This bulletin is to notify all customers of the termination of the following Ecliptek series effective March 1 st, 2002:
|
|
|
- Melinda Young
- 5 years ago
- Views:
Transcription
1 Marketing Bulletin DATE: March 6, 2003 TO: FROM: RE: Affected Customers Mark Stoner Product Termination To all concerned parties, This bulletin is to notify all customers of the termination of the following Ecliptek series effective March 1 st, 2002: Series Description ES11C7 Ceramic 5 x 7 x 1.2mm (VC)TCXO, 5V ES13C7 Ceramic 5 x 7 x 1.2mm (VC)TCXO, 3.3V Because of the circumstances surrounding this termination, there will be no end-of-life policy exercised. The series will be terminated with no purchasing or lifetime buy window available. The recommended alternative to the ES13C7 is the ES52C8 series. There will be no replacement for the ES11C7. All of us at Ecliptek Corporation apologize for any inconvenience this may have caused and can assure you we are taking measures to insure this will not happen again in the future. Best Regards, Mark W. Stoner Director of Marketing Ecliptek Corporation 3545 CADILLAC AVENUE COSTA MESA, CA (714) Fax (714)
2 ES11C7 Series Temperature Compensated Crystal Oscillator (TCXO) Clipped Sinewave Output 5.0V Supply Voltage Ceramic 8-pad SMD package Stability to 1.5ppm External voltage control option available ES11C7 OSCILLATOR H 1.8 L 7.0 W 5.0 NOTES ELECTRICAL SPECIFICATIONS Nominal Frequency Storage Temperature Range Operating Temperature Range Supply Voltage (V DD ) Load Drive Capability Input Current Aging (at 25ºC) External Trim (Voltage Control Option) Output Voltage Frequency Stability Start Up Time Harmonics Typical Phase Noise 1.5V DC ±1.0V DC ; Positive Transfer Characteristic vs. Operating Temperature Range vs. Frequency Tolerance (25 C ±2 C) vs. Input Voltage (±5%) vs. Load (±1kΩ//±1pF) 2nd Harmonic 3rd Harmonic Other At offset of 10Hz At offset of 100Hz At offset of 1kHz At offset of 10kHz At offset of 100kHz 13.0MHz, 19.2MHz, 19.68MHz, or 19.8MHz -30 C to 85 C 5.0V DC ±5% 10kOhms // 10pF 2.0mA Maximum ±1ppm / Year Maximum ±8ppm Minimum 1.0Vp-p Clipped Sinewave Minimum ±2.0ppm Maximum ±0.3ppm Maximum ±0.2ppm Maximum 5mSec Maximum -3dBc Maximum -6dBc Maximum -10dBc Maximum -80dBc/Hz Maximum -125dBc/Hz Maximum -145dBc/Hz Maximum -148dBc/Hz Maximum -150dBc/Hz Maximum ECLIPTEK CORP. OSCILLATOR ES11C7 CERAMIC 5.0V OS94 09/ ECLIPTEK for latest revision 168
3 ES11C7 C 25 V M TR PART NUMBERING GUIDE OPERATING TEMP. RANGE One Letter Code Per Table 1 FREQUENCY STABILITY Two Digit Code Per Table 1 OUTPUT CONTROL FUNCTION N=None (No Connection on Pin 1) V=Voltage Control PACKAGING OPTIONS Blank=Bulk TR=Tape and Reel FREQUENCY MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT Pin 1: Control Voltage or No Connection Pin 4: Case Ground Pin 6-7: No Connection Pin 2-3: No Connection Pin 5: Output Pin 8: Supply Voltage TAPE AND REEL DIMENSIONS Tolerances= +0.1 TAPE A B C D E F REEL M N O P Q 16± ± ±.1 4 ±.1 2± MIN 50 MIN 20.2 MIN 13±.2 40 MIN F G H J K L R S T U V QTY/REEL 8±.1 B0* A0*.3 ±.05 K0* 2.5 MIN 10 MIN 22.4 MAX 360 MAX ,000 *Compliant to EIA 481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS Characteristic Specification Line 1: ECLIPTEK Seal Integrity Bubble test in Perfluorocarbon at +125 C ±5 C for 60 seconds minimum. Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Solderability Sn63 Solder dip at +230 C ±5 C for 5 seconds/95% coverage. Marking Permanency 10 Strokes with brush after 1 minute soak in solvent, 3 times. Line 3: XX Y ZZ Shock Thermal Shock Random drop on hard wooden plate 3 times from a height of 50cm. 300 Cycles from -55 C to +125 C, 5 minute dwell Week of Year Last Digit of Year Ecliptek Manufacturing Identifier ECLIPTEK CORP. OSCILLATOR ES11C7 CERAMIC 5.0V OS94 09/ ECLIPTEK for latest revision 169
4 ES13C7 Series Temperature Compensated Crystal Oscillator (TCXO) Low Voltage Clipped Sinewave Output 3.0V Supply Voltage Ceramic 8-pad SMD package Stability to 1.5ppm External voltage control option available ES13C7 OSCILLATOR H 1.8 L 7.0 W 5.0 NOTES ELECTRICAL SPECIFICATIONS Nominal Frequency Storage Temperature Range Operating Temperature Range Supply Voltage (V DD ) Load Drive Capability Input Current Aging (at 25ºC) External Trim (Voltage Control Option) Output Voltage Frequency Stability Start Up Time Harmonics Typical Phase Noise 1.5V DC ±1.0V DC ; Positive Transfer Characteristic vs. Operating Temperature Range vs. Frequency Tolerance (25 C ±2 C) vs. Input Voltage (±5%) vs. Load (±1kΩ//±1pF) 2nd Harmonic 3rd Harmonic Other At offset of 10Hz At offset of 100Hz At offset of 1kHz At offset of 10kHz At offset of 100kHz 13.0MHz, 19.2MHz, MHz, or 19.8MHz -30 C to 85 C 3.0V DC ±5% 10kOhms // 10pF 2.0mA Maximum ±1ppm / Year Maximum ±8ppm Minimum 0.7Vp-p Clipped Sinewave Minimum ±2.0ppm Maximum ±0.3ppm Maximum ±0.2ppm Maximum 5mSec Maximum -3dBc Maximum -6dBc Maximum -10dBc Maximum -80dBc/Hz Maximum -125dBc/Hz Maximum -145dBc/Hz Maximum -148dBc/Hz Maximum -150dBc/Hz Maximum ECLIPTEK CORP. OSCILLATOR ES13C7 CERAMIC 3.0V OS95 09/ ECLIPTEK for latest revision 170
5 ES13C7 C 25 V M TR PART NUMBERING GUIDE OPERATING TEMP. RANGE One Letter Code Per Table 1 FREQUENCY STABILITY Two Digit Code Per Table 1 EXTERNAL TRIM N=None (No Connection on Pin 1) V=Voltage Control PACKAGING OPTIONS Blank=Bulk TR=Tape and Reel FREQUENCY MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT Pin 1: Control Voltage or No Connection Pin 4: Case Ground Pin 6-7: No Connection Pin 2-3: No Connection Pin 5: Output Pin 8: Supply Voltage TAPE AND REEL DIMENSIONS Tolerances= +0.1 TAPE A B C D E F REEL M N O P Q 16± ± ±.1 4 ±.1 2± MIN 50 MIN 20.2 MIN 13±.2 40 MIN F G H J K L R S T U V QTY/REEL 8±.1 B0* A0*.3 ±.05 K0* 2.5 MIN 10 MIN 22.4 MAX 360 MAX ,000 *Compliant to EIA 481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS Characteristic Specification Line 1: ECLIPTEK Seal Integrity Bubble test in Perfluorocarbon at +125 C ±5 C for 60 seconds minimum. Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Solderability Sn63 Solder dip at +230 C ±5 C for 5 seconds/95% coverage. Marking Permanency 10 Strokes with brush after 1 minute soak in solvent, 3 times. Line 3: XX Y ZZ Shock Thermal Shock Random drop on hard wooden plate 3 times from a height of 50cm. 300 Cycles from -55 C to +125 C, 5 minute dwell Week of Year Last Digit of Year Ecliptek Manufacturing Identifier ECLIPTEK CORP. OSCILLATOR ES13C7 CERAMIC 3.0V OS95 09/ ECLIPTEK for latest revision 171
VT-802 VT-802. Temperature Compensated Crystal Oscillator. Description
T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,
IQXT IQXT is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package.
IQXT-205-2 IQXT-205-2 is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package. Model Name IQXT-205-2-18 IQXT-205-2-25 IQXT-205-2-28
VT-841 VT-841. Temperature Compensated Crystal Oscillator. Description. Applications. Features. Block Diagram. Output V DD.
VT-841 Temperature Compensated Crystal Oscillator VT-841 Description Vectron s VT-841 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output, analog temperature
QTCT570 SERIES 5 x 7mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to MHz Description
Description Q-Tech s surface-mount QTCT570 oscillators consist of an IC 2.8Vdc, 3.3Vdc clock TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range
QTCT350 SERIES 3.2 x 5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 5.0Vdc MHz to 52.
Description Q-Tech s surface-mount QTCT350 oscillators consist of an IC 3.3Vdc, 5.0Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from
IQXT IQXT-205-3
IQXT-205-3 IQXT-205-3 is a 2.0 x 1.6mm SMD Temperature Compensated Crystal Oscillator (TCXO) in a hermetically Model Name IQXT-205-3-18 IQXT-205-3-25 IQXT-205-3-28 IQXT-205-3-30 IQXT-205-3-33 A 1.8V version
QTCT220 SERIES 2.0 x 2.5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to 52.
5PeNdTbfTaY Q-Tech s surface-mount QTCT220 oscillators consist of an IC 3.3Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from 10.000MHz
TEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR
TEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR ASTX-12, ASVTX-12 FEATURES: 2.5 X 2.0 X 0.9mm APPLICATIONS: Ultra miniature and low height 0.9mm. Low current consumption 2mA. Vc function
T C X O and Logic: TTL / HCMOS V C T C X O Wave Form: Square Wave
T C X O and Logic: TTL / HCMOS V C T C X O Wave Form: Square Wave Product Summary: SQUARE MERCURY Since 1973 TCXO VCTCXO Available Frequency Range Output Wave Form: Square Wave Package size (mm), L x W
VT-840 VT-840. Temperature Compensated Crystal Oscillator, Voltage Controlled Temperature Compensated Crystal Oscillator.
VT-840 Temperature Compensated Crystal Oscillator, Voltage Controlled Temperature Compensated Crystal Oscillator VT-840 Description Vectron s VT-840 Temperature Compensated Crystal Oscillator (TCXO) is
VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4
VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4 VT-800 Description Vectron s VT-800 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine
VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator
VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator Features Clipped Sine Wave Output Output Frequencies to 27 MHz Fundamental Crystal Design Optional VCXO Function available Gold
Rakon Product Proposal
IT2200A -- SMD Temperature Compensated Crystal Oscillators -- -- Low cost SMD TCXO with voltage control option using an analogue IC for compensation. Frequencies ranging from 10MHz to 52MHz. -- Product
VT-860 Temperature Compensated Crystal Oscillator
VT-860 Temperature Compensated Crystal Oscillator VT-860 Description Vectron s VT-860 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, Clipped sine wave output, analog temperature
VT-701 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC2
T-701 Temperature Compensated Crystal Oscillator Previous ectron Model TC2 T-701 Description ectron s T-701 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output,
VT-501 Temperature Compensated Crystal Oscillator Previous Vectron Model VTD3
T-501 Temperature Compensated Crystal Oscillator Previous ectron Model TD3 T-501 Description ectron s T-501 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog
Rakon Product Proposal
RTX5032A -- SMD Temperature Compensated Crystal Oscillator -- -- High performance TCXO offering excellent Phase Noise, Frequency Stability and VCO tilt compensation. -- Product description -- The RTX5032A
OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-304 The OX-304 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -173 dbc/hz in a compact
CXOLAT CXOLAT 1.8V CXOLAT 2.5V CXOLAT 3.0V CXOLAT 3.3V
CXOLAT he CXOLAT 32.768kHz surface-mount oscillator achieves the low power comparable with a tuning fork design and the fast start-up and tight frequency stability attained by an AT cut crystal design.
OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-204 OX-204 The OX-204 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -175 dbc/hz. Designed
VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator
VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator Features CMOS Square Wave Output Enable Disable Feature Output Frequencies to 30 MHz Fundamental Crystal Design Optional VCXO function
CMOS/LVCMOS HF VCXO AE-X32BXX-X Series
CMOS/LVCMOS HF VCXO Description The AE-X32BXX Series of voltage controlled crystal oscillators (VCXO) provides high frequency with CMOS/LVCMOS output. The device does not use any frequency multiplication,
OD100LP-Series Low Phase Noise
OD100LP-Series Low Phase Noise VCOCXO1 Description: The Connor-Winfield OD100LP-series is a low phase noise VCOCXO in a 1x1 inch metal package. The OD100LP-series is designed for those applications that
2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Nominal frequency range
CFPT9000 -- SMD Temperature Compensated Crystal Oscillator (PLUTO) -- -- A series of surface mountable 7.0x5.0mm Temperature Compensated Voltage Controlled Crystal Oscillators (TCVCXOs) for medium to high
Lead Finish: T = Standard S = Solder Dip (**) Package Type: 0 = DIP-14 1 = SMD 2 = Gull Wing Supply Voltage: 3 = +3.3V 5 = +5.0V
Description The Q-Tech Analog TCXO encompasses state-of-the-art oscillators with low phase noise, jitter, and tight temperature stability. The TCXO is available in a DIP (QT3003), SMD (QT3013) or Gull
TX-705 Temperature Compensated Crystal Oscillator
TX-705 Temperature Compensated Crystal Oscillator TX-705 Features Applications The TX-705 is a TCXO family designed for applications where superior g-sensitivity and good phase noise together with small
Specification AXIOM210 Rev.: 3 Date: Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package
in Specification AXIOM210 Rev.: 3 Date: 2015-02-17 Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package Parameter min. typ. max. Unit Condition Frequency range 50 130 MHz Standard
MINIATURE LOW POWER SMD OSCILLATOR
MINIATURE LOW POWER SMD OSCILLATOR SERIES LPXO FEATURES + High reliability for low cost + Cheapest available SMD-LPXO + Available in 1.8, 2.6, 2.8, 3.0 and 3.3 VDC (1.7-3.5 VDC) + New standard for low
OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator
OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator OX-043 Features Applications Ultra Low g-sensitivity Low Phase Noise High Stability Frequency Range: 8 MHZ to 15 MHZ Standard Frequency 10 MHz
Rakon Product Proposal
RS1490P XO `Tiger' SMD Clock Oscillator Series High Performance PLL Crystal Clock Oscillator. Product description This PLL XO offers ultra low RMS phase jitter and high frequency stability in an industry
TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator
TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator TX-707 The TX-707 Series TCXO combines innovative manufacturing and the latest technology to provide low phase noise and excellent g-sensitivity.
CXOQ CXOQ 1.8V CXOQ 2.5V CXOQ 3.0V CXOQ 3.3V
CXOQ Statek s ultra miniature and ultra low profile CXOQ oscillators consist of a CMOS/TTL compatible hybrid circuit and a state-ofthe-art, miniature, fundamental-mode crystal. Model Name Description CXOQ
STRATUM 3E High Stability Oven Stabilized Oscillator OH300 Series OCXO / VCOCXO
Available at Digi-Key** www.digikey.com STRATUM 3E High Stability Oven Stabilized Oscillator OH300 Series OCXO / VCOCXO US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Description Connor-Winfield
Description. Block Diagrams. Figure 1b. Crystal-Based Multiplier w/saw
C-501 oltage Controlled Crystal Oscillator C-501 Description The C-501 is a voltage controlled crystal oscillator that is housed in a hermetic 14.0 x 9.0 x 4.5mm ceramic package. Depending upon the frequency
A DROP-IN REPLACEMENT SOLUTION FOR YOUR EMI / EMC COMPLIANCE PROBLEM
3HM57 Group R A DROP-IN REPLACEMENT SOLUTION FOR YOUR EMI / EMC COMPLIANCE PROBLEM The principle sources of the EMI problem come from the system clocks. Therefore, rather than patch the problem with ferrite
O C X O Oven Controlled Crystal Oscillators
What is an OCXO? Relatively speaking, an OCXO performs in the ±0.01~±0.1 ppm range, a TCXO performs in the ±1~±3 ppm range while a non-compensated clock oscillator performs in the ±25, ±50 ppm range. A
Logic & Supply Voltage: L = LVHCMOS +3.3V at 15pF N=LVHCMOS +2.5V at 15pF R = LVHCMOS +1.8V at 15pF
Description Q-Tech s surface-mount QTCC230 oscillators consist of an IC 3.3Vdc, 2.5Vdc, and 1.8Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic package
Other Options Available For An Additional Charge Hot Solder Dip Sn60/Pb40 per MIL-PRF Specifications subject to change without prior notice.
6QeOdUbfUaZ Q-Tech s surface-mount QTCC570 oscillators consist of an IC 5Vdc, 3.3Vdc, 2.5Vdc, and.8vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic
VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1., 2.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 125 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
Model 149 Stratum 3E, 9x14 mm OCXO
Features 10 to 50 MHz Frequency Range Compliant to Stratum 3E of GR1244CORE Surface Mount 3.3V or 5.0V operation Low Jitter/Phase Noise Tape and Reel Packaging Applications Telecom Switching Wireless Communication
OX-400 / OX 401 Oven Controlled Crystal Oscillator
OX-400 / OX 401 Oven Controlled Crystal Oscillator OX-400 / 401 Features 4-Pin Dip Fast warm-up TCXO replacement for better short term stability Frequency Range, 10 MHz to 40 MHz Standard frequencies,
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 The VS-701 VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
VC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
Preliminary Rev. M Accusilicon AS318-B Series Professional Audiophile Crystal Oscillator
Accusilicon AS318-B Series Professional Audiophile Crystal Oscillator Features Extremely low close-in phase noise, designed for professional Audiophile & Recording application. Typical -100dBc @ 10Hz at
Typical Applications Satellite and Deep Space Radiation Tolerance Required Severe Environmental Conditions. 10 MHz 40 MHz 10, 20 MHz
EX-209 Hi-Reliability Evacuated Miniature Crystal Oscillator EX-209 Features 16 pin Double Dip Package Ruggedized hybrid thick film construction Low Power Consumption Legacy Model: EX-245 Typical Applications
MINIATURE LOW POWER SMD OSCILLATOR
MINIATURE LOW POWER SMD OSCILLATOR SERIES LPXO FEATURES + High reliability for low cost + Cheapest available SMD-LPXO + Available in 1.8, 2.6, 2.8, 3.0 and 3.3 VDC (1.7-3.5 VDC) + New standard for low
3.000 MHz MHz. Cat. No.
LOW-PROFILE MICROPROCESSOR CRYSTALS LEADED VERSION MICROPROCESSOR CRYSTALS SPECIFICATIONS Nominal Frequency Frequency Tolerance at 25 C Frequency Stability over temperature 20 C to +70 C Aging Shunt Capacitance
Voltage Controlled Oscillator
Surface Mount Voltage Controlled Oscillator Wide Band 612 to 1200 MHz Features very wide band, 612 to 1200 MHz linear tuning sensitivity, 26-68 MHz/V typ. low phase noise, -139 dbc/hz at 1 MHz offset,
OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator
OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator OX-046 Features Ultra Low G-Sensitivity Low Phase Noise Very High Frequency Frequency Range: 50 MHZ to 250 MHZ Standard Frequency: 100 MHz
RFPT Specifications. SMD Low Acceleration Sensitivity TCXO / TCVCXO. Product description. Applications
RFPT705 -- SMD Low Acceleration Sensitivity TCXO / TCVCXO. -- -- A series of surface mountable Temperature Compensated Voltage Controlled Crystal Oscillators (TCVCXO) for applications where phase noise
Series T7250-T7258, T9250-T9258, T7001-T7013, T9301-T9313 Extended Temperature/COTS XO, 3.3V
Features 20kHz to 100MHz frequency range 5X7 SMD form factor Hermetically sealed for rugged environmental conditions Extremely wide operating temperature range accommodates harsh environments Crystals
TX-801 Temperature Compensated Crystal Oscillator
TX-801 Temperature Compensated Crystal Oscillator TX-801 Features Applications The TX-801 TCXO provides fully compliant Stratum 3 levels of stability in a 5x3.2mm package. It is ideal for timing over IP
MX-503 High Precision Microprocessor Controlled Crystal Oscillator
MX-503 High Precision Microprocessor Controlled Crystal Oscillator MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50
VVC4 Voltage Controlled Crystal Oscillator
C4 oltage Controlled Crystal Oscillator Features ectron s Smallest CXO, 5.0 X 3.2 X 1.2 mm High Frequencies to 77.70 MHz 5.0 or 3.3 operation Linearity 10% Tri-State Output for testing Low jitter < 1ps
ROS
Surface Mount 5V Tuning for PLL IC s 1630 to 1660 MHz Features low pulling wireless communications radio & radar astronomy CASE STYLE: CK605 +RoHS Compliant The +Suffix identifies RoHS Compliance. See
Synchronized Crystal Oscillator, General Requirements. AH-ASCMXXXG-X Series PATENT PENDING
PATENT PENDING Description The Synchronized Crystal Oscillator is intended for use in the system, which requires multiple clocks in different nodes of the system to run synchronously in frequency without
VX-703 Data Sheet VX-703. Voltage Controlled Crystal Oscillator Previous Vectron Model V-Type. Description. Features. Applications.
X-703 Data Sheet oltage Controlled Crystal Oscillator Previous ectron Model -Type X-703 Description ectron s X-703 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator
VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator
VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator Features 2.5 or 3.3 V LVDS 3rd Overtone Crystal for best jitter performance Output frequencies to 270 MHz Low Jitter < 1 ps rms, 12kHz to 20MHz Enable/Disable output
TX-500 Temperature Compensated Crystal Oscillator
TX-500 Temperature Compensated Crystal Oscillator TX-500 Features Low Phase Noise Low power consumption Output: HCMOS, Clipped Sinewave, PECL, True Sinewave Tight Tolerances Frequency range 1 of 6.4-160
Performance Specifications
OX-208 Oven Controlled Crystal Oscillator OX-208 OX-208 The OX-208 is a high stability ovenized crystal oscillator in a 25 x 25 mm package, capable of aging rates of 0.15 /day and temperature stabilities
C
Typical Applications Base Stations Test Equipment Synthesizers Digital Switching Features Surface Mount Package Optional Reflow Process Compatible Optional AT-Cut and SC-Cut Crystal Options Low Profile
VC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
Performance Specifications. Frequency Stabilities 1 ( MHz) -20 to +70 C -40 to +85 C -40 to +95 C Residual error compare to fit curve
MD-403 I2C InterfaceOven Controlled Crystal Oscillator MD-403 The MD-403 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates with an onboard
Package Type: 0 Through Hole Supply Voltage: V V V Logic: HCMOS Sine Wave
Description Q-Tech s High Stability OCXO is a high reliability signal generator that provides an HCMOS or Sine Wave output. The OCXO is available in a Through hole package. A flexible design allows Q-Tech
Logic & Supply Voltage: HC = HCMOS +5V L = LVHCMOS +3.3V P = LVPECL +3.3V
Description Q-Tech s surface-mount QTCV576 VCXOs consist of an IC 5Vdc,.Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic package with gold plated contact
Parameter Conditions & Remarks Min Typical Max Unit. Warm up Steady 25 C Load Output to Ground pf
Model 1380100XXX Features Industry standard 20 x 12.7 mm SMT package Stratum 3E per GR1244CORE 3.3V operation Low Phase Noise Tape and Reel packaging Applications Telecom Switching Wireless Communication
PRELIMINARY. Logic: C = CMOS S = Sine Wave
Description Q-Tech s microcomputer compensated crystal oscillator, MCXO, uses a high stability overtone SC-cut crystal with microprocessor controlled compensation. The self-temperature sensing resonator,
QTCH350LD92-32K768Hz Q T CH 350 L D kHz Drilling, data logging tools Oil service industry High temperature applications
Description The QTCH series are miniature surface-mount (SMD) crystal oscillators supporting.768khz* fundamental mode operating in a wide supply voltage range from.5vdc to.vdc, very low power consumption
VS-800 Ultra-Low Jitter High Frequency VCSO
VS-800 Ultra-Low Jitter High Frequency VCSO VS-800 Description The VS-800 is a Voltage Controlled SAW Oscillator that operates at the fundamental frequency of the internal SAW resonator. The SAW resonator
Low Power (na Current Consumption) KHz ME831, ME832, ME833, ME834 Series
Features: ME83x is a 32.768 KHz CMOS output TCXO with a maximum frequency stability of ± 5 ppm (± 2.62 minutes / year) over -0 to +85 C, much better time-keeping accuracy than the competition. A proprietary
Dynamic Engineers Inc.
Features and Benefits Standard and custom frequencies up to 2100 MHz Femto-second (f sec.) RMS phase jitter Short lead time Typical Applications Low noise synthesizer VCO reference Optical Communication
O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM)
O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM) Rev C The DFRM consists of 2 Ultra Low Phase Noise OCXO at 10 MHz and 100 MHz. The module is packaged
VCC1 VCC1. CMOS Crystal Oscillator. Description. Features. Applications. Block Diagram. Output V DD GND E/D. Crystal. Oscillator
CC1 CMOS Crystal Oscillator CC1 Description ectron s CC1 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The CC1 uses a fundamental or 3rd overtone crystal resulting
MX-041 Oven Controlled Crystal Oscillator
MX-041 Oven Controlled Crystal Oscillator MX-041 Features Applications SC-Cut resonator Frequency Range: 5 MHZ to 20 MHZ Low Package Height Temperature stability to 0.4 Aging rate 0.1 /day Frequency range
Performance Specifications
TX-502 Temperature Compensated Crystal Oscillator High Precision TX-502 Features High Precision TCXO OCXO Replacement OCXO Temperature Performance Low power consumption Tight Tolerances Frequency range
EMI Reduction Spread Spectrum Clock Oscillators 3HM572 Series Group R
The most efficient way to reduce EMI (Electromagnetic Interference) is to reduce it from its principle source the clock oscillator. Mercury 3HM572, an integrated clock module composed of a spread spectrum
CMOS, Ultra-low Jitter Voltage Controlled Crystal Oscillators (VCXOs)
GTJF538 series (5.0x3.2x1.4 mm, 8 pads), a member of Mercury QuikXO quick-turn Voltage Controlled Crystal Oscillators 9VCXOs), features CMOS output and femtosecond (f. sec.) RMS phase jitter (163 f. sec.
VS-708 Single Frequency VCSO
VS-708 Single Frequency VCSO VS-708 Description The VS-708 is a Voltage Controlled SAW Oscillator that operates at the fundamental or a fraction of the internal SAW filter frequency. The SAW component
FTTC15 Series CMOS/Clipped sinewave Output TCXO/VCTCXO. FOR SPACE APPLICATIONS 2M Hz to 100 MHz. ( 7x5 mm, 3.3 V )
REV LTR DESCRIPTION DATE APPVD. - Orig. Release 01/16/10 JSN A Revised per ECN 2012-1 11/09/12 JSN B Revised per ECN 2014-1 03/26/14 JSN C Revised per ECN 2016-2 10/21/16 JSN FTTC15 Series CMOS/Clipped
OX-171 Oven Controlled Crystal Oscillator
OX-171 Oven Controlled Crystal Oscillator OX-171 The OX-171 is a high stability ovenized crystal oscillator in a 28 x 38 mm package, capable of aging rates of 0.06 /day and temperature stabilities of 1
MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator
MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator 2 MD-173 The MD-173 is a Microsemi Coefficient Oscillator (CCXO) that contains a high-stability ovenized crystal
VV-701 Voltage Controlled Crystal Oscillator Previous Vectron Model VVC1/VVC2
-701 oltage Controlled Crystal Oscillator Previous ectron Model C1/C2-701 Description ectron s -701 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator with a CMOS output.
Logic & Supply Voltage: HC = HCMOS +5V L = LVHCMOS +3.3V P = LVPECL +3.3V
. and 5.0Vdc -.000MHz to 56.2MHz Description Q-Tech s surface-mount QTCV56 VCXOs consist of an IC 5Vdc,.Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, CA Phone (800) , (626) Fax: (626)
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, CA 91731 Phone (800) 423-4578, (626) 443-2121 Fax: (626) 443-9049 About Standard Crystal Corporation The company has been in business since
HELLAS INDUSTRIES. for custom designs since 1980 in. Custom RF Filter & Frequency Control Solutions. Defence Avionics Medical Telecom
HELLAS Custom RF Filter & Control Solutions The Choice for custom designs since 1980 in Monolithic Crystal Filters Discrete Crystal Filters LC Filters Switch Filter assemblies Oscillators INDUSTRIES Defence
Parameter Conditions & Remarks Min Typical Max Unit C 3.3V V Warm up 2.5 Steady 25 C 1.
Model 1190100XXX Features Industry standard 25.4 x 22 mm SMT package Stratum 3E per GR1244Core and CR253Core 3.3V or 5.0V operation Low Phase Noise Tape and Reel packaging Applications Telecom Switching
VX-990 Voltage Controlled Crystal Oscillator Ultra Low Noise and G-Sensitivity
VX-990 Voltage Controlled Crystal Oscillator Ultra Low Noise and G-Sensitivity VX-990 Ultra low Phase Noise Ultra low G-Sensitivity Vibration hardened Tight Tolerances Frequency Range Standard Frequency
VC-711 Differential (LVPECL, LVDS) Crystal Oscillator
C-7 Differential (LPECL, LDS) Crystal Oscillator C-7 Description ectron s C-7 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off either a 2.5 or 3.3 volt power supply
Solder Dip Option: T = Standard S = Solder Dip (*) G = Solder Dip (*) Package
Description Q-Tech s surface mount 5 X 7 mm oscillator series consist of an IC 5Vdc, 3.3Vdc, 2.5Vdc, 1.8Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic
RFPT Specifications. The CHARON is a SPI controlled high accuracy TCXO with embedded timer and alarm function. Product description
RFPT200 -- The CHARON is a SPI controlled high accuracy TCXO with embedded timer and alarm function. -- -- The Charon is a high stability 7x5 SMD Digitally Controlled Temperature Controlled Crystal Oscillator
Excellent Integrated System Limited
Excellent Integrated System Limited Stocking Distributor Click to view price, real time Inventory, Delivery & Lifecycle Information: Abracon Corporation AST3TQ-T-10.000MHZ-50-C For any questions, you can
TGV2561-SM GHz VCO with Divide by 2
GND RFout / 2 Vtune TGV2561-SM Applications Point to Point Radio / VSAT Millimeter-wave Communications Test Equipment 32-pin 5x5mm package Product Features Functional Block Diagram Frequency range: 8.9
VX-705 Voltage Controlled Crystal Oscillator
X-705 oltage Controlled Crystal Oscillator X-705 Description The X-705 is a oltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
CLEARCLOCK POWER OPTIMIZED 0.12ps 5x7mm XO
FEATURES APPLICATIONS 0.125ps typ jitter (150fs MAX f > 200MHz, 25 C) Highest in-class frequency range from 50 to 2100MHz Excellent spurious suppresion 70mA MAX IDD (, any VDD) Lowest in-class power consumption
VX-805 Voltage Controlled Crystal Oscillator
VX-805 Voltage Controlled Crystal Oscillator VX-805 Description The VX-805 is a Voltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
VFH230C Series XO Low Jitter 3.3V 5x7mm SMD, LVPECL / LVDS
5x7mm SMD, LV / Features 750kHz to 800MHz frequency range
PS-701 SAW Oscillator
PS-701 SAW Oscillator PS-701 The PS-701 SO (Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support high speed data converters and 100G / 400G coherent optical
VC-820 CMOS Crystal Oscillator
C-20 CMOS Crystal Oscillator C-20 ectron s C-20 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The C-20 uses a fundamental or a 3rd overtone crystal, oscillating
Wave Form: Square x 20.2 x 5.88H [0.504 x x 0.231] G8 500 khz ~ 170 MHz 4 pin DIL half size
![Wave Form: Square x 20.2 x 5.88H [0.504 x x 0.231] G8 500 khz ~ 170 MHz 4 pin DIL half size](/thumbs/91/106537005.jpg "Wave Form: Square x 20.2 x 5.88H [0.504 x x 0.231] G8 500 khz ~ 170 MHz 4 pin DIL half size")
V C X O G series What is a VCXO? Logic: TTL / CMOS Wave Form: Square MERCURY Since 1973 Unlike regular clock oscillator which has fixed output frequency, the output frequency of a VCXO (also known as frequency
EP15E7 D 2 H M TR. Pin 1 Connection Tri-State
eries Quartz Crystal Clock Oscillators XO (PXO) LVCMO (CMO) 2.5Vdc 4 Pad 2.5mm x 3.2mm Ceramic urface Mount (MD) Frequency Tolerance/tability ±50ppm Maximum over -20 C to +70 C ELECTRICAL PECIFICATION