T C X O and Logic: TTL / HCMOS V C T C X O Wave Form: Square Wave
|
|
|
- Roderick Day
- 5 years ago
- Views:
Transcription
1 T C X O and Logic: TTL / HCMOS V C T C X O Wave Form: Square Wave Product Summary: SQUARE MERCURY Since 1973 TCXO VCTCXO Available Frequency Range Output Wave Form: Square Wave Package size (mm), L x W x Seated height Package size (inches), L x W x Seated height Thru-Hole Types M38T VM38T 1.2 ~ 156 MHz 4 pin DIP 11.7 x 18.4 x 7.3 [0.460 x x 0.287] M39T VM39T 1.2 ~ 156 MHz 4 pin DIP 11.7 x 18.3 x 4.7 [0.460 x x 0.185] M14T VM14T 1.2 ~ 156 MHz 4 pin DIP. Hermetically sealed x 20.2 x 8.3 [0.504 x x 0.327] M15T VM15T 1.2 ~ 156 MHz 4 pin DIP. With trimmer 12.8 x 20.2 x 8.3 [0.504 x x 0.327] M8T VM8T 1.2 ~ 156 MHz 4 pin DIP. Half size. Hermetically sealed x 12.8 x 8.3 [0.504 x x 0.327] M9T VM9T 1.2 ~ 156 MHz 4 pin DIP. Half size. With trimmer x 12.8 x 8.3 [0.504 x x 0.327] M19T VM19T 1.2 ~ 156 MHz 5 pin DIP 19.8 x 19.8 x 10.0 [0.780 x x 0.394] Gull Wing Surface Mount Types M55T VM55T 1.2 ~ 156 MHz 4 pin gull wing 11.7 x 21.3 x 6.6 [0.460 x x 0.260] M47T VM19T 1.2 ~ 156 MHz 4 pin gull wing 11.7 x 21.3 x 4.7 [0.460 x x 0.185] M24T VM24T 1.2 ~ 156 MHz 4 pin gull wing. Hermetically sealed x 20.2 x 9.3 [0.504 x x 0.366] M25T VM25T 1.2 ~ 156 MHz 4 pin gull wing. With trimmer x 20.2 x 9.3 [0.504 x x 0.366] M28T VM28T 1.2 ~ 156 MHz 4 pin gull wing. Half size. Hermetically sealed x 12.8 x 9.3 [0.504 x x 0.366] M29T VM29T 1.2 ~ 156 MHz 4 pin Gull wing. Half size. With trimmer x 12.8 x 9.3 [0.504 x x 0.366] Leadless Surface Mount Types M62T VM62T 1.2 ~ 156 MHz 6 pad FR4 base. 2.5 mm H 9.6 x 11.4 x 2.5 [0.378 x x 0.098] M42T VM42T 1.2 ~ 156 MHz 4 pad FR4 base. 2.5mm H 9.6 x 11.4 x 2.5 [0.378 x x 0.098] M64T VM64T 1.2 ~ 156 MHz 6 pad FR4 base. 4.7 mm H 9.6 x 11.4 x 4.7 [0.378 x x 0.185] M44T VM44T 1.2 ~ 156 MHz 4 pad FR4 base. 4.7 mm H 9.6 x 11.4 x 4.7 [0.378 x x 0.185] M575T VM575T 1.2 ~ 156 MHz 4 pad epoxy module base 5 x7.5 x 3.3 [0.197 x x 0.130] M63T VM63T In development 4 pad epoxy module base 6 x3.5 x 3.1 [0.236 x x 0.122] M53T VM53T In development 4 pad epoxy module base 5 x3.2 x 2.9 [0.197 x x 0.114] Note: Mechanical frequency tuning by built-in internal trimmer is standard for all models except for models M575T, VM575T, M63T, VM63T, M53T and VM53T. Please specify when ordering if trimmer is not required. Note: Because cleaning agent normally degrades the trimmer in the non-hermetically sealed packages, cleaning through washing cycles is not recommended. If cleaning is mandatory please choose hermetically sealed packages or no-trimmer option. MERCURY Taiwan: TEL (886) , FAX (886) , sales-tw@mercury-crystal.com U.S.A.: TEL (1) , FAX (1) , sales-us@mercury-crystal.com MERCURY Page 1 of 8 Date: Dec. 1, 2001 Rev. 0
2 T C X O and Logic: TTL / HCMOS V C T C X O Wave Form: Square Wave MERCURY Since 1973 General Specifications (at+25 C and specified input voltage) Frequency Range Output Wave From Initial Calibration Tolerance Standard Frequencies (partial list) Frequency Stability vs Temperature vs Aging vs Voltage Change vs Load Change vs reflow (SMD models) Typical Operating Temperature Range (examples) Mechanical Frequency Tuning 1.2 MHz ~ MHz (package dependent) Square wave. Wave form code is T Models with mechanical trimmer: Adjustable to the nominal frequency Models without mechanical trimmer: ±3 ppm at +25 C 9.6, 10.0, 12.8, 13.0, 14.4, 15.36, , 19.2, , MHz ±1 ppm, ±1.5 ppm, ±2.0 ppm, ±2.5 ppm, ±3 ppm, ±5 ppm, or ±10 ppm over specified operating temperature range ±1.0 ppm max. first year at +25 C ±0.3 ppm max. for a ±5% input voltage change ±0.3 ppm max. for a ±10% loading condition change ±1 ppm max. 1 reflow and measured 24 hours afterwards 0 C to +60 C 0 C to +70 C -10 C to +60 C -20 C to +70 C -30 C to +60 C -30 C to +75 C ±5 ppm stability for -40 C to +85 C ±3 ppm min. (from built-in trimming capacitor) Input Voltage Range (V DD ) Logic +3.0V (voltage code is 3 ) +5.0V (voltage code is 5 ) Output Voltage Level Logic High 1 T T L 2.4V min. 2.4V min. HCMOS 90% V DD min. 90% V DD min. T T L 0.4V max. 0.4V max. Logic Low 0 HCMOS 10% V DD max. 10% V DD max. Rise Time and Fall Time T T L 10 nano. sec. max. from 0.5 V to 2.4V HCMOS 10 nano. sec. max. 20% 80% of waveform Duty Cycle (Symmetry) T T L 50%±10% measured at +1.4V D.C. HCMOS 50%±10% measured at 50% V DD Start-up Time 10 m. sec. max. Enable / Disable Option Output Enable. Tri-states output when low. Internal pull-up. Note: Available in certain models only and TCXO products only. Current Consumption 25 ma max. 30 ma max. V C T C X O o n l y Electrical Frequency Tuning (from voltage control pin) ±5~±12 ppm for +1.5 V±1.5V ±6~±12 ppm for +2.5 V±2.0 V (up to ±100 ppm is also available for some of the packages) Slope Polarity Positive: Increasing control voltage increases output frequency. Negative slope is also available Linearity 10 % max. Output Load 15 pf SSB Phase Offset 10 Hz 100 Hz 1 khz 10 khz 100 khz Noise at +25 C M38T dbc/hz -110 dbc/hz -130 dbc/hz -140 dbc/hz -145 dbc/hz Output Format Storage Temperature AC block, DC coupled -40 C to +85 C Note : TCXO products ordered without mechanical and electrical frequency tuning should have a frequency tolerance of ±3 ppm (at +25 C) and the frequency stability over temperature will be from that measured value. MERCURY Page 2 of 8 Date: Dec. 1, 2001 Rev. 0
3 T C X O and Logic: TTL / HCMOS V C T C X O Wave Form: Square Wave MERCURY Since 1973 Part Number Format and Examples: Package Code 3 for +3.0 V Frequency Stability 5 for +5.0V in ± ppm _ or V M T Input Voltage Frequency Stability Temperature Range Blank for TCXO Wave Form Code Nominal Frequency Operating Temp. V for VCTCXO T for square wave in MHz Range in C M44T / VM14T / represents MHz TCXO in M44 package with stability of ±1 ppm from 20 C to +70 C, TTL/CMOS square wave output, +5.0V input voltage. represents 13.0 MHz VCTCXO in M14 package with stability of ±2.5 ppm from 30 C to +75 C, TTL/CMOS square wave output, +3.0 V input voltage. Output Wave Form Phase Noise M38T Ground TTL / CMOS Square Wave TCXO (VCTCXO) Test Circuit: dbc/hz Hz 100 Hz 1 khz 10 khz offset Oscilloscope Vcc 14 8 SUPPLY VOLTAGE + 1 Top view 7 A V uf 15 pf * Frequency counter * Include all the proble and stray capacitances CONTROL VOLTAGE MERCURY Page 3 of 9 Date: Dec. 1, 2001 Rev. 0
4
5
6
7
8
O C X O Oven Controlled Crystal Oscillators
What is an OCXO? Relatively speaking, an OCXO performs in the ±0.01~±0.1 ppm range, a TCXO performs in the ±1~±3 ppm range while a non-compensated clock oscillator performs in the ±25, ±50 ppm range. A
Wave Form: Square x 20.2 x 5.88H [0.504 x x 0.231] G8 500 khz ~ 170 MHz 4 pin DIL half size
![Wave Form: Square x 20.2 x 5.88H [0.504 x x 0.231] G8 500 khz ~ 170 MHz 4 pin DIL half size](/thumbs/91/106537005.jpg "Wave Form: Square x 20.2 x 5.88H [0.504 x x 0.231] G8 500 khz ~ 170 MHz 4 pin DIL half size")
V C X O G series What is a VCXO? Logic: TTL / CMOS Wave Form: Square MERCURY Since 1973 Unlike regular clock oscillator which has fixed output frequency, the output frequency of a VCXO (also known as frequency
A DROP-IN REPLACEMENT SOLUTION FOR YOUR EMI / EMC COMPLIANCE PROBLEM
3HM57 Group R A DROP-IN REPLACEMENT SOLUTION FOR YOUR EMI / EMC COMPLIANCE PROBLEM The principle sources of the EMI problem come from the system clocks. Therefore, rather than patch the problem with ferrite
Low Power (na Current Consumption) KHz ME831, ME832, ME833, ME834 Series
Features: ME83x is a 32.768 KHz CMOS output TCXO with a maximum frequency stability of ± 5 ppm (± 2.62 minutes / year) over -0 to +85 C, much better time-keeping accuracy than the competition. A proprietary
2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Nominal frequency range
CFPT9000 -- SMD Temperature Compensated Crystal Oscillator (PLUTO) -- -- A series of surface mountable 7.0x5.0mm Temperature Compensated Voltage Controlled Crystal Oscillators (TCVCXOs) for medium to high
EMI Reduction Spread Spectrum Clock Oscillators 3HM572 Series Group R
The most efficient way to reduce EMI (Electromagnetic Interference) is to reduce it from its principle source the clock oscillator. Mercury 3HM572, an integrated clock module composed of a spread spectrum
QTCT570 SERIES 5 x 7mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to MHz Description
Description Q-Tech s surface-mount QTCT570 oscillators consist of an IC 2.8Vdc, 3.3Vdc clock TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range
VT-802 VT-802. Temperature Compensated Crystal Oscillator. Description
T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,
QTCT350 SERIES 3.2 x 5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 5.0Vdc MHz to 52.
Description Q-Tech s surface-mount QTCT350 oscillators consist of an IC 3.3Vdc, 5.0Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, CA Phone (800) , (626) Fax: (626)
Standard Crystal Corporation 9940 E. Baldwin Place, El Monte, CA 91731 Phone (800) 423-4578, (626) 443-2121 Fax: (626) 443-9049 About Standard Crystal Corporation The company has been in business since
Frequency Shift Keyed Silicon Oscillators FH32 and FH53 Series
The FH series is an extremely low power precision Frequency shift keyed silicon oscillator with a total frequency error less than 1.0%. This Si-gate CMOS oscillator produces a square wave output and requires
VVC4 Voltage Controlled Crystal Oscillator
C4 oltage Controlled Crystal Oscillator Features ectron s Smallest CXO, 5.0 X 3.2 X 1.2 mm High Frequencies to 77.70 MHz 5.0 or 3.3 operation Linearity 10% Tri-State Output for testing Low jitter < 1ps
VT-501 Temperature Compensated Crystal Oscillator Previous Vectron Model VTD3
T-501 Temperature Compensated Crystal Oscillator Previous ectron Model TD3 T-501 Description ectron s T-501 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog
PARAMETER SYMBOL CONDITIONS VALUE UNIT
Page 1 of 6 FEATURES APPLICATIONS ±0.28 ppm Holdover Stability Mobile Phones ±4.6 ppm accuracy over all conditions Base Stations including 20 years aging Mobile Radios Miniature 5x7 mm SMD GPS Devices
Rakon Product Proposal
RTX5032A -- SMD Temperature Compensated Crystal Oscillator -- -- High performance TCXO offering excellent Phase Noise, Frequency Stability and VCO tilt compensation. -- Product description -- The RTX5032A
VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator
VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator Features CMOS Square Wave Output Enable Disable Feature Output Frequencies to 30 MHz Fundamental Crystal Design Optional VCXO function
VT-701 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC2
T-701 Temperature Compensated Crystal Oscillator Previous ectron Model TC2 T-701 Description ectron s T-701 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output,
J-Type Voltage Controlled Crystal Oscillator
J-Type Voltage Controlled Crystal Oscillator Product is compliant to RoHS directive and fully compatible with lead free assembly Features Output Frequencies from 1.024 MHz to 170.000 MHz +3.3 or +5.0 volt
RFPT Specifications. The CHARON is a SPI controlled high accuracy TCXO with embedded timer and alarm function. Product description
RFPT200 -- The CHARON is a SPI controlled high accuracy TCXO with embedded timer and alarm function. -- -- The Charon is a high stability 7x5 SMD Digitally Controlled Temperature Controlled Crystal Oscillator
18 SH Product series. Package size. 32 for 3.2x2.5x1.0 mm 53 for 5x3.2x1.2 mm
The SH series is an extremely low power precision silicon oscillator with a total frequency error of less than.0%. This Si-gate CMOS oscillator produces a square wave output and requires no external components
Series T7250-T7258, T9250-T9258, T7001-T7013, T9301-T9313 Extended Temperature/COTS XO, 3.3V
Features 20kHz to 100MHz frequency range 5X7 SMD form factor Hermetically sealed for rugged environmental conditions Extremely wide operating temperature range accommodates harsh environments Crystals
TEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR
TEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR ASTX-12, ASVTX-12 FEATURES: 2.5 X 2.0 X 0.9mm APPLICATIONS: Ultra miniature and low height 0.9mm. Low current consumption 2mA. Vc function
VT-841 VT-841. Temperature Compensated Crystal Oscillator. Description. Applications. Features. Block Diagram. Output V DD.
VT-841 Temperature Compensated Crystal Oscillator VT-841 Description Vectron s VT-841 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output, analog temperature
Rakon Product Proposal
IT2200A -- SMD Temperature Compensated Crystal Oscillators -- -- Low cost SMD TCXO with voltage control option using an analogue IC for compensation. Frequencies ranging from 10MHz to 52MHz. -- Product
TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator
TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator TX-707 The TX-707 Series TCXO combines innovative manufacturing and the latest technology to provide low phase noise and excellent g-sensitivity.
VX-503 Voltage Controlled Crystal Oscillator
VX3 Voltage Controlled Crystal Oscillator VX3 Features Description The VX3 voltage controlled crystal oscillator expands VI s advanced VCXO performance capabilities while adhering to a package footprint
Duty Cycle 50 ±10(%) 0.4Vdc Maximum with TTL Load, 0.5Vdc Maximum with HCMOS Load (IOL = +16mA)
eries RoH Compliant (Pb-free) 5.0V 14 Pin DIP Metal Thru-Hole HCMO/TTL High Frequency Oscillator EH11 20 Frequency Tolerance/tability ±20ppm Maximum Package Operating Temperature Range 0 C to +70 C T -37.872M
T5321 Series T5421 Series 5x7 mm Surface Mount High Reliability Tristate/Non-Tristate, 1MHz to 100MHz
Features Leadless chip carrier package is hermetically sealed for superior aging and field performance Crystal angle controlled to ±1 minute for excellent temperature stability 168 hour Class B burn-in
VT-860 Temperature Compensated Crystal Oscillator
VT-860 Temperature Compensated Crystal Oscillator VT-860 Description Vectron s VT-860 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, Clipped sine wave output, analog temperature
V-Type Voltage Controlled Crystal Oscillator (VCXO)
Product Data Sheet V-Type Voltage Controlled Crystal Oscillator (VCXO) Features Output Frequencies to 77.760 MHz 5.0 or 3.3 volt operation Tri-State Output Jitter Performance 12MHz) VCXO
This bulletin is to notify all customers of the termination of the following Ecliptek series effective March 1 st, 2002:
Marketing Bulletin DATE: March 6, 2003 TO: FROM: RE: Affected Customers Mark Stoner Product Termination To all concerned parties, This bulletin is to notify all customers of the termination of the following
VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1., 2.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 125 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
Preliminary Rev. M Accusilicon AS318-B Series Professional Audiophile Crystal Oscillator
Accusilicon AS318-B Series Professional Audiophile Crystal Oscillator Features Extremely low close-in phase noise, designed for professional Audiophile & Recording application. Typical -100dBc @ 10Hz at
T5621 Series T5721 Series 5x7 mm Surface Mount High Reliability Tristate/Non-Tristate, 16kHz to 100MHz
Features Leadless chip carrier package is hermetically sealed for superior aging and field performance Crystal angle controlled to ±1 minute for excellent temperature stability 168 hour Class B burn-in
VC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
OD100LP-Series Low Phase Noise
OD100LP-Series Low Phase Noise VCOCXO1 Description: The Connor-Winfield OD100LP-series is a low phase noise VCOCXO in a 1x1 inch metal package. The OD100LP-series is designed for those applications that
VVC1 VVC2 Voltage Controlled Crystal Oscillator
VVC1 VVC2 Voltage Controlled Crystal Oscillator Features The VVC1 Voltage Controlled Crystal Oscillator VCXO with a CMOS output Small 5.0 X 7.0 X 1.9 mm package Output frequencies to 66 MHz 5.0 or 3.3
VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4
VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4 VT-800 Description Vectron s VT-800 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine
VFH2321-VFH2324 VFH2421-VFH2424 XO Hi-REL, 1.8V 5x7mm SMD, HCMOS
Features Leadless chip carrier package is hermetically sealed for superior aging and field performance Crystal angle controlled to ±0.5 minute for excellent temperature stability 168 hour Class B burn-in
Performance Specifications
TX-502 Temperature Compensated Crystal Oscillator High Precision TX-502 Features High Precision TCXO OCXO Replacement OCXO Temperature Performance Low power consumption Tight Tolerances Frequency range
VC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
RoHS EV32C3 A 3 A M
RoH Pb EV32C3 A 3 A 1-27.000M eries RoH Compliant (Pb-free) 3.3V 6 Pad 5mm x 7mm Ceramic MD LVCMO/TTL VCXO (Tri-tate Pad 5) Operating Temperature Range 0 C to +70 C Absolute Pull Range ±50ppm Minimum Nominal
VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator
VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator Features CMOS output Output frequencies to 168 MHz Tri-state output for board test and debug -10/70 or 40/85 C operating temperature Gold over nickel
O C X O (Oven Controlled Crystal Oscillators) Product Selection Guide
Product Summary: OC14 Series OC14G Series RoHS Compliant 4 pin DIP W: 13.2 mm H: 10.5 mm OC24 Series W: 13.2 mm H: 12.0 mm +3.3 V Sine Wave model OC14T12A OC14T12GA OC14E12A OC14E12GA 0 C ~+60 C ±0.05
VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator
VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator Features Clipped Sine Wave Output Output Frequencies to 27 MHz Fundamental Crystal Design Optional VCXO Function available Gold
VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator
VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator Features 2.5 or 3.3 V LVDS 3rd Overtone Crystal for best jitter performance Output frequencies to 270 MHz Low Jitter < 1 ps rms, 12kHz to 20MHz Enable/Disable output
Lead Finish: T = Standard S = Solder Dip (**) Package Type: 0 = DIP-14 1 = SMD 2 = Gull Wing Supply Voltage: 3 = +3.3V 5 = +5.0V
Description The Q-Tech Analog TCXO encompasses state-of-the-art oscillators with low phase noise, jitter, and tight temperature stability. The TCXO is available in a DIP (QT3003), SMD (QT3013) or Gull
VC-711 Differential (LVPECL, LVDS) Crystal Oscillator
C-7 Differential (LPECL, LDS) Crystal Oscillator C-7 Description ectron s C-7 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off either a 2.5 or 3.3 volt power supply
VV-701 Voltage Controlled Crystal Oscillator Previous Vectron Model VVC1/VVC2
-701 oltage Controlled Crystal Oscillator Previous ectron Model C1/C2-701 Description ectron s -701 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator with a CMOS output.
CMOS/LVCMOS HF VCXO AE-X32BXX-X Series
CMOS/LVCMOS HF VCXO Description The AE-X32BXX Series of voltage controlled crystal oscillators (VCXO) provides high frequency with CMOS/LVCMOS output. The device does not use any frequency multiplication,
TX-801 Temperature Compensated Crystal Oscillator
TX-801 Temperature Compensated Crystal Oscillator TX-801 Features Applications The TX-801 TCXO provides fully compliant Stratum 3 levels of stability in a 5x3.2mm package. It is ideal for timing over IP
TX-705 Temperature Compensated Crystal Oscillator
TX-705 Temperature Compensated Crystal Oscillator TX-705 Features Applications The TX-705 is a TCXO family designed for applications where superior g-sensitivity and good phase noise together with small
TX-500 Temperature Compensated Crystal Oscillator
TX-500 Temperature Compensated Crystal Oscillator TX-500 Features Low Phase Noise Low power consumption Output: HCMOS, Clipped Sinewave, PECL, True Sinewave Tight Tolerances Frequency range 1 of 6.4-160
PX-421 Crystal Oscillator
PX-421 Crystal Oscillator PX-421 PX-421 PX-421 PX-421 Features Frequency: 10 KHz to 125 MHz 4 Pin 1/2 DIP Package with Through Hole and SMD lead optio Fully RoHS Compliant * No pure tin is used in this
VX-703 Data Sheet VX-703. Voltage Controlled Crystal Oscillator Previous Vectron Model V-Type. Description. Features. Applications.
X-703 Data Sheet oltage Controlled Crystal Oscillator Previous ectron Model -Type X-703 Description ectron s X-703 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator
RFPT Specifications. SMD Low Acceleration Sensitivity TCXO / TCVCXO. Product description. Applications
RFPT705 -- SMD Low Acceleration Sensitivity TCXO / TCVCXO. -- -- A series of surface mountable Temperature Compensated Voltage Controlled Crystal Oscillators (TCVCXO) for applications where phase noise
3.000 MHz MHz. Cat. No.
LOW-PROFILE MICROPROCESSOR CRYSTALS LEADED VERSION MICROPROCESSOR CRYSTALS SPECIFICATIONS Nominal Frequency Frequency Tolerance at 25 C Frequency Stability over temperature 20 C to +70 C Aging Shunt Capacitance
VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1.,.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 15 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
P113SD Series 2.5 V CMOS Clock Oscillators
Pletronics P113SD Series is a quartz crystal controlled precision square wave generator with a CMOS output. The P113SD series will directly interface TTL devices also. Greatly reduces RFI and EMI system
Performance Specifications
OX-208 Oven Controlled Crystal Oscillator OX-208 OX-208 The OX-208 is a high stability ovenized crystal oscillator in a 25 x 25 mm package, capable of aging rates of 0.15 /day and temperature stabilities
MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator
MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator 2 MD-173 The MD-173 is a Microsemi Coefficient Oscillator (CCXO) that contains a high-stability ovenized crystal
VT-840 VT-840. Temperature Compensated Crystal Oscillator, Voltage Controlled Temperature Compensated Crystal Oscillator.
VT-840 Temperature Compensated Crystal Oscillator, Voltage Controlled Temperature Compensated Crystal Oscillator VT-840 Description Vectron s VT-840 Temperature Compensated Crystal Oscillator (TCXO) is
QTCT220 SERIES 2.0 x 2.5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to 52.
5PeNdTbfTaY Q-Tech s surface-mount QTCT220 oscillators consist of an IC 3.3Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from 10.000MHz
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-55310/30B 13 June 2005 SUPERSEDING MIL-PRF-55310/30A 19 October 2004 PERFORMANCE SPECIFICATION SHEET OSCILLATOR, CRYSTAL CONTROLLED, TYPE 1 (CRYSTAL OSCILLATOR (XO)), 450 khz THROUGH
VX-705 Voltage Controlled Crystal Oscillator
X-705 oltage Controlled Crystal Oscillator X-705 Description The X-705 is a oltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
OX-400 / OX 401 Oven Controlled Crystal Oscillator
OX-400 / OX 401 Oven Controlled Crystal Oscillator OX-400 / 401 Features 4-Pin Dip Fast warm-up TCXO replacement for better short term stability Frequency Range, 10 MHz to 40 MHz Standard frequencies,
VX-805 Voltage Controlled Crystal Oscillator
VX-805 Voltage Controlled Crystal Oscillator VX-805 Description The VX-805 is a Voltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
Parameter Conditions & Remarks Min Typical Max Unit. Warm up Steady 25 C Load Output to Ground pf
Model 1380100XXX Features Industry standard 20 x 12.7 mm SMT package Stratum 3E per GR1244CORE 3.3V operation Low Phase Noise Tape and Reel packaging Applications Telecom Switching Wireless Communication
CXOQ CXOQ 1.8V CXOQ 2.5V CXOQ 3.0V CXOQ 3.3V
CXOQ Statek s ultra miniature and ultra low profile CXOQ oscillators consist of a CMOS/TTL compatible hybrid circuit and a state-ofthe-art, miniature, fundamental-mode crystal. Model Name Description CXOQ
OX-171 Oven Controlled Crystal Oscillator
OX-171 Oven Controlled Crystal Oscillator OX-171 The OX-171 is a high stability ovenized crystal oscillator in a 28 x 38 mm package, capable of aging rates of 0.06 /day and temperature stabilities of 1
QTCH350LD92-32K768Hz Q T CH 350 L D kHz Drilling, data logging tools Oil service industry High temperature applications
Description The QTCH series are miniature surface-mount (SMD) crystal oscillators supporting.768khz* fundamental mode operating in a wide supply voltage range from.5vdc to.vdc, very low power consumption
HIGH FREQUENCY, LOW JITTER CLOCK OSCILLATOR
DESCRIPTION FEATURES + The XCO clock series is a cutting edge family of low to high frequency, low jitter output, single or multi - frequency clock oscillators. The XCO clocks are available in 7.0 x 5.0,
DISCONTINUED. SQ33D Series 5.0 V CMOS Clock Oscillators
Pletronics SQ33D Series is a quartz crystal controlled precision square wave generator with a CMOS output. The SQ33D series will directly interface TTL devices also. Greatly reduces RFI and EMI system
Performance Specifications
OX-280 Oven Controlled Crystal Oscillator OX-280 Features Surface Mount Package AT-CUT and SC_CUT Crystal Options Low Profile Compact Package Compact Package Applications Base stations Test equipment Synthesizers
VCA1 series 3.3, 5.0 volt CMOS Oscillator
CA1 series 3.3, 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 160 MHz Tristate output for board test and debug 0/70 or 40/85 C operating temperature Product is compliant to RoHS directive
Other Options Available For An Additional Charge Hot Solder Dip Sn60/Pb40 per MIL-PRF Specifications subject to change without prior notice.
6QeOdUbfUaZ Q-Tech s surface-mount QTCC570 oscillators consist of an IC 5Vdc, 3.3Vdc, 2.5Vdc, and.8vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 The VS-701 VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
C
Typical Applications Base Stations Test Equipment Synthesizers Digital Switching Features Surface Mount Package Optional Reflow Process Compatible Optional AT-Cut and SC-Cut Crystal Options Low Profile
O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM)
O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM) Rev C The DFRM consists of 2 Ultra Low Phase Noise OCXO at 10 MHz and 100 MHz. The module is packaged
Typical Applications Satellite and Deep Space Radiation Tolerance Required Severe Environmental Conditions. 10 MHz 40 MHz 10, 20 MHz
EX-209 Hi-Reliability Evacuated Miniature Crystal Oscillator EX-209 Features 16 pin Double Dip Package Ruggedized hybrid thick film construction Low Power Consumption Legacy Model: EX-245 Typical Applications
IQXT IQXT is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package.
IQXT-205-2 IQXT-205-2 is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package. Model Name IQXT-205-2-18 IQXT-205-2-25 IQXT-205-2-28
OX-200 Oven Controlled Crystal Oscillator
OX-200 Oven Controlled Crystal Oscillator OX-200 Features Reflow Process Compatible AT-Cut and SC-Cut Crystal Options Low Profile Compact Package Applications Base Stations Test Equipment Synthesizers
CARDINAL COMPONENTS. Operating Conditions: Description Min Max Unit
Standard Package Options Series CPP Part Numbering Example: CPP C 1 L Z - A5 B6 - XXXXXX TS CPP C 1 L Z A5 SERIES CPP OUTPUT C = CMOS T = TTL Specifications: PACKAGE STYLE 1 = Full Size 4 = Half Size 5
STRATUM 3E High Stability Oven Stabilized Oscillator OH300 Series OCXO / VCOCXO
Available at Digi-Key** www.digikey.com STRATUM 3E High Stability Oven Stabilized Oscillator OH300 Series OCXO / VCOCXO US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Description Connor-Winfield
Description. Block Diagrams. Figure 1b. Crystal-Based Multiplier w/saw
C-501 oltage Controlled Crystal Oscillator C-501 Description The C-501 is a voltage controlled crystal oscillator that is housed in a hermetic 14.0 x 9.0 x 4.5mm ceramic package. Depending upon the frequency
HT RTCXO High Temperature Low Power Real Time Clock Crystal Oscillators
HT RTCXO High Temperature Low Power Real Time Clock Crystal Oscillators PX-702 PX-570 PX-420 Vectron offers a High Temperature Low Power Real Time Clock Crystal Oscillator (HT RTCXO) product platform's
Solder Dip Option: T = Standard S = Solder Dip (*) Package: 81 = Thru-Hole 82 = Formed Lead 83 = Gull Wing
Description Q-Tech s surface mount 7 x 5 mm oscillator series consist of an IC 5Vdc, 3.3Vdc, 2.5Vdc, 1.8Vdc clock square wave generator and a miniature stripat quartz crystal built in a low profile ceramic
VC-801 CMOS Crystal Oscillator Previous Vectron Model VCC4
C-01 CMOS Crystal Oscillator Previous ectron Model CC4 C-01 ectron s C-01 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The C-01 uses fundamental or 3rd overtone
Performance Specifications. Frequency Stabilities 1 ( 10 & 20 MHz)
MD-223 I 2 C Interface Oven Controlled Crystal Oscillator Preleminary version MD-223 The MD-223 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates
MX-041 Oven Controlled Crystal Oscillator
MX-041 Oven Controlled Crystal Oscillator MX-041 Features Applications SC-Cut resonator Frequency Range: 5 MHZ to 20 MHZ Low Package Height Temperature stability to 0.4 Aging rate 0.1 /day Frequency range
Logic & Supply Voltage: HC = HCMOS +5V L = LVHCMOS +3.3V P = LVPECL +3.3V
Description Q-Tech s surface-mount QTCV576 VCXOs consist of an IC 5Vdc,.Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic package with gold plated contact
VCC1 VCC1. CMOS Crystal Oscillator. Description. Features. Applications. Block Diagram. Output V DD GND E/D. Crystal. Oscillator
CC1 CMOS Crystal Oscillator CC1 Description ectron s CC1 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The CC1 uses a fundamental or 3rd overtone crystal resulting
VX-706 Voltage Controlled Crystal Oscillator
VX-706 Voltage Controlled Crystal Oscillator VX-706 Features AT-Cut Crystal Surface Mount FR4 based package Single layer Reflow Process Compatible Low & Jitter Tight Stabilities Frequency Range 40-300MHz
GSV3 series 1.8, 2.5, 3.3 volt CMOS Oscillator
GS3 series 1., 2.5, 3.3 volt CMOS Oscillator Features GS3 Crystal Oscillator Quick delivery CMOS output 3.2mm x 2.5mm x 1.2 mm Output frequencies to 200.00 MHz Tristate output for board test and debug
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-55310/34C 1 February 2013 SUPERSEDING MIL-PRF-55310/34B 19 April 2010 PERFORMANCE SPECIFICATION SHEET OSCILLATOR, CRYSTAL CONTROLLED, TYPE 1 (CRYSTAL OSCILLATOR (XO)), 500 KHz THROUGH
Product Specifications Approval Sheet
TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com
VC-820 CMOS Crystal Oscillator
C-20 CMOS Crystal Oscillator C-20 ectron s C-20 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The C-20 uses a fundamental or a 3rd overtone crystal, oscillating
VFH230C Series XO Low Jitter 3.3V 5x7mm SMD, LVPECL / LVDS
5x7mm SMD, LV / Features 750kHz to 800MHz frequency range
PRELIMINARY. Logic: C = CMOS S = Sine Wave
Description Q-Tech s microcomputer compensated crystal oscillator, MCXO, uses a high stability overtone SC-cut crystal with microprocessor controlled compensation. The self-temperature sensing resonator,
PERFORMANCE SPECIFICATION SHEET
INCH-POUND 18 December 2017 SUPERSEDING MIL-PRF-55310/30D 15 October 2008 PERFORMANCE SPECIFICATION SHEET OSCILLATOR, CRYSTAL CONTROLLED, TYPE 1 (CRYSTAL OSCILLATOR (XO)), 450 KHz THROUGH 100 MHz, HERMETIC