PLETRONICS NCF4 Series
|
|
|
- Juliana Gilbert
- 6 years ago
- Views:
Transcription
1 NCF4 2.0 x 2.5 x 1.0 mm LCC Ceramic Package Electrical Characteristics Features Pletronics NCF4 Series Temperature Compensated Crystal Oscillator Optional Voltage Control Function Clipped Sine Wave Output 1.8V to 3.3V nominal Supply Voltage MHz Frequency Applications GPS WiMAX, Wi-Fi, Wi-LAN Handsets Broadband Access Point to point radios Seismic Exploration Wireless Communications Base Stations Test Equipment Parameter Min Typ Max Unit Condition (Consult factory for other options) Frequency Range MHz Specified by part number Frequency Stability vs. Temperature 2 ±0.5 - ±2.5 ppm Specified by part number (f - f min ) / 2 Frequency Initial Calibration - - ±2.0 ppm Vcontrol 1.50 volts at 25 C ± 2 C when V CC > 2.5 volts Vcontrol 0.9 volts at 25 C ± 2 C when V CC < 2.4 volts If Vcontrol used Operating Temperature Range C Specified by part number, Consult factory for wider range Supply Voltage 1, 2 V CC Volts ± 5%, Specified by part number Supply Current I CC ma Load: 10 Kohm 10 pf, V CC ± 5% Frequency Stability vs. Supply - - ±0.2 ppm Load: 10 Kohm 10 pf, V CC ± 5% Frequency Stability vs. Load - - ±0.2 ppm Load: 10 Kohm 10 pf ± 5% Vcontrol Range Volts 1.50 volts nominal for V CC nominal > 2.5 volts 0.9 volts nominal for V CC nominal < 2.4 volts Frequency Pullability 2 0 ±8.0 ±12.0 ppm Specified by part number, Positive Slope Output Waveform Clipped Sine Wave DC Coupled Output Level V p-p Load: 10 Kohm 10 pf ± 10% Startup Time ms Within ± 2.0 ppm of final frequency Long Term Stability (Aging) - - ±1.0 ppm Per year at 25 C ± 2 C Phase Noise 100 Hz 1 khz 10 khz 100 khz Storage Temperature Range C - dbc/hz 25 C ± 2 C at 26.0 MHz Notes: 1 Place an appropriate power supply bypass capacitor next to device for correct operation 2 Specified by part number Copyright 2015, Pletronics Inc th Ave. W, Lynnwood, WA USA Pg 1
2 Part Number Series Model V CC Supply Voltage 1 Operating Temperature Stability 1, 2 Pullability 1 Frequency Lowest Highest Lowest Highest (ppm) (ppm) (MHz) NCF C G M 031 = 3.1 for 3.3 volts nominal 029 = 2.9 for 3.0 volts nominal 027 = 2.7 for 2.8 volts nominal 024 = 2.4 for 2.5 volts nominal 017 = 1.7 for 1.8 volts nominal 035 = 3.5 for 3.3 volts nominal 031 = 3.1 for 3.0 volts nominal 029 = 2.9 for 2.8 volts nominal 026 = 2.6 for 2.5 volts nominal 019 = 1.9 for 1.8 volts nominal A = +10 o C B = +5 o C C = +0 o C D = -5 o C E = -10 o C F = -15 o C G = -20 o C H = -25 o C J = -30 o C K = -35 o C L = -40 o C A = +40 o C B = +45 o C C = +50 o C D = +55 o C E = +60 o C F = +65 o C G = +70 o C H = +75 o C J = +80 o C K = +85 o C 005 = ± = ± = ± = ± = ± Contact Factory for non-standard specifications 2 Not all stabilities are available with all operating temperature ranges. Contact Factory for exact combinations available. 000 = TCXO 005 = ± = ± MHz Device Marking Pff.f YMxxx P ff/f YM = Pletronics = Frequency in MHz = Date Code (Year Month) See below for YM codes All other markings are internal codes Note: Specifications such as frequency stability, supply voltage and operating temperature range, etc. are not identified from marking. External packaging labels and packing list will correctly identify the ordered Pletronics part number. Code Code A B C D E F G H J K L M Year Month JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC Package Labeling Tape and Reel available for quantities of 250 to 1000 per reel, cut tape for < mm tape, 4mm pitch. P/N Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Courier New Bar code is 39-Full ASCII RoHs Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Arial Pletronics Inc. certifies this device is in accordance with the RoHS 2 (2011/65/EU) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB s, PBDE s Weight of the Device: 0.02 grams Moisture Sensitivity Level: 1 As defined in J-STD-020D Second Level Interconnect code: e4 Copyright 2015, Pletronics Inc th Ave. W, Lynnwood, WA USA Pg 2
3 Mechanical Dimensions Inches mm A ± ± 0.20 B ± ± 0.20 C ± ± 0.10 D E F G H Typical dimensions (Not to Scale) Contacts (pads): Gold 11.8 to 39.4 µinches (0.3 to 1.0 µm) over Nickel 50 to 350 µinches (1.27 to 8.89 µm) Pad Function Note 1 Vcontrol Input If this function is not specified, recommend connecting this pad to ground. 2 NC No external connection allowed 3 Ground (GND) 4 Output The output is DC coupled. Most commonly used with external coupling capacitor to 0.01µF recommended. 5 NC No external connection allowed 6 V CC Supply Voltage Connect an appropriate power supply bypass capacitor as close as possible For Optimum Jitter Performance, Pletronics recommends: $ A ground plane under the device $ Do not route large transient signals (both current and voltage) under the device $ Do not place near a large magnetic field such as a high frequency switching power supply $ Do not place near piezoelectric buzzers or mechanical fans Copyright 2015, Pletronics Inc th Ave. W, Lynnwood, WA USA Pg 3
4 Electrical Test / Load Circuit Environmental / ESD Ratings Reliability: Environmental Compliance ESD Rating Parameter Mechanical Shock Vibration Solderability Thermal Shock Condition JESD22-B104 JESD22-B103 IPC J-STD-002 MIL-STD-883 Method 1011, Condition A Model Min. Voltage Condition Human Body Model 2000V JESD22-A114 Charged Device Model 500V JESD 22-C101 Machine Model 200V JESD22-A115 Absolute Maximum Ratings Thermal Characteristics: The imum die or junction temperature is 155 o C The thermal resistance junction to board is 30 to 50 o C/Watt depending on the solder pads, ground plane and construction of the PCB. Parameter Unit V CC Supply Voltage -0.6V to +4.6V Vi Input Voltage -0.6V to V CC + 0.6V Io Output Current -10mA to +10mA Copyright 2015, Pletronics Inc th Ave. W, Lynnwood, WA USA Pg 4
5 Reflow Cycle The part may be reflowed 2 times without degradation (typical for lead free processing). Tape and Reel Tape Size 8mm Do Tape Constant Dimensions Table 1 D1 min mm 1.5 E1 Po P mm 1.5 ±0.1 ± mm ±0.05 ±0.1 S1 min T T Tape Variable Dimensions Table 2 Tape Size B1 E2 min 8mm ±0.05 F P1 4.0 ±0.1 Dimensions in mm T2 W Ao, Bo & Ko Note 1 Drawing Not to scale Note 1: Embossed cavity to conform to EIA 481-B Reel Size Reel Dimensions (may vary) Table 3 A B C D Inches mm Inches mm mm mm Tape size Copyright 2015, Pletronics Inc th Ave. W, Lynnwood, WA USA Pg 5
6 Important Notice Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and other changes to this product at anytime. PLE reserves the right to discontinue any product or service without notice. Customers are responsible for obtaining the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to PLE s terms and conditions of sale supplied at the time of order acknowledgment. PLE warrants performance of this product to the specifications applicable at the time of sale in accordance with PLE s limited warranty. Testing and other quality control techniques are used to the extent PLE deems necessary to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of each product is not necessarily performed. PLE assumes no liability for application assistance or customer product design. Customers are responsible for their products and applications using PLE components. To minimize the risks associated with the customer products and applications, customers should provide adequate design and operating safeguards. PLE products are not designed, intended, authorized or warranted to be suitable for use in life support applications, devices or systems or other critical applications that may involve potential risks of death, personal injury or severe property or environmental damage. Inclusion of PLE products in such applications is understood to be fully at the risk of the customer. Use of PLE products in such applications requires the written approval of an appropriate PLE officer. Questions concerning potential risk applications should be directed to PLE. PLE does not warrant or represent that any license, either express or implied, is granted under any PLE patent right, copyright, artwork or other intellectual property right relating to any combination, machine or process which PLE product or services are used. Information published by PLE regarding third-party products or services does not constitute a license from PLE to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from PLE under the patents or other intellectual property of PLE. Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such altered documents. Resale of PLE products or services with statements different from or beyond the parameters stated by PLE for that product or service voids all express and implied warranties for the associated PLE product or service and is an unfair or deceptive business practice. PLE is not responsible for any such statements. Contacting Pletronics Inc. Pletronics, Inc. Tel: th Ave. West Fax: Lynnwood, WA ple-sales@pletronics.com U.S.A. URL: Copyright 2015, Pletronics Inc th Ave. W, Lynnwood, WA USA Pg 6
PLETRONICS TCD3 Series
TCD3 3.2 x 5.0 x 1.50 mm LCC Ceramic Package Features Pletronics TCD3 Stratum-III Type Series Temperature Compensated Crystal Oscillator Optional Voltage Control Function Low Power / Fast Warm Up Clipped
PLETRONICS TCD4 FEMTOCELL Series
TCD4 Femto 3.2 x 5.0 x 1.50 mm LCC Ceramic Package Features Pletronics TCD4 Femtocell Series Temperature Compensated Crystal Oscillator Optional Voltage Control Function Low Power / Fast Warm Up Clipped
PLETRONICS THA3 Series
THA3 5.0 x 7.0 x 2.6 mm LCC Ceramic Package Features Pletronics THA3 Stratum-III Type Series Temperature Compensated Crystal Oscillator Optional Voltage Control Function Low Power / Fast Warm Up CMOS Output
PLETRONICS OeD4 Series
OeD4 3.2 x 5.0 x 1.50 mm LCC Ceramic Package Features Pletronics OeXO Series Ovenized equivalent Temperature Compensated Crystal Oscillator Optional Voltage Control Function Low Power / Fast Warm Up CMOS
SM44T Series 3.3 V CMOS Clock Oscillators April 2017
Pletronics SM44 Series is a quartz crystal controlled precision square wave generator with a CMOS output. The package is designed for high density surface mount designs. This is a low cost mass produced
SM55TZ Series V CMOS Clock Oscillators November 2018
Pletronics SM55 Series is a quartz crystal controlled precision square wave generator with a CMOS output. The package is designed for high density surface mount designs. This is a low cost mass produced
S K CMOS Clock Oscillator
Pletronics S3883 is a quartz crystal controlled precision square wave generator with a CMOS output. The package is designed for high density surface mount designs. This is a low cost mass produced oscillator.
SM55T Series 3.3 V CMOS Clock Oscillators November 2018
November 208 Pletronics SM55 Series is a quartz crystal controlled precision square wave generator with a CMOS output. The package is designed for high density surface mount designs. This is a low cost
TCD M Microcell, Femtocell TCVCXO Oscillator
TCD405110.0M Microcell, Femtocell Pletronics TCD4 Series is a temperature compensated voltage controlled crystal oscillator with a clipped sinewave output. The package is designed for high density surface
SM77D Series 3.3 V CMOS Clock Oscillators January 2016
January 206 Pletronics SM77D Series is a quartz crystal controlled precision square wave generator with a CMOS output. The SM77D series will directly interface TTL devices also. The package is designed
O OeD M TCVCXO Oscillator
O OeD420620.00M Pletronics OeD4 is from the OeXO Series of temperature compensated voltage controlled crystal oscillator with a CMOS output. Cut Tape or Tape and Reel packaging 3.2 x 5 mm LCC Ceramic Package
DISCONTINUED. SM77H Series 5.0V CMOS Clock Oscillators
Pletronics SM77H Series is a quartz crystal controlled precision square wave generator with a CMOS output. The package is designed for high density surface mount designs. This is a low cost mass produced
LV55D Series 3.3 V LVDS Clock Oscillators February 2016
LV55D Series 3.3 V February 206 Pletronics LV55D Series is a quartz crystal controlled precision square wave generator with an LVDS output. The package is designed for high density surface mount designs.
LV77D Series 3.3 V LVDS Clock Oscillators
Pletronics LV77D Series is a quartz crystal controlled precision square wave generator with an LVDS output. The package is designed for high density surface mount designs. Low cost mass produced oscillator.
LV77D Series 2.5 V LVDS Clock Oscillators November 2018
Pletronics LV77D Series is a quartz crystal controlled precision square wave generator with an LVDS output. The package is designed for high density surface mount designs. Low cost mass produced oscillator.
SM13T Series Miniature SMD Crystal February 2015
The Pletronics SM13T Series is a miniature surface mount crystal. The package is ideal for automated surface mount assembly and reflow practices. Tape and Reel packaging 6 MHz to 70 MHz Fundamental 40
LV11B Series 3.3 V LVDS Clock Oscillators January 2014
January 2014 This device is supported for legacy designs only, LV11B is not recommended for new designs. Pletronics LV11B Series is a quartz crystal controlled precision square wave generator with an LVDS
SM45 Series Miniature SMD Crystal
The Pletronics SM45 Series is a miniature surface mount crystal The package is ideal for automated surface mount assembly and reflow practices. Tape and Reel packaging 3 MHz to 70 MHz 5 x 13 x 5 mm 4 pad
SM25 / SM30 / SM42 Series Miniature SMD Crystal February 2015
The Pletronics SM42 Series is a miniature surface mount crystal The package is ideal for automated surface mount assembly and reflow practices. Tape and Reel packaging 3 MHz to 70 MHz AT Cut Crystal SM42:
FD5T Series FD51xxT KHz CMOS Clock Oscillator March 2009
FD5T Series FD51xxT-32.768KHz Pletronics FD51T Series is a quartz crystal controlled precision square wave generator Output frequency 32.768KHz Selectable low jitter or spread spectrum output. Device characteristics
P113SD Series 2.5 V CMOS Clock Oscillators
Pletronics P113SD Series is a quartz crystal controlled precision square wave generator with a CMOS output. The P113SD series will directly interface TTL devices also. Greatly reduces RFI and EMI system
DISCONTINUED. SQ33D Series 5.0 V CMOS Clock Oscillators
Pletronics SQ33D Series is a quartz crystal controlled precision square wave generator with a CMOS output. The SQ33D series will directly interface TTL devices also. Greatly reduces RFI and EMI system
MP49 Series HC-49/U Crystal February 2015
The Pletronics MP49 Series is a thru-hole crystal Bulk packaging 1.8 MHz to 210 MHz AT Cut Crystal Pletronics Inc. certifies this device is in accordance with the RoHS (2011/65/EC) and WEEE (2002/96/EC)
FD5T Series Programmable CMOS Clock Oscillator November 2008
FD5T Series Programmable Pletronics FD5T Series is a quartz crystal controlled precision square wave generator with a programmable CMOS output Output frequency from 12 KHz to 230 MHZ Selectable low jitter
Application Note 809 Comparison of using a Crystal Oscillator or a Crystal February 2009 by: Bob Gubser
Application Note 809 Comparison of using a Crystal Oscillator or a Crystal February 2009 by: Bob Gubser ABSTRACT When doing a new design that requires controlled timing, a common consideration is to determine
TL317 3-TERMINAL ADJUSTABLE REGULATOR
Voltage Range Adjustable From 1.2 V to 32 V When Used With an External Resistor Divider Current Capability of 100 ma Input Regulation Typically 0.01% Per Input-Voltage Change Regulation Typically 0.5%
VT-840 VT-840. Temperature Compensated Crystal Oscillator, Voltage Controlled Temperature Compensated Crystal Oscillator.
VT-840 Temperature Compensated Crystal Oscillator, Voltage Controlled Temperature Compensated Crystal Oscillator VT-840 Description Vectron s VT-840 Temperature Compensated Crystal Oscillator (TCXO) is
VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4
VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4 VT-800 Description Vectron s VT-800 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine
VT-841 VT-841. Temperature Compensated Crystal Oscillator. Description. Applications. Features. Block Diagram. Output V DD.
VT-841 Temperature Compensated Crystal Oscillator VT-841 Description Vectron s VT-841 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output, analog temperature
POSITIVE-VOLTAGE REGULATORS
SLVS010N JANUARY 1976 REVISED NOVEMBER 2001 3-Terminal Regulators Current up to 100 No External Components Internal Thermal-Overload Protection Internal Short-Circuit Current Limiting Direct Replacements
1.5 C Accurate Digital Temperature Sensor with SPI Interface
TMP TMP SBOS7B JUNE 00 REVISED SEPTEMBER 00. C Accurate Digital Temperature Sensor with SPI Interface FEATURES DIGITAL OUTPUT: SPI-Compatible Interface RELUTION: -Bit + Sign, 0.0 C ACCURACY: ±. C from
Features. Typical Configuration ZXGD3113W6. Top View Pin-Out
SYNCHRONOUS MOSFET CONTROLLER IN Description The is intended to drive a MOSFET configured as an ideal diode replacement. The device is comprised of a differential amplifier detector stage and high current
VT-860 Temperature Compensated Crystal Oscillator
VT-860 Temperature Compensated Crystal Oscillator VT-860 Description Vectron s VT-860 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, Clipped sine wave output, analog temperature
VT-802 VT-802. Temperature Compensated Crystal Oscillator. Description
T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,
LM124, LM124A, LM224, LM224A LM324, LM324A, LM2902 QUADRUPLE OPERATIONAL AMPLIFIERS
Wide Range of Supply Voltages: Single Supply...3 V to 30 V (LM2902 3 V to 26 V) or Dual Supplies Low Supply Drain Independent of Supply Voltage... 0.8 Typ Common-Mode Input Voltage Range Includes Ground
LM317 3-TERMINAL ADJUSTABLE REGULATOR
3-TERMINAL ABLE REGULATOR Output Voltage Range Adjustable From 1.25 V to 37 V Output Current Greater Than 1.5 A Internal Short-Circuit Current Limiting Thermal Overload Protection Output Safe-Area Compensation
Ordering Information PT5521 =3.3 Volts PT5522 =2.5 Volts PT5523 =2.0 Volts PT5524 =1.8 Volts PT5525 =1.5 Volts PT5526 =1.2 Volts PT5527 =1.
PT552 Series 1.5-A 5-V/3.3-V Input Adjustable Integrated Switching Regulator SLTS147A (Revised 1/5/21) Features Single-Device: 5V/3.3V Input DSP Compatible 89% Efficiency Small Footprint Space-Saving package
TL494 PULSE-WIDTH-MODULATION CONTROL CIRCUITS
Complete PWM Power-Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
NE555, SA555, SE555 PRECISION TIMERS
Timing From Microseconds to Hours Astable or Monostable Operation Adjustable Duty Cycle TTL-Compatible Output Can Sink or Source up to 00 ma Designed To Be Interchangeable With Signetics NE, SA, and SE
VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator
VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator Features Clipped Sine Wave Output Output Frequencies to 27 MHz Fundamental Crystal Design Optional VCXO Function available Gold
Package Pin Out Configuration. Part Number Compliance Marking Reel Size (inch) Tape Width (mm) Quantity per Reel UMC4NQ-7 Automotive NP ,000
YM DUAL COMPLEMENTARY PRE-BIASED TRANSISTORS Features Ultra-Small Surface Mount Package Surface Mount Package Suited for Automated Assembly Simplifies Circuit Design and Reduces Board Space Totally Lead-Free
50ppm/ C, 50µA in SOT23-3 CMOS VOLTAGE REFERENCE
REF312 REF32 REF325 REF333 REF34 MARCH 22 REVISED MARCH 23 5ppm/ C, 5µA in SOT23-3 CMOS VOLTAGE REFERENCE FEATURES MicroSIZE PACKAGE: SOT23-3 LOW DROPOUT: 1mV HIGH OUTPUT CURRENT: 25mA LOW TEMPERATURE
IMPORTANT NOTICE Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to obtain the
Model 356P/L Advanced PLL LVPECL or LVDS VCXO
Features Ceramic Surface Mount Package Low Phase Jitter Performance, 500fs Typical Advanced PLL Design w/ Low Fundamental Crystal Frequency Range 10MHz 800MHz * +2.5V or +3.3V Operation Output Enable Standard
MC3486 QUADRUPLE DIFFERENTIAL LINE RECEIVER WITH 3-STATE OUTPUTS
Meets or Exceeds the Requirements of ANSI Standards EIA/TIA-422-B and EIA/TIA-423-B and ITU Recommendations V.10 and V.11 3-State, TTL-Compatible s Fast Transition Times Operates From Single 5-V Supply
Model 653 Very Low Jitter LVPECL or LVDS Clock
Features Ceramic Surface Mount Package Very Low Phase Jitter Performance, 500fs Maximum Fundamental or 3 rd Overtone Crystal Design Frequency Range 10 320MHz * +2.5V or +3.3V Operation Output Enable Standard
Ultra Low Quiescent Current 5V/150mA Fixed-Voltage Ultra Low LDO
Ultra Low Quiescent Current 5V/150mA Fixed-Voltage Ultra Low LDO DESCRIPTION TS4264 is a 5V low-drop fixed-voltage regulator in an SOT-223 package. The IC regulates an input voltage in the range of 5.5V
MAX232, MAX232I DUAL EIA-232 DRIVER/RECEIVER
Operates With Single 5-V Power Supply LinBiCMOS Process Technology Two Drivers and Two Receivers ± 30-V Input Levels Low Supply Current...8 ma Typical Meets or Exceeds TIA/EIA-232-F and ITU Recommendation
High-Side Measurement CURRENT SHUNT MONITOR
INA39 INA69 www.ti.com High-Side Measurement CURRENT SHUNT MONITOR FEATURES COMPLETE UNIPOLAR HIGH-SIDE CURRENT MEASUREMENT CIRCUIT WIDE SUPPLY AND COMMON-MODE RANGE INA39:.7V to 40V INA69:.7V to 60V INDEPENDENT
AM26LS31 QUADRUPLE DIFFERENTIAL LINE DRIVER
AM6LS SLLSG JANUARY 979 REVISED FEBRUARY Meets or Exceeds the Requirements of ANSI TIA/EIA--B and ITU Recommendation V. Operates From a Single -V Supply TTL Compatible Complementary Outputs High Output
Model 633 Very Low Jitter LVPECL or LVDS Clock
Features Ceramic Surface Mount Package Very Low Phase Jitter Performance, 500fs Maximum Fundamental or 3 rd Overtone Crystal Design Frequency Range 10 220MHz * +2.5V or +3.3V Operation Output Enable Standard
3-Termal 500mA Negative Voltage Regulator
3-Termal 500mA Negative Voltage Regulator DESCRIPTION The TS79M00 series of fixed output negative voltage regulators are intended as complements to the popular TS78M00 series device. These negative regulators
ST619LBDR. DC-DC converter regulated 5 V charge pump. Features. Description
DC-DC converter regulated 5 V charge pump Features Regulated 5 V ±4 % charge pump Output current guaranteed over temperature: 20 ma (V I 2 V), 30 ma (V I 3 V) No inductors; very low EMI noise Uses small,
Complementary Switch FET Drivers
Complementary Switch FET Drivers application INFO available FEATURES Single Input (PWM and TTL Compatible) High Current Power FET Driver, 1.0A Source/2A Sink Auxiliary Output FET Driver, 0.5A Source/1A
TL594 PULSE-WIDTH-MODULATION CONTROL CIRCUIT
Complete PWM Power Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
ADC114YUQ. Mechanical Data. Features. Ordering Information (Notes 4 & 5) Marking Information NXX 1Y7 YM NXX YM
NXX YM NPN PRE-BIASED SMALL SIGNAL DUAL SURFACE MOUNT TRANSISTOR Features Mechanical Data Epitaxial Planar Die Construction Built-In Biasing Resistors Totally Lead-Free & Fully RoHS Compliant (Notes &
VV-701 Voltage Controlled Crystal Oscillator Previous Vectron Model VVC1/VVC2
-701 oltage Controlled Crystal Oscillator Previous ectron Model C1/C2-701 Description ectron s -701 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator with a CMOS output.
VX-805 Voltage Controlled Crystal Oscillator
VX-805 Voltage Controlled Crystal Oscillator VX-805 Description The VX-805 is a Voltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
Low noise low drop voltage regulator with shutdown function. Part numbers
Low noise low drop voltage regulator with shutdown function Features Output current up to 150 ma Low dropout voltage (350 mv at I OUT = 50 ma) Very low quiescent current: 0.1 µa in OFF mode and max. 250
POSITIVE-VOLTAGE REGULATORS
The µa78m10 and µa78m15 are 3-Terminal Regulators Output Current Up To 500 No External Components Internal Thermal-Overload Protection KC (TO-220) PACKAGE (TOP IEW) µa78m00 SERIES POSITIE-OLTAGE REGULATORS
Ultra Low Quiescent Current 5V/150mA Fixed-Voltage Ultra Low LDO
Ultra Low Quiescent Current 5V/150mA Fixed-Voltage Ultra Low LDO DESCRIPTION The TS4264GCW50 is a monolithic integrated low-drop fixed voltage regulator which can supply loads up to 150mA. It is functional
4423 Typical Circuit A2 A V
SBFS020A JANUARY 1978 REVISED JUNE 2004 FEATURES Sine and Cosine Outputs Resistor-Programmable Frequency Wide Frequency Range: 0.002Hz to 20kHz Low Distortion: 0.2% max up to 5kHz Easy Adjustments Small
LM158, LM158A, LM258, LM258A LM358, LM358A, LM2904, LM2904Q DUAL OPERATIONAL AMPLIFIERS
Wide Range of Supply oltages: Single Supply...3 to 30 (LM2904 and LM2904Q...3 to 26 ) or Dual Supplies Low Supply-Current Drain Independent of Supply oltage... 0.7 Typ Common-Mode Input oltage Range Includes
VT-701 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC2
T-701 Temperature Compensated Crystal Oscillator Previous ectron Model TC2 T-701 Description ectron s T-701 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output,
TX-801 Temperature Compensated Crystal Oscillator
TX-801 Temperature Compensated Crystal Oscillator TX-801 Features Applications The TX-801 TCXO provides fully compliant Stratum 3 levels of stability in a 5x3.2mm package. It is ideal for timing over IP
TL780 SERIES POSITIVE-VOLTAGE REGULATORS
±1% Output Tolerance at ±2% Output Tolerance Over Full Operating Range Thermal Shutdown description Internal Short-Circuit Current Limiting Pinout Identical to µa7800 Series Improved Version of µa7800
Current Mode PWM Controller
Current Mode PWM Controller application INFO available FEATURES Optimized for Off-line and DC to DC Converters Low Start Up Current (
VX-703 Data Sheet VX-703. Voltage Controlled Crystal Oscillator Previous Vectron Model V-Type. Description. Features. Applications.
X-703 Data Sheet oltage Controlled Crystal Oscillator Previous ectron Model -Type X-703 Description ectron s X-703 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator
VX-705 Voltage Controlled Crystal Oscillator
X-705 oltage Controlled Crystal Oscillator X-705 Description The X-705 is a oltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at ore.hu.
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at www.hest ore.hu. Convert TTL Voltage Levels to MOS Levels High Sink-Current Capability Clamping
SN54LS245, SN74LS245 OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
3-State s Drive Bus Lines Directly PNP s Reduce dc Loading on Bus Lines Hysteresis at Bus s Improves Noise Margins Typical Propagation Delay Times Port to Port, 8 ns TYPE IOL (SINK CURRENT) IOH (SOURCE
µa78m00 SERIES POSITIVE-VOLTAGE REGULATORS
The µa78m15 is obsolete and 3-Terminal Regulators Output Current Up To 500 No External Components Internal Thermal-Overload Protection KC (TO-220) PACKAGE (TOP IEW) µa78m00 SERIES POSITIE-OLTAGE REGULATORS
Description. Block Diagrams. Figure 1b. Crystal-Based Multiplier w/saw
C-501 oltage Controlled Crystal Oscillator C-501 Description The C-501 is a voltage controlled crystal oscillator that is housed in a hermetic 14.0 x 9.0 x 4.5mm ceramic package. Depending upon the frequency
Device Symbol. Part Number Compliance Marking Reel Size (inches) Tape Width (mm) Quantity Per Reel BC846ASQ-7-F Automotive KNS 7 8 3,000
KNS YM 65V DUAL NPN SMALL SIGNAL TRANSISTOR Description Mechanical Data This Bipolar Junction Transistor (BJT) is designed to meet the stringent requirements of Automotive Applications. Features BV CEO
500mA Ultra Low Dropout Voltage Regulator With Inhibit Function
500mA Ultra Low Dropout Voltage Regulator With Inhibit Function DESCRIPTION The TS2938 series of fixed-voltage monolithic micropower voltage regulators is designed for a wide range of applications. This
Applications Q2 E2. Device Symbol. Product Marking Reel size (inches) Tape width (mm) Quantity per reel ZXTC2063E6TA ,000
YM ADVANCE INFORMATION 40V COMPLEMENTARY MEDIUM POWER TRANSISTOR IN SOT26 Features NPN + PNP Combination BV CEO > 40 (-40)V BV ECO > 6 (-3)V M = 9 (-9)A Peak Pulse Current V CE(sat) < 60 (-90)mV @ 1A R
LM317M 3-TERMINAL ADJUSTABLE REGULATOR
FEATURES Output Voltage Range Adjustable From 1.25 V to 37 V Output Current Greater Than 5 ma Internal Short-Circuit Current Limiting Thermal-Overload Protection Output Safe-Area Compensation Q Devices
TL750L, TL751L SERIES LOW-DROPOUT VOLTAGE REGULATORS
TL70L, TL7L SERIES LOW-DROPOUT OLTAGE REGULATORS SLS07P SEPTEMBER 987 REISED FEBRUARY 2003 ery Low Dropout oltage, Less Than 0.6 at 0 ma ery Low Quiescent Current TTL- and CMOS-Compatible Enable on TL7L
TPS51124 User s Guide. SLUU252A APRIL 2006 Revised JULY High Performance Synchronous Buck EVM Using the TPS User s Guide
High Performance Synchronous Buck EVM Using the TPS51124 User s Guide 1 SLUU252A APRIL 2006 Revised JULY 2008 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right
Top View BAT54T BAT54AT BAT54CT BAT54ST
SURFACE MOUNT SCHOTTKY BARRIER DIODE Features Mechanical Data Ultra-Small Surface Mount Package Low Forward Voltage Drop Fast Switching PN Junction Guard Ring for Transient and ESD Protection Totally Lead-Free
VT-501 Temperature Compensated Crystal Oscillator Previous Vectron Model VTD3
T-501 Temperature Compensated Crystal Oscillator Previous ectron Model TD3 T-501 Description ectron s T-501 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog
18 SH Product series. Package size. 32 for 3.2x2.5x1.0 mm 53 for 5x3.2x1.2 mm
The SH series is an extremely low power precision silicon oscillator with a total frequency error of less than.0%. This Si-gate CMOS oscillator produces a square wave output and requires no external components
Ultra Low Jitter LVPECL or LVDS Clock
Features Ceramic Surface Mount Package Ultra Low Phase Jitter Performance, 100fs Typical Fundamental or 3 rd Overtone Crystal Design Frequency Range 80 170MHz * +2.5V or +3.3V Operation Output Enable Standard
SN5404, SN54LS04, SN54S04, SN7404, SN74LS04, SN74S04 HEX INVERTERS
Dependable Texas Instruments Quality and Reliability description These devices contain six independent inverters. SN5404, SN54LS04, SN54S04, SN5404... J PACKAGE SN54LS04, SN54S04... J OR W PACKAGE SN7404...
ADVANCED INFORMATION
1A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Product Summary V RRM (V) I O (A) V F(MAX) (V) @ +25 C I R(MAX) (µa) @ +25 C 80 1 0.80 5 Description and Applications Features and Benefits Low Forward Voltage
THS6092, THS ma, +12 V ADSL CPE LINE DRIVERS
Remote Terminal ADSL Line Driver Ideal for Both Full Rate ADSL and G.Lite Compatible With 1:2 Transformer Ratio Wide Supply Voltage Range 5 V to 14 V Ideal for Single Supply 12-V Operation Low 2.1 pa/
Frequency Shift Keyed Silicon Oscillators FH32 and FH53 Series
The FH series is an extremely low power precision Frequency shift keyed silicon oscillator with a total frequency error less than 1.0%. This Si-gate CMOS oscillator produces a square wave output and requires
LM325 LM325 Dual Voltage Regulator
LM325 LM325 Dual Voltage Regulator Literature Number: SNOSBS9 LM325 Dual Voltage Regulator General Description This dual polarity tracking regulator is designed to provide balanced positive and negative
IQXT IQXT-205-3
IQXT-205-3 IQXT-205-3 is a 2.0 x 1.6mm SMD Temperature Compensated Crystal Oscillator (TCXO) in a hermetically Model Name IQXT-205-3-18 IQXT-205-3-25 IQXT-205-3-28 IQXT-205-3-30 IQXT-205-3-33 A 1.8V version
Green. Part Number Compliance Case Packaging DBF Commercial DBF 3,000/Tape & Reel
Green 3A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Product Summary (@T A = +25 C) V RRM (V) I O (A) V F (V) I R (μa),000 3.0 5 Features and Benefits Glass Passivated Die Construction Miniature Package
CD4066B CMOS QUAD BILATERAL SWITCH
5-V Digital or ±7.5-V Peak-to-Peak Switching 5-Ω Typical On-State Resistance for 5-V Operation Switch On-State Resistance Matched to Within 5 Ω Over 5-V Signal-Input Range On-State Resistance Flat Over
1OE 3B V GND ORDERING INFORMATION. TOP-SIDE MARKING QFN RGY Tape and reel SN74CBTLV3126RGYR CL126 PACKAGE
SN74CBTLV326 LOW-VOLTAGE QUADRUPLE FET BUS SWITCH SCDS03H DECEMBER 997 REVISED APRIL 2003 Standard 26-Type Pinout 5-Ω Switch Connection Between Two Ports Isolation Under Power-Off Conditions Latch-up Performance
80mA Low Noise Ultra Low Dropout Voltage Regulator
80mA Low Noise Ultra Low Dropout Voltage Regulator DESCRIPTION The TS5204 series is an efficient linear voltage regulator with ultra-low noise output, very low dropout voltage (typically 20mV at light
3-Terminal 500mA Positive Voltage Regulator
3-Terminal 500mA Positive Voltage Regulator DESCRIPTION The TS78M00 Series positive voltage regulators are identical to the popular TS7800 Series devices, except that they are specified for only half the
Current Mode PWM Controller
application INFO available UC1842/3/4/5 Current Mode PWM Controller FEATURES Optimized For Off-line And DC To DC Converters Low Start Up Current (
ORDERING INFORMATION PACKAGE
Member of Texas Instruments Widebus Family State-of-the-Art Advanced Low-Voltage BiCMOS (ALB) Technology Design for.-v Operation Schottky Diodes on All s to Eliminate Overshoot and Undershoot Industry
Features. Drain SOT23 D. Gate. Source. Part Number Case Packaging DMG3414UQ-7 SOT23 3,000/Tape & Reel DMG3414UQ-13 SOT23 10,000/Tape & Reel
N-CHANNEL ENHANCEMENT MODE MOSFET Product Summary Features V (BR)DSS 2V Description R DS(ON) max 25mΩ @ V GS = 4.5V I D max T A = +25 C 9A 29mΩ @ V GS = 2.5V 5.5A 37mΩ @ V GS = 1.8V 4.8A This MOSFET is
Green. Pin Diagram. Part Number Compliance Case Packaging HDS20M-13 Commercial HDS 5,000/Tape & Reel
Green 2A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Product Summary (@T A = +25 C) V RRM (V) I O (A) V F (V) I R (μa) 1000 2 0.95 5 Features and Benefits Glass Passivated Die Construction Miniature
High Speed PWM Controller
High Speed PWM Controller application INFO available FEATURES Compatible with Voltage or Current Mode Topologies Practical Operation Switching Frequencies to 1MHz 50ns Propagation Delay to Output High
3-Termal 100mA Positive Voltage Regulator
3-Termal 100 Positive Voltage Regulator DESCRIPTION The TS78L00 Series of positive voltage Regulators are inexpensive, easy-to-use devices suitable for a multitude of applications that require a regulated