock
Features Ceramic Surface Mount Package Ultra Low Phase Jitter Performance, 100fs Typical Fundamental or 3 rd Overtone Crystal Design Frequency Range 80 170MHz * +2.5V or +3.3V Operation Output Enable Standard
RFPT Specifications. The CHARON is a SPI controlled high accuracy TCXO with embedded timer and alarm function. Product description
RFPT200 -- The CHARON is a SPI controlled high accuracy TCXO with embedded timer and alarm function. -- -- The Charon is a high stability 7x5 SMD Digitally Controlled Temperature Controlled Crystal Oscillator
±0.1 ppm ±5 % ±0.1 ppm ±10 % 10 kω // 10 pf
Nominal frequency Fo Frequency stability: vs. temperature reference to (FMAX+FMIN)/2 vs. supply voltage changes reference to frequency at nominal supply vs. load changes reference to frequency at nominal
QTCT220 SERIES 2.0 x 2.5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to 52.
5PeNdTbfTaY Q-Tech s surface-mount QTCT220 oscillators consist of an IC 3.3Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from 10.000MHz
VC-708 VC-708. LVPECL, LVDS Crystal Oscillator Data Sheet Ultra Low Phase Noise. Description
C-708 LPECL, LDS Crystal Oscillator Data Sheet Ultra Low Phase Noise C-708 Description ectron s C-708 Crystal Oscillator is a quartz stabilized, low phase noise, differential output oscillator which is
Oven Controlled Crystal Oscillators
Moisture Sensitivity Level (MSL) 1 OVERVIEW: Abracon s AOCJYR series of World s Smallest Profile, Surface Mount- Ovenized Quartz Crystal Oscillators are based on Proprietary MercuryTM ASIC technology,
PSE Technology Corporation
PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY HOLDER TYPE SPEC. NO. ( P/N ) CUSTOMER P/N ISSUE DATE VERSION 100.000000 MHz TYPE FK 3.2X2.5 SEAM SEALED CRYSTAL CLOCK OSCILLATOR
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 The VS-701 VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
VCC6-Q/R Series 2.5 and 3.3 volt LVPECL Crystal Oscillator
CC6-Q/R Series 2.5 and 3.3 volt LPECL Crystal Oscillator Features 2.5 or 3.3 LPECL 3 rd Overtone Crystal for best jitter performance Output frequencies to 270 MHz 0.2pS rms jitter, 12kHz-20MHz,155.52MHz
Performance Specifications
OX-208 Oven Controlled Crystal Oscillator OX-208 OX-208 The OX-208 is a high stability ovenized crystal oscillator in a 25 x 25 mm package, capable of aging rates of 0.15 /day and temperature stabilities
PSE Technology Corporation
PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY 32.768000 KHz PRODUCT TYPE SPEC. NO. ( P/N ) TYPE KJ 2.5x2.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR CUSTOMER P/N ISSUE DATE
MEMS Oscillator, Low Power, LVCMOS, MHz to MHz
Features: MEMS Technology Direct pin to pin drop-in replacement for industry-standard packages LVCMOS Compatible Output Industry-standard package 2.0 x 1.6, 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, and 7.0 x 5.0
Oven Controlled Crystal Oscillators
Moisture Sensitivity Level (MSL) 1 OVERVIEW: Abracon s AOCJYR series of World s Smallest Profile, Surface Mount- Ovenized Quartz Crystal Oscillators are based on Proprietary MercuryTM ASIC technology,
V-Type Voltage Controlled Crystal Oscillator (VCXO)
Product Data Sheet V-Type Voltage Controlled Crystal Oscillator (VCXO) Features Output Frequencies to 77.760 MHz 5.0 or 3.3 volt operation Tri-State Output Jitter Performance 12MHz) VCXO
PSE Technology Corporation
PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY PRODUCT TYPE SPEC. NO. ( P/N ) CUSTOMER P/N ISSUE DATE VERSION 48.000000 MHz TYPE FN 7.0x5.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR
PSE Technology Corporation
PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY HOLDER TYPE SPEC. NO. ( P/N ) CUSTOMER P/N ISSUE DATE VERSION 156.250000 MHz TYPE UX 3.2x2.5 SEAM SEALED CRYSTAL CLOCK OSCILLATOR