IQXT IQXT is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package.
|
|
- Doreen Higgins
- 5 years ago
- Views:
Transcription
1 IQXT IQXT is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package. Model Name IQXT IQXT IQXT IQXT IQXT A 1.8V version A 2.5V version A 2.8V version A 3.0V version A 3.3V version IQD Products Ltd Station Road Crewkerne Somerset TA18 8AR United Kingdom Tel: +44 (0) Fax: +44 (0) info@iqdfrequencyproducts.com Registered in England No: VAT Registration No: GB
2 IQXT IQXT is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package. Developed frequencies: 16.2, , , 19.2, 20.0, 24.0, 25.0, 26.0, , , , 30.0, 32.0, 33.6, 38.4, 48.0, 50.0 and 52.0MHz Parameters Tolerance Max Tolerance Condition Stability Ageing 13.0MHz to 52.0MHz 25 C ±2 C ±0.50ppm to ±2.00ppm ±1ppm per 25 C ±3 C Tolerance: Referred to nominal frequency before reflow soldering. ±5% change for ±0.5ppm stability: ±5% change for ±2.0ppm stability: ±0.2ppm Load ±10% change for ±0.5ppm stability: ±10% change for ±2.0ppm stability: ±0.2ppm Short Term Stability (Allan variance): ±1ppb (Tau = 0.1s) IR Reflow Resistance (ref to frequency before reflow): ±1ppm Outline (mm) Electrical Parameters Absolute Maximum Ratings: : -0.6V to 4.6V Control Voltage: -0.6V to Vs+0.6V 1.8V ±5% Adjustment Pulling Control Voltage Slope: Positive ±8ppm min to ±13ppm 0.9V ±0.8V Operating Temperature Ranges -30 to 85 C Output Details Output Compatibility Clipped Sine Drive Capability 10kΩ//10pF Output: DC coupled Output Level: 0.8V pk-pk min Start Up Time (90% of V pk-pk): 2ms Start Up Time (within ±0.5ppm): 2ms Noise Parameters Phase Noise (typ): 1kHz Harmonic Distortion: -5.0dBc Environmental Parameters Storage Temperature Range: -40 to 85 C
3 IQXT Ordering Information *Minimum info required * Model* Output Stability (over operating temperature range)* Operating Temperature Range* Example 20.0MHz IQXT Clipped Sine ±0.5ppm 30 to 85C 1.8V ±8ppm min to ±13ppm Compliance RoHS Status (2011/65/EU) REACh Status MSL Rating (JDEC-STD-033): Not Applicable Packaging Details Pack Style: Cutt Pack Size: 100 Pack Style: Reel Pack Size: 2,000 Cut tape Tape & reel in accordance with EIA-481-D Electrical Specification - imum limiting values 1.8V ±5% Min Max Temperature Range Stability (Min) Current Draw Rise and Fall Time Duty Cycle C ppm ma ns % 13.0MHz MHz -30 to 85 ± MHz MHz -30 to 85 ± MHz 52.0MHz -30 to 85 ±0.5 2 This document was correct at the time of printing; please contact your local sales office for the latest version. Click to view latest version on our website.
4 IQXT IQXT is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package. Developed frequencies: 16.2, , , 19.2, 20.0, 24.0, 25.0, 26.0, , , , 30.0, 32.0, 33.6, 38.4, 48.0, 50.0 and 52.0MHz Parameters Tolerance Max Tolerance Condition Stability Ageing 13.0MHz to 52.0MHz 25 C ±2 C ±0.50ppm to ±2.00ppm ±1ppm per 25 C ±3 C Tolerance: Referred to nominal frequency before reflow soldering. ±5% change for±0.5ppm stability: ±5% change for±2.0ppm stability: ±0.2ppm Load ±10% change for ±0.5ppm stability: ±10% change for ±2.0ppm stability: ±0.2ppm Short Term Stability (Allan variance): ±1ppb (Tau = 0.1s) IR Reflow Resistance (ref to frequency before reflow): ±1ppm Outline (mm) Electrical Parameters Absolute Maximum Ratings: : -0.6V to 4.6V Control Voltage: -0.6V to Vs+0.6V 2.5V ±5% Adjustment Pulling Control Voltage Slope: Positive ±9ppm min to ±15ppm 1.25V ±1.0V Operating Temperature Ranges -30 to 85 C Output Details Output Compatibility Clipped Sine Drive Capability 10kΩ//10pF Output: DC coupled Output Level: 0.8V pk-pk min Start Up Time (90% of V pk-pk): 2ms Start Up Time (within ±0.5ppm): 2ms Noise Parameters Phase Noise (typ): 1kHz Harmonic Distortion: -5.0dBc Environmental Parameters Storage Temperature Range: -40 to 85 C
5 IQXT Ordering Information *Minimum info required * Model* Output Stability (over operating temperature range)* Operating Temperature Range* Example 20.0MHz IQXT Clipped Sine ±0.5ppm 30 to 85C 2.5V ±9ppm min to ±15ppm Compliance RoHS Status (2011/65/EU) REACh Status MSL Rating (JDEC-STD-033): Not Applicable Packaging Details Pack Style: Cutt Pack Size: 100 Pack Style: Reel Pack Size: 2,000 Cut tape Tape & reel in accordance with EIA-481-D Electrical Specification - imum limiting values 2.5V ±5% Min Max Temperature Range Stability (Min) Current Draw Rise and Fall Time Duty Cycle C ppm ma ns % 13.0MHz MHz -30 to 85 ± MHz MHz -30 to 85 ± MHz 52.0MHz -30 to 85 ±0.5 2 This document was correct at the time of printing; please contact your local sales office for the latest version. Click to view latest version on our website.
6 IQXT IQXT is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package. Developed frequencies: 16.2, , , 19.2, 20.0, 24.0, 25.0, 26.0, , , , 30.0, 32.0, 33.6, 38.4, 48.0, 50.0 and 52.0MHz Parameters Tolerance Max Tolerance Condition Stability Ageing 13.0MHz to 52.0MHz 25 C ±2 C ±0.50ppm to ±2.00ppm ±1ppm per 25 C ±3 C Tolerance: Referred to nominal frequency before reflow soldering. ±5% change for±0.5ppm stability: ±5% change for±2.0ppm stability: ±0.2ppm Load ±10% change for ±0.5ppm stability: ±10% change for ±2.0ppm stability: ±0.2ppm Short Term Stability (Allan variance): ±1ppb (Tau = 0.1s) IR Reflow Resistance (ref to frequency before reflow): ±1ppm Outline (mm) Electrical Parameters Absolute Maximum Ratings: : -0.6V to 4.6V Control Voltage: -0.6V to Vs+0.6V 2.8V ±5% Adjustment Pulling Control Voltage Slope: Positive ±9ppm min to ±15ppm 1.4V ±1.0V Operating Temperature Ranges -30 to 85 C Output Details Output Compatibility Clipped Sine Drive Capability 10kΩ//10pF Output: DC coupled Output Level: 0.8V pk-pk min Start Up Time (90% of V pk-pk): 2ms Start Up Time (within ±0.5ppm): 2ms Noise Parameters Phase Noise (typ): 1kHz Harmonic Distortion: -5.0dBc Environmental Parameters Storage Temperature Range: -40 to 85 C
7 IQXT Ordering Information *Minimum info required * Model* Output Stability (over operating temperature range)* Operating Temperature Range* Example 20.0MHz IQXT Clipped Sine ±0.5ppm 30 to 85C 2.8V ±9ppm min to ±15ppm Compliance RoHS Status (2011/65/EU) REACh Status MSL Rating (JDEC-STD-033): Not Applicable Packaging Details Pack Style: Reel Pack Size: 2,000 Pack Style: Cutt Pack Size: 100 Tape & reel in accordance with EIA-481-D Cut tape Electrical Specification - imum limiting values 2.8V ±5% Min Max Temperature Range Stability (Min) Current Draw Rise and Fall Time Duty Cycle C ppm ma ns % 13.0MHz MHz -30 to 85 ± MHz MHz -30 to 85 ± MHz 52.0MHz -30 to 85 ±0.5 2 This document was correct at the time of printing; please contact your local sales office for the latest version. Click to view latest version on our website.
8 IQXT IQXT is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package. Developed frequencies: 16.2, , , 19.2, 20.0, 24.0, 25.0, 26.0, , , , 30.0, 32.0, 33.6, 38.4, 48.0, 50.0 and 52.0MHz Parameters Tolerance Max Tolerance Condition Stability Ageing 13.0MHz to 52.0MHz 25 C ±2 C ±0.50ppm to ±2.00ppm ±1ppm per 25 C ±3 C Tolerance: Referred to nominal frequency before reflow soldering. ±5% change for±0.5ppm stability: ±5% change for±2.0ppm stability: ±0.2ppm Load ±10% change for ±0.5ppm stability: ±10% change for ±2.0ppm stability: ±0.2ppm Short Term Stability (Allan variance): ±1ppb (Tau = 0.1s) IR Reflow Resistance (ref to frequency before reflow): ±1ppm Outline (mm) Electrical Parameters Absolute Maximum Ratings: : -0.6V to 4.6V Control Voltage: -0.6V to Vs+0.6V 3.0V ±5% Adjustment Pulling Control Voltage Slope: Positive ±9ppm min to ±15ppm 1.5V ±1.0V Operating Temperature Ranges -30 to 85 C Output Details Output Compatibility Clipped Sine Drive Capability 10kΩ//10pF Output: DC coupled Output Level: 0.8V pk-pk min Start Up Time (90% of V pk-pk): 2ms Start Up Time (within ±0.5ppm): 2ms Noise Parameters Phase Noise (typ): 1kHz Harmonic Distortion: -5.0dBc Environmental Parameters Storage Temperature Range: -40 to 85 C
9 IQXT Ordering Information *Minimum info required * Model* Output Stability (over operating temperature range)* Operating Temperature Range* Example 20.0MHz IQXT Clipped Sine ±0.5ppm 30 to 85C 3.0V ±9ppm min to ±15ppm Compliance RoHS Status (2011/65/EU) REACh Status MSL Rating (JDEC-STD-033): Not Applicable Packaging Details Pack Style: Cutt Pack Size: 100 Pack Style: Reel Pack Size: 2,000 Cut tape Tape & reel in accordance with EIA-481-D Electrical Specification - imum limiting values 3.0V ±5% Min Max Temperature Range Stability (Min) Current Draw Rise and Fall Time Duty Cycle C ppm ma ns % 13.0MHz MHz -30 to 85 ± MHz MHz -30 to 85 ± MHz 52.0MHz -30 to 85 ±0.5 2 This document was correct at the time of printing; please contact your local sales office for the latest version. Click to view latest version on our website.
10 IQXT IQXT is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package. Developed frequencies: 16.2, , , 19.2, 20.0, 24.0, 25.0, 26.0, , , , 30.0, 32.0, 33.6, 38.4, 48.0, 50.0 and 52.0MHz Parameters Tolerance Max Tolerance Condition Stability Ageing 13.0MHz to 52.0MHz 25 C ±2 C ±0.50ppm to ±2.00ppm ±1ppm per 25 C ±3 C Tolerance: Referred to nominal frequency before reflow soldering. ±5% change for±0.5ppm stability: ±5% change for±2.0ppm stability: ±0.2ppm Load ±10% change for ±0.5ppm stability: ±10% change for ±2.0ppm stability: ±0.2ppm Short Term Stability (Allan variance): ±1ppb (Tau = 0.1s) IR Reflow Resistance (ref to frequency before reflow): ±1ppm Outline (mm) Electrical Parameters Absolute Maximum Ratings: : -0.6V to 4.6V Control Voltage: -0.6V to Vs+0.6V 3.3V ±5% Adjustment Pulling Control Voltage Slope: Positive ±9ppm min to ±15ppm 1.65V ±1.0V Operating Temperature Ranges -30 to 85 C Output Details Output Compatibility Clipped Sine Drive Capability 10kΩ//10pF Output: DC coupled Output Level: 0.8V pk-pk min Start Up Time (90% of V pk-pk): 2ms Start Up Time (within ±0.5ppm): 2ms Noise Parameters Phase Noise (typ): 1kHz Harmonic Distortion: -5.0dBc Environmental Parameters Storage Temperature Range: -40 to 85 C
11 IQXT Ordering Information *Minimum info required * Model* Output Stability (over operating temperature range)* Operating Temperature Range* Example 20.0MHz IQXT Clipped Sine ±0.5ppm 30 to 85C 3.3V ±9ppm min to ±15ppm Compliance RoHS Status (2011/65/EU) REACh Status MSL Rating (JDEC-STD-033): Not Applicable Packaging Details Pack Style: Reel Pack Size: 2,000 Pack Style: Cutt Pack Size: 100 Tape & reel in accordance with EIA-481-D Cut tape Electrical Specification - imum limiting values 3.3V ±5% Min Max Temperature Range Stability (Min) Current Draw Rise and Fall Time Duty Cycle C ppm ma ns % 13.0MHz MHz -30 to 85 ± MHz MHz -30 to 85 ± MHz 52.0MHz -30 to 85 ±0.5 2 This document was correct at the time of printing; please contact your local sales office for the latest version. Click to view latest version on our website. Sales Office Contact Details: UK: +44 (0) Germany: France: USA: info@iqdfrequencyproducts.com Web: Printed on 22 Mar 18 10:10 using Model Data Sheet V Page 11 of 11
IQXT IQXT-205-3
IQXT-205-3 IQXT-205-3 is a 2.0 x 1.6mm SMD Temperature Compensated Crystal Oscillator (TCXO) in a hermetically Model Name IQXT-205-3-18 IQXT-205-3-25 IQXT-205-3-28 IQXT-205-3-30 IQXT-205-3-33 A 1.8V version
More informationCXOLAT CXOLAT 1.8V CXOLAT 2.5V CXOLAT 3.0V CXOLAT 3.3V
CXOLAT he CXOLAT 32.768kHz surface-mount oscillator achieves the low power comparable with a tuning fork design and the fast start-up and tight frequency stability attained by an AT cut crystal design.
More informationCXOQ CXOQ 1.8V CXOQ 2.5V CXOQ 3.0V CXOQ 3.3V
CXOQ Statek s ultra miniature and ultra low profile CXOQ oscillators consist of a CMOS/TTL compatible hybrid circuit and a state-ofthe-art, miniature, fundamental-mode crystal. Model Name Description CXOQ
More informationPerformance Specifications
OX-208 Oven Controlled Crystal Oscillator OX-208 OX-208 The OX-208 is a high stability ovenized crystal oscillator in a 25 x 25 mm package, capable of aging rates of 0.15 /day and temperature stabilities
More informationTEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR
TEMPERATURE COMPENSATED/ VOLTAGE CONTROLLED CRYSTAL OSCILLATOR ASTX-12, ASVTX-12 FEATURES: 2.5 X 2.0 X 0.9mm APPLICATIONS: Ultra miniature and low height 0.9mm. Low current consumption 2mA. Vc function
More informationVT-841 VT-841. Temperature Compensated Crystal Oscillator. Description. Applications. Features. Block Diagram. Output V DD.
VT-841 Temperature Compensated Crystal Oscillator VT-841 Description Vectron s VT-841 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output, analog temperature
More informationVT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4
VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4 VT-800 Description Vectron s VT-800 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine
More informationTX-801 Temperature Compensated Crystal Oscillator
TX-801 Temperature Compensated Crystal Oscillator TX-801 Features Applications The TX-801 TCXO provides fully compliant Stratum 3 levels of stability in a 5x3.2mm package. It is ideal for timing over IP
More information2.0 Absolute Maximum Ratings 1 Parameter Min. Max. Unit.
RFPO45 G.8263 1.0 Specification References a. Rakon part number (Doc ID) M6635LF (514241) b. 25.0MHz MERC 9x7 HOT CMOS 3.3V c. Version 1 (2014-04-01) d. Package 9.7 x 7.5 x 4.3 mm max. 2.0 Absolute Maximum
More informationOX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-304 The OX-304 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -173 dbc/hz in a compact
More informationVT-802 VT-802. Temperature Compensated Crystal Oscillator. Description
T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,
More informationThis bulletin is to notify all customers of the termination of the following Ecliptek series effective March 1 st, 2002:
Marketing Bulletin DATE: March 6, 2003 TO: FROM: RE: Affected Customers Mark Stoner Product Termination To all concerned parties, This bulletin is to notify all customers of the termination of the following
More informationVT-860 Temperature Compensated Crystal Oscillator
VT-860 Temperature Compensated Crystal Oscillator VT-860 Description Vectron s VT-860 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, Clipped sine wave output, analog temperature
More informationOX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-204 OX-204 The OX-204 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -175 dbc/hz. Designed
More informationCMOS/LVCMOS HF VCXO AE-X32BXX-X Series
CMOS/LVCMOS HF VCXO Description The AE-X32BXX Series of voltage controlled crystal oscillators (VCXO) provides high frequency with CMOS/LVCMOS output. The device does not use any frequency multiplication,
More informationVT-701 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC2
T-701 Temperature Compensated Crystal Oscillator Previous ectron Model TC2 T-701 Description ectron s T-701 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output,
More informationVTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator
VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator Features Clipped Sine Wave Output Output Frequencies to 27 MHz Fundamental Crystal Design Optional VCXO Function available Gold
More informationOX-171 Oven Controlled Crystal Oscillator
OX-171 Oven Controlled Crystal Oscillator OX-171 The OX-171 is a high stability ovenized crystal oscillator in a 28 x 38 mm package, capable of aging rates of 0.06 /day and temperature stabilities of 1
More informationVT-501 Temperature Compensated Crystal Oscillator Previous Vectron Model VTD3
T-501 Temperature Compensated Crystal Oscillator Previous ectron Model TD3 T-501 Description ectron s T-501 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog
More informationOX-175 Ultra Low Noise Oven Controlled Crystal Oscillator
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 The OX-175 is a low phase noise, high-frequency ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor of
More informationMD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator
MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator 2 MD-173 The MD-173 is a Microsemi Coefficient Oscillator (CCXO) that contains a high-stability ovenized crystal
More information2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Nominal frequency range
CFPT9000 -- SMD Temperature Compensated Crystal Oscillator (PLUTO) -- -- A series of surface mountable 7.0x5.0mm Temperature Compensated Voltage Controlled Crystal Oscillators (TCVCXOs) for medium to high
More informationRakon Product Proposal
RS1490P XO `Tiger' SMD Clock Oscillator Series High Performance PLL Crystal Clock Oscillator. Product description This PLL XO offers ultra low RMS phase jitter and high frequency stability in an industry
More informationVT-840 VT-840. Temperature Compensated Crystal Oscillator, Voltage Controlled Temperature Compensated Crystal Oscillator.
VT-840 Temperature Compensated Crystal Oscillator, Voltage Controlled Temperature Compensated Crystal Oscillator VT-840 Description Vectron s VT-840 Temperature Compensated Crystal Oscillator (TCXO) is
More informationVTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator
VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator Features CMOS Square Wave Output Enable Disable Feature Output Frequencies to 30 MHz Fundamental Crystal Design Optional VCXO function
More informationVX-703 Data Sheet VX-703. Voltage Controlled Crystal Oscillator Previous Vectron Model V-Type. Description. Features. Applications.
X-703 Data Sheet oltage Controlled Crystal Oscillator Previous ectron Model -Type X-703 Description ectron s X-703 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator
More informationOX-175 Ultra Low Noise Oven Controlled Crystal Oscillator
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 The OX-175 is a low phase noise, high-frequency ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor of
More informationO-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM)
O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM) Rev C The DFRM consists of 2 Ultra Low Phase Noise OCXO at 10 MHz and 100 MHz. The module is packaged
More informationVX-805 Voltage Controlled Crystal Oscillator
VX-805 Voltage Controlled Crystal Oscillator VX-805 Description The VX-805 is a Voltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
More informationTX-705 Temperature Compensated Crystal Oscillator
TX-705 Temperature Compensated Crystal Oscillator TX-705 Features Applications The TX-705 is a TCXO family designed for applications where superior g-sensitivity and good phase noise together with small
More informationVCC M CMOS Crystal Oscillator
CC1-1545-49M1520000 CMOS Crystal Oscillator CC1 Description ectron s CC1 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The CC1 uses a fundamental or 3rd overtone
More informationPerformance Specifications. Frequency Stabilities 1 ( MHz) -20 to +70 C -40 to +85 C -40 to +95 C Residual error compare to fit curve
MD-403 I2C InterfaceOven Controlled Crystal Oscillator MD-403 The MD-403 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates with an onboard
More informationPackage Type: 0 Through Hole Supply Voltage: V V V Logic: HCMOS Sine Wave
Description Q-Tech s High Stability OCXO is a high reliability signal generator that provides an HCMOS or Sine Wave output. The OCXO is available in a Through hole package. A flexible design allows Q-Tech
More informationQTCT570 SERIES 5 x 7mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to MHz Description
Description Q-Tech s surface-mount QTCT570 oscillators consist of an IC 2.8Vdc, 3.3Vdc clock TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range
More informationQTCT350 SERIES 3.2 x 5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 5.0Vdc MHz to 52.
Description Q-Tech s surface-mount QTCT350 oscillators consist of an IC 3.3Vdc, 5.0Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from
More informationMX-041 Oven Controlled Crystal Oscillator
MX-041 Oven Controlled Crystal Oscillator MX-041 Features Applications SC-Cut resonator Frequency Range: 5 MHZ to 20 MHZ Low Package Height Temperature stability to 0.4 Aging rate 0.1 /day Frequency range
More informationExcellent Integrated System Limited
Excellent Integrated System Limited Stocking Distributor Click to view price, real time Inventory, Delivery & Lifecycle Information: Abracon Corporation AST3TQ-T-10.000MHZ-50-C For any questions, you can
More informationRFPT Specifications. SMD Low Acceleration Sensitivity TCXO / TCVCXO. Product description. Applications
RFPT705 -- SMD Low Acceleration Sensitivity TCXO / TCVCXO. -- -- A series of surface mountable Temperature Compensated Voltage Controlled Crystal Oscillators (TCVCXO) for applications where phase noise
More informationVCC1 VCC1. CMOS Crystal Oscillator. Description. Features. Applications. Block Diagram. Output V DD GND E/D. Crystal. Oscillator
CC1 CMOS Crystal Oscillator CC1 Description ectron s CC1 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The CC1 uses a fundamental or 3rd overtone crystal resulting
More informationDescription. Block Diagrams. Figure 1b. Crystal-Based Multiplier w/saw
C-501 oltage Controlled Crystal Oscillator C-501 Description The C-501 is a voltage controlled crystal oscillator that is housed in a hermetic 14.0 x 9.0 x 4.5mm ceramic package. Depending upon the frequency
More informationVV-701 Voltage Controlled Crystal Oscillator Previous Vectron Model VVC1/VVC2
-701 oltage Controlled Crystal Oscillator Previous ectron Model C1/C2-701 Description ectron s -701 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator with a CMOS output.
More informationPerformance Specifications
TX-502 Temperature Compensated Crystal Oscillator High Precision TX-502 Features High Precision TCXO OCXO Replacement OCXO Temperature Performance Low power consumption Tight Tolerances Frequency range
More informationSpecification AXIOM210 Rev.: 3 Date: Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package
in Specification AXIOM210 Rev.: 3 Date: 2015-02-17 Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package Parameter min. typ. max. Unit Condition Frequency range 50 130 MHz Standard
More informationMX-503 High Precision Microprocessor Controlled Crystal Oscillator
MX-503 High Precision Microprocessor Controlled Crystal Oscillator MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50
More informationVS-708 Single Frequency VCSO
VS-708 Single Frequency VCSO VS-708 Description The VS-708 is a Voltage Controlled SAW Oscillator that operates at the fundamental or a fraction of the internal SAW filter frequency. The SAW component
More informationMX-600 Microprocessor Controlled Crystal Oscillator High Precision
MX-600 Microprocessor Controlled Crystal Oscillator High Precision MX-600 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-40
More informationPerformance Specifications
OX-280 Oven Controlled Crystal Oscillator OX-280 Features Surface Mount Package AT-CUT and SC_CUT Crystal Options Low Profile Compact Package Compact Package Applications Base stations Test equipment Synthesizers
More informationVX-705 Voltage Controlled Crystal Oscillator
X-705 oltage Controlled Crystal Oscillator X-705 Description The X-705 is a oltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
More informationTX-500 Temperature Compensated Crystal Oscillator
TX-500 Temperature Compensated Crystal Oscillator TX-500 Features Low Phase Noise Low power consumption Output: HCMOS, Clipped Sinewave, PECL, True Sinewave Tight Tolerances Frequency range 1 of 6.4-160
More informationVSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator
VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator Features CMOS output Output frequencies to 168 MHz Tri-state output for board test and debug -10/70 or 40/85 C operating temperature Gold over nickel
More informationVC-820 CMOS Crystal Oscillator
C-20 CMOS Crystal Oscillator C-20 ectron s C-20 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The C-20 uses a fundamental or a 3rd overtone crystal, oscillating
More informationOX-200 Oven Controlled Crystal Oscillator
OX-200 Oven Controlled Crystal Oscillator OX-200 Features Reflow Process Compatible AT-Cut and SC-Cut Crystal Options Low Profile Compact Package Applications Base Stations Test Equipment Synthesizers
More informationRakon Product Proposal
RTX5032A -- SMD Temperature Compensated Crystal Oscillator -- -- High performance TCXO offering excellent Phase Noise, Frequency Stability and VCO tilt compensation. -- Product description -- The RTX5032A
More informationMX-503 Microprocessor Controlled Crystal Oscillator High Precision
MX-503 Microprocessor Controlled Crystal Oscillator High Precision MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50
More informationVS-800 Ultra-Low Jitter High Frequency VCSO
VS-800 Ultra-Low Jitter High Frequency VCSO VS-800 Description The VS-800 is a Voltage Controlled SAW Oscillator that operates at the fundamental frequency of the internal SAW resonator. The SAW resonator
More informationPerformance Specifications. Frequency Stabilities 1 ( 10 & 20 MHz)
MD-223 I 2 C Interface Oven Controlled Crystal Oscillator Preleminary version MD-223 The MD-223 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates
More informationVVC1 VVC2 Voltage Controlled Crystal Oscillator
VVC1 VVC2 Voltage Controlled Crystal Oscillator Features The VVC1 Voltage Controlled Crystal Oscillator VCXO with a CMOS output Small 5.0 X 7.0 X 1.9 mm package Output frequencies to 66 MHz 5.0 or 3.3
More informationVVC4 Voltage Controlled Crystal Oscillator
C4 oltage Controlled Crystal Oscillator Features ectron s Smallest CXO, 5.0 X 3.2 X 1.2 mm High Frequencies to 77.70 MHz 5.0 or 3.3 operation Linearity 10% Tri-State Output for testing Low jitter < 1ps
More informationPLETRONICS TCD4 FEMTOCELL Series
TCD4 Femto 3.2 x 5.0 x 1.50 mm LCC Ceramic Package Features Pletronics TCD4 Femtocell Series Temperature Compensated Crystal Oscillator Optional Voltage Control Function Low Power / Fast Warm Up Clipped
More informationOven Controlled Crystal Oscillators
Moisture Sensitivity Level (MSL) 1 OVERVIEW: Abracon s AOCJYR series of World s Smallest Profile, Surface Mount- Ovenized Quartz Crystal Oscillators are based on Proprietary MercuryTM ASIC technology,
More informationVC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
More informationPLETRONICS NCF4 Series
NCF4 2.0 x 2.5 x 1.0 mm LCC Ceramic Package Electrical Characteristics Features Pletronics NCF4 Series Temperature Compensated Crystal Oscillator Optional Voltage Control Function Clipped Sine Wave Output
More informationVC-711 Differential (LVPECL, LVDS) Crystal Oscillator
C-7 Differential (LPECL, LDS) Crystal Oscillator C-7 Description ectron s C-7 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off either a 2.5 or 3.3 volt power supply
More informationModel 356P/L Advanced PLL LVPECL or LVDS VCXO
Features Ceramic Surface Mount Package Low Phase Jitter Performance, 500fs Typical Advanced PLL Design w/ Low Fundamental Crystal Frequency Range 10MHz 800MHz * +2.5V or +3.3V Operation Output Enable Standard
More informationVS-701 High Shock Discrete Voltage Controlled SAW Oscillator
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 The VS-701 VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
More informationOven Controlled Crystal Oscillators
Moisture Sensitivity Level (MSL) 1 OVERVIEW: Abracon s AOCJYR series of World s Smallest Profile, Surface Mount- Ovenized Quartz Crystal Oscillators are based on Proprietary MercuryTM ASIC technology,
More informationPARAMETER SYMBOL CONDITIONS VALUE UNIT
Page 1 of 6 FEATURES APPLICATIONS ±0.28 ppm Holdover Stability Mobile Phones ±4.6 ppm accuracy over all conditions Base Stations including 20 years aging Mobile Radios Miniature 5x7 mm SMD GPS Devices
More informationVC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
More informationOX-043 Low g-sensitivity Oven Controlled Crystal Oscillator
OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator OX-043 Features Applications Ultra Low g-sensitivity Low Phase Noise High Stability Frequency Range: 8 MHZ to 15 MHZ Standard Frequency 10 MHz
More informationModel 149 Stratum 3E, 9x14 mm OCXO
Features 10 to 50 MHz Frequency Range Compliant to Stratum 3E of GR1244CORE Surface Mount 3.3V or 5.0V operation Low Jitter/Phase Noise Tape and Reel Packaging Applications Telecom Switching Wireless Communication
More informationOX-400 / OX 401 Oven Controlled Crystal Oscillator
OX-400 / OX 401 Oven Controlled Crystal Oscillator OX-400 / 401 Features 4-Pin Dip Fast warm-up TCXO replacement for better short term stability Frequency Range, 10 MHz to 40 MHz Standard frequencies,
More informationProduct Specifications Approval Sheet
TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com
More informationTX-700 Temperature Compensated Crystal Oscillator
TX-700 Temperature Compensated Crystal Oscillator Features EFC Standard Small Size 0% RoHS Compliant Low Profile range of 6.4-52 MHz Standard Frequencies:, 12.8, 16.384, 19.44, 20, 20.48 MHz Applications
More informationDescription. Block Diagram. Complementary Output. Output. Crystal. Oscillator E/D
X-700 oltage Controlled Crystal Oscillator Previous ectron Model C-710 X-700 The X-700 is a oltage Controlled Crystal Oscillator that operates at the fundamental frequency of the internal HFF crystal.
More informationEX-421 Evacuated Miniature Crystal Oscillator
EX-421 Evacuated Miniature Crystal Oscillator EX-421 Description The EX-421 provides exceptionally low aging rates and tight temperature stabilities in an extremely small package over a wide range of environmental
More informationOX-221 Oven Controlled Crystal Oscillator
OX-221 Oven Controlled Crystal Oscillator OX-221 Features Surface Mount package SC_CUT Crystal Low Profile Compact Package standard frequency: 1, 2, 3.72 MHz Applications Base stations Test equipment Synthesizers
More informationPLETRONICS TCD3 Series
TCD3 3.2 x 5.0 x 1.50 mm LCC Ceramic Package Features Pletronics TCD3 Stratum-III Type Series Temperature Compensated Crystal Oscillator Optional Voltage Control Function Low Power / Fast Warm Up Clipped
More informationVC-801 CMOS Crystal Oscillator Previous Vectron Model VCC4
C-01 CMOS Crystal Oscillator Previous ectron Model CC4 C-01 ectron s C-01 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The C-01 uses fundamental or 3rd overtone
More informationSTRATUM 3E High Stability Oven Stabilized Oscillator OH300 Series OCXO / VCOCXO
Available at Digi-Key** www.digikey.com STRATUM 3E High Stability Oven Stabilized Oscillator OH300 Series OCXO / VCOCXO US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Description Connor-Winfield
More informationLow Noise Oscillator series LNO 100 OCXO LNO 100
Specific request can be addressed to RAKON info@rakon.fr Product Description This Low Noise Oven Controlled Crystal Oscillator available in different footprints from 38x38x22 mm (1.5 x1.5 x0.8 ) till 25x22x12
More informationVCC6-L/V 2.5 or 3.3 volt LVDS Oscillator
VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator Features 2.5 or 3.3 V LVDS 3rd Overtone Crystal for best jitter performance Output frequencies to 270 MHz Low Jitter < 1 ps rms, 12kHz to 20MHz Enable/Disable output
More informationQTCT220 SERIES 2.0 x 2.5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to 52.
5PeNdTbfTaY Q-Tech s surface-mount QTCT220 oscillators consist of an IC 3.3Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from 10.000MHz
More informationT C X O and Logic: TTL / HCMOS V C T C X O Wave Form: Square Wave
T C X O and Logic: TTL / HCMOS V C T C X O Wave Form: Square Wave Product Summary: SQUARE MERCURY Since 1973 TCXO VCTCXO Available Frequency Range Output Wave Form: Square Wave Package size (mm), L x W
More informationA DROP-IN REPLACEMENT SOLUTION FOR YOUR EMI / EMC COMPLIANCE PROBLEM
3HM57 Group R A DROP-IN REPLACEMENT SOLUTION FOR YOUR EMI / EMC COMPLIANCE PROBLEM The principle sources of the EMI problem come from the system clocks. Therefore, rather than patch the problem with ferrite
More informationC
Typical Applications Base Stations Test Equipment Synthesizers Digital Switching Features Surface Mount Package Optional Reflow Process Compatible Optional AT-Cut and SC-Cut Crystal Options Low Profile
More informationMD-403 I2C InterfaceOven Controlled Crystal Oscillator
MD-43 I2C InterfaceOven Controlled Crystal Oscillator MD-43 The MD-43 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates with an onboard
More informationLow Noise Oscillator series LNO 4800 B MHz
Specific request can be addressed to RAKON hirel@rakon.com Product Description LNO 4800 B3 is a low noise oscillator generating an output signal at 4800 MHz. It is composed by an OCSO (Oven Controlled
More informationParameter Conditions & Remarks Min Typical Max Unit. Warm up Steady 25 C Load Output to Ground pf
Model 1380100XXX Features Industry standard 20 x 12.7 mm SMT package Stratum 3E per GR1244CORE 3.3V operation Low Phase Noise Tape and Reel packaging Applications Telecom Switching Wireless Communication
More informationOD100LP-Series Low Phase Noise
OD100LP-Series Low Phase Noise VCOCXO1 Description: The Connor-Winfield OD100LP-series is a low phase noise VCOCXO in a 1x1 inch metal package. The OD100LP-series is designed for those applications that
More informationPreliminary. 2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Frequency 8 to 1500 MHz 2.2 Operating Temperature Range
RXO5032P SMD Clock Oscillator () High Performance XO in 5 x 3.2 mm Surface Mount package Product description The RXO5032P XO combines very low RMS phase jitter and tight frequency stability in a small
More informationPS-701 SAW Oscillator
PS-701 SAW Oscillator PS-701 The PS-701 SO (Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support high speed data converters and 100G / 400G coherent optical
More informationPLETRONICS THA3 Series
THA3 5.0 x 7.0 x 2.6 mm LCC Ceramic Package Features Pletronics THA3 Stratum-III Type Series Temperature Compensated Crystal Oscillator Optional Voltage Control Function Low Power / Fast Warm Up CMOS Output
More informationDescription. Block Diagram. Complementary Output. Output. Crystal. Oscillator. E/D or NC
CC6 LPECL, LDS Crystal Oscillator Data Sheet CC6 Description ectron s CC6 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off either a 2.5 or 3.3 volt supply, hermetically
More informationPSE Technology Corporation
PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY 24.000000 MHz PRODUCT TYPE TYPE FJ 2.5x2.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR SPEC. NO. ( P/N ) FJ2400002 CUSTOMER P/N
More informationTX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator
TX-707 Low g-sensitivity Temperature Compensated Crystal Oscillator TX-707 The TX-707 Series TCXO combines innovative manufacturing and the latest technology to provide low phase noise and excellent g-sensitivity.
More informationVS-504 Dual Frequency VCSO High Frequency
VS-504 Dual Frequency VCSO High Frequency VS-504 The VS-504 dual frequency VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
More informationPSE Technology Corporation
PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY 25.000000 MHz PRODUCT TYPE SPEC. NO. ( P/N ) TYPE FJ 2.5x2.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR CUSTOMER P/N ISSUE DATE
More informationHELLAS INDUSTRIES. for custom designs since 1980 in. Custom RF Filter & Frequency Control Solutions. Defence Avionics Medical Telecom
HELLAS Custom RF Filter & Control Solutions The Choice for custom designs since 1980 in Monolithic Crystal Filters Discrete Crystal Filters LC Filters Switch Filter assemblies Oscillators INDUSTRIES Defence
More informationLead Finish: T = Standard S = Solder Dip (**) Package Type: 0 = DIP-14 1 = SMD 2 = Gull Wing Supply Voltage: 3 = +3.3V 5 = +5.0V
Description The Q-Tech Analog TCXO encompasses state-of-the-art oscillators with low phase noise, jitter, and tight temperature stability. The TCXO is available in a DIP (QT3003), SMD (QT3013) or Gull
More informationLOW POWER TCXO & VCTCXO OSCILLATOR
PETERMANN-TECHNIK GmbH LOW POWER TCXO & VCTCXO OSCILLATOR SERIES TCVCTO-2 10.0 40.0 MHz FEATURES + 100% pin-to-pin drop-in replacement to quartz and MEMS based VCTCXO + Ultra Performance Oscillator for
More information